vgate - wordpress.com · chapter 6, “configuration” describes the vgate’s individual...
TRANSCRIPT
vGATE
Software version 16.1
TELES AG InformationstechnologienErnst-Reuter-Platz 810587 Berlin, GermanyPhone: +49 30 399 28-066Fax: +49 30 399 28-051E-mail: [email protected]
http://www.teles.com/
Software version: 16.1. Revised: 2 March 2011.
© Copyright 2011 TELES AG Informationstechnologien. All rights reserved. TELES®, IntraSTAR®, iGATE®, and iSWITCH® are registered trademarks of TELES AG
Informationstechnologien. All other trademarks used are the property of their respective owners.
All text and figures in this publication have been compiled with great attention to detail. Nonetheless, inaccuracies and typographical errors cannot be entirely avoided.
TELES AG Informationstechnologien provides this document ‘as is’ without warranty of any kind, expressed or implied. TELES AG Informationstechnologien reserves the
right to make changes in product design or specifications without notice.
Chapter 1 – About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
1.1 Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.2 Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.3 Safety symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Chapter 2 – Safety and security precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2.1 Safety measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62.2 Tips for EMC protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62.3 System security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62.3.1 Servicing the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.3.2 Replacing components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.3.3 Protecting the operating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.4 CDR files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82.5 Network security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Chapter 3 – Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
3.1 What’s new in version 16.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123.2 New Access Gateway product names starting version 16.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133.3 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143.4 How vGATE works. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153.5 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Chapter 4 – vGATE installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
4.1 Network and firewall requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184.2 vGATE SIM Unit hardware installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Chapter 5 – The vGATE Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
5.1 The SIM 60 Carrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205.2 Installing additional vGATE boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215.3 vGATE board LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Chapter 6 – Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
6.1 Configuration of the vGATE SIM Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246.2 Configuration of mobile gateways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Chapter 7 – vGATE Control Unit 16.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
7.1 vGATE Control Unit hardware installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297.2 Compatibility requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297.3 vGateConfig . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
1
Chapter 8 – vGATEDesktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
8.1 Automatic mobile gateway registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338.2 Setting up mobile gateways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338.3 Setting up groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 348.4 Setting up timezones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358.4.1 Editing and copying timezones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
8.4.2 Setting holidays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
8.4.3 Setting different rates for timezones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
8.5 Assigning SIMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388.5.1 Reserving SIMs to inactive timezones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
8.5.2 Assigning SIMs to active timezones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
8.5.3 Copying SIM assignment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
8.6 Setting time limits and pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418.7 Setting dynamic SIM pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448.7.1 Setting the coordinates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
8.7.2 Entering the coordinates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
8.7.3 Setting the time/distance ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
8.8 Setting carriers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 458.9 Configuring prepaid SIMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 538.9.1 Configuration in the mobile gateway. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Settings in the route.cfg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Settings in the pabx.cfg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
8.9.2 Defining prepaid SIMs on the vGATEDesktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Finding the balance parse string . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Calculating the balance factor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
8.9.3 Setting a change limit for prepaid SIMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
8.9.4 Entering autorecharge vouchers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
8.9.5 Recharge via USSD menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Settings in the pabx.cfg file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Settings in the route.cfg file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
8.9.6 SIM card balance transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Configuring master carrier and master SIM cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Configuring production carrier and production SIM cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Transfer script example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
8.10 Automatic mobile gateway configuration via vGATEDesktop . . . . . . . . . . . . . . . . . . . . . . . . . . . 628.11 SMS and call options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 648.11.1 Sending SMS and calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
8.11.2 Receiving SMS and calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
8.11.3 Defining SMS messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
8.11.4 Sending external SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
8.11.5 Retrieving a SIM’s own number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
8.12 Special services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
2
8.12.1 Script commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
8.12.2 Script example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
8.13 Defining the SIM’s protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 828.14 Decommissioning SIMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 838.15 Editing mobile gateways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 838.16 SIM history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 878.17 vGATE statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 908.17.1 SIM statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
8.17.2 Call statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
8.17.3 Call charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
8.18 What the information on the vGATEDesktop means . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 928.19 vGATEDesktop icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 968.20 Menu bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 988.21 vGATEDesktop toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 998.22 Context menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Chapter 9 – vGATECtrl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
9.1 Logging activity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1119.2 Sending error messages via e-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1129.3 Tearing down connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1129.4 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Chapter 10 – vGATEWatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Chapter 11 – Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
11.1 Starting the Windows2003 control unit without logon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11611.2 Remote access to the vGATE Control Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11611.3 Updating the SimServerDB database. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11711.4 Creating a backup of the database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11911.5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11911.6 Supported mobile gateways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
3
A B O U T T H I S M A N U A L
1 A B O U T T H I S M A N U A L
Congratulations on the purchase of your new vGATE! This manual is set up to guide you through the step-by-step
installation of your vGATE, so that you can follow it through from the front to the back.
Make sure you familiarize yourself thoroughly with the safety and security precautions detailed in Chapter 2before you begin to install your vGATE. TELES is not liable for any damage or injury resulting from a failure to follow
these safety and security instructions!
1 . 1 O R G A N I Z A T I O N
This manual is organized into the following chapters.
Chapter 1, “About this manual” introduces the vGATE Systems Manual and how it is set up.
Chapter 2, “Safety and security precautions” contains information about security issues relevant to
connection with the IP network.
Chapter 3, “Overview” briefly describes the vGATE and its implementation scenarios.
Chapter 4, “vGATE installation” contains information on how to connect and configure the system
so that it is ready for operation.
Chapter 5, “The vGATE Module” describes the vGATE Module, which consists of the vGATE Board
and the SIM 60 Carrier.
Chapter 6, “Configuration” describes the vGATE’s individual configuration files and parameters.
Chapter 7, “vGATE Control Unit 16.1” contains a description of the vGATE Control Unit, which is
responsible for administration of the vGATE and includes the applications vGateConfig, vGATEDesktop,
vGATECtrl, and a MySQL database.
Chapter 8, “vGATEDesktop” describes the frontend application used for administration of the
vGATE.
Chapter 9, “vGATECtrl” describes the vGATE Control Unit’s background server.
Chapter 10, “vGATEWatch” describes the watchdog function that causes vGATECtrl and/or the MySQL
database to restart if they shut down improperly.
Chapter 11, “Appendix” contains additional information that may be useful to you.
1 . 2 C O N V E N T I O N S
This document uses the following typographic conventions:
Bold – items from the GUI menu.
Halfbold – items from the GUI and the menu.
Code – file names, variables and constants in configuration files or commands in body text.
"Conventions" on page 4 – cross-references can be accessed in the PDF files by a single mouse click.
Configuration data or extracts are written in single-column tables with a gray background.
4
vGATE 16.1. Revised: 2 March 2011.
A B O U T T H I S M A N U A L
1 . 3 S A F E T Y S Y M B O L S
The following symbols are used to indicate important information and to describe levels of possible danger.
Note
Useful information with no safety implications.
Attention
Information that must be adhered to as it is necessary to ensure that the system func-tions correctly and to avoid material damage.
Warning
Danger. Could cause personal injury or damage to the system.
Dangerous voltage
Could cause injury by high voltage and/or damage the system.
Electrostatic discharge
Components at risk of discharge must be grounded before being touched.
ii
!!
!!
5
vGATE 16.1. Revised: 2 March 2011.
S A F E T Y A N D S E C U R I T Y P R E C A U T I O N S
C H A P T E R 2
2 S A F E T Y A N D S E C U R I T Y P R E C A U T I O N S
Please be sure and take time to read this section to ensure your personal safety and proper operation of your TELES
Infrastructure System.
To avoid personal injury or damage to the system, please follow all safety instructions before you begin working
on your TELES Infrastructure System.
TELES Infrastructure Systems are CE certified and fulfill all relevant security requirements. The manufacturer as-
sumes no liability for consequential damages or for damages resulting from unauthorized changes.
This chapter applies for all TELES Access Gateways. Information that applies only for individual systems specifies
the system for which it applies.
2 . 1 S A F E T Y M E A S U R E S
Danger of electric shock - the power supplies run on 230 V. Unplug the TELES Infrastructure System from its power
source before working on the power supply or extension socket.
Make sure to install the system near the power source and that the power source is easily accessible.
Bear in mind that telephone and WAN lines are also energized and can cause electric shocks.
Wire your system using only the cables included in the package contents. Use only proper ISDN and Ethernet cables.
Do not insert foreign objects into openings in the device. Conductible objects can cause short circuits that result in
fire, electric shock or damage to the device.
Do not open the TELES Infrastructure System except to install an additional TELES.Component. Changes in the de-
vice are not permitted.
Be sure to respect country-specific regulations, standards or guidelines for accident prevention.
2 . 2 T I P S F O R E M C P R O T E C T I O N
2 . 3 S Y S T E M S E C U R I T Y
This section describes all points crucial to the TELES Infrastructure System’s system security.
The system’s location must support normal operation of TELES Infrastructure Systems according to EN ETS 300 386.
Be sure to select the location with the following conditions in mind:
Use shielded cables.Do not remove any housing components. They provide EMC protection.
Location: Make sure you install the system in a clean, dry, dust-free location. If pos-sible, the site is to be air-conditioned. The site must be free of strong electrical or magnetic fields, which cause disrupted signals and, in extreme cases, system failure.
!!
6
vGATE 16.1. Revised: 2 March 2011.
S A F E T Y A N D S E C U R I T Y P R E C A U T I O N S
C H A P T E R 2
2 . 3 . 1 S E R V I C I N G T H E S Y S T E M
Regular servicing ensures that your system runs trouble-free. Servicing also includes looking after the room in which
the system is set up. Ensure that the air-conditioning and its filter system are regularly checked and that the pre-
mises are cleaned on a regular basis.
2 . 3 . 2 R E P L A C I N G C O M P O N E N T S
If your system contains any of the following components, replace them according to the following table:
Temperature: The site must maintain a temperature between 0 and 45°C. Be sure to guard against temperature fluctuations. Resulting condensation can cause short cir-cuiting. The humidity level may not exceed 80%. To avoid overheating the system, make sure the site provides adequate ventilation.
Power: The site must contain a central emergency switch for the entire power source.The site’s fuses must be calculated to provide adequate system security. The electri-cal facilities must comply with applicable regulations. The operating voltage and frequency may not exceed or fall below what is stated on the label.Antenna: iGATE contains no provision or protective device against power surges or lightning strikes.The installation of the antenna must fulfill all necessary safety requirements. Employ the services of a professional antenna installer.
To avoid damage to the vGATE SIM Unit, transport it only in the original packaging.
Table 2.1 Component Life Span
Component Life span
Filter pads 6 months
CPU fan (systems without TELES.iLCR Base Board only) 5 years
Power adapter incl. 3.3 V Adapter 5 years
Fan 5 years
Hard disk (IDE) (systems without TELES.iLCR Base Board only) 3 years
!!
!!
7
vGATE 16.1. Revised: 2 March 2011.
S A F E T Y A N D S E C U R I T Y P R E C A U T I O N S
C H A P T E R 2
2 . 3 . 3 P R O T E C T I N G T H E O P E R A T I N G S Y S T E M
Changing configuration data and/or SIM card positions may lead to malfunctions and/or misrouting, as well as pos-
sible consequential damage. Make changes at your own risk. TELES is not liable for any possible damage resulting
from or in relation to such changes. Please thoroughly check any changes you or a third party have made to your
configuration!
Make sure your hard disk or flash disk contains enough storage space. Downloading the log files and deleting them
from the system on a regular basis will ensure your system’s reliability.
Be careful when deleting files that you do not delete any files necessary for system operation.
vGATE Control Unit:
2 . 4 C D R F I L E S
Call Detail Records are intended for analysis of the system’s activity only. They are not designed to be used for
billing purposes, as it may occur that the times they record are not exact.
2 . 5 N E T W O R K S E C U R I T Y
Every day hackers develop new ways to break into systems through the Internet. While TELES takes great care to
ensure the security of its systems, any system with access through the Internet is only as secure as its user makes
it. Therefore, to avoid unwanted security breaches and resulting system malfunctions, you must take the following
steps to secure your TELES.System if you connect it to the Internet:
Use an application gateway or a packet firewall.
To limit access to the system to secure remote devices, delete the default route and add individual secure
network segments.
Access to the system via Telnet, SSH, FTP, HTTP, GATE Manager or remote vGATEDesktop must be
password protected. Do not use obvious passwords (anything from sesame to your mother-in-laws
maiden name). Remember: the password that is easiest to remember is also likely to be easiest to crack.
Do not perform queries on the database. This can result in damages to the database. Do not use any MySQL tools, such as MySQL-Front to make changes in or perform tests on the database.
vGATE Control Unit:Do not use Ctrl/Alt/Del (Task Manager) to shut down vGATEDesktop or vGATECtrl. Do not perform queries on the database. This can result in damages to the database. Do not use any MySQL tools, such as MySQL-Front to make changes in or perform tests on the database.
Inaccuracies in the generation of CDRs may occur for active connections if traffic is flowing on the system while modifications in configuration or routing files are acti-vated.
!!
!!
ii
8
vGATE 16.1. Revised: 2 March 2011.
S A F E T Y A N D S E C U R I T Y P R E C A U T I O N S
C H A P T E R 2
The firewall must support the following features:
Protection against IP spoofing
Automatic recognition of security breaches
Logging of all attempts to access the system
The firewall must be able to check the following information and only allow trusted users to access the TELES.Sys-
tem:
IP source address
IP destination address
Protocol (whether the packet is TCP, UDP, or ICMP)
TCP or UDP source port
TCP or UDP destination port
ICMP message type
For operation and remote administration of your TELES.System, open only the following ports only when the indi-
cated services are used:
Table 2.2 Default Ports Used for Specific Services
Service Protocol Port
For all systems except vGATE
FTP TCP 21 (default, can be set)
Telnet (for TELES debug access
only)
TCP 23 (default, can be set)
SMTP TCP 25
DNS forward UDP 53
HTTP TCP 80 (default, can be set)
SNTP UDP 123
SNMP UDP 161 (default, can be set)
H.225 registration, admission, sta-
tus
UDP 1719 (default, can be set)
H.225 signaling TCP 1720 (default, can be set)
Radius UDP 1812 (default, can be set)
Radius accounting UDP 1813 (default, can be set)
GATE Manager TCP 4445 (default, can be set)
SIP signaling UDP / TCP 5060 (default, can be set)
RTP UDP 29000-29120 (default, can be set)
9
vGATE 16.1. Revised: 2 March 2011.
S A F E T Y A N D S E C U R I T Y P R E C A U T I O N S
C H A P T E R 2
vGATE Control Unit TCP 57343
vGATE tunneling TCP 4446
For vGATE Control Unit and iMNP
FTP TCP 21
SSH TCP 22
MySQL database TCP 3306
iGATE or ECOTEL GSM to vGATE TCP 57342
vGATE tunneling to iGATE or ECOTEL GSM
TCP 4446
iGATE or ECOTEL GSM to iMNP TCP 9003
Remote vGATEDesktop TCP 57344
Remote vGATEDesktop (read only) TCP 57345
For vGATE SIM Unit
vGATE Control Unit plus iGATE or ECOTEL GSM
TCP 51500
For NMS
FTP TCP 21
SSH TCP 22
MySQL database TCP 3306
NMS protocol TCP 5000
NMS update TCP 5001
NMS task TCP 5002
NMS task TCP 5003
NMS Listen TCP 4444
For vGATE Call Manager
Radius authentication UDP 1812
Radius accounting UDP 1813
Table 2.2 Default Ports Used for Specific Services (continued)
Service Protocol Port
10
vGATE 16.1. Revised: 2 March 2011.
S A F E T Y A N D S E C U R I T Y P R E C A U T I O N S
C H A P T E R 2
Connection from a vGATE Control Unit to a iGATE requires ICMP access. The TCP fil-ters listed above are activated in the default configuration of the vGATE Control Unit or the NMS server.
ii
11
vGATE 16.1. Revised: 2 March 2011.
O V E R V I E W
C H A P T E R 3
3 O V E R V I E W
The vGATE is a system that enables more con-
venient management of a network of iGATE
and ECOTEL GSM or ECOTEL 3G systems (re-
ferred to as mobile gateways) running soft-
ware version 14.6 or higher.
All SIM cards in the network are installed in
and maintained from a central server, so that it
is no longer necessary to install SIM cards into
each mobile gateway. The vGATE can even re-
charge prepaid SIMs automatically. For details
on the requirements of the mobile gateways in
your vGATE, see Chapter 11.6 .
The vGATEDesktop makes it possible to assign
SIMs virtually to random ports and various times without physically removing the SIMs from the vGATE SIM Unit.
Virtual SIM allocation provides extra savings and security. Centralized SIM storage prevents theft of unattended
SIMs and reduces costs incurred by maintaining and assigning SIMs at individual mobile gateways.
3 . 1 W H A T ’ S N E W I N V E R S I O N 1 6 . 1
Faster reconnect to available gateways in case of accidentally broken TCP connections is now possible.
Last incoming USSD or SMS messages can be shown in vGATE desktop for every single SIM card. This
simplifies the handling of balance checks and recharges.
New balance transfer feature available.
Recharge via special service interface added.
SIM search algorithms can be combined.
SIM card release after recharge can now be suppressed.
Autorecharge - SIM cards that are blocked due to missing vouchers are automatically unblocked if new
vouchers are added.
The term mobile gateway covers the products iGATE, ECOTEL GSM, and ECOTEL 3G and is used throughout this manual.ii
12
vGATE 16.1. Revised: 2 March 2011.
O V E R V I E W
C H A P T E R 3
3 . 2 N E W A C C E S S G A T E W A Y P R O D U C T N A M E S S T A R T I N G V E R S I O N 1 6 . 1
Starting from release 16.1., TELES is dividing it’s access gateway product portfolio into VoIPBOX VoIP-ISDN gate-
ways, compact ECOTEL mobile radio gateways and flexibly configurable iGATE mobile radio gateway systems in a
19” chassis. The product names now clearly reflect the three different product lines. The following table lists the
old and new access gateway product names.
Table 3.1 New Access Gateway Product Names
Old AGW Product Names New AGW Product Names since version 16.1.
VoIPBOX BRI VoIPBOX BRI
VoIPBOX PRI VoIPBOX PRI
VoIPBOX GSM ECOTEL GSM
VoIPBOX UMTS ECOTEL 3G
iGATE GSM iGATE GSM
iGATE 3G iGATE 3G
13
vGATE 16.1. Revised: 2 March 2011.
O V E R V I E W
C H A P T E R 3
3 . 3 F E A T U R E S
Handles up to 600 SIMs per vGATE SIM Unit; up to twenty vGATE SIM Units (12,000 SIMs) can be attached
to a vGATE Control Unit
No need to travel to individual mobile gateways to replace SIM cards.
Cyclical use of multiple SIMs can occur on a single mobile channel.
Mobile channels in the mobile gateways can easily be assigned to different mobile networks.
Groups of mobile gateways can be defined and managed individually
Time frames can be defined for individual groups: SIMs can be assigned for specific times on specific
controllers or mobile gateways
Priority levels can be set for individual SIMs
Supports generation of SIM reports
Limits and pauses can be defined for how long a SIM card is to be active or inactive
More than one vGATEDesktop can be used
Supports and automatically recharges prepaid SIMs (USSD, DTMF, or SMS)
Can send and receive SMS and calls
Shows statistic values
Activation of Special Services for prepaid SIMs using automatic USSD, DTMF or SMS transmission
Time-controlled USSD or DTMF transmission
Random assign pause activation for individual SIMs following change of Timezones, boot indication and
Reset Maintenance
Color-coded routing
Possible to deactivate SIMs when Timezone changes
Special scripting interface for advanced options
Supports dynamic IP addresses of mobile gateways
Supports GSM, UMTS, and dual (UMTS/GSM) SIMs (as of vGATE SIM Unit Version 29)
Supports call prioritization
Call and SMS limits for SIMs
Possible to allow SIMs to be used once per day and gateway
Supports different rates for Timezones with new protocol
Password-protected connection between the vGATE and the vGATE SIM Unit
Remote tunneling for connection to the mobile gateways
Supports 3G SIMs on 2G controllers
Balance verification check for prepaid SIMs possible
Can set dynamic time/distance pauses between mobile gateways
Possible to retrieve a SIM’s call number based on its IMSI
Can run special scripts automatically for new SIMs
Additional receiver groups for calls and SMS can be defined
Possible to define a maximum number of calls per day on one SIM
Supports special parse actions
14
vGATE 16.1. Revised: 2 March 2011.
O V E R V I E W
C H A P T E R 3
Possible to log passive balance checks
Can define worst-case charges
Can define user registration information
Can copy holiday definitions from one group to another
Additional limits (A-C) definable for individual prefixes
Weekday specific maximum call duration possible
Supports multiple limits in relation to balance check of prepaid SIMs
Balance verification with tolerance in percentage and/or units possible
Supports balance checks for time values in answer to USSD or SMS balance checks
Mandatory or preferred advanced limits configurable for each controller
Can set SIM active release after maximum number of call attempts
Human behavior:
– Pause before SIM release
– Pause before first call
– Too many announcements detection
– Configurable recharge timeframe
– Configurable call generation timeframe
Can set a date to decommission SIM permanently
User Info can now be set for individual gateways
Get CDR retries limited to three attempts every six hours
Now possible to reset prepaid SIM limits to 0 on a definable day
Can prioritize prepaid SIMs with 0 limit for assignment
Can set SIMs to receive lower priority when limit falls below definable amount
3 . 4 H O W v G A T E W O R K S
You maintain control over when each SIM is
assigned to which port on which mobile gate-
way and for how long.
Figure 3.1 shows how SIMs can be assigned to
various iGATEs at different times. You deter-
mine when a SIM is active on a specific iGATE.
For example, you can assign a carrier’s SIM to
an iGATE during a particularly inexpensive tar-
iff and to another when traffic to that carrier is
particularly heavy.
Figure 3.1 Timezones and Limits
15
vGATE 16.1. Revised: 2 March 2011.
O V E R V I E W
C H A P T E R 3
You can also set time limits and pauses for individual SIMs. After a SIM has been used for the amount of time set,
it will be moved to another port or permanently released from the vGATE. If you set a pause, the SIM take a break
for the amount of time set after each use.
Figure 3.2 shows how you can distribute SIM
activity so that SIMs from each carrier are dis-
tributed to different ports on the same mobile
gateway. For example, you may distribute traf-
fic from one carrier through the first ten ports
on each iGATE, traffic from another through
the next ten ports and traffic from a third
through the next ten ports.
The vGATE is designed to provide you with op-
timal flexibility and your SIMs with optimal mo-
bility.
