the universal emergency luminaire - beghelli

The universal emergency luminaire

TITA

NI

UM BATTERY

W A R R A NTY

10YEAR

830144000 CATALOGO INFINITA LED GB.qxp_01 31/07/19 14:33 Pagina 1

10110YEARYYEYEAYEAR

© C

op

yrig

ht

03/2

019


Table of Contents

Introduction to INFINITA LED solutions 2

The CableCom System 4

INFINITA LED RTI 8

INFINITA LED X5 16

Cablecom Connect APPEasy to use and intuitive interface appto programm and register luminiare parameters 24

CABLECOM control units Stand-alone version 26

CONNECT version 27

1

CablecomCablecom

WIFI


2

Endless installation options,endless application options,

endless control and diagnostic options, endless battery life and useful life

34m installation centredistance 3m h

TITANIUM BATTERY =

RTI OpticsHigh bay light with light guide and high beam

control (Total Internal Reflection), suitable for bothwall and ceiling mounting


3

IP65 IK08UNPRECEDENTED

lightingPERFORMANCE

34minstallation

CENTRE DISTANCE

Luminous fluxes ofup to 1700 LUMENS

INFINITEbattery life

Suitable forHIGH-RISK locations

34m installation centredistance with 12m h

10 YEAR WARRANTYLONG-LIFETITANIUM BATTERYInfinita LED is equipped with LithiumTitanate batteries to ensure topperformance guaranteed for 10 years

AT and CT IN ONELUMINAIREULTIMATE AT-LG-DALI, LOGICA24,LOGICA230, CABLECOM andCABLECOM CONNECT, revolutionary interms of easy installation and flexible use

IT NEVER GOES OFFThe first luminaire with a nominal battery lifefrom 1 to 8h. With Infinity Mode, the batterylife becomes infinite

FLEXIBLE INSTALLATIONAccessories for any type of mounting:wall, ceiling, edge, suspended. 5 inlets for M20 cable glands, 5 inlets for 16and 20 mm wireways

X5 OpticsInterchangeable central lens that can create 5different controlled light beams for EmergencyExit Routes and Large Areas


4

BeghelliNew Centraltest system with intelligent diagnosis.Simple, reliable, revolutionary

Open Settings: using the App or with a simple screwdriverOpen Settings: using the App or with a simple Screwdriver No

constraints: Infinita LED can be installed in the CentralTest mode

in conjunction with the Cablecom control unit, which

exponentially increases the possibilities of parameter and test

management and control. When installing the luminaire without

the control unit, it shall be set to the Autotest mode that allows

adjusting its battery life from 1 to 3h using a circuit jumper or the

latest CableCom Connect APP that also provides additional

features. Turn your smartphone into an actual remote control and

set all the lamp parameters: Battery life from 1 to 8h, SE or SA

Operation, RestMode, launch battery life or functional Tests or

disable the emergency mode (Inibit).

The system uses the flash of any mobile phone to communicate

the data to be set to the luminaire. The APP is also designed to

detect the QR codes used to uniquely identify each luminaire.

This option allows keeping records of the luminaires installed, a

useful feature for the filling in of the System LogBook required by

standard EN UNI 11222. The same operations can be

centralised and organised in a simple and intuitive manner by

connecting the system to a CableCom or CableCom Connect

Control Unit.

Manual programming Programming via remote control

(Smartphone+App)

TitaniumAnodeBattery

10 year warranty with Titanium batteryThe new Titanium Beghelli battery differs from

standard rechargeable battery due to the

balance system and charge check system

(Battery Management System).

1 - Quick charge: The autonomy of luminaire

reaches 80% of nominal duration in less

than 3 hours of charging

2 - Extreme operating temperature: The titanium

battery can operate in extreme temperature from

-30°C up to +75°C. When installed into

luminaires, this battery grants a good performance

in ambient temperature from -20°C to +50°C.

3 - Long life thanks to built in battery

management system: 7.000 recharging

cycles, thanks to the electronic check of

balance and of phases of charge and discharge

with shortcircuit protection.

4 - Maximum reliabilty: The materials used in

these Titanium batteries do no react in the event

that a short circuit or other accidental event

occur.

