USER MANUAL

MODEL: GOSTR, GOCANDY, GODASH

DAB+ Digital Radiowith Bluetooth and smartphone charging

GOHyper-link ALL text to

corresponding sections

Welcome1

Troubleshooting5

Technical Specifications6

Customer Support7

Your DAB+ Digital Radio2.1 In The Box2.2 Front View2.3 Rear View

2.4 Top View

2

Quick Setup3.1 Power On and Autoscan 3.2 Changing DAB+ Stations3.3 Scanning for DAB+ Stations3.4 Adjusting the Volume3.5 Switching Off

3

Features4MODE button4.1 DAB+ Mode4.2 FM Mode4.3 Bluetooth Mode

VOLUME Dial

4.4 AUX mode

4.5 Adjust Volume4.6 Select DAB+ Station4.7 Select FM frequency4.8 FM Station seeking

MENU button

4.9 Scan View DLS information(FM)4.10 Full Scan(DAB+)4.11 Manual Tune(DAB+)4.12 Prune Station(DAB+)

4.13 Equaliser4.14 Set Backlight4.15 Set Language4.16 Factory Reset4.17 Software Version

PRESET button

4.18 Storing DAB+/FM Presets4.19 Selecting a Preset Station

4.5 Charging Mode

WelcomeThank you for choosing this Goodmans product. We’ve been making electronics for the British people for 70 years. Each of our projects has been carefully designed to be great at what it does and this one is no exception. We hope you enjoy your new GO DAB+ Digital Radio.

1

Your DAB+ Digital Radio2In The BoxCarefully remove your DAB+ Digital Radio from the box.

• DAB+ Digital Radio• Mains power supply lead• Quick Start Guide• Guarantee Booklet

2.1

Mains Power

Your DAB/FM Radio requires a mains supply of 100-240V AV ~ 50/60Hz. Please ensure that your mains supply is compatible before use. Disconnect the Power Cord from the mains when not in use.

Position of DAB Digital Radio

Avoid the following locations:• Where it is exposed to direct sunlight • Where it is close to heat radiating sources • Where the humidity is high and ventilation is poor • Where it is dusty

Adjusting the AerialFully extend the aerial to ensure good reception in both DAB and FM Radio modes. It may be necessary to alter the position of the DAB Digital Radio and/or the aerial to achieve the best signal.

Place on a flat, stable surface that is not subject to vibrations.

Inside the box you will find:

GO DAB DIGITAL RADIO

Front View

Top View

2.2

Rear View2.3

2.4

LED Indicator

Red/Green – Charging/Fully Charged

Aerial

Micro USB SocketUsed to connect the radio to the mains power supply.

Aux-In SocketUsed to connect external audio sources.

USB SocketUsed to charge up mobile devices.

Reset Button

Power buttonPress to switch on/off.

Presets buttonsPress to store presets or recall preset station

A

B

C

D

E

F

G

H

Mode buttonPress to switch between DAB+, FM, Bluetooth and AUX mode.

MENU buttonPress to display DLS.Press and hold to display MENU options.

VOLUME DialPress and rotate to select DAB+/FMstation.Rotate to adjust volume.

I

J

K

GO DAB DIGITAL RADIO

A

B

G F I J K

CDEF

GO DAB DIGITAL RADIO

MODE button

Features4

DAB+ mode1. If the DAB+ radio is in DAB+ mode, press the MODE

button repeatedly until FM is shown on the display.

2. Press and hold MENU button, rotate the VOLUME dial to FULL SCAN and then press VOLUME dial to perform full scan.

4.1

4.2 FM Mode

4.3 Bluetooth Mode

1. If the DAB+ radio is in FM mode, press the MODE button repeatedly until DAB+ is shown on the display.

The DAB+ Digital Radio has Bluetooth capability. To pair the DAB+ Digital Radio with a Bluetooth device:

1. Press the MODE button repeatedly to select Bluetooth mode and ‘Bluetooth logo’ will be flashing on the display.

2. Activate your Bluetooth device and search for theDigital DAB+ radio.

3. ‘GO’ will appear on your Bluetooth device.

4. The name of Bluetooth device will appear once it is connected.

Quick Setup3 Power on and Autoscan1. Connect the power cable to the DAB Radio and mains power supply to charge up the radio.

2. Raise and extend the aerial.

3. Press down the POWER button to turn on the radio, it will autoscan automatically for first time usage.

3.1

Changing DAB+ stations1. Make sure it is in DAB+ mode.

2. Press the VOLUME dial and then scroll between the station you want to listen to.

3. Press the VOLUME dial again to confirm.

3.2

Scanning for DAB+ stations1. Make sure it is in DAB+ mode.

2. Press and hold the MENU button.

3. Rotate the VOLUME dial to FULL SCAN and then press VOLUME dial to perform full scan.

3.3

Adjusting the volumeRotate the VOLUME dial to adjust the volume.

3.4

Switching OffPress the POWER button to switch off the radio, the button will restore to originally position.

3.5

1. In DAB+ mode, press and hold MENU button, rotate the VOLUME dial to Manual Tune and then press VOLUME dial to enter Manual Tune.

2. Rotate the VOLUME dial to the frequency you want to listen to and then press VOLUME dial to confirm. The radio will search the stations at this specific frequency.

