unbeatably versatileGarant Mastersteel Pickpocket – a breakthrough at the extreme limits of performance in all milling disciplines.

INNOVATIONPrices plus vat, valid until 31/ 07/ 2017

Comparison test: ɾ Material: 1.2379 (X155CrvMo 12 1)

ɾ Machine: Huron

ɾ Orientation: vertical

ɾ Cooling lubricant: air

ɾ Machine interface: HsK63

ɾ arbor: Weldon

ɾ tool ⌀ 12 mm

slottingramping

VIDEO

Garant Mastersteel Pickpocket in action: www.ho7.eu/pocket

The new GARANT MasterSteel Pickpocket is unique: it combines power and application versatility! the joker in the pack for all problems scores highly in the disciplines of milling, ramping and even drilling, with outstanding performance data.

Versatility has a new name: GARANT Mastersteel PickPocket.the new universal milling Cutter from garant offers up to 80 % better performanCe at a longer tool life. the new dimension in mono maChining.

Crescent-shaped cutting edge ɾ end face, under the centre.

ɾ unequal spacing

ɾ Optimised for HPC milling.

Recessed drill tip ɾ extremely large recess

ɾ For aggressive ramping and plunging.

Innovative geometry ɾ Optimum chip breaking when ramping.

Unequal helical pitch ɾ For smooth running.

2

GARANT MasterSteel PickPocket www.hoffmann-group.com

GARANT MasterSteel PickPocket

Competitor

Diameter 12 mm 12 mmNo. of teeth Z 3 4Cutting speed vc 220 m/minFeed rate per tooth fz 0.075 mm 0.029 mmFeed rate speed vf 1320 mm/min 680 mm/minPlunge angle 24°

GARANT MasterSteel PickPocket

Competitor

Diameter 12 mm 12 mmNo. of teeth Z 3 4Cutting speed vc 220 m/minFeed rate per tooth fz 0.075 mm 0.056 mmFeed rate speed vf 1320 mm/min 1320 mm/minPlunge angle 0°

side milling heliCal milling drilling

Special core diameter increase

ɾ ensures optimum stability during the machining process

Green ring ɾ For general applications.

ɾ Main application field: steel.

3

INNOVATIONNet Prices, valid until 31/ 07/ 2017

GARANT MasterSteel PickPocket

Competitor

Diameter 12 mm 12 mmNo. of teeth Z 3 4Cutting speed vc 220 m/minFeed rate per tooth fz 0.170 mm 0.084 mmFeed rate speed vf 3000 mm/min 1980 mm/minPlunge angle 0°

GARANT MasterSteel PickPocket

Competitor

Diameter 12 mm –No. of teeth– 3 –Cutting speed vc 220 m/minFeed rate per tooth fz 0.05 mm –Feed rate speed vf 880 mm/min –Plunge angle 90° –

GARANT MasterSteel PickPocket

Competitor

Diameter 12 mm 12 mmNo. of teeth Z 3 4Cutting speed vc 220 m/minFeed rate per tooth fz 0.075 mm 0.029 mmFeed rate speed vf 1320 mm/min 680 mm/minPlunge angle 18°

Power for your production.from 5.7 to 20 mm diameter and with long ground reCess.

4

GARANT MasterSteel PickPocket www.hoffmann-group.com

Suitable for/ vc [m/min]

