summary of cost · for proposed regional office of bank of baroda, ajmer summary of cost (singature...
TRANSCRIPT
Summary of Cost
RO BANK OF BARODA, AJMER
Price Bid for interior furnishing, electrical
and HVAC work
ARPITA JAIN AND ASSOCIATESARCHITECT AND INTERIOR DESIGNER
S.no Description of work Amount Quoted (Rs.)
1 FURNISHING WORK
2 ELECTRICAL WORK
3 AIR CONDITIONING WORK
TOTAL
NET TOTAL QUOTED AMOUNT
SAY RS. IN LACS
NOTE:- The bidder shall quote the rate inclusive of GST in the resepective schedule
of the work.
Place
Date
INTERIOR FURNISHING/ELECTRICAL/HVAC WORK
FOR PROPOSED REGIONAL OFFICE OF BANK OF BARODA, AJMER
SUMMARY OF COST
(Singature of the Contractor with seal)
112
BOQ -FURNISHING WORK
BANK OF BARODA, AJMERPrice Bid for interior furnishing, electrical
and HVAC work
ARPITA JAIN AND ASSOCIATES
ARCHITECT AND INTERIOR DESIGNER
S.
No.
DESCRIPTION OF ITEM QTY UNIT RATE TO
BE
QUOTED
Amt.(Rs)
1 Gypsum Board False ceiling :-Providing & fixing GypsumBoard False ceiling with Saint Gobain "ULTRA" Mainceiling sections at 1200 c/c & Cross members at 450 c/c.The grid work to be suspended from ceiling with Hangersat every 1200 c/c both directions, as per manufacturer'sspecifications. False ceiling is finished with 12.5 mm thk. tobe screwed to the frame. The board is finished with fillingthe tapered edges of the board with jointing compound andfinishing with PAPER tape of INDIA GYPSUM. The ceilingis finished with acrylic Emulsion Paint inculding base asper approved manufacturer. The item includes allnecessary cut outs for electrical / air conditioning grills andnecessary frame work for them. Item includes Coves,curves, drops etc. (Only Plan area is considered for areacalculations)
300.00 Sq Mts
ARMSTRONG CEILING :- Providing & Fixing of Armstrong
Suspended Ceiling System with DUNE SUPREME Tiles(Bev. Teg. edge). The tiles should have 20 Year Waranteewith Humidity Resistance of 99%, Light Reflectance >85%,NRC = 0.50, Sound Attenuation = 34db, ThermalConductivity k = 0.06 w/m k, Colour White, FirePerformance Euroclass A2-S1,d0 module size of 600mm x600mm x 15mm laid on Armstrong Silhouette profile gridsystem with 15mm white flanges incorporating a 6mmcentral reveal in black colour. Silhouette, Main Runners &Cross Tees to have mitred ends & “birds mouth” notches toprovide mitred cruciform junctions.
230.00 Sq Mts
ARMSTRONG SUSPENSION SYSTEM To comprise mainrunner spaced at 1200mm centres securely fixed to thestructural soffit by approved hangers at 1200mm maximumcentre & not more than 150mm from spliced joints. Thelast hanger at the end of each main runner should not begreater than 600mm from the adjacent wall.1200mm long cross tees to be interlocked between mainrunners at 600mm centre to form 1200 x 600 mm module.Cut cross tees longer than 600mm require independentsupport. 600 x 600mm module to be formed by fitting600mm long cross tees centrally between the 1200 mmcross tees. The 1200mm cross tees to have central ”birdsmouth” notches to facilitate fitting of 600mm cross tees. Perimeter trim to be Armstrong wall angles Size19x19x3000mm secured to walls at 450 mm maximumcentres.Rate to include making necessary cut- outs or openings forlight fixtures etc, complete.
BOQ OF FURNISHING WORK FOR PROPOSED REGIONAL OFFICE AT AJMER
2
113
BOQ -FURNISHING WORK
BANK OF BARODA, AJMERPrice Bid for interior furnishing, electrical
and HVAC work
ARPITA JAIN AND ASSOCIATES
ARCHITECT AND INTERIOR DESIGNER
S.
No.
DESCRIPTION OF ITEM QTY UNIT RATE TO
BE
QUOTED
Amt.(Rs)
3 Providing and fixing Wooden False ceiling with 12mmBWR ply finished with 4mm Veneer with Grooves (baseprice of veneer ply Rs.150/ s.ft without tax) finish fixed overframe work of 25mmx50mm Marandi wood as per designand hanged from RCC ceiling with proper MS Anglehangers. The ceiling inculding teak wood batten Size 2400lenght 125 wide 75 depth.The ceiling to be finished inMelamine polish complete in all respect.(As/ArchitecturalDrawing)
10.00 Sq Mts
4 LOW HEIGHT PARTITION
Providing and Fixing of low height wooden partition (up to4'-6" height) made of 2 MM thick Aluminium tube frameThe sections are placed @ 600 x 600 MM C/C both waysand additionally at openings or ends as required. Sectionsare joined by Aluminium angle cleats and the frame is fixedto wall, floor with suitable aluminium angles and fastenedwith steel screws.Frame size 50 x 50 MM with 9 MM thickBWR Ply finished with 1mm thk Laminate as per approvedcolour,design, shape and size,including fixing rubber wood/Teak wood beading having size (75x25) mm as requiredto be provided at every exposed section of the partitionfollowed by melamine polish nculding Anti TermiteTreatment/Melamine polish.Complete in all respect andsatisfacation,instructed by Architect/Engg. The rate ofproviding and fixing 12 mm polished float glass will also beincluded in this item for measurement purpose. The glasswill be fixed at partition with rubber wood beading havingsize (75X25) mm with provision of 12 mm wide groove atall sides where glass to be fixed followed by melaminepolish in all respect.
138.00 Sq Mts
5 FULL HEIGHT WOODEN GLAZED PARTITION
Providing and Fixing of full height wooden glazed partitionmade of 2 MM thick Aluminium tube frame The sectionsare placed @ 600 x 600 MM C/C both ways andadditionally at openings or ends as required. Sections arejoined by Aluminium angle cleats and the frame is fixed towall, floor & ceiling with suitable aluminium angles andfastened with steel screws.Frame size 50 x 50 MM with 9MM thick BWR Ply with 1mm thk. Laminate in approvedcolour,design, shape and size, & 12mm thick toughnedglass panel fixed upto falce ceiling bottom inculding allexposed surface with rubber wood/ teak beading 25 mmthk as required and instructed by Architect and teak wooddoor frame in between the partition. inculding Anti TermiteTreatment/Melamine polish.Complete in all respect andsatisfacation of Architect/Engg.
86.00 Sq Mts
6 FULL HEIGHT GLASS PARTITION
114
BOQ -FURNISHING WORK
BANK OF BARODA, AJMERPrice Bid for interior furnishing, electrical
and HVAC work
ARPITA JAIN AND ASSOCIATES
ARCHITECT AND INTERIOR DESIGNER
S.
No.
DESCRIPTION OF ITEM QTY UNIT RATE TO
BE
QUOTED
Amt.(Rs)
a Providing & fixing 12mm toughened fixed glass partitionupto the false ceiling height. The glass fixed with S.Schannel inserted in floor and fixed to wooden member inthe false ceiling. The size of glass to be bigger in width.The edges of glass to be polished and if joints are neededthe joints to be filed with matching silicon complete.
10.00 Sq.mt
b Providing and fixing frame less patch fitting 12mm thk.toughend glass doors without frame moving on doubleaction hydraulic heavy duty floor spring and pivot on top ofapproved make including cutting, embedding and SS coverplate etc.The item includes SS handle 25mm dia and 2' 0"length with patch fitting glass mortice lock etc.(Fittingsozone,Doorma, haffle or equivalent make)
21.00 Sq Mts
7 FULL HEIGHT SOILD PARTITION
Providing and Fixing of full height wooden partition madeof 2 MM thick Aluminium tube frame The sections areplaced @ 600 x 600 MM C/C both ways and additionally atopenings or ends as required. Sections are joined byAluminium angle cleats and the frame is fixed to wall, floor& ceiling with suitable aluminium angles and fastened withsteel screws.Frame size 50 x 50 MM with 9 MM thickBWR Ply with 1mm thk. Laminate in approvedcolour,design, shape and size, inculding all exposedsurface with rubber wood/ teak beading 25 mm thk asrequired and instructed by Architect and teak wood doorframe in between the partition. inculding Anti TermiteTreatment/melamine polish.Complete in all respect andsatisfacation of Architect/Engg.