3. When the searching is finished, you can select the stations at the frequency.

4.10 View DLS information

MENU button

In DAB+ mode, press MENU button to view DLS information.

4.11 Full Scan(DAB+)In DAB+ mode, press and hold MENU button, rotate the VOLUME dial to FULL SCAN and then press VOLUME dial to perform full scan. You may select the station you want to listen to from the scanned station list.

4.12 Manual Tune(DAB+)

4.8 Select FM frequencyIn FM mode, press the VOLUME dial and rotate to the frequency you want to listento , then press the VOLUME dial to confirm.

4.9 FM Station seekingIn FM mode, press the VOLUME dial and the FM frequency will flash, press again the VOLUME dial to seek for the nearest FM station.(Direction will be determined by last VOLUME dial direction.)

GO DAB DIGITAL RADIO

5. To turn off the Bluetooth function, switch to other mode or disable Bluetooth on your Bluetooth device.

4.4 AUX modeAUX-IN allows your DAB+ Digital Radio quickly and easily to connect to external audio sources.

1. Press the MODE button repeatedly to select AUX mode and AUX will be flashing on the display.

2. Use a 3.5mm audio cable(not supplied) to connect your external audio device to the AUX socket at the rear of the DAB+ Digital radio.

3. In AUX mode, you may need to operate your external audio device for playback features.

4. For optimum volume levels, you may adjust the volume on the external audio device.

4.5 Charge modeThe charge mode allows your radio to charge up mobile phone.

1. Press the MODE button repeatedly to select Charging mode and Charging will be flashing on the display.

2. Use USB cable to connect your mobile phone to the USB socket at the rear of the DAB+ Digital radio.

4.6 Adjust Volume

VOLUME Dial

Rotate the VOLUME dial to adjust volume levels, there are totally 30 volume levels.

4.7 Select DAB+ StationIn DAB+ mode, press the VOLUME dial and rotate to thestation you want to listen to , then press the VOLUME dial to confirm.

1. In DAB+ mode, press and hold MENU button, rotate the VOLUME dial to Prune and then press VOLUME dial to confirm.

2. Rotate the VOLUME dial to the station you want to prune and then press VOLUME dial to confirm.

4.13 Prune Station(DAB+)

1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm.

2. Rotate and press VOLUME dial to switch ON/OFF TREBLE|BASS according to your needs.

4.14 Equaliser

1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm.2. Rotate and press VOLUME dial to select Language.

4.16 Set Language

1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm.2. Rotate and press VOLUME dial to select TIMEOUT.3. Select TIMEOUT interval(On|10|20|30|45|60|90|120|180) by rotating and pressing VOLUME dial.

4.15 Set Backlight

Set TIMEOUT:

1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm.2. Rotate and press VOLUME dial to select DIM LEVEL.3. Select DIM LEVEL(HIGH|MEDIUM|LOW) by rotating and pressing VOLUME dial.

Set DIM LEVEL:

GO DAB DIGITAL RADIO

1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm.

2. Rotate and press VOLUME dial to select Factory Reset.3. Select Yes for Factory Reset.

4.17 Factory Reset

1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm.2. Rotate and press VOLUME dial to view Software Version.

4.18 Software Version

When you are listening to the DAB+/FM station you want to store, press and hold 1/2/3/4 button for 2 seconds to store the stations.

4.19 Storing DAB+/FM Presets

In DAB+/FM mode, press 1/2/3/4 button to recall the stored stations.

4.20 Selecting a Preset Station

PRESET button

www.goodmans.co.uk GO DAB DIGITAL RADIO

Problem What to do

There is no sound from my radio

Check that the volume is not set to the minimum.

Make sure that the radio has been able to locate DAB/FM stations.

The display shows ‘NO SERVICES in DAB+ mode

Make sure that DAB+ coverage exists in your area.

Try adjusting the position of the aerial or location of the radio.

Poor reception

As with any radio service, there will be areas of weak signal that may cause poor reception. Follow the instructions for Manual Tuning on 4.11 and adjust the aerial while monitoring the signal strength until the optimum signal is obtained. If reception is still poor, try re-locating the radio to another part of the room.

Some of the buttons on the DAB+ Digital Radio are not working

This may be caused by electrostatic discharge. Turn the DAB+ Digital Radio off, disconnect the mains plug and reconnect after a few seconds.

Make sure that the Bluetooth function is activated on your Bluetooth device.

on the Bluetooth deviceRe-pair the DAB+ Digital Radio with your Bluetooth device.

Troubleshooting5

I cannot find ‘GO’

Hyper-link ALL text tocorresponding sections

Model Number GO

Power Supply100-240V AC ~ 50/60HzAdapter: DC 5V, 2.5A

Speaker Output Power 1.8W x2 (AC Power), 1.0W x2 (Battery Power)

Frequency RangeFM: 87.5-108MHzDAB+: 174 - 240MHz

LCD Display B&W Dot Matrix LCD

Battery Capacity 4400mAh

Dimensions 200mm (W) x 95mm (D) x 60mm (H)

6

Customer Support7Our customer service team is available for technical or guarantee support. Visit www.goodmans.co.uk/support