Upload File

starter-set cut 1000 - system 3r2 starter-set cut 1000 starter-set cut 1000, s 150 560: for ridged,...

  • Home
  • Documents
  • Starter-Set CUT 1000 - System 3R2 Starter-set CUT 1000 Starter-set CUT 1000, S 150 560: for ridged, stable and manual clamping of work pieces on your CUT 1000. Initial equipment for
4
Starter-Set CUT 1000

Upload: others

Post on 20-Feb-2020

10 views

Category:

Documents


0 download

Report

TRANSCRIPT

Page 1: Starter-Set CUT 1000 - System 3R2 Starter-set CUT 1000 Starter-set CUT 1000, S 150 560: for ridged, stable and manual clamping of work pieces on your CUT 1000. Initial equipment for

Starter-Set CUT 1000

Page 2: Starter-Set CUT 1000 - System 3R2 Starter-set CUT 1000 Starter-set CUT 1000, S 150 560: for ridged, stable and manual clamping of work pieces on your CUT 1000. Initial equipment for

2

Starter-set CUT 1000

Starter-set CUT 1000, S 150 560: for ridged, stable and manual clamping of work pieces on your CUT 1000.

Initial equipment for your WEDM machineThe WEDM CUT 1000 starter-set with clamping bar and clamping support is the ideal choice to maximise the performance from your GF AgieChar-milles WEDM machine CUT 1000. The elements are mounted quickly on the machine table and form the base unit for manual clamping of work pieces.

ApplicationThe set applies mainly to clamp, support and hold parts in the cutting envelope of the WEDM machine.

ExpandableThe CUT 1000 starter-set can be expanded with clamping elements from the ICS A range.

S 150 560 consists of:1x C 666 060 Clamping support 1551x C 557 300 CUT 1000 clamping bar "+4"/"0" 1x Set screws/extensions M8 1x E 100 007 Set hexagon Allen wrenchSupplied in a case

Option: ICS Mecavice AC 577 250

Option: ICS side clamp AC 577 200

Set CUT 1000 - S 150 560• Rigid and stable manual clamping of work pieces• No reference elements necessary• Clamping support & clam- ping bar with exchangeable support lips/distance plates „0“ or „+4“ for collision free clamping• Interface to support all clamping elements from the ICS A range• Clamps for flat parts

Page 3: Starter-Set CUT 1000 - System 3R2 Starter-set CUT 1000 Starter-set CUT 1000, S 150 560: for ridged, stable and manual clamping of work pieces on your CUT 1000. Initial equipment for

3

Collision free clampingThe supports „+4“, are included in the set, they lift the support lips of the clamping bar above zero line to remove any possibility of collision with the bottom wire guide. For the clamping support special support lips „0“ and „+4“ are included.

Support-clamping of work piecesThe clamping support 155 is mounted best in X axis on the machine table. It can be used in combination with the clamping bar or also as single clamp for „overhung clamping“ of smaller work pieces. All clamping elements ICS A for small parts can be mounted to the integra-ted ICS interface on the rear of the support.

Quick installationThe CUT 1000 clamping bar is moun-ted in Y axis of the WEDM machine. With the additional use of the Zeroline clamping support in X axis, the clam-ping elements enable a versatile and secure set-up of parts in the cutting envelope of the WEDM machine.

support lips „0“

’’0’’

’’+4’’

support lips „+4“for collision free clamping

Page 4: Starter-Set CUT 1000 - System 3R2 Starter-set CUT 1000 Starter-set CUT 1000, S 150 560: for ridged, stable and manual clamping of work pieces on your CUT 1000. Initial equipment for

A 00

0346

-E 2

008.

05

Sub

ject

to m

odifi

catio

ns •

Sys

tem

3R

, a m

embe

r of t

he G

eorg

Fis

cher

Gro

up

ASIA

Far East, China & IndiaSystem 3R Far East Pte.Ltd.6 Harper RoadLeong Huat Building, 01-01SINGAPORE SG-369 674tel +65-6289 4811fax +65-6289 3011e-mail: [email protected]

Shanghai Contact Office tel +86-21 6432 7927fax +86-21 6432 7928e-mail: [email protected]

Beijing Contact Officetel +86-10 8225 1632fax +86-10 8225 1635

Guangdong Contact Officetel +86-769 8162 0628fax +86-769 8162 0638

Malaysia Contact Officetel +60-03 7877 4785fax +60-03 7877 5948

Taiwan Regional Officetel +886-02 2278 3126fax +886-02 2278 3108

Japan & KoreaSystem 3R Japan CO., Ltd.Kaki Building2-5-22, Suido, Bunkyo-kuTOKYO JP-112-0005tel +81-03 5840-7383fax +81-03 5840-8723e-mail: [email protected]

Nagoya Regional Officetel +81-052 774 6250fax +81-052 774 6285

System 3R International ABSorterargatan 1, SE-162 50 VÄLLINGBYtel +46-08 620 20 00, fax +46-08 759 52 34, e-mail: [email protected], www.system3r.com

Combi, Delphin, Dynafix, Locx, LX, Macro, One Minute Set-Up, One System Partner, R2R, System 3R, VDP, WorkMaster, WorkPal, WorkPartner, WorkShopManager, 3HP, 3R, 3Ready-To-Run and 3Refix are registered trademarks of System 3R.

