tisi library accession lists december 2002-january...

TISI Library Accession List (Dec2002-Jan2003)

TISI Library Accession ListsDecember 2002-January 2003

ACCESS DSM MS 1184 2002 Code of practice on access for disabled persons to public buildings / By Department of Standards Malaysia

(DSM). Selangor D.E.: DSM, 2002.ACOUSTIC MEASUREMENT ISO ISO 11904-1 2002 Acoustics - Determination of sound immission from sound sources placed close to the ear - P.1:

Technique using a microphone in a real ear (MIRE technique) / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ISO 12124 2001 Acoustics - Procedures for the measurement of real-ear acoustical characteristics of hearing aids / ByInternational Organization for Standardization (ISO). Geneva : ISO, 2001.

ISO 2922 2000 Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours / ByInternational Organization for Standardization (ISO). 2nd ed. - - Geneva : ISO, 2000.

ISO/TS 13475-2 2000 Acoustics - Stationary audible warning devices used outdoors - P.2: Precision methods fordetermination of sound emission quantities / By International Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO 15186-1 2000 Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity- P.1: Laboratory measurements / By International Organization for Standardization (ISO). Geneva : ISO, 2000.

ACOUSTIC TESTING ISO ISO 140-12 2000 Acoustics - Measurement of sound insulation in building and of building elements - P.12: Laboratory

measurement of room-to-room airborne and impact sound insulation of an access floor / By International Organization forStandardization (ISO). Geneva : ISO, 2000.

ACOUSTICS ISO ISO 11904-1 2002 Acoustics - Determination of sound immission from sound sources placed close to the ear - P.1:

Technique using a microphone in a real ear (MIRE technique) / By International Organization for Standardization (ISO).Geneva: ISO, 2002.


ISO 12124 2001 Acoustics - Procedures for the measurement of real-ear acoustical characteristics of hearing aids / ByInternational Organization for Standardization (ISO). Geneva : ISO, 2001.

ISO 15664 2001 Acoustics - Noise control design procedures for open plant / By International Organization forStandardization (ISO). Geneva : ISO, 2001.

ISO 3747 2000 Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparisonmethod in situ / By International Organization for Standardization (ISO). 2nd ed. - - Geneva : ISO, 2000.

ISO 7029 2000 Acoustics - Statistical distribution of hearing thresholds as a function of age / By International Organizationfor Standardization (ISO). 2nd ed. - - Geneva : ISO, 2000.

ISO/TS 13475-2 2000 Acoustics - Stationary audible warning devices used outdoors - P.2: Precision methods fordetermination of sound emission quantities / By International Organization for Standardization (ISO). Geneva : ISO, 2000.

ACRYLONITRILE BUTADIENE STYRENE ISO ISO 2580-1 2002 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - P.1: Designation

system and basis for specifications / By International Organization for Standardization (ISO). 5th ed. - - Geneva: ISO; 2002.

ADHESION TESTS ISO ISO 6238 2001 Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by compressive loading / By

International Organization for Standardization (ISO). 2nd ed. - - Geneva : ISO, 2001.

ADHESIVE-BONDED JOINTS ISO ISO 6238 2001 Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by compressive loading / By

International Organization for Standardization (ISO). 2nd ed. - - Geneva : ISO, 2001.ADHESIVES BSI BS EN 12004 2001 Adhesives for tiles - Definitions and specifications / By British Standards Institution (BSI). London:

BSI, 2001. ISO ISO 6238 2001 Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by compressive loading / By

International Organization for Standardization (ISO). 2nd ed. - - Geneva : ISO, 2001.


AGRICULTURAL EQUIPMENT ISO ISO 11520-2 2001 Agricultural grain driers - Determination of drying performance - P.2: Additional procedures and crop-

specific requirements / By International Organization for Standardization (ISO). Geneva : ISO, 2001.

AIDS FOR THE DISABLED DSM MS 1184 2002 Code of practice on access for disabled persons to public buildings / By Department of Standards Malaysia

(DSM). Selangor D.E.: DSM, 2002.

AIRCRAFT ISO ISO 10299 2000 Aerospace - Rivets, solid - Material and metric series identification / By International Organization for

Standardization (ISO). Geneva : ISO, 2000. ISO 10959 2000 Aerospace - MJ threads - Gauging / By International Organization for Standardization (ISO). Geneva :

ISO, 2000. ISO 11076 2000 Aerospace - Aircraft de-icing/anti-icing methods with fluids / By International Organization for

Standardization (ISO). 3rd ed. - - Geneva : ISO, 2000. ISO 12288 2000 Aerospace - Rivets, solid, in nickel alloy - Procurement specification / By International Organization for

Standardization (ISO). Geneva : ISO, 2000. ISO 12290 2000 Aerospace - Rivets, solid, in titanium or titanium alloy - Procurement specification / By International

Organization for Standardization (ISO). Geneva : ISO, 2000. ISO 12333 2000 Aerospace - Constant displacement hydraulic motors - General specifications for 35 000 kPa systems / By

International Organization for Standardization (ISO). Geneva : ISO, 2000. ISO 12334 2000 Aerospace - Hydraulic, pressure-compensated, variable delivery pumps - General requirements for 35 000

kPa systems / By International Organization for Standardization (ISO). Geneva : ISO, 2000. ISO 13595 2000 Aerospace - Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated

- Dimensions / By International Organization for Standardization (ISO). Geneva : ISO, 2000. ISO 13596 2000 Aerospace - Inserts, self-locking, with MJ threads, closed type, in metallic material, coated or uncoated -

Dimensions / By International Organization for Standardization (ISO). Geneva : ISO, 2000. ISO 13597 2000 Aerospace - Inserts, self-locking, with MJ threads, open type, in metallic material, coated or uncoated -

Dimensions / By International Organization for Standardization (ISO). Geneva : ISO, 2000.


ISO 13598 2000 Aerospace - Inserts, self-locking, with MJ threads, reduced flanges, closed type, in metallic material, coatedor uncoated - Dimensions / By International Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO 13599 2000 Aerospace - Inserts, with clearance hole, in metallic material, coated or uncoated - Dimensions / ByInternational Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO 7481 2000 Aerospace - Nuts, self-locking, with maximum operating temperature less than or equal to 425 degree C-Test methods / By International Organization for Standardization (ISO). 2nd ed. - - Geneva : ISO, 2000.

ISO 8788 2000 Aerospace - Nuts, metric - Tolerances of form and position / By International Organization forStandardization (ISO). 2nd ed. - - Geneva : ISO, 2000.

ISO 9736 2000 Aerospace - Eye-ends, in steel, threaded, for aircraft control wire rope - Dimensions and loads / ByInternational Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO 9737 2000 Aerospace - Eye-ends, in corrosion - resistant steel, swaged on aircraft control wire rope - Dimensions andloads / By International Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO 9738 2000 Aerospace - Turnbarrels, for aircraft control wire rope - Dimensions and loads / By InternationalOrganization for Standardization (ISO). Geneva : ISO, 2000.

ISO 9747 2000 Aerospace - Double-shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -Dimensions and loads / By International Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO 9748 2000 Aerospace - Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions andloads / By International Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO 9749 2000 Aerospace - Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions andloads / By International Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO 9757 2000 Aerospace - Fork-ends, in steel, threaded, for aircraft control wire rope turnbarrels - Dimensions and loads /By International Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO 9758 2000 Aerospace - Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope - Dimensionsand loads / By International Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO 9759 2000 Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions andloads / By International Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO 9760 2000 Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings- Dimensions and loads / By International Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO 9761 2000 Aerospace - Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles -Dimensions / By International Organization for Standardization (ISO). Geneva : ISO, 2000.


ISO 9762 2000 Aerospace - Aircraft control wire rope assemblies - Dimensions and end-fitting combinations / ByInternational Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO/TR 10201 2001 Aerospace - Standards for electronic instruments and systems / By International Organization forStandardization (ISO). 4th ed. - - Geneva : ISO, 2001.

AIRCRAFT COMPONENTS ISO ISO 10299 2000 Aerospace - Rivets, solid - Material and metric series identification / By International Organization for

Standardization (ISO). Geneva : ISO, 2000. ISO 12288 2000 Aerospace - Rivets, solid, in nickel alloy - Procurement specification / By International Organization for

Standardization (ISO). Geneva : ISO, 2000. ISO 12290 2000 Aerospace - Rivets, solid, in titanium or titanium alloy - Procurement specification / By International

Organization for Standardization (ISO). Geneva : ISO, 2000. ISO 12333 2000 Aerospace - Constant displacement hydraulic motors - General specifications for 35 000 kPa systems / By

International Organization for Standardization (ISO). Geneva : ISO, 2000.

AIRCRAFT CONTROLS ISO ISO 9736 2000 Aerospace - Eye-ends, in steel, threaded, for aircraft control wire rope - Dimensions and loads / By

International Organization for Standardization (ISO). Geneva : ISO, 2000. ISO 9737 2000 Aerospace - Eye-ends, in corrosion - resistant steel, swaged on aircraft control wire rope - Dimensions and

loads / By International Organization for Standardization (ISO). Geneva : ISO, 2000.

ALUMINIUM ISO ISO 6257 2002 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Sampling / By

International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ANALOGUE SIGNALS IEC IEC 61880-2 2002 Video systems (525/60) - Video and accompanied data using the vertical blanking interval - c- P.2: 525

progressive scan system / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.


ANIMAL FEED CSBTS GB/T 13083 2002 Determination of fluorine in feed - Ion selective electrode method / By China State Bureau of Quality and

Technical Supervision (CSBTS). Beijing: CSBTS, 2002. DSM MS 1543 2002 Duck feeds / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.

ARC-WELDING EQUIPMENT IEC IEC 60974-2 2002 Arc welding equipment - P.2: Liquid cooling systems / By International Electrotechnical Commission

(IEC). Geneva: IEC; 2002.

