twist drills reamers milling cutters ground thread … · 2018-12-21 · panther series products...

PRICE LIST1118

Birla Precision Technologies Ltd.

M A N U F A C T U R E R S(DIVISION)

TWIST DRILLS

REAMERS

MILLING CUTTERS

GROUND THREAD TAPS

MASONRY DRILLS

TOOL BITS

APPLICATION SPECIFICTAPS & DRILLS

DAGGER BRANDR

PANTHER SERIES PRODUCTS(DRILLS & TAPS)

PRICE LIST 1118

23, Birla Mansion No. 2, 1st Floor,D.D. Sathe Marg, Prarthana Samaj,

Mumbai - 400 004Tel. : +91 22 23825060

E-mail : [email protected].: www.birlaprecision.com

This Price List is subject to alteration without notice.Prices are Exclusive of ALL TAXES.

(This Price list is effective from 24/11/2018& supersedes all previous issues)

DAGGER BRANDR

E-mail : [email protected]


AHMEDABAD

104, New Cloth Market,Ahmedabad - 380 002.

Tel : (079) - 22123277 / 22124642E-mail : [email protected]

KANPUR

17, A, EXPRESS ROAD,CANAL ROAD,

KANPUR 208001Mob.: 09935112276

E-mail : spshukla©indiantool.com

BANGALORE

TBH Plaza, 2nd Floor, No. 34,SJP Road, Bangalore - 560 002

Tel : (080) - 22128347Mob : 9900244241


LUDHIANA

JASSAL HOUSE, G.T. ROAD,LUDHIANA - 141008

Tel : (0161) - 2722535Mobile : 0931 6801 464 / 0991 0497892

E-mail : [email protected]@indiantool.com

CHENNAI

157, Linghi Chetty Street,Chennai - 600 001.

Tel : (044) - 25342636, 42012503E-mail : [email protected]

PUNE

Shop No. 15, Pesh Industrial PremisesCo.Op. Society Ltd., Plot No. S-79/1/A,

Telco Road, Next to - CenturyEnka Industry, MIDC, Bhosari,

Pune - 411 026Mob.: 9373901862, 9960700470

E-mail : itpune©eth.net

DELHI

2/11, Ansari Road, Darya Ganj,New Delhi - 110 002

Tel : (011) 43575500, 23278531,23276809


SECUNDERABAD

5-1-535, 2nd Floor, Hill Street,Ranigunj, Secundarabad - 500 003.Tel : (040) - 27713177 / 27718093E-mail : [email protected]

KOLKATA

'NICCO' House, 4th Floor,2 Hare Street, Kolkata - 700 001.Tel : (033) - 22485191 / 22486449

Mobile : 09339846922E-mail : [email protected]

MUMBAI OFFICE

Dalmal House, 1st Floor, 206,J. Bajaj Road, Niriman Point,

Mumbai - 400 021.Phone : 91 - 02266168400 / 22819468

Mobile : 9967514596Email : [email protected] : www.indiantool.com

DAGGER BRANDR

DAGGER BRANDR

Spiral Point Taps :

Spiral Flute Taps :

St. Flute Taps :

Roll Form Taps :

NINJA Series of Drills are made out of highest quality of HSSgrade of Materials. These drills are manufactured on our latestCNC Machines, with special geometry to give better performance.These Drills can be used for Stainless Steels, Nickel ChromiumSteels and Forged Steels, etc.

Size Range :

Ninja Series Drills are manufactured; as per IS: 5101 and BS: 328.

Metric Size : 3.0 mm to 13.0 mmInch Series : 1/8” to 1/2”

Applications :

Ninja series drills are best suitable for drilling on;Stainless Steels, Forged Steels, Nickel Chromium Steels andTougher Machining Applications.

ITM Hathyar Square Tool Bits are manufactured out of finest gradesoof HSS materials. All Tool Bits made with 15 bevel angle.

This will give advantage to make easy end grinding preparation forend user.

HATHYAR - 20 – Suitable for free cutting materials.

HATHYAR - 50 – Suitable for difficult to cut materials.

HATHYAR - 51 – Suitable for Harder Alloy steels and stainless steels.

After successful launch of Panther Taps, we at Indian Tool Manufacturers (ITM) – A division of Birla Precision Technologies Ltd., are proud to announce launch of our “NINJA Taps”, a new series of superior quality Taps. These Taps are made out of premium quality of HSS grade of Materials. ITM NINJA Taps meets the customer needs of precise thread quality and improved productivity. The range of these products consists of SPPT Taps, Spiral Taps , St. Flute Taps, and Roll Form Taps.

NINJA

NINJA

HATHYAR - TOOL BITS

Taps

NINJA PRODUCTSNINJA PRODUCTS

Drills

(Size Range M3-M16)

(Size Range M3-M16)

(Size Range M3-M16)

(Size Range M6-M16)

DAGGER BRANDR

PANTHER PRODUCTSPANTHER PRODUCTS

special point geometry to produce better finish and accurate

Panther series Drills are made-out of finest HSS Premium Materials and manufactured from latest CNC Machines, having

holes. These drills designed especially to machine difficult to

Forged steel, etc. cut material like Stainless steels, Nickel chromium steel and

Advantages : Best Suitable for tougher materialg

Unique point geometry to reduce thrust forced during drillingg

Special surface treatment for maximum wear resistance.g

Longer Tool Lifeg

Panther series Taps are made - out of premium grades of HSS Materials. These taps are produced from our latest CNC

forward direction.

application of Cast Iron materials.

materials.

g Spiral Point Taps : Best suitable for through hole applications,

material. Best suitable for soft materials like Aluminum,

g Roll Form Taps : Roll form tapping operation is a chip less

Machines, having unique geometries to suit different work

and Cast Iron Taps. We can supply these taps with TiN, TiCN and Ti(AI)N coating to enhance performance of taps.

spiral point works as a chip breaker, to push chips towards

g Spiral Flute Taps : Best suitable for Blind Hole applications,

operation, Form threads are produced by displacement of

spiral flutes eliminate the chip clogging.

Copper and Brass etc.

Panther series consists of Spiral Flute, Spiral Point, Roll Form

g Cast Iron Taps : Best suitable for blind and through

Tap

s

These products are solutions for :g g gExceptional Performance Better Tool Life Superior quality

APPLICATION SPECIFIC TAPS & DRILLSAPPLICATION SPECIFIC TAPS & DRILLSAPPLICATION SPECIFIC TAPS & DRILLS

Application Taps

'TORPEDO'available on request.

Dri

lls

DAGGER BRANDR

DAGGER BRANDR

INDEXHSS TWIST DRILLS

HSS REAMERS

PG. NO.

Taper Shank Drills

Taper Shank 3 or 4 Fluted Core Drills, Shell Drills

Combine Drills & Countersinks(Centre Drill)

Taper Shank Extra Long Drills

Parallel Shank (Jobber Series)

Parallel Shank (Stub Series)

Parallel Shank (Long Series)

Taper Shank Twist Drill (Long Series)

Parallel Shank Extra Long Drills

Panther Series - Parallel & Taper Drills

Parallel Hand Reamers / Long Fluted Machine Reamers and Parallel / Taper Shank Chucking Reamers / Taper Shank Extra Long Machine Reamers

Taper Pin Reamers Hand / Machine, Machine Jig Reamers

Socket Reamers Parallel / Taper,Machine Bridge Reamers, Shell Reamers

HSS MILLING CUTTERS

Countersinks with Taper ShankTaper Shank Counterbores

Taper Shank CounterboresCylindrical Cutters, HelicalCylindrical Cutters

High Power Cylindrical CuttersSide & Face Cutters, Single Angle Cutters,Double Angle Cutters, Equal Angle Cutters

Equal Angle Cutters, Double (Unequal) Angle Cutters

8-12

1-3

4-5

6-8

13-14

15

16-18

19-25

26

27-28

29-31

33-34

32

36-39

40

34

35

DAGGER BRANDR

INDEXHSS MILLING CUTTERS

HSS TAPS

PG. NO.

Convex / Concave Cutters, Single / Double CornerRounding Cutters

End Mills (Parallel and Taper Shank)

Slot Milling Cutters (Parallel & Taper Shank),Taper Shank T-Slot Cutters

Woodruff Keyslot Cutters, Face Cutters

Keyway Milling Cutters Form Relieved, Taper Shank T-Slot Cutters (Staggered Teeth)

Slotting Cutters, Shell End Mills

Hand & Short Machine Taps andNut Taps

Long Shank Machine TapsPipe Taps - BSP, NPS, NPSF, BSPT, NPTF

B.A. Hand Taps / Nut TapsStandard Hand & Short Machine TapsB.S.B., B.S.Cy., B.S.CON. NGT, BSGT

Hand Taps BSW, BSF, UNC, UNF & NUT Taps, Nib Taps

Panther Series - Taps

Masonry Drills, Tool Bits / DecimalEquivalents

Tapping Chart / HardnessConversion Chart

Point Enhancement / PointGringding Techniques

Speed & Feed / Trouble Shooting(Drills - Taps)

Enhancement (Metallurgical)

41-42

43-45

46-48

49

50

51

52-54

60

61-62

63-64

65-66

69-70

55-57

58-59

67-68

71

DAGGER BRANDR

1

HSS PARALLEL SHANK (JOBBER SERIES)TWIST DRILLS IS : 5101

SIZE

MM INCH DG

PRICE(Rs.)

10 Nos.

SIZE

MM INCH DG

PRICE(Rs.)

10 Nos.

0.30 2.90 0.40 2.95 32 0.50 3.00

0.90 3.20

1.85 49 4.20

1.93 48 4.30 18

1.18 56 3.60

0.80 3.17 1/8

1.59 1/16 3.97 5/32

1.61 52 4.00

1.80 4.10

1.90 4.22 19

2.38 3/32 4.90

1.32 55 3.80 25

1.04 59 3.40

0.60 3.05 31

1.02 60 3.30

1.40 54 3.86 24 1.50 3.90

1.60 3.99 22

1.19 3/64 3.66 27

1.99 47 4.39 17

0.70 3.10

2.00 4.40 2.06 46 4.50 16

1.10 3.57 9/64 28

1.30 3.73 26

1.98 5/64 4.37 11/64

2.08 45 4.57 15

1.09 57 3.50

1.20 3.70

1.51 53 3.91 23

1.78 50 4.09 20

1.00 3.26 30

1.70 51 4.04 21

1.07 58 3.45 29

2.10 4.60 2.18 44 4.62 14 2.20 4.70 13 2.26 43 4.76 3/16 2.30 4.80 12

2.37 42 4.85 11

2.40 4.92 10

2.53 39 5.10 2.58 38 5.11 7

2.44 41 4.98 9

2.60 5.16 13/64 2.64 37 5.18 6

2.49 40 5.00

2.70 5.20

2.50 5.06 8

2.71 36 5.22 5 2.78 7/64 5.30 2.79 35 5.31 4 2.80 5.40

2.82 34 2.87 33

404

404

1091

792

404

435

404

663

404

404

404404

435

435

435

1258

404

404404

435

792

632

404

792

404

404

404

404

435435

435435435

435

435435

435

435

435435

435435435435435

435

435

477

435

477

435

477

477

435

435

435

435

831

1008

1008

477

588

569

831

588588

831

588

477

588

831

569

831

588588

831

831

831

477

831

569

831

8311008

10081008

10081008

1008

13241324

132413241324

1324

1324

1438143814381438

1008

1438

14381438

15511551

1438

15511551

1438

1438

1438

DAGGER BRANDR


SIZE

MM INCH DG

PRICE(Rs.)

10 Nos.

SIZE

MM INCH DG

PRICE(Rs.)

10 Nos.

6.10 9.34 U

5.94 A 9.10

6.70 10.08 X

6.80 10.20

7.00 10.30

5.56 7/32 8.70

5.41 3 8.60

6.63 G 10.00

6.75 17/64 H 10.10

6.40 9.70

7.49 M 10.80

6.04 B 9.30

7.20 10.50

6.15 C 9.40

6.30 9.58 V

5.95 15/64 9.13 23/64

5.61 2 8.80

6.00 9.20

6.20 9.50

6.25 D 9.52 3/8

6.35 1/4 E 9.60

6.53 F 9.90

5.60 8.73 11/32

5.50 8.61 R

5.70 8.84 S 5.79 1 8.90 5.80 9.00 5.90 9.09 T

6.50 9.80H W

6.60 9.92 25/64

6.90 I 10.26 Y

7.10 10.40

7.03 J 10.32 13/32

7.14 9/32 K 10.49 Z

7.30 10.60 7.37 L 10.70

7.40 10.72 27/64

7.54 19/64 11.00 7.60 11.10

7.50 10.90

7.67 N 11.11 7/16 7.70 11.20 7.80 11.30

8.50 12.20

7.94 5/16 11.50

8.10 11.70

8.43 Q 12.10

7.90 11.40

8.40 12.00

8.00 11.51 29/64

8.20 P 11.80

8.33 21/64 11.91 15/32

8.03 O 11.60

8.30 11.90

1745

1900

155115511551

1745

1745

15511745

17451745

1745174519001900

190019001900

1900

2424242424242424

2424242426532653

2424

1900

2653

4033

2800

33283328

3031

2800

4033

3031

2800

4033

2653

2653

3031

2653

28003031

4033

3328

3031

2800

3031

3328

3328

4033

7596

6452

7596

6452

8113

759672027202

8113

7596

8113

6452

8113

7202

7202

6452

8113

7596

7202

44324432

5624

40334033

4248

4432

50245024

424842484248

5024

4432

4033

4248

4432

4432

44324432

5024

502456245624

5624

56245624609460946094

60946094609460946452

2

DAGGER BRANDR

HSS PARALLEL SHANK (JOBBER SERIES)

TWIST DRILLS IS : 5101

SIZE

MM INCH

PRICE(Rs.)

10 Nos.

SIZE

MM INCH

PRICE(Rs.)

10 Nos.

3. (a) Quick Spiral or Slow Spiral Drills :

Sizes (3.0 mm) 1/8" and above 25% extra

(c) Jobbers with Tenon 10% extra

4. For M35 = 40% & M42 = 80% extra

IMPORTANT NOTES :

1. All sizes to be ordered in multiples of 10 only.

ITEMS MARKED (ONLY IN RH) ARE EX-STOCK ITEMS. ALL REMAINING ITEMS IN (RH & LH) WILL ATTRACT MINIMUM ORDER VALUE OF Rs. 35000/- NETT OR MOQ OF 50 NOS. PER SIZE WHICHEVER IS HIGHER.

2. For non-listed intermediate Sizes, the higher Price of the nearest listed size. (INCH or MM) will be applicable.

Sizes up to (3.17 mm) 1/8" 50% extra Sizes over (3.17 mm) 1/8" 25% extra

(b) Left Hand Drills :

12.40 14.50

12.80 15.08 19/32

13.20 15.75

12.60 14.75

12.90 15.25 13.00 15.48 39/64 13.10 33/64 15.50

12.30 31/64 14.29 9/16

12.50 14.68 37/64

12.70 1/2 15.00

13.49 17/32 17.00

13.80 19.05 3/4 13.89 35/64 20.00

14.00 22.00 13.90 21.00

13.70 19.00

13.30 15.87 5/8

14.25 22.22 7/8

13.40 16.00

13.50 17.46 11/16 13.60 18.00

1.00 To 13.00 MM.


Jobber Drill 25 Pcs. Set (0.5 mm Rise)

Jobber Drill 13 Pcs. Set (1/64" Rise)1/16" To 1/4"

9426

1733

Price Rs. / Set

16912

23122

14756

18300

13695

15988

1369514756

15988

14756

15988

15988

19356

14756

15988

14756

16912

19356

231222592625926

3

86058605

9085

8605

11301

9085

11301

1203012030

11301

12030

9085

1305213052

12030

8605

9085

1305213052

11301

12030

DAGGER BRANDR

HSS PARALLEL SHANK (STUB SERIES)TWIST DRILLS IS : 5100

SIZE

MM INCH

PRICE(Rs.)

10 Nos.

SIZE

MM INCH

PRICE(Rs.)

10 Nos.

1.00 9.20 1.19 3/64 9.50 1.20 9.52 3/8 1.50 9.80

1.80 10.00 1.98 5/64 10.20 2.00 10.32 13/32 2.20 10.50

1.59 1/16 9.92 25/64

2.38 3/32 10.72 27/64

4.37 11/64 12.70 1/2

5.80 14.29 9/16

6.75 17/64 15.50 6.50 15.25

7.00 15.87 5/8

7.14 9/32 16.00

3.97 5/32 12.20

4.20 12.50

5.00 13.49 17/32

8.33 21/64 17.50

7.50 16.50

8.73 11/32 18.00

9.00 18.26 23/32

6.00 14.75

7.80 16.75

4.50 12.80

2.50 10.80

6.80 15.75

3.57 9/64 11.91 15/32

6.20 15.00

4.00 12.30 31/64

3.00 11.20

3.20 11.51 29/64

3.80 12.00

2.78 7/64 11.00

3.17 1/8 11.50

3.50 11.80

2.80 11.11 7/16

4.80 13.20

5.16 13/16 13.50 5.20 13.80 5.50 14.00

4.76 3/16 13.00

5.56 7/32 14.25

5.95 15/64 14.50

6.35 1/4 15.08 19/32

7.94 5/16 17.00 8.00 17.25

7.20 16.25

7.54 19/64 16.67 21/32

8.20 17.46 11/16

8.50 17.75

8.80 18.25

9.13 23/64 18.50

581

423

423

423

423

423

423

423

553

423

423

423

457

423

423

477

804

894

125912591368

804

1539

1723

1368

581

894

1184

1723

2120

1539

2120

804581

1184

11841259

1539

2120

2919

2919

2653

2325

2325

2653

2919

36473647

3804

3804

23252416

3804

4017

13502

8152

13717

13717

6940

7980

6487

1017210172

7343

11075

8152

11535

9546

1247312473

12473

8152

6940

6228

6487

12473

7980

9546

11075

6228

6940

11075

13502

7343

13502

7343

13502

13717

14248

1424814442

14248

14699

13994

14699

13994

14699

14442

4017420042005139

5139

55325532

4017

5139

6228

4

DAGGER BRANDR

HSS PARALLEL SHANK (STUB SERIES)TWIST DRILLS IS : 5100

SIZE

MM INCH

PRICE(Rs.)

10 Nos.

SIZE

MM INCH

PRICE(Rs.)

10 Nos.

19.05 3/4 27.78 1.3/32

19.50 28.50

19.84 25/32 29.00

18.75 27.00 19.00 27.50

19.25 28.00

19.75 28.57 1.1/8

20.00 29.37 1.5/32 20.25 29.50 20.50 30.00

20.75 30.50

21.25 31.00

21.50 31.75 1.1/4 21.75 32.00 22.00 32.50

21.00 30.96 1.7/32

21.43 27/32 31.50

22.22 7/8 32.54 1.9/32 22.25 33.00

20.64 13/16 30.16 1.3/16

23.02 29/32 34.13 1.11/32

26.99 1.1/16 40.00

23.25 34.50

25.40 1 38.00

24.61 31/32 36.51 1.7/16

25.25 37.50

24.50 36.50

26.00 38.50 26.19 1.1/32 39.00

23.75 35.00

25.00 37.31 1.15/32 24.75 37.00

24.25 36.00

26.50 39.50

23.81 15/16 35.50

22.50 33.34 1.5/16 22.75 33.50 23.00 34.00

24.00 35.72 1.13/32

23.50 34.92 1.3/8

25.50 38.10 1.1/2

ITEMS MARKED (ONLY IN RH) ARE EX-STOCK ITEMS. ALL REMAINING ITEMS IN (RH & LH) WILL ATTRACT MINIMUM ORDER VALUE OF Rs. 35000/- NETT OR MOQ OF 50 NOS. PER SIZE WHICHEVER IS HIGHER.

1. Sizes upto 13 mm should be ordered in multiples of 10 only.2. For non listed intermediate sizes, the higher price of the nearest listed size (INCH or MM) will be applicable.


IMPORTANT NOTES :

Sizes upto (3.17 mm) 1/8" 50% extra

(b) Left Hand Drills IS : 5362 can be supplied from Sizes over (3.17 mm) 1/8" 25% extra

Sizes (3.0 mm) 1/8" 25% extra

4. For M35 = 40% & M42 = 80% extra

21970

2733224218

27964

21970

241002410024218

27964

27332

21970

28288

14961

15796

15796

16429

17188

17409

14961

16629

18517

19853

14961

1521415475

15214

1521415214

15796

16429

16629

1740917409

18517

1877519853

18775

19853

18775

1985321970

36720

44778

51694

31787

51694

62900

36720

41875

42503

37211

44778

42503

47102

57650

29810

43418

37211

47102

57650

57650

29810

31548

3178731548

41875

33357

41875

44778

44778

51694

56840

57650

5765061973

62900

7023662900

71446

71446

62900

70236

5

DAGGER BRANDR

HSS PARALLEL SHANK (LONG SERIES)TWIST DRILLS IS : 5102

SIZE

MM INCH

PRICE(Rs.)

EACH

SIZE

MM INCH

PRICE(Rs.)