Figure 3.2 Carrier Distribution
16
vGATE 16.1. Revised: 2 March 2011.
O V E R V I E W
C H A P T E R 3
3 . 5 C O M P O N E N T S
Each vGATE consists of the following:
One vGATE Control Unit:
Contains the vGATE’s database and administration software
At least one vGATE SIM Unit:
Contains all of the SIM cards in the vGATE
At least one iGATE, ECOTEL GSM, or ECOTEL 3G:
Routes GSM traffic
Each vGATE SIM Unit contains:
Up to ten vGATE Modules which consist of a vGATE Board and a SIM 60 Carrier. Up to 60 SIM cards can
be inserted into the SIM 60 Carrier.
All SIMs are inserted into the central vGATE SIM Units, so that none are required in the individual mobile gate-
ways,.,
The vGATE SIM Unit Version 29 is compatible only with vGATE Version 12.0 or higher.
ii
17
vGATE 16.1. Revised: 2 March 2011.
v G A T E I N S T A L L A T I O N
C H A P T E R 4
4 v G AT E I N S T A L L A T I O N
This section contains information on basic installation and configuration of your vGATE.
Implementation of individual scenarios requires adjustments to the appropriate interfaces. Tips for basic settings
are described here. Links to relevant chapters are provided for more specific configuration changes.
4 . 1 N E T W O R K A N D F I R E W A L L R E Q U I R E M E N T S
Before installing your vGATE, make sure you can fulfill the following network and firewall requirements:
A PING must be possible from the vGATE Control Unit to all mobile gateways and vGATE SIM Units.
Message round-trip time must be less than 500 ms. You can use PING to measure the round-trip time.
No components (mobile gateways, vGATE Control Unit, vGATE SIM Units) may be behind a PAT (Port
Address Translation) firewall, as ports 51500, 57342, 57343, 57344, 57345 and 3306 may not be
changed.
Connection setup must be possible in both directions at all times.
The autohangup timer of a router or dial-up connection must be greater than 20 seconds. If you configure
the parameter LimitWOdisc=On in the pabx.cfg, you must switch off the autohangup function.
We recommend that you install the vGATE Control Unit and vGATE SIM Units in the same location,
connected with a bandwidth of 100 MBit/s. If they are not installed in the same location, the bandwidth
between them must be at least 2MBit/s in both directions.
The vGATE SIM Unit Version 29 is compatible only with vGATE Version 12.0 or higher.
Use a UPS to avoid possible damage resulting from power interruptions.
ii
ii
18
vGATE 16.1. Revised: 2 March 2011.
v G A T E I N S T A L L A T I O N
C H A P T E R 4
4 . 2 v G A T E S I M U N I T H A R D W A R E I N S T A L L A T I O N
The vGATE SIM Unit holds up to 10 vGATE Modules. At up to 60 SIM cards per SIM 60 Carrier, a single vGATE SIM
Unit contains up to 600 SIM cards. As shown in Figure 4.1, the first three slots are empty and the vGATE Modules
are inserted from left to right.
Figure 4.1 vGATE: Rear View
Table 4.1 describes the numbered arrows shown in Figure 4.1.
Table 4.1 vGATE SIM Unit: Assembly
Number Description
1. Connect the vGATE SIM Unit to the Ethernet here.
2. Each vGATE Board has a slot for a SIM 60 Carrier. Insert the SIMs in the SIM 60 Carrier and
then insert the SIM 60 Carrier here (see Chapter 5 on page 5-20). The hardware addresses for
the vGATE Boards start with D000 on the left and go to D900 in ascending order.
NOTE: The PIN for all SIMs must be 0000.
3. Plug the power cord in here.
4. Plug your keyboard into one of these two outlets.
5. Plug your monitor in here.
19
vGATE 16.1. Revised: 2 March 2011.
T H E v G A T E M O D U L E
C H A P T E R 5
5 T H E v G AT E M O D U L E
Each vGATE SIM Unit consist of up to ten vGATE Modules. Each vGATE Module consists of one vGATE Board and
one SIM 60 Carrier, which can be inserted into and removed from the back of the vGATE Board during operation.
The SIM 60 Carrier contains the SIM cards for the individual mobile channels. Up to 60 SIM cards can be assigned
to individual mobile channels at random.
5 . 1 T H E S I M 6 0 C a r r i e r
SIM cards are mounted on the front and back of the SIM 60 Carrier (Figure 5.1). As a guide to help you distinguish
top from bottom, the SIMs are numbered at the top and bottom near the center of the SIM 60 Carrier, as shown
in Figure 5.1. You can select the SIM cards you would like to use via the vGATEDesktop.
When the SIM 60 Carrier is properly inserted, the second LED from the bottom will flash quickly for 5 seconds and
then slowly. If the LED remains off or does not stop flashing quickly, insert the SIM 60 Carrier more firmly.
Figure 5.1 SIM 60 Carrier – Front and Rear View
Insert ONLY the SIM 60 Carrier into the vGATE Board! Make sure all SIMs are clean and grease free and that their mounts are properly closed.ii
20
vGATE 16.1. Revised: 2 March 2011.
T H E v G A T E M O D U L E
C H A P T E R 5
5 . 2 I N S T A L L I N G A D D I T I O N A L v G A T E B O A R D S
The system is only to be installed, replaced or maintained by properly trained technicians. Before installation, the
following information must be read and understood.
The vGATE Board contain components which are vulnerable to electrostatic (ESD -Electrostatic discharge Sensitive
Devices, also known as EGB). Electrical discharge can cause malfunctions or complete system failure. You must
therefore observe the following guidelines:
Wear an ESD wristband as protection from electrostatic discharge. Connect it to the “ESD bonding point”
(system earth).
Discharge equipment, instruments or metal objects, which come in contact with the vGATE Boards so that
they are earthed.
Avoid contact between the vGATE Boards and your clothing.
Do not wear synthetic clothing or shoes with plastic soles.
Avoid strong electrical constant fields, such as cathode ray indicators, monitors, etc.
To install an additional vGATE Board, attach a keyboard and monitor the vGATE SIM Unit and use the keyboard to
logon to the vGATE SIM Unit as root with the password beamup. Exit the vGATE SIM Unit’s software by entering
shutdown -h now in the command line. Turn off the system’s power when the message Power down ap-
pears.
Set the memory range on each new vGATE Board you install. Boards are numbered D000 to D900 from left to right
in ascending order when looking at the rear of the system, as shown in Figure 5.2.
Figure 5.2 vGATE Board: Memory Range Settings
You must shut down the system’s power when the message Power down appears before installing any new hardware. Failure to do so will result in damage to the sys-tem’s hardware and software.
Danger of electric shock. The mains adapter is loaded with 230 V. You must detach the vGATE SIM Unit from the power supply before you open the housing.
Unscrew and remove the vGATE SIM Unit’s lid and the bracket on top of the boards.
!!
21
vGATE 16.1. Revised: 2 March 2011.
T H E v G A T E M O D U L E
C H A P T E R 5
Turn the dials in the right-hand corner of each vGATE Board until the arrows point to the corresponding letter and
number. In Figure 5.3, the dials have been set at D and 1, for a hardware address of D100. This card will appear
in the second slot in the vGATE SIM Unit. Bear in mind that each vGATE Board must have a different address.
Make sure the new vGATE Board does not contain a SIM 60 Carrier. Not following the correct procedure to replace
the vGATE Board can result in damage to the contacts or conductors. Insert the vGATE Board in the next available
slot and screw it into place. Replace and secure the bracket and lid.
Reconnect the power supply and turn on the vGATE SIM Unit. The software will automatically recognize the new
hardware within five minutes.
Figure 5.3 vGATE Board: How to Set the Memory Range
22
vGATE 16.1. Revised: 2 March 2011.
T H E v G A T E M O D U L E
C H A P T E R 5
5 . 3 v G A T E B O A R D L E D S
Each vGATE Board has eight LEDs that provide a quick over-
view of the vGATE Board’s operational status.
Each of the upper six LEDs shows the status of ten of the
SIMs inserted in the vGATE Board. The second LED from the
bottom shows the status of the database connection. The
bottom LED shows whether any of the SIMs are currently be-
ing accessed.
Table 5.1 provides an overview of what the individual LEDs
mean.
Table 5.1 vGATE Board LEDs
LED Meaning
SIM states: Upper six LEDs
On All ten SIMs are operational.
Slowly flashing At least one, but not all, of the ten SIMs is operational.
Quickly flashing At least one of the ten SIMs has an error.
Off All ten SIM positions are empty.
Database connection: Second LED from the bottom
On The vGATE Board is connected to the database.
Off The vGATE Board is not connected to the database.
Flashing: 5 seconds quickly, then
slowly
The SIM 60 Carrier is initializing.
SIM access: bottom LED
On At least one of the SIMs in the vGATE Board is being accessed.
Off None of the SIMs in the vGATE Board are being accessed.
Figure 5.4 vGATE Board LEDs
23
vGATE 16.1. Revised: 2 March 2011.
C O N F I G U R A T I O N
C H A P T E R 6
6 C O N F I G U R A T I O N
Operation of the vGATE depends on the following configuration entries:
6 . 1 C O N F I G U R A T I O N O F T H E v G A T E S I M U N I T
The vGATE SIM Unit is a Linux system that makes use of an Ethernet interface.
The eth0 interface enables the vGATE SIM Unit to communicate with the connected mobile gateways and the
vGATE Control Unit. Settings for this interface can be adjusted to adapt with the needs of individual networks.
After you have installed your vGATE SIM Unit as described in Chapter 4.2 , log onto the vGATE SIM Unit as
root and enter beamup at the password prompt.
If your vGATE SIM Unit is accessible from the Internet, make sure the password for root is secure. You can change
the password using the passwd command.
Delete the vgate user with the following command: userdel -r vgate
and set up a different, secure user and password with: adduser
Editing the IP address using the netconfig tool
To edit the IP address with the netconfig tool, log on as a superuser with the username root and the password
beamup.
Enter netconfig and hit Enter. Answer the queries in the dialog boxes that appear. Table 6.1 contains a de-
scription of the queries and the appropriate responses. When you have finished, restart the system by enterin
reboot-n.
Support for UMTS SIMs occurs only with vGATE SIM Unit software version 28 or high-er. If your vGATE SIM Unit is running an older version, the software must be updated. The vGATE SIM Unit Version 29 is compatible only with vGATE Version 12.0 or higher.
Table 6.1 netconfig Dialog Boxes
Dialog Box Information
ENTER HOSTNAME Enter the vGATE SIM Unit’s hostname (e.g. simunit1)
ENTER DOMAINNAME FOR Enter the domain name (e.g. teles.de).
SETUP IP ADDRESS FOR Select the STATIC IP ADDRESS option.
ENTER IP ADDRESS FOR Enter the IP address.
ii
24
vGATE 16.1. Revised: 2 March 2011.
C O N F I G U R A T I O N
C H A P T E R 6
Editing the IP address using vi
To make any necessary changes to the configuration of the IP address for the network card (eth0), open the
rc.inet1.conf file in the /etc/rc.d folder. Adjust your settings as required:
ENTER NETMASK FOR LOCAL
NETWORK
Enter the netmask.
ENTER GATEWAY
ADDRESS
Enter the gateway’s IP address.
USE A NAMESERVER? If you select Yes, enter the name server’s IP address.
CONFIRM NETWORK SETUP Make sure you check all of your entries! To make changes, select Restart.
If you are satisfied, select Accept. Confirm your accepted settings by hitting
Enter.
# /etc/rc.d/rc.inet1.conf## This file contains the configuration settings for network interfaces.# If USE_DHCP[interface] is set to "yes", this overrides any other settings.# If you don't have an interface, leave the settings null (""). # Config information for eth0:IPADDR[0]="172.20.25.130"NETMASK[0]="255.255.0.0"USE_DHCP[0]=""DHCP_HOSTNAME[0]="" # Config information for eth1:IPADDR[1]=""NETMASK[1]=""USE_DHCP[1]=""DHCP_HOSTNAME[1]="" # Config information for eth2:IPADDR[2]=""NETMASK[2]=""USE_DHCP[2]=""DHCP_HOSTNAME[2]="" # Config information for eth3:IPADDR[3]=""NETMASK[3]=""USE_DHCP[3]=""DHCP_HOSTNAME[3]="" # Default gateway IP address:GATEWAY="172.20.0.1" # Change this to "yes" for debugging output to stdout. Unfortunately,# /sbin/hotplug seems to disable stdout so you'll only see debugging output# when rc.inet1 is called directly.DEBUG_ETH_UP="no"
Table 6.1 netconfig Dialog Boxes
Dialog Box Information
25
vGATE 16.1. Revised: 2 March 2011.
C O N F I G U R A T I O N
C H A P T E R 6
For those unfamiliar with the vi editor, follow these steps:
Enter cd /etc/rc.d and press the return key.
Enter vi rc.inet1.conf and press the return key.
Use the arrow keys to move the cursor to the IP address following the open quotation mark and delete the
old IP address using the delete key.
Press the i key to enter insert mode and insert the new IP address.
Delete and enter any other information you would like to change.
Press the escape key to exit insert mode.
Enter :wq to save and exit and then restart the computer with reboot -n.
Setting a password for connection from vGATECtrl to the vGATE SIM Unit
To set a password to connect with the vGATE SIM Unit from the vGATECtrl, you must first stop the SIM-server pro-
cess with stopvgate. Using the vi editor, follow these steps:
Enter cd /usr/local/bin and press the return key.
Enter vi startvgate and press the return key.
Use the arrow keys to move the cursor to the space in front of the & sign.
Enter the incrypted password as it appears in vGateConfig as follows: Press the i key to enter insert mode
and insert -w <encryption>. Bear in mind that this entry is case sensitive.
Press the escape key to exit insert mode.
Enter :wq to save and exit.
Restart the SIM-server process with startvgate and press the return key.
Example: We want to set the password test. In vGateConfig, we enter the password test for the vGATESIM Unit. It appears as SGVU. We set the password in the startvgate script as follows:
6 . 2 C O N F I G U R A T I O N O F M O B I L E G A T E W A Y S
The following configuration entries must be made in each mobile gateway in the network.
#!/bin/shecho “starting simser...”/usr/local/bin/simser -p /usr/local/bin/vgate_isa.bit -c/usr/local/bin/vgate_carrier.bit -l /var/log/vgate.log -w SGVU &
Do not configure SIMs in the vGATE and mobile gateway simultaneously. This can lead to database failures. Be sure to remove the SIM-card carrier from the mobile gateways used with the vGATE.
!!
26
vGATE 16.1. Revised: 2 March 2011.
C O N F I G U R A T I O N
C H A P T E R 6
Configuration in the pabx.cfg
The SIMS parameter allows you to connect the system to a vGATE. The first SIM must be defined in the appropriate
mobile controller Subscriber line.
Example 1 The following example is for iGATE GSM only. Example 2 shows how to configure ECOTEL GSMand Example 3 shows how to configure iGATE 3G:
Example 2 The following example is for ECOTEL GSM only. Example 1 shows how to configure iGATE GSMand Example 3 shows how to configure iGATE 3G:
Example 3 The following example is for iGATE 3G only. Example 1 above shows how to configure iGATEGSM and Example 2 shows how to configure ECOTEL GSM:
The vGATE Control Unit’s IP address must appear in the category IP Configuration in the [System] sec-
tion of the mobile gateway’s pabx.cfg file:
SimCtrlUnitAddress=<ip addr>
Configure an additional controller in the last position for DTMF functionality as follows:
Example:
The corresponding Subscriber line will look like this:
This parameter cannot be used with the following parameters: <SIM24>, <SIMV> and <SIM+>.
...Subscriber00=TRANSPARENT ROUTER GSM[0000,00000,+000000,1,1,1,SIMS] CHADDR ALARM NEXTSubscriber01=TRANSPARENT ROUTER GSM[0000,00000,+000000,1,1,1,SIMS] CHADDR ALARMSubscriber02=TRANSPARENT ROUTER GSM[0000,00000,+000000,1,1,1,SIMS] CHADDR ALARMSubscriber03=TRANSPARENT ROUTER GSM[0000,00000,+000000,1,1,1,SIMS] CHADDR ALARM...
...Subscriber04=TRANSPARENT ROUTER GSM[0000,00000,+000000,1,1,1,SIMS] CHADDR ALARM NEXTSubscriber05=TRANSPARENT ROUTER GSM[0000,00000,+000000,1,1,1,SIMS] CHADDR ALARMSubscriber06=TRANSPARENT ROUTER GSM[0000,00000,+000000,1,1,1,SIMS] CHADDR ALARMSubscriber07=TRANSPARENT ROUTER GSM[0000,00000,+000000,1,1,1,SIMS] CHADDR ALARM...
...Subscriber00 = TRANSPARENT ROUTER UMTS[0000,00000,+00000,1,1,1,SIMS,BAND(1)] CHADDR ALARM NEXTSubscriber01 = TRANSPARENT ROUTER UMTS[0000,00000,+00000,1,1,1,SIMS,BAND(1)] CHADDR ALARM Subscriber02 = TRANSPARENT ROUTER UMTS[0000,00000,+00000,1,1,1,SIMS,BAND(1)] CHADDR ALARMSubscriber03 = TRANSPARENT ROUTER UMTS[0000,00000,+00000,1,1,1,SIMS,BAND(1)] CHADDR ALARM...
Controller36=41DTMF
Subscriber36=TRANSPARENT ROUTER DTMF[60] CHMAX[5]
ii
27
vGATE 16.1. Revised: 2 March 2011.
C O N F I G U R A T I O N
C H A P T E R 6
Do not use GSM SIMs on UMTS iGATEs or vice versa.
ii
28
vGATE 16.1. Revised: 2 March 2011.
v G A T E C O N T R O L U N I T 1 6 . 1
C H A P T E R 7
7 v G AT E C O N T R O L U N I T 1 6 . 1
Administration of the vGATE occurs through the vGATE Control Unit, which is a 1HU, 19” PC. The vGATE Control
Unit includes the following:
vGateConfig is a configuration tool with a graphical interface used to configure the vGATE Control Unit.
vGATEDesktop is a frontend application used for controller assignment and SIM administration.
vGATECtrl is a background server process with an attached database that communicates with the vGATE
SIM Unit and the mobile gateways.
MySQL V. 5.1.43 database contains information on all SIMs in the vGATE.
The user name and password to log onto the vGATE Control Unit are
simdbuser and simdb, respectively.
7 . 1 v G A T E C O N T R O L U N I T H A R D W A R E I N S T A L L A T I O N
Figure 7.1 vGATE Control Unit: Rear View
Figure 7.1 provides a rear view of the vGATE Control Unit.
7 . 2 C O M P A T I B I L I T Y R E Q U I R E M E N T S
vGATE Control Unit 16.1 is compatible with mobile gateway systems running software version 14.6 or higher, and
requires MySQL Version 5.1.43. Do not use or mix with lower versions.
29
vGATE 16.1. Revised: 2 March 2011.
v G A T E C O N T R O L U N I T 1 6 . 1
C H A P T E R 7
7 . 3 v G a t e C o n f i g
The configuration tool vGateConfig is used to configure the vGATE.
Database
The default Name of the database is SIMServerDB and may not be changed. Do not change the User name
simdbuser or the Password simdb. Enter its Host address. The default period (.) entered here represents named
pipes and is to be left as is if you are using a local host. 3306 is the default Port for MySQL. If you change this
port, you must also enter the new port number here. Enter the Pipe Name MYSQL.
Frontend server
The frontend server is the vGATE Control Unit. The default Host is localhost. Do not change the default Port.
Enter a Password and a Password (read only) if you would like to have password-protected access.
For information on how to set up a remote vGATEDesktop, see Chapter 11.2 .
You must restart vGATECtrl following any changes made after the initial configura-tion.
Figure 7.2 vGateConfig
ii
30
vGATE 16.1. Revised: 2 March 2011.
v G A T E C O N T R O L U N I T 1 6 . 1
C H A P T E R 7
vGATE SIM Unit
Double-click to edit entries. Enter the vGATE SIM Unit’s IP address in the Host box. Do not change the default
Port. Up to 20 vGATE SIM Units can be defined. Use the context menu to edit, add or delete vGATE SIM Units
from the list. If you use a NAT firewall to translate the vGATE SIM Units’ private IP addresses into public addresses,
you must also enter the vGATE SIM Units’ public IP address at Public Host and Public Port. The connection from
vGATECtrl to the vGATE SIM Unit is password protected when you enter a Password. You must also enter the
password in the vGATE SIM Unit ("Setting a password for connection from vGATECtrl to the vGATE SIM Unit" on
page 26
Gateways
Do not change the default Port.
Default PIN
The PIN entered here will apply for all of the SIMs. The default PIN for all SIMs is 0000 and cannot be changed.
Only one vGATEDesktop can be open at a time. Activate If new desktop tries to connect, close connection
to old desktop to close an open vGATEDesktop when another vGATEDesktop tries to open. A dialog will appear
on the old vGATEDesktop, from which you can choose to leave the vGATEDesktop open with read-only rights or
close the vGATEDesktop.
If this box is not checked, any second vGATEDesktop will only be able to start with read-only rights or not at all.
31
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 v G AT E D e s k t o p
The vGATEDesktop is a frontend application used for administration of the vGATE. All SIMs and mobile gateways
can be maintained from a central location using this application.
The vGATEDesktop allows you to group mobile gateways together for a targeted overview of activity. SIMs can be
assigned to any mobile gateway connected to the vGATE SIM Unit at any time of day, making it easy to move SIM
activity from one location to another.
The vGATEDesktop contains four windows, from which SIMs can be assigned to specific mobile gateway controllers
for specific times. The columns in each window can be rearranged by drop and drag and renamed by right-clicking
the column headings. Figure 8.1 shows the contents of each window as follows:
groups: Lists groups of mobile gateways.
mobile gateways: Lists all mobile gateways in the selected group.
controllers: Lists all mobile ports on the selected mobile gateway.
SIMs: All or filtered list of SIMs in the vGATE.
Show Positions: The first drop-down list allows you to filter the SIMs displayed based on SIM positions.
The second allows you to filter based on SIM activity and assignment.
timezones: Shows the times when SIMs are active on specific controllers.
The vGATECtrl application must be started before the vGATEDesktop. Do not open a second vGATEDesktop if one is already open, as this will cause the first to close. Make sure you set the clock on the vGATE Control Unit accordingly!
ii
groups
mobile SIMs
timezones
Figure 8.1 vGATEDesktop
filters
controllers (ports)
gateways
Show Positions
32
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 1 A U T O M A T I C M O B I L E G A T E W A Y R E G I S T R A T I O N
As soon as mobile gateways have been configured and connected to the vGATE, they must be restarted for auto-
matic registration.
The respective windows shown in Figure 8.2 will then automatically list the connected mobile gateways and their
empty controllers. The inset shows what the icons will look like in the case of an iGATE 3G.