ISO code N N N P P P P P H H H H H M M S K20 2404 260 240 190 180 150 80 70 250 ● ● ○ ● ●

⌀ f8 DC 11

X 20 2404

Ls

L4

⌀ D4

Ltot

R

fz

fz

MasterSteel PickPocket solid carbide roughing end mill

HPCmm TiAlN mm mm mm mm mm mm mm mm5,7 38.10 13 19 5.5 57 6 0.29 0.04 0.05

6 38.10 13 19 5.8 57 6 0.3 0.04 0.05

6,7 49.50 16 25 6.5 63 8 0.34 0.04 0.05

7 49.50 16 25 6.8 63 8 0.35 0.04 0.05

7,7 49.50 19 25 7.5 63 8 0.39 0.05 0.06

8 49.50 19 25 7.8 63 8 0.4 0.05 0.06

8,7 69.60 22 30 8.5 72 10 0.44 0.06 0.08

9 69.60 22 30 8.8 72 10 0.45 0.06 0.08

9,7 69.60 22 30 9.5 72 10 0.49 0.06 0.08

10 69.60 22 30 9.8 72 10 0.5 0.06 0.08

11,7 88.40 26 36 11.5 83 12 0.59 0.07 0.09

12 88.40 26 36 11.8 83 12 0.6 0.07 0.09

13,7 116.50 26 36 13.5 83 14 0.69 0.08 0.1

14 116.50 26 36 13.8 83 14 0.7 0.08 0.1

15,5 163.50 31 42 15.3 92 16 0.78 0.08 0.1

16 163.50 31 42 15.8 92 16 0.8 0.08 0.1

17,5 196.– 31 42 17.3 92 18 0.88 0.1 0.13

18 196.– 31 42 17.8 92 18 0.9 0.1 0.13

19,5 248.– 41 52 19.3 104 20 0.98 0.1 0.13

20 248.– 41 52 19.8 104 20 1 0.1 0.13

Solid carbide

DIN

6527 Type

N f8

3

38° ≠ ae 0,4×D DIN

6535 HB

h6

HPC

 MasterSteel PickPocket solid carbide roughing end mill HPC

For roughing and finishing. With corner radii similar to torus cutters. Up to 1×D into solid material at very high feed rates with smooth cutting action.

Advantage: Optimised flute form, eccentric relief ground, wide chip space.

R

20 2404

Ground recess

5

INNOVATIONNet Prices, valid until 31/ 07/ 2017

Suitable for/ vc [m/min]

ISO code N N N P P P P P H H H H H M M S K20 2406 260 240 190 180 150 80 70 250 ● ● ○ ● ●

⌀ f8 DC 11

X 20 2406

Ls

L4

⌀ D4

Ltot

R

fz

fz

MasterSteel PickPocket solid carbide roughing end mill

HPCmm TiAlN mm mm mm mm mm mm mm mm5,7 43.20 13 24 5.5 62 6 0.29 0.04 0.05

6 43.20 13 24 5.8 62 6 0.3 0.04 0.056,7 59.60 16 30 6.4 68 8 0.34 0.04 0.05

7 59.60 16 30 6.7 68 8 0.35 0.04 0.057,7 59.60 21 30 7.4 68 8 0.39 0.05 0.06

8 59.60 21 30 7.7 68 8 0.4 0.05 0.068,7 82.80 22 38 8.4 80 10 0.44 0.06 0.08

9 82.80 22 38 8.7 80 10 0.45 0.06 0.089,7 82.80 22 38 9.4 80 10 0.49 0.06 0.0810 82.80 22 38 9.7 80 10 0.5 0.06 0.08

11,7 108.– 26 46 11.3 93 12 0.59 0.07 0.0912 108.– 26 46 11.6 93 12 0.6 0.07 0.09

13,7 138.50 26 52 13.3 99 14 0.69 0.08 0.114 138.50 26 52 13.6 99 14 0.7 0.08 0.1

15,5 198.– 36 58 15 108 16 0.78 0.08 0.116 198.– 36 58 15.5 108 16 0.8 0.08 0.1

17,5 229.– 36 67 17 117 18 0.88 0.1 0.1318 229.– 36 67 17.5 117 18 0.9 0.1 0.13

19,5 348.– 41 74 19 126 20 0.98 0.1 0.1320 348.– 41 74 19.5 126 20 1 0.1 0.13

Solid carbide

Standard Type

N f8

3

38° ≠ ae 0,4×D DIN

6535 HB

h6

HPC

 MasterSteel PickPocket solid carbide roughing end mill HPC

For roughing and finishing. With corner radii similar to torus cutters. Up to 1×D into solid material at very high feed rates with smooth cutting action.

Advantage: Optimised flute form, eccentric relief ground, wide chip space.

R

20 2406

With long ground recess

Cutting data recommendation for GARANT Mastersteel PickPocket.extended data for ramping and orbital milling.

6

GARANT MasterSteel PickPocket www.hoffmann-group.com

Material group Material designation Strength

(N/mm²)

Vc [m/min] Ramping

Rwmax

Helical milling (climb milling) Drilling ⌀

5.1 – 6.0⌀

6.1 – 8.0⌀

8.1 – 12.0⌀

12.1 – 16.0⌀

16.1 – 20.0 CoolingPmax G EWmax

min. Start max. min max G=1.5 G=1.8 Fz factor fz fz fz fz fz

1.0 General structural steels P < 500 240 260 280 45° 0.75 D 1.5 1.8 25° 16° 0.9 0.038 0.047 0.065 0.085 0.100 Emulsion

1.1 General structural steels P 500 – 850 220 240 260 45° 0.75 D 1.5 1.8 25° 16° 0.9 0.038 0.047 0.065 0.085 0.100 Emulsion