AUTOMATIC CONTROL SYSTEMS IEC IEC 60730-2-9 2000 Automatic electrical controls for household and similar use - P.2-9: Particular requirements for

temperature sensing controls / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

BANKING ISO ISO 15782-2 2001 Banking - Certification management - P.2: Certificate extensions / By International Organization for

Standardization (ISO). Geneva: ISO, 2001.

BLANKETS IEC IEC 61112 2002 Blankets of insulating material for electrical purposes / By International Electrotechnical Commission


BOARD (PAPER) ISO ISO 4046-1 2002 Paper, board, pulps and related terms - Vocabulary - P.1: Alphabetical index / By International

Organization for Standardization (ISO). Geneva: ISO, 2002.


ISO 4046-4 2002 Paper, board, pulps and related terms - Vocabulary - P.4: Paper and board grades and converted products /By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 4046-5 2002 Paper, board, pulps and related terms - Vocabulary - P.5: Properties of pulp, paper and board / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

BUILDINGS DSM MS 1553 2002 Code of practice on wind loading for building structure / By Department of Standards Malaysia (DSM).

Selangor D.E.: DSM, 2002. SABS SABS 523 2002 Limes for use in building / By South African Bureau of Standards (SABS). 2.1 ed. - - Pretoria: SABS,

2002.BURETTES ISO ISO 8655-3 2002 Piston-operated volumetric apparatus - P.3: Piston burettes / By International Organization for

Standardization (ISO). Geneva: ISO, 2002.CAMERAS IEC IEC 60050-808 2002 International Electrotechnical Vocabulary - P.808: Video cameras for non-broadcasting / By

International Electrotechnical Commission (IEC). Geneva: IEC 2002.CERAMICS ISO ISO 15165 2001 Fine ceramics (advanced ceramics, advanced technical ceramics) - Classification system / By International

Organization for Standardization (ISO). Geneva: ISO, 2001. ISO 17562 2001 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal

expansion of monolithic ceramics by push-rod technique / By International Organization for Standardization (ISO). Geneva:ISO, 2001.

CEREALS ISO ISO 11520-2 2001 Agricultural grain driers - Determination of drying performance - P.2: Additional procedures and crop-

specific requirements / By International Organization for Standardization (ISO). Geneva : ISO, 2001.


CLASSIFICATION SYSTEMS IEC IEC/TR 60721-4-0 2002 Classification of environmental conditions - P.4-0: Guidance for the correlation and transformation

of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Introduction / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.

ISO ISO 15165 2001 Fine ceramics (advanced ceramics, advanced technical ceramics) - Classification system / By International


CLEANING EQUIPMENT CSBTS GB 13960.12 2001 Safety of transportable motor-operated electric tools - P.2: Particular requirements for high pressure

cleaners / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2001. IEC IEC 60335-2-79 2002 Household and similar electrical appliances - Safety - P.2-79: Particular requirements for high

pressure cleaners and steam cleaners / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

CLOCKS IEC IEC 60335-2-26 2002 Household and similar electrical appliances - Safety - P.2-26: Particular requirements for clocks / By

International Electrotechnical Commission (IEC). 4th ed. - - Geneva: IEC, 2002.

CLOTH SLSI SLS 369 2001 Polyester cotton/rayon shirting materials / By Sri Lanka Standards Institution (SLSI). Colombo: SLSI, 2001.

COAL CSBTS GB/T 11957 2001 Determination of yield of humic acids in coal / By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing CSBTS, 2001. GB/T 220 2001 Determination of carboxyreactivity of coal / By China State Bureau of Quality and Technical Supervision

(CSBTS). Beijing: CSBTS, 2001.


COATED FABRICS CSBTS GB/T 12584 2001 Rubber or plastics coated fabrics - Low-temperature impact test / By China State Bureau of Quality and

Technical Supervision (CSBTS). Beijing: CSBTS, 2001. GB/T 12585 2001 Rubber, vulcanized or thermoplastic - Rubber sheet and rubber-coated fabric - Determination rate of

volatile liquids (gravimetic technique) / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS,2001.

COMMUNICATION CABLES IEC IEC 62012-1 2002 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments

- P.1: Generic specification / By International Electrotechnical Commission (IEC). Geneva: IEC; 2002.COMMUNICATION PROCEDURES DSM MS 1536 P.3 2002 Information technology - Guidelines for the management of IT security - P.3: Techniques for the

management of IT security / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. MS 1536 P.4 2002 Information technology - Guidelines for the management of IT security - P.4: Selection of safeguards /

By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.

COMPARATORS IEC IEC 61481 2001 Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c. / By International

Electrotechnical Commission (IEC). Consolidated with Amd 1 2002. - - Geneva: IEC; 2002.

COMPRESSORS IEC IEC 60335-2-34 2002 Household and similar electrical appliances - Safety - P.2-34: Particular requirements for motor-

compressors / By International Electrotechnical Commission (IEC). 4th ed. - - Geneva: IEC, 2002.COMPUTER NETWORKS ISO ISO 15849 2001 Ships and marine technology - Guidelines for implementation of a fleet management system network / By

International Organization for Standardization (ISO). Geneva: ISO, 2001.


CONSTRUCTION SYSTEMS DSM MS 1535 P.2 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.2: General construction / By

Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.

CONTROL SYSTEMS ISO ISO 15622 2002 Transport information and control systems - Adaptive cruise control systems - Performance requirements

and test procedures / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 15623 2002 Transport information and control systems - Forward vehicle collision warning systems - Performance

requirements and test procedures / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

CONVEYOR BELTS CSBTS GB/T 12753 2002 Steel wire ropes for conveyer belts / By China State Bureau of Quality and Technical Supervision


COOKING APPLIANCES DSM MS 1535 P.1 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.1: Specification / By

Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. MS 1535 P.2 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.2: General construction / By

Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. MS 1535 P.3 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.3: Test methods / By

Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. MS 1535 P.4 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.4: Glossar / By Department

of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. IEC IEC 60335-2-31 2002 Household and similar electrical appliances - Safety - P.2-31: Particular requirements for range hoods

/ By International Electrotechnical Commission (IEC). 4th ed. - - Geneva: IEC, 2002.


IEC 60335-2-36 2002 Household and similar electrical appliances - Safety - P.2-36: Particular requirements for commercialelectric cooking range, ovens, hobs and hob elements / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva:IEC, 2002.

CORK ISO ISO 9366 2001 Agglomerated cork floor tiles - Determination of dimensions and deviation from squareness and from

straightness of edges / By International Organization for Standardization (ISO).CORROSION-RESISTANT STEELS ISO ISO 9737 2000 Aerospace - Eye-ends, in corrosion - resistant steel, swaged on aircraft control wire rope - Dimensions and

loads / By International Organization for Standardization (ISO). Geneva : ISO, 2000. ISO 9747 2000 Aerospace - Double-shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -

Dimensions and loads / By International Organization for Standardization (ISO). Geneva : ISO, 2000. ISO 9748 2000 Aerospace - Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and

loads / By International Organization for Standardization (ISO). Geneva : ISO, 2000. ISO 9749 2000 Aerospace - Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and

loads / By International Organization for Standardization (ISO). Geneva : ISO, 2000. ISO 9759 2000 Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and

loads / By International Organization for Standardization (ISO). Geneva : ISO, 2000. ISO 9760 2000 Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings

- Dimensions and loads / By International Organization for Standardization (ISO). Geneva : ISO, 2000. ISO 9761 2000 Aerospace - Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles -

Dimensions / By International Organization for Standardization (ISO). Geneva : ISO, 2000.CORRUGATED SAA AS/NZS 2908.1 2000 Cellulose-cement products - P.1: Corrugated sheets / By Standards Australia (SAA). New South

Wales: SAA, 2000. COTTON SLSI SLS 137 P.1 2000 Grey cotton yarn - P.1: For Powerloom / By Sri Lanka Standards Institution (SLSI). 2nd ed. - -

Colombo: SLSI, 2000.


SLS 288 2000 Method for determination of the fluidity of cotton, rayons and cellulose acetate in cuprammonium hydroxidesolution / By Sri Lanka Standards Institution (SLSI). Colombo: SLSI, 2000.

SLS 369 2001 Polyester cotton/rayon shirting materials / By Sri Lanka Standards Institution (SLSI). Colombo: SLSI, 2001.

CRANES DSM MS 1544 P.1 2002 Cranes - Safe use - P.1: General / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM,

2002.

DAIRY PRODUCTS ISO ISO 14673-1 2001 Milk and milk products - Determination of nitrate and nitrite contents - P.1: Method using cadmium

reduction and spectrometry / By International Organization for Standardization (ISO). Geneva: ISO, 2001. ISO 14673-2 2001 Milk and milk products - Determination of nitrate and nitrite contents - P.2: Method using segmented

flow analysis (Routine method) / By International Organization for Standardization (ISO). Geneva: ISO, 2001.

DANGEROUS MATERIALS DSM MS 1513 P.1 Sub-P.1 2002 Packaging - Transport of dangerous goods - P.1: General provision, definitions and training -

Sub-P.1: General provisions / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. MS 1513 P.5 Sub-P.2 2001 Packaging - Transport of dangerous goods - P.5: Consignment procedures - Sub-P.2: Marking,

labelling and placarding / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001. MS 1513 P.5 Sub-P.4 2002 Packaging - Transport of dangerous goods - P.5: Consignment procedures - Sub-P.4: Special

provisions / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. MS 1513 P.7 2002 Packaging - Transport of dangerous goods - P.7: Provisions concerning transport operations / By


DATA PROCESSING DSM MS 1536 P.3 2002 Information technology - Guidelines for the management of IT security - P.3: Techniques for the

management of IT security / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.


MS 1536 P.4 2002 Information technology - Guidelines for the management of IT security - P.4: Selection of safeguards /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.

