technical application guide for up shine led downlight...cutout size of led downlight. 2. use...
TRANSCRIPT
Technical ApplicationGuide for UP-SHINELED DownlightUP-DL97-4-15W
Introduction
www.upshine.com [email protected]
Up-shine SMD LED Down light adopts high lumen SMD LED, PC diffuser with even light output. White, silver, chrome surface treatment are available for customer’s preference. Triac dimmable, 0-10V dimmable and DALI dimmable version share great popularity by excellent dimming effect.
● Up to 70% energy saving compared to standard CFL● Long lifetime of 40,000 hours ● Dimmable when using triac dimmer● 90° wide beam angle●Ø120-130mm cutout● CCT: 3000K 4000K 5000K 5700K● No UV/IR light● Environment friendly, without Mercury or any other hazardous substances
Application notes● IP54 for indoor use●Professional electrician for installation only ● Switch off before installation● Do not touch when in use● Keep away from hot steam and corrosive gas
Application AreasIt is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc.
Certificate
Product Information
Technical Specifications
Model Voltage Power PowerFactor
Lumen(±5%)
Beamangle CCT Lifespan CRI Dimmable Dimension
UP-DL97-4-15W AC230V 15W ≥0.9 1450 90° 3000K 40000h ≥80 No Ø145*45mmcutout 120-130mm
UP-DL97-4-15W AC230V 15W ≥0.9 1500 90° 4000K 40000h ≥80 No Ø145*45mmcutout 120-130mm
UP-DL97-4-15W AC230V 15W ≥0.9 1530 90° 5000K 40000h ≥80 No Ø145*45mmcutout 120-130mm
UP-DL97-4-15W AC230V 15W ≥0.9 1560 90° 5700K 40000h ≥80 No Ø145*45mmcutout 120-130mm
UP-DL97-4-15W-D AC230V 15W ≥0.9 1420 90° 3000K 40000h ≥80 Yes Ø145*45mmcutout 120-130mm
UP-DL97-4-15W-D AC230V 15W ≥0.9 1470 90° 4000K 40000h ≥80 Yes Ø145*45mmcutout 120-130mm
UP-DL97-4-15W-D AC230V 15W ≥0.9 1500 90° 5000K 40000h ≥80 Yes Ø145*45mmcutout 120-130mm
UP-DL97-4-15W-D AC230V 15W ≥0.9 1530 90° 5700K 40000h ≥80 Yes Ø145*45mmcutout 120-130mm
www.upshine.com [email protected]
Driver data Sheet
Fixture CompatibilityRated
WattageElectrical
ClassificationIngress
Protection Operating
TempOperatingHumidity
Storage Temp
15W Ⅱ IP54 -20oC~45oC 0~90% -20oC~65oC
Driver data DIM Non dim
Input rated Voltage AC230V AC230V
Frequency 50Hz 50/60Hz
Input Voltage AC200-240V AC200-240V
Efficiency ≥83% ≥84%
Total load Wattage 15W±1W 15W±1W
Power Factor ≥0.9 ≥0.9
Rated input current ≤0.09A ≤0.1A
Full load output Voltage DC23-40V DC25-42V
Rated output current 350mA 350mA
Output current range 350mA±5% 350mA±5%
Power tolerance ±5% ±5%
Current output tolerance ±5% ±5%
Dimming range 8%-100% —
Dimmer Triac dimmers —
Short circuit protection PASS PASS
Over voltage protection PASS PASS
Over temperature protection PASS PASS
THD ≤18% ≤18%
Withstand voltage AC3750V AC3750V
45
Ø14
5
118
Photometric Diagram3000K
Polar intensity diagram Beam diagramCartesian intensity diagram
UNIT: cdAVERAGE BEAM ANGLE(50%): 93.6 DEG
-/+180
-120
-90
-30
120
90
30
0
130
260
390
520
650
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)6.50
5.85
5.20
4.55
3.90
3.25
2.60
1.95
1.30
0.65
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25Height Eavg, Emax Angle: 93.30deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 951.8 lm
5700K
Polar intensity diagram Cartesian intensity diagram Beam diagram
Height Eavg, Emax Angle: 93.81deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 1025 lm
UNIT: cdAVERAGE BEAM ANGLE(50%): 94.0 DEG
-/+180
-120
-90
-30
120
90
30
0
140
280
420
560
700
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)7.0
6.3
5.6
4.9
4.2
3.5
2.8
2.1
1.4
0.7
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25
4000K
Polar intensity diagram Beam diagramCartesian intensity diagram
UNIT: cdAVERAGE BEAM ANGLE(50%): 94.0 DEG