15.00 Sq Mts
8 DOORS
a Providing & fixing Glazed door with 100x50 MM TeakwoodFrame (chaukhat). The door shutter to be made from125x35MM Teakwood sides and top members with bottomrail of 200x40 MM Teakwood member. Item includes 8mm.toughened etched glass fixed with Teakwood beading14x12mm. The door is to be complete with Mortise Lock &SS handle (Hettich, Dorset, Godrej), S.S Stopper, DoorCloser,4 no 125mm S.S. hinges etc. all wood surfaces tobe melamine polish Rubbing poilishing etc complete to thesatisfaction of Architect / Engg. Size of Opening : 1000 x2100 (Approx.)
6.30 Sq.mt
115
BOQ -FURNISHING WORK
BANK OF BARODA, AJMERPrice Bid for interior furnishing, electrical
and HVAC work
ARPITA JAIN AND ASSOCIATES
ARCHITECT AND INTERIOR DESIGNER
S.
No.
DESCRIPTION OF ITEM QTY UNIT RATE TO
BE
QUOTED
Amt.(Rs)
b Providing and fixing 35 mm Flush doors with 1.0 mm thk.laminate on both sides as per design. Edges of door tohave 6mm thick Teakwood lipping. The item includesProviding and fixing chaukhats made from 75mm x 40mmTEAK wood members. Item includes all following items /finishes: hardware such as 4 nos. 125mm SS hinges, SStower bolts,Door Closer,Mortise Locks with SS handles(Hettich, Dorset, Godrej). Item includes polishing allwooden surfaces with Deco paint Rubbing poilishing etcincluding preparing base.
30.00 Sq.mt
9 SOFT BOARD
a Providing and fixing of soft board with cloth (approved byArchitect) of required on low ht partition/wall , inculdingfixing, hardware/adhesives complete in all respect.(Basicrate of cloth to be Rs 200/Sq.mt)
27.00 Sq.mt
10 Providing fixing and pasting Wall paper as per design &details. The item includes making POP base to get auniform smooth surface. (base Price Rs. 200/ sqft.withouttaxes) The fixed area of wall paper shall be considered forpayment and not the area of procured material.
30.00 Sq Mts
11 Providing and Fixing of wooden Panelling of wall on halland column made of 2 MM thick Aluminium tube frameThe sections are placed @ 600 x 600 MM C/C both waysand additionally at openings or ends as required. Sectionsare joined by Aluminium angle cleats and the frame is fixedto wall, floor & ceiling with suitable aluminium angles andfastened with steel screws.Frame size 25 x 50 MM with 9MM thick BWR Ply with 1mm thk. Laminate in approvedcolour,design, shape and size, inculding Anti TermiteTreatment.Complete in all respect and satisfacation ofArchitect/Engg.
132.00 Sq.Mts.
12 Providing and fixing Storage cabinet 380/450mm deep and750/900/2100/2400 mm high length as/deign as shown indetails with top all sides, shelves to be 18-19 mm thk.BWR ply with 6mm BWR ply to be fixed at the backfinished with 0.8mm laminate. The shutters/sides/top to be18-19mm BWR ply,finished with 1mm thk laminate. Allinternal surfaces to be finished with white Paint. All edgesof sides, shelves and shutters to have 2mm PVC Edgebinding tape as per details, complete including S.S. longhandles, self closing hinges, locks, etc. complete to thesatisfaction of Architect /Bank's Engg. (Only front elevationto be considered for area calculation)
83.00 Sq Mts
116
BOQ -FURNISHING WORK
BANK OF BARODA, AJMERPrice Bid for interior furnishing, electrical
and HVAC work
ARPITA JAIN AND ASSOCIATES
ARCHITECT AND INTERIOR DESIGNER
S.
No.
DESCRIPTION OF ITEM QTY UNIT RATE TO
BE
QUOTED
Amt.(Rs)
13 Providing and fixing over head storage cabinet in kitchen /pantry area 380mm deep and 675mm high length as/deignas shown in details with all sides, shelves to be 18-19 mmthk. BWR ply with 6mm BWR ply to be fixed at the backwith 0.8mm laminate. The shutters to be 18-19mm BWRply, with 1.0 mm laminate. All internal surfaces to befinished with white enamel paint.. All edges of sides,shelves and shutters to have 2mm PVC Edge binding tapeas per details, complete including S.S. long handles, selfclosing hinges, locks, etc. complete to the satisfaction ofArchitect /Bank's Engg. Only front elevation to beconsidered for area calculation.
5.00 Sq.mt
14 Providing and fixing storage cabinet (below platfrom) inkitchen/pantry The Front frame and shutters inculdingpartition to be 18-19mm BWR ply finished with 1.0 mm thklaminate. All edges of shutters to have 2mm PVC Edgebinding tape as per details, complete including S.S. longhandles, self closing hinges, locks, etc. complete to thesatisfaction of Architect /Bank's Engg. Only front elevationto be considered for area calculation.All internal surfacesto be finished with white paint
5.00 Sq.mt
15 Display cabinet in Reception area 380 mm deep in made of 18-19 mm BWR ply inculding openable shutters/glassshutter, 12 mm thk toughened glass for shelves and 12mmphenol bonded ply and 6mm phenol bonded ply with 1 mmdesigner laminate including all hardware , designerhandles , , hinges , locks, channels including painting and
polishing from inside and all visible areas with whitelaminate of 1mm thick instead of polishing.Complete in allrespect. inculding Anti Termite Treatment. All internalsurfaces to be finished with white paint
5.00 Sq Mts
16 ROLLER BLIND :-Providing & fixing roller blindscomprising of polymer coated fibre fabric with minimumopenness factor of 3% as per AS standards. The fabricshall be fire retardant and have high heat reflection ratios.The roller mechanism shall be a moulded unit made fromengineering grade plastic polymer with steel springsupport. The fabric shall be finished on the sides with edgetape duly welded for waviness control. The fabric shall beattached to the roller tube with high quality self adhesivetape. Average width of blinds shall be 2000mm and fall of3000mm with manual operation.
Headrail: shall be .812" high x 2" deep extruded aluminum
headrail with a wall thickness of 0.045” and painted tocoordinate with fabric color.
117
BOQ -FURNISHING WORK
BANK OF BARODA, AJMERPrice Bid for interior furnishing, electrical
and HVAC work
ARPITA JAIN AND ASSOCIATES
ARCHITECT AND INTERIOR DESIGNER
S.
No.
DESCRIPTION OF ITEM QTY UNIT RATE TO
BE
QUOTED
Amt.(Rs)
Cord lock: shall be a snap-in design of injection-moldedthermoplastic incorporating a metal, free-floating, serratedcord-locking roller.
Lift cord: shall be 1.2mm polyester and concealed for aclean appearance. A snap tassel and joiner ball connect toa single Danskord for raising and lowering the shade.Cord, tassel and joiner ball are color coordinated withfabric.
Installation: Bracket shall be low profile, hidden snap-indesign made of 0.025” zinc-plated spring steel.
Bottomrail: shall be 0.375" high x 2" deep extrudedaluminum with a wall thickness of 0.045” and painted tocoordinate with fabric color.
Fabrication Shades shall be fabricated according tospecifications and accurate to tolerance established bySWF engineering standards
Basic Cost: Rs 1000 per sm
Make: Hunter douglas/ Roselle/winfab/vista . 60.00 Sq.Mts.