DATA TRANSFER ISO ISO 14961 2002 Space data and information transfer systems - Parameter value language specification / By International

Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

DEFIBRILLATORS IEC IEC 60601-2-4 2002 Medical electrical equipment - P.2-4: Particular requirements for the safety of cardiac defibrillators /

By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

DESIGNATIONS ISO ISO 6402-1 2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS)

and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - P.1: Designation system and basisfor specifications / By International Organization for Standardization (ISO). 4th ed. - - Geneva: ISO, 2002.

ISO 10366-1 2002 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials- P.1: Designation system and basis for specifications / By International Organization for Standardization (ISO). 2nd ed. - -Geneva: ISO, 2002.

ISO 2580-1 2002 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - P.1: Designationsystem and basis for specifications / By International Organization for Standardization (ISO). 5th ed. - - Geneva: ISO; 2002.

DETERMINATION OF CONTENT CSBTS GB/T 13083 2002 Determination of fluorine in feed - Ion selective electrode method / By China State Bureau of Quality and

Technical Supervision (CSBTS). Beijing: CSBTS, 2002. ISO ISO 14673-1 2001 Milk and milk products - Determination of nitrate and nitrite contents - P.1: Method using cadmium

reduction and spectrometry / By International Organization for Standardization (ISO). Geneva: ISO, 2001.


ISO 14673-2 2001 Milk and milk products - Determination of nitrate and nitrite contents - P.2: Method using segmentedflow analysis (Routine method) / By International Organization for Standardization (ISO). Geneva: ISO, 2001.

ISO 14673-3 2001 Milk and milk products - Determination of nitrate and nitrite contents - P.3: Method using cadmiumreduction and flow injection analysis with in line dialysis (Routine method) / By International Organization for Standardization(ISO). Geneva: ISO, 2001.

DIAGNOSIS (MEDICAL) ISO ISO 15194 2002 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin -

Description of reference materials / By International Organization for Standardization (ISO). Geneva: ISO, 2002. IEC IEC 61676 2002 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube

voltage in diagnostic radiology / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

DILUTORS ISO ISO 8655-4 2002 Piston-operated volumetric apparatus - P.4: Dilutors / By International Organization for Standardization

(ISO). Geneva: ISO, 2002.

DIMENSIONAL CHANGES ISO ISO 9366 2001 Agglomerated cork floor tiles - Determination of dimensions and deviation from squareness and from

straightness of edges / By International Organization for Standardization (ISO).

DISABLED PEOPLE DSM MS 1184 2002 Code of practice on access for disabled persons to public buildings / By Department of Standards Malaysia


DISPENSERS ISO ISO 8655-5 2002 Piston-operated volumetric apparatus - P.5: Dispensers / By International Organization for



DOSIMETER IEC IEC 61676 2002 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube

voltage in diagnostic radiology / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.ELECTRIC CABLES IEC IEC 60331-31 2002 Tests for electric cables under fire conditions - Circuit integrity - P.31: Procedures and requirements for

fire with shock - Cables of rated voltage up to and including 0,6/1 kV / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.

ELECTRIC CONDUCTORS IEC IEC 61479 2001 Live working - Flexible conductor covers (line hoses) of insulating material / By International

Electrotechnical Commission (IEC). Geneva: IEC; 2002.

ELECTRIC CONNECTORS IEC IEC/PAS 61076-3-104 2002 Connectors for electronic equipment - P.3-104: Detail specification for 8-way, shielded free and

fixed connectors for data transmissions with frequencies up to 600 MHz minimum / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2002.

IEC/PAS 61076-3-111 2002 Connectors for electronic equipment - P.3-111: Detail specification for 8-way, shield andunshielded, free and fixed connectors, for industrial environments for frequencies up to 250 MHz / By InternationalElectrotechnical Commission (IEC). Geneva: IEC; 2002.

ELECTRIC CONTROL EQUIPMENT CSBTS GB 14048.5 2001 Low-voltage switchgear and controlgear - P.5-1: Control circuit devices and switching element -

Electromechanical control circuit devices / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2001.

ELECTRIC FENCES IEC IEC 60335-2-76 2002 Household and similar electrical appliances - Safety - P.2-76: Particular requirements for electric

fence energizers / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.


ELECTRIC FURNACES IEC IEC 60519-6 2002 Safety in electroheat installations - P.6: Specifications for safety in industrial microwave heating

equipment / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002. IEC 61922 2002 High-frequency induction heating installations - Test methods for the determination of power output of the

generator / By International Electrotechnical Commission (IEC). Geneva: IEC; 2002.

ELECTRIC MOTORS IEC IEC 60335-2-34 2002 Household and similar electrical appliances - Safety - P.2-34: Particular requirements for motor-

compressors / By International Electrotechnical Commission (IEC). 4th ed. - - Geneva: IEC, 2002.

ELECTRIC PLUGS IEC IEC 60884-1 2002 Plugs and socket-outlets for household and similar purposes - P.1: General requirements / By

International Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2002.

ELECTRIC POWER STATIONS IEC IEC/TR 62140-1 2002 Fossil-fired steam power stations - P.1: Limiting controls / By International Electrotechnical

Commission (IEC). Geneva: IEC, 2002.

ELECTRIC POWER SYSTEMS DSM MS 1533 2002 Recommended practices in monitoring electric power quality / By Department of Standards Malaysia


ELECTRIC SUBSTATIONS IEC IEC 60099-6 2002 Surge arresters - P.6: Surge arresters containing both series and parallel gapped structures - Rated 52 kV

and less / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.


ELECTRICAL CONDUCTIVITY IEC IEC 61788-10 2002 Superconductivity - P.10: Critical temperature measurement - Critical temperature of Nb-Ti, Nb3Sn, and

Bi-system oxide composite superconductors by a resistance method / By International Electrotechnical Commission (IEC).Geneva: IEC; 2002.

IEC 61788-12 2002 Superconductivity - P.12: Matrix to superconductor volume ratio measurement - Copper to non-coppervolume ratio of Nb3Sn composite superconducting wires / By International Electrotechnical Commission (IEC). Geneva: IEC;2002.

ELECTRICAL EQUIPMENT IEC IEC 60079-10 2002 Electrical apparatus for explosive gas atmospheres - P.10: Classification of hazardous areas / By

International Electrotechnical Commission (IEC). 4th ed. - - Geneva: IEC, 2002. IEC 60079-14 2002 Electrical apparatus for explosive gas atmospheres - P.14: Electrical installations in hazardous areas

(other than mines) / By International Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2002. IEC 60417-1 2002 Graphical symbols for use on equipment - P.1: Overview and application / By International

Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2002. IEC 61477 2001 Live working - Minimum requirements for the utilization of tools, devices and equipment / By

International Electrotechnical Commission (IEC). Geneva: IEC; 2002.

ELECTRICAL HOUSEHOLD APPLIANCES IEC IEC 60335-2-10 2002 Household and similar electrical appliances - Safety - P.2-10: Particular requirements for floor

treatment machines and wet scrubbing machines / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva: IEC,2002.

IEC 60335-2-103 2002 Household and similar electrical appliances - Safety - P.2-103: Particular requirements for drives forgates, doors and windows / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 60335-2-13 2002 Household and similar electrical appliances - Safety - P.2-13: Particular requirements for deep fatfryers, frying pans and similar appliances / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva: IEC, 2002.

IEC 60335-2-17 2002 Household and similar electrical appliances - Safety - P.2-17: Particular requirements for blankets,pads and similar flexible heating appliances / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC,2002.


IEC 60335-2-26 2002 Household and similar electrical appliances - Safety - P.2-26: Particular requirements for clocks / ByInternational Electrotechnical Commission (IEC). 4th ed. - - Geneva: IEC, 2002.

IEC 60335-2-31 2002 Household and similar electrical appliances - Safety - P.2-31: Particular requirements for range hoods/ By International Electrotechnical Commission (IEC). 4th ed. - - Geneva: IEC, 2002.

IEC 60335-2-34 2002 Household and similar electrical appliances - Safety - P.2-34: Particular requirements for motor-compressors / By International Electrotechnical Commission (IEC). 4th ed. - - Geneva: IEC, 2002.


IEC 60335-2-37 2002 Household and similar electrical appliances - Safety - P.2-37: Particular requirements for commercialelectric deep fat fryers / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva: IEC, 2002.

IEC 60335-2-44 2002 Household and similar electrical appliances - Safety - P.2-44: Particular requirements for ironers / ByInternational Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2002.

IEC 60335-2-56 2002 Household and similar electrical appliances - Safety - P.2-56: Particular requirements for projectorsand similar appliances / By International Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2002.

IEC 60335-2-59 2002 Household and similar electrical appliances - Safety - P.2-59: Particular requirements for insect killers/ By International Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2002.

IEC 60335-2-76 2002 Household and similar electrical appliances - Safety - P.2-76: Particular requirements for electricfence energizers / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 60335-2-77 2002 Household and similar electrical appliances - Safety - P.2-77: Particular requirements for pedestriancontrolled mains-operated lawnmowers / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 60335-2-79 2002 Household and similar electrical appliances - Safety - P.2-79: Particular requirements for highpressure cleaners and steam cleaners / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 60335-2-8 2002 Household and similar electrical appliances - Safety - P.2-8: Particular requirements for shavers, hairclippers and similar appliances / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva: IEC, 2002.

IEC 60335-2-80 2002 Household and similar electrical appliances - Safety - P.2-80: Particular requirements for fans / ByInternational Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 60335-2-91 2002 Household and similar electrical appliances - Safety - P.2-91: Particular requirements for walk-behindand hand-held lawn trimmers and lawn edge trimmers / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva:IEC, 2002.