EUROPE

System 3R Europe GmbHWasserweg 19DE-64521, GROSS-GERAUtel +49 61 52 80 02 0fax +49 61 52 80 02 35e-mail: [email protected]

Chech Republic & SlovakiaSystem 3R CzechTiskarska 10/257CZ-108 28 PRAHA 10tel +420 234 054 224fax +420 234 054 225e-mail: [email protected]

France & PortugalSystem 3R France56 Boulevard de CourcerinLes Espaces Multiservices 15F-77183 CROISSY BEAUBURGtel +33-01 60 95 90 80fax +33-01 60 37 88 16e-mail: [email protected]

Germany & BeNeLuxSystem 3R DeutschlandWasserweg 19DE-64521, GROSS-GERAUtel +49 61 52 80 02 0fax +49 61 52 80 02 35e-mail: [email protected]

Italy & SpainSystem 3R ItaliaVia Ponchielli, 2/4IT-20063 CERNUSCO SUL NAVIGLIO (MI)tel +39 02 92 38 821fax +39 02 92 11 23 19e-mail: [email protected]

ScandinaviaSystem 3R NordicSorterargatan 1SE-162 50 VÄLLINGBYtel +46-08 620 20 00fax +46-08 759 52 34e-mail: [email protected]

Järfälla HärdverkstadElektronikhöjden 8SE-175 43 JÄRFÄLLAtel +46-08 580 125 50fax +46-08 580 126 55e-mail: [email protected]

Switzerland & AustriaSystem 3R Schweiz AGWilerstrasse 98CH-9230 FLAWILtel +41-071 394 13 50fax +41-071 394 13 60e-mail: [email protected]

TurkeySystem 3R TürkiyeAbdi Ipekci Cad. Ozel Idare Is Merk 150/209Bayrampasa 34030 ISTANBULtel +90-212 613 8062-8063fax +90-212 613 8069e-mail: [email protected]

United KingdomSystem 3R UKParadise WayWalsgrave Triangle Coventry, West MidlandsCV2 2ST, United Kingdomtel +44-02476 538653fax +44-02476 538695e-mail: [email protected]

AMERICAS

System 3R USA Inc.Headquarters & Technical Center915 Busse RoadELK GROVE VILLAGE, US-IL 60007tel +1 847 439 4888fax +1 847 439 5099e-mail: [email protected]

Canada & MImobile +1 519 870 8339fax +1 847 439 5099e-mail: [email protected]

AZ, CA, CO, ID, MT, NM, NV, OR, UT, WA, WY & Mexicomobile +1 714 299 4923fax +1 847 439 5099e-mail: [email protected]

IA, MN, ND, NE, SD & Western WImobile +1 612 963 6904fax +1 847 439 5099e-mail: [email protected]

AR, IN, KY, OH, TN, MO, KS, OK & Southern ILmoblie +1 317 694 7508fax +1 847 439 5099e-mail: [email protected]

AL, FL, GA, LA, MS, NC, SC & TXmobile +1 813 326 0125fax +1 847 439 5099e-mail: [email protected]

Nothern IL & Eastern WImobile +1 847 400 6073fax +1 847 439 5099e-mail: [email protected]

NJ, NY & PAmobile +1 201 248 3885fax +1 847 439 5099e-mail: [email protected]

CT, DC, DE, MA, MD, ME, NH, RI, VA, VT & WVmobile +1 201 214 7088fax +1 847 439 5099e-mail: [email protected]

For further information, see www.system3r.com


WEL COME REAL MARKETING Can change your life STARTER REAL MAKETING 1000/-Rs. WELCOME GIFT 5gm SILVER COIN

Installation Guide...starter strip to each other. Starter can be cut with tin snips when shorter lengths are needed. Other Starter Methods Starter strip may not work in all situations,

L1 Probability Starters Links Probability Starter 1Probability Starter 1 Probability Starter 1 SolnsProbability Starter 1 Solns Probability Starter 2Probability

Earn your Party Starter Kit FREE with only $1000 in Subtotal A

AgieCharmilles CUT 1000 CUT 1000 OilTech · 4 AgieCharmilles CUT 1000/CUT 1000 OilTech The world of micro dimensions GF Machining Solutions technology supports the increased miniaturization

ISUZU TF190 - rsaekstranett.rsa.no/Documents/Isuzu/Teknisk/Kurs/Ch18_Immobiliser... · ISUZU TF190 Starter cut relay 18.4. ISUZU TF190 System operation 18.5. ISUZU TF190 Transponder

Symbols electric motor starters - Electrical Symbols · Symbols Electrical Symbology Description Motor starter generic symbol Regulator starter Starter autotransformer Starter contactor

STARTER STARTER 1.31

QL-800 - Brother-usa.com...Apr 15, 2020  · • One starter roll of DK Die-cut Standard Address Labels (100 labels) • One starter roll of DK Continuous Length Black/Red on White

product starter kit · 2021. 1. 11. · CLEAN CUT FOAMY CUTTING OIL 891.7292 - 15.25 oz PRODUCT DEMONSTRATION Description Winzer’s Clean Cut Foamy Cutting Oil was created specifically

Fractions Starter: Equivalent Fractions This chocolate bar has been cut in half In how many ways can you write ½ using different fractions?