10 YEAR WARRANTY


5

AUTOTEST CENTRALTEST

Luminaire Luminaire + App Luminaire + Control unit Luminaire + App+ Connect Control unit

Infinity Mode

Automaticperiodic test

Adjustable battery life 1h / 3h 1/1,5/2/3/8h 1/1,5/2/3/8h 1/1,5/2/3/8h

Functional TEST start

Battery life TEST start

TEST Synchronisation

TEST Scheduling

Rest Mode

Even/Odd Setting

Centralised errornotification

System data report

System log(Log Book)

CablecomCablecom

The simplicity of CABLECOM smart controlThe first BUS control system without BUS cables

Revolutionary control system able to communicate with the

luminaires by means of a BUS system that uses the emergency

electrical system for data transmission. The connection between

the CABLECOM Control unit and the luminaires is made by

switching the two power cables into communication BUSES in

such a way as to avoid any possibility of interference between the

transmission of data and the passage of current. The control unit

can be used to set all lamp parameters (Battery Life, Operation,

Functional and battery life test start) on all the luminaires at the same

time and receive malfunction warnings after the Emergency status

test.

In the Connect version of the Control unit, the App can be used to

obtain setting and error log reports on all the luminaires available in

the system. It can also be used to automatically create a LogBook

file to be attached to the safety documentation required by

Standard UNI 11222.

Performance flexibility for multiple functionsThe same luminaire can be integrated progressively with the App and the Control Unit

CablecomCablecom

AT/CT


L1L2L3N

CABLECOM

MainDistribution

Light Switch

ROOM 1

ROOM 2

L1L2L3N

CABLECOM Light Switch

6

The system diagram clearly shows the simplicity of the

Cablecom system. The power cord for normal lighting is the

same on which the control unit transmits data for the control of

the Infinita LED emergency luminaires.

The Control Unit can be used to run different types of

diagnostics, change the emergency luminaire settings and, for

Cablecom Connect Control Unit, also generate reports on all the

system data and automatic test Log Books, as required by

Standard UNI EN 11222.

BeghelliThe CentralTest with the best quality-price ratio ever


ROOM 1

L1L2L3N

CABLECOM

MainDistribution

Light Switch

Local Distribution

ROOM 2

Light Switch

Local Distribution

7

The Infinity Mode function can be activated on all Infinita LED

luminaires on both AT (via Beghelli Cablecom APP) and CT

versions, by enabling the mode from the control panel of the

Cablecom or Cablecom Connect Control Unit. Thanks to the

Cablecom communication BUS, which allows using the

power supply cables for data transmission, in the event of a

local blackout, the fault detected via the Infinity input

activates the emergency operation. Once the nominal

battery life ends, the Cablecom Bus will provide the

energy necessary to keep the luminaire on for an

unlimited amount of time (with reduced luminous flux

and provided that the Cablecom BUS line is powered).

InfinityModeThe Cablecom function that never leaves you in the dark


8


The Infinita LED RTI was namedafter its revolutionary optical

system: Total Internal Reflection.Light diffusion system that coversthe LED source to prevent glare

also allows increasing theinstallation centre distance of the

luminaires both in emergencysituations and along emergencyexit routes. The entire Infinita LED

line of luminaires has beendesigned to have no limitations on

use or installation. Limitlesselectrical connection and

positioning possibilities in differentarchitectural environments; the

control system can be upgradedfrom AutoTest to CentralTest usingthe Cablecom Control unit that isbased on simple manual or APP

programming.All Infinita LED products are

guaranteed for 10 years thanks tothe Lithium Titanate Battery

included in the standard supplypackage

The highest installation centredistance in its category

Infinita LEDRTIRugged

and versatile

9

TITA

NI

UM BATTERY

W A R R A NTY

10YEAR


1010

infinita leD rTi

GenerAl ChArACTerisTiCs

Power* 11, 24, 36W

Power supply*** 230Vac ± 10% 50/60Hz

Operation*** Non-maintained (SE),

Maintained (SA), Public Entertainment

(PS): only the Ultimate vers.