ELECTRICAL INSTALLATIONS IEC IEC 61822 2002 Electrical installations for lighting and beaconing of aerodromes - Constant current regulators / By

International Electrotechnical Commission (IEC). Geneva: IEC, 2002.ELECTRICAL INSULATING MATERIALS IEC IEC 61111 2002 Matting of insulating material for electrical purposes / By International Electrotechnical Commission

(IEC). Geneva: IEC; 2002. IEC 61112 2002 Blankets of insulating material for electrical purposes / By International Electrotechnical Commission

(IEC). Geneva: IEC; 2002. IEC 61479 2001 Live working - Flexible conductor covers (line hoses) of insulating material / By International

Electrotechnical Commission (IEC). Geneva: IEC; 2002.ELECTRICAL INSULATION IEC IEC/TS 60071-5 2002 Insulation co-ordination - P.5: Procedures for high-voltage direct current (HVDC) converter stations /

By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 60664-1 2002 Insulation coordination for equipment within low-voltage systems - P.1: Principles, requirements and

tests / By International Electrotechnical Commission (IEC). Geneva: IEC; 2002.ELECTRICAL MEDICAL EQUIPMENT IEC IEC 61676 2002 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube

voltage in diagnostic radiology / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.ELECTRICAL PROTECTION EQUIPMENT IEC IEC 60895 2002 Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and +; 600 kV d.c. / By

International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.ELECTRICAL PROTTECTION EQUIPMENT IEC IEC 60984 2002 Sleeves of insulating material for live working / By International Electrotechnical Commission (IEC).

Geneva: IEC; 2002.


ELECTROCHEMICAL DEVICES IEC IEC 60746-3 2002 Expression of performance of electrochemical analyzers - P.3: Electrolytic conductivity / By

International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC; 2002.

ELECTROMAGNETIC COMPATIBILITY (EMC) IEC IEC 60728-2 2002 Cabled distribution systems for television and sound signals - P.2: Electromagnetic compatibility for

equipment / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 61000-2-4 2002 Electromagnetic compatibility (EMC) - P.2-4: Environment - Compatibility levels in industrial plants

for low-frequency conducted disturbances / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC; 2002.

ELECTROMAGNETISM IEC IEC 60050-131 2002 International Electrotechnical Vocabulary - P.131: Circuit theor / By International Electrotechnical

Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

ENERGY SOURCES IEC IEC 60335-2-76 2002 Household and similar electrical appliances - Safety - P.2-76: Particular requirements for electric

fence energizers / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

ENGINEERING DRAWINGS ISO ISO 15787 2001 Technical product documentation - Heat-treated ferrous parts - Presentation and indications / By

International Organization for Standardization (ISO). Geneva : ISO ; 2001.

ENVIRONMENTAL MANAGEMENT ISO ISO/TR 14062 2002 Environmental management - Integrating environmental aspects into product design and development /

By International Organization for Standardization (ISO). Geneva: ISO, 2002.


ENVIRONMENTAL TESTING IEC IEC/TR 60721-4-0 2002 Classification of environmental conditions - P.4-0: Guidance for the correlation and transformation

of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Introduction / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.

EQUIPMENT SAFETY ISO ISO 14738 2002 Safety of machinery - Anthropometric requirements for the design of workstations at machinery / By


ERGONOMICS ISO ISO 14915-3 2002 Software ergonomics for multimedia user interfaces - P.3: Media selection and combination / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/TR 19358 2002 Ergonomics - Construction and application of tests for speech technology / By International


EXPLOSIVE ATMOSPHERES IEC IEC 60079-10 2002 Electrical apparatus for explosive gas atmospheres - P.10: Classification of hazardous areas / By

International Electrotechnical Commission (IEC). 4th ed. - - Geneva: IEC, 2002. IEC 60079-14 2002 Electrical apparatus for explosive gas atmospheres - P.14: Electrical installations in hazardous areas

(other than mines) / By International Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2002.FANS IEC IEC 60335-2-80 2002 Household and similar electrical appliances - Safety - P.2-80: Particular requirements for fans / By

International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.FINENESS CSBTS GB 11887 2002 Jewellery - Fineness of precious metal alloys and designation / By China State Bureau of Quality and

Technical Supervision (CSBTS). Beijing: CSBTS, 2002.


FIRE EXTINGUISHERS DSM MS 1539 P.1 2002 Portable fire extinguishers - P.1: Construction and testing methodology / By Department of Standards

Malaysia (DSM). Selangor D.E.: DSM, 2002.

FIRE RISKS IEC IEC 60331-31 2002 Tests for electric cables under fire conditions - Circuit integrity - P.31: Procedures and requirements for


FLOOR CLEANING EQUIPMENT IEC IEC 60335-2-10 2002 Household and similar electrical appliances - Safety - P.2-10: Particular requirements for floor


FLUORINE CSBTS GB/T 13083 2002 Determination of fluorine in feed - Ion selective electrode method / By China State Bureau of Quality and


FLUSHING CISTERNS DSM MS 795 2002 WC flushing cisterns and flush pipes / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM,

2002.

FRYING PANS IEC IEC 60335-2-13 2002 Household and similar electrical appliances - Safety - P.2-13: Particular requirements for deep fat

fryers, frying pans and similar appliances / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva: IEC, 2002. IEC 60335-2-37 2002 Household and similar electrical appliances - Safety - P.2-37: Particular requirements for commercial

electric deep fat fryers / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva: IEC, 2002.


GARDENING EQUIPMENT IEC IEC 60335-2-91 2002 Household and similar electrical appliances - Safety - P.2-91: Particular requirements for walk-behind

and hand-held lawn trimmers and lawn edge trimmers / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva:IEC, 2002.

GRAPHIC SYMBOLS IEC IEC 60417-1 2002 Graphical symbols for use on equipment - P.1: Overview and application / By International

Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2002.GRAVIMETRIC ANALYSIS ISO ISO 8655-6 2002 Piston-operated volumetric apparatus - P.6: Gravimetric methods for the determination of measurement

error / By International Organization for Standardization (ISO). Geneva: ISO, 2002.HAND TOOLS IEC IEC 60745-2-4 2002 Hand-held motor-operated electric tools - Safety - P.2-4: Particular requirements for sanders and

polishers other than disk type / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.HEARING AIDS ISO ISO 12124 2001 Acoustics - Procedures for the measurement of real-ear acoustical characteristics of hearing aids / By

International Organization for Standardization (ISO). Geneva : ISO, 2001.HEATERS IEC IEC 60335-2-17 2002 Household and similar electrical appliances - Safety - P.2-17: Particular requirements for blankets,

pads and similar flexible heating appliances / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC,2002.

HOUSEHOLD EQUIPMENT IEC IEC 60884-1 2002 Plugs and socket-outlets for household and similar purposes - P.1: General requirements / By



HYDRAULIC TRANSMISSION SYSTEMS ISO ISO 18413 2002 Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related

to contaminant collection, analysis and data reporting / By International Organization for Standardization (ISO). Geneva: ISO,2002.

IDENTITY CARDS ISO ISO/IEC 7811-1 2002 Identification cards - Recording technique - P.1: Embossing / By International Organization for

Standardization (ISO). 3rd ed. - - Geneva: ISO, 2002.

IDENTITY CARDS - EMBOSSED ISO ISO/IEC 7811-1 2002 Identification cards - Recording technique - P.1: Embossing / By International Organization for


IMPACT TESTING CSBTS GB/T 12584 2001 Rubber or plastics coated fabrics - Low-temperature impact test / By China State Bureau of Quality and


INDEXING ISO ISO 4046-1 2002 Paper, board, pulps and related terms - Vocabulary - P.1: Alphabetical index / By International


INFORMATION EXCHANGE DSM MS 1536 P.3 2002 Information technology - Guidelines for the management of IT security - P.3: Techniques for the


By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.


MS 1537 2002 Information security management - Specification for information security management systems / ByDepartment of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.

INFORMATION TECHNOLOGY ISO ISO/IEC 9796-2 2002 Information technology - Security techniques - Digital signature schemes giving message recovery -

P.2: Integer factorization based mechanisms / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

INTEGRATED CIRCUITS IEC IEC 61967-6 2002 Integrated circuits - Measurement of electromagnetic emissions, 150kHz to 1 Ghz - P. 6: Measurement of

conducted emissions - Magnetic probe method / By International Electrotechnical Commission (IEC). Geneva: IEC; 2002.

INTERFACES (DATA PROCESSING) ISO ISO 14915-3 2002 Software ergonomics for multimedia user interfaces - P.3: Media selection and combination / By


IRONS IEC IEC 60335-2-44 2002 Household and similar electrical appliances - Safety - P.2-44: Particular requirements for ironers / By


IRRIGATION EQUIPMENT ISO ISO 15873 2002 Irrigation equipment - Differential pressure Venturi-type liquid additive injectors / By International


JEWELLERY CSBTS GB 11887 2002 Jewellery - Fineness of precious metal alloys and designation / By China State Bureau of Quality and



LABELLING DSM MS 1513 P.5 Sub-P.2 2001 Packaging - Transport of dangerous goods - P.5: Consignment procedures - Sub-P.2: Marking,

labelling and placarding / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

LAMP CAPS IEC IEC 60399 2002 Standard sheets for barrel thread for E14 and E27 Lamp holders with shade holder ring / By International

Electrotechnical Commission (IEC). Geneva: IEC, 2002.LAWN-MOWERS IEC IEC 60335-2-77 2002 Household and similar electrical appliances - Safety - P.2-77: Particular requirements for pedestrian

controlled mains-operated lawnmowers / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

LIFTING EQUIPMENT DSM MS 1544 P.1 2002 Cranes - Safe use - P.1: General / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM,

2002.

LIGHTING SYSTEMS IEC IEC 61822 2002 Electrical installations for lighting and beaconing of aerodromes - Constant current regulators / By

International Electrotechnical Commission (IEC). Geneva: IEC, 2002.LIME SABS SABS 523 2002 Limes for use in building / By South African Bureau of Standards (SABS). 2.1 ed. - - Pretoria: SABS,

2002.LIQUEFIED PETROLEUM GAS DSM MS 1535 P.1 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.1: Specification / By



MS 1535 P.2 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.2: General construction / ByDepartment of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.

MS 1535 P.3 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.3: Test methods / ByDepartment of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.