As soon as a mobile gateway is configured as part of the vGATE, it is automatically assigned to the Default
Group.
The following sections will guide you through a step-by-step example of how to set up your vGATEDesktop.
8 . 2 S E T T I N G U P M O B I L E G A T E W A Y S
To be able to distinguish one mobile gateway from another, it is useful
to give it a meaningful name. To rename mobile gateways, right-click
the mobile gateway you want to rename and select Edit from the con-
text menu.
Enter the new Name in the window that appears.
Click OK to activate changes.
If dynamic IP-address allocation is used on the mobile gateway, you
must set the following entry in the pabx.cfg:
SimCtrlUnitCheckInterval=<sec>
We recommend defining 60 seconds for this parameter.
For a detailed description of all of the entries in this dialog, see Chapter 8.15
Figure 8.2 iGATE registration
Figure 8.3 Context Menu
ii
33
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 3 S E T T I N G U P G R O U P S
Once you have named your mobile gateways, you may want to assign them to groups that will provide you with a
more targeted overview of the mobile gateways in your network.
In our example, we have four iGATEs, which we have named Berlin, Chicago, Munich and New York. All
iGATEs are assigned to the Default Group at installation. To define the default group, select Default Group for
New GWs from the context menu.
First we want to give the default group a meaningful
name. To rename a group, right-click the group, se-
lect Edit Group and enter the new name in the pop-
up dialog.
For our example, we have renamed the default group
Germany. To create new groups, right-click in the
window and select Create Group. Enter the name
of the new group in the pop-up dialog. We have
named our new group USA. Ignore the rest of the di-
alog for now.
Now we have two groups and four iGATEs. All four iGATEs belong to the group named Germany.
We want the iGATEs Berlin and Munich to remain in the
Germany group and the Chicago and New York iGATEs
to move to the USA group.
To move iGATEs to another group, right-click the name of
the iGATE and select Change Group from the context
menu. Choose the group from the drop-down list and click
OK.
When we click either one of our groups, only the iGATEs in
that group will appear in the list of iGATEs.
You can also use drag and drop to assign mobile gateways to groups.
Figure 8.4 Setting Groups
Figure 8.5 Setting Groups
ii
34
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 4 S E T T I N G U P T I M E Z O N E S
Using the slide control at the top of the vGATEDesktop, you can easily set the times, called timezones, when SIMs
are active for individual controllers. The SIMs in a particular timezone will automatically activate and deactivate at
the times set. This function allows you to move SIM activity from one time and place to another.
For our example, we will first set timezones for one group. We click the
Germany group to activate its timezones. We want to set a timezone
from Tuesday at 6:00 p.m. to Wednesday at 8:00 a.m. To add a marker to
the slide control, we press Ctrl and left-click the mouse approximately
where the new marker is to appear. Then we use the mouse to slide the
marker to 8:00.
After we have added the second marker, we will use another method to
set it: we right-click the new marker and set the time using the arrows in
the pop-up dialog that appears. If Use SIMs started on same GW is ac-
tive, the same SIMs used at the beginning of the day will be assigned for
this timezone if they are available.
Using either of these two methods, you can set timezones for each group. The timezones will be the same for each
mobile gateway in the group, but the SIMs assigned to each timezone may differ, depending on your individual
setup.
The total number of timezones for all groups may not exceed 85.
Figure 8.6 Setting Timezones
Figure 8.7 Setting Timezones
ii
35
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 4 . 1 E D I T I N G A N D C O P Y I N G T I M E Z O N E S
You can also edit timezones by selecting Timezones List from
the View menu. A dialog listing all of your timezones appears.
Right-click a timezone or an empty space to Edit, Add or De-
lete a timezone.
Drag and drop with the right mouse button to copy the contents
of one timezones into another for one or all mobile gateways in
the group.
To copy the contents of all timezones from one mobile gateway
to another in the same group, go to the mobile gateway view
and right-click the mobile gateway to copy. Select Copy Time-
zone Configuration to GW. Select the mobile gateway to
which you want to copy from the drop-down menu and click
OK.
To copy the contents of an entire timezone into another, open
the Timezones List and right-click the timezone to be copied.
Drag the cursor to the timezone you want to copy into. Select
Copy Timezone Configuration from the pop-up menu and
follow the directions that appear. To copy only differing rates
from one timezone to another, select Copy Differing Rates
from the pop-up menu. Only carriers with differing rates will be
copied, but all previous carrier entries in the new timezone will
be deleted. For more information about different rates, see
Chapter 8.4.3 .
To prevent inadvertent timezone changes, activate Inhibit Modification of Timezones in the vGATEDesktop’s
Options menu. This will lock all timezones into place so that they cannot be changed. Make sure this option is
inactive before attempting to edit the timezones.
Figure 8.8 Copying Timezones
36
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 4 . 2 S E T T I N G H O L I D A Y S
Using the Holiday slide control to the right, you can also set
special times for holidays. Click the icon in the toolbar
or select Holidays List from the View menu. Select Add or
Edit from the context menu and use the drop-down calendar
to set a Date. Enter a Name for the holiday and click OK.
8 . 4 . 3 S E T T I N G D I F F E R E N T R A T E S F O R T I M E Z O N E S
You can set different rates for various carriers within the same timezone and copy them from one timezone to an-
other. This applies for all carriers entered in the carrier list.
Select Edit Differing Rates from the Timezones List to open the Timezones Rates List. Open the Edit Dif-
ferent Rates dialog by selecting Edit, Add or Delete rates from the context menu.
The vGATEDesktop’s date and clock are set according to the clock on the vGATE Con-trol Unit, which appears in the bottom right-hand corner of the vGATEDesktop. Tim-ezones are set and change according to this clock and not according to the clock on the PC on which the vGATEDesktop is installed. Make sure you set the clock on the vGATE Control Unit accordingly!
Figure 8.9 Setting Holidays
ii
Figure 8.10 Timezones Rate List
37
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Select a Carrier from the drop-down list. Enter the
currency unit that is used to calculate charges per
minute in the Currency Unit/Minute box. The Bal-
ance Factor is calculated automatically. As of Ver-
sion 14.6 of all mobile gateways, up to two decimal
places will be calculated. Enter the number of sec-
onds for which the first charge unit is calculated in
the Charge Unit First box. In the Charge Unit
Generate box, enter the number of seconds for
which all subsequent charge units are calculated. In
the Remaining Balance box, enter the number of
currency units that are to remain on the SIM when it is blocked or recharged.
For a description of how to copy the rates from one timezone to another, see Chapter 8.4.1 .
8 . 5 A S S I G N I N G S I M S
Once you have set a group’s timezones, you can begin to assign SIMs for each controller and its timezones.
The timezones are color-coded as follows: green means the timezone is currently active, white means it is inactive
and blue means it is currently being edited. SIMs that are currently active appear in the Active Position list. SIMs
that are not active but have been reserved to timezones appear in the Limit 1 Reserved Positions and/or Limit
2 Reserved Positions lists (for more on limits, see Chapter 8.6 ).
To set or copy different rates, you must first activate the New Protocol checkbox in the edit window. After activating the New Protocol checkbox, you must select Reinit or Set Maintenance Mode from the mobile gateway’s context menu to activate this feature. If you deactivate the checkbox, you must restart the mobile gateway.
With the corresponding iGATE license, 3G SIMs are supported for 2G controllers as of vGATE SIM Unit Version 36 and iGATE Version 14.3.
For an overview of SIMs that were once, but are no longer, inserted in the vGATE SIM Unit, select Show SIMs not in Simserver from the View menu.
Figure 8.11 Edit Different Rates
ii
ii
ii
38
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 5 . 1 R E S E R V I N G S I M S T O I N A C T I V E T I M E Z O N E S
For our example, we will reserve SIMs 1.001.01-1.001.04 with Max Limit 1 to controller 0 on the Berlin iGATE
in the Germany group:
1. We click Germany in the groups window.
2. Then we click Berlin in the list of iGATEs.
3. Next, we click the white space between the markers set at 8:00 and 18:00. Now the space is blue and
SIMs can be reserved for this timezone.
4. We select the controller to which we would like to assign SIMs, in this case controller 0.
5. We mark the SIMs to be reserved to controller 0, in this case SIMs 1.001.01-1.001.04.
6. We right-click the SIMs we have marked and select Add to Selected Ctrls or we can simply drag the
SIMs to the corresponding controller while holding down the left mouse button.
7. A pop-up dialog appears, from which we select Limit 1 and click OK.
8. SIMs 1.001.01-1.001.04 appear in the Limit 1 Reserved Positions column (for a description of limits,
see Chapter 8.6 ).
The SIMs appear in the Limit 1 Reserved Positions list. When this timezone becomes active, the SIMs will be
assigned automatically to the Active Position and the lamp icon will be yellow.
Figure 8.12 Assigning SIMs to Selected Controllers
39
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Now we want to assign SIMs 1.001.06-1.001.10 with Max Limit 2 to consecutive controllers 1 to 5:
1. We follow steps 1 through 3 above.
2. We mark controller 1.
3. We mark SIMs 1.001.06-1.001.10.
4. We select Add Balanced to Ctrls.
5. A pop-up dialog appears, from which we select Limit 2 and click OK.
6. SIMs 1.001.06-1.001.10 appear in the Limit 2 Reserved Positions column.
7. SIMs 1.001.06-1.001.10 are now reserved to controllers 1-5 for this timezone (for a description of limits,
see Chapter 8.6 ).
The SIMs appear in the Limit 2 Reserved Positions list. When this timezone becomes active, the SIMs will be
assigned automatically to the Active Position and the lamp icon will be yellow.
The same steps can be followed to assign SIMs to an active timezone.
8 . 5 . 2 A S S I G N I N G S I M S T O A C T I V E T I M E Z O N E S
To assign SIMs to a timezone that is currently active, follow the same steps outlined above, but make sure all in-
active timezones are white in the timezone slide control by clicking the green timezone.
The SIMs will appear in the Active Position and Limit 1 Reserved Positions or Limit 2 Reserved Positions
column.
8 . 5 . 3 C O P Y I N G S I M A S S I G N M E N T
You can also copy the contents of one timezone into another for one or all mobile gateways in the group by left-
clicking the timezone to be copied and dragging the curser into another timezone. You cannot copy into the tim-
ezone that is currently active. However, it is possible to copy the currently-active timezone into another one.
40
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 6 S E T T I N G T I M E L I M I T S A N D P A U S E S
You can limit the number of time units a SIM is used before the mobile gateway switches to the next SIM or before
a SIM is permanently deactivated. The mobile gateway’s default configuration sets these time units at 10 seconds
each.
Right-click the SIM(s) for which you would like to set or change a limit and select Change Limits from the context
menu. Use the pop-up dialog to check No Limit if you prefer not to set a limit (default setting).
If the SIM is prepaid, check Prepaid SIM. Since the SIM’s limit is predefined, you must not set a limit for prepaid
SIMs. However, if you would like to set a change limit for prepaid SIMs, go to the vGATECtrl application and select
Use Change Limit for Prepaid SIMs from the Options menu. For a detailed description of this feature, see
Chapter 8.9.3 . If you check Auto Recharge, the SIM will recharge automatically (see Chapter 8.9 ). To limit
the number of times a SIM can be recharged per month, enter a value in the Max. Upgrades per Month box.
The SIM will no longer be assigned when the value entered is reached and the line will turn yellow. Unsuccessful
recharge attempts will also be counted toward the value entered. The counter is reset at the beginning of each
new month. To limit the number of times a SIM can be recharged per week, enter a value in the Max. Upgrades
Figure 8.13 Settings Time Limits and Pauses
41
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
per Week box. The SIM will no longer be assigned when the value entered is reached and the line will turn yellow.
Unsuccessful recharge attempts will also be counted toward the value entered. The counter is reset at midnight on
Sunday of each new week. If you do not want to limit the number of recharges, click No Limit (default).
To change the SIM after a certain amount of 10-second units, deactivate the No Limit checkbox. To set a random
limit, set two values Between 1 and 65534 in the Change Limit box. The first value must be less than the second
value. If the first value is greater than the second, a fixed limit will be set at the first value. For example, the
Change SIM Limit entry in Figure 8.13 is set to a random value between 1800 and 2600 10-second time units
(default setting for ChargeUnitGenerate), or 18,000 and 26,000 seconds. Random limits will change with
every SIM release.
Do the same under Max. Limit 1 and Max. Limit 2 to permanently deactivate a SIM after a certain number of
10-second units has passed. For example, the Max. Limit 1 entry in Figure 8.13 is 65,000 10-second time units,
or 650,000 seconds. If No Limit has been checked under Change Limit, you can enter a value here between 1
and 65534. Otherwise, you can enter a value between 1 and 2147483646. Bear in mind that balance verification
and expected amount settings will apply only for Max. Limit 1.
You can set a second max. limit under Max. Limit 2. When assigning the SIM to timezones, choose one of these
two limits for each timezone (see Chapter 8.5 ). Bear in mind that balance verification and expected amount
settings will apply only for Max. Limit 1.
To set a maximum call duration, activate the Max Call Duration checkbox and enter a range of seconds between
1 and 65533. After a random limit within the range has passed, the call will automatically be disconnected.
You can also set additional Adv. Limits. Use the Carrier List (see Chapter 8.8 ) to configure the limits and set
the limits here. Bear in mind that balance verification and expected amount settings will apply only for Max. Limit
1.
If a SIM switches to a new timezone where it has a different limit (Limit 1 to Limit 2), the SIM will be released unless
it is reserved to the same controller in the new timezone. If you want to release the SIM regardless of where it is
reserved, activate Release All SIMs if Timezone Changes in the vGATECtrl Options menu. If a SIM switches
limits during a call, the time will be deducted from the limit that was active when the SIM was assigned.
To Reset Limits once a month, check Day of Month and enter a date. The limit will reset automatically to the
original amount at midnight on the date entered. A similar limit is available for prepaid limits. In the Change Lim-
its to 0 group box, set a day of the month or a day of the week to change the limit to 0 and force a balance check.
If a day is set and the prepaid SIM card is blocked, it is automatically reset to 0 and thereby unblocked.
To reset the limit once a week, check Day of Week and the reset day. The limit will reset automatically to its orig-
inal amount at midnight on the day checked.
If you check Only if Limit Reached, the maximum limit will reset to its original amount on the day entered only
if the limit has been reached.
If you activate the checkbox Maximum Call Duration per Day, the SIM will be blocked as soon as the number
of minutes has been reached that is entered in Maximum Daily Call Duration regardless of any other limits that
have been set. Activate Use Daymask and click the Daymask button to set different maximum durations for dif-
ferent days. Minimum Remaining refers to a number of minutes that are left in the maximum daily duration. The
SIM will be blocked for the rest of the day at the end of any call that crosses this threshhold without reaching the
maximum daily duration. The maximum daily duration counter is reset every day at midnight. You must set a Tim-
ezone change at 11:50 p.m. Bear in mind that a time offset may be necessary.
42
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
You can set an interval for a SIM’s Maximum Calls Per Day by activating the corresponding checkbox and en-
tering two values. Every day a random value between the two values entered will be apply for the SIM. You must
set a Timezone change at 11:50 p.m. Bear in mind that a time offset may be necessary.
You can set a Time Offset to reset limits. The limits will be reset up to 14 hours ahead or 12 hours behind the
time on the vGATE Control Unit. This is useful for mobile gateways located in different time zones.
To set an amount of time a SIM is to remain idle between uses, enter a value in Minimum Pause after Last Use.
To set a random pause, set two values Between 0 and 99.99. The first value must be less than the second value.
If the first value is greater than the second, a fixed pause will be set at the first value. Be sure to use a period and
NOT a comma when setting unrounded values. If you activate the checkbox Ignore On Same Gateway, the min-
imum pause will be ignored if the SIM is reassigned to the same gateway. If you activate the checkbox Ignore if
Minimum Remaining Available, the minimum pause will be ignored if the Maximum Call Duration per Day
option is active. You can shorten the pause set here by configuring a distance between gateways (see Chapter ).
When the checkbox Maximum Usage per TZ is activated, the SIM will be blocked after it has been assigned the
number of times entered within the same Timezone. You can define this value for Limit 1 and Limit 2. A brown
icon will then appear. When the Timezone changes, the counter will be reset and the SIM can be assigned again.
When Active Release is checked and the Active SIM Release option has been set in the vGATECtrl, the active
SIMs will be released when the number of Minutes after Assign, Calls after Assign, SMS after Assign en-
tered has passed or the number of Incoming Calls or Call Attempts has been reached. Values between 2 and
9999 minutes or an unlimited number of calls or SMS are possible. SIMs in the reserved position will become active.
If no SIMs are reserved, the same SIM will be reassigned <Xref>(see Chapter 9.4 on page 113). Check Random
and the SIM will be released following a random number of minutes between the figures entered. Check Block if
Reached and the SIM will be blocked when the limit is reached. If you check Don't Release, Generate Incom-
ing Call, a call from a random SIM of the same carrier in the vGATE will be sent to the SIM that reached the call
limitation. If Maximum Calls Per Day is active, the remaining value there will apply if it is less than the value
entered here.
To delay SIM assignment, activate Delay SIM Assignment On TZ Change, Reset Maintenance, Boot Indi-
cation and enter two figures: the first between 0 and 600, and the second between 0 and 1200. The SIM will be
assigned a random number of seconds between those entered following a Timezone change, a maintenance mode
reset or a boot indication received from the mobile gateway.
Activate the checkbox Block SIM On Low ACD to block SIMs with short calls. Enter the number of times the ACD
can fall below the seconds set before it is to be blocked. Choose whether the values entered are to be calculated
within a 24 hour period (In 24 Hours) or consecutively (In a Row) before it is to be blocked. The ACD is checked
every time a SIM is released.
Make sure to reset limits only when SIMs are inactive. If you reset them while they are active, the settings in the database will no longer correspond with those in the mobile gateway.
You must first activate the New Protocol checkbox in the edit window to release calls or SMS after assigning them. After activating the New Protocol checkbox, you must select Set Maintenance Mode from the mobile gateway’s context menu to activate this feature. If you deactivate the checkbox, you must restart the mobile gateway.
ii
ii
43
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
If you activate Lower Priority and enter a figure On Limit Below, the SIMwill automatically receive lower priority
when its limit falls below the amount entered. Activate Reset Priority If Limit is Upgraded and the SIM will
receive its configured priority when the limit goes above the amount entered.
Activate Use SIM On Alternating Gateways to alternate the gateways on which the SIM will be used. Activate
Use SIM On Alternating Locations to alternate the locations on which the SIM will be used.If you activate the
checkbox Use SIM Only Once per Day and Gateway, the SIM will be used only once for each gateway to which
it is assigned on any given day. When the checkbox Release SIM Immediately after Timezone Change is
active, the SIM will be released when the Timezone changes and any calls will be disconnected. If Release All
SIMs if Timezone Changes has not been set in the vGATECtrl Options menu and the SIM is reserved for the
next Timezone at the same controller, it will not be released when the Timezone changes (see Chapter 9.4). If
LimitWODISC=ON has been set in the mobile gateway’s pabx.cfg, the call will continue into the next Time-
zone if the limit is reached before the end of the current Timezone.
8 . 7 S E T T I N G D Y N A M I C S I M P A U S E S
To shorten the pause set in the Limits dialog, you can configure a pause based on the distance between two mo-
bile gateways within a group. The vGATE calculates the pause based on coordinates that you enter for each mobile
gateway. If no other SIMs are available, these shorter pauses will override the static pause set for the SIM.
8 . 7 . 1 S E T T I N G T H E C O O R D I N A T E S
Figure 8.14 iGATE Coordinates
44
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
To calculate the coordinates for the mobile gateways in a group, place them on a Cartesian grid as shown in
Figure 8.14 , where 0 is the center of the group and the increments on the X and Y axes are units of distance.
You can define the units of distance and the increments freely as you choose.
8 . 7 . 2 E N T E R I N G T H E C O O R D I N A T E S
To set the coordinates you have calculated on your grid, open the edit
window by double-clicking the name of the mobile gateway. Enter the
mobile gateway’s Position as shown in Figure 8.15 .
8 . 7 . 3 S E T T I N G T H E T I M E / D I S T A N C E R A T I O
Once you have set the coordinates for your mobile gateways, you
can define the amount of time it takes to travel between two mo-
bile gateways in a group.
Double-click the name of the group to open the group editor. Ac-
tivate the Dynamic SIM Pause checkbox and enter a Minimum
Pause in minutes that is to be applied to all SIMs for the group,
regardless of the pause calculated for the distance between any
two mobile gateways.
In the Minutes Per Distance Unit box, enter the average
amount of time it takes to travel one increment of distance on
your grid. In Figure 8.16 , each unit of distance is equal to
three minutes.
For times when travel occurs faster or slower, you can set two
Pause Deviances. The example in Figure 8.16 reflects slower travel between 7:00 a.m. and 7:00 p.m., and
faster travel between midnight and 6:00 a.m.
Click OK. The vGATE will calculate the dynamic pause between mobile gateways automatically.
8 . 8 S E T T I N G C A R R I E R S
To set carriers, select Carrier List from the View menu or click the
icon in the toolbar.
Figure 8.15 iGATE Position
Figure 8.16 Dynamic SIM Pauses
45
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
The Carrier List window will appear. Right-click an empty line or an entry and select Edit, Add or Delete from the
context menu.
If you select Edit or Add, the carrier list editor will appear. From here you can define new carriers or edit existing
ones. The information entered here will also be sent to the mobile gateway for automatic configuration of SIMs
and SMS service if New Protocol is activated in the edit window of the mobile gateway:
Figure 8.17 Carrier List
Figure 8.18 Carrier ID Editor
46
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Table 8.1 Carrier ID Editor
Entry Description
Name Enter the carrier’s name.
Prefix Enter all of the carrier’s prefixes that are to be sent to the mobile gateway
when Limit Outgoing Calls to Prefix is active. Separate multiple prefixes
with a semi-colon.
Limit Outgoing Calls to Prefix Activate this checkbox to route only those calls beginning with the Prefix
entered.
LAIN Enter the carrier’s LAIN.
Carrier Sub ID You can assign a sub ID (default 1) for individual SIMs (for example, if a car-
rier uses different recharge numbers for its SIMs).
Mapping Character Enter the mapping character you configured for the carrier in the
route.cfg.
Prepaid Recharge: DTMF Check here if the carrier uses DTMF to recharge SIM cards.
Prepaid Recharge: SMS Check here if the carrier uses SMS messages to recharge SIMs.