17 Providing and fixing wooden tables made up of 18-19 BWR Ply , finished with 1mm thk Laminate all edges oftable and front or side. All internal surface of table to befinished with white enamel paint..Drawer unit to be madefrom only FASCIA 19mm BWR ply but the inner drawersmade from 12mm Bwr Ply.and 19mm BWR ply FASCIAfinished with 1mm thk Laminate .The drawers to run ontelescopic drawer channels (Hettich, Kaff, ozone). Drawerunits to have two smaller and one bigger drawers.andlocking arrangement (Godrej/ Hettich/ Dorset). InculdingTeak lipping 6mm thk as required to be provided at everysection of ply.Footrest of 75x50mm 2nd class teakwoodmember to be fixed for each table with melamine polish onexpoed teak wood surface /lipping, the rate to include allhardware such as drawer channels, S.S handles, singlelock for three drawers etc. The item also includes a key-board tray running on telescopic channel, made from19mm BWR Ply finished with 1.0 mm laminate on top andteakwood round moulding in front (size of key board
560x450) readymade CPU trolley with castors etc The
table size is taken to be as per following details.
(a) 1200mm wide x 750mm depth x750mm height. 2.00 Nos
(b) 1500mm wide x 750mm depth x750mm height. 17.00 Nos(c) 1350 mm wide x 750mm depth x750mm height. 2.00 Nos
(d) 1800 mm wide x 900 mm depth x750mm height. 1.00 Nos(e) 2100 mm wide x 900mm depth x750mm height. 1.00 Nos
118
BOQ -FURNISHING WORK
BANK OF BARODA, AJMERPrice Bid for interior furnishing, electrical
and HVAC work
ARPITA JAIN AND ASSOCIATES
ARCHITECT AND INTERIOR DESIGNER
S.
No.
DESCRIPTION OF ITEM QTY UNIT RATE TO
BE
QUOTED
Amt.(Rs)
18 Providing and fixing wooden running counter (600 mm
wide) fixed with partition made up of 18-19 BWR Ply ,finished with 1mm thk Laminate all edges of table and frontor side. All internal surface of table to be finished withwhite paint..Drawer unit to be made from only FASCIA19mm BWR ply but the inner drawers made from 12mmBwr Ply.and 19mm BWR ply FASCIA finished with 1mmthk Laminate .The drawers to run on telescopic drawerchannels (Hettich, Kaff, ozone). Drawer units to have twosmaller and one bigger drawers.and locking arrangement(Godrej/ Hettich/ Dorset). Inculding Teak lipping 6mm thkas required to be provided at every section of ply.Footrestof 75x50mm 2nd class teakwood member to be fixed foreach table with melamine polish on expoed teak woodsurface /lipping, the rate to include all hardware such asdrawer channels, S.S handles, single lock for threedrawers etc. The item also includes a key-board trayrunning on telescopic channel, made from 19mm BWR Plyfinished with 0.8mm laminate on top and teakwood roundmoulding in front (size of key board 560x450) readymadeCPU trolley with castors etc
43.00 RM
19 LACQUERED GLASS PANELLING :-Providing and Fixing
of wooden Panelling of wall on hall and column made of 2MM thick Aluminium tube frame The sections are placed @600 x 600 MM C/C both ways and additionally at openingsor ends as required. Sections are joined by Aluminiumangle cleats and the frame is fixed to wall, floor & ceilingwith suitable aluminium angles and fastened with steelscrews.Frame size 25 x 50 MM with 9 MM thick BWR Plywith 6mm colour lacquered glass in approvedcolour,design, shape and size, inculding Anti TermiteTreatment.Complete in all respect and satisfacation ofArchitect/Engg.
6.00 Sq.Mts.
20 Providing and fixing Side Credenza/ table made from
19mm BWR Ply for sides, shelves, top and shutters. Thetable exposed areas front,top and sides to be finished in1mm thk Laminate All internal surface of table to befinished with white paint, all edges of table Inculding Teaklipping 6mm thk as required to be provided at everysection of ply.complete with base as required. Itemincludes all hardware such as Self closing hinges, SShandles, Locks etc. complete. Rest of specifications to be
same as for main furniture. size of side table 900/1000
x450 x 750.
23.00 Nos
119
BOQ -FURNISHING WORK
BANK OF BARODA, AJMERPrice Bid for interior furnishing, electrical
and HVAC work
ARPITA JAIN AND ASSOCIATES
ARCHITECT AND INTERIOR DESIGNER
S.
No.
DESCRIPTION OF ITEM QTY UNIT RATE TO
BE
QUOTED
Amt.(Rs)
21 Providing & placing in position Conference room table size as per drawing made from 25mm BWR Ply topfinished with 1 mm thick laminate as per approved shade .All internal surface of table to be finished with white paint.Base and modesty to be made from 18-19mm BWR Ply.Top is supported on teak wood frame with 75x50mm teakwood members placed as per detail Drawings, The Tabletop to have 75x50 mm rubber wood/teak wood mouldingon edges. Table top & moulding to be polished with MFP.U Matt finish after preparing base as per manufacturer'sspecifications. Table to have all RGB & AV connectivitywith pneumatic POP-UP plate (Legrand, Crab tree orequivalent), complete to the satisfaction of Engineer /Architect (Only Table top is considered for areacalculations) (Only Table top is considered for areacalculations)
15.24 RM
22 Providing and fixing corner tables with 19 mm BWR Plylegs finished in 1 MM laminate. Item includes 10mmbevelled brown glass fixed in 25 MM SS spacers on top. ofsize of table 500x500x450 MM.
2.00 Nos
23 Providing and fixing Centre tables with 65 x 65 MM teakwood Legs and frame made from 65x35mm member andmelamine polish complete . Item includes 10mm bevelledbrown glass fixed in 25 MM SS spacers on top. of size oftable 900x900x450 MM.
2.00 Nos
24 Providing and fixing Dining area tables with base structuremade from 50mm SS round pipes and 6m SS strips. Thetop frame to be of 35x35mm Square SS pipes. The tabletop to have 18-19mm BWR ply finished with 12mm thicksynthetic acrylic surface (corian / Formica or equivalent)thermoformed to give rounded edge complete Table size2400x900x750
2.00 Nos
Providing and fixing notice boards with 19mm BWR Plysides with 1.0 mm Laminate finish and 8mm clear glassShutters fixed on pivots. The back to have 6mm thk BWRPly and 12mm soft board covered with cloth of approvedshade. Item includes all hardware such as push catcher,lock for glass shutters etc complete including polishing theteak surfaces.
Size 1200x600 & 150 deep 1.00 Nos26 Providing and fixing Bank Logo engraved in SS Plate 304
grade 16 guage with LOGO as per bank's instruction.Theplate to be fixed on wall/Panelling Partition with ss spacersas per detail.Complete in all respect. (Size 450x450 mm)
1.00 nos
27 Providing and fixing of 3M film Digital colour Printed as
per design
12.00 Sq Mts
28 Providing and fixing 12mm thk corian Flower pot size15"x15"as/design and specification
2.00 Nos
25
120
BOQ -FURNISHING WORK
BANK OF BARODA, AJMERPrice Bid for interior furnishing, electrical
and HVAC work
ARPITA JAIN AND ASSOCIATES
ARCHITECT AND INTERIOR DESIGNER
S.
No.
DESCRIPTION OF ITEM QTY UNIT RATE TO
BE
QUOTED
Amt.(Rs)
29 Providing & fixing 6 mm colour lacquered glass to be fixedon Furniture/Partition/Panelling,complete in all resparct.as/design and specification
5.00 Sq.mt
30 Providing and fixing 12mm thick MDF cut jaali as per sizeand details. The Jali to be finished in PU paint finish inapprovedcolour complete
10.00 Sq Mts
31 Providing & fixing Decorative wall Paintings in woodenframes on wall as approved of base prize Rs.1500/- to1800/- each
7.00 Sq Mts
32 SS Dustbin 12" dia 1'-3" height 12.00 Nos33 Providing and fixing 10 mm thick float glass with proper
grinding and polishing the edge with bevelled edge to befixed on table top as per size and requirement complete inall respect
24.00 Sq.m
PAINT WORK
34 Providing and applying three coats of pre-approved Plasticacrylic emulsion paint to walls, partitions etc. includingsurface preparation with two coats of putty, primer andsanding all complete. With the necessary drying periodsfor each coat. The final finish should be of a uniform andneat finish to the satisfaction of the Architect. Cost toinculde for all heights and surfaces , complete in all respect(Low VOC contain paint) Make: ICI DULUX ,Asian Paints.