MS 1535 P.4 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.4: Glossar / By Departmentof Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.

LIQUID COOLING SYSTEMS IEC IEC 60974-2 2002 Arc welding equipment - P.2: Liquid cooling systems / By International Electrotechnical Commission


MAGNETIC MATERIALS IEC IEC 60404-14 2002 Magnetic materials - P.14: Methods of measurement of the magnetic dipole moment of a ferromagnetic

material specimen by the withdrawal or rotation method / By International Electrotechnical Commission (IEC). Geneva: IEC;2002.

MANAGEMENT TECHNIQUES DSM MS 1536 P.3 2002 Information technology - Guidelines for the management of IT security - P.3: Techniques for the


By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. MS 1537 2002 Information security management - Specification for information security management systems / By

Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. IEC IEC 82045-1 2001 Document management - P.1: Principles and methods / By International Electrotechnical Commission

(IEC). Geneva: IEC, 2001. ISO ISO 15849 2001 Ships and marine technology - Guidelines for implementation of a fleet management system network / By



MEASURING INSTRUMENTS CSBTS GB/T 335 2002 Non-self-indicating instrument / By China State Bureau of Quality and Technical Supervision (CSBTS).

Beijing: CSBTS, 2002.

MECHANICAL TESTING CSBTS GB/T 228 2002 Metallic materials - Tensile testing at ambient temperature / By China State Bureau of Quality and

Technical Supervision (CSBTS). Beijing: CSBTS, 2002. ISO ISO 14577-1 2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - P.1: Test

method / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 14577-2 2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - P.2:

Verification and calibration of testing machines / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 14577-3 2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - P.3: Calibration

of reference blocks / By International Organization for Standardization (ISO). Geneva: ISO, 2002.METALS CSBTS GB/T 228 2002 Metallic materials - Tensile testing at ambient temperature / By China State Bureau of Quality and

Technical Supervision (CSBTS). Beijing: CSBTS, 2002. ISO ISO 14577-1 2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - P.1: Test

method / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 14577-2 2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - P.2:

Verification and calibration of testing machines / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 14577-3 2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - P.3: Calibration

of reference blocks / By International Organization for Standardization (ISO). Geneva: ISO, 2002.MILK ISO ISO 14673-1 2001 Milk and milk products - Determination of nitrate and nitrite contents - P.1: Method using cadmium

reduction and spectrometry / By International Organization for Standardization (ISO). Geneva: ISO, 2001.


ISO 14673-2 2001 Milk and milk products - Determination of nitrate and nitrite contents - P.2: Method using segmentedflow analysis (Routine method) / By International Organization for Standardization (ISO). Geneva: ISO, 2001.

ISO 14673-3 2001 Milk and milk products - Determination of nitrate and nitrite contents - P.3: Method using cadmiumreduction and flow injection analysis with in line dialysis (Routine method) / By International Organization for Standardization(ISO). Geneva: ISO, 2001.

MONITORS DSM MS 1538 2002 Speed monitoring device for road vehicles / By Department of Standards Malaysia (DSM). Selangor D.E.:

DSM, 2002.

MOTOR VEHICLES DSM MS 595 P.1 2002 Safety glass for motor vehicles - P.1: General requirements / By Department of Standards Malaysia

(DSM). 2nd ed. - - Selangor D.E.: DSM, 2002. SABS SABS 1080 2002 Restraining devices (safety belts) for occupants of adult build in motor vehicles (Revised requirements)

(Incorporating EEC Directive 77/541 "Safety belts and restraint systems of motor vehicles", and the amending EEC Directives81/576 and 82/319, with modifications) / By South African Bureau of Standards (SABS). Pretoria: SABS 2002.

NUCLEAR -ELECTTRIC POWER STATIONS CSBTS GB/T 13286 2001 Criteria for independence of class IE equipment and circuits in nuclear power plants / By China State

Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2001.

OILS DSM MS 1515 P.1 2001 Methods of sampling and test for palm glycerine - P.1: Sampling / By Department of Standards Malaysia

(DSM). Selangor D.E.: DSM, 2001. MS 817 P.7 S.1 2001 Methods of test for palm oil and palm oil products - P.7: Determination of unsaponifiable matter - S.1:

Method using diethyl ether extraction (Reference method) / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM,2001.


MS 817 P.7 S.2 2001 Methods of test for palm oil and palm oil products - P.7: Determination of unsaponifiable matter - S.2:Rapid method using hexane extraction / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

MS 817 P.8 S.1 2001 Methods of test for palm oil and palm oil products - P.8: Determination of triacylglycerol by gaschromatography - S.1: Triacylglycerol composition by carbon number / By Department of Standards Malaysia (DSM). SelangorD.E.: DSM, 2001.

OVERHEAD POWER LINES IEC IEC 60652 2002 Loading tests on overhead line structures / By International Electrotechnical Commission (IEC). 2nd ed. -

- Geneva: IEC; 2002.PACKAGING DSM MS 1513 P.1 Sub-P.1 2002 Packaging - Transport of dangerous goods - P.1: General provision, definitions and training -




Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.PAPER ISO ISO 4046-1 2002 Paper, board, pulps and related terms - Vocabulary - P.1: Alphabetical index / By International

Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 4046-4 2002 Paper, board, pulps and related terms - Vocabulary - P.4: Paper and board grades and converted products /

By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 4046-5 2002 Paper, board, pulps and related terms - Vocabulary - P.5: Properties of pulp, paper and board / By

International Organization for Standardization (ISO). Geneva: ISO, 2002.PAPER PRODUCTS ISO ISO 4046-4 2002 Paper, board, pulps and related terms - Vocabulary - P.4: Paper and board grades and converted products /

By International Organization for Standardization (ISO). Geneva: ISO, 2002.


PAPER PULP ISO ISO 4046-1 2002 Paper, board, pulps and related terms - Vocabulary - P.1: Alphabetical index / By International

Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 4046-2 2002 Paper, board, pulps and related terms - Vocabulary - P.2: Pulping terminology / By International

Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 4046-5 2002 Paper, board, pulps and related terms - Vocabulary - P.5: Properties of pulp, paper and board / By

International Organization for Standardization (ISO). Geneva: ISO, 2002.PAPER-MAKING MACHINES ISO ISO 4046-3 2002 Paper, board, pulps and related terms - Vocabulary - P.3: Paper-making terminology / By International

Organization for Standardization (ISO). Geneva: ISO, 2002.PASSENGER TRANSPORT SLSI SLS 1212 2001 Passenger car tyres / By Sri Lanka Standards Institution (SLSI). Colombo: SLSI, 2001.PERFORMANCE TESTING DSM MS 1539 P.1 2002 Portable fire extinguishers - P.1: Construction and testing methodology / By Department of Standards

Malaysia (DSM). Selangor D.E.: DSM, 2002. IEC IEC 60746-3 2002 Expression of performance of electrochemical analyzers - P.3: Electrolytic conductivity / By

International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC; 2002.PEST CONTROL IEC IEC 60335-2-59 2002 Household and similar electrical appliances - Safety - P.2-59: Particular requirements for insect killers

/ By International Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2002.PIEZOELECTRIC DEVICES IEC IEC 60122-1 2002 Quartz crystal units of assessed quality - P.1: Generic specification / By International Electrotechnical

Commission (IEC). 3rd ed. - - Geneva: IEC, 2002.


PIPETTES ISO ISO 8655-2 2002 Piston-operated volumetric apparatus - P.2: Piston pipettes / By International Organization for


PLASTICS ISO ISO 10366-1 2002 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials

- P.1: Designation system and basis for specifications / By International Organization for Standardization (ISO). 2nd ed. - -Geneva: ISO, 2002.

ISO 17422 2002 Plastics - Environmental aspects - General guidelines for their inclusion in standards / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

ISO 6402-1 2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS)and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - P.1: Designation system and basisfor specifications / By International Organization for Standardization (ISO). 4th ed. - - Geneva: ISO, 2002.

PLASTICS AND RUBBER TECHNOLOGY ISO ISO 1382 2002 Rubber - Vocabulary / By International Organization for Standardization (ISO). 4th ed. - - Geneva: ISO;

2002.POLYETHYLENE ISO ISO 13953 2001 Polyethylene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces

from a butt-fused joint / By International Organization for Standardization (ISO). Geneva: ISO, 2001.POTABLE WATER DSM MS 1551 2002 Soda ash (sodium carbonate) used for potable water supply / By Department of Standards Malaysia (DSM).

Selangor D.E.: DSM, 2002.POWER TRANSMISSION SYSTEMS IEC IEC 61477 2001 Live working - Minimum requirements for the utilization of tools, devices and equipment / By

International Electrotechnical Commission (IEC). Geneva: IEC; 2002.


PRINTING INKS ISO ISO 2846-3 2002 Graphic technology - Colour and transparency of printing ink sets for four-colour-printing - P.3:

Publication gravure printing / By International Organization for Standardization (ISO). Geneva: ISO; 2002.

PROJECTORS (IMAGE) IEC IEC 60335-2-56 2002 Household and similar electrical appliances - Safety - P.2-56: Particular requirements for projectors

and similar appliances / By International Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2002.

PROPERTIES ISO ISO 4046-5 2002 Paper, board, pulps and related terms - Vocabulary - P.5: Properties of pulp, paper and board / By


PROTECTIVE CLOTHING IEC IEC 60895 2002 Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and +; 600 kV d.c. / By

International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.QUALITY ASSURANCE ISO ISO 19011 2002 Guidelines for quality and/or environmental management systems auditing / By International Organization

for Standardization (ISO). Geneva: ISO, 2002.QUALITY ASSURANCE SYSTEMS - DIRECTORIES ISO ISO 05-7857 2002 ISO directory of ISO 9000 and ISO 14000 accreditation and certification bodies / By International

Organization for Standardization (ISO). 6th ed. - - Geneva: ISO, 2002.QUALITY AUDITING ISO ISO 19011 2002 Guidelines for quality and/or environmental management systems auditing / By International Organization

for Standardization (ISO). Geneva: ISO, 2002.