EACH

1.59 1/16 6.10

1.00 5.56 7/32

2.00 6.60

2.20 6.75 17/64

0.70 5.40 0.60 5.30

1.20 5.80

1.40 5.95 15/64 1.30 5.90

1.10 5.60

1.50 6.00

1.19 3/64 5.70

0.80 5.50

1.70 6.30

1.90 6.40

1.60 6.20

1.98 5/64 6.50

1.80 6.35 1/4

2.10 6.70

2.60 7.14 9/32 2.70 7.20

2.80 7.40 2.90 7.50 3.00 7.54 19/64

2.78 7/64 7.30

3.17 1/8 7.70

2.40 7.00

2.30 6.80

3.10 7.60

3.30 7.90 3.40 7.94 5/16

3.20 7.80

2.38 3/32 6.90

3.50 8.00

2.50 7.10

5.20

3.60 8.20

4.10 8.70

3.80 8.33 21/64

4.70 9.52 3/8

3.90 8.40

4.37 11/64 9.00

3.97 5/32 8.50

4.76 3/16 9.80 4.80 9.92 25/64

4.30 8.80

4.00 8.60

4.40 9.13 23/64

3.70 8.30

4.90 10.00

4.20 8.73 11/32

5.00 10.20

4.60 9.50

5.16 13/64

5.10

4.50 9.20

3.57 9/64 8.10

445477

254

254

254

254

399254

254

254

254

254

254254

254

254

254

254

324

324

254

324

324324

352

324

326

352

352

352

352

326

326

352

324

324

352

326

352

326

414414

414

324

352

414

326

352

326

352

326

352

352

352

352352414

1039

1202

940

1195

933

933

1175

933

933

988988

1039

12021086

1039

933

1195

988

1202

516516

475

516

475

905

905

905

905

933

475

589

475

516

516

750

905

589

905905

589

750

905

905

905

905

905

905

905

516

905

538

905933933

6

DAGGER BRANDR

HSS PARALLEL SHANK (LONG SERIES)


SIZE

MM INCH

PRICE(Rs.)

EACH

SIZE

MM INCH

PRICE(Rs.)

EACH

10.80 19.05 3/4

10.32 13/32 18.65 47/64 10.50 18.75 10.72 27/64 19.00

11.00 19.25

11.11 7/16 19.45 49/64 11.20 19.50 11.50 19.75 11.51 29/64 19.84 25/32 11.80 20.00

16.75 25.25

12.50 20.75

12.80 21.03 53/64

13.89 35/64 22.22 7/8

11.91 15/32 20.24 51/64

15.25 23.50

12.00 20.25

15.75 24.00

16.00 24.25

14.25 22.15

13.49 17/32 21.75

13.10 33/64 21.43 27/32

14.75 23.02 29/32

12.20 20.30

15.50 23.81 15/16

15.87 5/8 24.21 61/64

16.25 24.50

14.00 22.25

15.08 19/32 23.42 59/64

14.29 9/16 22.62 57/64

15.48 39/64 23.75

13.00 21.25

13.20 21.50

13.50 21.83 55/64 13.80 22.00

14.50 22.75 14.68 37/64 23.00

15.00 23.25

12.70 1/2 21.00

12.30 31/64 20.64 13/16

16.27 41/64 24.61 31/32

16.50 24.75 16.67 21/32 25.00 63/64

17.07 43/64 25.50

17.50 26.00 17.75 26.19 1.1/32

17.86 45/64 26.25

17.46 11/16 25.80 1.1/64

18.00 26.50 18.25 26.59 1.3/64

18.50 26.99 1.1/16 18.26 23/32 26.75

17.25 25.75

17.00 25.40 1

2232

1447

2008

2429

2514

1404

2339

2339

2798

2429

2745

2047

2798

2575

2339

2745

2514

2575

14462215

24292429

2339

2654

14461613

2232

2232

2232

2232

1613

2232

2429

2467

2429

2467

2575

257525752745

30362798

27982914

1086

14821305

1365

136515861404

1482

15861586

29392968296829683136

34273136313631363329

33293427

3750

3329

4011

4207

3535

5146

5212

6556

7069

4959

6556

3750

6420

3750

3329

3427

3750

3535

3750

4607

4059

46074607

52394801

4337

4801

41524152

4801

3535

4152

4059

4801

5146

5212

6420

6556

72277069

72277227

7

DAGGER BRANDR

HSS PARALLEL SHANK (LONG SERIES)


SIZE

MM INCH

PRICE(Rs.)

EACH

SIZE

MM INCH

PRICE(Rs.)

EACH

27.38 1.5/64 29.75 27.50 29.77 1.11/64

27.00 29.37 1.5/32 27.25 29.50

27.75 30.00

27.78 1.3/32 30.16 1.3/16

28.25 30.56 1.13/64 28.18 1.7/64 30.50

29.00 31.35 1.15/64

28.50 30.75

28.57 1.1/8 30.96 1.7/32

29.25 31.50

28.75 31.00

28.00 30.25

28.97 1.9/64 31.25

HSS TAPER SHANK TWIST DRILLS IS : 5103

SIZE

MM INCH

PRICE(Rs.)

EACH

SIZE

MM INCH

PRICE(Rs.)

EACH

4.37 11/64 6.80

3.20 5.80

5.20 7.80

5.00 7.50

4.00 6.50

3.57 9/64 6.00

5.16 13/64 7.54 19/64

3.00 5.50

3.50 5.95 15/64

3.17 1/8 5.56 7/32

3.80 6.20 3.97 5/32 6.35 1/4

4.76 3/16 7.14 9/32 4.80 7.20

4.20 6.75 17/64

4.50 7.00

} 25% extra

3.00 mm to 7.00 mm 1000 Nos.

Sizes over 3 mm upto 6.50 mm 10% extra

Sizes upto (3.17 mm) 1/8" 50% extra

Sizes below 1mm are manufactured to our Standard.

Sizes over 6.50 mm 5% extra

nearest listed size (INCH or MM) will be applicable.

Sizes over (3.17 mm) 1/8" 25% extra

Above 20mm 25 Nos.

1. For non listed intermediate sizes, the higher price of the

12.8mm to 20mm 100 Nos.

ITEMS MARKEDH (ONLY IN RH) ARE EX-STOCK ITEMS. ALL REMAINING ITEMS IN (RH) WILL ATTRACT MINIMUM ORDER VALUE OF Rs. 35000/- NETT OR MOQ OF 50 NOS. PER SIZE WHICHEVER IS HIGHER.


7.1mm to 12.7mm 500 Nos.

(c) Long Series Drills with Tenon

Sizes MOQ

IMPORTANT NOTES :

(b) Left Hand Drills to IS : 5362

3. For M35 = 40% & M42 = 80% extra

82458245

8315

8137

7450

73667366

7450

7450

7450

84868486

8245

8486

8245

84868597859787638763

876393149314

94881055410554

9488

1093510935

9488

404

404404422404422

422

545

545

545545561

561

545

404

545

545545561561

676

623

545

629

687

687687

676687

687

676

676

8

DAGGER BRANDR


SIZE

MM INCH

PRICE(Rs.)

EACH

SIZE

MM INCH

PRICE(Rs.)

EACH

8.50 16.75

8.00 16.27 41/64 8.20 16.50

7.94 5/16 16.25

8.33 21/64 16.67 21/32

9.00 17.25 9.13 23/64 17.46 11/16

9.50 17.75

8.80 17.07 43/64

9.52 3/8 17.86 45/64

9.92 25/64 18.25 10.00 18.26 23/32

10.32 13/32 18.65 47/64

8.73 11/32 17.00

10.20 18.50

10.50 18.75 10.72 27/64 19.00 10.80 19.05 3/4

9.20 17.50

9.80 18.00

11.00 19.25 11.11 7/16 19.45 49/64 11.20 19.50

12.70 1/2 21.00

12.30 31/64 20.64 13/16H

14.50 22.75

12.80 21.03 53/64

13.50 21.83 55/64

11.51 29/64 19.84 25/32

11.91 15/32 20.24 51/64 12.00 20.25

13.80 22.00

13.49 17/32 21.75

15.00 23.25

14.29 9/16 22.62 57/64

14.75 23.02 29/32

12.50 20.75

14.00 22.25

15.87 5/8 24.21 61/64

11.50 19.75

11.80 20.00

15.75 24.00

15.25 23.50

13.10 33/64 21.43 27/32

13.20 21.50

12.20 20.50

13.00 21.25

13.89 35/64 22.22 7/8

14.25 22.50

14.68 37/64 23.00

15.08 19/32 23.42 59/64

15.48 39/64 23.75

15.50 23.81 15/16H

16.00 24.25

2241

1848

2209

2209

1272

1272

1272

1848

1771

1272

1848

1979

1979

2209

1979

2209

2241

21272127

17711272

1979

22412209

2307

2241

2241

871

909

678

828

755

828909

909

1260

1260

977

678

828

993

1177

828

1220

960

12201260

1220

828

977

1220

1260

1260

884

4123

4678

4678

39303930

3115

4898

2896

2757

3152

3152

3368

2896

38553855

3287

3368

3152

2896

3368

35373537

2757

3473

3537

28962896

3152

3287

3473

2757

3930

4563

4678

467848164898

2307

2451

2451

2491

2307

2491

2451

2451

24912586

26232725

27252725

2725

2725

2757

9

DAGGER BRANDR


SIZE

MM INCH

PRICE(Rs.)

EACH

SIZE

MM INCH

PRICE(Rs.)

EACH

25.50 35.00 25.75 35.32 1.25/64

26.00 35.72 1.13/32

24.75 34.13 1.11/32

26.19 1.1/32 36.00

24.50 33.73 1.21/64

25.00 63/64 34.50 25.25 34.58 1.23/64

25.40 1 34.92 1.3/8

24.61 31/32 34.00

25.80 1.1/64 35.50

28.57 1.1/8 39.69 1.9/16

30.50 42.47 1.43/64

31.35 1.15/64 43.66 1.23/32

26.99 1.1/16 37.00

28.50 39.50

28.75 40.00

29.00 40.48 1.19/32

29.50 41.00 29.75 41.27 1.5/8 29.77 1.11/64 41.50

28.00 38.89 1.17/32

27.25 37.50

28.25 39.29 1.35/64

29.37 1.5/32 40.88 1.39/64

30.00 41.67 1.41/64

30.25 42.07 1.21/32

30.75 42.86 1.11/16

27.00 37.31 1.15/32

28.97 1.9/64 40.08 1.37/64

26.50 36.50

26.75 36.91 1.29/64

30.56 1.13/64 42.50

30.96 1.7/32 43.00H 31.00 43.26 1.45/64 31.25 43.50

27.38 1.5/64 37.70 1.31/64

26.59 1.3/64 36.51 1.7/16

29.25 40.50

26.25 36.12 1.27/64

28.18 1.7/64 39.00

27.75 38.10 1.1/2

27.50 38.00

27.78 1.3/32 38.15 1.33/64

30.16 1.3/16 42.00

32.94 1.19/64 45.24 1.23/32 33.00 45.50 33.34 1.5/16 45.64 1.51/64 33.50 46.00

31.75 1.1/4 44.05 1.47/64 32.00 44.45 1.3/4 32.15 1.17/64 44.50 32.50 44.85 1.49/64

32.54 1.9/32 45.00

31.50 44.00

48985117

5186

5637

5699

4898

51175186

5637

5699

6470

8040

7429

8658

6450

5650

7095

9791

1118711187

6450

11454

11848

7614

6245

6470

7458

8798

6245

7429

70756470

7095

6105

70957309

7429

6470

6105

6245

7095

7429

7458

7614

8658

87988798

9791

1021810218

10218

11187

1118711454

11454

1207012070

13341

13341

14140

12582

14140

13219

14348

13341

14140

14643

14643

16735

20735

21970

15005

17724

15979

19218

20484

15005

16229

16735

17724

16229

18180

14643

19218

19218

19972

17724

19972

19972

16229

20484

14643

18479

2122221222

19218

21222

17724

18479

19972

21222

22486

22486

21970

23504

21970

23504

22486

21970

23504

10

DAGGER BRANDR


SIZE

MM INCH

PRICE(Rs.)

EACH

SIZE

MM INCH

PRICE(Rs.)

EACH

46.43 1.53/64 61.15

46.83 1.27/32 62.00

46.04 1.13/16 61.12 2.13/32

46.50 61.91 2.7/16

47.00 62.50

47.50 63.00 47.62 1.7/8 63.50 2.1/2

48.42 1.29/32 65.00

49.00 66.00 49.21 1.15/16 66.67 2.5/8

50.00 68.00 50.01 1.31/32 68.26 2.11/16

47.23 1.53/64 62.71 2.15/32

50.80 2 69.85 2.3/4

48.00 64.00

49.50 67.00

50.40 1.63/64 69.00

48.02 1.57/64 64.29 2.17/32

51.00 70.00

48.50 65.09 2.9/16 48.82 1.59/64 65.88 2.19/32

49.61 1.61/64 67.47 2.21/32

50.50 69.06 2.23/32

53.97 2.1/8 73.82 2.29/32

61.00 84.00

54.77 2.5/32 75.00

57.50 79.00

52.00 71.44 2.13/16

57.15 2.1/4 78.58 3.3/32

57.94 2.9/32 79.37 3.1/8

59.50 81.76 3.7/32

59.53 2.11/32 82.00

54.00 74.00

58.50 80.17 3.5/32

51.50 70.64 2.25/32

59.00 81.00

55.50 76.00

56.50 77.79 3.1/16

52.39 2.1/16 71.50

56.00 76.99 3.1/32

58.74 2.5/16 80.96 3.3/16

53.50 73.02 2.7/8

53.18 2.3/32 73.00

55.56 2.3/16 76.20 3

52.50 72.00 53.00 72.23 2.27/32

51.59 2.1/32 71.00

56.36 2.7/32 77.00

55.00 75.41 2.31/32

54.50 74.61 2.15/16

57.00 78.00

58.00 80.00

60.00 82.55 3.1/4 60.32 2.3/8 83.00 60.50 83.34 3.9/32 67393

63403

6221462214

634036340363403

67393

63403

40015

52079

24689

24689

25206

27686

24689

27686

23504

27686

27985

29472

40015

27486

27985

27686

27985

28205

24689

25206

29472

4001540015

27486

29472

25206

27486

40015

52079

520795470954709

5470954709

57008

52079

5700854709

57008

52079

57008

52079

57008

6221462214

62214

68527

67393

75739

67393

68527

67393

83904

99981

7630276302

83904

68527

98087

90946

98087

6739367393

75739

90946

75739

78165

7630276302

83904

90946

9808798087

90946

99981

99981

99981106407106407106407107731

107731107731107731

169337

147381

172836

147381

150319

172836

165048

154310

147381

169337

150319

169337

147381

172836

165048

165048

154310

11

DAGGER BRANDR


SIZE

MM INCH

PRICE(Rs.)

EACH

SIZE

MM INCH

PRICE(Rs.)

EACH

84.14 3.5/16 92.07 3.5/8

87.00 96.00 87.31 3.7/16 96.84 3.13/16

85.00 93.66 3.11/16 84.99 3.11/32 93.00

85.72 3.3/8 94.00 86.00 95.00

86.52 3.13/32 95.25 3.3/4

88.11 3.15/32 98.00

88.90 3.1/2 98.42 3.7/8 89.00 99.00 90.00 100.00 90.49 3.9/16 100.01 3.15/16 91.00 101.00

102.00 92.00 101.60 4

88.00 97.00

1. For non listed intermediate sizes, the higher price of the

2. (a) Quick Spiral or Slow Spiral Drills : 25% extra

nearest listed size (INCH or MM) will be applicable.

IMPORTANT NOTES :

ITEMS MARKED H (ONLY IN RH) ARE EX-STOCK ITEMS. ALL REMAINING ITEMS IN (RH) WILL ATTRACT MINIMUM ORDER VALUE OF Rs. 35,000/- NETT OR MOQ OF 3 NOS. PER SIZE WHICHEVER IS HIGHER.

7.1mm to 12.7mm 500 Nos.

12.8mm to 20mm 100 Nos.

Above 20mm 25 Nos.

Size MOQ

(b) Left Hand Drills

3. Oversize shank Drills to IS : 5104 in the following range 10% extra

3.00 mm to 7.00 mm 1000 Nos.

4. For M35 = 40% & M42 = 80% extra

} 25% extra

SIZE RANGE

MM INCH

MTNO.

INSTEAD OFMT NO.

26.5 to 31.75 1.3/64 to 1.1/4 4 3

63.0 to 76.20 2.1/2 to 3 6 5

11.8 to 14.0 15/32 to 35/64 2 1

40.0 to 80.80 1.37/64 to 2 5 4

18.0 to 23.0 23/32 to 29/32 3 2

MORSE TAPER SHANK TWIST DRILLS (IS : 5103)

DRILL SIZEMORSETAPER

SHANK NO.

INCH

OVER

6 76.20 100.00 3 4

4 31.75 50.80 1.1/4 2

1 3.00 14.00 1/8 35/64

3 23.00 31.75 29/32 1.1/4

5 50.80 76.20 2 3

2 14.00 23.00 35/64 29/32

MM

UPTO &INCL.

OVERUPTO &

INCL.

216573

216573

200423

175709175709168548

200423200423204613204613

200423

204613

204613204613208786216573

223645223645

244116

239874

232104

251843

232104

251843

247600

251843251843

239874

232104

247600

239874

232104

247600

12

DAGGER BRANDR

HSS TAPER SHANK 3 OR 4 FLUTED CORE DRILLS IS : 5366

7.94 5/16 28.57 1.1/8

8.00 29.00

9.52 3/8 29.37 1.5/32

10.00 30.00

10.32 13/32 30.16 1.3/16

11.00 30.96 1.7/32

11.11 7/16 31.00

11.91 15/32 31.75 1.1/4

12.00 32.00

12.70 1/2 32.54 1.9/32

13.00 33.00

13.49 17/32 33.34 1.5/16

14.00 34.00

14.29 9/16 34.13 1.11/32

23.00 44.00

27.78 1.3/32 50.00

23.02 29/32 44.45 1.3/4

15.08 19/32 35.00

15.87 5/8 35.72 1.13/32

17.46 11/16 37.31 1.15/32

16.67 21/32 36.51 1.7/16

20.00 41.00

18.26 23/32 38.10 1.1/2

20.64 13/16 41.27 1.5/8

15.00 34.92 1.3/8

16.00 36.00

19.00 39.00

19.84 25/32 40.00

26.19 1.1/32 48.00

17.00 37.00

24.00 45.24 1.25/32

25.40 1 47.00

27.00 49.21 1.15/16

21.00 42.00

18.00 38.00

21.43 27/32 42.07 1.21/32

22.22 7/8 43.00

23.81 15/16 45.00

24.61 31/32 46.00

22.00 42.86 1.11/16

19.05 3/4 39.69 1.9/16

25.00 46.04 1.13/16

26.00 47.62 1.7/8

26.99 1.1/16 49.00

28.00 50.80 2

SIZE

MM INCH

PRICE(Rs.)

EACH

SIZE

MM INCH

PRICE(Rs.)

EACH

1293

1296

3911

4679

5360

1527

2763

5107

6694

7389

1427

1527

1613

2457

2563

2622

2763

3210

2388

3210

3667

2181

1427

1426

2388

2983

3684

3684

1426

1426

2622

3940

2563

3667

4166

4166

4420

4679

5360

6202

6202

6694

7389

7670

8127

8128

8507

8507

9035

9379

10545

12065

9035

11009

25037

25036

19533

28372

28372

32603

16189

17812

17812

21528

22879

19533

14268

13509

30296

25964

13509

22166

12318

14268

12318

16649

19533

15346

16189

12065

22879

15346

21528

22166

24182

24182

25964

26982

30296

36049

13

DAGGER BRANDR

HSS TAPER SHANK 3 OR 4 FLUTED CORE DRILLS IS : 5366

51.00 64.00

52.00 65.00

52.39 2.1/16 65.09 2.9/16

53.00 66.00

55.36 2.3/16 68.26 2.11/16

61.91 2.7/16 74.61 2.15/16

57.15 2.1/4 70.00

60.00 73.00

62.00 75.00

63.50 2.1/2 76.20 3

58.00 71.00

54.00 67.00

58.74 2.5/16 71.44 2.13/16

61.00 74.00

57.00 69.85 2.3/4

55.00 68.00

60.32 2.3/8 73.02 2.7/8

63.00 76.00

53.97 2.1/8 66.67 2.5/8

56.00 69.00

59.00 72.00

NOM DIAINCH

PRICE (Rs.)EACH

PRICE (Rs.)EACH

NOM DIAINCH

HSS SHELL DRILLS BS : 122 - 1964*

SIZE

MM INCH

PRICE(Rs.)

EACH

SIZE

MM INCH

PRICE(Rs.)

EACH

40047

36363

51110

46781

49034

62368

56887

56887

51110

55854

55854

62368

60625

51110

60625

49034

56887

46781

40047

46781

60625

68097

68097

81802

68097

103935

71399

95647

92162

71399

74379

83334

84984

84984

88868

77991

83334

92162

77991

95647

99172

103935

1. For non listed intermediate sizes. The higher price of the nearest listed size (INCH or MM) will be applicable.

ALL ABOVE ITEMS WILL ATTRACT MINIUM ORDER VALUE OF RS. 35,000/- NETT OR 3 NOS. PER SIZE WHICHEVER IS HIGHER.

IMPORTANT NOTES :

2. Sizes upto 20 mm will be with 3 flutes and above 20 mm will be with 4 flutes unless otherwise specifide. 3. Core dills with non-standard number of flutes - 10% extra4. For M35 = 40% & M42 = 80% extra

IMPORTANT NOTES * For Metric sizes , price as per IS: 7772 - 1992 of the next listed size will be applicable. ALL ABOVE ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF RS.35,000/- NETT OR 3 NOS, PER SIZE WHICHEVER IS HIGHER.For M35 = 40% & M42 = 80% extra

1 2 1.1/16 2.1/8

1.5/8 3.1/4

1.3/8 2.3/4

1.1/2 3

4

1.7/8 3.3/4

1.3/4 3.1/2 1.11/16 3.3/8

1.15/16 3.7/8

1.7/16 2.7/8

1.1/8 2.1/4 1.3/16 2.3/8

1.9/16 3.1/8

1.1/4 2.1/2 1.5/16 2.5/8

1.13/16 3.5/8

32383419

6603

38454015

3623

421044504646481450895311

61686029

6409

6922

7910

16729

1368511779

2429922593

4124937325

15055

26090

32245

7157

86579686

18373

30823

20601

14

DAGGER BRANDR

HSS COMBINED DRILLS & COUNTERSINKS(CENTRE DRILLS) IS : 6708 / TYPE 'A'

PILOTDIAMM

PRICE(Rs.)

