user manual temp-11042014 · •quick start guide •guarantee booklet 2.1 mains power your dab/fm...
TRANSCRIPT
USER MANUAL
MODEL: GOSTR, GOCANDY, GODASH
DAB+ Digital Radiowith Bluetooth and smartphone charging
GOHyper-link ALL text to
corresponding sections
Welcome1
Troubleshooting5
Technical Specifications6
Customer Support7
Your DAB+ Digital Radio2.1 In The Box2.2 Front View2.3 Rear View
2.4 Top View
2
Quick Setup3.1 Power On and Autoscan 3.2 Changing DAB+ Stations3.3 Scanning for DAB+ Stations3.4 Adjusting the Volume3.5 Switching Off
3
Features4MODE button4.1 DAB+ Mode4.2 FM Mode4.3 Bluetooth Mode
VOLUME Dial
4.4 AUX mode
4.5 Adjust Volume4.6 Select DAB+ Station4.7 Select FM frequency4.8 FM Station seeking
MENU button
4.9 Scan View DLS information(FM)4.10 Full Scan(DAB+)4.11 Manual Tune(DAB+)4.12 Prune Station(DAB+)
4.13 Equaliser4.14 Set Backlight4.15 Set Language4.16 Factory Reset4.17 Software Version
PRESET button
4.18 Storing DAB+/FM Presets4.19 Selecting a Preset Station
4.5 Charging Mode
WelcomeThank you for choosing this Goodmans product. We’ve been making electronics for the British people for 70 years. Each of our projects has been carefully designed to be great at what it does and this one is no exception. We hope you enjoy your new GO DAB+ Digital Radio.
1
Your DAB+ Digital Radio2In The Box
Carefully remove your GO DAB+ Digital Radio from the box.
• GODAB+ Digital Radio
• Mains power supply lead• Quick Start Guide• Guarantee Booklet
2.1
Mains Power
Your DAB/FM Radio requires a mains supply of 100-240V AV ~ 50/60Hz. Please ensure that your mains supply is compatible before use. Disconnect the Power Cord from the mains when not in use.
Position of DAB Digital Radio
Avoid the following locations:• Where it is exposed to direct sunlight • Where it is close to heat radiating sources • Where the humidity is high and ventilation is poor • Where it is dusty
Adjusting the AerialFully extend the aerial to ensure good reception in both DAB and FM Radio modes. It may be necessary to alter the position of the DAB Digital Radio and/or the aerial to achieve the best signal.
Place on a flat, stable surface that is not subject to vibrations.
Inside the box you will find:
GO DAB DIGITAL RADIO
Front View
Top View
2.2
Rear View2.3
2.4
LED Indicator
Red/Green – Charging/Fully Charged
Aerial
Micro USB SocketUsed to connect the radio to the mains power supply.
Aux-In SocketUsed to connect external audio sources.
USB SocketUsed to charge up mobile devices.
Reset Button
Power buttonPress to switch on/off.
Presets buttonsPress to store presets or recall preset station
A
B
C
D
E
F
G
H
Mode buttonPress to switch between DAB+, FM, Bluetooth and AUX mode.
MENU buttonPress to display DLS.Press and hold to display MENU options.
VOLUME DialPress and rotate to select DAB+/FMstation.Rotate to adjust volume.
I
J
K
GO DAB DIGITAL RADIO
A
B
G F I J K
CDEF
GO DAB DIGITAL RADIO
MODE button
Features4
DAB+ mode1. If the radio is not in DAB+ mode, press the MODE
button until DAB+ is shown on the display.
2. Press and hold MENU button, rotate the VOLUME dial to FULL SCAN and then press VOLUME dial to perform full scan.
4.1
4.2 FM Mode
4.3 Bluetooth Mode
1. If the radio is not in FM mode, press the MODE
button until FM is shown on the display.
The GO Digital Radio has Bluetooth capability. To pair
the GO Digital Radio with a Bluetooth device:
1. Press the MODE button repeatedly to select Bluetooth mode and ‘Bluetooth logo’ will be flashing on the display.
2. Activate your Bluetooth device
3. ‘GO’ will appear on your Bluetooth device.
4. The name of Bluetooth device will appear once it is connected.
Quick Setup3 Power on and Autoscan1. Connect the power cable to the DAB Radio and mains power supply to charge up the radio.
2. Raise and extend the aerial.
3. Press down the POWER button to turn on the radio, it will autoscan automatically for first time usage.
3.1
Changing DAB+ stations1. Make sure it is in DAB+ mode.
2. Press the VOLUME dial and then rotate to the station you want to listen to.
3. Press the VOLUME dial again to confirm.
3.2
Scanning for DAB+ stations1. Make sure it is in DAB+ mode.
2. Press and hold the MENU button.
3. Rotate the VOLUME dial to FULL SCAN and then press VOLUME dial to perform full scan.
3.3
Adjusting the volumeRotate the VOLUME dial to adjust the volume.
3.4
Switching OffPress the POWER button to switch off the radio, the button will restore to originally position.
3.5
1. In DAB+ mode, press and hold MENU button, rotate the VOLUME dial to Manual Tune and then press VOLUME dial to enter Manual Tune.