Conformity EN 60598-1, EN 60598-2-2,

EN 60598-2-22, UNI EN 1838,

UNI 11222, EN 62034

Degree of protection IP65, IK08

Battery life CableCom vers. 1h, 1,5h, 2h, 3h, 8h

Infinity mode

Ultimate vers. 1h, 1,5h, 3h

With Autoripara Battery: 2h, 3h, 6h

Overtime function

Charging time CableCom vers. L, GL: 24h - XL: 12h

Ultimate vers. 6h

12h (with Autoripara battery)

Ambient -20°C ÷ +50°C (Titanium Battery)

temperature***

Mounting wall, suspended ceiling, recessed,

false ceiling, wall edge, ceiling edge,

suspended, suspended with rods

Body Polycarbonate, white RAL 9003

Optics RTI= Total Internal Reflection

anti-glare

Screen Clear polycarbonate

Light source LED - 4000K

** Indicative power for comparison with fluorescent tube luminaires

*** Centralized systems are not included (LOGICA 230, LOGICA 24 AND HT)

for which the parameters refer to the connected central console

Optical RTI (Total Internal Reflection) anti-glare system and high-efficiency

LED battery. This innovative optical system provides not only very

uniform lighting but also optimal performance in both wall and ceiling-

mounted versions on emergency exit routes and in large areas, making

it possible to increase the centre distance between the luminaires. The

body is particularly rugged (IK08-IP65) and provided with several inlets

both on its sides and at the back to ensure quick and optimal wiring

under any installation conditions. The wide range of accessories makes

it possible to solve any issues related to emergency lighting and safety

signs. With the LTO (Lithium Titanate) battery you can obtain the

technical framework of an absolute luminaire that has no limitations on

use. Quality guaranteed for 10 years.

CABLECOM version

As standard, it is an AT luminaire with 1h battery life but the jumper can

be used to increase the battery life to 3h. The App or the CableCom

Connect control unit can be used to adjust all the parameters of the

lamp.

ULTIMATE version

Supplied in the centralised version (LG) configured automatically to

Autotest (AT) version unless connected to a control unit. The luminaire

can be transformed from LG into LGFM with the use of only one

accessory. The circuit also allows customising the luminaire according to

the requirements of use by adjusting its battery life (1h/1,5h/3h) and, on

SA versions, it is also possible to switch to PS version, adjusting the light

intensity as desired. The battery life can be doubled and the

luminous flux can be increased by adding the Autoripara Battery to

the standard battery.

L H

B

4681 SCREEN EDGE MOUNTING 250M4683 INFINITA LED RECESS BOX4687 PLASTERBOARD RECESSED MOUNTING BRACKET4686 EDGE MOUNTING FIXING BRACKET4685 INFINITA LED 45° BRACKET3912 PROTECTIVE GRILLE (440X215X99)4315 SUSPENDED MOUNTING RODS 250mm4316 SUSPENDED MOUNTING RODS 500mm4317 SUSPENDED MOUNTING RODS 1000mm3723 SUSPENDED MOUNTING HOOKS

Accessories to be ordered separately

Order Code Description

15037 LGFM MODULE15038 DALI MODULERA04 ADDITIONAL LTO 9.6V 1.2AH BATTERY

Ultimate Accessories to be ordered separately


20150 CABLECOM CONTROL UNIT20151 WIFI/BLE CONNECT CABLECOM CONTROL UNIT

CableCom Accessories to be ordered separately


- CABLE GLAND MEMBRANE M16 IP65- CABLE GLAND M20 WITH VENT- WIREWAY ADAPTER 16/20 WHITE4682 INFINITA LED STICKERS LH, RH, BTM, UP

(included only for SA version)

Accessories included


UVIP65 IK0810h

11/24/36 325 130 45 25

Power** • Dimensions (mm) • Distance of visibility (DV) W L B H screen

AT/CT

TITA

NIUM BATTERY

W

A R R A N TY

10YEAR


1111

The mechanics of the lamp body has been studied in collaboration

with a team of installers who have tested its versatility. Power supply

inlets provided on every side, suitable for any type of wireway (16-

20mm) or direct cable (M20 cable gland). The opening system has 4

snap hooks that allow access to the reflector and to the lamp circuit

for wiring and manual adjustments (when not using the Cablecom

Connect APP)

