Copyright 2021 Stolle Machinery Company, All Rights Reserved

C o n n e c t i n g

T E C H N O L O G Y L E A D E R S H I P I N C A N & E N D M A K I N G

Stolle Standun Bodymakers

Above: B7 or B6 Bodymaker

The Stolle family of Standun Bodymakers leads the industry in the production of two-piece DWI can bodies. These specialized horizontal presses are engineered to maintain the extremely close tolerances required in finished can bodies, and are ruggedly built to deliver a quality product day after day. Stolle offers several models of Standun Bodymakers that produce a wide range of can heights and diameters in either aluminum or steel material. The B7 is the only bodymaker designed for easy conversion to produce most popular beverage can sizes up to 500 ml with a single stroke length up to 400 SPM. The Standun B627A is the industry’s first B6 bodymaker specially designed to make thinwall aerosol can bodies, which use up to 50% less metal than three-piece aerosol.

The Standun tool cradle utilizes the Pride Modular Toolpack which maintains precise wall accuracy during sustained high speed ironing of can bodies. All Standun Bodymakers feature state-of-the-art mechanical components for the highest speeds and operating efficiencies, as well as an integral lubrication system, easy-access stainless steel covers and guards, and new modular components.

Standun B7 Bodymaker

• The only bodymaker that can produce most popular beverage can sizes up to 500 ml with a single stroke length at speeds up to 400 SPM*

• Steel can model available

Standun B6 Series Bodymakers• Six models for can heights from 3.00” (76.2mm) to 8.55” (17.2mm)

• Speeds from 250 to 400 SPM*, depending on can diameter and height

• Can diameters from 202 to 307

Standun B627A Series Bodymaker for Two-Piece Thinwall DWI Aerosol Cans

• Machine can be configured to produce a full range of typical aerosol can sizes, from 3.78” (96mm) to 8.30” (210.8mm) with a 27” stroke machine• Speeds up to 240 SPM*• Can diameters from 1.38” (35mm) to 2.88” (73mm)

* Machine speeds are determined by stroke length, can diameter and bodymaker mechanical configuration – see specifications on next page.

Production speeds are determined by plant operations and plant process control.

Heavy duty crankshaft assembly

Internal view of ram and hydrostatic cartridge guidance system

Plate heat exchangers effectively maintain machine

temperature during operation

Stolle Machinery Company6949 South Potomac Street, Centennial, CO 80112 USA

303.708.9044 ~ Fax 303.708.9045sales@stollemachinery.com ~ www.stollemachinery.com

S M A R T & T E C H N O L O G Y Stolle Standun Bodymakers

Specifications B7 or B6 SeriesWidth 6 ft. (1.8 m)Height 6 ft. (1.8 m)Length 13 ft., 5 in. (4.11 m) Weight 19,500 lbs. (8,845 kg)Floor space 10’ W x 14.6’ L = 145 sq. ft. (3 m W x 4.5 m L = 13.5 sq m) (including electrical console and working area)Air supply Minimum 85 psi (5.98 KgCm2), 50 SCFMWater supply 30 GPM at 85°F maximum (heat exchanger) (114 LPM at 29.4°C maximum) (for cooling machine lubrication system)Coolant supply (tool pack) 20 GPM minimum at 30 PSI (76 LPM minimum at 2.1 KgCM2) (customer to supply pump with filter assembly)Lubrication 50 gallons (189 liters) (lubricant required for integral system and hydrostatic system with lube-failure protection)Drive motor 75 HP AC (standard) / 100 HP for special applicationsElectrical power requirement 480V, 3-phase, 60 Hz (380–575V, 3-phase, 50 Hz optional)Main disconnect size 200 Amp (200% of load optional)On-machine hydraulics (standard) total connected horsepower 75 + 15 + 2 = 87 HP (pneumatic clutch/brake)Portable hydraulic unit (optional) total connected horsepower 75 + 15 + 5 = 95 HP (pneumatic clutch/brake)Clutch brake Air operated clutch, spring operated brakeCan diameters From 202 to 307

Standun Model Machine speed Maximum untrimmed can height Tool pack length B724 400 SPM Alum = 7.25” (184.2mm) 10.25” (260.35mm)B724ST 350 SPM Steel = 6.35” (161.29mm) 11.00” (279.4mm)B622 400 SPM 211 Alum = 5.44” (138.2mm) 10.25” (260.35mm) 202 Alum = 5.70” (144.8mm) Steel = 5.12” (130mm)B626 350 SPM Alum = 7.44” (188.9mm) 11.00” (279.4mm) Steel = 7.15” (181.6mm)B626ST 350 SPM Alum = 7.50” (190.5mm) 11.375” (288.9mm)B627 240 SPM Alum = 9.70” (246.38mm) 10.250” (250.35mm)B627A 240 SPM Alum = 9.180” (233.17mm) 9.375” (238.125mm)B630 300 SPM Alum = 8.55” (217.2mm) 13.50” (342.9mm) Steel = 8.25” (209.5mm)

Mark Santos – Primary Product Contact+1 303-708-5173 • mark.santos@stollemachinery.com

Zach Hart – Secondary Product Contact+1 303-708-5154 • zach.hart@stollemachinery.com

Mike Fitzgerald – Spare Parts +1 303-708-5168 • mike.fitzgerald@stollemachinery.com

Scott Davis – Field Service+1 303-708-5134 • scott.davis@stollemachinery.com