450.00 Sq Mts
35 Providing and applying plaster of paris (super fine quality)punning with minimum thickness of 6mm and finish thesurface smooth in line and also making groove, level to theentire satisfaction of Architect including scraping andhacking the existing finished surfaces, scaffolding etc.complete in all respect
200.00 Sq Mts
36 Painting two coats of enamel paint (Asian/BERGER )including scrubbing, sand paper, making base applyingprimer etc complete in all respect in , grills etc.complete inall respect
50.00 Sq Mts
37 Painting exterior surface of Wall with100%acrylic exteriorpaint of approved brand and manufacture to give an evenshade with two or more coats including prepartion of basewith sand papering,primer,putty,etccomplete in all respect.
100.00 Sq Mts
38 Providing and painting texture paint (Base price 70/ S.FT)in two or more shades with roller and spray, after preparingthe base for the same (Unitile or Asian/okias)
45.00 Sq Mts
39 Providing and fixing 1.0 mm thick glossy finish laminate onexisting wooden surface with adhesive as per design andpattern as approved by architect/consultant
50.00 Sq Mts
Total (FURNISHING WORK)
121
BOQ -FURNISHING WORK
BANK OF BARODA, AJMERPrice Bid for interior furnishing, electrical
and HVAC work
ARPITA JAIN AND ASSOCIATES
ARCHITECT AND INTERIOR DESIGNER
S.
No.
DESCRIPTION OF ITEM QTY UNIT RATE TO
BE
QUOTED
Amt.(Rs)
1 CHAIRS
a Manager Chair PCH 7000 (GODREJ),MHB Premium
series(Methodex), Bodyline HBG (featherlite)
2.00 NOS
b Meidum Back Chair PCH 7001(GODREJ),MMB Premiumseries (Methodex), Bodyline MBG (Featherlite )
20.00 NOS
c Low Back Chair for Normal officer with Arm PCH 7002,(GODREJ) , X-102 ( Methodex), Bodyline LBG(featherlite)
15.00 NOS
d Visitor chairs with out arm for PCH 7004 (GODREJ) ,X-104
( Methodex), Bodyline Val -5 (featherlite)
15.00 NOS
e Conference chairs PCH 7002 (GODREJ) , MMB Premium series( Methodex), Bodyline MBG (featherlite)
55.00 NOS
g Dining area chairs Café-01 ( Methodex) , Staq (GODREJ),Magna without Castor (CP)(featherlite)
8.00 NOS
2 SOFA
a Providing & fixing of sofa chiars measuring 2'-0" x 2'-3" x15" (HT), with back Ht. 30" made out of T.W. 3"x1.5"Supporting fraing, Tata Make Jalebi Spring, Newar, tat,with stitching, Slopes/Countours, hemmings with seat of 4"thick, best quality ISI 50 density Foam for seat & 2" forback & arms with fabric tapestry, including TWmouldings/Frame, as approved by the Consultant.
6.00 NOS
Date:- (Signature of the Bidder with Seal)
Place:-
G.TOTAL (FURNISHING)
Total (LOOSE FURNITURE)
FURNITURE CHAIRS
122
BOQ OF ELECTRICAL WORK
REGIONAL OFFICE, BOB, AJMER
Price Bid for interior furnishing, electrical and HVAC work
ARPITA JAIN AND ASSOCIATESARCHITECT AND INTERIOR DESIGNER
S.No. Description Unit Qty. Rate to
be quotedAmount (Rs.)
A) MV PANEL BOARDS
Design, fabrication, loading, unloading at store, installaton,
testing & commissioning as directed by Engineer-in-Charge, of
LT Panels fabricated out of 2mm thick for structural members
(Load bearing members) and 1.6mm thick for door and covers
(Non load bearing members) CRCA sheet in cubicle
compartmentalize free standing floor mounted, dust and
vermin proof with reinforcement of suitable size angle iron,
channel 'T' irons and / or flats wherever necessary, 16 gauge
CRCA sheet steel shall be used for final distribution panels.
Cable gland plates shall be provided on top as well as at the
bottom of the panels. Panels shall be treated with all
anticorrosive process before painting as per specifications with
2 coats of zinc chromate primer and final approved shade of
enamelled paint. 2 Nos. earthing terminals shall be provided
for all distribution panels. Panels shall be suitable for 415V, 3-
phase, 4-wire, 50Hz supply system and with 15% spare space,
lifting hooks shall also be provided in case of large panels.
Panel must be BMS/FAS Compatible.
Approval shall be taken for each panel before fabrication.
Galvanized hardwares with zinc passivation shall be used in
fabrication of panels.
General Notes:
1.0 MCCB:
MCCBs shall be used with Thermal Magnetic Based releases
upto 250A and microprocessor based Over Load, Short Circuit
/ Earth Fault release.
2.0 Breaking capacity mentioned is Ics value.
3.0 This BOQ to be read in conjunction with technical
specifications and Single Line Diagram (attached for
reference). If any discrepancy occurs that should be brought to
the notice of Client/Consultant before quoting the price
otherwise stringent condition will be deemed to have been
considered.
4.0 All MCCBs shall be provided with rotary operating handle and
ON/OFF lamps.
5.0 All meters shall be digital type (unless otherwise specified)
with RS 485 Port.
6.0 All Incoming and outgoing breaker must have provision of
Potential free contacts for BMS/FAS.
7.0 All MCBs shall be motor duty type.
8.0 All current/voltage transformer shall be cast resin type.
9.0 All indicating lamps shall be LED type.
BOQ OF ELECTRICAL WORK FOR PROPOSED REGIONAL OFFICE AT AJMER
123
BOQ OF ELECTRICAL WORK
REGIONAL OFFICE, BOB, AJMER
Price Bid for interior furnishing, electrical and HVAC work
ARPITA JAIN AND ASSOCIATESARCHITECT AND INTERIOR DESIGNER
S.No. Description Unit Qty. Rate to
be quotedAmount (Rs.)
10.0 Current density for Al. bus bars shall not be more than
0.8A/Sqmm. Rating of Bus bar is after considering all derating
factors. (Bus bar sizing calculation to be submitted for
approval.)
11.0 All internal control wiring shall be heat resistant type.
12.0 All TP feeders shall be provided with Isolable neutral link.
13.0 Bus bar chamber & cable entry both shall be provided at top
only.
14.0 All feeders shall be provided with door interlocked with door
defeat, pad lock facility.
15.0 Live parts shall not be accessible after opening the door,
Transparent acrylic sheet to be provided to cover the same.
16.0 Spare contacts of MCCBs / Relay / Contactor shall be wired
upto terminal block.
17.0 20% spare control terminal to be provided.
18.0 All incoming/outgoing cables shall be terminated on
links/terminals.
1.0 MV PANEL
(Loc. :- Panel Room )
I. INCOMING
a) 1 No-200 amp,25KA,3P MCCB
b) Aluminmum Bus Bar 20x10
c) Change Over Switch-200A (Onload Type)
II. METERING & INDICATION SEB
a) CT for metering 200/5A Class-1, 15VA - 3 Nos.
b) Multifunction Meter-1 no.
c)
Phase indicator lamps cluster LED type (Red, Yellow/Blue)
with protection fuses with control MCB of 2A - 1 Set
d)Digital ammeter 250 Amps with ammeter selector switch and
connected through suitable current transformers 250/5.
e)Digital Voltmeter 500 Volts with voltmeter selector switch, 2
Amps HRC fuses with carriers.