QUICK INSTALLATION AND WIRING

PRESTAZIONI ILLUMINOTECNICHE SENZA PRECEDENTI

A Inlets with M20 cable gland

B Inlets for 16 ÷ 20 mm wireways

AA

A

B

B

B

3m

14,5m

14,5m

5 lux on working plane with reflections

3 m

5 lux on working plane with reflections

10 m

44 m

24 m

12 m

22m

18m

0,5 lux according to UNI EN 1838 Norm

12 m

0,5 lux according to UNI EN 1838 Norm

10 m

60 m

34 m

UNPRECEDENTED LIGHTING PERFORMANCE


1212

4687 PLASTERBOARD RECESSED MOUNTING BRACKET to be ordered separately 4681 SCREEN EDGE MOUNTING 25m to be ordered separately

CEILING EDGE MOUNTING

4687 PLASTERBOARD RECESSED MOUNTING BRACKET to be ordered separately

FALSE CEILING RECESSED MOUNTING

Dima di foratura in dotazione: 308x114 mm

4685 INFINITA LED 45° BRACKET to be ordered separately

45° MOUNTING

3723 SUSPENDED MOUNTING HOOKS to be ordered separately

SUSPENDED MOUNTING

4315 SUSPENDED MOUNTING RODS 250mm to be ordered separately



SUSPENDED MOUNTING WITH RODS

4686 EDGE MOUNTING FIXING BRACKE to be ordered separately 4681 SCREEN EDGE MOUNTING 25m to be ordered separately

EDGE MOUNTING

3912 PROTECTIVE GRILLE (440X215X99 MM) to be ordered separately

PROTECTIVE GRILLE

4683 INFINITA LED RECESS BOX to be ordered separately

RECESSED MOUNTING

Foro incasso: 326 x 132 x 40 mm


1313

15037 LGFM MODULE only for ULTIMATE version

MODULO LGFM

15038 DALI MODULE only for ULTIMATE version

MODULO DALI

20150 CABLECOM CONTROL UNIT only for CABLECOM version

CABLECOM CONTROL UNIT

20151 WiFi / BLE CABLECOM CONNECT CONTROL UNIT only for CABLECOM version

CABLECOM CONNECT CONTROL UNIT

WIFICablecomCablecom

11 24

31170 INFINITA RTI LGS230 SE/SA L 16 500 4,5 8,6 0,6 1/6 31171 INFINITA RTI LGS230 SE/SA XL 16 1400 15,1 16,3 0,6 1/6

LOGICA 230 230V Central Battery System N° Luminous Flux Absorption Absorption Weight PackOrder code Description of LEDs SA lm (DC) W (SA) VA kg

W**

11 24

32110 INFINITA RTI LGS24 SE L 16 500 - 3,9 - 0,6 1/6 32111 INFINITA RTI LGS24 SE/SA XL 16 500 1400 4,3 15,2 0,6 1/6

LOGICA 24 24V Central Battery System N° Luminous Flux SE lm Luminous Flux Absorption Absorption Weight Pack Order code Description of LEDs max SA lm max (DC) W (SA) VA kg

W**

11 24

31174 INFINITA RTI HT L 16 500 4,5 9 0,6 1 31175 INFINITA RTI HT XL 16 1400 15,1 14,9 0,6 1

HT 230 Mains voltage N° Luminous Flux Absorption Absorption Weight PackOrder code Description of LEDs SA lm (DC) W (SA) VA kg