-/+180
-120
-90
-30
120
90
30
0
140
280
420
560
700
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)7.0
6.3
5.6
4.9
4.2
3.5
2.8
2.1
1.4
0.7
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25Height Eavg, Emax Angle: 93.50deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 970.5 lm
5000K
Polar intensity diagram Cartesian intensity diagram
UNIT: cdAVERAGE BEAM ANGLE(50%): 93.8 DEG
-/+180
-120
-90
-30
120
90
30
0
140
280
420
560
700
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)7.0
6.3
5.6
4.9
4.2
3.5
2.8
2.1
1.4
0.7
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25
Beam diagram
Height Eavg, Emax Angle: 93.42deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 1020 lm
Spectral Distribution
3000K
380 500 600 700 800Wavelength(nm)
Max=10657 [1.0=20000]
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0380 500 600 700 800
Wavelength(nm)
Max=9715 [1.0=20000]
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
380 500 600 700 800Wavelength(nm)
Max=7047 [1.0=20000]
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0380 500 600 700 800
Wavelength(nm)
Max=7526 [1.0=20000]Sp
ectr
um0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
4000K
5000K 5700K
www.upshine.com [email protected]
1.53 SDCM F5000K
x=0.3472 y=0.3632
2.00 SDCM F5700K
x=0.3292 y=0.3463
3.07 SDCM F3000K
x=0.4459 y=0.4056
3.69 SDCM F4000K
x=0.3865 y=0.3895
80
70
60
50
40
30
20
10
0
18:3
7:46
19:0
7:44
19:3
7:44
20:0
7:44
20:3
7:44
21:0
7:44
21:3
7:44
22:0
7:44
23:0
7:44
23:3
7:44
0:07
:44
0:37
:44
1:07
:44
1:37
:44
2:07
:44
2:37
:44
3:07
:44
3:37
:44
4:07
:44
4:37
:44
5:07
:44
5:37
:44
6:07
:44
6:37
:44
7:07
:44
7:37
:44
8:07
:44
8:37
:44
9:07
:44
IC
Capacitor
MOS
PCB
LED
Fitting
Environmental temperature
Tem
pera
ture
(o C)
Time
The driver lifespan is based on capacitor working temperature.
Driver lifetime & LED light decay rate
90000
80000
70000
60000
50000
40000
30000
20000
10000
065oC 75oC 85oC 95oC 105oC
Life
time
(hou
rs)
Capacitor Tc (oC)
Driver Lifetime
% L
umin
ous
Flux
FLUX
△ U'V'
110%
105%
100%
95%
90%
85%
80%
75%
70%
0.0040
0.0035
0.0030
0.0025
0.0020
0.0015
0.0010
0.0005
0.00000 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000
LifeTime (hours)
Polar Diagram Comparison
AVERAGE BEAM ANGLE (50%): 94.0DEG
140
280
420
560
700
0O
-/+180O
150O-150O
120O-120O
90O-90O
60O-60O
30O-30O
UNIT: cd
C0/180, 94.1 deg
C30/210, 94.0 deg
C60/240, 94.0 deg
C90/270, 94.0 deg
0
LED Light Decay Rate
Temperature● The testing is operated at 25°C
● The lifetime of capacitor, minimum of 5,000 hours if operated at 105°C, will be doubled whenever the temperature drops 10°C
● The highest withstand temperature of IC, MOS could be 120°C
● The highest withstand temperature of LED junction temperature is 150°C
www.upshine.com [email protected]
Packaging Information
SIZE(CM) N.W/pc(KGS) G.W.(KGS) Q'TY(PCS)
Carton 49*33*48 0.39 15.5 30
CTNS Q'TY(PCS) VOLUME(CBM)
20'' standardcontainer 356 10680 28
40'' standardcontainer 712 21360 56
www.upshine.com [email protected] Phone: +86 755 2919 7389Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China
Installation
Install requirements
A-gap above the fitting 25mm
B-gap to the building material 25mm
C-gap to the thermal insulation 25mm
1. Open a hole according to the cutout size of led downlight.
2. Use screw-driver to open the driver terminal cover, feed the main AC wire L. N. in terminal block respectively, then fix the cover back.
3. Connect the downlight with driver, hold back the spring clip then push the downlight into the hole.
4. Make sure the downlight fixed tightly in ceiling, turn on the power (Fig 1).
50mmPower supply
25mm25mm