us39953-1 fsa series uhf:layout 1 - rfi-motorola | rfi...

2
The FSA Series arrays are based on the popular OA Series dipole array antennas. Supplied in “kit” form the these antennas are delivered in flat- pack packaging to minimise freight and warehousing issues and allow for simplified assembly at time of installation. The FSA Series arrays have approximately 130 degrees horizontal beamwidth and offer 5, 7 and 9dBd in gain. The use of the flat screen reflector boosts the front to back ratio considerably allowing for tailoring antenna patterns for frequency re-use in extended networks. FSA Series Arrays feature the same solid construction as the standard array series. The folded dipoles utilise an internal phasing harness in PTFE based double screened coaxial cable with a polyethylene jacket. The screens themselves are also made of fully welded aluminum to assist in minimising PIM. With all welded construction and superior internal harness construction the antennas provide not only excellent radiation characteristics but also defined, high levels of intermodulation and noise suppression. IM performance is -140dBc based on a two carrier test. The entire array rests at ground potential and offers the ultimate in lightning resistant antennas. Offset (cardioid) pattern with 130 Degree nominal Horizontal Beamwidth High front to back ratio to allow frequency re-use by tailoring coverage areas Hermetically sealed internal PTFE based phasing harness capable of 500W continuous operation. Shipped unassembled for ease of handling, easily assembled on site Direct DC grounded for lightning protection and reduction of precipitation static noise Industry leading dual sectioned antenna PIM ratings (-140dBc) providing low IM and low noise characteristics for optimum performance The screen can be purchased to retrofit to an existing OA series array. See table below; digital ready pim rating FSA20-67-DIN Kitted components available for individual sale Complete Array Part Number FSA10-67-DIN FSA20-67-DIN FSA40-67-DIN Antenna Only Part Number SMD40-67-DIN OA20-67-DIN OA40-67-DIN Screen Only Part Number M-8570 M-8562 M-8563 Copyright RF Industries Pty Ltd 2011. Subject to change without notice. 1 P-40945-8 FSA Series UHF Antennas 406 - 512 MHz RFI 9329 Ravena Rd. Suite C Twinsburg OH 44087 USA Phone: 330 486 0706 Fax: 330 486 0705 rfiamericas.com

Upload: hadiep

Post on 23-Jun-2018

221 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: US39953-1 FSA Series UHF:Layout 1 - RFI-Motorola | RFI …rfi-motorola.com/.../2015/02/40945-8_FSA-Series-UHF.pdf · 2015-02-11 · Antenna Only Part Number SMD40-67-DIN OA20-67-DIN

The FSA Series arrays are based on the popular OA Series dipole arrayantennas. Supplied in “kit” form the these antennas are delivered in flat-pack packaging to minimise freight and warehousing issues and allow forsimplified assembly at time of installation.

The FSA Series arrays have approximately 130 degrees horizontalbeamwidth and offer 5, 7 and 9dBd in gain. The use of the flat screenreflector boosts the front to back ratio considerably allowing for tailoringantenna patterns for frequency re-use in extended networks.

FSA Series Arrays feature the same solid construction as the standardarray series. The folded dipoles utilise an internal phasing harness inPTFE based double screened coaxial cable with a polyethylene jacket.The screens themselves are also made of fully welded aluminum to assistin minimising PIM.

With all welded construction and superior internal harness construction theantennas provide not only excellent radiation characteristics but alsodefined, high levels of intermodulation and noise suppression. IMperformance is -140dBc based on a two carrier test. The entire array restsat ground potential and offers the ultimate in lightning resistant antennas.

• Offset (cardioid) pattern with 130 Degree nominal Horizontal Beamwidth

• High front to back ratio to allow frequency re-use by tailoring coverageareas

• Hermetically sealed internal PTFE based phasing harness capable of500W continuous operation.

• Shipped unassembled for ease of handling, easily assembled on site

• Direct DC grounded for lightning protection and reduction ofprecipitation static noise

• Industry leading dual sectioned antenna PIM ratings (-140dBc)providing low IM and low noise characteristics for optimumperformance

• The screen can be purchased to retrofit to an existing OA series array. See table below; digi

tal

ready

pimrat

ing

FSA20-67-DIN

Kitted components available for individual sale

Complete Array Part Number FSA10-67-DIN FSA20-67-DIN FSA40-67-DIN

Antenna Only Part Number SMD40-67-DIN OA20-67-DIN OA40-67-DIN

Screen Only Part Number M-8570 M-8562 M-8563

Copyright RF Industries Pty Ltd 2011. Subject to change without notice.1P-40945-8

FSA Series

UHF Antennas

406 - 512 MHz

RFI9329 Ravena Rd.Suite C Twinsburg OH 44087 USAPhone: 330 486 0706Fax: 330 486 0705

rfiamericas.com

Page 2: US39953-1 FSA Series UHF:Layout 1 - RFI-Motorola | RFI …rfi-motorola.com/.../2015/02/40945-8_FSA-Series-UHF.pdf · 2015-02-11 · Antenna Only Part Number SMD40-67-DIN OA20-67-DIN

Mechanical Specifications Model Number FSA10-67-DIN FSA20-67-DIN FSA40-67-DINConstruction Welded aluminum, corrosion protection platingScreen Length inches 20 39.5 79Screen Width inches 23.5 23.5 23.5Total Weight lbs 9 30 40Shipping Weight lbs 19 Screen = 31 + Array = 35 (Total=66) Screen = 36 + Array = 44 (Total=80)

Shipping Dimensions

inches

H 10 Screen = 10 Array = 15 Screen = 10 Array = 17

W 32 Screen = 32 Array = 7 Screen = 32 Array = 7

L 28 Screen = 47 Array = 87 Screen = 85 Array = 126

Termination 7/16 DIN female on a 20" cable tailMounting Clamps included to suit pole diameter 2.0” to 3.5”

Projected Area ft2No ice 1.4 4.7 5.5

With ice 2.4 7.5 9.6

Lateral Thrust @ 100mph lbsNo ice 34 117 136With ice 60 186 237

Wind Gust Rating mphNo ice >150 >150 >150

With ice >150 >150 >150

Rotational Torque @ 100mph ft-lbs

No ice 3 6 13With ice 6 10 23

Electrical SpecificationsModel Number FSA10-67-DIN FSA20-67-DIN FSA40-67-DINNominal Gain dBd 5 7 9

Frequency MHz 406-512

Tuned Bandwidth MHz Full

VSWR (Return Loss) <1.5 :1 (14)

Nominal Impedance Ω 50

Vertical Beamwidth 71° 35° 17°

Horizontal Beamwidth 130° 129° 132°

Front / Back Ratio dB 18 20 22

Input Power (Watts) 500

Passive IM 3rd order (2x20W) dBc <-140

digital

ready

pimrat

ing

360 380 400 420 440 460 480 500 520 540 560

2.0

1.9

1.8

1.7

1.6

1.5

1.4

1.3

1.2

1.1

1.0

Frequency (MHz)

VS

WR

Typical VSWR response (FSA20-67-DIN)

Typical E Plane (FSA10-67-DIN)

Typical H Plane (FSA20-67-DIN)

Typical E Plane (FSA20-67-DIN) Typical E Plane (FSA40-67-DIN)

Copyright RF Industries Pty Ltd 2011. Subject to change without notice.2P-40945-8

FSA Series

UHF Antennas

406-512 MHz

RFI9329 Ravena Rd.Suite C Twinsburg OH 44087 USAPhone: 330 486 0706Fax: 330 486 0705

rfiamericas.com