W**

11 24 11 24 24GL

19450 INFINITA RTI IP65 SE CBL LTO L SE 1, 1,5, 2, 3, 8 4,8V 0,5Ah LTO 16 250/170/130/90/40 1 0,6 1/6 19451 INFINITA RTI IP65 SE CBL LTO XL SE 1, 1,5, 2, 3, 8 4,8V 1,2Ah LTO 16 500/340/260/180/70 2,6 0,6 1/6 19452 INFINITA RTI IP65 SA CBL LTO L SE/SA 1, 1,5, 2, 3, 8 4,8V 0,5Ah LTO 16 250/170/130/90/40 90 1,8 0,6 1/6 19453 INFINITA RTI IP65 SA CBL LTO XL SE/SA 1, 1,5, 2, 3, 8 4,8V 1,2Ah LTO 16 500/340/260/180/70 250 4,8 0,6 1/6 19460 INFINITA GL RTI SE/SA CBL LTO SE/SA 1, 1,5, 2, 3, 8 2x4,8V 1,2Ah LTO 16 1000/680/525/370/145 250 4,8 0,6 1/6

Cablecom Autotest/Centraltest N° Average luminous Average luminous Max. Weight PackOrder code Description Version Battery life Battery of LEDs flux SE lm flux SA lm Absorption W kg

W**

36

LOGICA Ultimate Autotest/Centraltest, DALI W**

N° Average luminous Average luminous flux SE lm Average luminous Max. Weight PackOrder code Description Version Battery life Battery of LEDs flux SE lm Impostazione ALTO FLUSSO flux SA lm absorption W kg

19470 INFINITA ULTIMATE RTI SE/SA LTO SE/SA/PS 1/1,5/3h* 9.6V 1.2AH LTO 16 850/600/350 1700/1150/620 850 7/13 0,6 1/6

* The battery life doubles with the Autoripara battery, if the luminaire is set on LONG OPERATING TIME

DOUBLE THE OUTPUT FLUX


14


15


16


17

Infinita LED X5 was born from thedesire to provide multiple light

options with a single luminaire. Fiveinterchangeable optics included toradically change the shape of thelight beam, with the possibility toincrease the installation height or

the centre distance betweenluminaires along emergency exit

routes. The entire Infinita LED line ofluminaires has been designed to

have no limitations on use orinstallation.

Limitless electrical connection andpositioning possibilities in differentarchitectural environments; the

control system can be upgradedfrom AutoTest to CentralTest usingthe Cablecom Control unit that isbased on simple manual or APP

programming.All Infinita LED products are

guaranteed for 10 years thanks tothe Lithium Titanate Battery

included in the standard supplypackage

5 interchangeable optics

Infinita LED X5Rugged

and versatile

TITA

NI

UM BATTERY

W A R R A NTY

10YEAR


infinita leD X5

GenerAl ChArACTerisTiCs

Power* 24, 36W


Operation*** Non-maintained (SE),

Maintained (SA), Public Entertainment

(PS): only the Ultimate vers.

Conformity EN 60598-1, EN 60598-2-2,

EN 60598-2-22, UNI EN 1838,

UNI 11222, EN 62034

Degree of protection IP65, IK08

Battery life CableCom vers. 1h, 1,5h, 2h, 3h, 8h

Infinity mode

Ultimate vers. 1h, 1,5h, 3h

With Autoripara Battery: 2h, 3h, 6h

Overtime function

Charging time CableCom vers. L, GL: 24h - XL: 12h

Ultimate vers. 6h

12h (with Autoripara battery)

Ambient -20°C ÷ +50°C (Titanium Battery)

temperature***

Mounting Wall, suspended ceiling, recessed,

false ceiling, suspended, suspended with

rods

Body Polycarbonate, white RAL 9003

Optics Lens in transparent polycarbonate

Screen Clear polycarbonate

Light source LED - 4000K

** Indicative power for comparison with fluorescent tube luminaires

*** Centralized systems are not included (LOGICA 230, LOGICA 24 AND HT)

for which the parameters refer to the connected central console

18

X5 optical system, with 5 interchangeable lenses included that allow to

radically change the area of intervention of the light beam. The set

includes lenses for installation heights from 2 m to over 6 m. This

innovative optical system offers optimal performance in emergency exit

routes, with intervention areas up to 18m long, and in large areas,

covering surfaces of up to 50sqm.

The body is particularly rugged (IK08-IP65) and provided with several

inlets both on its sides and at the back to ensure quick and optimal

wiring under any installation conditions. The wide range of accessories

makes it possible to solve any issues related to emergency lighting.