Recharge by SMS requires the following mapping entry in the mobile gate-
way’s route.cfg:
MapAllSMS??=<LAIN>*??01: DATA
Example:
;Recharge via SMS;---------------------------------------------------MapAllSMS??=11111*??01: DATAMapAllSMS??=22222*??01: DATAMapAllSMS??=33333*??01: DATAMapAllSMS??=44444*??01: DATA
NOTE: Recharge by SMS requires mobile gateway version 14.3 or higher.
47
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Prepaid Recharge: USSD Code Check the box and enter the USSD code used to recharge SIM cards.
The entry must contain the code that you need to access the USSD menu,
the pauses that you need to wait and the menu entries that you need to se-
lect.
Example: In the following example, the USSD code *100# is enteredfollowed by a 5 second pause, the menu entry 1, and a 10second pause:
*100#p5m1p10
If your entry plus voucher code, additional pauses, and menu entries exceed
22 characters, enter a placeholder instead. In this case, you need to config-
ure the pabx.cfg and route.cfg. For a detailed description please see
Chapter 8.9.5 on page 58 .
NOTE: Balance check by USSD code requires mobile gateway ver-sion 14.3 or higher.
Prepaid Balance Check: USSD
Code
Check the box and enter the USSD code for retrieving the SIM card’s balance.
To get the available balance via USSD menu, enter the USSD code followed
by the pauses and menu entries that you need to access the balance check
option.
Example: In the following example, the USSD code *100# is enteredfollowed by a 5 second pause and the menu entry 1:
*100#p5m1
NOTE: Balance check by USSD code requires mobile gateway ver-sion 14.3 or higher.
Prepaid Balance Check: SMS To Check this box if the carrier uses SMS for balance check and enter the des-
tination number into the field to the right of the check box. In addition, you
need to enter the SMS text into the Message field.
Prepaid Balance Check: Message To receive the balance by SMS message, enter the SMS text into this field.
Balance check by SMS requires the following mapping entry in the mobile
gateway’s route.cfg:
MapAllSMS??=<LAIN>*??01: DATA
Example:
;Balance Check via SMS;---------------------------------------------------MapAllSMS??=11111*??01: DATAMapAllSMS??=22222*??01: DATAMapAllSMS??=33333*??01: DATAMapAllSMS??=44444*??01: DATA
NOTE: Balance check by SMS requires mobile gateway version 14.3 or higher.
Service Center Number Enter the carrier’s service center number.
Table 8.1 Carrier ID Editor (continued)
Entry Description
48
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
SMSC Number Enter the carrier’s SMS service number.
Balance Parse String Enter a search string for the prepaid SIM’s balance. As of version 14.6 of all
mobile gateways, you can set two strings by entering an & sign between
them. The two resulting values will be added together and calculated with
the balance factor (BF) to form the prepaid limit. If no second value exists,
only the first will be calcultated. If no first value exists, there will be no result.
Enter a pipe (|) to search for either value. You can enter a < sign in front of
each search string to parse the balance before the search string. You can
also parse any limits you have set by including them in curly brackets in front
of the parse string as follows:
{0}<string>=Major limit
{1}<string>=Advanced limit A
{2}<string>=Advanced limit B
{3}<string>=Advanced limit C
You can also parse remaining times as follows:
{A}<string>=Time in minutes
{B}<string>=Time in seconds or hour:minute:second
EXAMPLE: {0}balance & {1}bonus.
NOTE: Bear in mind that limits and times cannot be combined in the same string.
Use ’.’ As Decimal Separator Activate this checkbox when a carrier uses periods as decimal separator.
Leave it empty if the carrier uses a comma.
Currency Unit/Minute Enter the cost of a call per minute.
BF This value is calculated automatically. As of version 14.6 of all mobile gate-
ways, up to two decimal places will be calculated.
Remaining Balance Enter the minimum balance at which the card will be recharged or blocked.
Charge Unit First Enter the initial time unit charged after call connection (usually in seconds).
Charge Unit Generate Enter the charge unit generated for the call (usually in seconds). Set 0 as a
flat rate if you do not want to generate charge units.
Worst Case Charge Enter the highest possible fee a carrier may charge.
Table 8.1 Carrier ID Editor (continued)
Entry Description
49
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Advanced Limit Charges This button is green when limits have been set and gray when nothing has
been entered. Click this button to open the Advanced Limit Charges win-
dow. You must enter all prefixes for which the limit is to apply. These limits
will not apply if no prefixes are entered. Enter the charge information. Click
the Daymask button to set the times for which the limit is to apply. For post-
paid SIMs, limits will all apply simultaneously unless you activate Use Limits
One By One and the limits. For prepaid cards, the limits will all apply one
after the other. Bear in mind that balance verification and expected amount
settings will apply only for Max. Limit 1.
NOTE: You must define a mapping character for each prefix in the route.cfg.
Special Parse Actions Click here to enter a string from an information message that the carrier may
send to the SIM and the path to a special script that will run when this string
is received. This button is green when a string has been set and gray when
nothing has been entered.
Info Parse String Click here to enter a string from an information message that the carrier may
send to the SIM. The string will be entered in the Info 1, Info 2 or Error col-
umn if it is received from the SIM’s carrier. The icon will appear in front
of the SIM’s IMSI. If Release SIM on Info is active, The SIM will be released
after receiving the info parse string. If Block is also active, the SIM will be
released and blocked. This button is green when a string has been set and
gray when nothing has been entered.
Loudness PCM Set the PCM volume level between 0 (lowest volume) and 7 (highest vol-
ume). The default setting is 4.
Loudness Mobile Set the mobile volume level between 0 (highest volume) and 3 (lowest vol-
ume). The default setting is 1.
Echo Cancelation Check this box to activate echo cancelation.
Recharge Time Frame Activate this checkbox and set a timeframe during whcih a SIM is to re-
charge.
Master Carrier for Balance Trans-
fer
This checkbox is needed for prepaid SIM cards in a balance transfer scenario.
Check this box to define a carrier as master and select a balance transfer
script into the Transfer Script box. For more details on balance transfer
please see Chapter 8.9.6 .
Recharge Via Balance Transfer This checkbox is needed for prepaid SIM cards in a balance transfer scenario.
Check this box to define a carrier as production carrier and select a master
carrier from the drop-down menu. For more details on balance transfer
please see Chapter 8.9.6 .
Table 8.1 Carrier ID Editor (continued)
Entry Description
50
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Recharge Via Special Action Check this box and select a script to recharge SIM cards using special service
scripting commands. You can use this feature to enforce a balance check be-
fore recharging SIM cards or to do any other verifications in your recharging
process. Use the following special service scripting commands:
RECHARGE_IF_LIMIT_BELOW_WORELRECHARGE_IF_LIMIT_BELOWSET_MAX_LIMITCHANGE_MAX_LIMITFor an explanation of these scripting commands, please refer to
Chapter 8.12.1
Use External Web Recharge API This feature is planned for a future version.
No PP Balance Check if Limit
Available
When this checkbox is active, no balance check occurs after prepaid SIM
cards with Max Limit 1 are assigned.
No Cyclic PP Balance Check Activate this checkbox to switch off the automatic balance check that nor-
mally takes place at 12:00 AM and 12:00 PM on the mobile gateway.
No PP Balance Check After Re-
charge
When this checkbox is active, no balance check of the prepaid SIM cards oc-
curs after the SIM has been recharged. A balance check will occur the next
time the SIM is assigned.
PP Passive Balance Check When this checkbox is active, automatic balance checks that come via SMS
are entered in the database. This is useful for SIMs that do not allow active
balance checks.
Don’t Release After Recharge Activate this checkbox to ensure that a SIM card is not deactivated after re-
charge.
Reset Too Many Announcements
If Actual Minutes Below Worst
Case
Activate this checkbox to reset the counter for too many announcements to
reflect the worst case configuration.
Table 8.1 Carrier ID Editor (continued)
Entry Description
51
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Too Many Announcements
Check
The mobile port is blocked when the value defined for calls that result in re-
corded messages is reached. When this feature is activated, the vGATE will
automatically assign the SIM again and a balance check will occur. Activate
Reassign and Test With One Call Attempt to allow just one call over
this SIM. After this call the SIM will be released again. If the call is success-
fully connected, the error will be removed and the SIM will be used in normal
service again. If the call is not connected or the setup results in another re-
corded message, the SIM will be blocked.
If you activate Verify Balance, a balance check will occur. Specify how of-
ten by entering the number of balance checks in the Times Per Day and
Times Per Month boxes. If the SIM card has a positive balance that is with-
in the value entered in Balance Verification Tolerance, the error will be
removed and the SIM will be used in normal service again. If the error occurs
again, the vGATE will allow just one call over this SIM. After this call the SIM
will be released again. If the call is successfully connected, the error will be
removed and the SIM will be used in normal service again. If the call is not
connected or the setup results in another recorded message, the SIM will be
blocked. If the SIM does not have a balance that is within the Balance Ver-
ification Tolerance, the SIM will be released and blocked with a balance
verification error.
Bear in mind that the value defined for Too many announcements in the-
edit window of the mobile gateway must be set at 1 or higher.
The parameter STOP[<val1>,<val2>] must be set on the mobile gateway for
this feature to work (please refer to your iGATE, ECOTEL GSM, or ECOTEL 3G
manuals for an explanation of this parameter).
Random Balance Verification To ensure that the vGATE calculation of limits is correct and the carrier’s rates
have not changed since the last time the SIM was recharged, two additional
random balance checks can be started.
After the Random Balance Verification has occurred, a new limit is cal-
culated for the SIM. If this limit differs from the limit that the vGATE calcu-
lated before the balance check, and the difference is smaller than the
Tolerance, the SIM will be released and blocked, and an error message will
be generated. Random Balance Verification works only for prepaid SIM
cards with an automatic recharge configuration.
Activate Dai Based to initiate a random balance check within the timeframe
entered.
Balance Verification Tolerance This feature is for autorecharge prepaid SIMs. You can enter a percentage, a
number of units, or both if both are to apply. Please see the descriptions in
the entries for Too many announcements check and Random Balance
Verification above.
Table 8.1 Carrier ID Editor (continued)
Entry Description
52
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 9 C O N F I G U R I N G P R E P A I D S I M S
To set prepaid SIMs, you must activate New Protocol in the edit window of the mobile gateway.
Remote tuneling is required for automatic recharge when a remote connection to the mobile gateway exists. Only
one SIM can be recharged on a mobile gateway at any one time. Up to two SIMs can be recharged simultaneously
if they are assigned two different mobile gateways.
8 . 9 . 1 C O N F I G U R A T I O N I N T H E M O B I L E G A T E W A Y
To define prepaid SIMs, you must make the following settings on the mobile gateway.
8 . 9 . 1 . 1 S E T T I N G S I N T H E R O U T E . C F G
The following entries must appear in the route.cfg to save the necessary USSD or SMS messages into a file.
For USSD messages:
Restrict<LAIN>=@FILE 06
For SMS messages:
Restrict<LAIN>=@FILE 05
To automatically recharge prepaid SIMs, the following entries must be made in the mobile gateway’s
route.cfg:
A mapping character must also be defined for each carrier as follows:
MapAll<mapping character>??=<LAIN>*??01:
Reset Too Many Announcements
After Positive Balance Verifica-
tion
Activate this checkbox to reset the counter for too many announcements fol-
lowing a balance check with a positive result.
Ignore If Balance Check Is Out Of
Service
Activate this checkbox to ignore unsuccessful balance checks.
Pause Before Release SIM Activate this checkbox and enter a range of minutes for a pause to occur be-
fore a SIM is released after its last call.
Pause Between Assign And First
Call
Activate this checkbox and enter a range of minutes for a pause to occur af-
ter a carrier’s SIMs have been assigned before the first call is sent.
Initial Limit of New SIMs Activate this checkbox and enter a limit value for the first time a new SIM
from this carrier is used. This is useful for prepaid SIMs that require a call to
retrieve balance information.
Table 8.1 Carrier ID Editor (continued)
Entry Description
53
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
MapAllDTMF=41DTMF
Example: In the following example, the carrier with the LAIN 11111 is assigned the mapping character Z,the carrier with the LAIN 22222 is assigned the mapping character Y, the carrier with the LAIN33333 is assigned the mapping character X, the carrier with the LAIN 44444 is assigned the map-ping character W.
8 . 9 . 1 . 2 S E T T I N G S I N T H E P A B X . C F G
Make the following settings in the mobile gateway’s pabx.cfg:
MsgLog=/data/msg.log <saved> <size> <number>
or if no compact flash is included in the system:
MsgLog=/boot/msg.log <saved> <size> <number>
8 . 9 . 2 D E F I N I N G P R E P A I D S I M S O N T H E v G A T E D e s k t o p
Once you have inserted a prepaid SIM into the vGATE, you must define it as prepaid in the vGATEDesktop in one
of the following ways:
Right-click the SIM and select Define as Prepaid SIM.
Right-click the SIM and select Change Limits. Activate the Prepaid SIM checkbox. If the SIM recharges
automatically, activate the Auto Recharge checkbox.
The following icons in the SIM window show that the SIM has been defined as prepaid:
To avoid mapping conflicts, we recommend that you use the last letters in the alpha-bet as mapping characters.
MapAllDTMF=41DTMFMapAllZ??=11111*??01:MapAllY??=22222*??01:MapAllX??=33333*??01:MapAllW??=44444*??01:
We strongly recommend using a compact flash, as the available storage space is lim-ited and may fill up quickly, causing the system to fail. The CDR license includes the compact flash.
ii
ii
54
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Table 8.2 Prepaid SIM Icons
To deactivate the SIM position’s prepaid status, right-click the SIM and select Change Limits. Deactivate the Pre-
paid SIM checkbox.
The SIM’s prepaid limit will always appear in the Max Limit 1 column.
8 . 9 . 2 . 1 F I N D I N G T H E B A L A N C E P A R S E S T R I N G
The balance parse string is the reference term used to access the carrier’s recorded message. On the
vGATEDesktop, set one of the carrier’s SIMs as prepaid and assign it to a controller that has been defined as pre-
paid for this carrier. After 2 minutes, establish a GATE Manager connection to the mobile gateway. Open the logfile
defined in the configuration. The text will appear here in front of the currency entry. Now you can enter the text in
the carrier configuration (cf. Chapter 8.8 on page 45 ).
Example: After you send the balance code, the following string appears:your available balance: 10.20€An appropriate balance parse string would be balance:
8 . 9 . 2 . 2 C A L C U L A T I N G T H E B A L A N C E F A C T O R
The balance factor is the number of time units in a currency unit (e.g.$, €, etc.). The rate is the cost per minute.
ChargeUnitGenerate is the number of seconds in a time unit.
The balance factor can be calculated automatically up to two decimal places from the vGATEDesktop
(cf. Chapter 8.9.4 on page 56 ).
8 . 9 . 3 S E T T I N G A C H A N G E L I M I T F O R P R E P A I D S I M S
To activate this feature, go to the vGATECtrl application and select Use Change Limit for Prepaid SIMs from
the Options menu. Setting a Change Limit for prepaid SIMs brings the following advantages:
A balance query will no longer occur every time the SIM is assigned.
Automatic balance queries from the mobile gateway will no longer occur at noon and midnight mobile
gateway time.
SIMs can be switched when the Change Limit is reached and do not have to be active until the prepaid
limit (Max Limit 1) is reached.
A Change Limit on prepaid SIMs works like this:
Icon Description
The SIM in this position is prepaid.
The prepaid SIM in this position recharges automatically.
55
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Define the SIM as a prepaid SIM and set the change limit. After you assign the SIM, the prepaid limit is queried.
As soon as the prepaid limit arrives at the vGATE, it is set in the database as Max Limit 1 and the change limit is
activated in the mobile gateway. That means the SIMs prepaid status is no longer transmitted as such to the mobile
gateway. The mobile gateway will recognize the Change Limit as long as Max Limit 1 (prepaid limit) is less than
the Change Limit. When the Change Limit reaches Max Limit 1, a balance query will occur.
8 . 9 . 4 E N T E R I N G A U T O R E C H A R G E V O U C H E R S
Once you have set up the Carrier List (cf. Chapter 8.8 on page 45 ), you can set the automatic recharge. Select
Prepaid Recharge List from the View menu or click the icon in the toolbar. The prepaid recharge list
will appear. If you select Edit or Add, the prepaid recharge list editor will appear. From here you can define re-
charge numbers or edit existing ones.
In the dialog that appears, use the drop-down menu to select the SIM’s
Carrier.
Enter the Recharge String as follows: If you are using USSD, simply
enter the digits in the code.
If the carrier recharges SIMs using DTMF tones, you must first enter
DTMF: followed by the string. The carrier’s service center recording
will include various menu options and queries, which generally require
that you configure pauses into the recharge string. Enter a p for a 1-
second pause and a P for a 10-second pause. You may have to call the
This feature is available only as of version 14.6 of all mobile gateways.
ii
Figure 8.19 Prepaid Recharge List
Figure 8.20 Prepaid Recharge Editor
56
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
service center number and time the recording, so that you know how long the pauses are to be. If the recharge
process takes longer than 240 seconds, the call will be disconnected. A comment can be added about the specific
recharge code in the User Info dialog.
In Figure 8.20 , the Recharge String is DTMF:P1PPppp010943667175#PP. That means the carrier uses
DTMF tones to recharge SIMs. The string begins with a pause of 10 seconds followed by a 1. Then comes a pause
of 3 seconds followed by 010943667175#. A pause of 20 seconds occurs before the call is disconnected.
If you are recharching your SIM card by SMS, you must first enter SMS: followed by the voucher code provided by
your carrier.
Enter the total Expected Amount. The Primary Amount is the amount on the voucher and the Bonus Amount
refers to any additional amount that will be added. Bear in mind that the figure entered here multiplied by the
balance factor must be greater than the remaining balance set in the carrier editor.
You can enter any useful User Info in the corresponding dialog box. Make sure the Type is set at 0.
Use the context menu to perform the following additional functions:
Delete: Removes the entry from the list.
Reset: Resets the process to run again.
Select SIM: Marks the SIM in the vGATEDesktop’s SIM view if the recharge number has been used.
Export: Exports the list to a text file. Each file entry will look like this: <carrier id>, <rechargenumber>.
Import: Imports the list to a text file. Each file entry will look like this: <carrier id>, <rechargenumber>,,<expected amount (optional)>.
Example: 1,DTMF:Pppp2ppp012345678#ppp,,450
If an error occurs during recharge, the SIM card that is being recharged is blocked with the ”no recharge number found” error message. Once you enter a new voucher, the SIM card is automatically unblocked.
ii
57
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
The Prepaid Recharge List includes the following icons:
8 . 9 . 5 R E C H A R G E V I A U S S D M E N U
To recharge prepaid SIMs via the USSD menu, enter the USSD menu code in the USSD Recharge Code box in
the carrier editor. Due to protocol limitations, this string plus voucher code, additional pauses, and menu entries
must not exceed 22 digits. If it does, enter a placeholder instead. In this case you have to adjust the pabx.cfg and
route.cfg files, as described in the sections that follow.
8 . 9 . 5 . 1 S E T T I N G S I N T H E P A B X . C F G F I L E
The following new entry must appear in the [system] section of the pabx.cfg file.
GSM<number>=<LAIN> MAP[<mapping character>??<placeholder>~><mapping charac-ter>??<USSD menu>~<pause in seconds><USSD menu entry>]
You can create up to four different GSM<number> entries. The number parameter denotes the different entries.
Enter the MCC/MNC combination (the LAIN parameter) to uniquely identify the carrier. The mapping char-acter is used to group carrier SIMs with the same settings. It is taken from the Mapping Character box in the
vGATE’s carrier editor. The ?? are used to dynamically locate the port. The placeholder parameter comes from
the USSD Recharge Code box in the vGATE’S carrier editor. The ~ is replaced with the voucher code sent from
the vGATE. The > separates the left from the right side. The USSD menu parameter contains the command that
you need to access the carrier’s USSD menu. Both the pause in seconds and the USSD menu entryparameters are used to navigate through the USSD menu. They need to be entered as often as it takes to get to
the right menu for recharge.
Table 8.3 Prepaid Recharge List Icons
Icon Description
The code has not yet been used and is still available.
The number has been used and is no longer available.
An error occurred in the recharge process.
The number was used with no result.
The number is currently being used to recharge a SIM.
58
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Example: In the following example, a SIM card is recharged using the USSD menu. The MCC/MNC combi-nation to uniquely identify the mobile operator is 26212. In the vGATE’s carrier editor, the map-ping character to identify all of the mobile operator’s SIM cards which are recharged via USSDmenu is V, the place holder for the USSD menu entry is B. In the pabx.cfg, B is replaced by*100#~p5m1p10m2 which is the USSD menu entry *100#, the voucher code coming from the
vGATE, a 5 second pause to enter menu 1, and a 10 second pause to enter menu 2.
8 . 9 . 5 . 2 S E T T I N G S I N T H E R O U T E . C F G F I L E
Change the MapAll entry in the route.cfg to include the settings for USSD menu recharge. Search for the
matching MapAll command and extend it as follows:
MapAll<mapping character>??<place holder>=<LAIN>*??01:<USSD menu>
Example: Complete the above example with the matching route.cfg entry.
For an explanation of how to define prepaid SIMs in the route.cfg, please refer to Chapter 8.9.1 on
page 53 .
8 . 9 . 6 S I M C A R D B A L A N C E T R A N S F E R
This feature is used to transfer a balance from one or more master SIM cards to different production SIM cards.
When a production SIM card needs to be recharged, the vGATE control unit chooses a master SIM card from the
defined master carrier and starts a transfer script to transfer the balance from the master SIM card to the production
SIM card. After a successful balance transfer, the production SIM card is informed about the new balance via the
passive balance check functionality.
GSM1=26212 MAP[V??B~>V??*100#~p5m1p10m2]
MapAllV??B=26212*??01:*100#
Figure 8.21 Recharge via USSD Menu
59
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 9 . 6 . 1 C O N F I G U R I N G M A S T E R C A R R I E R A N D M A S T E R S I M C A R D S
From the carrier list, select the carrier that you want to define as master carrier. Right-click the carrier and select
Edit. In the edit window, activate the Master Carrier for Balance Transfer checkbox and enter a transfer
script.
Make sure that SIM cards from this master carrier will not be used for production purposes by entering a prefix in
the Prefix field that is not used for a real carrier and by checking Limit Outgoing Calls to Prefix.
To connect a master SIM card with the master carrier, right-click the SIM card and select Change SIM Options...
from the shortcut menu. Select the master carrier’s carrier name and sub ID from the Carrier Name (Sub ID)
drop-down menu.
8 . 9 . 6 . 2 C O N F I G U R I N G P R O D U C T I O N C A R R I E R A N D P R O D U C T I O N S I M C A R D S
In the production carrier’s edit window, check Recharge Via Balance Transfer and select the name of the mas-
ter carrier from the drop-down menu.