Tier Starter Professional Enterprise Starter Professional ......Text Area Fields 5 10 10 5 10 10 10 Rich Text Fields 2 2 2 2 2 2 2 Items per Picklist 1000 1000 1000 1000 1000 1000

nestle.jp · cut cut f cut cut cut cut v

CHURCH CAMPAIGN Starter Guide - Amazon Web Servicesfiles.faithgateway.com.s3.amazonaws.com/...campaign-starter-guide… · CHURCH CAMPAIGN Starter Guide This Starter Guide will walk

Assessment Booklet Starter A and Starter B

cut cut cut cut cut cut cut 92 Points 92 Points 92 Points

FULLOAD 1000 - FULBAT | Motorcycle battery702-000437-01-R FULLOAD 1000 BATTERY CHARGER For lead-acid batteries User Manual and Guide to professional battery charging for Starter and

LINKIN’ LOGS - Amazon S3 · Linkin’ Logs Gift oject. 17!/4 END VIEW FIRST: Note Starter logs are cut from completed logs Doors and windows cut from plywood on scroll saw Door

MARINE SURFACE FINISHING - Mirka · Start with P500 – Abranet® AceP800 (Abranet® Ace) – cut and performance for more 1000 – 3000 (Abralon®) Minor scratches Start with 1000

Start Delta Starter vs Soft Starter

Normal Distribution Starters Starter AStarter A Starter A Solns (z values)Starter A Solns Starter BStarter B Starter B Solns A Starter B Solns BStarter

Sage ERP 1000 - sage- · PDF fileSage ERP 1000 Graphical MPS User Guide ... Capacity Planning ... Rough-Cut Capacity Planning (RCCP), Finite Capacity Scheduling

Soft-Starter Arrancador Suave Soft-Starter - Wolf Automation · Soft-Starter Arrancador Suave Soft-Starter SSW-07 ... MANUAL DO USUÁRIO DA SOFT-STARTER ... WEG Soft- Starter Series

BATTERY CHARGER JUMP STARTER · BATTERY CHARGER Boost BATTERY CHARGER Transformer POWER SUPPLY JUMP STARTER 01. Spec / Model HYSC-1000 ... Output DC 6V 1A, DC 12V 1A Temperature Controlled

AgieCharmilles CUT 1000 CUT 1000 OilTech - Wire …...This wire cut machine is a benchmark in micro erosion. The benchmark for ultra accurate results in micro wire EDM applications

Starter Kit. Starter kit Production : Cut operations receiving ECN (Eng. Change Notice) Auto copy to prod orders details Shop floor reporting Generic

Home Freeze Dryer STARTER GUIDE - Coming Soon · Home Freeze Dryer STARTER GUIDE ... (skin side) resting on the tray with the cut side up. ... into the freeze dryer, pull the tray

L1 Starters A Links Starter 11Starter 11 Starter 11 SolnsStarter 11 Solns Starter 12Starter 12 Starter 12 SolnsStarter 12 Solns Starter 13Starter 13 Starter

AgieCharmilles Cut 1000

Starter Gramática unit - linglesaesopilar.wikispaces.com REFEREN… · 80 Starter unit Gramática Starter unit ... the children’s teacher the men’s chairs Uso ... Starter unit

CAPITAL BUDGETING - CUT | CUT,Chinhoyi · Web viewThe investment company is giving up $1000 of its wealth in exchange of an investment worth $1078.82. This means the investors wealth

Power Knot LLC. LFC-1000 Biodigester Cut Sheet, Revised 2019 …energia-on.com/wp-content/uploads/2019/03/Power_Knot_LFC-1000_… · LFC-1000 1450 346 585 Water output 4" (DN100)

MAGIC CUT 100 - Rotoricarotorica.ru/pdf/instrukciya-galagar-smart-cut-1000.pdf · 2016. 12. 14. · 2014-09 . 8.850.660-C . MAGIC CUT 100 AIR PLASMA CUTTER . IMPORTANT: Read this

ingersoll rand air starter solutions - mb air systems · PDF fileair starter solutions. ... and gas engines up to 1000 liters ... Patent-pending slip-fit modular motor design makes

Starter I will pass the nucleotides out. Cut the nucleotides out (other than the base you don’t have to cut out the lines. Create a DNA strand using this