2.0 Free cutting steels P < 850 220 240 260 45° 0.75 D 1.5 1.8 25° 16° 0.9 0.038 0.047 0.065 0.085 0.100 Emulsion

2.1 Free cutting steels P 850 – 1000 170 190 210 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.035 0.044 0.060 0.080 0.095 Emulsion3.0 Unalloyed heat treatable steels P < 700 220 240 260 45° 0.75 D 1.5 1.8 25° 16° 0.9 0.038 0.047 0.065 0.085 0.100 Emulsion

3.1 Unalloyed heat treatable steels P 700 – 850 170 190 210 45° 0.75 D 1.5 1.8 25° 16° 0.9 0.035 0.044 0.060 0.080 0.095 Emulsion

3.2 Unalloyed heat treatable steels P 850 – 1000 160 180 200 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.035 0.044 0.060 0.080 0.095 Emulsion

4.0 Alloyed heat treatable steels P 850 – 1000 160 180 200 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.038 0.047 0.065 0.085 0.100 Emulsion

4.1 Alloyed heat treatable steels P 1000 – 1200 120 140 160 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.032 0.040 0.055 0.070 0.085 Emulsion5.0 Unalloyed case-hardening steels P < 750 220 240 260 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.038 0.047 0.065 0.085 0.100 Emulsion

6.0 Alloyed case-hardening steels P < 1000 170 190 210 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.038 0.047 0.065 0.085 0.100 Emulsion

6.1 Alloyed case-hardening steels P >1000 120 140 160 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.032 0.040 0.055 0.070 0.085 Emulsion7.0 Nitriding steels P < 1000 160 180 200 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.038 0.047 0.064 0.085 0.100 Emulsion

7.1 Nitriding steels P >1000 120 140 160 45° 0.75 D 1.5 1.8 25° 16° 0.7 0.032 0.040 0.055 0.070 0.085 Emulsion

8.0 Tool steels P < 850 170 190 210 30° 0.5 D 1.5 1.8 18° 11° 0.8 0.035 0.045 0.060 0.080 0.095 Emulsion

8.1 Tool steels P 850 – 1100 160 180 200 30° 0.5 D 1.5 1.8 18° 11° 0.8 0.033 0.040 0.055 0.073 0.090 Emulsion

8.2 Tool steels P 1100 – 14009.0 High-speed steels P 830 – 1200 160 180 200 30° 0.5 D 1.5 1.8 18° 11° 0.8 0.033 0.040 0.055 0.073 0.090 Emulsion

10.0 Hardened steels H 48 – 55 HRC

10.1 Hardened steels H 55 – 60 HRC

10.2 Hardened steels H 60 – 67 HRC11.0 Wear-resistant structural steel P 1350

11.1 Wear-resistant structural steel P 1800

12.0 Spring steels P < 150013.0 Stainless steels, sulphuretted M < 700 80 90 100 15° 0.5 D 1.5 1.8 18° 11° 0.022 0.028 0.038 0.050 0.060 Emulsion

13.1 Stainless steels, austenitic M < 700 70 80 90 15° 0.5 D 1.5 1.8 18° 11° 0.022 0.028 0.038 0.050 0.060 Emulsion

13.2 Stainless steels, austenitic M < 850 60 70 80 15° 0.5 D 1.5 1.8 18° 11° 0.024 0.030 0.040 0.054 0.065 Emulsion

13.3 Stainless steels, martensitic M < 1100 40 50 60 15° 0.5 D 1.5 1.8 18° 11° 0.020 0.024 0.032 0.042 0.050 Emulsion

14.0 Special alloys S < 120015.0 Cast iron (GG) K < 180 HB 230 250 260 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.065 0.080 0.120 0.140 0.170 Emulsion

15.1 Cast iron (GG) K > 180 HB 210 220 250 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.055 0.067 0.100 0.120 0.145 Emulsion

15.2 Cast iron (GGG, GT) K > 180 HB 180 200 220 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.045 0.055 0.075 0.100 0.120 Emulsion

15.3 Cast iron (GGG, GT) K > 260 HB 160 180 200 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.026 0.320 0.043 0.560 0.070 Emulsion

