Assembly instructions and setting Postal AVR1. We make mounting elements according to the scheme:

2. After assembly, connect the programmer to the computer, if it is defined as a newdevice and asks to install the driver, then the installation to DD1 CP2102 everything is OK.3. Disable programmer.4. convenient for you create a folder PostalAVR, and put it in the program itselfPostal3.exeGo to the folder and run the VCP CP210xVCPInstaller.exe (install driver VCP).Follow the onscreen instructions. Wait until the installation is completed.We perform a similar operation with the driver USBXpress (runUSBXpressInstaller.exe folder USBXpress).Now, if the drivers are installed correctly, after you connect the programmer to portUSB, it should be recognized by the system and will appear in the Device Manager virtual COM-Port:

5. Run the program Postal3.exeIn the program go in the settings (Settings - COM Settings) and the bottom (in PostalAVR device setup) prescribes the number appears COM-port (in this case 8):

6. Hit the button Test, in the left window should appear:If you see this message, then everything is OK and the programmer is ready for operation.7. The speed of read-write memory chips can be significantly improved by working withdriver USBXpress.To do this, first copy the file to a folder SiUSBXp.dll with the program Postal3:

Connect the programmer to USB-port.Run the file from the folder CP210xSetIDs.exe Set_ID_CP2102. In the window that appears setcheck the Pid and change EA60 to EA61 on (the operation switch for CP2102work with the driver USBXpress). Also, put a tick and prescribe the device name(POSTAL AVR PROGRAMMER or POSTAL3 ...) in a row Product String.After that, click the Program Device:

If the recording was normal, then after disconnecting the programmer (when runningprogram CP210xSetIDs.exe!) data in all fields disappear, and when you connectprogramming reappear, but with modifications.

Next, change the settings Postal3 COM on USBXpress, click Test, and look in the dialogwindow. If all goes well, we'll see Device Mode 0 Answer OK:

. : http://www.radiodevices.ru/ E-mail www@radiodevices.ru: 1 .www.radiodevices.ru

Postal AVR1. :

2. , , DD1 CP2102 .3. .4. PostalAVR, Postal3.exe VCP CP210xVCPInstaller.exe ( VCP). . . USBXpress (USBXpressInstaller.exe USBXpress)., , USB, COM-:

5. Postal3.exe (Settings - OM Settings) ( PostalAVR device setup) COM- ( 8):

6. Test, :

, .7. - , USBXpress. SiUSBXp.dll Postal3:

USB-. CP210xSetIDs.exe Set_ID_CP2102. Pid 60 61 ( 2102 USBXpress). (POSTAL AVR PROGRAMMER POSTAL3...) Product String. Program Device:

, ( CP210xSetIDs.exe!) , , . Postal3 COM USBXpress, Test . , Device Mode 0 Answer OK:

. : http://www.radiodevices.ru/ E-mail www@radiodevices.ru: 1 .www.radiodevices.ru