QUALITY CONTROL DSM MS 1533 2002 Recommended practices in monitoring electric power quality / By Department of Standards Malaysia

(DSM). Selangor D.E.: DSM, 2002. ISO ISO 19011 2002 Guidelines for quality and/or environmental management systems auditing / By International Organization

for Standardization (ISO). Geneva: ISO, 2002.RADIO DISTURBANCES IEC IEC 61000-2-4 2002 Electromagnetic compatibility (EMC) - P.2-4: Environment - Compatibility levels in industrial plants

for low-frequency conducted disturbances / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC; 2002.RAILWAY CONTROL SYSTEMS IEC IEC 62279 2002 Railway applications - Communications, signalling and processing systems - Software for railway control

and protection systems / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.RAILWAY VEHICLES IEC IEC 60349-2 2002 Electric traction - Rotating electrical machines for rail and road vehicles - P.2: Electronic convertor-fed

alternating current motors / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002. IEC 60494-2 2002 Railway applications - Rolling stock - Pantographs - Characteristics and tests - P.2: Pantographs for

metros and light rail vehicles / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 62278 2002 Railway applications - Specification and demonstration of reliability availability, maintainability and safety

(RAMS) / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

RECORDING SYSTEMS IEC IEC 60050-808 2002 International Electrotechnical Vocabulary - P.808: Video cameras for non-broadcasting / By

International Electrotechnical Commission (IEC). Geneva: IEC 2002. ISO ISO/IEC 7811-1 2002 Identification cards - Recording technique - P.1: Embossing / By International Organization for



REMOTE CONTROL SYSTEMS IEC IEC/TR 60870-6-505 2002 Telecontrol equipment and systems - P.6-505: Telecontrol protocols compatible with ISO

standards and ITU-T recommendations - TASE.2 User guide / By International Electrotechnical Commission (IEC). Geneva:IEC, 2002.

ROAD VEHICLE COMPONENTS DSM MS 1538 2002 Speed monitoring device for road vehicles / By Department of Standards Malaysia (DSM). Selangor D.E.:

DSM, 2002.

ROAD VEHICLES DSM MS 1538 2002 Speed monitoring device for road vehicles / By Department of Standards Malaysia (DSM). Selangor D.E.:

DSM, 2002. IEC IEC 60349-2 2002 Electric traction - Rotating electrical machines for rail and road vehicles - P.2: Electronic convertor-fed

alternating current motors / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002. ISO ISO 15501-1 2001 Road vehicles - Compressed natural gas (CNG) fuel systems - P.1: Safety requirements / By


ROTATING ELECTRIC MACHINES IEC IEC 60349-2 2002 Electric traction - Rotating electrical machines for rail and road vehicles - P.2: Electronic convertor-fed

alternating current motors / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

RUBBER ISO ISO 1382 2002 Rubber - Vocabulary / By International Organization for Standardization (ISO). 4th ed. - - Geneva: ISO;

2002.


SAFETY GLASS DSM MS 595 P.1 2002 Safety glass for motor vehicles - P.1: General requirements / By Department of Standards Malaysia

(DSM). 2nd ed. - - Selangor D.E.: DSM, 2002.

SAFETY HARNESSES SABS SABS 1080 2002 Restraining devices (safety belts) for occupants of adult build in motor vehicles (Revised requirements)

(Incorporating EEC Directive 77/541 "Safety belts and restraint systems of motor vehicles", and the amending EEC Directives81/576 and 82/319, with modifications) / By South African Bureau of Standards (SABS). Pretoria: SABS 2002.

SAFETY MEASURES CSBTS GB/T 13286 2001 Criteria for independence of class IE equipment and circuits in nuclear power plants / By China State

Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2001. IEC IEC 60335-2-10 2002 Household and similar electrical appliances - Safety - P.2-10: Particular requirements for floor


IEC 60335-2-13 2002 Household and similar electrical appliances - Safety - P.2-13: Particular requirements for deep fatfryers, frying pans and similar appliances / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva: IEC, 2002.

IEC 60335-2-17 2002 Household and similar electrical appliances - Safety - P.2-17: Particular requirements for blankets,pads and similar flexible heating appliances / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC,2002.


IEC 60335-2-37 2002 Household and similar electrical appliances - Safety - P.2-37: Particular requirements for commercialelectric deep fat fryers / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva: IEC, 2002.

IEC 60335-2-44 2002 Household and similar electrical appliances - Safety - P.2-44: Particular requirements for ironers / ByInternational Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2002.


IEC 60335-2-56 2002 Household and similar electrical appliances - Safety - P.2-56: Particular requirements for projectorsand similar appliances / By International Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2002.

IEC 60335-2-77 2002 Household and similar electrical appliances - Safety - P.2-77: Particular requirements for pedestriancontrolled mains-operated lawnmowers / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 60335-2-8 2002 Household and similar electrical appliances - Safety - P.2-8: Particular requirements for shavers, hairclippers and similar appliances / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva: IEC, 2002.

IEC 60335-2-80 2002 Household and similar electrical appliances - Safety - P.2-80: Particular requirements for fans / ByInternational Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 60601-2-4 2002 Medical electrical equipment - P.2-4: Particular requirements for the safety of cardiac defibrillators /By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

SAMPLING ISO ISO 6257 2002 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Sampling / By

International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

SANDERS IEC IEC 60745-2-4 2002 Hand-held motor-operated electric tools - Safety - P.2-4: Particular requirements for sanders and

polishers other than disk type / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.SANITARY APPLIANCES DSM MS 795 2002 WC flushing cisterns and flush pipes / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM,

2002.SEAT BELTS DSM MS 75 2002 Anchorages for seat belts / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.

SECURITY TECHNIQUES ISO ISO/IEC 9796-2 2002 Information technology - Security techniques - Digital signature schemes giving message recovery -

P.2: Integer factorization based mechanisms / By International Organization for Standardization (ISO). Geneva: ISO, 2002.


SODIUM CARBONATE DSM MS 1551 2002 Soda ash (sodium carbonate) used for potable water supply / By Department of Standards Malaysia (DSM).

Selangor D.E.: DSM, 2002.SOILS - QUALITY ISO ISO 15176 2002 Soil quality - Characterization of excavated soil and other soil materials intended for re-use / By


SOLDERLESS CONNECTORS IEC IEC 60352-7 2002 Solderless connections - P.7: Spring clamp connections - General requirements, test methods and

practical guidance / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

SPACE TECHNOLOGY ISO ISO 14961 2002 Space data and information transfer systems - Parameter value language specification / By International

Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

STEAM TURBINES IEC IEC/TS 61370 2002 Steam turbines - Steam purity / By International Electrotechnical Commission (IEC). Geneva: IEC,

2002.

STEEL -WIRE ROPES CSBTS GB/T 12753 2002 Steel wire ropes for conveyer belts / By China State Bureau of Quality and Technical Supervision


SUITCASES SABS SABS 1392 2002 Soft-top suitcases / By South African Bureau of Standards (SABS). Pretoria: SABS, 2002.


SURGE PROTECTION IEC IEC/TR 62066 2002 Surge overvoltages and surge protection in low-voltage a.c. power systems - General basic information

/ By International Electrotechnical Commission (IEC). Geneva: IEC; 2002.

SWITCHES IEC IEC 60669-2-1 2002 Switches for household and similar fixed electrical installations - P.2-1: Particular requirements -

Electronic switches / By International Electrotechnical Commission (IEC). 4th ed. - - Geneva: IEC, 2002.

TABLEWARE SABS SABS 1003 2002 Fine china and vitrified tableware for domestic use / By South African Bureau of Standards (SABS). 2nd

ed. - - Pretoria: SABS, 2002. SABS 1004 2002 Fine china and vitrified tableware for non-domestic use / By South African Bureau of Standards (SABS).

2nd ed. - - Pretoria: SABS, 2002.

TELEMETRY IEC IEC/TR 60870-6-505 2002 Telecontrol equipment and systems - P.6-505: Telecontrol protocols compatible with ISO

standards and ITU-T recommendations - TASE.2 User guide / By International Electrotechnical Commission (IEC). Geneva:IEC, 2002.

TELEPHONE NETWORKS ISO ISO/IEC 18017 2001 Information technology - Telecommunications and information exchange between systems - Private

Integrated Services Network - Mapping functions for the employment of Virtual Private Network scenarios / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2001.

TERMINOLOGY ISO ISO 4046-2 2002 Paper, board, pulps and related terms - Vocabulary - P.2: Pulping terminology / By International



ISO 4046-3 2002 Paper, board, pulps and related terms - Vocabulary - P.3: Paper-making terminology / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

ISO 8655-1 2002 Piston-operated volumetric apparatus - P.1: Terminology, general requirements and user recommendations/ By International Organization for Standardization (ISO). Geneva: ISO, 2002.

TESTING DSM MS 1535 P.3 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.3: Test methods / By

Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. MS 817 P.7 S.1 2001 Methods of test for palm oil and palm oil products - P.7: Determination of unsaponifiable matter - S.1:




IEC IEC 60331-31 2002 Tests for electric cables under fire conditions - Circuit integrity - P.31: Procedures and requirements for


IEC 60352-7 2002 Solderless connections - P.7: Spring clamp connections - General requirements, test methods andpractical guidance / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 60664-1 2002 Insulation coordination for equipment within low-voltage systems - P.1: Principles, requirements andtests / By International Electrotechnical Commission (IEC). Geneva: IEC; 2002.

TILES BSI BS EN 12004 2001 Adhesives for tiles - Definitions and specifications / By British Standards Institution (BSI). London:

BSI, 2001.