EACH

1 3.15 215 4 10 473

2.5 6.3 248 10 25 1879

1.25 3.15 215 5 12.5 799 1.6 4 215 6.3 16 945 2H 5 215 8 20 1459

3.15 8 384

BODYDIAMM

PILOTDIAMM

PRICE(Rs.)

EACH

BODYDIAMM

HSS COMBINED DRILLS & COUNTERSINKS(CENTRE DRILLS) IS : 6710 / TYPE 'R'

PILOTDIAMM

PRICE(Rs.)

EACH

4 10 474 10 25 1879

2 5 214 5 12.5 799 2.5 6.3 248 6.3 16 945 3.15 8 384 8 20 1459

BODYDIAMM

PILOTDIAMM

PRICE(Rs.)

EACH

BODYDIAMM

HSS COMBINED DRILLS & COUNTERSINKS(CENTRE DRILLS) IS : 6709 / TYPE 'B'

PILOTDIAMM

PRICE(Rs.)

EACH

1.25 5 377 5 18 2019 1.6 6.3 439 6.3 20 2378

3.15 11.20 1055

2 8 620 8 25 3078 2.5 10 792 10 31.5 3653

1 4 352 4 14 1412

BODYDIAMM

PILOTDIAMM

PRICE(Rs.)

EACH

BODYDIAMM

HSS COMBINED DRILLS & COUNTERSINKS(CENTRE DRILLS) BS : 328 (PART 2) 1950

B.S.NO.

PILOTDIA

INCH

PRICE(Rs.)

EACH

BODYDIA

INCH

OALINCH

BS-4 1/8 5/16 2.1/4 384

BS-7 5/16 3/4 3.1/2 1459

BS-1 3/64 1/8 1.1/2 215 BS-2 1/16 3/16 1.3/4 215 BS-3 3/32 1/4 2 248

BS-5 3/16 7/16 2.1/2 502 BS-6 1/4 5/8 3 945

ITEMS MARKEDH ARE EX-STOCK ITEMS. ALL REMAINING ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF Rs. 35,000/- NETT OR MOQ OF 3 NOS. PER SIZE WHICHEVER IS HIGHER.

IMPORTANT NOTES :

Body Dia upto 8.0mm - 1000 Nos. Body Dia from 10mm to 14mm - 500 Nos.

Size MOQLEFT HAND DRILLS

Body Dia from 16mm to 20mm - 100 Nos.

LH Centre Drills TYPE 'R' not possible

For M35 = 40% & M42 = 80% extra

} 35% extra

15

DAGGER BRANDR

HSS TAPER SHANK TWIST DRILLS (LONG SERIES)IS : 8305 - 1976 (TYPE - N)

SIZE

MM MM

PRICE(Rs.)

EACH

PRICE(Rs.)

EACHINCH

OAL SIZE

MM MMINCH

OAL

7/32 161 33/64 215

15/64 161 17/32 223

5.50 161 13.00 215

5/16 181 39/64 251

8.20 181 15.75 251

6.00 161 13.50 223

9.50 188 17.00 257

9.20 188 16.75 257

6.20 167 13.80 223

7.20 174 14.75 245

5.00 155 12.50 215

5.80 161 13.20 215

6.50 167 14.00 223

7.80 181 15.25 251

1/4 167 35/64 223

7.00 174 14.50 245

13/64 155 1/2 215

5.20 155 12.80 215

19/64 181 19/32 251

17/64 174 14.25 245

7.50 174 15.00 245

21/64 181 5/8 251

8.50 181 16.00 251

11/32 188 16.25 257

8.80 188 41/64 257

6.80 174 9/16 245

9/32 174 37/64 245

8.00 181 15.50 251

9.00 188 16.50 257

23/64 188 21/32 257

9.80 197 17.25 263

10.00 197 17.50 263

10.20 197 17.75 263

10.50 197 18.00 263

27/64 206 18.25 269

11.00 206 18.50 269

7/16 206 47/64 269

25/64 197 11/16 263

10.80 206 23/32 269

11.20 206 18.75 269

3/8 197 43/64 263

13/32 197 45/64 263

29/64 206 3/4 275

11.50 206 19.00 269

15/32 215 49/64 275

12.20 215 19.75 275

11.80 206 19.25 275

12.00 215 19.50 275

31/64 215 25/32 275

1990

1799

1650

1373

1373

1233

1233

1650

1701

1373

1650

1799

1835

1701

1989

2036

1799

1373

1373

2377

2987

2429

2520

1530

1529

1530

1233

1835

1650

1799

1835

2036

2312

2377

2036

2036

2520

2520

2520

2520

3148

2312

2987

1990

2312

2377

3148

2429

2429

5421

5761

5421

5421

5761

4992

5434

5434

5434

4992

5519

5519

5608

5856

5761

4992

5519

5856

5608

5608

5608

5421

3149

3148

3148

3148

4480

3148

3148

3451

3590

3591

4580

4480

4683

4683

4683

3590

4683

4480

4804

4804

4804

4888

4580

3451

4580

4888

4888

16

DAGGER BRANDR

HSS TAPER SHANK TWIST DRILLS (LONG SERIES)IS : 8305 - 1976 (TYPE-N)

SIZE

MM MM

PRICE(Rs.)

EACH

PRICE(Rs.)

EACHINCH

OAL SIZE

MM MMINCH

OAL

20.00 275 28.25 351

20.25 282

20.50 282 1.1/8 351

51/64 282 28.50 351

13/16 282 28.75 351

24.00 327 33.50 397

26.75 343 1.1/2 426

25.25 335 1.13/32 416

27.25 343 39.00 426

27.75 343 1.9/16 426

22.50 296 1.7/32 360

21.25 289 1.5/32 351

22.75 296 31.25 360

23.00 296 31.50 360

24.75 327 35.00 406

22.00 289 30.25 360

7/8 289 30.50 360

25.50 335 36.50 416

59/64 319 32.50 397

1 335 36.00 416

27/32 289 29.50 351

29/32 296 31.75 1.1/4 369

21.75 289 30.00 351

31/32 327 1.3/8 406

21.50 289 29.75 351

15/16 327 1.5/16 397

20.75 282

61/64 327 34.00 406

25.75 335 1.7/16 416

21.00 282 29.00 351

53/64 282 29.25 351

22.25 289 30.75 360

23.25 319 32.00 397

26.00 335 37.00 416

55/64 289 1.3/16 360

24.50 327 34.50 406

57/64 296 31.00 360

23.75 327 33.00 397

24.25 327 1.11/32 406

25.00 327 35.50 406

23.50 319 1.9/32 397

1.1/32 335 1.15/32 416

26.25 335 37.50 416

26.50 335 38.00 426

1.1/16 343 38.50 426

27.00 343 1.17/32 426

27.50 343 39.50 426

1.3/32 343 40.00 426

28.00 343

7185

9825

10255

9825

7045

8043

7673

8043

9825

9825

13479

5953

7673

5953

6064

7044

7185

6064

6064

5856

7185

9825

7044

7045

5953

7673

8043

9825

9825

10629

10255

10255

10629

10629

10629

10629

11054

11054

11372

10629

11372

11372

13479

13479

13909

14336

14336

14336

13909

27820

27820

29870

28732

27820

28732

29870

28732

29870

27820

14797

16505

15635

16078

14797

16078

15635

16078

16505

16505

14797

20748

21651

15635

15214

15214

16505

16505

16625

17266

19889

16625

20748

20748

20748

21651

22597

22597

22597

24763

24763

25689

25689

25689

22597

22597

17

DAGGER BRANDR

HSS TAPER SHANK TWIST DRILLS (LONG SERIES)IS : 8305 - 1976 (TYPE-N)

SIZE

MM MM

PRICE(Rs.)

EACH

PRICE(Rs.)

EACHINCH

OAL SIZE

MM MMINCH

OAL

44.50 447 49.50

45.00 447 50.00

1.3/4 447 1.15/16 470

42.50 436 47.50 459

41.00 436 46.00

41.50 436 46.50 459

42.00 436 1.27/32

43.00 447 48.00

1.11/16 447 1.7/8 470

1.19/32 436 1.25/32

44.00 447 49.00

1.5/8 436 1.13/16

1.23/32 447 48.50 470

43.50 447 1.29/32

1.21/32 436 47.00

40.50 436 45.50 459

39166

29870

33219

29870

37619

39166

29870

29870

33219

31398

31398

35687

35687

37619

37619

39166

41294

42974

42974

41294

41294

45145

42974

45145

49446

49446

41294

49446

49446

51992

49446

45145

ITEMS MARKEDH ARE EX-STOCK ITEMS. ALL REMAINING ITEMS WILL ATTRACT MINIUM ORDER VALUE OF RS. 35,000/- NETT OR MOQ OF 3 NOS. PER SIZE WHICHEVER IS HIGHER.

For M35 = 40% & M42 = 80% extra

IMPORTANT NOTES : For non listed intermediate sizes, the higher price of the nearest listed size (INCH or MM) will be applicable.

18

DAGGER BRANDR

HS

S T

AP

ER

SH

AN

K T

WIS

T D

RIL

LS

- E

XT

RA

LO

NG

IS

: 7

82

2 -

19

75

OV

ER

AL

L L

EN

GT

H IN

MIL

IME

TE

RS

200

225

25

0

27

5

30

0

31

5

32

5

350

375

400

PR

ICE

EA

CH

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

4.0

5

/32

1781

2036

23

20

2

63

1

29

86

-

34

53

-

- -

5

.5

7

/32

1827

211

0

24

32

2

85

3

32

33

-

37

28

-

- -

3

.5

1781

2036

23

20

2

63

1

29

86

-

34

53

-

- -

3

.0

1

/8

1733

2036

22

56

2

56

7

29

11

- 3

36

1

- -

-

4

.5

1827

2094

23

20

2

69

4

31

66

-

36

32

-

- -

5

.0

3

/16

1827

2094

23

20

2

69

4

31

66

-

36

32

-

- -

6

.0

1837

211

0

24

57

2

85

3

32

33

3

53

5

37

28

-

- -

8

.0

5

/16

2145

2396

27

45

3

22

0

37

00

4

01

7

42

22

-

- -

7

.5

2053

2343

26

41

3

10

8

36

09

3

95

5

41

08

-

- -

6

.5

1

/4

1863

2176

24

70

2

99

6

33

61

3

64

6

38

39

-

- -

8

.5

2215

2485

27

99

3

27

8

37

69

4

06

7

43

40

-

- -

7

.0

2031

2287

25

66

3

05

3

35

17

3

86

8

40

31

-

- -

SIZ

E

M

M

INC

H

19

DAGGER BRANDR

HS

S T

AP

ER

SH

AN

K T

WIS

T D

RIL

LS

- E

XT

RA

LO

NG

IS

: 7

82

2 -

19

75

(C

on

td.)

SIZ

EO

VE

RA

LL L

EN

GT

H IN

MIL

IME

TE

RS

PR

ICE

EA

CH

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

200

225

25

0

27

5

30

0

31

5

32

5

350

375

400

M

M

INC

H

9

.0

2251

2522

286

6

32

94

3

79

8

41

73

4

37

6

- -

-

1

0.0

2312

2616

295

1

34

45

3

96

9

43

32

4

51

7

5056

5700

6340

11

.0

2430

2799

317

9

37

00

4

24

9

46

66

4

86

8

5525

6196

6927

11

.5

7

/16

2520

2858

326

0

37

90

4

35

3

47

45

4

95

9

5674

6358

7108

1

0.5

2377

2715

314

8

36

40

4

17

3

45

18

4

74

5

5425

6096

6869

1

2.0

- 2987

340

3

39

41

4

51

7

49

29

5

17

9

5856

6502

7293

1

2.5

1

/2

- 3148

351

7

40

85

4

65

7

50

88

5

32

2

6132

6922

7821

9.5

3

/8

2306

2551

286

6

33

86

3

89

4

42

29

4

39

5

- -

-

20

DAGGER BRANDR

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

250

275

300

31

5

32

5

35

0

37

5

40

0

425

450

475

500

OV

ER

AL

L L

EN

GT

H IN

MIL

IME

TE

RS

PR

ICE

EA

CH

1

6.5

4888

5482

6189

66

61

6

98

1

79

88

8

99

8

10

14

3

11543

13026

14538

16221

1

6.0

5/8

4804

5411

6074

65

36

6

87

3

78

42

8

83

6

99

03

11

371

12890

14391

16122

1

8.0

- -

6502

70

24

7

32

5

83

99

9

43

6

10

56

7

11968

13478

15019

16685

1

3.0

4173

4779

5425

58

91

6

19

6

70

50

7

91

2

88

88

-

- -

-

1

5.5

4685

5321

5954

64

44

6

75

1

77

31

8

70

0

97

36

11

140

12672

14217

15947

1

4.0

4450

5021

5674

61

57

6

40

8

73

25

8

27

6

92

87

-

- -

-

1

3.5

4308

4875

5573

60

35

6

30

7

71

84

8

110

9

112

-

- -

-

1

7.0

4992

5615

6254

67

40

7

07

5

811

0

911

9

10

25

5

11680

13188

14678

16372

1

4.5

9/1

6

4480

5089

5759

61

89

6

50

2

74

66

8

42

0

94

49

11

110

12401

13955

15650

1

5.0

4580

5200

5897

63

21

6

66

1

76

15

8

53

7

96

04

11

060

12551

14094

15810

1

7.5

11

/16

- -

6408

68

69

7

21

2

82

66

9

27

4

10

37

7

11820

13341

14864

16526

1

8.5

- -

6606

71

08

7

45

8

84

73

9

54

8

10

73

2

12121

13634

15122

16846

HS

S T

AP

ER

SH

AN

K T

WIS

T D

RIL

LS

- E

XT

RA

LO

NG

IS

: 7

822 -

1975 (

Co

ntd

.)

M

M

INC

H

SIZ

E

21

DAGGER BRANDR

HS

S T

AP

ER

SH

AN

K T

WIS

T D

RIL

LS

- E

XT

RA

LO

NG

IS

: 7

822 -

1975 (

Co

ntd

.)

SIZ

E

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

OV

ER

AL

L L

EN

GT

H IN

MIL

IME

TE

RS

PR

ICE

EA

CH

250

275

300

31

5

32

5

35

0

37

5

40

0

425

450

475

500

M

M

INC

H

20.0

- -

6922

74

12

7

78

8

88

69

1

00

18

11

25

6

12647

14094

15622

17317

22.5

7

/8

- -

7683

81

98

8

57

8

97

09

1

08

75

1

21

59

1

3711

15329

16995

18813

19.0

3

/4

- -

6723

72

12

7

56

9

86

12

9

69

5

10

87

5

12248

13789

15271

16942

22.0

- -

7485

80

30

8

39

9

95

48

1

07

32

1

20

31

13478

15120

16708

18505

20.5

- -

7050

75

47

7

89

7

90

17

1

01

43

11

42

4

12800

14336

15863

17578

21.0

13/1

6

- -

7176

74

58

8

03

2

92

11

10

35

3

116

11

13075

14580

16154

17853

19.5

- -

6806

72

93

7

64

2

87

67

9

88

6

110

96

1

2401

13952

15454

17108

21.5

- -

7325

78

21

8

16

6

93

72

1

05

52

11

83

2

13270

14888

16445

18217

22

DAGGER BRANDR

300

315

325

35

0

37

5

40

0

42

5

45

0

475

500

525

OV

ER

AL

L L

EN

GT

H IN

MIL

IME

TE

RS

PR

ICE

EA

CH

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

R

s.

M

M

INC

H

24.0

15/1

6

8836

- 9825

10

87

5

119

91

1

32

47

1

48

33

1

65

60

18252

20198

-

28.0

- -

- 1

43

36

1

54

54

1

67

57

1

85

16

2

04

36

22839

24600

-

27.0

1.1

/16

- -

- 1

34

78

1

46

47

1

58

88

1

76

03

1

94

62

21363

23490

-

26.0

- -

- 1

26

47

1

37

49

1

50

12

1

66

85

1

85

16

20339

22407

-

24.5

911

2

- 10255

113

70

1

24

01

1

36

99

1

53

22

1

70

32

18786

20746

-

25.0

- -

10627

117

89

1

28

90

1

41

21

1

57

54

1

75

25

19308

21326

-

27.5

- -

- 1

39

09

1

50

19

1

62

80

1

80

71

1

99

54

21858

24018

-

26.5

- -

- 1

30

26

1

41

50

1

54

31

1

71

49

1

89

88

20820

22954

-

28.5

1.1

/8

- -

- 1

47

99

1

59

10

1

71

73

1

89

48

2

09

32

22916

25107

-

25.5

1

- -

- 1

21

53

1

32

70

1

45

41

1

62

02

1

79

84

19827

21824

-

23.0

8042

8584

8897

10

03

0

1111

2

12

37

5

13

90

9

15

60

8

17246

19087

-

23.5

8836

- 9825

10

76

8

118

37

1

27

99

1

43

81

1

60

52

17768

19673

-

SIZ

E

HS

S T

AP

ER

SH

AN

K T

WIS

T D

RIL

LS

- E

XT

RA

LO

NG

IS

: 7

822 -

1975 (

Co

ntd

.)

23

DAGGER BRANDR

PR

ICE

EA

CH

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

R

s.

OV

ER

AL

L L

EN

GT

H IN

MIL

IME

TE

RS

300

315

325

35

0

37

5

40

0

42

5

45

0

475

500

525

M

M

INC

H

3

2.0

- -

- 1

66

25

1

79

84

1

98

89

2

18

58

2

40

74

26237

28785

30668

2

9.0

- -

- 1

52

14

1

63

46

1

76

42

1

94

25

2

14

31

23401

25675

-

3

1.0

1.1

/4

- -

- 1

65

05

1

76

38

1

89

53

2

08

43

2

29

62

25070

27508

-

3

6.0

- -

- -

- 2

34

90

2

57

88

2

83

58

30941

33890

36048

2

9.5

- -

- 1

56

35

1

67

57

1

80

59

1

98

89

2

18

88

23930

26237

-

3

5.0

1.3

/8

- -

- -

- 2

25

98

2

48

46

2

73

02

29793

32612

34754

3

0.0

1.3

/16

- -

- 1

60

78

1

72

08

1

85

05

2

03

39

2

23

81

24433

26753

-

3

3.0

1.5

/16

- -

- -

- 2

07

46

2

28

30

2

51

47

27411

30043

32051

3

4.0

- -

- -

- 2

16

52

2

38

00

2

62

21

28598

31334

33402

3

7.0

1.7

/16

- -

- -

- 2

43

85

2

67

53

2

94

39

32104

35123

37400

3

8.0

1.1

/2

- -

- -

- 2

53

13

2

78

19

3

05

78

33307

36456

38810

3

9.0

- -

- -

- 2

62

37

2

90

38

3

15

50

34364

37545

39964

SIZ

E

HS

S T

AP

ER

SH

AN

K T

WIS

T D

RIL

LS

- E

XT

RA

LO

NG

IS

: 7

822 -

1975 (

Co

ntd

.)

24

DAGGER BRANDR

PR

ICE

EA

CH

OV

ER

AL

L L

EN

GT

H IN

MIL

IME

TE

RS

400

42

5

45

0

47

5

500

525

R

s.

Rs.

R

s.

Rs.

R

s.

Rs.

48.0

1.7

/8

- -

- -

53380

-

40.0

27335

29

87

0

32

66

1

35

52

5

38777

41224

46.0

1.1

3/1

6

- -

- -

49382

-

41.0

1.5

/8

- -

- -

40061

-

47.0

- -

- -

51378

-

42.0

- -

- -

41842

-

43.0

- -

- -

43699

-

44.0

- -

- -

45521

-

45.0

1.3

/4

- -

- -

47376

-

50.0

- -

- -

57574

-

49.0

1.1

5/1

6

- -

- -

55343

-

HS

S T

AP

ER

SH

AN

K T

WIS

T D

RIL

LS

- E

XT

RA

LO

NG

IS

: 7

82

2 -

19

75

(C

on

td.)

IMP

OR

TA

NT

NO

TE

S :

1)

Siz

e 6

mm

to 5

0 m

m O

AL 2

00,2

50,3

15,4

00 &

500 m

m w

ill b

e to IS

7822 -

1975. A

ll oth

er

size

to o

ver

standard

. 2)

For

M35 =

40%

& M

42 =

80%

extr

a

3)

For

non li

sted in

term

edia

te s

izes

, th

e h

igher

price

of th

e n

eare

st li

sted s

ize (

INC

H o

r M

M)

will

be a

pplic

able

. .

4)

ITE

MS

MA

RK

ED

* A

RE

EX

-ST

OC

K IT

EM

S , A

LL R

EM

AIN

ING

IT

EM

S W

ILL A

TT

RA

CT

MIN

IMU

M O

RD

ER

VA

LU

E O

F R

S.3

5,0

00/-

NE

TT

OR

MO

Q O

F 3

NO

S P

ER

SIZ

E W

HIC

HE

VE

R IS

HIG

HE

R.

M

M

INC

H

SIZ

E

25

DAGGER BRANDR

M

M

INC

H

SIZ

E

IMP

OR

TA

NT

NO

TE

S :

1)

Oth

er

deta

ils w

ill b

e m

ain

tain

ed a

s per

IS: 7823-1

983. 2

) F

or

non li

sted in

term

edia

te s

izes,

the h

igher

price

of

the n

eare

st li

sted s

ize (

INC

H

or

MM

) w

ill b

e a

pp

lica

ble

.