Figure 8.22 Master Carrier: Transfer Script Settings
Figure 8.23 Master Carrier: Prefix Settings
Figure 8.24 Master SIM Card: Selection of Master Carrier
Figure 8.25 Production Carrier:Selection of Master Carrier for Balance Transfer
60
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
If the new balance is automatically communicated by the carrier, check the PP Passsive Balance Check box from
the production carrier’s edit window to ensure that the vGATE knows about the new balance.
Production SIM cards must have their own number entered in the SIM Options window, which you open by right-
clicking a production SIM card and selecting Change SIM Options... .
In the same window, ensure that the production SIM card is linked to the production carrier by selecting this carrier
from the Carrier Name (Sub ID) drop-down menu.
Figure 8.26 Production Carrier:Prepaid Passive Balance Check
Figure 8.27 Production SIM Card: Own Number
Figure 8.28 Production SIM Card: Selec-tion of Production Carrier
61
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 9 . 6 . 3 TR A N S F E R S C R I P T E X A M P L E
The following transfer script example sends a USSD message including the number of the production SIM card to
the carrier of the master SIM card. It parses and handles the USSD answer including the strings below:
successful: unblock the port of the master SIM card and end the script.
successfully: unblock the port of the master SIM card and end the script.
unsuccessful: write an error string and an error value (10) to the database entry of the production
SIM, release the production SIM (which will be blocked because of the error value) and end the job.
_TIMEOUT_: On job timeout, write an error string and an error value (11) to the database entry of the
production SIM, release the production SIM (which will be blocked because of the error value) and end the
job.
8 . 1 0 A U T O M A T I C M O B I L E G A T E W A Y C O N F I G U R A T I O N V I A v G A T E D e s k t o p
This option applies only for mobile gateways versions 15.0 and higher. All previous versions require configuration
in the mobile gateway’s pabx.cfg for each carrier (see Chapter 8.9.1.2 ).
SEND_USSD_WAIT(*444*1*<RECEIVE_NUMBER>*150*0716#,successful,sucessfully,unsuccessful, _TIMEOUT_,2) {
UNBLOCK_PORTEND_JOB
}{
UNBLOCK_PORTEND_JOB
}{
CHANGE_RECEIVER_DB_STRING(sError, balance transfer unsuccessful)CHANGE_RECEIVER_DB_INT(iError, 10)RELEASE_RECEIVER_SIMEND_JOB
}{
CHANGE_RECEIVER_DB_STRING(sError, balance transfer timeout)CHANGE_RECEIVER_DB_INT(iError, 11)RELEASE_RECEIVER_SIMEND_JOB
}
62
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Double-click the name of the mobile
gateway or select Edit from the
context menu to open the edit win-
dow. When you activate the New
Protocol checkbox, the following
information is sent to the mobile
gateway:
SMS center number
USSD balance code
Balance parse string
Balance factor
Remaining balance
Route priority
Charge unit first
Charge unit generate
Loudness PCM
Loudness mobile
Calls after assign
SMS after assign
Maximum call duration per day
Maximum balance checks after assign
No cyclic prepaid balance check
Too many announcements check
Suppress quality indications
Maximum calls per day
Pause between assign and first call
Carrier sub ID
Use of decimal point as separator
Incoming calls
Echo cancelation
Prepaid passive balance check
Automatic transmission of SIMs’ own number
Pause between assign and first call
Adv. limit charges (prefixes, charge unit first, charge unit generate)
Advanced limits
Call attempts
After activating the New Protocol checkbox, you must select Set Maintenance Mode from the mobile gateway’s context menu to activate this feature. If you deactivate the checkbox, you must restart the mobile gateway.
Figure 8.29 Setting New Protocol
ii
63
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 1 1 S M S A N D C A L L O P T I O N S
You can configure individual SIMs to transmit and receive calls and SMS, so that traffic flows in both directions.
Each SIM can send and/or receive up to 99 SMS and 99 calls per day or month or receiver group.
8 . 1 1 . 1 S E N D I N G S M S A N D C A L L S
To define call and/or SMS sending, you must define a mapping
character for each carrier you use for SMS and/or call sending
(see Chapter 8.9.4 ).
To open the SIM Options dialog, select Change SIM Options
from the context menu in the SIMs view.
If you want to send calls and SMS daily, activate the appropriate
checkboxes. Otherwise they will be sent monthly. You can send
one call and/or SMS immediately for test purposes by checking
the corresponding boxes. Activate Check Only Successful
Calls if you do not want unsuccessful connections to be applied
to your settings.
Enter the number of calls and/or SMS that are to be sent to the
Destination SIM Cards. Activate the appropriate check-
box(es) to send all calls and SMS to mobile gateways in the same
group or SIMs with the same color. If no calls or SMS are to be
sent from the selected SIM, enter 0.
You can also define up to three Receiver Groups to which the
number of calls and/or SMS entered are to be sent. For more in-
formation on defining receiver groups, please see
Chapter 8.11.2 . Enter a value for the Preferred Receive
Numbers Count to send most of the calls to a limited number
of receivers.
If the SIM is to receive calls and SMS originating from the vGATE,
enter the SIM’s call number in the Own Number box and acti-
vate the appropriate checkboxes. If you do not want the selected SIM to receive calls or SMS, leave this box blank.
To send calls and/or SMS, the following entries in the route.cfg are also required to define a mapping character
for each carrier that doesn’t already have one:
MapAll<mapping character>??=<LAIN>*??01:
Only active SIMs can send and/or receive calls and/or SMS. No calls or SMS can be sent when a remote connection to the mobile gateway exists. Remote tuneling is re-quired when a remote connection to the mobile gateway exists.
ii
Figure 8.30 SIM Options
64
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Example:
To send SMS, you must also enter SMS as follows:
MapAllSMS<mapping character>??=<LAIN>*??01: DATA
Example:
You must also set carriers on the vGATEDesktop as described under Chapter 8.8 . If you are not using a carrier’s
prepaid SIMs, fill in only the Name, LAIN and Character for Mapping spaces and leave the others blank.
8 . 1 1 . 2 R E C E I V I N G S M S A N D C A L L S
You can also create a list of numbers that are to receive SMS and/or calls and assign them to groups. Select SMS/
Call Receiver from the View menu or click the button in the toolbar. The Receiver Groups window ap-
pears. All is the default group that means all messages are initially placed in one group. To add a new group, right-
click in the window and select Add and enter a name for the new group in the dialog that appears. To rename a
group, select Edit; to delete, select Delete. To open the list, right-click a specific group and select Explore.... The
Receive Numbers list will appear.
Now you can select Add or Edit from the Receive Numbers context menu and fill in the SIMs Number. Use the
drop-down menu to select a group from which the SMS or call is to come, or select All if you prefer not to limit
calls and/or SMS to one group. The Receiver Group you have selected will appear next. Enter a number of Calls
per Month and/or SMS per Month that the SIM is to receive calls and/or SMS. Up to 9999 are possible. Calls
and SMS will be set randomly to numbers in this list and to SIMs defined to receive SMS and calls (see
Chapter 8.11.1 ). Generated calls last between 15 and 60 seconds (default).
To receive calls at defined mobile gateways, enter the following settings in the mobile gateway’s route.cfg:
MapAllZ??=26201*??01:MapAllY??=26202*??01:MapAllX??=26203*??01:MapAllW??=26207*??01:
MapAllSMSZ??=26201*??01: DATAMapAllSMSY??=26202*??01: DATAMapAllSMSX??=26203*??01: DATAMapAllSMSW??=26207*??01: DATA
Figure 8.31 Receive Numbers List
65
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Restrict<LAIN>=41DTMF_ 01
To receive SMS at defined mobile gateways, enter the following settings in the mobile gateway’s route.cfg:
Restrict<LAIN>=@FILE 05
8 . 1 1 . 3 D E F I N I N G S M S M E S S A G E S
To send an SMS, you must, of course, first define what the text contains. Each SMS can contain no more than 160
characters.
Select SMS Message List from the View menu or from the toolbar. The Receiver Groups window appears.
Double-click the receiver group whose SMS message list you want to open. A table containing all defined SMS mes-
sages appears. Right-click and select Edit to edit an existing message, Add to add a new message, Delete to
delete an existing message and Import from File to browse for a text file containing SMS. Each line in the text
file contains one SMS of up to 160 characters. The contents of the file will be imported to the SMS Messages
table. Each SMS Message can be moved to another receiver group. For more information on defining receiver
groups, please see Chapter 8.11.2 .
8 . 1 1 . 4 S E N D I N G E X T E R N A L S M S
To send targeted external SMS to specific defined numbers,
activate the Use group for sending external SMS check-
box in the group view editor and activate Send External
SMS in the vGATECtrl Options menu.
The default configuration saves SMS files in the folder
F:\vGATE\SMS. You can configure another path in the
registry under
\\HKEY_CURRENT_USER\Software\TELES\vGATECtrl\SMSPath.
The file extension must be .sms. The content of the files
must have the following syntax:
To:<num>Msg:<message>
The commands To: and Msg: must appear at the beginning of the line, but more than one message can be sent
to each recipient.
Example: In the following example, the message Test1 is sent to both recipients 017112345678 and017212345678. The messages Test2 and Test 3 are sent only to 017212345678.
Figure 8.32 SMS List
Figure 8.33 Sending External SMS
66
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
vGATECtrl checks the configured folder once per minute. If new .msg files are in the folder, the SMS will be sent.
Once they have been sent, they are automatically renamed with the extension .old and an entry appears in a
.log file that is saved into the same folder.
8 . 1 1 . 5 R E T R I E V I N G A S I M ’ S O W N N U M B E R
For SIM’s for which you have an IMSI but no telephone number, you can retrieve the number by following these
steps:
Create a special action script for sending an SMS with the IMSI to a SIM in the vGATE.
Example: In the following special script example, the SIM card’s IMSI is 123456. An SMS with the messageIMSI=123456 is sent to the SIM with the number +490179456456.
Open the SIM Options dialog for the SIM sending the message.
Activate the appropriate checkbox, and enter the path for the spe-
cial script as shown in Figure 8.34 . You can also start the script
manually by selecting Start Special Service from the context
menu in the Controller view.
Create another script to save the OAD for the SIM with the IMSI sent. The where part of the SQL query comes from
the parse result.
Example: In the following special script example, the telephone number for the SIM with the IMSI 123456is entered in the SIM’s OwnNumber column. The 1 is a flag to indicate that the contents of the
To:017112345678Msg:Test1To:017212345678Msg:Test1Msg:Test2Msg:Test3
This feature requires special service scripting. For more information on special ser-vices and script commands, please refer to Chapter 8.12 .
SEND_SMS(+490179456456, IMSI=123456)END_JOB
ii
Figure 8.34 Send Own IMSI
67
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
SMS received (IMSI=123456) is to be the where part of the SQL query.
To perform this function, vGATE must parse in-
coming SMS messages for the string IMSI=. To
set up the parse configuration, open the Carrier
List. Double-click or right-click the carrier’s name
to open the carrier editor. Click the Special
Parse Actions button to open the Parse String
Action dialog.
Under Parse String enter IMSI=. Under Action
enter the path for a special service script to save
the own number.
Click OK to start the special script.
8 . 1 2 S P E C I A L S E R V I C E S
The Special Service group box in the SIM Options dialog (se-
lect Change SIM Options from the context menu in the SIMs
view) allows you to define special services offered for a SIM, such
as special tariffs or discount offers. These services can then be
automatically activated with this function.
The commands for this function are defined by scripts that are
entered in defined .ini files.
These commands can be carried out automatically by activating
any or all of the following checkboxes:
After Assign will start the script whenever the SIM is
assigned. Activate Once per Day if this is to occur only
once on any given day.
Change Limit Reached will start the script whenever the
SIM’s change limit is reached. This option is also possible
with SIMs that are not prepaid.
Each Limit Ind. (PP) will start the script whenever the prepaid SIM’s limit is reached.
New SIM will run the script once every time a new SIM is entered.
Between will start the script daily or on defined days of the month at a random time between those
entered (be sure to enter times based on a 24-hour clock, e.g. 5:00 pm must be entered as 17). You must
enter times on the hour. No decimals are allowed. You can select whether you would like to activate the
commands Daily, Monthly on the day specified or Weekly on the day or days specified.
SAVE_OAD_IN(OwnNumber, 1)END_JOB
Figure 8.35 Parse String Action
Figure 8.36 Special Service
68
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
The .ini file containing the script is saved on the vGATE Control Unit and its path is defined under Command
File in the Special Service group box.
8 . 1 2 . 1 S C R I P T C O M M A N D S
The commands must be entered in the .ini file as follows. Please refer to Chapter 8.12.2 , which is intended
as a detailed description of format and syntax:
If you do not use remote tunneling, make sure the GATE Manager is not connected to the mobile gateway before you run any scripts. One remote channel is active for special services.
Table 8.4 Special Service Script Commands
Commands
ADD_MAX_LIMIT
Adds a calculated limit (integer value) to the SIM card’s Max. Limit 1 field. For prepaid SIM cards only.
BLOCK_DISC_PORT
The port is blocked. If a call is active, it is disconnected. The port’s link status is checked. If the link status is
not idle, the script command is stopped and will be carried out later.
BLOCK_PORT
The port will be blocked as soon as it is idle.
CANCEL_JOB_BLOCKING
Cancels blocking the SIM or controller. The job will continue to be executed.
CHANGE_DB_INT(<column>,<int>)
The set integer will be entered in the defined SIM column in the database (e.g. Priority, SIMCounter or
SIMCounter2).
CHANGE_DB_STRING(<column>,<string>)
The set string will be entered in the defined SIM column in the database (e.g. Userinfo1 or Userinfo2).
CHANGE_LIMIT
Writes a fixed calculated limit (integer value) in the SIM card’s Change Limit field. For prepaid SIM cards only.
CHANGE_LIMIT_ZERO
Can be set as a wait parameter. If the calculated change limit is 0, another command can be carried out.
CHANGE_MAXLIMIT
Writes a calculated limit (integer value) in the SIM card’s Max. limit 1 field. Can also be combined with
SET_MAX_LIMIT. For prepaid SIM cards only.
CHANGE_MSISDN_LIMIT(<MSISDN>,<limit>
Changes the limit for the SIM with the telephone number entered.
ii
69
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
DONT_CARE_SIMSTATUS
The SIM’s current status (registered, etc.) will be ignored.
END_JOB
Ends the job.
END_JOB_IF_VALUE_IS(<column>,<value>)
Ends the job if the value in the simcards column is a given value.
NOTE: This command must always be used before the BLOCK_PORT command.
END_JOB_IF_VALUE_IS_ABOVE(<column>,<int>)
Ends the job if the value in the simcards column is above a given integer value.
NOTE: This command must always be used before the BLOCK_PORT command.
END_JOB_IF_VALUE_IS_BELOW(<column>,<int>)
Ends the job if the value in the simcards column is below a given integer value.
NOTE: This command must always be used before the BLOCK_PORT command.
END_JOB_IF_VALUE_IS_NOT(<column>,<value>)
Ends the job if the value in the simcards column is not a given value.
NOTE: This command must always be used before the BLOCK_PORT command.
LIMIT_FAKTOR_M(<num>)
Defines the factor for calculating a limit from a wait parameter based on money values. The factor must al-
ways be entered as a float value in decimal notation (e.g. 6.0).
Example: For the following example, the entry ChargeUnitGenerate=1 (default is 10) is entered in the
mobile gateway’s pabx.cfg. The carrier sends a balance of €10.0. A call costs €0.24 per minute. Enter the
result of (€0.24 x 100) / 60 = 0.4. Enter LIMIT_FAKTOR_M(0.4). To calculate LIMIT_FAKTOR_M using
the balance factor (BF) set in the , enter LIMIT_FAKTOR_M=100/BF.
LIMIT_FAKTOR_T(<num>)
Defines the factor for calculating a limit from a wait parameter based on time values. The factor must always
be entered as a float value in decimal notation (e.g. 6.0).
Example: For the following example, the entry ChargeUnitGenerate=1 is entered in the mobile gate-
way’s pabx.cfg. The carrier sends a balance of 24 minutes and 10 seconds. To convert this figure into sec-
onds, enter LIMIT_FAKTOR_T(60.0).
Table 8.4 Special Service Script Commands (continued)
Commands
70
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
PARSE_TO_SIMCUSTOM_STRING(<bOverwrite>,<value count>,<parse Param1>,<name of param1 in DB>,
<parseParam2>,<name of param2 in DB>,…)
Parses an incoming SMS detected via Special Parse Actions in the vGATE carrier settings and saves the result
in the database:
bOverwrite: 0 or 1, 1 means old values in database are deleted before saving the new values.
value count: Count of value pairs (Param, Name in DB)
parseParam: Parse string. The syntax is the same as for wait parameters. Only string parameter (S) are al-
lowed.
name of param in DB: Name of the value in the database.
RECHARGE_IF_LIMIT_ABOVE(<int>)
Recharge is initiated if the calculated limit is higher than the limit entered.
RECHARGE_IF_LIMIT_ABOVE_WOREL(<int>)
Recharge is initiated if the calculated limit is higher than the limit entered. The SIM is not released following
the recharge process.
RECHARGE_IF_LIMIT_BELOW(<count>)
Initiates SIM recharge and closes job if the current prepaid limit is less than the value entered.
RECHARGE_IF_LIMIT_BELOW_WOREL(<int>)
Recharge is initiated if the calculated limit is lower than the limit entered. The SIM is not released following
the recharge process.
RECHARGE_SIM
SIM is recharged after script has ended. It is best to enter this command at the end of a script to avoid over-
lapping remote access.
RECHARGE_SIM_WOREL
SIM recharge is initiated and the SIM is not released following recharge.
RELEASE_RECEIVER_SIM
Releases the production SIM card in a balance transfer scenario. For instance, use this command to release
a production SIM card if a balance transfer from the master to the production SIM card failed. For more details
on balance transfer, please refer to Chapter 8.9.6 on page 59
RELEASE_SIM
SIM is released at the end of the script. If possible, a new SIM will then be assigned. It is best to enter this
command at the end or branching point of a script.
RELEASEBLOCK_IF_LIMIT_ABOVE(<int>)
The SIM will be released and blocked if its balance is above the value entered.
Table 8.4 Special Service Script Commands (continued)
Commands
71
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
RELEASEBLOCK_IF_LIMIT_BELOW(<int>)
The SIM will be released and blocked if its balance is below the value entered.
RELEASEBLOCK_SIM
The SIM will be released and blocked.
SAVE_OAD_IN(<column>,<flag>
Saves the OAD of a SIM from which an SMS with IMSI=<IMSI> has been sent. Set the flag at 1 to save the
number in the SIM’s OwnNumber column.
SEND_DTMF(<string>)
The DTMF string is sent to the service center number. For pauses between DTMF tones, enter a p for a pause
of one second and a P for a pause of 10 seconds.
NOTE: The service center number and mapping character must appear in the Carrier List (see Chapter 8.9.4)
and the mapping entries must exist in the route.cfg .
SEND_DTMF_IF_LIMIT_ABOVE(<limit>,<string>)
If the limit goes above the value entered, a connection is set up to the service center and the defined USSD
code is sent. The service center number must be entered in the carrier list.
Enter a ^ sign in front of each wait parameter to parse the value before the query response message.
SEND_DTMF_IF_LIMIT_BELOW(<limit>,<string>)
If the limit falls below the value entered, a connection is set up to the service center and the defined DTMF
string is sent. The service center number must be entered in the carrier list.
Enter a ^ sign in front of each wait parameter to parse the value before the query response message.
SEND_DTMF_NUM(<num>,<string>)
The DTMF string is sent to the defined number (<num>). For pauses between DTMF tones, enter a p for a
pause of one second and a P for a pause of 10 seconds.
SEND_DTMF_NUM_IF_LIMIT_ABOVE(<num>,<limit>,<string>)
If the limit goes above the value entered, a connection is set up to the defined number (<num>) and the
defined DTMF string is sent.
Enter a ^ sign in front of each wait parameter to parse the value before the query response message.
SEND_DTMF_NUM_IF_LIMIT_BELOW(<num>,<limit>,<string>)
If the limit falls below the value entered, a connection is set up to the defined number (<num>) and the de-
fined DTMF string is sent.
Enter a ^ sign in front of each wait parameter to parse the value before the query response message.
Table 8.4 Special Service Script Commands (continued)
Commands
72
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
SEND_DTMF_NUM_WAIT(<num>,<string>,<waitParam1>,<waitParam2>,...,<timeout>)
The DTMF code is sent to the defined <num>. This string sets a wait for defined query response messages.
For the proper syntax of wait parameters, see the entry for SEND_USSD_WAIT.
Example of a time value:
Parsed string: 10:25:32 in hr:min:sec
Wait parameter: [T%d:%d:%d] (enter [T%d:%d] for min:sec or [T%d] for sec).
Calculation: Limit = hr x 60 x limit factor + min x limit factor + sec x limit factor / 60
Example of a money value:
Parsed string: 11.55 in €.cent
Wait parameter: [M%d.%d]
Calculation:
Limit = (€ x 100 + cent) / limit factor
Example of a string:
Parsed string: The number 1234567890
Wait parameter: the number.[S%s]
Enter a ^ sign in front of each wait parameter to parse the value before the query response message.
SEND_DTMF_NUM_WAIT_IF_LIMIT_ABOVE(<num>,<limit>,<string>,<waitParam1>,<waitParam2>,...,
_ELSE_,<timeout>)
If the limit goes above the value entered, a defined DTMF string is sent to the defined number (<num>) and
the system waits for a response defined using the wait parameters as long as the timeout value entered. If
the response comes before the timeout, other commands can be carried out. If the timeout is set at 0, no
timeout will be used. If the limit does not rise above the value entered, the command defined by _ELSE_ will
be carried out. Please note that _ELSE_ must be defined. This string sets a wait for defined query response
messages. For the proper syntax of wait parameters, see the entry for SEND_USSD_WAIT.
Enter a ^ sign in front of each wait parameter to parse the value before the query response message.
SEND_DTMF_NUM_WAIT_IF_LIMIT_BELOW(<num>,<limit>,<string>,<waitParam1>,<waitParam2>,...,
_ELSE_,<timeout>)
If the limit falls below the value entered, a defined DTMF string is sent to the defined number (<num>) and
the system waits for a response defined using the wait parameters as long as the timeout value entered. If
the response comes before the timeout, other commands can be carried out. If the timeout is set at 0, no
timeout will be used. If the limit does not fall below the value entered, the command defined by _ELSE_ will
be carried out. Please note that _ELSE_ must be defined. This string sets a wait for defined query response
messages. For the proper syntax of wait parameters, see the entry for SEND_USSD_WAIT.
Enter a ^ sign in front of each wait parameter to parse the value before the query response message.