TRACTION-CURRENT-COLLECTING DEVICES IEC IEC 60494-2 2002 Railway applications - Rolling stock - Pantographs - Characteristics and tests - P.2: Pantographs for

metros and light rail vehicles / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

TRANSPORTATION DSM MS 1513 P.1 Sub-P.1 2002 Packaging - Transport of dangerous goods - P.1: General provision, definitions and training -




Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. ISO ISO 15622 2002 Transport information and control systems - Adaptive cruise control systems - Performance requirements

and test procedures / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 15623 2002 Transport information and control systems - Forward vehicle collision warning systems - Performance

requirements and test procedures / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

TYRES CSBTS GB/T 1190 2001 Technical specification of earth-mover tyres / By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing: CSBTS, 2001. SLSI SLS 1212 2001 Passenger car tyres / By Sri Lanka Standards Institution (SLSI). Colombo: SLSI, 2001.

UMBRELLAS SLSI SLS 1207 P.2 2001 Umbrella - P.2: Folding umbrella / By Sri Lanka Standards Institution (SLSI). Colombo: SLSI, 2001.


VEGETABLE OILS DSM MS 1515 P.1 2001 Methods of sampling and test for palm glycerine - P.1: Sampling / By Department of Standards Malaysia

(DSM). Selangor D.E.: DSM, 2001. MS 817 P.7 S.1 2001 Methods of test for palm oil and palm oil products - P.7: Determination of unsaponifiable matter - S.1:




VEHICLE REFLECTORS DSM MS 654 2002 Reflex reflectors for vehicles including cycles / By Department of Standards Malaysia (DSM). Selangor

D.E.: DSM, 2002.

VELCOCITY MANAGEMENT DSM MS 1538 2002 Speed monitoring device for road vehicles / By Department of Standards Malaysia (DSM). Selangor D.E.:

DSM, 2002.

VIDEO RECORDERS IEC IEC 61880-2 2002 Video systems (525/60) - Video and accompanied data using the vertical blanking interval - c- P.2: 525

progressive scan system / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

VIDEO RECORDING IEC. IEC 60050-808 2002 International Electrotechnical Vocabulary - P.808: Video cameras for non-broadcasting / By

International Electrotechnical Commission (IEC). Geneva: IEC 2002.


VITRIFIED CHINA SABS SABS 1003 2002 Fine china and vitrified tableware for domestic use / By South African Bureau of Standards (SABS). 2nd

ed. - - Pretoria: SABS, 2002. SABS 1004 2002 Fine china and vitrified tableware for non-domestic use / By South African Bureau of Standards (SABS).

2nd ed. - - Pretoria: SABS, 2002.

VOCABULARY DSM MS 1535 P.4 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.4: Glossary / By Department

of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. IEC IEC 60050-131 2002 International Electrotechnical Vocabulary - P.131: Circuit theory / By International Electrotechnical

Commission (IEC). 2nd ed. - - Geneva: IEC, 2002. IEC 60050-808 2002 International Electrotechnical Vocabulary - P.808: Video cameras for non-broadcasting / By

International Electrotechnical Commission (IEC). Geneva: IEC 2002. ISO ISO 1382 2002 Rubber - Vocabulary / By International Organization for Standardization (ISO). 4th ed. - - Geneva: ISO;

2002. ISO 4046-1 2002 Paper, board, pulps and related terms - Vocabulary - P.1: Alphabetical index / By International

Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 4046-4 2002 Paper, board, pulps and related terms - Vocabulary - P.4: Paper and board grades and converted products /

By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 4046-5 2002 Paper, board, pulps and related terms - Vocabulary - P.5: Properties of pulp, paper and board / By


VOLATILE MATTER DETERMINATION CSBTS GB/T 12585 2001 Rubber, vulcanized or thermoplastic - Rubber sheet and rubber-coated fabric - Determination rate of



VOLUME MEASUREMENT ISO ISO 8655-1 2002 Piston-operated volumetric apparatus - P.1: Terminology, general requirements and user recommendations

/ By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 8655-2 2002 Piston-operated volumetric apparatus - P.2: Piston pipettes / By International Organization for

Standardization (ISO). Geneva: ISO, 2002. ISO 8655-3 2002 Piston-operated volumetric apparatus - P.3: Piston burettes / By International Organization for

Standardization (ISO). Geneva: ISO, 2002. ISO 8655-4 2002 Piston-operated volumetric apparatus - P.4: Dilutors / By International Organization for Standardization

(ISO). Geneva: ISO, 2002. ISO 8655-5 2002 Piston-operated volumetric apparatus - P.5: Dispensers / By International Organization for

Standardization (ISO). Geneva: ISO, 2002. ISO 8655-6 2002 Piston-operated volumetric apparatus - P.6: Gravimetric methods for the determination of measurement

error / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

VULCANIZED RUBBER CSBTS GB/T 12585 2001 Rubber, vulcanized or thermoplastic - Rubber sheet and rubber-coated fabric - Determination rate of


WARNING DEVICES ISO ISO/TS 13475-2 2000 Acoustics - Stationary audible warning devices used outdoors - P.2: Precision methods for

determination of sound emission quantities / By International Organization for Standardization (ISO). Geneva : ISO, 2000.

WATER DISTRIBUTION ISO

ISO 11545 2001 Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer orsprinkler nozzles - Determination of uniformity of water distribution / By International Organization for Standardization (ISO). 2nded. - - Geneva : ISO, 2001.


WELDERS ISO ISO 15618-1 2001 Qualification testing of welders for underwater welding - P.1: Diver-welders for hyperbaric wet welding

/ By International Organization for Standardization (ISO). Geneva : ISO ; 2001. ISO 15618-2 2001 Qualification testing of welders for underwater welding - P.2: Diver-welders and welding operators for

hyperbaric dry welding / By International Organization for Standardization (ISO). Geneva : ISO ; 2001.

WELDING ISO ISO 15618-1 2001 Qualification testing of welders for underwater welding - P.1: Diver-welders for hyperbaric wet welding

/ By International Organization for Standardization (ISO). Geneva : ISO ; 2001. ISO 15618-2 2001 Qualification testing of welders for underwater welding - P.2: Diver-welders and welding operators for

hyperbaric dry welding / By International Organization for Standardization (ISO). Geneva : ISO ; 2001.

WIND LOADING DSM MS 1553 2002 Code of practice on wind loading for building structure / By Department of Standards Malaysia (DSM).

Selangor D.E.: DSM, 2002.

WIRE ROPES ISO ISO 9736 2000 Aerospace - Eye-ends, in steel, threaded, for aircraft control wire rope - Dimensions and loads / By

International Organization for Standardization (ISO). Geneva : ISO, 2000. ISO 9737 2000 Aerospace - Eye-ends, in corrosion - resistant steel, swaged on aircraft control wire rope - Dimensions and

loads / By International Organization for Standardization (ISO). Geneva : ISO, 2000. ISO 9738 2000 Aerospace - Turnbarrels, for aircraft control wire rope - Dimensions and loads / By International

Organization for Standardization (ISO). Geneva : ISO, 2000. ISO 9747 2000 Aerospace - Double-shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -

Dimensions and loads / By International Organization for Standardization (ISO). Geneva : ISO, 2000. ISO 9748 2000 Aerospace - Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and

loads / By International Organization for Standardization (ISO). Geneva : ISO, 2000.


ISO 9749 2000 Aerospace - Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions andloads / By International Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO 9759 2000 Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions andloads / By International Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO 9760 2000 Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings- Dimensions and loads / By International Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO 9761 2000 Aerospace - Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles -Dimensions / By International Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO 9762 2000 Aerospace - Aircraft control wire rope assemblies - Dimensions and end-fitting combinations / ByInternational Organization for Standardization (ISO). Geneva : ISO, 2000.

ISO 9763 1999 Aerospace - Aircraft control wire rope assemblies - Technical specification / By International Organizationfor Standardization (ISO). Geneva : ISO, 1999.

WORK STATIONS ISO ISO 14738 2002 Safety of machinery - Anthropometric requirements for the design of workstations at machiner / By


WOVEN FABRICS SLSI SLS 369 2001 Polyester cotton/rayon shirting materials / By Sri Lanka Standards Institution (SLSI). Colombo: SLSI, 2001.

YARN SLSI,. SLS 137 P.1 2000 Grey cotton yarn - P.1: For Powerloom / By Sri Lanka Standards Institution (SLSI). 2nd ed. - -

Colombo: SLSI, 2000.

YIELD-POINT DETERMINATION CSBTS GB/T 11957 2001 Determination of yield of humic acids in coal / By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing CSBTS, 2001.


Alphabetical Subject Index

PageAccess 1Acoustic measurement 1Acoustic signals 1Acoustic testing 1Acoustics 1Acrylonitrile butadiene styrene 2Adhesion tests 2Adhesive-bonded joints 2Adhesives 2Agricultural equipment 3Aids for the disabled 3Aircraft 3Aircraft components 5Aircraft controls 5Aluminium 5Analogue signals 5Animal feed 6Arc-welding equipment 6Automatic control systems 6Banking 6Blankets 6Board (paper) 6Buildings 7


Burettes 7Cameras 7Ceramics 7Cereals 7Classification systems 8Cleaning equipment 8Clocks 8Cloth 8Coal 8Coated fabrics 9Communication cables 9Communication procedures 9Comparators 9Compressors 9Computer networks 9Construction systems 10Control systems 10Conveyor belts 10Cooking appliances 10Cork 11Corrosion-resistant steels 11Corrugated 11Cotton 11Cranes 12Dairy products 12Dangerous materials 12


Data processing 13Data transfer 13Defibrillators 13Designations 13Determination of content 13Diagnosis (medical) 14

Dilutors 14Dimensional changes 14Disabled people 14Dispensers 14Dosimeter 15Electric cables 155Electric conductors 15Electric connectors 15Electric control equipment 15Electric fences 15Electric furnaces 16Electric motors 16Electric plugs 16Electric power stations 16Electric power systems 16Electric substations 16Electrical conductivity 17Electrical equipment 17Electrical household appliances 17Electrical installations 19