With the LTO (Lithium Titanate) battery you can obtain the technical

framework of an absolute luminaire that has no limitations on use.

Quality guaranteed for 10 years.

CABLECOM Version

As standard, it is an AT luminaire with 1h battery life but the jumper can

be used to increase the battery life to 3h. The App or the CableCom

Connect control unit can be used to adjust all the parameters of the

lamp.

ULTIMATE version

Supplied in the centralised version (LG) configured automatically to

Autotest (AT) version unless connected to a control unit. The luminaire

can be transformed from LG into LGFM with the use of only one

accessory. The circuit also allows customising the luminaire according

to the requirements of use by adjusting its battery life (1h/1,5h/3h) and,

on SA versions, it is also possible to switch to PS version, adjusting

the light intensity as desired. The battery life can be doubled and

the luminous flux can be increased by adding the Autoripara

Battery to the standard battery.

- MEMBRANA PRESSACAVO M16 IP65- ADATTATORE TUBO 16/20 BIANCO- LENTE LARGALUCE - montata di serie- LENTE LUNGALUCE (A)- LENTE ALTORISCHIO (B)- LENTE EXTRA LUNGALUCE (C)- LENTE EXTRA LARGALUCE (D)

Accessories included

Cod. Ord. Descrizione

L H

B

24/36 325 130 45

Power** • Dimensions (mm) • W L B H

4683 INFINITA LED RECESS BOX4687 PLASTERBOARD RECESSED MOUNTING BRACKET4685 INFINITA LED 45° BRACKET3912 PROTECTIVE GRILLE (440X215X99)4315 SUSPENDED MOUNTING RODS 250mm4316 SUSPENDED MOUNTING RODS 500mm4317 SUSPENDED MOUNTING RODS 1000mm3723 SUSPENDED MOUNTING HOOKS

Accessories to be ordered separately

Cod. Ordine Descrizione

15037 LGFM MODULE15038 DALI MODULERA04 ADDITIONAL LTO 9.6V 1.2AH BATTERY

Ultimate Accessories to be ordered separately


20150 CABLECOM CONTROL UNIT20151 WIFI/BLE CONNECT CABLECOM CONTROL UNIT

CableCom Accessories to be ordered separately


UVIP65 IK0810hAT/CT

TITA

NIUM BATTERY

W

A R R A N TY

10YEAR


7 m

22 m

10lx 1h 5lx 2h

3 m

with reflectionscalculation plan

12 m

6 m

1 lux according to UNI EN 1838 Normfloor54 m

34 m

LENTE LUNGALUCE (A)

Lens efficiency 85%

22m

22m

12 m

0,5 lux according to UNI EN 1838 Normfloor

LENTE EXTRA LARGALUCE (D)

Lens efficiency 87%

7 m

Ø 3m

30lx minimi

according to UNI EN 1838 Normcalculation plan

LENTE ALTORISCHIO (B)

Lens efficiency 87%

C0-C180 C90-C270

105

90

75

60

45

30

15 0 15

cd/klm

Diagram polar4x18W

300

600

750

450

150

C0-C180 C90-C270

105

90

75

60

45

30

15 0 15

cd/klm

Diagram polar

300

600

750

450

150

C0-C180 C90-C270

105

90

75

60

45

30

15 0 15

cd/klm Diagram polar

300

600

750

450

150

C0-C180 C90-C270

105

90

75

60

45

30

15 0 15

cd/klm

Diagram polar

300

600

750

450

150

- fitted as standard

Lens efficiency 90%

7 m

13m

13m 5lx medi

with reflectionscalculation plan C0-C180 C90-C270

105

90

75

60

45

30

15 0 15

cd/klm Diagram polar

300

600

750

450

150

19

LARGALUCE LENS

LUNGALUCE LENS (A)

LENTE EXTRA LUNGALUCE (C)

Lens efficiency 85%

DIFFERENT INSTALLATIONS WITH CODE 19471 (AUTONOMY 1H)

ALTORISCHIO LENS (B)

EXTRA LARGALUCE LENS (C)

EXTRA LARGALUCE LENS (D)