3) A

LL A

BO

VE

IT

EM

S W

ILL A

TT

RA

CT

MIN

IMU

M O

RD

ER

VA

LU

E O

F R

S.3

5,0

00/-

NE

TT

OR

15 N

OS

, P

ER

SIZ

E W

HIC

HE

VE

R I

S H

IGH

ER

. 4)

For

M35 =

35

% &

M4

2 =

80

% e

xtra

OV

ER

AL

L L

EN

GT

H IN

MIL

IME

TE

RS

50

10

0

12

5

15

0

17

5

20

0

225

250

300

350

HS

S P

AR

AL

LE

L S

HA

NK

TW

IST

DR

ILL

S E

XT

RA

LO

NG

TO

OU

R S

TA

ND

AR

DP

RIC

E (

Rs

.) E

AC

H

11.5

- -

- -

- -

- 3437

4465

5886

9.0

- -

- -

- 2047

- 3008

3912

5030

9.5

3

/8

- -

- -

- 2156

- 3026

3998

5191

12.0

15/3

2

- -

- -

- -

- 3608

4735

6039

12.5

1

/2

- -

- -

- -

- 3720

4888

6441

10.5

13/3

2

- -

- -

- 2321

- 3322

4332

5705

11.0

7

/16

- -

- -

- -

- 3437

4465

5886

10.0

- -

- -

- 2246

- 311

0

4176

5424

0.5

-

730

- -

- -

- -

- -

-

1.0

-

- 452

- -

- -

- -

- -

- 1

/16

- -

558

666

- -

- -

- -

3.5

- -

- 916

1067

1373

17

06

2053

2619

3555

5.0

3

/16

- -

- 939

1197

1487

18

26

2156

2858

3789

6.0

- -

- 1027

1337

1636

19

80

2376

3109

4098

4.5

- -

- 939

1151

1373

17

06

2053

2697

3611

6.5

1

/4

- -

- -

- 1673

- 2419

3257

4098

7.5

9

/32

- -

- -

- 1891

- 2829

3750

4602

0.6

-

683

- -

- -

- -

- -

-

1.2

3

/64

- 452

- -

- -

- -

- -

3.0

1

/8

- -

- 940

1151

1303

15

49

1827

2279

-

8.0

5

/16

- -

- -

- 1984

- 2947

3842

4710

- 5

/64

- -

578

696

- -

- -

- -

5.5

7

/32

- -

- 1027

1280

1589

19

45

2295

3036

3949

8.5

11

/32

- -

- -

- 2047

- 3008

3912

5030

7.0

- -

- -

- 1857

- 2661

3681

4602

0.8

-

467

- -

- -

- -

- -

-

4.0

5

/32

- -

- 916

1067

1373

17

06

2053

2619

3611

26

DAGGER BRANDR

3.30 8.00

3.20 7.94 5/16

3.80 8.60

3.00 7.00

3.10 7.14 9/32

3.17 1/8 7.50

3.40 8.20

3.50 8.30

3.57 9/64 8.33 21/64

3.70 8.50

4.00 8.80

3.97 5/32 8.70

4.20 9.30

4.37 11/64 9.50

4.50 9.52 3/8

4.76 3/16 10.00

5.00 10.20

5.10 10.30

5.16 13/64 10.32 13/32

5.20 10.40

4.10 9.00

5.30 10.50

6.70 12.80

6.35 1/4 12.00

6.50 12.50

6.60 12.70 1/2

5.50 11.00

6.00 11.50

6.80

5.56 7/32 11.11 7/16

6.20 11.80

6.75 17/64 13.00

IMPORTANT NOTE :

MINIMUM ORDER VALUE OF RS. 35,000/- NETT OR MOQ 50 NOS. PER SIZE WHICHEVER IS HIGHER.

All sizes to be ordered in multiples of 10 only.

SIZE

MM INCH

PRICE(Rs.)

10 Nos.

SIZE

MM INCH

PRICE(Rs.)

10 Nos.

HSS-E PANTHER SERIES PARALLEL SHANKTWIST DRILLS IS : 5101

1122

1941

1941

3272

3272

2094

1941

3272

2564

1362

1788

2094

2094

2356

3272

1788

1362

1941

1362

2564

3272

645

795

767

767

795

795

795

795

1122

1122

1122

5444

5982

7592

5444

6783

4491

5444

5736

5444

12264

8710

12264

8229

8229

3582

3781

4491

3582

4491

5444

5736

5982

7592

8229

8229

9723

10255

10255

10952

11617

12264

27

DAGGER BRANDR

SIZE

MM INCH

PRICE (Rs.)EACH

SIZE

MM INCH

PRICE (Rs.)EACH

HSS-E PANTHER SERIES TAPER SHANK TWIST DRILLS - IS : 5103

16.25 24.00

16.30 25.00 63/64

13.20 19.00

12.70 1/2 18.50

14.25 20.25

14.75 21.00

13.50 19.25

15.08 19/32 22.00

10.00 16.75

10.32 13/32 17.25

12.50 18.26 23/32

9.52 3/8 16.67 21/32

13.89 35/64 19.84 25/32

11.50 18.00

10.50 17.46 11/16

14.00 20.00

14.20 20.24 51/64

14.29 9/16 20.50

12.00 18.25

13.49 17/32 19.05 3/4

10.20 17.00

13.80 19.50

14.50 20.64 13/16

15.00 21.50

11.00 17.50

15.25 22.22 7/8

13.00 18.75

15.50 22.50

15.87 5/8 23.00

16.00 23.50

16.27 41/64 24.50

16.50 25.40 1

ITEMS MARKED H (ONLY IN RH) ARE EX-STOCK ITEMS. ALL REMAINING ITEMS IN (RH) WILL ATTRACT MINIMUM ORDER VALUE - OF RS. 35,000/- NETT OR MOQ 3 NOS PER SIZE WHICHEVER IS HIGHER.

1118

2671

3026

1719

2390

1341

1296

2495

2671

1193

1588

1719

1701

2671

2983

2983

1648

2671

1719

2495

2871

2871

2871

2983

2983

3308

3026

3116

3308

3116

3026

3116

3910

3722

4254

3308

3679

3679

3308

3679

3722

3491

3363

3722

3910

3363

3910

3308

3679

4204

4254

4254

4254

4689

4776

4776

5204

5307

4437

6316

6502

6611

6909

7000

28

DAGGER BRANDR

HSS PARALLEL HAND REAMERS, HSS LONG FLUTEDMACHINE REAMERS AND HSS PARALLEL/TAPER SHANK

CHUCKING REAMERS

SIZE

MM INCH

HANDREAMERSIS : 5444

LONG FLUTEDMACHINEREAMERSIS : 5445

PARALLELSHANKIS:5446

TAPERSHANKIS:5447

CHUCKING REAMERS

Price (Rs.) Each

5.00 1109 1109 1109 1109

3.97 5/32 1109 1109 1109 1109

3.17 1/8 1109 1109 1109 11093.00 1109 1109 1109 1109

3.50 1109 1109 1109 1109

4.00 1109 1109 1109 11094.50 1109 1109 1109 11094.76 3/16 1109 1109 1109 1109

5.50 1109 1109 1109 11095.56 7/32 1109 1109 1109 11096.00 1289 1289 1289 12896.35 1/4 1289 1289 1289 1289

17.00 3150 3150 - 3150

9.00 1527 1527 1527 1527

25/64 1844 1844 1844 1844

15.00 2737 2737 2737 2737

10.32 13/32 1844 1844 1844 184411.00 2071 2071 2071 2071

12.70 1/2 2235 2235 2235 2235

15.87 5/8 2737 2737 2737 2737

14.00 2719 2719 2719 2719

7.94 5/16 1464 1464 1464 14648.00 1464 1464 1464 14648.73 11/32 1527 1527 1527 1527

16.00 2737 2737 2737 2737

23.00 5282 5282 - 5282

10.00 1844 1844 1844 1844

13.49 17/32 2719 2719 2719 2719

32.00 10478 10478 - 10478

33.34 1.5/16 11899 11899 - 11899

34.92 1.3/8 14628 14628 - 14628

11.91 15/32 2154 2154 2154 2154

23/64 1527 1527 1527 1527

13.00 2719 2719 2719 2719

15.08 9/32 2737 2737 2737 2737

11.11 7/16 2071 2071 2071 2071

7.00 1291 1291 1291 1291

12.00 2154 2154 2154 2154

9.52 3/8 1664 1664 1664 1664

14.29 9/16 2719 2719 2719 2719

17.46 11/16 3150 3150 - 3150

22.00 4525 4525 - 452522.22 7/8 4525 4525 - 4525

25.40 1 5972 5972 - 5972

7.14 9/32 1291 1291 1291 1291

18.26 23/32 3587 3587 - 3587

16.67 21/32 3150 3150 - 3150

20.00 3999 3999 - 3999

26.00 7248 7248 - 7248

21.00 4525 4525 - 4525

25.00 5865 5865 - 5865

26.99 1.1/16 8290 8290 - 829027.00 8290 8290 - 829028.00 8290 8290 - 8290

23.81 15/16 5852 5852 - 5852

20.64 13/16 4072 4072 - 4072

28.57 1.1/8 8290 8290 - 829029.00 8793 8793 - 879330.00 9489 9489 - 9489

19.05 3/4 3587 3587 - 3587

30.16 1.3/16 9489 9489 - 9489

19.00 3587 3587 - 3587

18.00 3375 3375 - 3375

31.00 10478 10478 - 10478

24.00 5852 5852 - 5852

31.75 1.1/4 10478 10478 - 10478

33.00 11899 11899 - 11899

34.00 13368 13368 - 13368

35.00 14628 14628 - 1462836.00 14628 14628 - 1462836.51 1.7/16 14735 14735 14735

29

DAGGER BRANDR

HSS PARALLEL HAND REAMERS, HSS LONG FLUTEDMACHINE REAMERS AND HSS TAPER SHANK

CHUCKING REAMERS

SIZE

MM INCH

LONG FLUTEDMACHINEREAMERS

IS:5445

Price (Rs.) Each

CHUCKINGREAMERS

TAPER SHANKIS:5447

HANDREAMERSIS : 5444

30

44.00 23051 23051 23051

47.62 1.7/8 31326 31326 31326

49.21 1.15/16 31326 31326 31326

47.00 29167 29167 29167

54.00 37340 37340 -

45.00 27013 27013 27013

39.00 17744 17744 17744

46.00 27013 27013 27013

49.00 31326 31326 31326

51.00 31326 31326 31326

40.00 19394 19394 19394

37.00 16057 16057 1605738.00 16057 16057 16057

39.69 1.9/16 19394 19394 19394

41.00 19559 19559 19559

38.10 1.1/2 16057 16057 16057

41.27 1.5/8 23051 23051 23051

42.86 1.11/16 23051 23051 2305143.00 23051 23051 23051

42.00 23051 23051 23051

44.45 1.3/4 23051 23051 23051

48.00 31326 31326 31326

50.00 31326 31326 3132650.80 2 31326 31326 31326

52.00 37340 37340 -52.39 2.1/16 37340 37340 -53.00 37340 37340 -53.97 2.1/8 37340 37340 -

55.56 2.3/16 43358 43358 -56.00 43358 43358 -57.00 43358 43358 -57.15 2.1/8 43358 43358 -58.00 46391 46391 -

59.00 46391 46391 -60.00 55041 55041 -

58.74 2.5/16 46391 46391 -

60.32 2.3/8 55041 55041 -61.00 55041 55041 -61.91 2.7/16 55041 55041 -62.00 55041 55041 -

55.00 43358 43358 -

63.50 2.1/2 55041 55041 -63.00 55041 55041 -

64.00 55041 55041 -65.00 - 66454 -65.09 2.9/16 66454 66454 -

71.44 2.13/16 77376 77376 -

76.00 - 94474 -76.20 3 94474 94474 -

75.00 - 94474 -74.61 2.15/16 89967 89967 -

69.00 - 73645 -68.26 2.11/16 73645 73645 -68.00 - 73645 -

69.85 2.3/4 73645 73645 -

72.00 - 89967 -

67.00 68697 68697 -

74.00 - 89967 -

71.00 73645 73645 -70.00 - 73645 -

66.67 2.5/8 68697 68697 -

73.00 - 89967 -

66.00 - 68697 -

73.02 2.7/8 89967 89967 -

listed size (INCH or MM) will be applicable.

IMPORTANT NOTES :

For M35 = 40% & M42 = 80% extra

ITEM MARKED ARE EX-STOCK ITEMS. ALL REMAINING ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF RS 35,000/- NETT OR MOQ OF 3 NOS. PER SIZE WHICHEVER IS HIGHER.

For non listed intermediate sizes, the higher price of the nearest

DAGGER BRANDR

HSS TAPER SHANK EXTRA LONGMACHINE REAMERS

SIZE MM

PRICE (Rs.) EACH


SIZE PRICE (Rs.) EACHINCH MM MM

7/8 x 200 x 300

1 x 200 x 325

1.1/8 x 275 x 400

9/16 x 250 x 350

5/8 x 300 x 400

3/8 x 200 x 300

7/16 x 200 x 300

1/2 x 125 x 200

5/16 x 125 x 200

5/8 x 200 x 300

5/16 x 200 x 300

5/16 x 175 x 250

5/8 x 250 x 350

3/4 x 200 x 300

3/8 x 125 x 200

7/16 x 160 x 250

1/2 x 200 x 300

11/16 x 200 x 300

3/4 x 300 x 400

13/16 x 200 x 300

3/8 x 175 x 250

9/16 x 200 x 300

7/8 x 300 x 400

1 x 275 x 400

8 x 125 x 200 2120 8 x 175 x 250 2266 8 x 200 x 300 2485 9 x 225 x 300 3117 9 x 125 x 200 2069

14 x 160 x 250 3544

15 x 200 x 300 4227

16 x 300 x 400 4729

18 x 200 x 300 5242 19 x 200 x 300 5569

9 x 175 x 250 2382 10 x 125 x 200 2663

10 x 200 x 300 3014

12 x 160 x 250 3156

10 x 175 x 250 2840

10 x 300 x 400 3222

12 x 200 x 300 3325 13 x 200 x 300 3803

14 x 200 x 300 4162

15 x 300 x 400 4729 16 x 200 x 300 4227

17 x 200 x 300 4770

20 x 200 x 300 6180

22 x 200 x 300 7017

26 x 275 x 400 12653 25 x 275 x 400 10233 25 x 200 x 325 9111

28 x 275 x 400 14533

20 x 300 x 400 6981

7017

4227

4479

5928

5247

10233

4227

4523

3559

5569

3597

4729

8492

9111

15547

3325

3156

8313

2266

2663

2840

3014

2120

2485

ALL ABOVE ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF Rs. 35,000 / - NETT OR 5 NOS. PER SIZE WHICHEVER IS HIGHER.

IMPORTANT NOTES :For non listed intermediate sizes, the higher price of the nearest listed size (INCH or MM) will be applicable.

For M35 = 40% & M42 = 80% extra

31

DAGGER BRANDR

HSS TAPER PIN REAMERS (TAPER 1:50)HAND IS 5881 - 1984, MACHINE IS : 5918 - 1984

10 3574 40 23522

6 2380 30 11972

5 2380 25 8897

8 3222 32 13154

3 2380 16 5391

12 4314 50 40767

14 4843

4 2380 20 8385

NOMINALDIAMM

PRICE(Rs.)

EACH

NOMINALDIAMM

PRICE(Rs.)

EACH

HSS TAPER PIN REAMERS (TAPER 1:48) HAND/MACHINE - BS : 122 : 12 : 1964

1/4 2218 1/2 4037

3/16 2218 13/32 3468

9/32 2426 9/16 4667

5/16 2687 5/8 5192

7/32 2218 7/16 3571

11/32 3032 3/4 6543

3/8 3064 7/8 8074

NOMINALDIA

INCH

PRICE(Rs.)

EACH

NOMINALDIA

INCH

PRICE(Rs.)

EACH

HSS MACHINE JIG REAMERS IS : 11002-1989

SIZE MM

PRICE (Rs.) EACH

SIZE MM

PRICE (Rs.) EACH

10 2368 33 14465

14 3224 40 21965

12 2713 36 17872 13 3224 39 19108

11 2368 35 16658

17 4092 44 26963 19 4585 45 29279 20 5000 46 29279

22 5767 47 31921 23 5767 48 34716 24 7427 49 34716

15 3545 41 21965

25 8049 50 38595

16 3545 43 24539

27 8997 - -

28 9777 - -

32 12318 - - 30 10640 - -

32

R.H. Cutting with straigh flutes will be supplied as standard for hand taper pin Reamer.

Machine Taper Pin Reamer.

ALL REMAINING ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF RS. 35,000/- NETT MOQ OF 15 NOS. PER SIZE WHICHEVER IS HIGHER.

For M35 = 40% & M42 = 80% extra

R.H. Cutting with L.H. helical flutes will be supplied as standard for

Rs. 35,000 / - NETT OR 3 NOS. PER SIZE WHICHEVER IS HIGHER.

For non listed intermediate sizes, the higher price of the nearestlisted size (INCH or MM) will be applicable.

For M35 = 40% & M42 = 80% extra

ALL ABOVE ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF

IMPORTANT NOTES :

DAGGER BRANDR


SIZE MM

PRICE (Rs.) EACH


SIZE PRICE (Rs.) EACHINCH MM MM

3/8 x 200 x 300

3/4 x 300 x 400

1 x 275 x 400

7/16 x 160 x 250

7/8 x 300 x 400

1/2 x 200 x 300

11/16 x 200 x 300

7/16 x 200 x 300

3/8 x 175 x 250

5/16 x 200 x 300

1/2 x 125 x 200

9/16 x 250 x 350

5/8 x 200 x 300

13/16 x 200 x 300

5/16 x 175 x 250

7/8 x 200 x 300

3/4 x 200 x 300

1 x 200 x 325

9/16 x 200 x 300

1.1/8 x 275 x 400

3/8 x 125 x 200

5/8 x 250 x 350

5/8 x 300 x 400

5/16 x 125 x 200

13 x 200 x 300 3803

8 x 175 x 250 2266 8 x 200 x 300 2485

10 x 200 x 300 3014

12 x 160 x 250 3156

9 x 225 x 300 3117

25 x 275 x 400 10233

19 x 200 x 300 5569

25 x 200 x 325 9111

9 x 125 x 200 2069

10 x 175 x 250 2840

8 x 125 x 200 2120

10 x 300 x 400 3222

10 x 125 x 200 2663

12 x 200 x 300 3325

9 x 175 x 250 2382

16 x 200 x 300 4227

20 x 200 x 300 6180

15 x 300 x 400 4729 15 x 200 x 300 4227

14 x 160 x 250 3544 14 x 200 x 300 4162

17 x 200 x 300 4770

20 x 300 x 400 6981 22 x 200 x 300 7017

18 x 200 x 300 5242

16 x 300 x 400 4729

26 x 275 x 400 12653 28 x 275 x 400 14533

2266

3014

2663

2485

2120

4729

5928

4227

4523

5247

2840

3156

3325

3559

3597

4479

4227

5569

7017

8313

9111

8492

10233

15547



For M35 = 40% & M42 = 80% extra


For non listed intermediate sizes, the higher price of the nearest IMPORTANT NOTES :

31

DAGGER BRANDR

HSS TAPER PIN REAMERS (TAPER 1:50)HAND IS 5881 - 1984, MACHINE IS : 5918 - 1984

6 2380 30 11972

8 3222 32 13154

10 3574 40 23522

3 2380 16 5391

4 2380 20 8385

12 4314 50 40767

14 4843

5 2380 25 8897

NOMINALDIAMM

PRICE(Rs.)

EACH

NOMINALDIAMM

PRICE(Rs.)

EACH

HSS TAPER PIN REAMERS (TAPER 1:48) HAND/MACHINE - BS : 122 : 12 : 1964

9/32 2426 9/16 4667

5/16 2687 5/8 5192

11/32 3032 3/4 6543

3/16 2218 13/32 3468

1/4 2218 1/2 4037

3/8 3064 7/8 8074

7/32 2218 7/16 3571

NOMINALDIA

INCH

PRICE(Rs.)

EACH

NOMINALDIA

INCH

PRICE(Rs.)

EACH

HSS MACHINE JIG REAMERS IS : 11002-1989

SIZE MM

PRICE (Rs.) EACH

SIZE MM

PRICE (Rs.) EACH

10 2368 33 14465 11 2368 35 16658 12 2713 36 17872 13 3224 39 19108 14 3224 40 21965

25 8049 50 38595

17 4092 44 26963 19 4585 45 29279

30 10640 - -

16 3545 43 24539

28 9777 - -

15 3545 41 21965

24 7427 49 34716

27 8997 - -

22 5767 47 31921

20 5000 46 29279

23 5767 48 34716

32 12318 - -

32

For M35 = 40% & M42 = 80% extra

Machine Taper Pin Reamer.

ALL REMAINING ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF RS. 35,000/- NETT MOQ OF 15 NOS. PER SIZE WHICHEVER IS HIGHER.

R.H. Cutting with straigh flutes will be supplied as standard for hand taper pin Reamer. R.H. Cutting with L.H. helical flutes will be supplied as standard for


For M35 = 40% & M42 = 80% extra


IMPORTANT NOTES :For non listed intermediate sizes, the higher price of the nearestlisted size (INCH or MM) will be applicable.

DAGGER BRANDR

HSS MACHINE BRIDGE REAMERS - IS 5919

PRICE (Rs.)

EACH

SIZE MM

PRICE (Rs.)