Table 8.4 Special Service Script Commands (continued)
Commands
73
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
SEND_DTMF_WAIT(<string>,<waitParam1>,<waitParam2>,...,<timeout>)
The DTMF code is sent to the service center number. This string sets a wait for defined query response mes-
sages. For the proper syntax of wait parameters, see the entry for SEND_USSD_WAIT.
Example of a time value:
Parsed string: 10:25:32 in hr:min:sec
Wait parameter: [T%d:%d:%d] (enter [T%d:%d] for min:sec or [T%d] for sec).
Calculation: Limit = hr x 60 x limit factor + min x limit factor + sec x limit factor / 60
Example of a money value:
Parsed string: 11.55 in €.cent
Wait parameter: [M%d.%d]
Calculation:
Limit = (€ x 100 + cent) / limit factor
Example of a string:
Parsed string: The number 1234567890
Wait parameter: the number.[S%s]
NOTE: The service center number and mapping character must appear in the Carrier List (see Chapter 8.9.4)
and the mapping entries must exist in the route.cfg.
Enter a ^ sign in front of each wait parameter to parse the value before the query response message.
SEND_DTMF_WAIT_IF_LIMIT_ABOVE(<limit>,<string>,<waitParam1>,<waitParam2>,..., _ELSE_,<time-
out>)
If the limit goes above the value entered, a defined DTMF string is sent to the service center and the system
waits for a response defined using the wait parameters as long as the timeout value entered. If the response
comes before the timeout, other commands can be carried out. If the timeout is set at 0, no timeout will be
used. The service center number must be entered in the carrier list. If the limit does not rise above the value
entered, the command defined by _ELSE_ will be carried out. Please note that _ELSE_ must be defined.
Enter a ^ sign in front of each wait parameter to parse the value before the query response message. This
string sets a wait for defined query response messages. For the proper syntax of wait parameters, see the
entry for SEND_DTMF_WAIT.
SEND_DTMF_WAIT_IF_LIMIT_BELOW(<limit>,<string>,<waitParam1>,<waitParam2>,..., _ELSE_,<time-
out>)
If the limit falls below the value entered, a defined DTMF string is sent to the service center and the system
waits for a response defined using the wait parameters as long as the timeout value entered. If the response
comes before the timeout, other commands can be carried out. If the timeout is set at 0, no timeout will be
used. The service center number must be entered in the carrier list. If the limit does not fall below the value
entered, the command defined by _ELSE_ will be carried out. Please note that _ELSE_ must be defined.
Enter a ^ sign in front of each wait parameter to parse the value before the query response message. This
string sets a wait for defined query response messages. For the proper syntax of wait parameters, see the
entry for SEND_DTMF_WAIT.
Table 8.4 Special Service Script Commands (continued)
Commands
74
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
SEND_RNDREC_SMS(<recipientcount>,<recipient1>,<recipient2>,...,<message>)
Sends an SMS message to a random recipient out of up to 16 recipients. In recipientcount, enter the number
of recipients.
SEND_RNDREC_SMS_WAIT(<recipientcount>,<recipient1>,<recipient2>,...,<message>,<waitParam1>,
<waitParam2>,...,<timeout>)
Sends an SMS message to a random recipient out of up to 16 recipients and waits for a defined response. In
recipientcount, enter the number of recipients. For the proper syntax of the wait parameters, see the entry for
SEND_USSD_WAIT.
SEND_SMS(<to>,<msg>)
Sends a defined SMS (<msg>) to a defined recipient (<to>). If you enter OAD as the recipient, the SMS will
be sent to the origination number of a previously received SMS. You can also use this command to retrieve a
SIM’s own number (cf. Chapter 8.11.5 on page 67 ).
NOTE: The service center number and mapping character must appear in the Carrier List (see Chapter 8.9.4)
and the mapping entries must exist in the route.cfg. SMS service numbers must appear in the
pabx.cfg.
SEND_SMS_IF_LIMIT_ABOVE(<limit>,<to>,<msg>)
A defined SMS is sent to the number entered if the limit goes above the value entered.
SEND_SMS_IF_LIMIT_BELOW(<limit>,<to>,<msg>)
A defined SMS is sent to the number entered if the limit falls below the value entered.
Table 8.4 Special Service Script Commands (continued)
Commands
75
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
SEND_SMS_WAIT(<to>,<msg>,<waitParam1>,<waitParam2>,...,<timeout>)
Sends a defined SMS and waits for a defined response. If you enter OAD as the recipient, the SMS will be sent
to the origination number of a previously received SMS. You can also use this command to retrieve a SIM’s
own number (cf. Chapter 8.11.5 on page 67 ). This string sets a wait for defined query response messages.
For the proper syntax of wait parameters, see the entry for SEND_USSD_WAIT.
Example of a time value:
Parsed string: 10:25:32 in hr:min:sec
Wait parameter: [T%d:%d:%d] (enter [T%d:%d] for min:sec or [T%d] for sec).
Calculation: Limit = hr x 60 x limit factor + min x limit factor + sec x limit factor / 60
Example of a money value:
Parsed string: 11.55 in €.cent
Wait parameter: [M%d.%d]
Calculation:
Limit = (€ x 100 + cent) / limit factor
Example of a string:
Parsed string: The number 1234567890
Wait parameter: the number.[S%s]
NOTE: The service center number and mapping character must appear in the Carrier List and the mapping
entries must exist in the route.cfg (see Chapter 8.9.4).
Example: In the following example, the SMS ’send number’ is sent to the number 017234567890 and the
system waits for the string ’the number’ and the number that follows will be entered in the vGATEDesktop
SIM View Own Number column.
SEND_SMS_WAIT(017234567890, send number, the number.[S%s], 3)
{
SET_DB_STRING(OwnNumber)
UNBLOCK_PORT
END_JOB
}
NOTE: The service center number and mapping character must appear in the Carrier List (see Chapter 8.9.4)
and the mapping entries must exist in the route.cfg. SMS service numbers must appear in the
pabx.cfg.
Enter a ^ sign in front of each wait parameter to parse the value before the query response message.
Table 8.4 Special Service Script Commands (continued)
Commands
76
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
SEND_SMS_WAIT_IF_LIMIT_ABOVE(<limit>,<to>,<msg>,<waitParam1>,<waitParam2>,...,
_ELSE_<timeout>)
If the limit goes above the value entered, a defined SMS is sent to the number entered and the system waits
for a response defined using the wait parameters as long as the timeout value entered. If the response comes
before the timeout, other commands can be carried out. If the timeout is set at 0, no timeout will be used. If
the limit does not rise above the value entered, the command defined by _ELSE_ will be carried out. Please
note that _ELSE_ must be defined. For the proper syntax of wait parameters, see the entry for
SEND_USSD_WAIT.
Enter a ^ sign in front of each wait parameter to parse the value before the query response message.
SEND_SMS_WAIT_IF_LIMIT_BELOW(<limit>,<to>,<msg>,<waitParam1>,<waitParam2>,...,
_ELSE_<timeout>)
If the limit falls below the value entered, a defined SMS is sent to the number entered and the system waits
for a response defined using the wait parameters as long as the timeout value entered. If the response comes
before the timeout, other commands can be carried out. If the timeout is set at 0, no timeout will be used. If
the limit does not fall below the value entered, the command defined by _ELSE_ will be carried out. Please
note that _ELSE_ must be defined. For the proper syntax of wait parameters, see the entry for
SEND_USSD_WAIT.
Enter a ^ sign in front of each wait parameter to parse the value before the query response message.
SEND_USSD(<code>)
The USSD code is sent to the service center number. The service center number and mapping character must
appear in the Carrier List.
NOTE: The service center number and mapping character must appear in the Carrier List (see Chapter 8.9.4)
and the mapping entries must exist in the route.cfg.
SEND_USSD_IF_LIMIT_ABOVE(<limit>,<string>)
If the limit goes above the value entered, a connection is set up to the service center and the defined USSD
code is sent. The service center number must be entered in the carrier list.
Enter a ^ sign in front of each wait parameter to parse the value before the query response message.
SEND_USSD_IF_LIMIT_BELOW(<limit>,<string>)
If the limit falls below the value entered, a connection is set up to the service center and the defined USSD
code is sent. The service center number must be entered in the carrier list.
Enter a ^ sign in front of each wait parameter to parse the value before the query response message.
Table 8.4 Special Service Script Commands (continued)
Commands
77
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
SEND_USSD_WAIT(<code>,<waitParam1>,<waitParam2>,...,_TIMEOUT_,<timeout>)
The USSD code is sent to the service center number. This string sets a wait for defined query response mes-
sages. You must set the limit parsing definition[T%d:%d:%d], [M%d.%d] or [S%s] if a limit is to be
parsed based on a string (S) and/or calculated based on time (T) or money (M). The entry
LIMIT_FAKTOR_M or LIMIT_FAKTOR_T must also be set in this case. Wait parameters must be sepa-
rated by a comma. Two time entries can appear separated by a pipe (|). For example, [T%d:%d:%d | %d:%d]. You can set two strings together by entering an & sign between them. For example, balance: [M%d.%d:%d] & bonus: [M%d.%d]. The two resulting values will be added together and calculated
with the balance factor to form the limit. If no second value exists, only the first will be calcultated. If no first
value exists, there will be no result. The job is closed if no answer is recognized in the number of minutes set
for a timeout. Each wait parameter requires a branch, defined by {...}. If the timeout is set at 0, no timeout
will be used. If you enter _TIMEOUT_, in front of a defined <timeout>, a new command will be carried out
if a response does not occur for a wait parameter in the allotted time. Each_TIMEOUT_ requires a branch for
the alternative command, defined by {...}. Each final set of brackets must end with the command
END_JOB.
Example of a time value:
Parsed string: 10:25:32 in hr:min:sec
Wait parameter: [T%d:%d:%d] (enter [T%d:%d] for min:sec or [T%d] for sec).
Calculation: Limit = hr x 60 x limit factor + min x limit factor + sec x limit factor / 60
Example of a money value:
Parsed string: 11.55 in €.cent
Wait parameter: [M%d.%d]
Calculation:
Limit = (€ x 100 + cent) / limit factor
NOTE: The service center number and mapping character must appear in the Carrier List (see Chapter 8.9.4)
and the mapping entries must exist in the route.cfg.
Enter a ^ sign in front of each wait parameter to parse the value before the query response message. This
applies for all commands with wait parameters.
SEND_USSD_WAIT_IF_LIMIT_ABOVE(<limit>,<string>,<waitParam1>,<waitParam2>,.., _ELSE_,<timeout>)
If the limit goes above the value entered, a defined USSD code is sent to the service center and the system
waits for a response defined using the wait parameters as long as the timeout value entered. If the response
comes before the timeout, other commands can be carried out. If the timeout is set at 0, no timeout will be
used. The service center number must be entered in the carrier list. If the limit does not rise above the value
entered, the command defined by _ELSE_ will be carried out. Please note that _ELSE_ must be defined.
Enter a ^ sign in front of each wait parameter to parse the value before the query response message. This
string sets a wait for defined query response messages. For the proper syntax of wait parameters, see the
entry for SEND_USSD_WAIT.
Table 8.4 Special Service Script Commands (continued)
Commands
78
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
SEND_USSD_WAIT_IF_LIMIT_BELOW(<limit>,<string>,<waitParam1>,<waitParam2>,...,_ELSE_,<timeout>)
If the limit falls below the value entered, a defined USSD code is sent to the service center and the system
waits for a response defined using the wait parameters as long as the timeout value entered. If the response
comes before the timeout, other commands can be carried out. If the timeout is set at 0, no timeout will be
used. The service center number must be entered in the carrier list. If the limit does not fall below the value
entered, the command defined by _ELSE_ will be carried out. Please note that _ELSE_ must be defined.
Enter a ^ sign in front of each wait parameter to parse the value before the query response message. This
string sets a wait for defined query response messages. For the proper syntax of wait parameters, see the
entry for SEND_USSD_WAIT.
SET_DB_STRING(<column>)
If a string was parsed in a previous response message, this string will be entered in the defined SIM column
in the database.
SET_DB_STRING_PARSE(<parseparam>,<column>)
If a string was parsed in a previous response message or if the script was started by carrier-specific actions,
this SMS or string will be parsed according to the parse parameter and entered in the defined SIM column in
the database.
EXAMPLE: SET_DB_STRING_PARSE(balance [S%s] , UserInfo2)
SET_DB_TIMEVAL(DBField)
The current timestamp appears in the DBFIELD in the database.
SET_DB_USEREG_STRING(<column>)
Saves a parse result string into the defined column of the user registration table in the database.
SET_MAX_LIMIT(<val x>,<val y>)
Changes the CHANGE_LIMIT to val y if the calculated limit is greater than val x. If the calculated limit
is less than val x, the calculated limit will be used. CHANGE_LIMIT must be set for this command to be
carried out.
SET_MIN_LIMIT(<val x>,<val y>)
Changes the CHANGE_LIMIT to val y if the calculated limit is greater than 0 and less than val x. This
command must appear before the WAIT commands.
SET_SIM_BK_COLOR(<r,g,b>)
Enter RGB values, separated with commas, to change the SIM background colors.
SET_TIMEOUT(<count>)
A number of minutes can be entered here to set a timeout for scripts without a WAIT function. Only whole
numbers are allowed.
Table 8.4 Special Service Script Commands (continued)
Commands
79
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
SLEEP(<millisec>)
Sets a pause (in milliseconds) in the job.
TARIFF_LIMIT_FAKTOR(<major currency unit/minute>,<ChargeUnitGenerate>)
The limit factor is aturomatically calculated based on the values entered. Eliminated the need to calculate
LIMIT_FAKTOR_M.
EXAMPLE: For charges of €0.25/minute and a ChargeUnitGenerate of 1, the entry would look like this:
TARIFF_LIMIT_FAKTOR(0.25, 1)
NOTE: This entry cannot be used in conjunction with LIMIT_FAKTOR_T or LIMIT_FAKTOR_M
UNBLOCK_PORT
The port is unblocked.
WAIT_MSG(<waitparam1>,<waitParam2>,...,<timeout>)
Sets a wait for defined messages. This string sets a wait for defined messages. For the proper syntax of wait
parameters, see the entry for SEND_USSD_WAIT.
Example of a time value:
Parsed string: 10:25:32 in hr:min:sec
Wait parameter: [T%d:%d:%d] (enter [T%d:%d] for min:sec or [T%d] for sec).
Calculation: Limit = hr x 60 x limit factor + min x limit factor + sec x limit factor / 60
Example of a money value:
Parsed string: 11.55 in €.cent
Wait parameter: [M%d.%d]
Calculation:
Limit = (€ x 100 + cent) / limit factor
NOTE: Enter a ^ sign in front of each wait parameter to parse the value before the query response message.
Table 8.4 Special Service Script Commands (continued)
Commands
80
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 1 2 . 2 S C R I P T E X A M P L E
The following example shows a limit factor (LIMIT_FAKTOR_M) based on money, with a calculating factor of
0.4 and a limit factor based on time (LIMIT_FAKTOR_T), whereby the factor is 60. If the calculated limit is great-
er than 0 and less than 9, the limit will be set at 10 (SET_MIN_LIMIT(9,10)). The port will be blocked through
the remote interface (BLOCK_PORT). A pause of five seconds will occur before the USSD code is sent
(SLEEP(5000)).
The entry SEND_USSD_WAIT contains one wait parameter and a timeout of five minutes ((*100#, accountstatus: [M%d.%d], 5)). The USSD code *100# (acount-status query) is sent an the system waits for a
response containing the words account status and a monetary value ([M%d.%d]). If the response comes
within five minutes, the account status is calculated using the value entered in LIMIT_FAKTOR_M and the SIM
will be recharged if the limit is below that set in RECHARGE_IF_LIMIT_BELOW (2000). If SIM recharge is
to be initialized, the job will end here.
If not, USSD code *123*12*01# (activation of special service, e.g. special rate) is sent, with the wait parameters
is active (wait parameter 1) and has been activated (wait parameter 2) and a timeout of five minutes.
If wait parameter 1 (is active) comes within five minutes, the port will be blocked and USSD code *125# for
special rate time status is sent (SEND_USSD_WAIT(*125#, special rate: [T%d:%d], 5)). If the
response comes before the timeout of five minutes, the time for the special raite is calculated using the
LIMIT_FAKTOR_T(60.0). The port is blocked through the remote interface. The calculated limit is set on the
mobile gateway and the vGATEDesktop with the command CHANGE_LIMIT. The port is unblocked and the job
is ended.
If the calculated value is greater than 0 and less than 9, a limit of 10 is set on the mobile gateway.
If wait parameter 2 (has been activated) comes within five minutes, the port will be blocked and USSD
code *125# for special rate time status is sent (SEND_USSD_WAIT(*125#, special rate:[T%d:%d], 5)). If the response comes before the timeout of five minutes, the time for the special raite is cal-
culated using the LIMIT_FAKTOR_T(60.0). The port is blocked through the remote interface. The calculated
limit is set on the mobile gateway and the vGATEDesktop with the entry CHANGE_LIMIT. The port is unblocked
and the job is ended.
If the calculated value is greater than 0 and less than 9, a limit of 10 is set on the mobile gateway.
Table 8.5 Special Service Variables
Variables
<RECHARGE_CODE>
This variable is used in a Send command as a place holder within the <code> or <string> parameters. During
script run, the variable is replaced by the the SIM card’s recharge code which is taken from the recharge list.
If no code can be found, the script is cancelled with an error message.
<RECEIVER_NUMBER>
This variable is used in a Send command as a place holder within the <code>, <string>, or <to> parameters.
During script run, the variable is replaced by the the receiving (production) SIM card’s own number. Use this
variable in a balance transfer scenario. For an example, please see Chapter 8.9.6.3 on page 62 .
81
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
If the wait string account status does not occur within five minutes, the command entered for _TIMEOUT_will be carried out: The CHANGE_DB_STRING account status not received will appear in the UserInfo1
field of the database. The SIM will be released and blocked.
8 . 1 3 D E F I N I N G T H E S I M ’ S P R O T O C O L
Near the bottom of the left side of the SIM Options dialog,
you can select which protocol will be used for dual SIMs. If you
select Automatic (default), the vGATE will set the protocol
based on that of the mobile gateway. If the mobile gateway is
UMTS, the SIM will be assigned as a UMTS SIM; if the mobile
gateway is GSM, the SIM will be assigned as a GSM SIM.
If you select UMTS, the SIM will be assigned as a UMTS SIM, regardless of the protocol on the mobile gateway. If
you select GSM, the SIM will be assigned as a GSM SIM, regardless of the mobile gateway’s protocol. If you try to
assign a UMTS SIM to a GSM iGATE or vice versa, a confirmation dialog will appear.
LIMIT_FAKTOR_M(0.4)LIMIT_FAKTOR_T(60.00)SET_MIN_LIMIT(9,10)BLOCK_PORTSLEEP(5000)SEND_USSD_WAIT(*100#,account status: [M%d.%d], _TIMEOUT_, 5){
RECHARGE_IF_LIMIT_BELOW(2000)
SEND_USSD_WAIT(*123*12*01#, is active, has been activated, 5){
BLOCK_PORTSEND_USSD_WAIT(*125#, special rate: [T%d:%d], 5){
BLOCK_PORTCHANGE_LIMITUNBLOCK_PORTEND_JOB
}}{
BLOCK_PORTSEND_USSD_WAIT(*125#, special rate: [T%d:%d], 5){
BLOCK_PORTCHANGE_LIMITUNBLOCK_PORTEND_JOB
}}
}{
CHANGE_DB_STRING(UserInfo1, account status not received)RELEASEBLOCK_SIMEND_JOB
}
This option is only possible with vGATE SIM Unit Version 29 or higher. The vGATE SIM Unit Version 29 is compatible only with vGATE Version 12.0 or higher.
Figure 8.37 SIM Protocol
ii
82
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 1 4 D E C O M M I S S I O N I N G S I M S
To take a SIM permanently out of commission, select Change SIM Options from the SIM’s context menu to open
the SIM Optionsdialog. Activate the checkbox Terminate SIM after and use the drop-down menu to set a ter-
mination date. The SIM will be taken out of commission at the end of that day. Assigned SIMs will not be auto-
matically released after reaching the decommission date. Decommissioned SIMs will never be assigned again.
The priority assigned to a SIM card can be changed automatically before termination. Check the Change SIM Pri-
ority to box and select a priority level from the drop-down menu.
8 . 1 5 E D I T I N G M O B I L E G A T E W A Y S
Figure 8.39 edit window
Figure 8.38 Decommissioning SIMs
83
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
To set up a mobile gateway and assign it to a group, please follow the instructions in Chapter 8.1 . You may
want to include additional options for mobile gateways, which can be entered into the edit window. Here is a de-
scription of the information that can be entered:
These settings must correspond with the settings on the individual mobile gateway. We recommend that you do not change the default port number.
Table 8.6 edit window
Entry Description
iGate This part of the window is for basic setup information.
Name Enter a meaningful name for the mobile gateway here.
IP Address Enter the mobile gateway’s IP address here.
Port Enter the mobile gateway’s port number.
Number of CTRLs Select a number of controllers for this mobile gateway in increments of
four.
Position Enter the X and Y coordinates you have calculated for the mobile gate-
way’s position.
Serial # The serial number appears automatically.
Group Use the drop-down menu to assign a mobile gateway to a group (only
possible when adding a new mobile gateway).
Type The system type appears automatically.
Use Remote Tunnel Activate this checkbox to reserve port 4446 for tunneling. This ensures
that the connection between the vGATE and the mobile gateways re-
mains unobstructed when the GATE Manager is connected to the mobile
gateway. The vGATE uses this port to generated calls and SMS and for
SIM recharging and special scripting. The following entry must be made
in the mobile gateway’s pabx.cfg:
MoipPort2=4446The mobile gateway must be restarted to activate this function.
Always Use local SIM Unit Address If the local IP address and the public host address are entered in the
vGateConfig, you can set this flag to send the vGATE SIM Unit’s local IP
address to the mobile gateway. This is useful when the mobile gateway
can reach the vGATE SIM Unit at its local IP address or if both devices are
in the same location.
New Protocol Activate this checkbox to send the settings from the carrier list to the mo-
bile gateways (version 14.6 or higher). See Chapter 8.10 .
ii
84
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
<V14.6 Activate this checkbox to send the settings from the carrier list to the mo-
bile gateways which have a version older than 14.6.
Telit G3 Modules Activate this checkbox if the mobile gateway contains Telit G3 modules.
Remote Access Enter the following information if you want to alter or secure remote ac-
cess to the mobile gateway using GATE Manager.
Port Leave this space empty to use the default port for GATE Manager access.
Password For added security, enter a password for GATE Manager access.
Use FTP for file
transfer
Activate the checkbox to transfer files in GATE Manager via FTP.
