troubleshooting for the non-technician
DESCRIPTION
Troubleshooting for the Non-technician. Module Objectives. Identify common symptoms and problems associated with computer malfunctions. Isolate the source of problem through basic troubleshooting techniques. Identify care and service techniques and common problems with primary printer types. - PowerPoint PPT PresentationTRANSCRIPT
TroubleshootingTroubleshootingfor thefor the
Non-technicianNon-technician
Module ObjectivesModule Objectives
Identify common symptoms and problems associated with computer malfunctions.
Isolate the source of problem through basic troubleshooting techniques.
Identify care and service techniques and common problems with primary printer types.
Develop a preventive maintenance schedule for the computers in your classroom.
Essential QuestionsEssential Questions
How have technical problems in the classroom limited your ability to teach with technology?
Is it appropriate to troubleshoot technical problems during class time?
Have you established a maintenance schedule for the computers in your classroom?
Are your students involved?
Basic Troubleshooting Basic Troubleshooting MethodologyMethodology
Zero in on an area. Build a foundation. Work up to the problem. Repair/Replace.
Zero InZero In BuildFoundation
BuildFoundation
Work up toProblem
Work up toProblem
Repair/ReplaceRepair/Replace
The Dirty DozenThe Dirty Dozen
1. Power
2. Connectivity
3. Boot Firmware
4. Memory Chips
5. Storage
6. I/O
The Dirty Dozen The Dirty Dozen (cont’d)(cont’d)
7. Operating System
8. Device Drivers/TSRs
9. Memory Management
10. Application Specific
11. Configure/Setup
12. Viruses
PowerPower
The aspects that get electrical service to the devices that need them.
What is under Power?What is under Power?
Electric company Fuse box Wiring Plugs/Cords Power supply Connections to
devices
The CluesThe Clues
Dead PC Intermittent errors Intermittent lockups Device not working/
not found
ConnectivityConnectivity
The aspects that physically connects internal components and peripheral devices and allows for communication within a computer system.
What is under What is under Connectivity?Connectivity?
External cables Internal cables Properly seated cards Properly seated memory
chips and boards
ConnectivityConnectivity
Electronic signals are sent from devices installed on a computer through internal and external cables .
External cables connect peripheral devices via a PORT.
ConnectivityConnectivity
Both the keyboard and mouse are connected directly to a computer system’s motherboard.
Connectivity PortsConnectivity Ports
A PORT is similar to a telephone jack. It allows for two communication between a peripheral device and computer system.
Different types of PORTS are used to connect various peripheral devices: Parallel ports transfers data over eight data
lines simultaneously at speeds of 12,000 Kbps.
Primarily used to connect printers, scanners, and external drives, such as a Zip drive.
Connectivity Ports Connectivity Ports (cont’d)(cont’d)
Serial Ports send data one bit at a time with maximum data transfer rate of 56 Kbps.
Primarily used to connect dial-up modems or a serial mouse.
See the Resources more about serial ports and modems.
Connectivity Ports Connectivity Ports (cont’d)(cont’d)
Monitors connect to a graphics card via a video or VGA port.
Check out the side-by-side graphic of a variety of different ports.
Connectivity Ports Connectivity Ports (cont’d)(cont’d)
Networked computers require an expansion card called a network interface card or NIC.
Check the Resources for more on networking components.
ConnectivityConnectivityInternal CablesInternal Cables
There are a variety of connections inside the box that are just as important!
Great, look at the internal components of a computer system.
ConnectivityConnectivityInternal CablesInternal Cables
The power supply inside the computer system box provides connections and power to all of the internal devices and components, i.e., motherboard, hard drive, and floppy drive.
ConnectivityConnectivityInternal CablesInternal Cables
Different types of power supply connectors are used to connect different devices.
The CluesThe Clues
Device not working Device not found Intermittent errors
on device
Dust: Enemy #1Dust: Enemy #1
Cleaning your mouse or track ball on a regular basis is important to maintain proper functioning.
The ball inside the mouse can be cleaned with soap and water.
Find out more about cleaning your mouse and other components.
Dust: Enemy #1Dust: Enemy #1
Found out more about how the mouse worksand the different types available.
More Mouse TipsMore Mouse Tips
Click on Start button. Point to Settings. Click on Control Panel. Double click on Mouse.
Mouse PropertiesMouse Properties
Boot FirmwareBoot Firmware
The POST, BIOS routines, and CMOS settings and the chips that store them.
What is underWhat is underBoot Firmware?Boot Firmware?
Boot ROM CMOS and CMOS settings CMOS battery Flash ROM
Boot FirmwareBoot Firmware
POST – Power on Self Test.
Routine is run by computer system every time it boots up to test its ability to access internal components and devices.
Feedback is given to user through a series of beeps.
The CluesThe Clues
Dead PC Consistent errors on POST Beep errors CMOS error Core devices: error on boot
RAM Hard drive Floppy drive Video
Memory ChipsMemory Chips
The DRAM and SRAM chips as well as the jumper and CMOS settings that support memory.
What is underWhat is underMemory Chips?Memory Chips?