EACH

SIZE MM

PRICE (Rs.)

EACH

SIZE MM

MORSETAPER NO

PARALLEL SHANKPRICE (Rs) EACH

TAPER SHANKPRICE (Rs) EACH

HSS MACHINE BRIDGE REAMERS BS: 122 (Part 2) : 1964

SIZEINCH

PRICE(Rs.)

EACH

SIZEINCH

PRICE(Rs.)

EACH

SIZEINCH

PRICE(Rs.)

EACH

HSS SOCKET REAMERS : PARALLEL SHANK - IS : 5882 / TAPER SHANK - IS 5807. TYPE ' A ' (ROUGHING), TYPE ' B ' (PRE - FINISHING ) ,

TYPE ' C ' (FINISHING )

Type required to be specified in order.

4 9375 11167

2 3900 4728

5 19108 20525

3 5667 7090

1 2801 3186

6 33718 47013

0 2544 3021

11 2815 20 6338 31 12117

17.5 5136 28 10190 49 40722

13.5 3587 23 7681 36 14925

11.5 3290 21 7042 32 12117

12 3290 21.5 7042 33 13037

13 3587 22 7042 35 13985

14 3587 23.5 7681 37 15909

17 5136 27 9415 43 29940

19 5767 30 11000 - -

15 4162 25.0 8352 40 25296

For M35 = 40% & M42 = 80% extra


IMPORTANT NOTES :For non listed intermediate sizes, the higher price of the nearest

Rs. 35,000 / - NETT OR 5 NOS. PER SIZE WHICHEVER IS HIGHER.ALL ABOVE ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF

7/16 2815 13/16 6125 1.3/16 10560

9/16 3587 15/16 7681 1.5/16 12471

5/8 4162 1 8352 1.3/8 13368

1/2 3044 7/8 7042 1.1/4 11781

11/16 5136 1.1/16 9089 1.7/16 14289

3/4 5767 1.1/8 9764 1.1/2 15909

33

DAGGER BRANDR

HSS SHELL REAMERS IS : 5926 : 1970 (WITH 1: 30 TAPER HOLE)

SIZEMM

PRICE(Rs.)

EACH

SIZEMM

PRICE(Rs.)

EACH

SIZEMM

PRICE(Rs.)

EACH

HSS COUNTERSINKS WITH TAPER SHANK BS: 122 (PART 2): 1964 (INCLUDED ANGLE 60 OR 90)

BODYDIA

INCH

PRICE(Rs.)

EACH

BODYDIA

INCH

PRICE(Rs.)

EACH

BODYDIA

INCH

PRICE(Rs.)

EACH

HSS TAPER SHANK COUNTERBORES IS : 5710 - 1988

CUTTERDIA MM

PRICE (Rs.) EACH

CUTTERDIA MM

PRICE (Rs.) EACH

34

28 4151 50 8173 79 23462

23 3651 44 6998 68 17139

26 3870 47 7646 73 19058

21 3651 42 6898 66 15621

24 3651 45 7300 70 17139

36 5266 58 11135 91 35142

40 5821 63 13454 98 42411

27 3870 49 7852 76 20913

39 5821 62 13454 95 36736

41 6080 65 15621 99 46948

38 5545 60 11135 92 35142

33 4804 56 9932 85 27739

100 46948

22 3651 43 6898 67 17139

25 3651 46 7300 72 19058

32 4575 54 9051 82 25717

35 5055 57 9932 89 29712

30 4370 52 9051 80 25717

3/4 2928 1.3/8 8848 2.1/2 25423

1 4652 1.3/4 15506 3 36290

5/8 2585 1.1/4 7568 2.1/4 20485

1/2 1946 1.1/8 6013 2 18069

7/8 3697 1.1/2 10486 2.3/4 30007

13.5 2956 34 13954

16.5 3793 37 15804 17.5 4080 39 17123

22.0 5781 46 21857 23.0 6634 48 23726

19.5 4818 41 18569 20.0 5049 43 19198

26.0 8900 53 29096 25.0 8031 51 26782

28.0 9940 55 32029 29.0 10478 57 35190

14.5 3303 36 15166

31.0 11424 59 38993 33.0 13088 61 43443

Counterbores will be supplied without pilots and grub screws.Pilot holes and grub screw holes, will however, be provided.

IMPORTANT NOTES :For non listed intermediate sizes, the higher price of the nearest


For M35 = 40% & M42 = 80% extra



DAGGER BRANDR

HSS TAPER SHANK COUNTER BORES BS : 122 (PART 2) : 1964

CONTERBOREDIA

INCH

PRICE (Rs.) EACH

CONTERBOREDIA

INCH

PRICE (Rs.) EACH

HSS CYLINDRICAL CUTTER IS : 6309

DIAMM

BOREMM

WIDTHMM

PRICE(Rs.)

EACH

DIAMM

BOREMM

WIDTHMM

PRICE(Rs.)

EACH

HSS HELICAL CYLINDRICAL CUTTERS BS: 122 (PART 1) : 1953

PRICE (Rs.) EACH

LENGTH OFCUTTER INCH 3 4 5

DIAMETER OF CUTTER

35

5/8 3599 1.3/8 13954

1/2 2593 1.1/8 9940 9/16 3224 1.1/4 11424

11/16 4080 1.1/2 16209 3/4 4585 1.5/8 18579 13/16 5083 1.3/4 21049 7/8 5781 1.7/8 23383

1 8031 - - 15/16 6793 2 25817

us.

1. Counterbores upto and including 1/2" dia. Are supplied without

3. For non listed intermediate sizes, the higher price of the nearest

grub screw holes. The pilots & grub screws will not be supplied by

time of order.

IMPORTANT NOTES :

2. Counterbores above 1/2" dia. Will be provided with pilot holes and

integrated pilots, the diameter of which should be specified at the


40 16 20 2640 80 32 80 12802

40 16 32 3300 80 32 100 14739

40 16 50 4107 100 40 40 10639

50 22 63 5258 100 40 125 34166

80 32 63 10819 - - - -

40 16 70 5506 100 40 70 16114

80 32 36 6806 160 60 125 85337

63 27 32 4817 125 50 80 34066

50 22 40 4004 100 40 110 28047

63 27 70 7992 125 50 125 51288

63 27 50 6072 125 50 110 45846

50 22 25 3381 100 40 90 19964

50 22 80 6806 125 50 50 24015

63 27 90 9383 125 50 140 57046

3 15202 23587 39615 4 20442 30038 49855

2 12009 17633 29407

5 29535 43454 59935 6 37451 51134 70269

IMPORTANT NOTEALL ABOVE ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF Rs. 35,000 / - NETT OR 3 NOS. PER SIZE WHICHEVER IS HIGHER.

For M35 = 40% & M42 = 80% extra

DAGGER BRANDR

HSS HIGH POWER CYLINDRICAL CUTTERS BS: 122 (PART 1) : 1953

LENGTH OFCUTTER INCH 2.1/2 3 3.1/2 4 4.1/2

DIAMETER OF CUTTER

ALL ABOVE ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF Rs.35,000 / - NETT OR 3 NOS. PER SIZE WHICHEVER IS HIGHER.

IMPORTANT NOTE

For M35 = 40% & M42 = 80% extra

PRICE (Rs.) EACH

HSS SIDE & FACE CUTTERS - IS : 6308 - 1982

STRAIGHTTEETH TYPE "B"

STAGGEREDTEETH TYPE "A"

PRICE (Rs.) EACH

DIAMM

BOREMM

WIDTHMM

50 16

63 22

80 27

16 8511 10123

12 5236 6865

18 5236 7069

20 13669 18339

10 9565 12938

8 4600 5668

20 6767 8927

12 7515 9173

20 9775 10989

14 11807 14350

16 4910 6865

16 5826 7515 18 6487 8511

6 4150 5210

10 4910 6487

22 15094 19929

8 8927 11118

16 12309 14904

10 7011 8252

22 10233 12565

6 5933 7194

14 5569 7366

8 6343 7700

25 11119 13701

14 7962 9383

6 8317 10319

12 10900 13433

18 13200 16999

18 9078 10407

25 16506 20724 28 18587 23725

6 3215 4004 5 3094 3849

8 3300 4115 10 3505 4380 6 3791 4899 8 4004 5345 10 4357 5506 12 4544 5933 14 4681 6365

100 32

100

125

125 32

1 4303 5426 6014 7604 10965

4 10562 14420 18026 24223 34066

5 12735 20277 26510 33631 41941

8 19911 34416 41743 53392 65766

3 8478 11344 14002 19006 26008

2 6372 8352 10028 13312 18412

6 14904 30129 31546 39317 49843

7 17004 30129 36643 46874 58364

36

DAGGER BRANDR

HSS SIDE & FACE CUTTERS - IS : 6308 - 1982

STRAIGHTTEETH TYPE "B"

STAGGEREDTEETH TYPE "A"

PRICE (Rs.) EACH

DIAMM

BOREMM

WIDTHMM

150

200 40

225

160

160 40

200

250

37

8 19451 21533

10 11947 15175 12 13837 17478

22 19658 24226

6 13774 15384 8 14641 16356

16 18236 20209

25 23436 28740 28 25094 29927 32 27316 32629

6 18026 19994

18 17707 21866

10 15509 17324

14 14798 18587

8 11012 14082

28 23349 29257

18 19528 22360

25 50169 57145

14 17222 19246

6 10123 13017

16 15769 19712

20 17707 21866

25 21551 26682

32 25094 31919

12 16359 18268

20 20504 22360 22 21713 24786

10 21051 23664

14 25916 28626

18 30709 34618 20 31044 35673

28 39049 45257 32 43405 50725

10 27591 29862

25 37091 42612

12 32121 35053 14 34433 37899

16 27519 30531

16 36785 40715

12 24332 26754

18 41498 47185 20 41498 47185

22 33900 38804

8 25347 27722

22 45812 52249

28 54625 61765 32 59074 66361

10 31901 34274 12 37315 40864 14 40399 44033 16 43375 47185 18 49028 54585

28 65028 72884 32 70180 79925

20 49028 54585 22 54258 60490 25 59821 65871

WHILE ORDERING.


IMPORTANT NOTE

BORE REQUIRED FOR THESE SIZES TO BE SPECIFIED

DAGGER BRANDR

HSS STRAIGHT TEETH SIDE & FACE CUTTERS BS : 122 (PART 1) : 1953

WIDTH OFCUTTER EDGE& BOSS INCH

2.1/2" 3" 31/2" 4" 5"

DIAMETER OF CUTTER

PRICE (Rs) EACH

HSS STRAIGHT TEETH SIDE & FACE CUTTERS BS : 122 (PART 1 ) : 1953


6" 7" 8" 9" 10"

DIAMETER OF CUTTER

PRICE (Rs) EACH

HSS STAGGERED TEETH SIDE & FACE CUTTERS BS : 122 (PART 1 ) 1953


3" 4" 5" 6" 7"

DIAMETER OF CUTTER

PRICE (Rs) EACH

8"

38

5/16 3971 4414 5275 6343 8927

1/4 3791 4201 4992 5917 8317

7/16 4338 4899 5942 7194 10233

3/4 5181 6072 7568 9383 13669

3/8 4150 4682 5610 6767 9565

5/8 4850 5656 6909 8511 12309

7/8 5528 6758 8159 10233 15094

1 5917 7302 8975 11118 16506

1/2 4524 5158 6234 7515 10900

1.1/2 7410 9214 11441 13919 21688

1.1/4 6651 8063 10153 12637 19063

5/16 11012 16243 19451 25346 -

1.1/4 25094 34838 43397 59074 70180

5/8 15762 22546 27519 36785 43375

3/4 17707 25003 30710 40756 49028

7/16 12891 18644 22688 29739 34285

1.1/2 28626 39794 49704 68003 81379

1 21550 29944 37091 50168 59822

1/4 10123 15011 18026 23220 -

1/2 13837 20138 24331 32122 37314

7/8 19657 27489 33901 45812 54259

1.3/4 - - - 83393 98826

3/8 11947 17476 21051 27591 31901

3/4 7714 11553 17005 21866 30313 34723

7/8 8412 12565 19712 24226 33352 38804

5/16 5610 7700 11119 14082 19517 21533

3/8 6269 8159 12938 15175 21052 23664

5/8 7261 10123 14904 19712 27100 30531

7/16 6372 8658 13166 16308 22106 25211

1 9078 13699 20724 26664 36332 42601

1/2 6487 9172 13433 17478 23106 26754

1/4 5275 7194 10319 13017 17005 20021

For M35 = 40% & M42 = 80% extra

WHILE ORDERING.

IMPORTANT NOTE :Cutter of width of 3/4" and above will be supplied with Left hand Helical Flutes.



DAGGER BRANDR

HSS STRAIGHT TEETH SIDE & FACE CUTTERS BS : 122 (PART 1) : 1953


2.1/2" 3" 31/2" 4" 5"

DIAMETER OF CUTTER

PRICE (Rs) EACH

HSS STRAIGHT TEETH SIDE & FACE CUTTERS BS : 122 (PART 1 ) : 1953


6" 7" 8" 9" 10"

DIAMETER OF CUTTER

PRICE (Rs) EACH

HSS STAGGERED TEETH SIDE & FACE CUTTERS BS : 122 (PART 1 ) 1953


3" 4" 5" 6" 7"

DIAMETER OF CUTTER

PRICE (Rs) EACH

8"

38

1/2 4524 5158 6234 7515 10900

1/4 3791 4201 4992 5917 8317

5/16 3971 4414 5275 6343 8927

3/8 4150 4682 5610 6767 9565

7/16 4338 4899 5942 7194 10233

5/8 4850 5656 6909 8511 12309

3/4 5181 6072 7568 9383 13669

7/8 5528 6758 8159 10233 15094

1.1/4 6651 8063 10153 12637 19063

1.1/2 7410 9214 11441 13919 21688

1 5917 7302 8975 11118 16506

7/8 19657 27489 33901 45812 54259

5/16 11012 16243 19451 25346 -

3/4 17707 25003 30710 40756 49028

1/2 13837 20138 24331 32122 37314

1/4 10123 15011 18026 23220 -

3/8 11947 17476 21051 27591 31901

7/16 12891 18644 22688 29739 34285

5/8 15762 22546 27519 36785 43375

1 21550 29944 37091 50168 59822

1.1/4 25094 34838 43397 59074 70180

1.1/2 28626 39794 49704 68003 81379

1.3/4 - - - 83393 98826

3/8 6269 8159 12938 15175 21052 23664

5/16 5610 7700 11119 14082 19517 21533

3/4 7714 11553 17005 21866 30313 34723

7/16 6372 8658 13166 16308 22106 25211

1/2 6487 9172 13433 17478 23106 26754

7/8 8412 12565 19712 24226 33352 38804

1 9078 13699 20724 26664 36332 42601

1/4 5275 7194 10319 13017 17005 20021

5/8 7261 10123 14904 19712 27100 30531

WHILE ORDERING.



For M35 = 40% & M42 = 80% extra

IMPORTANT NOTE :Cutter of width of 3/4" and above will be supplied with Left hand Helical Flutes.

DAGGER BRANDR

HSS STAGGERED TEETH SIDE & FACE CUTTERS BS : 122 (PART 1) : 1953


9" 10"

DIAMETER OF CUTTER

PRICE (Rs) EACH

HSS SINGLE ANGLE CUTTERS IS : 6324 - 1971

DIAMM

BOREMM

WIDTHMM

ANGLEDEGREES

PRICE (Rs)EACH

HSS SINGLE ANGLE CUTTERS - BS : 122 (PART 1) : 1953

WIDTH OFCUTTER INCH

ANGLEDEGREES

PRICE (Rs) EACH

DIAMETER OF CUTTER

2.3/4" 3"

HSS DOUBLE ANGLE CUTTERS BS : 122 (PART 1) : 1953

HSS EQUAL ANGLE CUTTER - BS : 122 (PART 1) : 1953

2.3/4 1 5/8 4201 3 1.1/4 3/4 5275

Angle in degrees

DIA INCH

PRICE (Rs) EACH

Angle required to be specified at the time of order.

BOREINCH

WIDTHINCH

WIDTH OFCUTTER

INCH PRICE (Rs) EACH

INCLUDEDANGLE INDEGREES

DIAMETER OF CUTTER

2.3/4" 3"

39

3/8 29862 34274

7/16 32865 35851

5/16 27722 31753

1/2 35098 40864

7/8 52249 60490

1.1/4 66361 79925

1.1/2 75853 91836

1.3/4 92520 110358

5/8 40715 47185

3/4 47185 54585

1 54242 65871


BORE REQUIRED FOR THESE SIZES TO BE SPECIFIED WHILE


For M35 = 40% & M42 = 80% extra

IMPORTANT NOTES :

ORDERING.

63 22 18 60, 65, 70, 75, 80 & 85 4357

63 22 26 70, 75 & 80 5180

80 22 32 70, 75 & 80 6806

50 16 12 60, 65, 70, 75, 80 & 85 2923

100 27 36 70, 75 & 80 10211


For M35 = 40% & M42 = 80% extra

5/8 50 , 60 , 70 , 80 4681 5275

5/16 30 3623 4005

7/16 30 , 40 3971 4530

1/2 45 , 50 , 60 , 70 , 80 4201 4743


For M35 = 40% & M42 = 80% extra


1/2 45 , 60 , 90 3791 4201 5/8 60 , 90 4201 4599

7/16 30 , 40 3791 4201 5/16 30 , 40 3623 4005

DAGGER BRANDR

HSS EQUAL ANGLE CUTTERS - IS : 6326

DIAMM

BOREMM

WIDTHMM

ANGLEDEGREES

PRICE (Rs) EACH

45

60

90

HSS DOUBLE (Unequal) ANGLE CUTTER - IS 6325

DIAMM

BOREMM

WIDTHMM

ANGLEDEGREES

PRICE (Rs) EACH

50 16 12

50 16 14

50 16 16

63 22 18

63 22 22

63 22 20

80 22 32

100 27 36

60 X 15 3215

55 X 12 3215

70 X 15 3215

75 X 15 3215

90 X 20 3506

60 X 15 4401

90 X 20 4609

70 X 15 4401

65 X 15 6806

70 X 15 6806

75 X 15 6806

80 X 15 4401

75 X 15 4401

100 X 25 4983

70 X 15 10211

65 X 15 3215

100 X 25 3791

55 X 12 4401

80 X 15 3215

63 X 15 4401

75 X 15 10211

80 X 15 10211

80 22 20

56 16 14

63 22 12

63 22 18

56 16 10

100 27 28

80 22 22

80 22 16

63 22 16

100 27 25

100 27 18

56 16 12 3363

5427

3623

6686

4005

4993

7822

3215

3623

4201

8478

4599


For M35 = 40% & M42 = 80% extra


40

DAGGER BRANDR

HSS CONVEX CUTTERS IS : 6323 : 1982 DIA MM

PRICE (Rs) EACH

BOREMM

WIDTHMM

RADIUSMM

HSS CONCAVE CUTTERS IS : 6322 : 1982 DIA MM

PRICE (Rs) EACH

BOREMM

WIDTHMM

RADIUSMM

HSS CONVEX / CONCAVE CUTTERS : BS : 122 (PART 1) : 1953

DIA OF

CUTTER

INCH

PRICE (Rs)

EACH

DIA OF

CURCLE

INCH

DIA OF

BORE

INCH

CONVEX CUTTER CONCAVE CUTTER

WIDTH OFCONCAVECUTTER

INCH

WIDTH OFCONVEXCUTTER

INCH

PRICE (Rs)

EACH

41

63 22 10 5 5345

90 27 20 10 8927

125 40 40 20 24894

90 27 22 11 9838 90 27 24 12 10542

50 22 3 1.6 3860 50 22 4 2 3860 56 22 5 2.5 4569 56 22 6 3 4569 63 22 8 4 4850

70 22 12 6 5762 70 22 16 8 6343 90 27 18 9 8478

100 27 28 14 13445 110 32 32 16 17005 110 32 36 18 22448

80 27 32 8 11241

125 32 62 18 37796

56 22 8 1.6 4850 56 22 9 2 5096 56 22 10 2.5 5243

70 22 28 7 8600

63 22 16 4 5860

90 27 40 10 14904 100 27 42 11 17381 100 27 44 12 17966

100 27 50 14 20155

90 27 36 9 13433

63 22 20 5 6875 70 22 24 6 8195

63 22 12 3 5696

100 27 46 12.5 18316

110 32 56 16 27744

125 32 70 20 39794

2.1/4

4

2.3/4

3

4.1/4

3.1/2

2.1/2

3.1/4

7/16

3/16 1/8

1/4

5/16 3/8

1/2

9/16 5/8

11/16 3/4

15/16 1

1.1/8

7/8 13/16

1.3/8

1.1/4

1.1/2

1

1

1

1

1.1/4

1.1/4

1

1

1.3/8 20368 2.5/16 26560

15/16 9999 1.3/4 15232

3/4 7410 1.3/8 10699

13/16 8383 1.9/16 12802

1.1/8 13445 1.15/16 18886

11/16 7069 1.3/8 10535

7/8 8927 1.9/16 13017

1 10458 1.3/4 15448

1.1/4 14798 2.1/8 20155

1.1/2 22033 2.1/2 30436

1/8 4107 5/16 4850 3/16 4380 3/8 5028 1/4 4577 1/2 5358 5/16 4850 5/8 5870

7/16 5355 7/8 6875 1/2 5766 1 7332

3/8 5168 3/4 6365

9/16 5870 1.3/16 8600 5/8 6372 1.3/16 8819

ALL ABOVE ITEMS WILL ATTRACT MINIMUM ORDER VALUE OFRs. 35,000 / - NETT OR 3 NOS. PER SIZE WHICHEVER IS HIGHER.