User Enter the user name configured to transfer files in GATE Manager via FTP.
Password Enter the password configured to transfer files in GATE Manager via FTP.
Port Enter the port for using the GATE Manager to transfer files via FTP. De-
fault 21.
Remote State Actions This section is for setting the number of registration retries before a SIM
is blocked.
ASR low If you set log only (recommended) and select Single, an error message
will be entered in the database if the port’s ASR falls below 30%. If you
select Multiple, an error message will be entered in the database if the
port’s ASR falls below 30% 3 times. If you set a number, the SIM will be
released and reassigned as often as entered. After unsuccessful retries
have occurred as many times as entered, the SIM will be blocked.
Too many announcements Depending on the settings on the individual mobile gateway, an error
message will be sent when a certain number of calls result in a recorded
announcement. If you set log only, an error message will be entered in
the database when the amount set in the mobile gateway is reached. If
you set a number (1 is recommended), the SIM will be released and re-
assigned as often as entered. After unsuccessful retries have occurred as
many times as entered, the SIM will be blocked.
SIM blocked (GSM) When a SIM is blocked, an error message is automatically entered in the
database. This setting cannot be changed.
CTRL restart timeout A port will be blocked if it has had to restart the number of times entered.
If you set log only (not recommended), an error message will be entered
in the database when the amount set is reached.
Table 8.6 edit window(continued)
Entry Description
85
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
SIM barred (GSM) Enter the number of times SIM registration is to be allowed to fail (4 is
recommended) before the SIM and its port are blocked (only occurs when
Block former SIM is activated).
Block former SIM When this box is checked, SIMs will be blocked after the number of SIM
barred occurrences entered.
Get Files Activate the checkbox to retrieve the corresponding log file(s) at the time
entered.
Get File 1 For second generation mobile gateways enter the following:
/data/cdr%date:ymd-1%0.log. Files will be generated each
day. -1 means that they will be retrieved for the day before today (today
minus one). A folder containing the files for each mobile gateway is cre-
ated here: F:\vGATE\CDR\iGATE-<name>. For mobile gateways
that do not contain a compact flash, enter the following:
/boot/cdr%date:ymd-1%0.log.
Get File 2 You can enter settings for retrieving other log files here. For example, to
retrieve CDRs from 3 days ago, enter the following:
/data/cdr%date:ymd-3%0.log. For mobile gateways that do
not contain a compact flash, enter the following:
/boot/cdr%date:ymd-1%0.log.
To retrieve a failed log, enter:
/boot/failed%date:ymd-1%0.log
Start Time (for Get File 1) Enter the time at which CDRs Filename 1 are to be retrieved daily. Three
unssuccessful retrieval attempts will result in a retrieval pause of six
hours, after which a new attempt is made.
Start Time (for Get File 2) Enter the retrieval time for CDR Filename 2 here.
Table 8.6 edit window(continued)
Entry Description
86
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 1 6 S I M H I S T O R Y
Right-click a SIM and select SIM History from the Reports submenu to call up a window containing information
about that SIM’s activity.
Entries are color-coded as follows:
Green=OK
Yellow=Warning
Orange=Minor
Red=Major
Pink=Critical
For a list of error messages and their respective levels of importance, please see Table 8.7 .
Limit Call/SMS
Generation
This group box allows you to set a limit for generation of calls and/or
SMS.
Maximum simultaneous calls This option allows you to set a maximum number of calls that can be
started simultaneously from different mobile gateways. Enter the maxi-
mum number or check No limit if you do not want to set a limit.
Maximum simultaneous SMS This option allows you to set a maximum number of SMS that can be
started simultaneously from different mobile gateways. Enter the maxi-
mum number or check No limit if you do not want to set a limit.
User Information You can enter two user information strings, which will then appear in the
User Info 1 and User Info 2 columns. If you activate Save Mainte-
nance Actions in User Info in the Options menu, an entry will appear
in the defined user info column every time maintenance mode is set or
reset.
Table 8.6 edit window(continued)
Entry Description
Figure 8.40 SIM History
87
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
The following messages correspond with these warning levels:
Table 8.7 SIM Warning Messages
Warning Message
Warning Maximum limit reached
Prepaid SIM recharge finally failed, SIM blocked
Prepaid SIM: Error in upgrade, SIM blocked
Daily duration limit reached, SIM blocked
Prepaid SIM limit reached, SIM blocked
Prepaid SIM: maximum upgrade count reached
Prepaid SIM: No recharge number found
Remote client GW xxx: link on Ctrl xxx active
Minor SIM broken (TCP connection) occurred
SIM broken occurred
Balance check failed, maximum retries used
Error in special recharge job. Prepaid SIM limit reached, SIM blocked.
(e.g. maximum upgrade count reached)
SIM blocked by script
Recharge SIM: Error while sending recharge call
Sending recharge call (OK), cannot start wait timer, no limit indication
after approximately xxx minutes. Recharge Number xxx was used with
code xxx for GW xxx, Addr xxx, IMSI xxx
Error while sending balance call. Recharge Number xxx was used with
code xxx for GW xxx, Addr xxx, IMSI xxx
Major Too many CTRL sleep occurred
Balance verification failed. New Balance is xxx smaller than maximum
vGATE limit
Error in special job
GW:[xx] Ctrl:[xx] SIM blocked after announce check, remoteStatus:[Port
blocked (too many announcements)] occurred 2 times
Too many announce check failed, count = 0
GW:[xxx] Ctrl:[xxx] RemoteStatus:[SIM barred (GSM)] Release SIM
Remote client GW xxx: Recharge SIM xxx error: [Counter<=1]
Critical CTRL: SIM broken (TCP connection) occurred
CTRL: SIM brocken occurred
No SMS sending of error on CTRL
CTRL was incorrectly configured (pabx.cfg)
88
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Select the Export to File from the context menu to export the report to a .txt, .xls or .slk file
The window contains the following information:
The following icons appear in the upper left-hand corner of the window:
Table 8.8 SIM History
Column Description
Timestamp Time at which the action described in the status message occurred.
Position The SIM’s position in the vGATE SIM Unit.
Gateway The mobile gateway to which the SIM is assigned.
Ctrl # The controller number to which the SIM is assigned.
Status The SIM’s status.
Category Status category: 0=status OK, 1=Warning, 2=Minor, 3=Major, 4=Critical.
Table 8.9 SIM History Icons
Icon Description
Click this icon to actualize the information displayed in the history. All new information will be re-
trieved from the database.
Click this icon to call up a dialog to set filters. Check the filters you would like to set and enter the
corresponding information. Click OK to activate the filters. Only the information you have selected
will be displayed.
Click this icon to deactivate the filters you have set for this SIM. All available information will be dis-
played in this SIM’s history if you click this icon.
89
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 1 7 v G A T E S T A T I S T I C S
You can call up SIM statistics and call statistics for SIMs, controllers, mobile gateways and for groups. The
vGATEDesktop can also display line charts with various statistical information for mobile gateways and for groups.
Values are calculated serially every 5 to 60 seconds, depending on the number of controllers. Statistics from the
current and previous months are saved in the database. The following values appear in at least one of the various
statistic windows:
Table 8.10 vGATEDesktop Statistics
Statistic Definition
ACD The Average Call Duration is the average length of calls on the SIM.
ASR1 The Answer Seizure Ratio is the percentage of calls that result in a connection. ASR1
does not regard connection attempts aborted by the A subscriber as aborted connec-
tions.
ASR2 The Answer Seizure Ratio is the percentage of calls that result in a connection. ASR2
regards connection attempts aborted by the A subscriber as aborted connections.
Assign Time Shows the amount of time the SIM was assigned.
Carrier Shows the name of the carrier.
Connected Calls Shows the number of successfully connected calls placed using the SIM.
Ctrl Shows the controller on which the SIM was active.
Dur/Asn Shows the percentage of the Assign Time that the card was connected.
Duration Shows the amount of time the SIM was connected while it was assigned.
Gateway Shows the name of the mobile gateway on which the SIM was active.
Incoming Calls Shows the number of incoming calls placed using the SIM.
Outgoing Calls Shows the number of outgoing calls placed using the SIM.
Position Shows the SIMs position number.
Remote Busy Shows the number of calls that resulted in a busy signal.
Timestamp Shows the time when the SIM was released.
IMSI Shows the SIM’s IMSI.
Own Number Shows the call number for the SIM.
Disconnected Shows the number of disconnected calls.
90
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 1 7 . 1 S I M S T A T I S T I C S
Figure 8.41 SIM Statistics
You can access averaged SIM statistics for marked SIMs, controllers and mobile gateways clicking the correspond-
ing icon in the toolbar and use the drop-down menu to select beginning and ending dates for the statistics
displayed. You can also access averaged SIM statistics for marked SIMs, controllers, mobile gateways and groups
through the context menu in the respective view:
SIM view: select SIM Statistics from the Reports submenu in the context menu.
controller view: select Show SIM Statistics from the context menu or from the context menu in the
Show Call Statistics window (see Chapter 8.17.2).
mobile gateway view: select Show SIM Statistics from the context menu in the Show Call Statistics
window (see Chapter 8.17.2).
group view: select Show SIM Statistics from the context menu in the Show Call Statistics window
(see Chapter 8.17.2).
8 . 1 7 . 2 C A L L S T A T I S T I C S
You can access averaged call statistics for mobile gateways or groups by clicking the icon in the toolbar.
Select Show Call Statistics from the context menu in the controller, mobile gateway or group view to display
statistics for the marked element. Using the drop-down menu, you can set filters in the dialog that appears. Select
Figure 8.42 Call Statistics
91
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
a Carrier to display call statistics only for one carrier. Use the drop-down calendar in Begin and End to limit the
statistics to calls for a specific time frame. To display call statistics for a specific Timezone, select a Timezone from
the list.
8 . 1 7 . 3 C A L L C H A R T S
Figure 8.43 Call Chart
You can access a line chart with averaged call statistics by clicking the
icon in the toolbar or by selecting Show Call Chart in the
mobile gateway or group view. Using the drop-down menu, you can
set filters in the dialog that appears. Select a Carrier to display call
statistics only for one carrier. To limit the statistics to calls for a specific
Week, select daily for the current day, current for the current week,
current - 1 for last week, current - 2 for two weeks ago, and so on.
8 . 1 8 W H A T T H E I N F O R M A T I O N O N T H E v G A T E D e s k t o p M E A N S
The windows listing mobile gateways, controllers and SIMs appear in table form. Each window contains informa-
tion listed in columns. You can change the position of the columns by left-clicking the column heading and drag-
ging it to the desired position. You can reverse the order of the rows in each window by clicking the heading with
the arrow.
Figure 8.44 Call Chart Filter
92
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
This is what the columns means:
Table 8.11 vGATEDesktop Columns
Column Description
Mobile Gateways
Name Lists the mobile gateways in the selected group by name.
Address Shows the IP address for the corresponding mobile gateway.
Status Contains status messages and the serial number.
Serial# Shows the mobile gateway’s serial number (second generation mobile gateway’s only).
System Type Lists the type of system in the vGATE.
User Info 1 Contains the maintenance information if Save Maintenance Actions in User
Info ... from the Options menu has been selected for Gateway User Information 1.
Can also be used for manual entries.
User Info 2 Contains the maintenance information if Save Maintenance Actions in User
Info ... from the Options menu has been selected for Gateway User Information 2.
Can also be used for manual entries.
Controllers
CTRL Lists the controller numbers.
Active Position Lists the SIMs that are currently active at the corresponding port.
Limit 1 Reserved Posi-
tions
Refers to the position of all SIMs reserved with Max Limit 1 to the controller.
Limit 2 Reserved Posi-
tions
Refers to the position of all SIMs reserved with Max Limit 2 to the controller.
Limit Choice Lists which settings have been defined in Advanced Limit Choice (see context
menu Table 8.15 ). All is the default setting.
Current Limit Shows which limit is currently being used.
Remote State Contains status messages for the controller sent by the mobile gateway.
CTRL Info Shows comments you have entered for this controller.
Action Lists actions currently being carried out. Possibilities are Release and Search and
Assign.
SIM Info 1 Shows Info 1 comments you have entered for the SIM that is currently active.
Error Lists errors that occur at the corresponding port (UMTS).
93
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Status Lists the controller’s status:
0 = Okay
1 = Waiting for an action
UMTS If an X appears in this column, the controller is a UMTS controller.
RSSI Lists the RSSI values for the controllers.
ASR1 Lists the ASR1 values for the controllers
ASR2 Lists the ASR2 values for the controllers
ACD Lists the ACD values for the controllers
SIMs
Position Lists SIM cards by their positions in the SIM 60 Carrier. The syntax for the position
numbers is <vGATE SIM Unit>.<vGATE Module>.<SIM position>. The list is color-
coded, so that all the positions listed on the same background color represent one
vGATE Module.
Color Lists the colors that have been set to mark individual SIMs, e.g. according to carrier.
IMSI Lists the SIMs’ International Mobile Subscriber Identity number.
Change SIM Limit Shows the limit (in 10-second time units) at which the mobile gateway will change
to the next SIM.
Max Limit 1 Shows the number of 10-second units after which the SIM will no longer be used for
timezones to which it has been assigned with Max Limit 1.
Count (L1) Shows the Max Limit 1 units that have been used.
Max Limit 2 Shows the number of 10-second units after which the SIM will no longer be used for
timezones to which it has been assigned with Max Limit 2.
Count (L2) Shows the Max Limit 2 units that have been used.
Limit A/B/C Shows the advanced limits that have been set for this SIM.
Count A/B/C Shows the number of advanced limit units that have been used for this SIM.
Last Use Shows when the SIM was last active.
Status Lists the SIMs status:
0=OK
1=database error
Pause Shows the length of the pause set for this SIM after each release.
Priority Lists the SIMs’ defined priority.
Table 8.11 vGATEDesktop Columns (continued)
Column Description
94
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Error Shows error messages. The line also appears highlighted in red or yellow.
Count (L1) Yesterday If Reset SIM Counter Daily is set in the vGATECtrl, this column shows the Max
Limit 1 units used on the previous day.
Count (L2) Yesterday If Reset SIM Counter Daily is set in the vGATECtrl, this column shows the Max
Limit 2 units used on the previous day.
Current Count Shows the number of units used in the current call.
Own Number Shows the SIM’s call number.
SMS Count Shows the ratio of the number of SMS that have been sent to the number configured
to be sent.
Next SMS Shows when the SIM will send the next SMS.
Call Count Shows the ratio of the number of outgoing calls that have been sent to the number
configured to be sent.
Next Call Shows when the SIM will make the next outgoing call.
Info 1 Shows comments you have entered for this SIM.
Info 2 Shows comments you have entered for this SIM.
Active Release Shows the number of minutes you have defined that a SIM will be active before it is
released.
Max Call Duration Shows the number of seconds after which calls will be disconnected.
Call/SMS Flags Shows any flags that have been set for sending and receiving SMS. The following are
possible:
RC Receive calls
RS Receive SMS
CoS Count only successful calls
Grp Send only to same group
Col Send only to same color
Special Service Flags Shows any flags that have been set for special services. The following are possible:
A After Assign
L On Change Limit Reached
D Daily between the defined times
E On Each Limit Ind. (PP)
Assign Offset Shows a random number of seconds between those defined in the Limits dialog (see
Chapter 8.6 ).
Table 8.11 vGATEDesktop Columns (continued)
Column Description
95
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 1 9 v G A T E D e s k t o p I C O N S
Table 8.12 lists the icons that appear on the vGATEDesktop and their meanings.
Used per TZ Lists how often the SIM has been assigned .
Upgrades/Week Lists how often a SIM has been recharged in the current week/how many recharges
per Week have been set.
Upgrades/Month Lists how often a SIM has been recharged in the current month/how many recharges
per month have been set.
Carrier Sub ID Lists the carrier’s sub identification. Default 1.
Route Priority Lists the priority set for calls over this SIM. Route priority is available in versions 14.6
or higher and is set between 1 and 10, with 10 being the highest priority (default 5).
NOTE: Route priority is only active if New Protocol has been set in the edit window.
Serial Number Lists serial numbers entered for SIMs using the Change Serial Number function in
the context menu. If no serial number has been entered, none will appear.
Known Since Shows when the SIM entered the system.
PPCount SLR Prepaid Count Since Last Recharge shows the number of 10-second units that have
been used since the last time the SIM was recharged. The counter is reset after the
SIM has been recharged.
Max Daily Duration Shows the number of minutes the SIM will be used on any given day before it is
blocked.
Table 8.12 vGATEDesktop Icons
Icon Definition
Groups
No errors exist on the mobile gateways in this group.
An error exists on at least one mobile gateway in the group.
A mobile gateway in this group is currently in maintenance mode. Select Reset Maintenance Mode
from the context menu to reactivate the group’s mobile gateway.
Table 8.11 vGATEDesktop Columns (continued)
Column Description
96
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
A light-blue line around the icon signifies that the groups has been defined as the default group.
Mobile Gateways
No errors exist on this mobile gateway.
This mobile gateway is not available.
This mobile gateway is currently in maintenance mode. Select Reset Maintenance Mode from the
context menu to reactivate the mobile gateway.
This mobile gateway has been improperly configured. Check the configuration and, if necessary, install
the proper driver for vGATE implementation.
Controllers
A SIM has been assigned to this port.
No SIM has been assigned to this port.
This port is in the process of carrying out an action.
This is a UMTS port from a iGATE 3G.
SIMs
This GSM SIM is currently assigned to a port.
This GSM SIM is not currently assigned to a port.
This GSM position is empty. No SIM is inserted.
A previously set pause is currently active on this GSM SIM or the value set for Maximum Usage per
TZ has been reached.
This SIM is a UMTS SIM. This icon also appears in all of the above colors, depending on the SIM’s sta-
tus.
This icon indicates a dual SIM. This icon also appears in all of the above colors, depending on the SIM’s
status. A gray U on the icon indicates that the SIM has been set to GSM, a gray G indicates it has been
set to UMTS. If neither the U nor the G are gray, the SIM has been set to automatic.
Table 8.12 vGATEDesktop Icons (continued)
Icon Definition
97
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 2 0 M E N U B A R
The following table describes the commands you can carry out from the vGATEDesktop menu bar:
Signifies a prepaid SIM that does not recharge automatically.
Signifies a prepaid SIM that recharges automatically.
Indicate SIMs that have been blocked. Only inactive SIMs can be blocked manually.
Indicates that the SIM has been decommissioned. Decommissioned SIMs will never be assigned again.
An assigned SIM will not automatically be released after reaching the decommission date.
Table 8.13 vGATEDesktop Menu Bar
Command Definition
File Menu
Exit Closes the vGATEDesktop.
View Menu
Timezones List Click here to open a list containing an overview of timezones for the selected
group.
Carrier List Click here to open and edit a list of carriers.
Prepaid Recharge List Click here to open and edit a table containing information about prepaid re-
charge numbers.
SMS Message List Click here to open and edit a table containing SMS messages sent by the sys-
tem.
SMS/Call Receiver Click here to open receiver groups and edit a table containing numbers that
are to receive calls and/or SMS.
Holidays List Click here to open the list of holidays set in the Holidays timezone.
Status Bar Click here to hide or display the status bar. The number of SIMs and SIM 60
Carriers is displayed in the middle of the status bar and the time and date of
the vGATE Control Unit is on the right.
Toolbar Click here to hide or display the toolbar.
Table 8.12 vGATEDesktop Icons (continued)
Icon Definition
98
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 2 1 v G A T E D e s k t o p T O O L B A R
The vGATEDesktop toolbar facilitates quick access to the following functions and information:
Split Click here for a resize cursor to adjust the size of the windows on the
vGATEDesktop.
Refresh Click here to update the information displayed.
SIMs not in SIM Unit Click here to call up a list of SIMs once in the vGATE SIM Unit that have been
removed. Right-click a SIM to Delete from Database.
SIMCarrier Status Calls up a window containing the status of the SIM 60 Carriers in the vGATE
SIM Unit.
Options Menu
Inhibit Modification of Time-
zones
Click here to lock timezones in their current position. The deactivate this op-
tion, click here again.
Save Maintenance Actions in
User Info...
Click here to open a dialog box where you can choose where to store the
maintenance information.
Help
About vGATEDesktop Click here to view version information for the vGATEDesktop and vGATECtrl
installed.
Table 8.14 vGATEDesktop Toolbar Buttons
Icon Function
Click here to open a list of all Timezones for the selected group.
Click here to open the list of holidays set for the Holiday Timezone.
Click here to call up a window containing the status of the SIM 60 Carriers in the vGATE SIM Unit.
Click here to open and edit the list of carriers.
Table 8.13 vGATEDesktop Menu Bar (continued)
Command Definition
99
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Click here to open and edit a table containing information about prepaid recharge numbers.
Click here to open and edit a list of SMS sent by the system.
Click here to open and edit a list of SIMs receiving SMS and calls.
Click here to open the GATE Manager. This button is active only when a mobile gateway is selected.
Click here to open a table containing information about the SIM route for the selected mobile gate-
way.
Click here to open a table containing information about the SIM route for the selected controller.
Click here to open a table containing information pertaining to the selected SIM’s configuration.
Click here to open a table containing information about the selected SIM’s implementation schedule.
Click here to open a table containing information on the selected SIM’s implementation history.
Click here to call up a record averaged statistics for the marked SIMs, controllers or mobile gateways,
depending on which of these icons you click.
Click here to open a table containing information on how much and when selected SIMs have been
used.
Click here to open a table containing information about when the selected SIMs were last released.
Table 8.14 vGATEDesktop Toolbar Buttons (continued)
Icon Function
100
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
8 . 2 2 C O N T E X T M E N U S
The following table describes the commands you can carry out with the context menus on the vGATEDesktop:
Click here to call up a table containing information on SIM’s released below a defined count.
Click here to call up a table containing information on SIM’s that have reached their defined change
limit.
Click here to call up a table containing information on SIM’s that have reached their defined maxi-
mum limit.
Click here to call up a table containing information on SIM errors that have occurred.
Click here to call up a table containing call statistics for the selected mobile gateway or group.
Click here to call up a line chart of call statistics for the selected mobile gateway or group.
Click here to refresh the vGATEDesktop.
Click here to view version information pertaining to the vGATEDesktop and vGATECtrl.
Table 8.15 vGATEDesktop Context Menus
Command Definition
Groups
Create Group Click here to add a new group and to set dynamic pauses.
Edit Group Click here to change the name or dynamic pauses for an existing group.
Delete Group Click here to delete a group.
Table 8.14 vGATEDesktop Toolbar Buttons (continued)
Icon Function
101
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Show Call Statistics Contains a record of the averaged statistics for all calls that have gone
through this group.
Show Call Chart Contains statistic charts for all calls that have gone through this group.