III OUTGOING
a) 63 A TPN MCB (15KA) - 4 No.
b) 63A TPN MCB (10KA) -6 Nos.
c) 25A TPN MCB (10KA) -0 Nos Nos. 1
( A )
B) MV CABLES
1 Supplying, Laying, testing & commissioning of the following
sizes of XLPE Al. Conductor armoured cables of 1.1KV grade
conforming to IS 7098 on the surface of wall or on existing
cable trays with 2 Nos 10 swg GI ECC by GI bar and saddles
on wall/floorpass through class B GI pipe complete with
hangers, properclamps fixing hardware etc. as required
a) 3.5 C x 150 Sq. mm Al. Cable Mtrs 70
TOTAL CARRIED OVER TO SUMMARY
124
BOQ OF ELECTRICAL WORK
REGIONAL OFFICE, BOB, AJMER
Price Bid for interior furnishing, electrical and HVAC work
ARPITA JAIN AND ASSOCIATESARCHITECT AND INTERIOR DESIGNER
S.No. Description Unit Qty. Rate to
be quotedAmount (Rs.)
b) 4 C x70 Sq. mm Al. Cable Mtrs 60
c) 4 C x 25 Sq. mm Al. Cable Mtrs 40
d) 4 C x 10 Sq. mm Al. Cable Mtrs 40
e) 4 x 16 sqmm Copper Wire with 50 mm conduit Mtrs 40
f) 2 x 16 sqmm Copper Wire with 32 mm conduit Mtrs 30
2 Suppling, making, testing & commissioning of end termination
with brass mettalic double compression glands suitable for the
following sizes of XLPE Al. conductor arnoured cables
including proper sizes of copper thimbles etc. as required.
a) 3.5 C x 150 Sq. mm Al. Cable Nos. 2
b) 4 C x 70 Sq. mm Al. Cable Nos. 4
c) 4 C x 25 Sq. mm Al. Cable Nos. 2
d) 4 C x 10 Sq. mm Al. Cable Nos. 2
e) 4 x 16 sqmm Copper Wire Nos. 4
3 Supply and installation of following sizes of perforated GI
cable tray made cut of 2 mm thick GI sheet, suspended from
the ceiling or fixed on wall/column etc complete with
suspenders, runners and fixing hard ware etc. as required.
a) 50 mm x 300mm x 50 mm Mtrs 10
b) 50 mm x 150 mm x 50 mm Mtrs 30
4 Supply and fixing of following sizes of Raceway fabricated out
of 2mm thick G.I. Sheet in floor or in vertical low voltage
shaft including fixing hardware, making recess in floor and
repair after fixing the raceway complete as required. (For Low
Voltage Systems)
(a) 50 mm x 35mm Mtrs 5
(b) 100mm x 35mm Mtrs 5
5 Supply and fixing following sizes of floor boxes fabricated out
of 2 mm thick G.I. Sheet with cover plate in floor.
(a) 75 mm x 75 mm x 75 mm Nos. 8
(b) 110 mm x 75 mm x 75 mm Nos. 4
( B )
C) SAFETY EQUIPMENTS
1 Supplying & fixing or Rubber matting of 12 mm thick, 1 Mtrs
wide suitable for voltage of 1.1 KV etc. as required.
Sq.Mtrs 4
2 Supplying & fixing of Shock treatment chart printed in atle;ast
three languages i.e, Hindi, English and a local language fitted
in wooden frame and glass at front side and hard board at back
side etc. as required.
Nos. 1
3 Providing & fixing of MV / HV Danger Notice Plate of 200
mm x 150 mm ,made of mild steel at least 2mm thick and
vitreous enameled, white on both side & with inscription in
signal red colour on front side as required.
Nos. 1
( C )
D) DISTRIBUTION BOARDS
TOTAL CARRIED OVER TO SUMMARY
TOTAL CARRIED OVER TO SUMMARY
125
BOQ OF ELECTRICAL WORK
REGIONAL OFFICE, BOB, AJMER
Price Bid for interior furnishing, electrical and HVAC work
ARPITA JAIN AND ASSOCIATESARCHITECT AND INTERIOR DESIGNER
S.No. Description Unit Qty. Rate to
be quotedAmount (Rs.)
Supplying, installation, testing & commissioning of following
type wall mounted Horizontal TPN/SPN distribution board of
double door type design made out of 16 gauge MS sheet with
supplying and fixing following accessories including painting,
interconnections, painting, earthing and labeling etc. as
required.
1 6 WAY TPN DB (PDB)
Incoming
a) 63Amp TPN MCB (10KA) - 1 No
Outgoing
a) 10/16/20/25 Amp SP MCB (10KA) - 12 Nos Set 2
Neutral links - 3 Nos (Separate for each phase)
2 6 WAY TPN DB (LDB)
Incoming
a) 40Amp TPN MCB (10KA) - 1 No
Outgoing
a) 10/16/20/25 Amp SP MCB (10KA) - 18 Nos Set 2
Neutral links - 3 Nos (Separate for each phase)
3 8 WAY TPN DB (UPS)
Incoming
a) 63Amp TPN MCB (10KA) - 1 No
Outgoing
a) 10/16/20/25 Amp SP MCB (10KA) - 20 Nos
b) Neutral links - 3 Nos Set 2
(Separate for each phase)
4 63 Amp. 4 P ,25ka MCB with Box for UPS INPUT Set 2
( D )
E) POINT WIRING
1.0 Providing & fixing POINT WIRING for Ceiling and wall
lights. The item includes Circuit wiring from DB to the switch
board with 2x2.5 Sq. MM PVC insulated copper conductor
with 1.5 sq. MM PVC insulated copper conductor for earthing
in appropriate size of PVC conduits ISI mark (IS :9537), point
wiring to be laid with (2x1.5+1X1.0) Sq. MM PVC insulated
copper conductor with all necessary accessories, such as
saddles etc. on surface or embedded in wall, chasing the walls
and making the surface neat afterwards The item includes
switch 6 AMP MK/ CRAB TREE/ ABB with (Double
module)all base plates & cover plates, M.S. box of same make
etc.3-plate ceiling rose to be provided for Exhaust fans
complete. (EACH Circuit to take NOT MORE than 5-6 points)
TOTAL CARRIED OVER TO SUMMARY
126
BOQ OF ELECTRICAL WORK
REGIONAL OFFICE, BOB, AJMER
Price Bid for interior furnishing, electrical and HVAC work
ARPITA JAIN AND ASSOCIATESARCHITECT AND INTERIOR DESIGNER
S.No. Description Unit Qty. Rate to
be quotedAmount (Rs.)
(i) Primary Point :-
Providing and fixing point wiring with same specifications as
MAIN point wiring above but One point controlled by one
switch.
Points 100
(ii) Secondary Point:-
Providing and fixing point wiring with same specifications as
MAIN point wiring above but 2 points to be controlled by one
switch.
Points 60
(iii) Providing and fixing point wiring with same specifications as
MAIN point wiring above but 3 points to be controlled by one
switch.
Points 30
(iv) Providing and fixing point wiring with same specification as
above but for WALL FAN/EXHUAST FAN points with
1x5pin 6Amp socket outlet to be provided at the location of
Wall fan
Points 48
(v) Providing & laying 6 Amp light plug point. With 2x2.5 Sq.
MM PVC covered copper conductor with 1x 1.5 Sq. MM PVC
covered copper conductor for Earthing. The item Includes 1
NO 5 pin 6 AMP socket and 1 no 6 AMPs switch etc.
complete.
Points 40
(vi) Providing & laying 6 Amp LOOPED plug point. incl. socket
and switch (double module) etc. complete. with specifications
same as above.
Points 10
(vii) Providing and fixing BELL POINTS on wall / partition with
2x1.0 Sq. MM copper conductor in MS medium guage conduit
(IS:9537) with call bell switch (Puch Type) including
ANCHOR call bell TRESSA Multi Tune Bell etc. complete.
