Thule Smart RV™ Pod Kit InstallationFor Smooth-Sided Fiberglass RVs

After reviewing all potential interior

and exterior wall obstructions, locate

the Pod mounting line by using a stud

finder.

Turn off all utilities.

Step 1

Using a straight edge or chalk line,

mark a Pod mounting line.

Note: Pod spacing is determined by

the accessory being mounted.

Some accessories will require 16”

spacing, some accessories will require

12” spacing, some accessories will

require no spacing (single pod).

Step 2

Using the provided template, mark the

first Pod location with a bulls eye.

Hold the template to the mounting

spot, and punch the four starter holes

with a center punch.

Step 3

Be careful to only drill into the outer

section of the smooth fiberglass wall!

Drill the small vertical pilot holes for the

backing plate using a 1/16” drill bit.

Drill the large horizontal holes for the

pod using the 3/8” drill bit.

Tip: We recommend applying masking tape to the drill bits to mark the desired depth and to prevent drilling too deep.

Step 4

Prepare the mounting area by lightly

sanding the fiberglass between the

drilled holes, as shown.

Clean the surface of the wall.

Step 5

Apply a thin coat of the waterproof

adhesive (provided) onto the inside

area of the backing plate. Spread

evenly to ensure complete coverage.

Step 6

Insert backing plate into the holes. If

necessary, lightly tap the backing plate

with a rubber mallet to ensure that the

plate is flush against the RV wall.

Wipe off any excess adhesive with a

paper towel.

Step 7

Reinforce plate with the two small #6 x

½” screws. These are set screws

and prevent the backing plate from

moving while the adhesive cures and

sets prior to the installation of the pod.

Step 8

Attach the Pod assembly onto the

backing plate using the larger ¼”- 20

screws after the Pod adhesive has

cured completely (24-48 hours).

Step 9

Finished!

The SMART RV accessories can now be safely mounted.

When Pods are not is use, you can cover the Pods with the Pod covers, included.