the beva range of electric vehicles - home.btconnect.comhome.btconnect.com/barrettofboston/beva...
TRANSCRIPT
The BEVA Range of vehicles are environmentally clean, being electric
powered by 2 x 12 volt batteries designed for high power and long life. The co-axial geared motor unit incorporates a special braking system and transmits its power to the drive wheels through a custom
designed differential unit.
The control system of the ‘BEVA’ range of vehicles is transistorised and designed to satisfy UL standards. The hand controller incorporates an ignition light, key switch
as standard and an emergency stop button. Conforms to IP66, EN1175,
EN12895 & EC89/336/EEC.
‘BEVA’ vehicles are robust, with frames of all welded construction, designed to
operate a full shift with overnight charging. They have low maintenance
and operating costs.
BEVA THE ORIGINAL BEVA
Model Platform Size (mm)
Platform Height (mm)
Overall Size H x L x W (mm)
Wheel Size Dia (mm)
Wheel Type
BET05N 1495 x 760 465 1200 x 2000 x 795
2 x 406 x 100 2 x 250 x 15
Polyurethane Foam Filled Non Marking
BEVA CUB BET06N
1200 x 600 370 1130 x 1870 x 640
4 x 250 x 15 Polyurethane Foam Filled Non Marking
BC01Z Additional End Upright
BC02Z Super structure - Consisting of Half Hinged & Removable Sides
BC03Z Corner Buffer Wheels - Factory Fitted
BC04Z Lights - Factory Fitted
BC06Z Front Bumper Cut off power buffer - Factory Fitted
BC08Z Programmable Security Pad - Prevents unauthorised use.
BC09Z Weatherproof Canvas Cover With Roll Up Sides & Fixed Ends.
Operated by hand control unit which gives total control of speed and manoeuvrability both forward and reverse.
Regenerative braking system to ensure
complete safety at all times. Electromagnetic brake fitted motor /Gearbox.
The Platform is fitted with all round
buffering as standard. Vehicle is totally immobilised while
charging batteries. On-board Battery charger. BEVA CUB, a smaller version of the
BEVA is also available. Full Instruction and Training Included. Full Service Agreement Available. Free Consultation and site visit for
most UK customers included.
BEVA TUG
Model Overall Size H x L x W (mm)
Wheel Size Dia (mm) Wheel Type
BTT03F 660W x 1060L x 1030H
2 x 250 x 15 1 x 200 Swivel Castor
Polyurethane Foam Filled Non Marking and
Cushion
BTT03N 660W x 1060L x 1030H
2 x 250 x 15 1 x 200 Swivel Castor
Solid Non Marking
The BEVA TUG can be used to tow Danish trolleys or trailers using appropriate attachments that can be supplied. The unit is driven by two 12 volt batteries via a control system and drive unit incorporating an integral magnetic brake. Onboard charger unit inbuilt. Tows up to 480KG, approximately 4
laden Danish Trolleys. Suitable for towing over uneven ground
or broken concrete as well as up slopes. Free consultation and site visit for most
UK customers included.
Stand On BEVA
Model Overall Size H x L x W (mm)
Wheel Size Dia (mm) Wheel Type
BES02F 630W x 1300L x 1270H
4 x 250 x 15 Polyurethane Foam Filled Non Marking
BES02N 630W x 1300L x 1270H
4 x 250 x 15 Solid Non Marking
New Development Stand on BEVA Tug ideal for towing Danish trolleys.
Easy to use in small spaces. User Friendly. 3-4MPH Speed. 60cm Wide, only 4cm wider than a standard Danish trolley. Tows up to 480KG, approximately 4 laden
Danish Trolleys. CE marked electrical motor unit including 2
dead man triggers. 2 batteries charge on mains electricity
overnight. Easily runs at full power for an 8 hour
working day. Free consultation and site visit for most UK customers included.
W. S. Barrett & Son Ltd both design and manufacture all products in house in order to
create tailor made items such as the BEVA range, to be best suited for your intended use.
We currently supply BEVAs, as well as their corresponding truck and trailer attachments for a range of end uses including Hospitals,
Flower Nurseries and the Department of Health and Social Security.
Current customers use their BEVA fleets for carrying agricultural sprayers, moving heavy
hospital supplies, transporting RAF plane engines, towing Danish trolleys or to
increase personnel efficiency in warehouses and nurseries to name a few.
This easy steer trailer has been specifically designed for use with the BEVAs to easily
transport large loads.
Danish trolley towing attachments are
available, as well as connectors for towing
multiple Danish trolleys.
This BEVA has been adapted for use in
Newcastle Hospital for transporting supplies
around their large facilities.
The BEVAs are
incredibly versatile. This one belonging to a flower
nursery, has been mounted with a sprayer, to quickly
and easily treat a large number of plants
at once.
This one belonging to
Freeman Hospital, has been modified to a specific size
for their requirements.