2. Rotate the VOLUME dial to the frequency you want to listen to and then press VOLUME dial to confirm. The radio will search the stations at this specific frequency.
3. When the searching is finished, you can select the stations at the frequency.
4.10 View DLS information
MENU button
In DAB+ mode, press MENU button to view DLS information.
4.11 Full Scan(DAB+)In DAB+ mode, press and hold MENU button, rotate the VOLUME dial to FULL SCAN and then press VOLUME dial to perform full scan. You may select the station you want to listen to from the scanned station list.
4.12 Manual Tune(DAB+)
4.8 Select FM frequencyIn FM mode, press the VOLUME dial and rotate to the frequency you want to listento , then press the VOLUME dial to confirm.
4.9 FM Station seekingIn FM mode, press the VOLUME dial and the FM frequency will flash, press again the VOLUME dial to seek for the nearest FM station.(Direction will be determined by last VOLUME dial direction.)
GO DAB DIGITAL RADIO
5. To turn off the Bluetooth function, switch to other mode or disable Bluetooth on your Bluetooth device.
4.4 AUX modeAUX-IN allows your GO Digital Radio quickly and easily to connect to external audio sources.
1. Press the MODE button repeatedly to select AUX mode and AUX will be flashing on the display.
2. Use a 3.5mm audio cable (not supplied) to connect your external audio device to the AUX socket at
the rear of the GO Digital radio.
3. In AUX mode, you may need to operate your external audio device for playback features.
4. For optimum volume levels, you may adjust the volume on the external audio device.
4.5 Charge modeThe charge mode allows your radio to charge up mobile phone.
1. Press the MODE button repeatedly to select Charging mode and Charging will be flashing on the display.
2. Use USB cable to connect your mobile phone to the USB socket at the rear of the DAB+ Digital radio.
4.6 Adjust Volume
VOLUME Dial
Rotate the VOLUME dial to adjust volume levels.
4.7 Select DAB+ StationIn DAB+ mode, press the VOLUME dial and rotate to the station you want to listen to, then press the VOLUME dial to confirm.
1.confirm.
4.13 Prune Station(DAB+)
1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm.
2. Rotate and press VOLUME dial to switch ON/OFF TREBLE|BASS according to your needs.
4.14 Equaliser
1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm.2. Rotate and press VOLUME dial to select Language.
4.16 Set Language
1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm.2. Rotate and press VOLUME dial to select TIMEOUT.
3. Select TIMEOUT interval(On,10,20,30,45,60,90,120,180) by rotating and pressing VOLUME dial.
4.15 Set Backlight
Set TIMEOUT:
1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm.2. Rotate and press VOLUME dial to select DIM LEVEL.
3. Select DIM LEVEL(HIGH | MEDIUM | LOW) by rotating and pressing VOLUME dial.
Set DIM LEVEL:
GO DAB DIGITAL RADIO
1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm.
2. Rotate and press VOLUME dial to select Factory Reset.3. Select Yes for Factory Reset.
4.17 Factory Reset
1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm.2. Rotate and press VOLUME dial to view Software Version.
4.18 Software Version
When you are listening to the DAB+/FM station you want to store, press and hold 1/2/3/4 button for 2 seconds to store the stations.
4.19 Storing DAB+/FM Presets
In DAB+/FM mode, press 1/2/3/4 button to recall the stored stations.
4.20 Selecting a Preset Station
PRESET button
www.goodmans.co.uk GO DAB DIGITAL RADIO
Problem What to do
There is no sound from my radio
Check that the volume is not set to the minimum.
Make sure that the radio has been able to locate DAB/FM stations.
The display shows ‘NO SERVICES in DAB+ mode
Make sure that DAB+ coverage exists in your area.
Try adjusting the position of the aerial or location of the radio.
Poor reception
As with any radio service, there will be areas of weak signal that may cause poor reception. Follow the instructions for Manual Tuning on 4.11 and adjust the aerial while monitoring the signal strength until the optimum signal is obtained. If reception is still poor, try re-locating the radio to another part of the room.
Some of the buttons on the DAB+ Digital Radio are not working
This may be caused by electrostatic discharge. Turn the DAB+ Digital Radio off, disconnect the mains plug and reconnect after a few seconds.
Make sure that the Bluetooth function is activated on your Bluetooth device.
on the Bluetooth deviceRe-pair the DAB+ Digital Radio with your Bluetooth device.
Troubleshooting5
I cannot find ‘GO’
Hyper-link ALL text tocorresponding sections
Model Number GO
Power Supply100-240V AC ~ 50/60HzAdapter: DC 5V, 2.5A
Speaker Output Power 1.8W x2 (AC Power), 1.0W x2 (Battery Power)
Frequency RangeFM: 87.5-108MHzDAB+: 174 - 240MHz
LCD Display B&W Dot Matrix LCD
Battery Capacity 4400mAh
Dimensions 200mm (W) x 95mm (D) x 60mm (H)
6
Customer Support7Our customer service team is available for technical or guarantee support. Visit www.goodmans.co.uk/support