16.0 Titanium, titanium alloys S < 850

16.1 Titanium, titanium alloys S 850 – 120017.0 Long-chipping Al; wrought Al; Mg N < 530

17.1 Short-chipping Al alloy N < 600

17.2 Cast Al alloys > 10 % Si N < 600

18.0 Low-alloy copper N < 400

18.1 Short-chipping brass N < 600

18.2 Long−chipping brass N < 600

18.3 Short−chipping bronze N < 600

18.4 Short−chipping bronze N 650 – 850

18.5 Long-chipping bronze N < 850

18.6 Long-chipping bronze N 850 – 1200

7

INNOVATIONNet Prices, valid until 31/ 07/ 2017

Material group Material designation Strength

(N/mm²)

Vc [m/min] Ramping

Rwmax

Helical milling (climb milling) Drilling ⌀

5.1 – 6.0⌀

6.1 – 8.0⌀

8.1 – 12.0⌀

12.1 – 16.0⌀

16.1 – 20.0 CoolingPmax G EWmax

min. Start max. min max G=1.5 G=1.8 Fz factor fz fz fz fz fz

1.0 General structural steels P < 500 240 260 280 45° 0.75 D 1.5 1.8 25° 16° 0.9 0.038 0.047 0.065 0.085 0.100 Emulsion

1.1 General structural steels P 500 – 850 220 240 260 45° 0.75 D 1.5 1.8 25° 16° 0.9 0.038 0.047 0.065 0.085 0.100 Emulsion

2.0 Free cutting steels P < 850 220 240 260 45° 0.75 D 1.5 1.8 25° 16° 0.9 0.038 0.047 0.065 0.085 0.100 Emulsion

2.1 Free cutting steels P 850 – 1000 170 190 210 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.035 0.044 0.060 0.080 0.095 Emulsion3.0 Unalloyed heat treatable steels P < 700 220 240 260 45° 0.75 D 1.5 1.8 25° 16° 0.9 0.038 0.047 0.065 0.085 0.100 Emulsion

3.1 Unalloyed heat treatable steels P 700 – 850 170 190 210 45° 0.75 D 1.5 1.8 25° 16° 0.9 0.035 0.044 0.060 0.080 0.095 Emulsion

3.2 Unalloyed heat treatable steels P 850 – 1000 160 180 200 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.035 0.044 0.060 0.080 0.095 Emulsion

4.0 Alloyed heat treatable steels P 850 – 1000 160 180 200 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.038 0.047 0.065 0.085 0.100 Emulsion

4.1 Alloyed heat treatable steels P 1000 – 1200 120 140 160 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.032 0.040 0.055 0.070 0.085 Emulsion5.0 Unalloyed case-hardening steels P < 750 220 240 260 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.038 0.047 0.065 0.085 0.100 Emulsion

6.0 Alloyed case-hardening steels P < 1000 170 190 210 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.038 0.047 0.065 0.085 0.100 Emulsion

6.1 Alloyed case-hardening steels P >1000 120 140 160 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.032 0.040 0.055 0.070 0.085 Emulsion7.0 Nitriding steels P < 1000 160 180 200 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.038 0.047 0.064 0.085 0.100 Emulsion

7.1 Nitriding steels P >1000 120 140 160 45° 0.75 D 1.5 1.8 25° 16° 0.7 0.032 0.040 0.055 0.070 0.085 Emulsion

8.0 Tool steels P < 850 170 190 210 30° 0.5 D 1.5 1.8 18° 11° 0.8 0.035 0.045 0.060 0.080 0.095 Emulsion

8.1 Tool steels P 850 – 1100 160 180 200 30° 0.5 D 1.5 1.8 18° 11° 0.8 0.033 0.040 0.055 0.073 0.090 Emulsion

8.2 Tool steels P 1100 – 14009.0 High-speed steels P 830 – 1200 160 180 200 30° 0.5 D 1.5 1.8 18° 11° 0.8 0.033 0.040 0.055 0.073 0.090 Emulsion

10.0 Hardened steels H 48 – 55 HRC

10.1 Hardened steels H 55 – 60 HRC

10.2 Hardened steels H 60 – 67 HRC11.0 Wear-resistant structural steel P 1350

11.1 Wear-resistant structural steel P 1800

12.0 Spring steels P < 150013.0 Stainless steels, sulphuretted M < 700 80 90 100 15° 0.5 D 1.5 1.8 18° 11° 0.022 0.028 0.038 0.050 0.060 Emulsion