20

3912 PROTECTVIE GRILLE (440X215X99 MM) to be ordered separately

PROTECTIVE GRILLE

4683 INFINITA LED RECESS BOX to be ordered separately

RECESSED MOUNTING

4687 PLASTERBOARD RECESSED MOUNTING BRACKET to be ordered separately

FALSE CEILING RECESSED MOUNTING

Drilling tool included: 308x114 mm

45° MOUNTING




SUSPENDED MOUNTING WITH RODS

Recessed mounting hole:326 x 132 x 40 mm

3723 SUSPENDED MOUNTING HOOKS to be ordered separately

SUSPENDED MOUNTING


21

24 31172 INFINITA 5X LGS230 SE/SA XL 4 1200 15,1 16,3 0,6 1/6

LOGICA 230 230V Central Battery System N° Luminous Flux Absorption Absorption Weight Pack

Order code Description of LEDs SA lm (DC) W (SA) VA kg W**

24 32112 INFINITA 5X LGS24 SE/SA XL 4 500 1200 4,3 15,2 0,6 1/6

LOGICA 24 24V Central Battery System N° Reduced SE Luminous Flux SE lm Luminous Flux Absorption Absorption Weight Pack

Order code Description of LEDs luminous flux max SA lm max (DC) W(SA) VA kg W**

24 31176 INFINITA 5X HT XL 4 1200 15,1 14,9 0,6 1/6

HT 230 Mains voltage N° Luminous Flux Absorption Absorption Weight Pack

Order code Description of LEDs SA lm (DC) W (SA) VA kg W**

24GL 19461 INFINITA GL 5X SE/SA CBL LTO SE/SA 1, 1,5, 2, 3, 8 2x4,8V 1,2Ah LTO 4 900/600/470/330/130 250 4,78 0,6 1/6

Cablecom Autotest/Centraltest N° Average luminous Average luminous Max. Weight Pack

Order code Description Version Battery life Battery of LEDs flux SE lm flux SA lm Absorption W kg W**

15037 LGFM MODULE only ULTIMATE version

LGFM MODULE

15038 DALI MODULE only ULTIMATE version

DALI MODULE

20150 CABLECOM CONTROL UNIT only CABLECOM version

CABLECOM CONTROL UNIT

20151 CABLECOM CONNECT CONTROL UNIT WiFi / BLE only CABLECOM version

CABLECOM CONNECT CONTROL UNIT

WIFICablecomCablecom

RADDOPPIA IL FLUSSO

36

LOGICA Ultimate Autotest/Centraltest, DALI

W** N° Average luminous Average luminous flux SE lm Average luminous Max. Weight Pack

Order code Description Version Battery life Battery of LEDs flux SE lm Impostazione ALTO FLUSSO flux SA lm absorption W kg

19471 INFINITA ULTIMATE 5X SE/SA LTO SE/SA/PS 1/1,5/3h* LTO 9.6V 1.2AH 4 750/500/300 1500/1000/550 700 7/13 0,6 1/6

* The battery life doubles with the Autoripara battery, if the luminaire is set on LONG OPERATING TIME

DOUBLE THE OUTPUT FLUX


2222


2323


App in AT mode,used as a lamp remote control

List of configuration parameters to be sent to

the emergency lamp by optical control

Emergency lamp framed to start

a functional test

List of test types (functional or battery life) to be

run on the emergency lamp

2424

CableCom Connect App Easy to use and intuitive interface app that allowsto use the smartphone as a remote control

With Beghelli Cablecom you can interact directly with each

individual emergency lamp by one-way optical communication.

You will, therefore, be able to modify the configuration

parameters of each individual luminaire, start diagnostic tests

and run other advanced functions.

CablecomCablecom


App in the CT mode, connected to theCablecom Connect Control Unit

List of operations that can be performed on

the system after connecting to the CableCom

Connect control unit

List of the logbooks available on the control

unit for download in pdf format

Cablecom system configuration with an

indication of the number of lamps to be

purchased and the corresponding

battery life options.

2525

... and in an actualsystem diagnostic control unit

For full control of the “CableCom” centralised system, connect the app to the

“CableCom Connect” control unit.