For M35 = 40% & M42 = 80% extra

DAGGER BRANDR

HSS SINGLE / DOUBLE CORNER ROUNDING CUTTERS BS : 122 (PART 1) : 1953

DIA OF

CUTTER

INCH

PRICE (Rs)

EACH

CORNERRADIUS

INCH

DIA OF

BORE

INCH

SINGLE CUTTER DOUBLE CUTTER

WIDTHOF

CUTTERINCH

WIDTHOF

CUTTERINCH

PRICE (Rs)

EACH

HSS SINGLE CORNER ROUNDING CUTTERS IS : 6314 - 1982

DIA MM

PRICE (Rs) EACH

BOREMM

WIDTHMM

RADIUSMM

42

2.1/4

2.3/4

3.1/2

3.1/4

2.1/2

3.3/4

3

1/8

3/16 7/32 1/4

9/32 5/16

13/32

11/32

15/32

9/16

1/16

7/16

1/2

5/8

11/16 3/4

3/32

3/8

5/32

1

1

1

1

1

1

1

7/16 4850 5/8 6842

1.1/8 15538 1.7/8 22255

7/8 9593 1.3/8 14082

3/4 8071 1.3/16 11663

5/16 4303 7/16 6083

5/16 4303 7/16 6083

7/16 4850 5/8 6842 1/2 5126 3/4 7332

5/8 6014 15/16 8724

5/16 4303 7/16 6083

1/2 5126 3/4 7332

5/8 6014 15/16 8724 11/16 7127 1.1/16 10159 11/16 7127 1.1/16 10159

3/4 8071 1.3/16 11663

7/8 9593 1.3/8 14082 1 10562 1.5/8 15752 1 10562 1.5/8 15752 1.1/8 15538 1.7/8 22255

For M35 = 40% & M42 = 80% extra


125 32 31 18 22795

90 27 18 9 8892

80 27 16 8 7366

56 22 4 1.6 4107

63 22 10 5 5289

70 22 14 7 5942

90 27 20 10 9660

56 22 5 2.5 4107

63 22 6 3 4743

70 22 12 6 5656

63 22 8 4 4963

100 27 22 12 15663

100 27 22 12.5 15663

100 27 25 14 16590

110 32 28 16 17826

125 32 35 20 24236


For M35 = 40% & M42 = 80% extra

DAGGER BRANDR

HSS PARALLEL SHANK END MILL IS : 6353(STANDARD SERIES)

DIA MM OAL (MM)

PRICE (Rs.)EACH

IS : 6353 - 1971 IS : 6353 - 1991

CEL (MM)CEL (MM) OAL (MM)

43

17 1315 32 88 32 92

10 804 22 67 22 72

7 804 - - 16 60

26 2219 45 116 45 121

4 640 11 43 11 43

6 715 16 52 13 57

3.5 640 - - 10 42

3 640 10 42 8 40

11 804 22 67 22 79

12 831 26 76 26 83

14 1030 26 76 26 83

5 640 13 47 13 47

8 804 - - 19 63

9 804 - - 19 69

13 939 26 76 26 83

16 1203 32 88 32 92

18 1462 32 88 32 92

19 1462 32 88 32 92

20 1617 38 101 38 104

21 1815 38 101 38 104

22 1835 38 101 38 104

24 1990 38 101 45 121

25 2140 45 116 45 121

27 2610 45 116 45 121

28 3045 45 116 45 121

30 3351 45 116 45 121

32 3655 63 140 53 133

29 3045 45 116 45 121

33 4049 63 140 53 133

35 4414 70 160 53 133

37 5187 70 160 53 133

39 5864 70 160 63 155

40 6228 70 160 63 155

43 7090 80 180 63 155

45 7942 80 180 63 155

46 7942 90 200 63 155

41 6228 70 160 63 155

38 5529 70 160 63 155

49 8736 90 200 75 177

36 4813 70 160 53 133

50 9611 90 200 75 177

54 14016 100 220 75 177

57 19602 100 220 75 177

63 21787 110 250 90 192

53 11831 90 200 75 177

61 20929 110 250 90 192

51 9611 90 200 75 177

56 16854 100 220 75 177

59 19602 100 220 75 177

1. For non-listed intermediates sizes, the higher price of the nearest listed size will be applicable.

IMPORTANT NOTES :

ITEM MARKED ARE EX-STOCK ITEMS ALL REMAINING ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF RS. 35,000/- NETT MOQ OR 3 NOS. PER SIZE. WHICHEVER IS HIGHER.

For M35 = 40% & M42 = 80% extra

3. Long series End Mills, if required, can be supplied at 30 % extra subject to the order value being minimum Rs. 35,000/- NETT,

2. LH End Mill Dia 17 mm & above on special request - 25 % extra

per size or minimum 3 Nos. per size whichever is higher.

DAGGER BRANDR

HSS TAPER SHANK END MILLS IS : 6354 (STANDARD SERIES)

DIA

MM

MTNo.

IS:6354-1971 TANGED ENDPRICE (Rs)

EACH

IS:6354-1991 TAPPED END

CEL (MM) OAL (MM) CEL (MM) OAL (MM)

44

6 1065 16 90 13 83 1

10 1153 22 96 22 92 1

30 4979 53 165 45 147 3 28 4527 45 157 45 147 3

44 11189 63 203 63 188 4 43 10709 - - 63 221 5

26 4048 45 157 45 147 3

32 5286 53 183 53 178 4

7 1065 - - 16 86 1

25 3251 45 157 45 147 3

51 20100 - - 75 233 5

40 9741 63 203 63 221 5

50 14345 75 250 75 233 5

16 1865 32 124 32 117 2

36 7616 70 210 53 155 3

14 1863 26 118 26 111 1

36 8309 - - 53 178 4

46 12757 - - 63 221 5

51 14345 75 250 75 200 4

48 12757 63 203 75 200 4

11 1267 - - 22 92 1

22 2759 38 130 38 123 2

33 7009 - - 53 178 4

22 3010 - - 38 140 3

33 6391 53 165 53 155 3

20 2629 38 130 38 123 2

35 7009 - - 53 178 4

8 1065 19 93 19 89 1 9 1153 - - 19 89 1

12 1654 26 118 26 111 1

20 2873 38 150 38 140 3

35 7009 53 165 53 155 3

12 1267 26 100 26 96 1

18 2277 32 124 32 117 2

41 9741 63 203 63 188 4

38 8378 63 203 63 188 4 38 9741 - - 63 221 5

32 5286 53 165 53 155 3

41 10709 - - 63 221 5

14 1750 26 100 26 96 2

40 9741 63 203 63 188 4

43 10709 63 203 63 188 4

44 11189 - - 63 221 5 45 12033 63 203 63 188 4 45 12033 - - 63 221 5 46 12316 63 203 63 188 4

48 14345 - - 75 233 5 50 14345 75 215 75 200 4

53 20101 75 250 75 200 4

56 25399 - - 75 233 5 56 25399 75 250 75 200 4

60 26657 - - 75 200 4 60 26657 75 250 75 233 5 63 31963 90 265 90 248 5

53 25401 - - 75 233 5

4. Left Hand Cutter at 25 % extra.

For M35 = 40% & M42 = 80% extra

unless otherwise specified. IMPORTANT NOTES :

1. Standard Series Type 'B' Tapped End as per IS:6354 - 1971at the

supplied at 30 % extra subject to the order value being minimum

3. For non-listed intermediates sizes, the higher price of the nearest listed size will be applicable subject to order value being minimum. Rs.35.00/- per size or minimum 3 Nos. each whichever is higher.

Dia 6.0 mm to 12.0 mm in Tapped End & Tanged End Not Possible


These sizes will be supplied with the smaller MT Shank

THE FOLLOWING IF REQUIRED, CAN BE SUPPLIED SUBJECT TO THE ORDER VALUE BEING Rs. 35,000/- NETT OR 3 NOS. PER SIZE WHICHEVER IS HIGHER.

same rate. 2. Long Series End Mill, Tanged End or Tapped End if required can be

Rs. 35,000/- per size or minimum 3 Nos. each whichever is higher.

DAGGER BRANDR

HSS END MILLS BS : 122 ( PART 1) 1953

DIA INCH

PARALLELSHANK

PRICE (Rs.)EACH

TAPERSHANK

PRICE (Rs.)EACH

45

1.1/4 3655 5286

7/16 804 1122

1 2140 3225

1.1/2 5168 8378

5/32 640 994

2.3/8 20929 27716

11/16 1345 2103

13/16 1617 2522

1.3/4 7942 11189

1.5/8 6228 9741

3/16 640 994

9/32 804 1018

2.5/16 19602 -

2.1/2 23597 31963

7/32 640 994

3/8 804 1107

1.3/8 4414 7009

2 9590 14345

9/16 1030 1750

1.1/8 3045 4498

1/4 715 994

5/16 804 1018

15/16 - 2999

5/8 1203 1865

1/8 640 994

1/2 831 1267

3/4 1462 2220

7/8 1835 2762

1.7/8 8757 12757

2.1/16 11831 -

2.1/8 14016 19880

2.3/16 16854 -

2.1/4 18235 25397

4. For M35 = 40% & M42 = 80% extra

Tanged End.

size.2. Intermediate sizes (non-listed) price of the next larger listed

in case of Taper Shank End Mill Dia 11/16" & above with MOQ.

IMPORTANT NOTES :

3. Left Hand Cutter at 25 % extra.

1. Taper Shank End Mills with Tapped End for size 9/16" and over, if required, can be supplied at the same rate as the

ITEM MARKED ARE EX-STOCK ITEMS ALL REMAINING ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF RS. 35,000/- NETT MOQ OR 3 NOS. PER SIZE. WHICHEVER IS HIGHER.

DAGGER BRANDR

HSS PARALLEL SHANK SLOT MILLING CUTTERS IS : 6352 (SHORT SERIES)

DIA MM

PRICE (Rs) EACH CEL (MM) OAL (MM) CEL (MM) OAL (MM)

IS:6352-1971 IS:6352-1991

46

14 1203 16 63 16 73

3 776 6 40 5 37

3.5 776 6 40 6 38

4 776 6 40 7 39

6 831 8 45 8 52

7 831 10 50 10 54

5 776 8 45 8 42

8 831 10 50 11 55

9 831 10 50 11 61

10 862 12 56 13 63

11 862 12 56 13 70

12 941 16 63 16 73

25 2306 25 100 26 102

38 5574 36 125 38 130

40 5965 36 125 38 130

42 6746 - - 38 130

41 6746 - - 38 130

35 4813 32 118 32 112

44 7501 - - 38 130

28 3820 25 100 26 102

16 1354 18 70 19 79

36 5168 32 118 32 112

45 7501 - - 38 130

32 4002 28 110 32 112

46 8329 - - 38 130

18 1667 18 70 19 79

47 8329 - - 38 130

48 8329 - - 45 147

49 9133 - - 45 147

22 1943 22 90 22 88

50 9133 - - 45 147

20 1667 20 80 22 88

43 7501 - - 38 130

ITEM MARKED ARE EX-STOCK ITMS ALL REMAINNING ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF RS. 35,000/- NETT MOQ OR 5 NOS. PER SIZE. WHICHEVER IS HIGHER.

IMPORTANT NOTES :

4. Standard Series Slot Milling Cutter if required can be 3. Left Hand Cutter at 25 % extra.

is higher. 5. For M35 = 40% & M42 = 80% extra

1. Type 'A' will be supplied unless otherwise specified.

IS : 6352 - 1971 1) TYPE 'A' - FLATE FACE HELICAL FLUTED

supplied a 30 % extra, subject to the order value being minimum Rs. 35,000/- NETT. Or 5 Nos. per size whichever

2. Other Type if required can be supplied at the same rate.

IS : 6352 - 1991 1) TYPE 'A' - FLATE FACE HELICAL FLUTED

DAGGER BRANDR

HSS TAPER SHANK SLOT MILLING CUTTERS IS : 6388 (SHORT SERIES)

DIA MM

PRICE (Rs.)EACH

IS : 6388 - 1971

CELMM

(TANGEDEND)

OALMM

(TAPPEDEND)

OALMM

CELMM

OALMM

IS : 6388 - 1991 MTNO.

(TAPPED END)

47

20 2745 20 - - 22 124 3

25 3284 25 143 130 26 128 3

36 8696 32 179 164 32 134 3

28 4800 25 143 130 26 128 3

32 6937 - - - 32 157 4

35 7457 32 179 164 32 134 3

36 8696 - - - 32 157 4

40 13208 - - - 38 196 5

38 8696 36 186 171 38 163 4

38 11971 - - - 38 196 5

32 5755 28 148 135 32 134 3

35 8634 - - - 32 157 4

40 9925 36 186 171 38 163 4

20 2220 20 114 104 22 107 2

22 2758 22 118 108 22 107 2

18 2220 18 110 100 19 104 2

26 4531 25 143 130 26 128 3

22 3286 - - - 22 124 3

12 1487 16 90 - 16 86 1

6 1186 - - - 8 78 1

7 1186 16 90 - 10 80 1

8 1304 16 90 - 11 81 1

9 1304 16 90 - 11 81 1

10 1332 16 90 - 13 83 1

11 1332 16 90 - 13 83 1

12 1740 - - - 16 101 2

14 1865 16 90 - 16 86 1

14 1936 - - - 16 101 2

16 1936 18 110 100 19 104 2


For M35 = 40% & M42 = 80% extra

nearest listed size will be applicable.

2. Other Type if required can be supplied at the same rate.

otherwise specified.

1. Type 'A' (IS:6388 - 1971) and Type 'D' (IS:6388 - 1991)

IS : 6352 - 1991 1) TYPE 'D' - FLATE FACE HELICAL FLUTED

be supplied at 30 % extra.

2) TYPE 'B' & 'F' - FLATE FACE STRIGHT FLUTED

3. For non-listed intermediates sizes, the higher price of the

These sizes will be supplied with the smaller MT Shank unless

only.

will be supplied Unless otherwise specified.

IMPORTANT NOTES :

IS : 6352 - 1971 1) TYPE 'A' & 'D' - FLATE FACE HELICAL FLUTED

4. Left Hand Cutter at 25 % extra from Dia 14.0 mm & above

5. Standard Series Slot Milling Cutters if required can

DAGGER BRANDR

HSS SLOT DRILLS BS : 122 (PART 1) : 1953

DIA INCH

PARALLEL SHANKPRICE (Rs.)

EACH

1) Straight flute, Flat Faced, will be supplied unless otherwise specified.2) Spiral Fluted, Flate faced same rate. 3) Left hand Cutter 25 % extra.

TAPER SHANKPRICE (Rs.)

EACH

HSS TAPER SHANK T-SLOT CUTTERS - BS : 122 (PART 1) : 1953

NOMINAL SIZE OF

BOLT INCH

TAPPED ENDPRICE (Rs.)

EACH

DIA OFCUTTER

INCH

WIDTH OFCUTTER

INCH

MT SHANKNO.

HSS TAPER SHANK T - SLOT CUTTERS (STAGGERED TEETH) IS : 2668 : 1992

NOMINAL OF T-SLOT MM

DIA OF CUTTERMM

These sizes will be supplied with the smaller MT Shank unless

For M35 = 40% & M42 = 80% extra

otherwise specified.


WIDTHMM

PRICE (Rs.)EACH

48

7/16 849 1332

7/8 1943 2758

3/8 831 1304

1.7/8 8329 -

1/8 776 1066

7/32 828 1169

9/16 1203 1865

5/8 1354 1936

5/16 831 1304

1/2 941 1487

3/16 776 1066

11/16 1531 2104

3/4 1667 2220

13/16 1943 2758

1 2306 3284

1.1/8 3282 4800

5/32 776 1066

1/4 831 1229

1.1/4 4002 5755

1.3/8 4813 7457

1.1/2 5574 8696

1.5/8 6899 -

1.3/4 7501 -

2 9132 -

1.1/4 2.5/16 1.3/16 4 29781

1 1.61/64 29/32 4 19394

3/8 53/64 23/64 2 5160

1.1/2 2.3/4 1.7/16 5 47064

1/4 37/64 1/4 2 4186

1/2 1.5/64 15/32 2 6607 7/16 61/64 27/64 2 5469

3/4 1.33/64 11/16 3 13279 5/8 1.21/64 37/64 3 10695

7/8 1.45/64 51/64 3 15661

1.1/8 2.1/8 1.1/16 4 25035

5/16 45/64 5/16 2 4720

1.3/8 2.1/2 1.5/16 5 36759

18 32 14 13701 14 25 11 10943

42 72 35 51765 36 60 28 42656

12 21 9 5693 10 18 8 5210

22 40 18 18354 28 50 22 23671

DAGGER BRANDR

HSS FACE CUTTERS : (As per Table No 19 of BSS : 122 : 1938)

DIAMETEROF CUTTER

INCH

OVERALLLENGTH OF

CUTTER INCH

DIAMETEROF BORE

INCH

PRICE(Rs.)

EACH

HSS WOODRUFF KEYSLOT CUTTERS - IS 2669 - 1971 (Straight Teeth Type)

DIA MM

WIDTHMM

NOM SIZEOF KEY MM

PRICE (Rs)EACH

HSS CUTTER FOR WOODRUFF KEYSEATS - BS : 122 (PART 1) 1953

B. S. Cutter& KEY

No.

PRICE(Rs.)

EACH

B. S. Cutter& KEY

No.

PRICE(Rs.)

EACH

B. S. Cutter& KEY

No.

PRICE(Rs.)

EACH

49

16.5

19.5

22.5

28.5

32.5

45.5

10 10 x 11 3999

6 6 x 7.5 2167

5 5 x 6.5 1906

5 5 x 7.5 2167

5 5 x 9 2465

6 6 x 9 2465 8 8 x 9 2465

8 8 x 11 3999 6 6 x 11 3999

8 8 x 13 4728 10 10 x 13 4728

7 7 x 13 4728

10 10 x 16 8031


For M35 = 40% & M42 = 80% extra

607 2791 809 4175 1211 6013 606 2377 609 4175 1011 6013

608 3375 810 4940 1012 6793 807 2791 1009 4206 812 6793

808 3375 1010 4940 1212 6793 1008 3375 1210 4940 - -

5 2 1.1/2 25249

2.1/2 1.1/4 3/4 6269

4 1.3/4 1.1/8 15011

2 1.1/4 3/4 4963

3 1.11/16 1.1/8 8975

1.3/4 1.1/4 3/4 4304


For M35 = 40% & M42 = 80% extra



For M35 = 40% & M42 = 80% extra


DAGGER BRANDR

HSS KEYWAY MILLING CUTTERS FORM RELIEVED IS : 6355 (STRAIGHT TEETH TYPE)

DIA MM ( js 16)

BORE MM(H7)

WIDTH MM(d9)

PRICE (Rs)EACH

50


For M35 = 40% & M42 = 80% extra

50 16

63 22

80 27

100 32

125 32

160 40

200 40

5 2807 6 3035 8 3220 10 3363

10 6343

16 7997

10 9097

10 3791

10 14989

14 10935

14 6343

32 16916

20 20442

16 6740

14 4357

20 7568

10 5243

6 3295

8 5825

8 3446

20 8648

12 5870

8 8317

16 11663 18 12637

18 8462

22 9660

18 7119

6 4609 8 4912

14 7432

20 13383 22 14255 25 15606

6 5427

12 4116

16 4681 18 5031

12 6908

25 10319

12 9922

12 15780 14 16814 16 18003 18 19159

25 23631 28 24951 32 28236

14 24517 12 23207

16 26073

22 32104

18 27910

25 34609 28 37507 32 41748

40 50351

22 21767

20 29877

36 45986

DAGGER BRANDR

HSS SLOTTING CUTTERS - BS : 122 (PART 1) : 1953 (STRAIGHT TEETH)

WIDTH OFCUTTER

DIAMETER OF CUTTERPRICE (Rs.) EACH

HSS SHELL END MILLS - IS : 6257 - 1982

DIA MM( js 16)

BORE(H7)

WIDTH( js 16)

PRICE (Rs.)EACH

INCH 2.1/2" 3" 3.1/2" 4" 5" 6"

HSS SHELL END MILL - BS : 122 (PART 1) : 1953

DIA OFCUTTER

INCH

LENGTH OFCUTTER

INCH

DIA OFBOREINCH

PRICE (Rs.)EACH

51

1/4 2281 2608 3253 3922 6269 8099 5/16 2473 2807 3571 4380 6865 8976 3/8 2640 3020 3860 4781 7469 9843 7/16 2791 3300 4151 5568 8099 10723

7/8 3781 4695 5942 8195 11897 16308

5/8 3300 3904 5067 7013 9922 13379

1 4005 5180 6372 8439 12891 17829

1/2 2949 3467 4450 5610 8725 11617

3/4 3533 4254 5506 7119 10900 14837


For M35 = 40% & M42 = 80% extra


40 16 32 4993

80 27 45 11807 100 32 50 18026 125 40 56 30224

63 27 40 7992

160 50 63 57046

50 22 36 6072


For M35 = 40% & M42 = 80% extra


4.1/2 2.1/4 1.1/2 23161 4 2.1/4 1.1/2 19318 3.1/2 1.7/8 1.1/4 13136

1.1/4 1 1/2 3435

2.3/4 1.5/8 1 9049

2 1.3/8 3/4 5675

2.1/2 1.5/8 1 7960

3 1.3/4 1.1/4 10535

1.3/4 1.1/4 3/4 4992

5 2.1/4 1.1/2 30224

2.1/4 1.1/2 1 6843

1.1/2 1.1/8 1/2 4201

6 2.1/4 2 40777 5.1/2 2.1/4 2 35356


For M35 = 40% & M42 = 80% extra


DAGGER BRANDR

HSS HAND AND SHORT MACHINE TAPS (COARSE PITCH) -NON SERIAL IS 6175: 1992 :PART I ,PART II & PART III AND HSS

NUT TAPS - IS : 6175 - 1991 (PART V) (6H TOLERANCE)

NOM DIAX

PITCH

PART I

STRFLUTES

STRFLUTES

SPIRALPOINT*

SPIRALFLUTES

PART II PART III

STRFLUTES

SPIRALPOINT*

SPIRALFLUTES

NUTTAPS

PRICE Rs. / EACH

52

M52x5.0 17559

M33x3.5 5118 11161

M68x6.0 34563

M36x4.0 7119 14439

M64x6.0 27698

M48x5.00 13987 29211

M45x4.5 13119 24738

M60x5.5 26336

M39x4.0 8356 17393

M30x3.5 4206 10111

M25x3.0 3024 6309

M27x3.0 3757 8108

M56x5.5 24989

M42x4.5 9750 20514

M5x0.8 329 407 443 354 443 497

M8x1.25 389 472 514 409 521 591 789

M2.0x0.40 505

M2.2x0.45 505

M2.3x0.40 505

M2.5x0.45 505

M3.5x0.6 306 386 417 334 421 492

M3x0.5 306 386 417 334 421 492

M4x0.7 306 386 417 334 421 492

M4.5x0.75 330 407 443 354 443 497

M6x1.0 329 407 443 363 457 501 699

M10x1.5 477 587 638 481 642 702 1047

M14x2.00 1057 1306 1538 2247

M16x2.00 1057 1306 1538 2247

M18x2.5 1629 1961 2229 3436

M20x2.5 2076 2485 2992 4588

M12x1.75 745 899 1008 1616

M22x2.5 2224 2649 3110 4693

M24x3.0 2443 2950 3375 5289

2. A Set Consist of Taper, Second & Bottoming.

1. Sizes upto M 10 will be supplied as per Part II unless otherwise specified.

IMPORTANT NOTES : (NUT TAPS - MOQ)

OVER M28 - M35 (15 NOS EACH) OVER M35 (10 NOS EACH)

4. Left Hand Taps at 25% Extra.

NOTES :

ITEM MARKED ARE EX-STOCK ITMS ALL REMAINNING ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF RS. 35,000/- NETT OR MOQ OF 3 NOS. PER SIZE. WHICHEVER IS HIGHER.