Points 3
2.0 Wiring for MCB controlled Light Point with 3 x 1.5 Sq. mm
PVC insulated FRLS multistrand copper conductor 1100 Volt
grade wires in PVC surface/recessed conduit with accessories
including cost of providing saddles etc for surface conduiting
and/or cost of cutting and filling chases for recessed
conduiting (For Glow Sign Board)
(i) Primary Point Points 2
(ii) Secondary Point Points 4
3.0 Providing and fixing COMPUTER POINTS with 2x2.5 Sq.
MM PVC copper conductor & 1x1.5 sq. mm. PVC insulated
copper conductor for earthing including 3 Nos 5pin 6 Amp
sockets, 1 Nos 16 amp switch & one 5 Amp indicator,
complete with all necessary accessories. (all 3 sockets, switch
and indicator to be considered as ONE POINT) For points on
counter the switch/socket and indicator to be located below
the counter Maximum 4 points per circuit, Looped point to be
paid saperately (each circuit to be controlled by one MCB).
Points 55
127
BOQ OF ELECTRICAL WORK
REGIONAL OFFICE, BOB, AJMER
Price Bid for interior furnishing, electrical and HVAC work
ARPITA JAIN AND ASSOCIATESARCHITECT AND INTERIOR DESIGNER
S.No. Description Unit Qty. Rate to
be quotedAmount (Rs.)
3(b) Providing and fixing COMPUTER POINTS with same
specifications as above BUT points to be LOOPED with main
point .
Points 20
4.0 Wiring for POWER PLUG POINT with 6 pin 6/16 A socket
controlled by 1 No. 16A Switch with (2 x 4.0+1X2.5) Sq. mm
PVC insulated FRLS multi strand copper conductor 1100 Volt
grade wires in recessed/surface PVC conduit with accessories
including cost of providing saddles etc for surface conduiting
and/or cost of cutting chases for recessed conduiting, including
the cost of providing & fixing 1 No. Modular type 6 pin 16 A
socket outlet controlled by 1 No. 16 A switch with cover plate
GI/ MS box, complete as per specification and as required.
(One Point per circuit)
Points 30
5.0 Wiring for 20A Single Phase metal clad socket outlet with 2 x
4 +1 x 2.5 sqmm PVC insulated FRLS multistrand copper
wire of 1100 volt grade in surface / recessed PVC conduit
pipe with accessories including supply and fixing 20A 3pin
metal clad plug and socket and 20A SP MCB (MD) in IP 44
Poly carbonate box complete as per specification and as
required.
Points 3
6.0 Wiring for 32A Single Phase metal clad socket outlet with 3 x
6 sqmm PVC insulated FRLS multistrand copper wire of 1100
volt grade in surface / recessed PVC conduit pipe with
accessories including supply and fixing 32A 3pin Metal clad
plug & socket and 32A SP MCB (MD) in IP 44 Poly carbonate
box complete as per specification and as required.
Points 3
10.0 Providing and fixing of following sizes of PVC Flexible
Conduits suitable for various applications, halogen free, oil
and petrol resistant, flame retardant, self extiguishing, high
compressive strength and good wearing properties along with
connectors complete with conduit gland & all accessories
required.
a) 25mm dia RM 100
11.0 Providing & fixing BELL POINTS on wall / partition with
3x1.5 Sq. MM copper conductor in PVC medium gauge
conduit with call bell switch (Push Type) including bell Multi
Tune Bell etc. complete.
Nos 2
( E )
F) TELEPHONE SYSTEM
1.0 Supply & fixing the following sizes of PVC conduit in
recessed or on surface of wall . False ceiling including cutting
the wall and making good the same as required.
a) 25 mm dia Mtrs 250
2.0 Supply and fixing of RJ11 moduler Telephone outlet in d M.S.
Box and Modular Plate including cost of M.S.box, modular
plate and connections etc as required.
Nos. 40
TOTAL CARRIED OVER TO SUMMARY
128
BOQ OF ELECTRICAL WORK
REGIONAL OFFICE, BOB, AJMER
Price Bid for interior furnishing, electrical and HVAC work
ARPITA JAIN AND ASSOCIATESARCHITECT AND INTERIOR DESIGNER
S.No. Description Unit Qty. Rate to
be quotedAmount (Rs.)
3.0 Supply & fixing the following sizes of 16 SWG Krone
telephone tag blocks housed in suitable sizes of powder coated
MS boxes with hinge cover complete as required.
b) 20 pair telephone tag block Nos. 1
4.0 Supplying & laying the following sizes of PVC insulated and
overall sheathed taped telephone cables of 0.51mm dia size
inPVC conduit recessed in wall or on surface of wall including
cutting the chases in making good the same and connection
etc. complete as required. (From TTB on Ground Floor to
Upper Floor)
a) 3 pair telephone wire Mts 360
c) 20 Pair telephone cable Mtrs. 75
5.0 Supply & fixing of EPABX system model Compact series 824
(8 P&T & 24 Extensions) make :- Star
Nos. 1
6.0 MDF (50Pair) (Krone) Nos. 1
( F )
G) TV SYSTEM
1.0 Wiring for TV point with RG-6 TV coaxial cable in
ExistingPVC conduit including supply of all metarials
complete as required.
Mtrs 75
2.0 Supply & fixing the following sizes of PVC conduit in
recessed or on surface of wall . False ceiling including cutting
the wall and making good the same as required.
a) 25 mm dia Mtrs 75
3.0 Supply & laying of RG-11 TV co-axial cable for cable TV
system in 25 mm dia PVC conduit pipe in recess or on surface
of wall including cutting the chases as making good the
damage etc as required. (For Vertical & Horizontal runs)
Mtrs 50
4.0 Supply & fixing of co-axial type TV socket in zinc chromate
passivated M.S. Box & Moduler plate including making
connections etc. complete as required.
Nos. 2
5.0 Supply & fixing the following type of splitter box / Tape Off
box in recess in wall or ceiling or on surface etc as required.
b) 4 way splitter / Tape Off box Nos. 1
c) 6 way splitter / Tape Off box Nos. 1
( G )
Note :- Only conduiting & cabling has been included in the
BOQ for TV System. The High end equipment and signal
booster amplifier etc. shall be provided by specialised agency.
H) COMPUTER DATA NETWORKING
1.0 Supply & fixing the following size of PVC conduit in
Floor/Surface of wall, including cutting the Floor/Wall and
make the good the same as required (For Switcher to Data
point.)
a) 25 mm dia Mtrs 600
TOTAL CARRIED OVER TO SUMMARY
TOTAL CARRIED OVER TO SUMMARY
129
BOQ OF ELECTRICAL WORK
REGIONAL OFFICE, BOB, AJMER
Price Bid for interior furnishing, electrical and HVAC work
ARPITA JAIN AND ASSOCIATESARCHITECT AND INTERIOR DESIGNER
S.No. Description Unit Qty. Rate to
be quotedAmount (Rs.)
2.0 Supply and fixing square face plate MS housing box with RJ-
45 socket etc complete.Each point to be marked with ferrules.
dully recessed in wall/partition
Nos. 60
3.0 Supply and drawing of CAT- 6 UTP cable from system room
to individual points to be fixed on walls/partitions/wooden
tables in 25 mm PVC conduit with suitable clamp and
saddles and other accessories required making connection on
both the ends.
Mtrs 1400
4.0 Providing and fixing patch cords
1m length Nos 30
7.0 2m length Nos. 30
( H )
I)
1.0 Supply & installation , testing & commissioning of 48/36/24"
ceiling Fan complete with all accessories such as blades,
canopy etc. including wiring the down rod with 3 x 1.5 sq mm
FRLS PVC insulated multistranded copper conductor wires
and earthing the fans etc. complete as required.