Proper type of RAM Proper setup of RAM RAM CMOS settings Motherboard jumpers
The CluesThe Clues
Dead PC Parity errors Page Faults with consistent
memory addresses HIMEM.SYS errors
Memory ManagementMemory Management
Organizing and optimizing the use of memory.
What is underWhat is underMemory Memory
Management?Management? Himem.sys EMM386.exe MSDOS.sys option (Win95 only) SYSTEM.INI / WIN.INI Virtual memory Window’s resource usage UMB management
The CluesThe Clues
Errors with “Not enough memory?
Missing XMS, EMS memory Device lockups GPFs at KRNL386.EXE GPFs at USER.EXE or
GDI.EXE
Device DriversDevice Drivers
Device drivers and their configuration.
Device drivers are software that enable an operating system to control a peripheral device.
What is underWhat is underDevice Drivers?Device Drivers?
All device drivers must be referenced in config.sys, system.ini or the registry.
Proper versions. Driver must correspond to correct
peripheral device and correct operating system.
New drivers are usually available on support or download page from manufacturer’s website.
Proper configuration.
The CluesThe Clues
Device locks up on access Intermittent lockups Consistent lockup at
CONFIG.SYS or AUTOEXEC.BAT
Safe Mode
Input / OutputInput / Output
The aspects which allow devices to speak to each other.
What is under What is under Input/Output?Input/Output?
IRQ settings I/O address settings DMA settings Serial port settings Parallel port settings Any card jumpers/
switches
Printer OutputPrinter Output
Is your printer turned on? Is the correct version of the
device driver installed? Common problem if you
move printer between different computers.
Check manufacturer’s website for Frequently Asked Questions or FAQ’s for help in troubleshooting specific models.
Printer OutputPrinter Output
Problems inherent to inkjet or bubble jet printers.
Dried up ink cartridges. One color used up in tri-
color cartridge. When shades of one
color will not print Large capacity
cartridges available
Printer OutputPrinter Output
More problems with inkjet printers
Head alignment. Printer should come with software that
can fix some alignment problems. Try this first!
Next stop - the printer technician.
Printer OutputPrinter Output
Laser Printers
Many mechanisms for printing with a laser printer are housed within the print cartridge.
Try changing the cartridge first!
Laser printers are rated by how many pages each cartridge will print.
The CluesThe Clues
System lockups Device not responding Bizarre behavior from devices
MaintenanceMaintenance
System tools for Windows based PCs. ScanDisk Disk Defragmenter Disk Cleanup
These tools should be used as part of a regular maintenance program to keep your system running at optimum levels.
MaintenanceMaintenance
All of these utilities can be opened from the Start menu.
Click on START. Point to Programs. Point to Accessories. Point to System Tools.
MaintenanceMaintenance 18:20.0
MaintenanceMaintenance
ScanDisk
A utility program that will check the hard disk drive for errors. Tries to fix “bad sector”
problems on hard drive. May fix corrupted files. May fix file linking errors.
MaintenanceMaintenance
Disk Defragmenter
As you create and store files or install programs to a drive, the data is written to the next available cluster on the storage device.
Clusters are rarely contiguous resulting in file fragments being stored in various clusters.
An article with examples of a fragmented disk is in Resources.
MaintenanceMaintenance
Disk Defragmenter
Uninstalling programs and deleting files increases fragmentation of storage device.
Drive performance declines as it has to work harder to locate clusters containing parts of a file.
MaintenanceMaintenance
Disk Cleanup
Recycle bin is an option of Windows based computer systems.
Deleted files are automatically moved to Recycle bin, unless changes are made to default.
Recycle bin should be emptied periodically.
MaintenanceMaintenance
Disk Cleanup
Temporary files are created by: Operating system
during installation of software applications
Software applications themselves
Browsing the Internet
MaintenanceMaintenance
Disk Cleanup
Internet browser software, like Netscape Navigator or Microsoft Internet Explorer, download pages and graphics to your hard drive as you surf the Web.
These files are stored ina cache or temporary directory for faster access to the information.
MaintenanceMaintenance
Several Types of Backups
Full backup copies every application and data file on a storage device. Safest backup method. Takes a long time to complete. Specific utility programs helps
automate process and run overnight. Used mostly in business.
MaintenanceMaintenance
Several Types of Backups
An incremental backup copies only the files that have changed. Most often used by individuals. Takes less time to create.
A regular backup schedule is part of a good computer maintenance plan.
MaintenanceMaintenance
Documentation
Make sure you get a manual with every new hardware or software purchase.
Keep manuals and software disks together in a safe place.
Keep a backup copy of all software someplace else.
Build a FoundationBuild a Foundation
Good maintenance programs will reduce need for troubleshooting.
Keep documentation to aid in troubleshooting efforts.
Eliminate obvious sources of problems first: Power Connectivity
Build a FoundationBuild a Foundation
Zero in on problem by eliminating possible causes one at a time.
Once the problem is zeroed in, replace or reinstall.
It takes more than one try to enact most repairs.
By far, the easiest part.