3. Serial Taps can be supplied at the same price.

5. For M35 = 40% & M42 = 80% extra

UPTO M10 (50 NOS EACH) OVER M10 - M28 (25 NOS EACH)

DAGGER BRANDR

HSS HAND AND SHORT MACHINE TAPS (FINE PITCH) - NON SERIAL IS 6175 : 1992 : (6H TOL) PART II & PART III (6H-TOL) AND

HSS NUT TAPS - IS : 6175 - 1991 (PART V)

NOM DIAX

PITCHSTR

FLUTESSPIRALPOINT*

SPIRALFLUTES

PART II PART III

STRFLUTES

SPIRALPOINT*

SPIRALFLUTES

NUTTAPS

PRICE Rs. / EACH

53

M18x2.0 1852 2076 2488 3969

M24x2.0 2796 3137 3865 6423

M30x2.0 4719 11331

M24x1.5 2796 3137 3865 6423

M10x1.25 534 644 739 598 645 816 1198

M20x1.5 2311 2600 3179 5088

M22x1.5 2504 2848 3484 5400

M27x2.0 4194

M12x1.0 1881

M4.5x0.5 443 550

M8x0.75 909

M18x1.0 3969

M26x1.5 3123

M25x2.0 2995

M27x1.5 4194 9100

M32x2.0 5001

M12x1.25 869 987 1166 1881

M12x1.5 869 987 1166 1881

M8x1.0 469 560 615 519 568 682 909

M28x1.5 4194 11331

M7x0.75 519 608 684 519 618 1003

M16x1.0 2806

M18x1.5 1852 2076 2488 3969

M9x1.0 909

M20x2.0 2311 2600 3179 5088

M22x2.0 2504 2848 3484 5400

M14x1.5 1073 1328 1553 2806

M16x1.5 1073 1328 1559 2806

M10x1.0 534 644 739 598 645 816 1198

M26x2.0 3123

M14x1.0 2806

M25x1.5 2995 7223

M6x0.75 448 608 575 495 541 640 790

M5x0.5 443 536

M14x1.25 1110 1328 1601 2806

M28x2.0 4194

M30x1.5 4719 11331

M32x1.5 5001

M33x1.5 5760

M30x3.0 4719

M33x2.0 5760 12566

M33x3.0 5760

M3.0x0.35 452 608

M3.5x0.35 452 608

M4x0.5 452 550

DAGGER BRANDR

HSS HAND & SHORT MACHINE TAPS (FINE PITCH) NON SERIAL IS : 6175 : 1992 : PART III (6H-TOL)

3. A Set Consist of Taper & Bottoming.

specified.

NOTES :

2. Serial Taps can be supplied at the same price.


5. For M35 = 40% & M42 = 80% extra

1. Sizes upto M 10 will be supplied as per Part II unless otherwise

NOTE: (NUT TAPS - MOQ)UPTO M10 - (50 NOS EACH)

OVER M28 - M35 (15 NOS EACH) OVER M35 (10 NOS EACH)

4. Left Hand Taps at 25% Extra.

OVER M10 - M28 (25 NOS EACH)

NOM DIA X PITCH

PRICE Rs. / EACH

STRAIGHT FLUTES

54

M36x1.5 7988 M35x1.5 7988

M36x2.0 7988 M36x3.0 7988 M39x1.5 9948 M39x2.0 9948 M39x3.0 9948 M42x1.5 11020 M42x2.0 11020 M42x3.0 11020 M42x4.0 11020

M45x3.0 15335 M45x4.0 15335

M45x1.5 15335 M45x2.0 15335

M48x1.5 15927 M48x2.0 15927 M48x3.0 15927 M48x4.0 15927

M56x1.5 27202

M68x2.0 38920

M50x3.0 17629

M60x2.0 28771

M64x2.0 30758

M76x6.0 56923

M85x6.0 84796 M90x6.0 105951

M52x2.0 19835

M64x1.5 30758

M56x2.0 27202

M68x4.0 39233

M64x3.0 31177

M72x6.0 46636

M95x6.0 133354

M56x4.0 27202

M50x1.5 17629

M68x1.5 38920

M100x6.0 164754

M52x1.5 19835

M52x4.0 19835

M50x2.0 17629

M52x3.0 19835

M80x6.0 68893

M60x1.5 28771

M60x3.0 29294

M56x3.0 27202

M60x4.0 29294

M64x4.0 31177

M68x3.0 39233

DAGGER BRANDR

HSS LONG SHANK MACHINE TAPS (COARSE PITCH) IS 6175 : 1991 : PART IV (6H - TOL)

NOM DIA XPITCH

PRICE Rs. / EACH

STR FLUTESTYPE 'A', 'C', 'D'

SPIRAL POINTTYPE 'B'

SPIRAL FLUTESTYPE 'C'

Type 'A' - 5 Deg Taper angle with Longer taper lead

Type 'D' - 10 Deg Taper angle without Spiral point

MACHINE TAPS IMPORTANT NOTES :

Type 'B' - 10 Deg Taper angle with Spiral point


For M35 = 40% & M42 = 80% extra

Type 'C' - 20 Deg Taper angle with Shorter taper lead

HSS LONG SHANK MACH. TAPS TO DIN - 2183 BSW / UNC / BSF / UN / NF (TYPE A, B & C)

SIZEINCH

PRICE (Rs.) EACHTYPE 'A' & 'C'

PRICE (Rs.) EACHTYPE 'B'

55

M30x3.5 5299

M27x3.0 4671

M68x6.0 46856

M52x5.0 19617

M22x2.5 2904 3375 3291

M36x4.0 8423

M48x5.0 16960

M16x2.0 1430 1663 1915

M33x3.5 6250

M20x2.5 2614 3004 3268

M56x5.5 26010

M45x4.5 15135

M42x4.5 11535

M64x6.0 33619

M18x2.5 2104 2433 2743

M60x5.5 29801

M39x4.0 9853

M24x3.0 3207 3746 4085

M12x1.75 993 1154 1265

M3x0.5 670 774 785

M4x0.7 670 774 785

M5x0.8 484 568 591

M6x1.0 518 609 641

M8x1.25 560 670 692

M10x1.5 711 816 868

M14x2.0 1430 1663 1915

1/4 527 628 3/16 521 593

5/16 613 711

1/8 474 554

3/8 737 927 7/16 876 1037 1/2 1040 1197 5/8 1524 1760 3/4 1902 2600 7/8 3048 3407 1 3820 4029 1.1/8 5090 5449 1.1/4 6138 6629 1.1/2 9565 9998 1.3/8 9565 9998 1.5/8 11427 11876 1.3/4 13273 13749 1.7/8 16215 16650 2 19168 19587

DAGGER BRANDR

HSS LONG SHANK MACHINE TAPS (COARSE PITCH) IS 6175 : 1991 : PART IV (6H - TOL)

NOM DIA XPITCH

PRICE Rs. / EACH

STR FLUTESTYPE 'A', 'C', 'D'

SPIRAL POINTTYPE 'B'

SPIRAL FLUTESTYPE 'C'

Type 'C' - 20 Deg Taper angle with Shorter taper lead

Type 'A' - 5 Deg Taper angle with Longer taper lead

For M35 = 40% & M42 = 80% extra


IMPORTANT NOTES :MACHINE TAPS

Type 'B' - 10 Deg Taper angle with Spiral point

Type 'D' - 10 Deg Taper angle without Spiral point

HSS LONG SHANK MACH. TAPS TO DIN - 2183 BSW / UNC / BSF / UN / NF (TYPE A, B & C)

SIZEINCH

PRICE (Rs.) EACHTYPE 'A' & 'C'

PRICE (Rs.) EACHTYPE 'B'

55

M3x0.5 670 774 785

M5x0.8 484 568 591

M6x1.0 518 609 641

M8x1.25 560 670 692

M12x1.75 993 1154 1265

M10x1.5 711 816 868

M4x0.7 670 774 785

M64x6.0 33619

M16x2.0 1430 1663 1915

M30x3.5 5299

M33x3.5 6250

M36x4.0 8423

M56x5.5 26010

M52x5.0 19617

M20x2.5 2614 3004 3268

M27x3.0 4671

M68x6.0 46856

M22x2.5 2904 3375 3291

M60x5.5 29801

M18x2.5 2104 2433 2743

M14x2.0 1430 1663 1915

M48x5.0 16960

M45x4.5 15135

M24x3.0 3207 3746 4085

M39x4.0 9853

M42x4.5 11535

3/4 1902 2600

1.1/8 5090 5449

5/16 613 711

1.3/4 13273 13749

2 19168 19587

1.5/8 11427 11876

1/8 474 554 3/16 521 593 1/4 527 628

7/16 876 1037 1/2 1040 1197

3/8 737 927

5/8 1524 1760

1 3820 4029 7/8 3048 3407

1.1/4 6138 6629 1.1/2 9565 9998 1.3/8 9565 9998

1.7/8 16215 16650

DAGGER BRANDR

HSS LONG SHANK MACHINE TAPS (FINE PITCH) IS 6175 : 1991 : PART IV : (6H -TOL)

NOM DIA X PITCH

PRICE Rs. / EACH

STRAIGHT FLUTESTYPE 'A', 'C', 'D'

SPIRAL POINT TYPE 'B'

56

M10x1.0 745 862

M6x0.75 589 691

M3.5x0.35 909 976

M4.5x0.5 589 691

M5x0.5 589 691

M27x1.5 5501 6288

M28x2.0 5980 6819

M30x2.0 6191

M16x1.5 1382 1700

M22x1.5 3139 3710

M12x1.25 1078 1246

M20x1.5 3027 3574

M20x2.0 3027 3574

M3x0.35 909 976

M24x2.0 3508 4138

M25x2.0 4465 5276

M7x0.75 674 779

M4x0.5 909 976

M8x1.0 619 738

M14x1.25 1411 1669

M26x2.0 4564 5388

M14x1.5 1411 1669

M18x2.0 2314 2809

M22x2.0 3139 3710

M12x1.5 1078 1246

M24x1.5 3508 4138

M25x1.5 4465 5276

M18x1.5 2314 2809

M10x1.25 758 876

M26x1.5 4564 5388

M27x2.0 5501 6288

M28x1.5 5980 6819

M30x1.5 6191

M30x3.0 6191

M32x1.5 6799

M32x2.0 6799

M33x1.5 7487

M33x2.0 7487

M33x3.0 7487

M35x1.5 10465

M42x1.5 14168

M39x3.0 12868

M39x2.0 12868

M36x3.0 10465

M40x2.0 13758

M36x1.5 10465

M36x2.0 10465

M40x1.5 13758

M40x3.0 13758

M39x1.5 12868

DAGGER BRANDR

HSS LONG SHANK MACHINE TAPS (FINE PITCH) IS 6175 : 1991 : PART IV : (6H -TOL)

NOM DIA X PITCH

PRICE Rs. / EACH

STRAIGHT FLUTESTYPE 'A', 'C', 'D'

HSS PIPE TAPS NPS NPT NPSF - BS : 949 - 1969

BSP BS : 949 - 1957 BSPT BS : 949 PART III - 1982

PARALLEL THREAD

PRICE Rs. / EACHTAPSIZE

INCH BSP NPS NPSF

TAPER THREAD

BSPT NPT NPTF

57

M42x2.0 14168

M42x3.0 14168

M42x4.0 14168

M45x1.5 19752

M45x3.0 19752

M45x2.0 19752

M48x4.0 20820

M48x2.0 20820

M52x2.0 25738

M52x1.5 25738

M50x3.0 24064

M48x3.0 20820

M52x3.0 25738

M52x4.0 25738

M48x1.5 20820

M50x1.5 24064

M45x4.0 19752

M50x2.0 24064


3/4 2624 2752 3385 3433 3482 4025

1 4124 4594 5619 5336 5477 6261

2.1/2 34621 50532 51324

1/16 661 661

1/8 510 579 702 652 673 802

1/2 1709 1837 2223 2218 2328 2637

5/8 1935

1/4 795 1003 1238 1167 1224 1511

3/8 1173 1234 1528 1543 1616 1830

7/8 3273

1.1/4 6193 7240 7822 7919 9224

1.1/2 7728 8946 9593 10227

1.3/4 11822

2 13874 15986 16854 17711

2.1/4 23995

3 44857 66116 66653

3.1/2 58379 87149 87298

4 73383 109854 111885

2.3/4 38638

ITEM MARKED ARE EX-STOCK ITEMS ALL REMAINING ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF RS. 35,000/- NETT OR MOQ OF 5 NOS. PER SIZE WHICHEVER IS HIGHER.

we can also supply BSP (P) Taps to newBS 949:Part - III- 1982 (G Series) at the same rate as per order.

For M35 = 40% & M42 = 80% extra

A set consists of 2 Taps (Taper & Plug)

IMPORTANT NOTES :BSP(P), BSP(T), NPS NPT NPTS NPTF

DAGGER BRANDR

58

HSS HAND TAPS BA - BS : 949 : 1969 AND HSS NUT TAPS BA - BA : 949 :1969

SIZEBA STRAIGHT

FLUTES

PRICE (Rs) EACH

HSS GROUND THREAD TAPS : STANDARD HAND & SHORT MACHINE TAPS :

B.S.B.(BRITISH STANDARD BRASS) WHITWORTH FORM 0B.S.CY.(BRITISH STANDARD CYCLE) 60 THREAD FORM

B.S. 949 - 1969

B. S. CYSIZE INCH

TPI

STR. FLUTES SPIRAL POINTED


SPIRALPOINT

NUTTAPS

ITEM MARKED ARE EX-STOCK ITEMS ALL REMAINING ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF RS. 35,000/- NETT OR MOQ OF 75 NOS. PER SIZE WHICHEVER IS HIGHER.

PRICE (Rs) EACH

5/16 26 484 552

7/16 26 739 888

9/16 26 1464 1618

3/8 26 589 673

1/2 26 915 1067

1 24 2905 -

1.370 24 6141 -

1/4 26 388 448

3/16 32 359 440

B. S. BSIZE INCH

TPI


PRICE (Rs) EACH

2 320 428 667

5 320 428 737

6 354 460 817

4 320 428 667

0 376 471 768

1 376 471 768

3 320 428 667

5/16 26 498 570

3/4 26 1880 -

1 26 2895 -

3/8 26 570 653

7/16 26 756 899

1/2 26 931 1084

9/16 26 1453 1599

5/8 26 1453 -

1/4 26 377 442

For M35 = 40% & M42 = 80% extra

For M35 = 40% & M42 = 80% extra

DAGGER BRANDR

HSS GROUND THREAD TAPS : STANDARD HAND & SHORT MACHINE TAPS :

B.S. CON (BRITISH STANDARD CONDUIT) WHITWORTH FORM B.S. : 949 --1969 (ZONE - 3)

B. S. CONSIZE INCH

TPI PRICE (Rs) EACH


PRICES FOR LPG CYLINDER 3/4 NGT TAPS :EACH(Rs.)

PRICES FOR LPG CYLINDER BSGT TAPS :EACH(Rs.)

1/2 18 977 977 - - - - 5/8 18 1494 - 3/4 16 1977 - 1 16 3084 - 1.1/4 16 4477 - - - - 1.1/2 14 7160 - 2 14 12519 -

Rs. 35,000/- NET OR 10 NOS. PER SIZE WHICHEVER IS HIGHER.ALL ABOVE ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF

For M35 = 40% & M42 = 80% extra

4893

4247

3397

44431. 3/4" - 14 NGT tap interrupted 5 flutes to our Drg.No. M22 - 531



4. 3/4" - 14 NGT tap NON-interrupted 4 flutes to our Drg.No. M22 - 535

0.715" x 14 TPI - BSGT Tap Interrupted 5 flutes to our Drg. No. SKT-012 4990

0.715" x 14 TPI -BSGT Tap NON-Interrupted 4 flutes to our Drg. No. SKT- 012 4352

ALL NGT & BSGT TAPS ARE SUBJECT TO ORDER VALUE BEING MINIMUM OF Rs. 35,000/ - NETT. OR 15 NOS. PER SIZE WHICHEVER IS HIGHER.

IMPORTANT NOTE :

Prices for all TiN and TiAlN Taps will be given on specific request.

59

DAGGER BRANDR

HSS HAND TAPS BSW ,BSF,UNC,UNF AND HSS NUT TAPS BS : 949 : 1969

SIZEINCH STRAIGHT

FLUTES

PRICE (Rs) EACH

SPIRALPOINT

NUTTAPS

SPIRALFLUTES

HSS NIB TAPS (CORSE PITCH) TO OUR STANDARD

NOM DIAX PITCH

STRIGHT FLUTESPRICE (Rs.) EACH

7/16 586 722 840 1603

3/4 1616 1935 2289 3397

1 2820 3257 3739 6052

1/8 321 383

5/16 376 466 515 981

2.1/2 27432

1.1/4 4590 10101

1/2 741 889 1025 2226

3/16 321 393 691

9/16 1073 1308 1577 2226

1/4 333 400 465 783

3/8 458 560 639 1293

11/16 2890

5/8 1073 1308 1577 2890

7/8 2229 2686 3126 4653

1.1/8 3818 8149

1.3/8 5926 12021

1.1/2 7115 14405

1.5/8 (BSF ONLY) 8384 16212

1.3/4 9860 20263

2 13985 28877

2.1/4 20848

2.3/4 34222

3 45950

For M35 = 40% & M42 = 80% extra

IMPORTANT NOTES :A Set Consist of Taper, Second & Bottoming.

ITEM MARKED ARE EX-STOCK ITEMS ALL REMAINING ITEMS WILL ATTRACT MINIMUM ORDER VALUE OF RS. 35,000/- NETT OR MOQ OF 75 NOS. PER SIZE. WHICHEVER IS HIGHER.


For M35 = 40% & M42 = 80% extra


M4x0.7 452

3/8" BSW 710

7/16" BSW 997

M5x0.8 484

M18x2.5 2266

M16x2.0 1444

M20x2.5 3029

1/4" BSW 504

M6x1.0 541

M12x1.75 832

M8x1.25 564

1/8" BSW 483

5/32" BSW 494

9/16" BSW 1444

5/8" BSW 1444

3/16" BSW 494

M14x2.0 1444

5/16" BSW 564

M10x1.5 710

1/2" BSW 997

60

DAGGER BRANDR

Price (Rs.) Each

Bri

gh

t / S

tea

m T

em

pe

red

NOM DIA X PITCH

IS 6175 - PART II & DIN 371

Fluteless Fluteless Oil Grooves

SPPT Spiral Cast Iron

M3x0.5

M4x0.7

M5x0.8

M6x1.0

M8x1.0

M8x1.25

M10x1.25

M10x1.5

M12X1.75

M14X2.0

M16X1.5

M16X2.0

617 705 510 1067 1117

761 876 634 1306 1364

527 591 439 924 1019

551 624 463 924 1019

551 624 463 924 1019

733 894 609 1282 1339

883 1013 738 1306 1364

527 591 439

IS 6175 - PART IV

NOM DIA X PITCH IS 6175 - PART IV

M6X1.0

M8X1.0

M8X1.25

M10X1.25

M10X1.5

M12X1.75

M14X2.0

M16X1.5

M16X2.0

1805 1489

1020 851

1243 1040

960 800

Tin

Co

ati

ng

IS 6175 - PART IV

Fluteless Fluteless Oil

GroovesSPPT Spiral Cast Iron

M6X1.0

M8X1.0

M8X1.25

M10X1.25

M10X1.5

M12X1.75

M14X2.0

M16X1.5

M16X2.0

NOM DIA X PITCH

Bri

gh

t /

Ste

am

Te

mp

ere

d

IS 6175 - PART II & DIN 371NOM DIA X PITCH

836 960 694 1374 1465

578 650 479

604 685 506 996 1090

604 685 506 996 1090

791 963 658 1364 1423

675 772 560 1151 1199

969 1110 807 1406 1465

578 650 479 996 1090

M3x0.5

M4x0.7

M5x0.8

M6x1.0

M8x1.0

M8x1.25

M10x1.25

M10x1.5

M12X1.75

M14X2.0

M16X1.5

M16X2.0

Tin

Co

ati

ng

IS 6175 - PART II & DIN 371NOM DIA X PITCH

M3x0.5

M4x0.7

M5x0.8

M6x1.0

M8x1.0

M8x1.25

M10x1.25

M10x1.5

M12X1.75

M14X2.0

M16X1.5

M16X2.0

Tic

n / T

i (A

I) N

NOM DIA X PITCH

M6X1.0

M8X1.0

M8X1.25

M10X1.25

M10X1.5

M12X1.75

M14X2.0

M16X1.5

M16X2.0

1109 925

1352 1131

1962 1619

1043 869

Tic

n / T

i (A

I) N

* MINIMUM ORDER VALUE OF RS. 35,000/- NETT OR MOQ 3 NOS. PER SIZE. WHICHEVER IS HIGHER.