Nos. 2
2.0 Supply & installation , testing & commissioning of wall
Mounted Fan 400mm Sweep. complete with all accessories
such as blades, canopy etc.Connection with 3 x 1.5 sq mm
FRLS PVC insulated multistranded copper conductor wires
from the socket outlet to the fan earthing etc. . complete as
required.(Wall Mounted Fans Bracket fans sweep 400 mm)
Nos. 40
3.0 Supply & installation, testing & commissioning of 12/9"
exhaust fans on existing opening in wall including all fixing
hardware, louvers, shutters etc. Connection with 3 x 1.5
Sqmm FRLS PVC insulated multistranded copper conductor
wire from the socket outlet to the fan earthing etc. complete as
required.
Nos. 6
4.0 Supply & installation of self illuminated Exit / Fire Exit Signs
boards (Glolite/Prolite make) hung from ceiling or on wall as
per site conditions complete with all accessories etc. as
required
a) Two Sided 11" x 4" Nos. 2
b) One Sided 11" x 4" Nos. 2
5 Supply, storing, unpacking, assembling, Installation, testing, &
commissioning of All type of Recessed / Surface mounted
Lighting Fixtures (as approved by client/architect) including
all fixing hardwares complete as required S/F of 600 x 600
LED recessed mounted ( LED 34 Watt 6000K in false ceiling
(code No. LHEEBP7CUL1W034, Havells LED Light.) ,
(philips RC380B G2 LED28S-6500 PSU OD WH) 29 Watt or
equivalent )
Nos. 70
SUPPLY & INSTALLATION OF LIGHTING AND FANS FIXTURES
TOTAL CARRIED OVER TO SUMMARY
130
BOQ OF ELECTRICAL WORK
REGIONAL OFFICE, BOB, AJMER
Price Bid for interior furnishing, electrical and HVAC work
ARPITA JAIN AND ASSOCIATESARCHITECT AND INTERIOR DESIGNER
S.No. Description Unit Qty. Rate to
be quotedAmount (Rs.)
6 Supply, storing, unpacking, assembling, Installation, testing, &
commissioning of All type of Recessed / Surface mounted
Lighting Fixtures (as approved by client/architect) including
all fixing hardwares complete as required ( LED Down
Lighter 18 Watt (Model no Havells Octane Square LED panel
LHEBHEPZ1W018 or equv. as per list)
Nos. 40
7 Supply, storing, unpacking, assembling, Installation, testing, &
commissioning of All type of Recessed / Surface mounted
Lighting Fixtures (as approved by client/architect) including
all fixing hardwares complete as required ( LED Down
Lighter 12 Watt (Model no Havells Octane Square LED panel
EDGEPROSODLR12WLED857S or equv. as per list)
Nos. 40
8 Supply, storing, unpacking, assembling, Installation, testing, &
commissioning of All type of Recessed / Surface mounted
Lighting Fixtures (as approved by client/architect) including
all fixing hardwares complete as required ( LED tubeLight 18
watt BN209CLED40/L1200, PHILIPS , Havells Photon Ultra
18 W LED Tube Lumens 2100 White
Nos. 20
9 Supply, storing, unpacking, assembling, Installation, testing, &
commissioning of All type of Recessed / Surface mounted
Lighting Fixtures (as approved by client/architect) including
all fixing hardwares complete as required (LED hanging Light
in false ceiling ( Havells 36 watt 5700K
SABERLP36WLED840SPMMAWH or equv.
Nos. 2
10 Supply, storing, unpacking, assembling, Installation, testing, &
commissioning of LED STRIP Light (as approved by
client/architect) including all fixing hardwares complete as
required (LED strip In Cove light with Driver)
Rmt 200
11 P& F Bracket spot Light on wall -8 to 15 W Nos. 6
( I )
J) EARTHING
TOTAL CARRIED OVER TO SUMMARY
131
BOQ OF ELECTRICAL WORK
REGIONAL OFFICE, BOB, AJMER
Price Bid for interior furnishing, electrical and HVAC work
ARPITA JAIN AND ASSOCIATESARCHITECT AND INTERIOR DESIGNER
S.No. Description Unit Qty. Rate to
be quotedAmount (Rs.)
1.0 Supply, installation, testing and commissioning of 3000 mm
long 25 mm dia minimum 11.6 kg in weight high tensile
strength solid steel rods molecularly bonded with 250 microns
copper coating complies to IS 3043 and tested as per IEC
62561-2, High resistance to corrosion and high tensile strength
earthing kit with connector and sufficent weight earth
conductivity enhancing mineral compound tested as per IEC
62561-7 complete in all manners with all require accessories
etc. for lowering the effective ground impedence value to less
than one ohm and ensuring that it should be less than one ohm
by adding more earthing pits as a combined sets.The earthing
inhancement compound shall boost moisture to retain the
moisture duly tested & certified by CPRI & CETL
Laboratory.Incase more earthing pits are added then
interconnecting these pits shall be included in this item ( For
UPS & server)
Sets 2
2.0 Supply, installation, testing and commissioning of 3000 mm
long 14.2 mm dia 100 Micron Copper bonded low carbon steel
electrode complies to IS 3043 and tested as per IEC 62561-2,
High resistance to corrosion and high tensile strength earthing
kit with connector and 7 Kg earth conductivity enhancing
mineral compound tested as per IEC 62561-7 complete in all
manners with all require accessories etc. for lowering the
effective ground impedence value to less than one ohm and
ensuring that it should be less than one ohm by adding more
earthing pits as a combined sets.The earthing inhancement
compound shall boost moisture to retain the moisture duly
tested & certified by CPRI & CETL Laboratory.Incase more
earthing pits are added then interconnecting these pits shall be
included in this item ( Panel Body)
Sets 2
3.0 Supply and fixing of 25 mm x 3 mm thick copper strip in earth
electrode including connection etc. as required
Mtrs 25
4.0 Supply and fixing of 25mm x 6mm thick G.I. strip earth
electrode including connection etc as required.
Mtrs 30
5.0 1 x 16sqmm copper wire for UPS/Server Mtrs 40
6.0 Supplying and laying of 8 SWG G.I. Wire on surface / recess
as required.
Mtrs 50
( J )
K) ELECTRICAL WORK FOR AC PANEL
TOTAL CARRIED OVER TO SUMMARY
132
BOQ OF ELECTRICAL WORK
REGIONAL OFFICE, BOB, AJMER
Price Bid for interior furnishing, electrical and HVAC work
ARPITA JAIN AND ASSOCIATESARCHITECT AND INTERIOR DESIGNER
S.No. Description Unit Qty. Rate to
be quotedAmount (Rs.)
1.0 Design, fabrication, supply, installation, testing &
commissioning of LT Panel/Sub-distribution panels fabricated
out of 2mm thick for structural members and 1.6mm thick for
door and covers CRCA sheet in cubicle compartmentalize free
standing floor/wall mounted, dust and vermin proof. Cable
gland plates shall be provided on top as well as at the bottom
of the panels. Panels shall be treated with all anticorrosive
process before painting as per specifications with 2 coats of
zinc chromate primer and final approved shade of enamelled
paint. 2 nos.. earthing terminals shall be provided for all
distribution panels. Panels shall be suitable for 415V, 3-phase,
4-wire, 50Hz supply system and with 15% spare space, lifting
hooks shall also be provided in case of large panels. Degree of
ingress protection of IP-55.
1.1 AC PANELIncoming
1 nos. 100 amp TPN MCCB with microprocessor based over
current short circuit and earth fault release complete as
requiredCast resin current transformers of 250/5 ratio Class 1.0 for
metering
1 no digital electronic ammeter 250amps with s/s
1 no digital electronic voltmeter 500 volts with s/s
1 set of three RYB phase indicating lamps (LED type)
BUSBARElectrolytic high conductivity aluminium three phase and
neutral bus bars rated at 320 amps having a maximum current
density of 1 amp per sq mm suitable to with stand symmetrical
fault level of 35 K.A. at 415 volts. The neutral bus
bar is to be of 50% capacity.