Electrical insulating materials 19Electrical insulation 19Electrical medical equipment 19Electrical protection equipment 19Electrochemical devices 20Electromagnetic compatibility (EMC) 20Electromagnetism 20Energy sources 20Engine components 20Engineering drawings 20Environmental management 20Environmental testing 21Equipment safety 21Ergonomics 21Explosive atmospheres 21Fans 21Fineness 21Fire extinguishers 22Fire risks 22Floor cleaning equipment 22Fluorine 22Flushing cisterns 22Frying pans 22Gardening equipment 23Graphic symbols 23Graphic technology 23


Gravimetric analysis 23Hand tools 23Hearing aids 23Heaters 23Household equipment 23Hydraulic transmission systems 24Identity cards 24Identity cards - Embossed 24Impact testing 24Information exchange 24Information technology 25Integrated circuits 25Interfaces (data processing) 25Irons 25Irrigation equipment 25Jewellery 25Labelling 26Lamp caps 26Lawn-mowers 26Lifting equipment 26Lighting systems 26Lime 26Liquefied petroleum gas 26Liquid cooling systems 27Magnetic materials 27Management techniques 27


Measuring instruments 28Mechanical testing 28Metals 28Milk 28Monitors 29Motor vehicles 29Musical instruments 29Nuclear -electric power stations 29Oils 29Overhead power lines 30Packaging 30Paper 30Paper products 30Paper pulp 31Paper-making machines 31Passenger transport 31Performance testing 31Pest control 31Piezoelectric devices 31Pipettes 32Plastics 32Plastics and rubber technology 32Polyethylene 32Potable water 32Power transmission systems 32Printing inks 33


Projectors (image) 33Properties 33Protective clothing 33Quality assurance 33Quality auditing 33Quality control 34Radio disturbances 34Railway control systems 34Railway vehicles 34Recording systems 34Remote control systems 35Road vehicle components 35Road vehicles 35Rotating electric machines 35Rubber 35Safety glass 36Safety harnesses 36Safety measures 36Sampling 37Sanders 37Sanitary appliances 37Seat belts 37Security techniques 37Sodium carbonate 38Soils - Quality 38Solderless connectors 38


Space technology 38Steam turbines 38Steel-wire ropes 38Suitcases 38Surge protection 39Switches 39Tableware 39Telemetry 39Telephone networks 39Terminology 39Testing 40Testing conditions 40Tiles 40Traction-current-collecting devices 41Transportation 41Tyres 41Umbrellas 41Vegetable oils 42Vehicle reflectors 42Velocity management 42Video recorders 42Video recording 42Vitrified china 43Vocabulary 43Volatile matter determination 43Volume measurement 44


Vulcanized rubber 44Warning devices 44Water distribution 44Welders 45Welding 45Wind loading 45Wire ropes 45Work stations 46Woven fabrics 46Yarn 46Yield-point determination 46


How to place your order

Thai Industrial Standards Institute (TISI), the national standards body of Thailand, has beenparticipating as member body of ISO. TISI is sales agents for ISO and another member bodies standards inThailand.

Orders for ISO and another member bodies standards should preferable be addressed to

Director for International Relations,Thai Industrial Standards Institute (TISI)

Rama 6 Road, Ratchathewi, Bangkok, 10400Tel: 0 2202 3502Fax: 0 2247 8741

E-mail: [email protected]


รายชื่อสมาชิกองคการระหวางประเทศวาดวยการมาตรฐาน

(International Organization for Standardization – ISO) และ

คณะกรรมาธิการวาดวยไฟฟาและอิเล็กทรอเทคนิกส(International Electrotechnical Commission)

Algeria Institut algerien de normalisation et de propriete industrielle (INAPI)Argentina Instituto Argentino de Normalizaci๓n

www.iram.com.arAustralia Standards Australia International Ltd.

www.standards.com.auAustralian National Committee of the IEC

Austria Austrian Standards Institutewww.on-norm.atAustrian Electrotechnical Committee

Bangladesh Bangladesh Standards and Testing InstituteBelgium The Belgian Institution for Standardization

Comit Electrotechnique BelgeBolivia Instituto Boliviano de Normalizacion y CalidadBosnia and Herzegovina Institute for Standardization, Metrology and Patents of Bosnia and

Herzegovinawww.bih.net.ba/-zsmp

Brazil Associacao Brasileira de Normas TecnicasBrazilian National Committee of the IECwww.abnt.org.br

Canada Standards Council of


www.scc.caCanadian National Committee of the IEC

Chile Instituto Nacional de Normalizacionwww.inn.cl

China China State Bureau of Quality and Technical Supervisionwww.csbts..cn.netChinese National Committee of the IEC

Colombia Instituto Colombiano de Normas Tecnicas y Certificacionwww.icontec.org.co

Costa Rica Instituto de Normas Tecnicas de Costa Ricawww.webspawner.com/users/inteco

Croatia State Office for Standardization and Metrologywww.dznm.hr

Czech Republic Czech Standards Institutewww.csni.cz

Denmark Dansk Standardwww.ds.dk/

Ecuador Instituto Ecuatoriano de Normalizaci๓nwww.ecua.net.ec/inen/

El Salvador Consejo Nacional de Ciencia y TecnologํaFinland Finnish Standards Association

www.sfs.fiFinnish Electrotechnical Standards Association

France Association francaise de normalisationwww.afnor.frUnion Technique de l'Electricit


Germany Deutsches Institut fur Normungwww.din.deDeutsches Komitee der IEC

Greece Hellenic Organization for Standardizationwww.elot.gr

Hong Kong, China Innovation and Technology CommissionHungary Magyar Szabvnygyi Testlet

www.mszt.huIceland Icelandic Council for Standardization

www.stri.isIEC National Committee of Iceland

India Bureau of Indian Standardswww.del.vsnl.net.in/bis.org

Indonesia Badan Standardisasi Nasionalwww.bsn.or.id

Iran, Islamic Republic of Institute of Standards and Industrial Research of Iranwww.isiri.org

Ireland National Standards Authority of Irelandwww.nsai.ieElectro-Technical Council of Ireland

Israel The Standards Institution of Israelwww.sii.org.il

Italy Ente Nazionale Italiano di Unificazione (UNI)www.uni.comComitato Elettrotecnico Italiano

Japan Japan Industrial Standards Committee


www.jisc.orgKenya Kenya Bureau of Standards

www.kebs.orgKorea, Republic of Korean Agency for Technology and Standards

Korean National Committee of IECwww.ats.go.kr

Kyrgyzstan State Inspection for Standardization and MetrologyLatvia Latvian StandardLithuania Lithuanian Standards BoardLuxembourg Service de l'Energie de l'Etat, Organisme Luxembourgeois de

Normalisationwww.etat.lu/see Comit National CEI du Luxembourg

Malaysia Department of Standards Malaysiawww.dsm.gov.myMalaysian National Committee of the IEC

Malta Malta Standards Authoritywww.msa.org.mtIEC Maltese National Committee

Mexico Direcci๓n General de Normaswww.secofi.gob.mx/normas/home.html

Moldova, Republic of Department of Standards, Metrology and Technical SupervisionMorocco Service de normalisation industrielle marocaineNetherlands Nederlands Normalisatie-Instituut

www.nel.nlNetherlands National Committee of the IEC


New Zealand Standards New Zealandwww.standards.co.nzNew Zealand Electrotechnical Committee

Norway Norges Standardiseringsforbundwww.standard.noNorsk Electroteknisk Komite

Oman Directorate General for Specifications and MeasurementsPeru Instituto Nacional de Defensa de la Competencia y de la Protecci๓n

de la Propiedad IntelectualPhilippines Bureau of Product Standards

www.dti.gov.ph/bpsPoland Polish Committee for Standardization

www.pkn.plPolish National Committee of the IEC

Portugal Instituto Portugus da Qualidadewww.ipq.pt/Portuguese National Committee of the IEC

Russian Federation State Committee of the Russian Federation for Standardization,Metrology and Certificationwww.gost.ruRussian Federation Committee for the IEC

Saudi Arabia Saudi Arabian Standards Organizationwww.saso.org.saSaudi Arabian National Committee of the IEC

Singapore Singapore Productivity and Standards Boardwww.psb.gov.sg


Singapore National Committee of the IECSlovakia Slovak Institute for Standardization

www.sutn.gov.skSlovak Electrotechnical Committee (SEV)

Slovenia Standards and Metrology Institutewww.usm.mzt.si/Slovenian IEC National Committee

South Africa South African Bureau of Standardswww.sabs.co.za/South African National Committee of the IEC

Spain Asociaci๓n Espa๑ola de Normalizaci๓n y Certificacionwww.aenor.esComite Nacional Espanol de la CEI

Sri Lanka Sri Lanka Standards Institution www.nsf.ac.lk/slsi/Sweden Standardiseringen i Sverige

www.sis.seSvenska Elektriska Kommissionen

Switzerland Swiss Association for Standardizationwww.snv.chSwiss Electrotechnical Committee

Thailand Thai Industrial Standards Institutewww.tisi.go.thThai National Committee of the IEC

Trinidad and Tobago Trinidad and Tobago Bureau of Standardswww.opus.co.tt/ttbs/

Turkey Turk Standardlari Enstitusu


www.tse.org.trTurkish National Committee of the IEC

Uganda Uganda National Bureau of Standardswww.unbs.org

United Arab Emirates Directorate of Standardization and Metrologywww.uae.gov.ae

United Kingdom British Standards Institutionwww.bsi-global.comBritish Electrotechnical Committee

United States American National Standards InstituteU.S. National Committee of the IECwww.ansi.org

Uruguay Instituto Uruguayo de Normas Tecnicaswww.unit.org.uy

Venezuela Fondo para la Normalizacion y Certificacion de la Calidadwww.fondonorma.org.ve

Viet Nam Directorate for Standards and Qualitywww.tcvn.gov.vn

tisi library accession lists december 2002-january...

Documents