Use the WiFi technology of the control unit to configure the entire system

automatically, run functional and battery life tests, modify the parameters of any

luminaire and enable advanced features such as the innovative "Infinity Mode”

function that provides infinite battery life.

The Cablecom Connect app is the ideal tool for system maintenance: with a simple

click you can download the periodic maintenance log in pdf format, ready for printing

or storage.


2626

71 60 90 150

• Dimensioni (mm) • Peso L B H g

H

BL

CableCom Control Unit CableCom

TeChniCAl speCifiCATions


Max. Absorption 4,5W

Power factor 0,44

Maximum number 32

of luminaires that

can be controlled

Maximum output 5A

current

Max. cable section 2,5 mm2

(in and out)

Mounting 4 DIN modules

Backup battery LiFe 3.2V 60mAh - autonomy 7 days

for system in case of power failure

clock

*** input Circuit Breaker Recommended (Curve B, C or D) 6A

Centralised emergency lighting control system that can be used to

test the Emergency luminaires and signs.

The great innovation of this system consists in the use of the electrical

network as a communication BUS thanks to a smart system that

enables the system to play a double role. During testing, the system

is put in emergency mode and, therefore, disconnected from the

mains; at the same time, the Control Unit runs the necessary checks

on the luminaires using the wires, temporarily not used for power

supply, as a dedicated luminaire control system via BUS. In the event

of a fault, a light will turn on on the control unit panel to indicate that

a malfunction has been detected on one of the luminaires; the faulty

luminaire will then be identified by the indicator light installed on it.

This is a highly reliable system, simple to install and economic.

Simplified programming: simply set the number of luminaires and

launch the self-acquisition feature of the system.

20150 CABLECOM CONTROL UNIT 150 1

Cablecom Cod. Ordine Descrizione Peso g Imballo


27

H

BL

20151 CABLECOM CONNECT CONTROL UNIT 160 1

Cablecom WiFI

Order Code Description Weight g Pack

CableCom Connect Control Unit CableCom

TeChniCAl speCifiCATions


Max. Absorption 5,5W

Power factor 0,44

Maximum number 32

of luminaires that

can be controlled

Maximum output 5A

current

Max. cable section 2,5 mm2

(in and out)

Mounting 4 DIN modules

Backup battery LiFe 3.2V 60mAh - autonomy 7 days

for system in case of power failure

clock

*** input Circuit Breaker Recommended (Curve B, C or D) 6A

Centralised emergency lighting control system that can be used to

test the Emergency luminaires and signs.

The great innovation of this system consists in the use of the electrical

network as a communication BUS thanks to a smart system that

enables the system to play a double role. During testing, the system

is put in emergency mode and, therefore, disconnected from the

mains; at the same time, the Control Unit runs the necessary checks

on the luminaires using the wires, temporarily not used for power

supply, as a dedicated luminaire control system via BUS. If a fault is

detected, the test results, together with all the parameters of the lamp

and of the system will be sent via WiFi (including the location of the

luminaires).

It can be used to keep a logbook as required by standard EN UNI

11222, with the possibility to download the document in pdf form for

storage.

it can be used to manage the commands sent to one particular

luminaire or broadcasted to several devices.

WIFI

CablecomCablecom

71 60 90 160

• Dimensions (mm) • Weight L B H g

CableCom Connect App

With CableCom Beghelli each emergency

luminaire can communicate by means of

monodirectional optical communication

system.

By this system it is possible to modify the

settings of emergency luminiare

parameters, run functional and autonomy

tests and other functions.CablecomCablecom

EASY TO USE AND INTUITIVE!EASY TO USE AND INTUITIVE!


28

The universal emergency luminaire

Infinita LED RTI

Infinita LED X5


10110YEARYYEYEAYEAR

29


830.144.000

BEGHELLI S.p.A. - Via Mozzeghine 13/15 - 40053 Valsamoggia località Monteveglio

Bologna - Italy - Tel. +39 051 9660411 - Fax +39 051 9660444 - www.beghelli.com


the universal emergency luminaire - beghelli

Documents