HSS - E PANTHER SERIES TAPS TO IS 6175 - PART - II PART - IV AND DIN-371

DAGGER BRANDR

628 708 521

628 708 521 1071 1164

850 1029 707 1448 1506

657 745 549 1071 1164

906 1043 755 1506 1565

1054 1208 878 1507 1565

734 840 608 1234 1283

657 745 549 1071 1164

1650 1360

876 730

932 778

1136 948

61

Bri

gh

t / S

tea

m T

em

pe

red

NOM DIA X PITCH Fluteless Fluteless Oil


M3x0.5

M4x0.7

M5x0.8

M6x1.0

M8x1.0

M8x1.25

M10x1.25

M10x1.5

M12X1.75

M14X2.0

M16X1.5

M16X2.0

NOM DIA X PITCH

M6X1.0

M8X1.0

M8X1.25

M10X1.25

M10X1.5

M12X1.75

M14X2.0

M16X1.5

M16X2.0

Tin

Co

ati

ng

Fluteless Fluteless Oil


M6X1.0

M8X1.0

M8X1.25

M10X1.25

M10X1.5

M12X1.75

M14X2.0

M16X1.5

M16X2.0

NOM DIA X PITCH

Bri

gh

t / S

team

Tem

per

ed

NOM DIA X PITCH

M6X1.0

M8X1.0

M8X1.25

M10X1.25

M10X1.5

M12X1.75

M14X2.0

M16X1.5

M16X2.0

Tic

n / T

i (A

I) N

* MINIMUM ORDER VALUE OF RS. 35,000/- NETT OR MOQ 3 NOS. PER SIZE. WHICHEVER IS HIGHER.

Price (Rs.) Each

1194 1376 1011 2248

1625 1856 1351 3109

1632 1872 1360 3329

1625 1856 1351 3329

1249 1528 1020 1938

997 1340 858 1584

1650 2213 1360 2879

2264 3032 1865 3953

2264 3032 1865 3953

2377 3122 1954

1086 1441 931 1698 1769

1359 1654 1109 2074 2164

1805 2393 1489 3126

2395 3164 1998 4096

2562 3194 2115 4694

2395 3164 1998 4096

1466 1782 1200 2210 2299

1174 1542 1005 1812 1882

1962 2572 1619 3374

2527 3297 2130 4238

2773 3282 2292 4937

2527 3297 2130 4238

IS 6175 - PART III

NOM DIA X PITCH

M3x0.5

M4x0.7

M5x0.8

M6x1.0

M8x1.0

M8x1.25

M10x1.25

M10x1.5

M12X1.75

M14X2.0

M16X1.5

M16X2.0

Tin

Co

ati

ng

1788 2263 1489 3533

1308 1508 1108 2362

1781 2035 1482 3313

1781 2035 1482 3533

IS 6175 - PART III

DIN 374 / DIN-376

DIN 374 / DIN-376

DIN 374 / DIN-376

DAGGER BRANDR

HSS - E PANTHER SERIES TAPS TO IS 6175PART - III, DIN-374 AND DIN-376

NOM DIA X PITCH

M3x0.5

M4x0.7

M5x0.8

M6x1.0

M8x1.0

M8x1.25

M10x1.25

M10x1.5

M12X1.75

M14X2.0

M16X1.5

M16X2.0

Tic

n / T

i (A

I) N

1423 1638 1203 2543

1936 2214 1610 3517

1943 2441 1619 3737

1936 2214 1610 3737

IS 6175 - PART III

62

MASONRY DRILLS - CARBIDE TIPPED

(GROUND FLUTED & BRIGHT PLATED) TO OUR STANDARD

SIZE

MM INCH

FLUTELENGTH

PRICE (Rs) EACH

ITEMS MARKED ARE EX-STOCK.

OVER ALLLENGTH

DeluxeStandard

HSS HATHYAR TOOL BITS (BLANKS)

SQUARE HSS TOOL BITS (BLANKS) PRICE (Rs.) EACH

SIZEIN

INCH

CORRESPONDINGSIZE MM

HATHYAR

20

HATHYAR

50

3 1/8 H 40 76 54 61

11 7/16 115 160 245 270

9 11/32 80 120 196 216

12 15/32 115 160 217 240 13 1/2 115 160 217 240

8 5/16 80 120 148 164

6.5 1/4 60 107 87 96

5 3/16 45 87 73 80 4 5/32 45 85 65 73

5.5 7/32 45 87 87 96 6 15/64 60 107 96 106

7 9/32 60 107 169 184

10 3/8 80 120 174 192

1/4 x 4 6 x 100 150 520 525

5/16 x 4 8 x 100 183 687

3/8 x 3 179 591 628

3/8 x 6 338 1261 1335

3/8 x 10 595 2384

1/4 x 6 6 x 150 217 845 853

5/16 x 3 8 x 75 143 503

5/8 x 4 16 x 100 536 2027

3/16 x 3 5 x 75 113 291 3/16 x 4 5 x 100 148 426 3/16 x 6 5 x 150 230 904 1/4 x 3 6 x 75 129 390

1/4 x 8 6 x 200 311 1443

5/16 x 6 8 x 150 308 1108 1118 5/16 x 8 8 x 200 391 1575

3/8 x 4 217 783 845

3/8 x 8 462 1803 1910

10 x 75 199 652 10 x 100 237 876 10 x 150 367 1372 10 x 200 511 1929 10 x 250 648 2547 1/2 x 3 12 x 75 269 968

1/2 x 6 12 x 150 518 1991 2075 1/2 x 8 12 x 200 682 2779 2893

1/2 x 4 12 x 100 338 1263 1342

1/2 x 10 12 x 250 1036 3829

5/8 x 6 16 x 150 792 3127 3301 5/8 x 8 16 x 200 1073 4390

20 x 100 811 3209

20 x 200 1618 6404 20 x 150 1183 4808

3/4 x 6 1087 4309 4584

1 x 8 25 x 200 2489 9614 1 x 6 25 x 150 1831 7229

3/4 x 4 743 2930

3/4 x 8 1485 5908

orders.

and including 1/2" square.

Prices of HSS M35 (5% Cobalt) and HSS M42 (8% Cobalt)will be given on only request. 1. Items marked are Ex-Stock, other sizes against specific

2. Quantity to be ordered in multiple of 10 only for sizes upto

HATHYAR

51

63

DAGGER BRANDR

64

DAGGER BRANDR

6565

DAGGER BRANDR

Vicker’s Hardness Number / Diamond Pyramid.

Brinell Hardnes Number (w-ball) 10 mm/3000 Kgs

Rockwell A Scale - Diamond Cone/60 Kgs

Rockwell B Scale - 1/16”dia. Ball/100 kgs

Rockwell C Scale - Diamond Cone/150 Kgs

VHNBHN HRA HRBHRC

HARDNESS CONVERSION CHARTHARDNESS CONVERSION CHART

values bayond range only for information*

940920900880860840820800780760740720700690680670660650640630620610600590580570560550540530520510500490480470460450440430420410400390380370360350340330320310300295290285280275270265260255250245240230220210200190180170160150140130120110100

VHN BHN HRA HRB HRC

*767*757*745*733*722*710*698*684*670*656*647*638*63062061160159158257356455454553552551750749748847947146045244243342541540539738837936936035034133132231330320428428027527026526125625224724323823322821920920019018117116215214313312411410595

85.685.385

84.784.484.183.883.483

82.682.281.681.381.180.880.680.380

79.879.579.278.978.678.478

77.877.477

76.776.476.175.775.374.974.574.173.673.372.872.371.871.470.870.369.869.268.768.167.867

66.465.865.264.864.564.263.863.563.162.762.462

61.661.260.7

6867.567

66.465.965.364.764

63.362.561.861

60.159.759.258.858.357.857.356.856.355.755.254.754.153.653

52.351.751.150.549.849.148.447.746.946.145.344.543.642.741.840.839.838.837.736.635.534.433.332.231

29.829.228.527.827.126.425.624.824

23.122.221.320.3*18

*15.7*13.4*11*8.5*6*30

*110

*109

*108

*107

*105.5

*104.5

*103.5

*102

*101.

99.5

98.196.795

93.491.589.587.185

81.778.775

71.266.762.356.2

66

DAGGER BRANDR

67

DAGGER BRANDR

DAGGER BRANDR

68

SP

EE

D &

FE

ED

S F

OR

H.S

.S.

DR

ILL

S

HA

ND

0.0

5

0.1

2

0.2

0.2

5

0.3

0.4

0.4

0.5

HA

ND

0.0

4

0.1

0.1

5

0.2

0.2

5

0.3

0.3

0.4

12000

6000

2400

1500

1000

750

480

300

190

HA

ND

0.0

5

0.1

2

0.2

0.2

5

0.3

0.4

0.4

0.5

10000

5000

2100

1300

850

640

410

260

165

HA

ND

0.0

7

0.1

2

0.2

0.3

0.4

0.5

0.6

0.6

HA

ND

H

AN

D

0.0

5

0.1

0.1

2

0.1

5

0.2

0.2

0.3

HA

ND

0.0

8

0.0

2

0.2

5

0.3

0.4

0.5

0.6

0.7

28000

14000

5700

3600

2400

1800

1100

700

450

HA

ND

0.0

5

0.1

5

0.2

5

0.3

0.4

0.5

0.6

0.7

HA

ND

0.0

5

0.1

4

0.2

0.2

5

0.3

0.4

0.4

5

0.5

3180

1600

635

400

265

200

130

80

50

16000

8000

3200

2000

1325

1000

650

400

250

1300

650

255

160

110

80

50

32

20

32000

16000

6350

4000

2650

2000

1280

800

500

HA

ND

0.0

6

0.1

6

0.2

5

0.3

5

0.4

0.5

0.6

5

0.7

3650

1840

735

455

305

230

145

90

60

8000

4000

1600

1000

660

500

320

200

127

HA

ND

H

AN

D

0.0

5

0.0

8

0.1

0.1

0.1

5

0.2

0.2

2800

1400

570

360

240

180

110

70

45

HA

ND

0.0

4

0.1

4

0.1

8

0.2

2

0.2

5

0.3

0.4

5

0.5

17500

8700

3500

2200

1500

1100

700

440

280

HA

ND

H

AN

D

0.1

0.2

0.3

0.4

0.5

0.6

0.6

8000

4000

1600

995

680

500

318

200

125

HA

ND

H

AN

D

0.0

6

0.1

0.1

5

0.2

0.3

0.3

0.3

38000

19000

7600

4800

3200

2400

1520

1000

600

Wor

k-P

ices

Mat

eria

lC

utt

ing

Sp

eed

in m

/min

Dri

ll D

iam

ete

r m

m

12

58

1216

2540

63

Bass

- D

uct

ile

Chip

eed

Chip

ped

Alu

min

um

Long

Copper

& Z

ine a

lloy

Alu

min

um

Short

Bra

ss -

Brittle

*45 K

g m

m2

Ste

el

*45-7

0 K

g m

m2

Ste

el

*above

100 K

g m

m2

Ca

st Iro

n

*above

18 K

g m

m2

Allo

ySte

el

*above

70 K

g m

m2

Ca

st Iro

n

*above

18-3

0 K

g m

m2

Mang S

teel

Ste

el

*ab

ove

15%

Sta

inle

ss S

teel

80-1

00

6-1

2

50-6

0

80-1

20

20-3

0

5-1

5

120-1

60

50-7

0

3-5

30-3

5

15-2

5

8-1

5

ff nn nnn n f n n f f fn f n f nf fn ff n f

ITM

Qu

ick G

uid

elin

es f

or

dri

llin

g d

iffe

ren

t m

ate

ria

ls

Mate

rial

Chara

cter

Poin

t angle

Helix

/ F

lute

Modifi

catio

nC

oola

nt

Speed

Feed

Rem

ark

s / R

eco

mm

endatio

ns

Carb

on &

Allo

y S

teels

Norm

alis

ed

Forg

ed

Cast

118°

125°

118°

Sta

ndard

None

Solu

ble

Oil

M/m

in18 to 2

415 to 2

115 to 2

1

mm

/rev.

0.1

to 0

.5F

eed r

ange for

5 m

m to 2

5 m

m d

ia.

Cast

Iro

nG

rey

/ S

G. Ir

on

Malle

able

Mart

ensi

tic

90°

/ 11

8°

90°

/ 11

8°

Sta

ndard

Web thin

ned

Com

pre

ssed A

ir24 to 3

015 to 2

10.1

to 0

.5D

ouble

poin

t angle

.

Only

carb

ide d

rills

work

s on this

.

Manganese

Ste

els

Tough

Slo

w130°

Web t

hin

ned

Dry

3 to 3

.50.0

4 to 0

.1A

pply

feed b

efo

re c

onta

ct N

o u

se o

f punch

/ n

o in

terr

uptio

n.

Sta

inle

ss S

teel

Aust

eniti

cM

art

ensi

tic135°

118°

Quic

k S

tandard

Split

Web t

hin

Sulf

/ C

l Sol.O

ilS

olu

ble

Oil

6 to 1

212 to 1

8015 to 0

.60.1

to 0

.5B

lued r

igid

/ d

onot use

punch

.F

eedra

nge for

5 m

m to 2

5 m

m d

ia.

Monel m

eta

lW

ork

Har

endi

ng11

0°

to 1

15°

Sta

ndard

Split

So

lub

le O

il6

to

15

01

5 t

o 0

.6U

se T

hic

k w

eb

/ S

ho

rt /

Rig

id D

rill

Hig

h N

icke

l / N

imonic

Wor

k H

aren

ding

110°

to 1

15°

Sta

ndard

Split

So

lub

le O

il3

to

60

15

to

0.6

Use

Th

ick

we

b /

Sh

ort

/ R

igid

Drill

(rota

ry d

rill)

Copper

(sta

tionary

drill)

Soft

Hard

100°

130°

as

above

Qui

ck /

Wid

eQ

uick

/ W

ide

Sta

ndar

d

None

So

lub

le O

il3

0 t

o 4

62

1 t

o 3

03

0 t

o 4

60

.1 t

o 0

.5P

oin

t a

ng

le a

s p

er

chip

be

ha

vio

ur.

Bro

nze

/ B

rass

Cast

& n

eva

l ye

llow

bra

ssH

ard

typ

e

118°

118°

130°

Slo

w /

Wid

eS

tand

ard

Sta

ndar

d

Gro

und li

pN

one

So

lub

le O

il3

0 t

o 6

03

0 t

o 6

02

1 t

o 3

00

1.

to 0

.5S

ho

rt c

hip

s /

Lip

grd

. F

or

larg

e s

ize

.C

on

tinu

ou

s lo

ng

ch

ips

typ

e

Magnesi

um

& A

lloys

Fre

ecu

ttin

g11

8°

Sta

ndard

None

So

lub

le O

il6

0 t

o 9

00

1.

to 0

.5D

ia c

ast

allo

ys.

Alu

min

ium

Long c

hip

Short

chip

130°

100°

Quic

kS

tandard

None

Pa

raffi

nL

ard

Oil

/ K

ero

sen

e3

0 t

o 6

00

1.

to 0

.5P

ure

alu

min

ium

Allo

ys a

nd

hig

h s

ilico

n g

rad

es,

M3

5.

Tita

niu

mP

oor

cond

uctiv

ity11

8°

to 1

40°

Web t

hin

ned

Cop

iou

s S

ol.

Oil

4.5

to

90

.05

to

0.3

Th

ick

we

b /

ob

tuse

an

gle

to

larg

er.

Pla

stic

sT

herm

opla

stic

sT

herm

ose

ttin

g130°

to 1

40°

60°

to 9

0°

Quic

kS

low

None

None

So

ap

So

ln.

Dry

6 t

o 4

52

7 t

o 4

50

.2 t

o 0

.50

.1 t

o 0

.5S

pe

ed

/ F

ee

d b

y m

ate

ria

l (P

VC

/CA

)P

ow

de

ry a

bra

sive

ma

tl. (

Ba

cke

lite

)

Gra

nite

/ C

oncr

ete

Meso

nary

Std

.S

tandard

None

Dry

21

to

30

0.2

to

0.5

Use

Ma

son

ary

Drills

/ C

arb

ide

Tip

.

** O

nly

po

pu

lar

ma

teria

l ad

dre

sse

d in

th

is c

ha

rt,

oth

ers

ma

y b

e r

ela

ted

acc

ord

ing

to

ch

ara

cte

rist

ics.

69

DAGGER BRANDR

TROUBLE SHOOTINGTROUBLE SHOOTING(DRILLS)(DRILLS)

PROBLEM CAUSES REMEDIES

1 Oversize hole1. Unequal lip angles2. Unequal lip lengths

Regrind drill point to correct angle with proper relief

2 Irregular & poor finish1. Loose hold.2. Chocking of chips3. Excessive feed rate

Check the holder and run-outIncrease the force & volume of coolant.Decrease the feed rate.

3 Bucking of the drill Axial deflection of drill Use correct guide bushes.

4 Chattering of drill1. Hard/tough workpiece2. Tortional deflection

Use a shorter drill with thick webto improper sturdiness

5 Breaking of the drill

1. Poor rigidity of fixture.2. Improper speed and feed.3. Insufficient chip removal4. Excessive web-thickness

Use rigid fixture and chucks.Select speed and feed as per job.Remove the chips frequentlyWeb thining & proper point grinding.

6 Breakage in deep hole

1. Blockage of chips2. Non-uniform back-taper3. Runout on OD

Try wood-pecking system.Check back taper uniformityCheck concentricity

7 Rubbing1. Improper Point relief2. Non-uniform back taper

Regrind drill-point with proper relief.Check for negative back-taper on body.

8 Burning Land washes off

1. Insufficient coolant flow.2. Inappropriate coolant3. Hard work-piece

Ensure proper coolant flowUse proper coolant recommended.Select the right drill suitable for job.

9 Splitting of drills 1. Axial play in spindle2. Springy clamping of job3. Excessive feed

Correct the spindle play.Ensure rigid clamping.Reduce the feed.

10 Tang breakage1. Slipping chuck2. Defect in inner surface of morse taper

Modify the inner surface of the holderor change the holder.

TROUBLE SHOOTINGTROUBLE SHOOTING(TAPS)(TAPS)

PROBLEM CAUSES REMEDIES

Tap breakage1

Poor tap lifechipping / wear2

3

4

5

6

Larger Thread(Oversize cutting)

Smaller thread(undersize cutting)

Bell mouth Hole

Unsatisfactory finish(Poor finish)

1. Surface hardening of hole2. Chip congestion3. Thread surface 4. Ineffective coolant supply5. High cutting speed6. Smaller hole size7. Cold welding/irregular job micro

1. Incorrect tap2. Incorrect chamfer symmetry3. Small hole 4. Hits at bottom of hole5. Tool hardness, geometry6. Blunt tap

1. Incorrect type of tap2. Smaller hole size3. Improper alignment4. Spindle restriction5. Built up edges6. High speed

1. Incorrect tap selection2. Inaccurate setup3. Rigid spindle4. Tolerance

1. Incorrect starting pressure

1. Blunt tap2. Badly reground3. Coolant improper quality / qty.

- Choose suitable type tap- Ensure proper centre align- Select proper hole size- Use slipping cluth / shorten- Check the hardness of job- Regrind the tap

- Work hardening material, Lower speed- Check speed. Use alternate type- Ensure proper geometry- Improper the efficiency of coolant- Lower the existing speed- Refer the chart for correct hole size- Improper lubrication & speed

- Use specified tap for application- Use the recommended hole size- Check the alignment & eccentricity- Check the spindle condition / run out- Improper lubrication- Lower the speed

- Check the correctness of tap used- Recheck the alignment - Ensure spindle movement smooth- Ensure geometrical tolerances

- Use a sprindle with axial float

- Resharpen the tap.- Grind properly.- Use ample supply of right lubricant

70

DAGGER BRANDR

71

DAGGER BRANDR

DAGGER BRANDR

Birla Precision Technologies Ltd.

M A N U F A C T U R E R S(DIVISION)

We at ITM are committed to manufactureQuality Cutting Tools by continual

improvements in process, by adapting ourskills, knowledge, innovation & creativityand by implementation of quality systemsthrough involvement of all the employees.

We shall strive to achieve Customers’satisfaction through continual improvements

in

twist drills reamers milling cutters ground thread … · 2018-12-21 · panther series products...

Documents