Outgoing:
4 nos.. 63 Amp 15 KA TPN MCB (for VRV Units)
1 nos. 32 amp 10 kA TPN MCB with thermal magnetic release
complete as required (spare)
Switchboard shall be complete with all interconnections,
risers, internal wiring, labels etc complete as required
Set 1
2.0 Supplying & drawing following sizes of FRLS PVC insulated
copper conductor, three core cable in the surface/ recessed
steel / existing PVC /MS conduit as required.
3x2.5 sqmm Mts 60
3.0 Supply, installation, testing and commissioning of control cum
transmission wiring of 2 x 1.5 sqmm copper wire in existing
MS/PVC conduits between indoor and outdoor etc complete as
required.
Mts 100
133
BOQ OF ELECTRICAL WORK
REGIONAL OFFICE, BOB, AJMER
Price Bid for interior furnishing, electrical and HVAC work
ARPITA JAIN AND ASSOCIATESARCHITECT AND INTERIOR DESIGNER
S.No. Description Unit Qty. Rate to
be quotedAmount (Rs.)
4.0 Supply laying and fixing copper conductor XLPE insulated
armoured FRLS PVC Sheathed Cable of 1.1 kv grade
conforming to IS7098(P-I) with cable tray /on surface /recess
in between main supply & outdoor unit etc.as required.
a 4x 25 sqmm Mts 40
b 4x 16 sqmm Mts 30
c 4x 10 sqmm Mts 20
d 4x 6 sqmm Mts 20
5.0 Supplying & fixing 100 amp four pole 415 volt isolator along
with suitable ELCB in a weather proof hot pressed moulded
SMC Distribution BOX having side hinged door with
mechanical fastener complete as required. (For ODU unit.)
Nos 3
6.0 Providing & fixing 6 SWG dia GI Wire on surface or in recess
for loop earthing along with existing surface /recessed conduit
cable etc as required
Mts 60
7.0 Supplying and fixing of following sizes of 2 mm thick PVC/GI
conduit along with accessories in surface/recess including
cutting the wall and making good the same in case of recessed
conduit as required
Mts 30
a 25 mm Dia
8.0 CABLE TRAY
Supplying and installing following size of perforated
prepainted M.S. cable trays with perforation not more than
17.5%, in convenient sections, joined with connectors,
suspended from the ceiling with M.S. suspenders including
bolts & nuts, painting suspenders etc as required.
a 100 mm width x 50 mm depth x 1.6 mm thickness. Mts 15
b 150 mm width x 50 mm depth x 1.6 mm thickness. Mts 10
K)
Date:- (Signature of the Bidder with Seal)
Place:-
TOTAL CARRIED OVER TO SUMMARY
G.TOTAL (A+B+C+D+E+F+G+H+J+K)
134
BOQ OF HVAC WORKREGIONAL OFFICE, BOB, AJMER
Price Bid for interior furnishing, electrical and HVAC work
ARPITA JAIN AND ASSOCIATESARCHITECT AND INTERIOR DESIGNER
S.No Particulars QTY Unit Rate to
be quoted
Amount
(Rs.)
1 OUTDOOR UNIT (VRF)Supply, Installation, Testing, Commissioning of Outdoor
condensing unit comprising of scroll type inverter compressor's
, Heat Exchanger, propeller / axial fans, refrigerant Circuit,
Safety Devices & Oil Recovery System and in built starter. The
starter unit shall be operated both from local and remote
Necessary Refrigerant Gas and oil charge. Compressor shall be
equipped with inverter controller to be efficient & quiet. The
outdoor unit shall have the multi-step of capacity control to
meet load fluctuation and indoor unit individual control. Heat
Exchanger shall be constructed with copper tubes mechanically
bonded to aluminium fins to form a cross fin coil. Outdoor
Units to be placed on MS Stand. Automatic Phase sequencer
device should be included in ODU cost. Refrigerant shuold be
R410AShould be able to work upto 50 Deg. C (Data supported by
Catalog)
(HEAT - PUMP MODEL)
a 58 HP - ( 20 HP + 10 HP + 10 HP + 18 HP ) 1 Nos.
EER on ARI Condition @ 100% Load in Cooling Operation
should be 4.0 or More
Manufacturers should provide combination ODU to achive
Higher EER, if Required; i.e. (20 HP = 10 HP + 10 HP) & 18
HP = 10 HP +8 HP)
EER Data Must be supported with Catalog / Engineering Data
Book2 INDOOR UNIT
Supply, Installation,Testing & Commissioning of following
capacity modulating type 4 way cassette VRV system Indoor
unit along with IR Receiver, necessary supports, nuts & bolts
etc complete.
4-Way Casette Type Units :
a Cassette Type : 1.3 TR Compact 2 x2 2 Nos.
b Cassette Type : 2.0 TR 1 Nos.
c Cassette Type : 2.6 TR 9 Nos.
d Cassette Type : 3.2 TR 4 Nos.
e Cassette Type : 4.0 TR 2 Nos.
3 CENTRAL REMOTE CONTROLLER :
a Central Remote Control (1 No. for each Floor)Should have following Function / Features :
Touch Panel Type
Temperature Limit Restriction of each Unit
On / OFF each Indoor Unit
Temperature UP / DOWN each unit
Scheduling
Individual Remote Permit / Prohibit Fuction
b Cordless Remotes 18 Nos.
4 Branch Joint / Y-Joint / Separation Tubes
a Supply, Installation, Testing & Commissioning of Y-joints
.18 Nos.
BOQ OF HVAC WORK FOR PROPOSED REGIONAL OFFICE AT AJMER
1 Nos.
135
BOQ OF HVAC WORKREGIONAL OFFICE, BOB, AJMER
Price Bid for interior furnishing, electrical and HVAC work
ARPITA JAIN AND ASSOCIATESARCHITECT AND INTERIOR DESIGNER
S.No Particulars QTY Unit Rate to
be quoted
Amount
(Rs.)
5 COPPER PIPE
5.1 Supply, installation, testing & commissioning refrigerant
liquid line and suction line (duly insulated )piping with
nitrile foam insulation of 13mm up to 25mm & 19mm for above a 06.35 mm 75 Rmt.
b 09.52 mm 75 Rmt.
c 12.70 mm 75 Rmt.
d 15.88 mm 75 Rmt.
e 19.05 mm 60 Rmt.
f 22.22 mm 60 Rmt.
g 28.58 mm 60 Rmt.
h 34.92 mm 0 Rmt.
i 41.30 mm 0 Rmt.
6 TRANSMISSION CABLE
6.1 Supply, installation, testing & commissioning of transmission
cabling between indoor &
outdoor in PVC Conduita 2 C * 1.5 sq.mm Cable 450 Rmt.
7 POWER CABLE
7.1 Supply of Electrical Power cable between the indoor unit and
power socket with unshielded copper cable, with 1 no. plug top
for each IDU.
a 3 Core, 2.5 sqmm Cable 60 Rmt.
b 4 Core, 16 sq mm cable 60 Rmt.
8 DRAIN PIPING
8.1 Supply, installation, testing & Commissioning of following
sizes insulated PVC drain pipes.
a 25mm 100 Rmt.
b 32mm 100 Rmt.
c 40mm 50 Rmt.
9 CABLE TRAY
9.1 Supply & Installation of Covered M.S. Slotted Tray for expose
copper piping
a 300mm W x 50mm H X 2mm (With Cover) 125 Rmt
10 ISOLATOR SWITCH FOR VRV OUTDOOR UNIT
a Supply, Installation, Testing & Commissioning of isolator
switch for outdoor Unit with sheet metal enclosure, rain
protection etc. as required to suit the site condition.
4 Nos.
11 Removing, shifting, loading/unloading of existing split AC
units (2.0/1.5 Tr) from existing RO office to new premises
including reinstallation work of AC units ( Indoor as well as out
door) at specified locations as per drawing with provision of gas
charging as per specifications with commission and testing of
AC units to the satisfaction of Bank
4 Nos.
Date:- (Signature of the Bidder with Seal)
Place:-
TOTAL OF HVAC WORKS
136