13.1 Stainless steels, austenitic M < 700 70 80 90 15° 0.5 D 1.5 1.8 18° 11° 0.022 0.028 0.038 0.050 0.060 Emulsion

13.2 Stainless steels, austenitic M < 850 60 70 80 15° 0.5 D 1.5 1.8 18° 11° 0.024 0.030 0.040 0.054 0.065 Emulsion

13.3 Stainless steels, martensitic M < 1100 40 50 60 15° 0.5 D 1.5 1.8 18° 11° 0.020 0.024 0.032 0.042 0.050 Emulsion

14.0 Special alloys S < 120015.0 Cast iron (GG) K < 180 HB 230 250 260 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.065 0.080 0.120 0.140 0.170 Emulsion

15.1 Cast iron (GG) K > 180 HB 210 220 250 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.055 0.067 0.100 0.120 0.145 Emulsion

15.2 Cast iron (GGG, GT) K > 180 HB 180 200 220 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.045 0.055 0.075 0.100 0.120 Emulsion

15.3 Cast iron (GGG, GT) K > 260 HB 160 180 200 45° 0.75 D 1.5 1.8 25° 16° 0.8 0.026 0.320 0.043 0.560 0.070 Emulsion

16.0 Titanium, titanium alloys S < 850

16.1 Titanium, titanium alloys S 850 – 120017.0 Long-chipping Al; wrought Al; Mg N < 530

17.1 Short-chipping Al alloy N < 600

17.2 Cast Al alloys > 10 % Si N < 600

18.0 Low-alloy copper N < 400

18.1 Short-chipping brass N < 600

18.2 Long−chipping brass N < 600

18.3 Short−chipping bronze N < 600

18.4 Short−chipping bronze N 650 – 850

18.5 Long-chipping bronze N < 850

18.6 Long-chipping bronze N 850 – 1200

Milling cutter ⌀Smallest hole ⌀ (G 1.5)

Largest hole ⌀ (G 1.8)

5.7 8.55 10.26

6 9.00 10.80

6.7 10.05 12.06

7 10.50 12.607.7 11.55 13.86

8 12.00 14.40

8.7 13.05 15.66

9 13.50 16.20

9.7 14.55 17.4610 15.00 18.00

11.7 17.55 21.06

12 18.00 21.6013.7 20.55 24.66

14 21.00 25.20

15.5 23.25 27.90

16 24.00 28.80

17.5 26.25 31.5018 27.00 32.40

19.5 29.25 35.10

20 30.00 36.00

RWmax =maximum ramp angle

Pmax =maximum helix pitch

G =Ratio pocket circle ⌀ to tool ⌀

EWmax =Helix pitch angle (path of milling cutter centre point)

Nothing is as good as the original!

THE ADVANTAGES TO yOu

ɾ Full high performance and precision thanks to original regrinding and coating

ɾ Comprehensive grinding services from a single source ɾ Simple, quick processing completed on schedule ɾ Efficient and cost-saving ɾ Transparent, fair prices, no hidden surcharges

→ Simply contact your Hoffmann Group technical advisor

GARANT ToolGrindingOriginal regrind for the best tool performance and longest tool life

this advertising brochure, its graphics and the item numbering system are protected by copyright. reprinting and reproduction of any kind – even as extracts – is only permitted with written permission from Hoffmann GmbH Qualitätswerkzeuge, 81241 Munich, Germany. all prices plus vat, valid until 31/ 07/ 2017; Prices in €, not guaranteed, errors and omissions excepted.

PROfESSIONAl All-ROuND REcONDITIONING SERVIcE fOR yOuR cuTTING TOOlS.

0509

7-en

KW

1623

EN

Hoffmann GmbH QualitätswerkzeugeHaberlandstraße 55 · D-81241 MünchenTel.: +49 89 8391-0 · Fax: +49 89 8391-80

Hoffmann Nürnberg GmbH QualitätswerkzeugeFranz-Hoffmann-Straße 3 · D-90431 NürnbergTel.: +49 911 6581-0 · Fax: +49 911 6581-317

Hoffmann Göppingen QualitätswerkzeugeGmbH & Co. KGUlmer Straße 70 · D-73037 GöppingenTel.: +49 7161 622-0 · Fax: +49 7161 622-10270

Hoffmann GmbHHerbert-Ludwig-Straße 4 · D-28832 AchimTel.: +49 4202 527-0 · Fax: +49 4202 527-15

Hoffmann Austria Qualitätswerkzeuge GmbHMondseer Straße 2 · A-4893 Zell am MoosTel.: +43 508877-0 · Fax: +43 508877-189

Hoffmann Essen Qualitätswerkzeuge GmbHFrohnhauser Straße 69 · D-45127 EssenTel.: +49 201 7222-0 · Fax: +49 201 7222-159