submitting ppap instructions apr 21 2010
TRANSCRIPT
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
1/19
Delphi E&S Instructions for
Submitting PPAP for Component
Parts to the PPAP Dropbox on
the www.delphisuppliers.com
Website
Revised 4/21/2010
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
2/19
These instructions apply to any of the following PPAP
submission scenarios for Delphi E&S components.For Purchased Components:
Select the drop Down Box (see page 8) Delphi E and SPPAPs
Initial part approval for all components Circuit Board routing to punching (normal course of
business) changes
New tools to replace worn out tools changes
Additional cavities being added/approved in an existingtool where other cavities have been approved on the initialpart approval
Approvals to additional revisions on custom, Product Line
owned parts (i.e. brackets, trimplates, pushbuttons, circuitboards, etc.) where the PL has already approved the change
Select the Drop Down Box (see page 8) DE PPAP forSCRs and DWG Update.
All other changes to parts that have Full PPAP approvaland do not fit the examples above.
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
3/19
1) Go to www.delphisuppliers.com/. If you are logging on the first time and need to request an
account, select External Users Request Account and submit a request for an account. If you
already have an account, select External Users Login.
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
4/19
2) After logging in, read the non-disclosure agreement and click accept at the bottom of the page.
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
5/19
3) After a successful log-in, you will select Upload File from the screen shown below.
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
6/19
How should your PPAP file be structured?
The PPAP file you upload needs to be zipped. It can be in a PDF format or itcan be multiple files that are zipped together.
Please make sure your file name contains the Delphi part number.
Please make sure your PPAP file has the 18 elements of PPAP (as defined inthe 4th edition AIAG PPAP manual), and make sure they are clearly identifiedto assist the approvers in locating their particular sections easily.
Please submit one part number per PPAP package. The only exception wouldbe parts on charts.
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
7/19
4) In the Upload File screen enter the file name or use the browse button to select the file to upload.
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
8/19
5) Select Delphi E and S PPAPs from the Group List menu. DO NOT USE the Select User dropdown list.
- For subsequent PPAP submissions related to SCR (Supplier Change Requests) use DE PPAPs for SCRs & DWG Updates.
Note: Refer to page 2 if unsure what types of PPAPs are to be submitted to this drop box. PPAP packages affected by condidions(execptions) noted on slide 2 shall be submitted as Initial PPAP Packages not as SCR PPAP packages.
6) Type in any comments you think may be helpful in the File Comment box.
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
9/19
7) When complete, the Upload File screen should look something like what is shown below. After you
have completed filling out the Upload File screen, click the Upload File button below the File
Comments box to submit the PPAP. You should receive an e-mail saying the file was successfullyuploaded.
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
10/19
Where do you send mechanical part samples ifapplicable?
Mechanical part samples should be shipped directly to the Delphi E&S
engineer your company is working with. If you do not have the Delphicontact information for shipping samples, then you can use the
following address information below. Please include a copy of the
PSW you submitted with your electronic PPAP package when
shipping sample parts.
Mailing Address for Mechanical samples for Initial PPAP:If you are not sure where to ship the samples, ship to one of the following docks at
Delphi E&S to the attention of PPAP Coordinator Jo Ellen Feazel. This is not
applicable for samples associated with Supplier Change Requests (SCR).
Delphi E&S
ERC, Plant 12
2705 Goyer Rd.
Kokomo, IN 46904
Delphi E&S
CTC, Plant 11
2151 E. Lincoln Rd.
Kokomo, IN 46904
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
11/19
The PSW (part submission warrant) must show the part drawing revision that is being PPAPed
the correct manufacturing duns code that will supply the part
the IMDS tracking number if the part is a purchased part
The drawing must be officially released in the Delphidrawing system.
The part must be officially sourced if it is a purchased part.
Requirements for a PPAP to be processed
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
12/19
Requirements for PSW / PPAP
PSW MUST be compliant to the AIAG Production PartApproval Process PPAP Manual, 4th Edition Reference Appendix A Completion of the Part Submission Warrant
(PSW) PPAP 4th Edition, page 22 23.
PPAP submissions for Chart Drawings ONLY, MUSThave an attached form with each part number listed as
indicated.
All PPAP documentation MUST be in English or includean accurate English translation on them.
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
13/19
Requirements for PSW
Delphi Part Name as on Delphi Drawing Delphi Part Number
Delphi P/N Supplier P/N
Delphi Drawing Revision Delphi Drawing Date
Supplier Mfg / Fab Site & DUNS
Supplier Mfg / Fab Site Address
Delphi Electronics & Safety
Check yes with IMDS number
Complete remaining form as specified in PPAP 4th
Edition, page 22
IMDS Number
0.0018 kg
X
Red wording is required - blank spaces put N/A if not applicable
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
14/19
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
15/19
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
16/19
PART NUMBER IS FOUND HERE
PART REVISION & DATE IS FOUND HERE
Drawing Revision
PSW Drawing Revisions (single part number)
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
17/19
Chart Drawing
Cover Page
Chart part number
Do Not Use on
PSW
Chart Revision
Do Not Use on
PSW
PSW Drawing Revisions (Chart part numbers)
Drawing Revision
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
18/19
Use this part Number &
Revision Number for the PSW
PSW Drawing Revisions (Chart part numbers)
Drawing Revision
-
8/13/2019 Submitting PPAP Instructions Apr 21 2010
19/19
Drawing Revision
PSW Drawing Revisions (Chart part numbers)
Chart Drawing
Cover Page
USE THIS DATE
ON PSW