Copy Holidays to Group Opens a dialog into which you can select a group to which you can import
the holiday settings for the group marked. Activate the checkbox Delete
Destination to delete the current settings in the destination group. If this
checkbox is not active, the new settings will be added to the old ones.
Default Group For New GWs Click here to define the marked group as the default group. New gateways
will automatically be added to this group.
mobile gateways
Add New Click here to call up the edit window (cf. Chapter 8.15 on page 83 ). Use
the edit window to add a new mobile gateway. We recommend that you use
automatic mobile gateway registration to add new mobile gateways
(cf. Chapter 8.1 on page 33 ).
Delete Click here to remove a mobile gateway from the vGATE.
Edit Click here to call up the edit window (cf. Chapter 8.15 on page 83 ). Use
the edit window to change an existing mobile gateway.
Copy Timezone
Configuration to GW
Use the drop-down list box to select a mobile gateway and click OK. The tim-
ezone configuration for the marked mobile gateway will be copied into the
mobile gateway you select from the list.
Change Group Use the drop-down list box that appears to switch this mobile gateway to
another group.
Free SIMs of dead
iGate
When an interruption occurs in the connection between the vGATE Control
Unit and the mobile gateways, traffic continues but the SIMs are locked, so
that they don’t log onto another mobile gateway. Click here to allow other
mobile gateways access to these SIMs.
NOTE: Select this option only if you are sure that the SIM will not log on
twice, as SIMs registered with more than one mobile gateway can alert a
GSM carrier to block the SIM.
If you use this command, be sure to look for and eliminate the problem that
caused the interruption.
Set Maintenance Mode Causes the mobile gateway to release all of its SIMs immediately. All calls
will be torn down. If you have activated Save Maintenance Actions in
User Info in the mobile gateway’s Options menu, a dialog will appear
where you can edit the information that will appear in the defined user info
column every time maintenance mode is set or reset.
Table 8.15 vGATEDesktop Context Menus (continued)
Command Definition
102
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Reset Maintenance Mode Reconnects the SIMs released when Set Maintenance Mode was select-
ed. If you have activated Save Maintenance Actions in User Info in the
mobile gateway’s Options menu, a dialog will appear where you can edit
the information that will appear in the defined user info column every time
maintenance mode is set or reset.
Reinit Initiates a check of the mobile gateway’s status against the database. Incon-
sistencies will correct themselves automatically. Wherever possible, SIMs will
be assigned to empty controllers.
Start Remote Opens GATE Manager for remote access. A folder with the name Remote is
automatically created in the vGateControl directory the first time you start
GATE Manager. Sub-folders for each mobile gateway selected will also be
created automatically.
Show Gateway History Calls up a table containing an overview of the gateway’s status changes. The
following status information is possible:
gateway stopped: the mobile gateway can no longer be accessed
from the vGate
gateway running: the mobile gateway is accessible again
set maintenance: the mobile gateway is in maintenance mode
reset maintenance: the mobile gateway is no longer in maintenance
mode.
The info column displays the details of each status.
Once a week, the information that is older than a week is automatically re-
moved from this table and written into the GW_History_YYYYMM_Week.txt
file. This file is then stored in the vGate’s logfiles folder.
Show SIM Route Calls up a table containing an overview of reserved positions. Right-click to
refresh the window.
Show SIM Statistics Contains a record of the averaged statistics for all SIMs used by this mobile
gateway.
Show Call Statistics Contains a record of the averaged statistics for all calls that have gone
through this mobile gateway.
Show Call Charts Contains statistic charts for all calls that have gone through this mobile gate-
way.
Table 8.15 vGATEDesktop Context Menus (continued)
Command Definition
103
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Default Configuration For New
GWs
Select this option to use the configuration for this mobile gateway as the de-
fault configuration for all new gateways. The following configuration set-
tings apply:
Use Remote Tunnel
Always Use Local SIM Unit Address
Remote Access
Use FTP for File Transfer
Remote State Actions
Occurrence Before Reassign SIM
Get Files (Get CDR, Failed Log)
Controllers
Release SIM Click here or press Ctrl+R to deactivate a SIM.
Release SIM and Block The SIM will be released and the controller will be blocked.
Release SIM
Immediately
Click here or press Ctrl+I to release the SIM immediately, even if traffic is
running on it.
Release SIM
Immediately and Block
The SIM will be released immediately, even if traffic is running on it, and the
controller will be blocked.
Assign SIM Click here or press Ctrl+A to activate a reserved SIM. If multiple SIMs are re-
served, the one that has the highest assign priority will be activated. If no
assign priority has been set, or if SIM’s share the same assign priority, the
SIM that has the highest route priority will be used. Route priority is available
in versions 14.6 or higher and is set between 1 and 10, with 10 being the
highest priority (default 5).
NOTE: Route priority is only active if New Protocol has been set in the edit
window.
Reassign SIM Click here or press Ctrl+S to release and reassign the SIM or SIMs. This is
useful when an active SIMs parameters (e.g. limits) have been changed.
Stop Recharging Click here to cancel the recharge process running.
Stop Assigning Click here to interrupt the assign phase for the marked controller(s). This is
useful when a SIM has been assigned to two controllers simultaneously,
blocking one controller. This function will unblock the controller.
Start Special Service Opens a browser to allow manual selection of special service (see Chapter
8.12).
Stop Special Service Special service is stopped and the SIM is released.
Table 8.15 vGATEDesktop Context Menus (continued)
Command Definition
104
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Edit Advanced Limit Choice Click here to open a dialog where you can define which SIM limits will be
assigned to this controller. Set Preferred to use SIMs with different limits if
the set limits are not available. Set Mandatory if only SIMs with the defined
limits are to be used. Major refers to max limits and limits A, B, and C are
advanced limits. Bear in mind that no prepaid SIMs will be assigned to con-
trollers where Mandatory has been set here. Postpaid SIMs will be as-
signed only if Use Limits One By One is active in the Carrier List Advanced
Limit Charges.
Edit CTRL Info Click here to edit the information that appears in the CTRL Info column.
Edit SIM Linkage Click here to call up a dialog from which you can add or delete individual
SIMs from their reserved Limit 1 and/or Limit 2 positions.
Remove SIM Linkage Use the submenu to remove SIMs from All, Limit 1 or Limit 2 reserved po-
sitions on the marked controller(s). SIMs that are currently active cannot be
removed.
Reset Error/Unblock CTRL Click here to remove error entries from and unblock this controller. After the
message has been removed, the SIM can be reassigned.
Show SIM Route Calls up a table containing an overview of reserved positions. Right-click to
refresh the window.
Show SIM Statistics Contains a record of the averaged statistics for SIMs that have been active
at this controller.
Show Call Statistics Contains a record of the averaged statistics for all calls that have gone
through this controller.
SIMs
Change Limits Click here or press Ctrl+L to call up a dialog that allows you to set and
change a SIM’s settings, such as limits and pauses. Bear in mind that you
must reassign the SIM after you change a SIM’s limit (see Chapter 8.6 on
page 8-41).
Table 8.15 vGATEDesktop Context Menus (continued)
Command Definition
105
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Change Priority Calls up a drop-down list box from which you can define the SIM’s Assign
Priority and Route Priority. If multiple SIMs are reserved, the one that has
the highest assign priority will be activated. If no assign priority has been set,
or if SIM’s share the same assign priority, the SIM that has been idle longest
will be used.
Route priority sets a priority for calls over the SIM. The assigned SIM with the
highest route priority will be used to terminate calls. Route priority is avail-
able in versions 14.6 or higher and is set between 1 and 10, with 10 being
the highest priority (default 5).
NOTE: New Protocol must be active in the edit window.
Change SIM Options Calls up a dialog in which you can enter and edit the number of SMS or calls
sent per month, information that will appear in the Info 1 and Info 2 and
the SIMs own number. Special services can also be activated here.
Change Color in Sim Route View Click here to call up a color palette, from which you can color-code SIMs, e.g.
by carrier. The color selected appears in the Color column, the Active Po-
sition column of the controller window and in the SIM Route window.
Change Serial Number Click here to enter or change a SIM’s serial number. The number will appear
in the Serial Number column.
Define as Prepaid SIM Click here to designate a SIM as prepaid.
Change PIN All PINs in the vGATE are set at 0000. If a SIM has a different PIN, select this
option to change the PIN to 0000. This option is active only when the select-
ed SIM’s PIN is not set at 0000.
Edit User Registration Data Click here to open a dialog into which you can enter user registration for the
selected SIM.
Table 8.15 vGATEDesktop Context Menus (continued)
Command Definition
106
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Add SIM(s) The following options are possible:
Add to Selected Ctrls: Click here or press Ctrl+A to assign the marked
SIMs to the selected controllers
Add Balanced to Ctrls: Click here or press Ctrl+B to reserve the
marked SIMs individually to consecutive controllers, beginning with the
selected controller.
Add Color to Selected Ctrls: Click here or press Ctrl+Alt+A to reserve
all SIMs in this color to the selected controllers. The SIM that has been
idle longest will be used first. Only one color can be reserved at a time to
each controller for each Limit (1 or 2). If you reserve a new color where
one already exists, the old color setting will be deleted. Color-based rout-
ing and position-based routing may not be used simultaneously.
Reserve SIM Like: Click here to call up a dialog where you can enter a
SIM number. The marked SIM will then adopt the same reservation prop-
erties as the SIM you enter. Check Limit 1 and/or Limit 2 and the marked
SIM will also adopt the entered SIM’s limits.
Remove SIM(s) The following options are possible:
Remove SIM(s) from all Routes: All selected SIM(s) will be removed
from their Reserved Positions. Active SIM(s) and color routings will
not be removed.
Remove SIM Color Group from All Routes: All SIM(s) in the select-
ed color group will be removed from their Reserved Positions. Active
SIM(s) will not be removed.
Remove SIM(s) from Currently Edited TZ: Click here to remove all
SIM(s) from the Timezone you are currently editing. Active SIM(s) will not
be removed.
Remove SIM Color Group from Currently Edited TZ: Click here to
remove all SIM(s) in the selected color group from the Timezone you are
currently editing. Active SIM(s) will not be removed.
Table 8.15 vGATEDesktop Context Menus (continued)
Command Definition
107
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Color Template The following options are possible:
Apply Template Settings To Selected SIM: The individual color
template settings will by applied to all selected SIMs.
Apply Template Settings To All SIMs With Current Color:
The template settings will be applied to all SIMs with the same color
as the SIM marked.
Save Settings as Template For Current Color: The settings for
the marked SIM will be saved as the template for that color.
A will appear in the Status column of any SIMs to which the color tem-
plate settings have been applied.
The color template applies for the following settings:
Maximum Call Duration
Maximum Call Duration Per Day
Minimum Remaining
Maximum Calls Per Day
Minimum Pause after Last Use
Active Release:
– Calls After Assign
– SMS After Assign
– Incoming Calls
– Call Attempts
Delay SIM Assignment on TZ Change
Reset Maintenance
Boot Indication
Block SIM On Low ACD
Use SIM on Alternating Gateways
SIM Opeions Dialog:
– Call/SMS generation parameters
– Special Services parameters
Priority:
– Assign Priority
– Route Priority
Table 8.15 vGATEDesktop Context Menus (continued)
Command Definition
108
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Reset The following options are possible:
Reset Count: Resets the Count column at 0.
Reset Limits: Click here to reset Max. Limits manually to their config-
ured maximum limit.
Reset Daily Call Duration: Click here to reset the Daily Call Dura-
tion counter manually to its configured value.
Reset Daily Calls: Click here to reset the Daily Call counter manually
to its configured value.
Reset Error/Unblock SIM: Click here to remove error entries from or
unblock this SIM. After the message has been removed, the SIM can be
reassigned.
Reset TZ Change Counter: Resets the Timezone counter (see
Chapter 8.6 : Maximum Usage per TZ).
Reset Recharge Counter: Click here to reset the number of recharges
used in this month to zero.
Reset Prepaid Block: Click here to reset SIMs that have been blocked
as a result of mistakes during the recharge procedure.
Reset Info Flag and User Info: Click here to clear the text from the
Info 1 or Info 2 field.
Reset Info Flag and Error String: Click here to clear the Error field.
Set Last Special Service Runtime: Click here to manipulate the spe-
cial service runtime.
Reset Last Special Service Runtime: Click here to rerun a script on
a new SIM the next time it is assigned.
Block SIM Click here to manually block this SIM. Only inactive SIMs can be blocked
manually.
Stop Pause Deactivates Minimum Pause after Last Use one time. The pause will be
reactivated following the next release.
Select CTRL Marks the controller where the selected SIM is currently active.
Select Last Used Prepaid Re-
charge Number
Click here to select the prepaid recharge number that was used last.
NOTE: This feature applies only for auto-recharge SIMs.
Show SIM Route Calls up a table containing an overview of reserved positions. Right-click to
refresh the window.
Table 8.15 vGATEDesktop Context Menus (continued)
Command Definition
109
vGATE 16.1. Revised: 2 March 2011.
v G A T E D e s k t o p
C H A P T E R 8
Reports Use the submenu to call up one of the following tables:
Sim History: contains information about the activity of the selected SIM
(see Chapter 8.16 on page 8-87).
SIM Usage: contains a record of the SIM’s assignment.
SIM Statistics: contains a record of the SIM’s averaged statistics.
SIM Statistics of SIM Color Group: contains a record of averaged
statistics for SIMs in the same color group.
Last Released: contains information about when the SIM was last re-
leased.
Released with Count Below: contains a record of SIMs released be-
low a defined count within a defined number of days. Check Report
SIMs only once per day and each SIM will be entered only once on
any given day.
Change Limit Reached: contains a record of SIMs released after a limit
was reached. Use the drop-down menu to select the number of days the
report contains.
Maximum Limit Reached: contains a record of SIMs permanently re-
moved from traffic after their maximum limit was reached. Use the drop-
down menu to select the number of days the report contains.
SIM Errors: contains a record of errors occurring on the SIM. Use the
drop-down menu to select the number of days the report contains.
All reports can be exported and saved to a .txt, .xls or .slk files.
SIM Information Click here to call up a table containing all of the information pertaining to
the SIM’s vGATE configuration.
Incoming Messages... Click here to open a browser which shows all messages that have been re-
ceived for the selected SIM card and the current day. Make sure that Save
Incoming SMS/USSD in Database is checked in the vGATECtrl’s Op-
tions menu.
Export to File Click here to open a browser into which you can save a text file containing
the current status of all SIMs. Any filters set will apply.
Export User Registration to File Click here to open a browser into which you can save a text file containing
the SIM’s user registration.
Import User Registration from
File
Click here to open a browser from which you can select a text file to implort
the SIM’s user registration.
Table 8.15 vGATEDesktop Context Menus (continued)
Command Definition
110
vGATE 16.1. Revised: 2 March 2011.
v G A T E C t r l
C H A P T E R 9
9 v G AT E C t r l
The vGATECtrl application is the vGATE Control Unit’s background server. You can use it to record and display a
log of activity, send email error messages, and to perform a variety of functions on vGATE connections. Open the
vGATECtrl by double-clicking the button in the bottom right-hand corner of the taskbar.
9 . 1 L O G G I N G A C T I V I T Y
The current logs describing all activity at the vGATE Control Unit are shown on the screen. All entries are written
to the log file, which is generated every day at midnight. This file is saved in the logfiles folder in the vGATECtrl
directory.
You must select Exit from the File menu or from the context menu in the taskbar to close vGATECtrl. Using the Windows Task Manager to close vGATECtrl can cause da-tabase failure!
Figure 9.1 vGATECtrl
ii
111
vGATE 16.1. Revised: 2 March 2011.
v G A T E C t r l
C H A P T E R 9
9 . 2 S E N D I N G E R R O R M E S S A G E S V I A E - M A I L
To send error messages via e-mail, select Mail Settings from
the Options menu. In the pop-up dialog, activate Send Mail
and enter the recipient’s e-mail address, the SMTP Server
and the name of the sender in SMTP Originator. To secure
access to the mail server, activate Logon and enter a User-
name and Password. Activate Base64 Encoding to encode
logon. Check one or more of the Filters to select the errors for
which messages are to be sent.
9 . 3 TE A R I N G D O W N C O N N E C T I O N S
To tear down all connections to the vGATE, select Exit from the File menu or right-click the vGATECtrl icon on the
right-hand side of the taskbar. The SIMs will disconnect as soon as any calls are terminated. If you select Exit Im-
mediately, all SIMs disconnect immediately, regardless of whether or not a call is in progress.
We do not recommend that you use the command Exit without releasing SIMs.
Figure 9.2 Mail Settings
ii
112
vGATE 16.1. Revised: 2 March 2011.
v G A T E C t r l
C H A P T E R 9
9 . 4 O P T I O N S
The Options menu allows you to perform a variety of tasks in regard to connections on the vGATE:
Table 9.1 vGATECtrl Options
Command Description
Check SIM Status The vGATE SIM Unit’s SIM status is checked automatically every three minutes.
Remove Controller Warn-
ings
Calls up a dialog where you can enter a number of minutes between 10 and 3600.
Warning messages will remain on the vGATEDesktop for the number of minutes
entered. Check Never if you would like error messages to remain indefinitely (de-
fault). Activate Also Remove Errors to include major and minor error messages.
Export SIM Settings Exports the SIM settings and their current status to a text file.
Disconnect all Desktops All remote vGATEDesktops will shut down.
Log Settings Allows you to select what kind of log entries you would like. Default settings are
Error and Debug. Select Detail to receive detailed entries.
Mail Settings Allows you to send error messages via e-mail (see Chapter 9.2 ).
Script File Settings Allows you to select and run an API script. For details on API scripts and a complete
list of all API scripting commands, please refer to the vGATE API manual.
Call/SMS Generation
Settings
Allows you to set a Preferred Timeframe when you want to send calls/SMS and/
or/ a Forbidden Timeframe, in which you don’t want to send them. You can also
set a maximum number of calls or SMS that can be sent simultaneously from the
system. Enter the maximum number in the dialog that appears or check No limit
if you do not want to set a limit. To set different limits for individual iGATEs, see
Chapter 8.15 . The setting in vGATECtrl will take priority over limits set for any
individual iGATEs.
Automatically Delete
SIMs Not in SIMUnit
Allows you to determine when SIMs that are no longer in the SIMunit can be de-
leted from the database.
Additional SIM Search
Strategy
Use this option to define one or two search strategies which the vGATECtrl uses to assign
a SIM card to a controller. Allows you to Prefer Prepaid SIMs with No Limit, Prefer
SIMs with Highest Maximum Limit, or Prefer SIMs with Lowest Count. Set the first
flag to use a prepaid SIM card with no limit whenever it is available. If you set the second
flag, the assigned SIM card with the highest maximum limit will be used whenever it is
available. If you set the third flag, the SIM card with the lowest count will be used whenever
it is available. You can combine the first with the second or the first with the third option.
In such a combination, Prefer Prepaid SIMs with No Limit always has the highest pri-
ority.
113
vGATE 16.1. Revised: 2 March 2011.
v G A T E C t r l
C H A P T E R 9
Active SIM Release When this option has been set and Active Release is checked in the Limits dia-
log of the vGATEDesktop, the active SIMs will be released when the number of min-
utes entered in the Limits dialog of the vGATEDesktop has passed.
(cf. Chapter 8.6 on page 41 ).
Release All SIMs if
Timezone Changes
Click here for all SIMs to be released at the beginning of a new timezone. The next
reserved SIM will be activated or the released SIM will be immediately reactivated
if there are no other SIMs reserved.
Reset SIM Counter Daily The limit 1 and limit 2 counters will be reset at zero every day at midnight. The
vGATEDesktop Count (L1) Yesterday and Count (L2) Yesterday columns will
show the Max Limit 1 or Max Limit 2 units used on the previous day.
Initially Block New SIMs New SIMs that are inserted in the vGATE SIM Unit will be blocked following initial-
ization.
Suppress Quality
Indications
The Received Signal Strength Indication (RSSI) status will not be sent to the vGATE.
Bear in mind that that New Protocol must be set in the mobile gateway’s edit
window for this feature to work.
Reset Gateway Port
Statistic on SIM Change
New statistics will be logged for a controller when a new SIM is assigned. Old sta-
tistics for the previous SIM are sent to the vGATE.
Use vGATEWatch Sets the watchdog function. If vGATECtrl or the MySQL database shut down im-
properly, they will automatically restart following one minute.
Send External SMS vGATECtrl will check once a minute whether you have entered external SMS to
send. If you do not wish to send external SMS, deactivate this function.
Use Change Limit For Pre-
paid SIMs
The change limit is applied to prepaid SIMs. You must restart the vGATEDesktop to
activate the feature.
Use External Recharge This feature will be available in a future version.
Save Incoming SMS/USSD
in Database
Incoming SMS and USSD messages will be saved in the database.
Save CDR/Failed Log File
in Database
CDR and filed log files will be saved in the database.
If you are using a dial-up connection, wait at least twenty seconds following your last command before you disconnect.
Table 9.1 vGATECtrl Options
Command Description
ii
114
vGATE 16.1. Revised: 2 March 2011.
V G A T E W A T C H
C H A P T E R 1 0
115
vGATE 16.1. Revised: 2 March 2011.
1 0 V G AT E WA T C H
Figure 10.1 vGATEWatch
The vGATEWatch is a watchdog function that causes vGATECtrl, the MySQL database, iMNP, and/or the
vGATERoutingManager to restart if they shut down improperly. To activate vGATEWatch, select Use vGATEWatch
from the Options menu in the vGATECtrl application (default setting). Now vGATEWatch will start up automati-
cally when vGATECtrl starts up, and the icon will appear in the taskbar’s right-hand corner.
If you select Stop Watching from the context menu, the icon will appear in the taskbar and the watchdog
function will shut down. Click Restart Watching to restart the function.
Double-click the icon or select Restore from its context menu to open vGATEWatch. From the Options menu, you
can turn sound on or off, so that an alarm sounds when vGATECtrl or MySQL shuts down. Select which application
you want to watch. Select Reboot if Database Not Running and the computer will restart whenever this ap-
plication shuts down. Finally, select Set MySQL Service Name ... to enter the service name of your MySQL da-
tabase.
A P P E N D I X
C H A P T E R 1 1
1 1 A P P E N D I X
1 1 . 1 S T A R T I N G T H E W I N D O W S 2 0 0 3 C O N T R O L U N I T W I T H O U T L O G O N
To start up the Windows2003 Control Unit without logging on, for example in the case of power failure, click the
RegTool AutoLogon.reg.
Bear in mind that if the user name: simdbuser and password: simdb have been changed, you must also
change AutoLogon.reg accordingly.
ClearAutoLog.reg deactivates startup without logon.
1 1 . 2 R E M O T E A C C E S S T O T H E v G A T E C O N T R O L U N I T
To install a remote client, simply start the versions setup program and select Remote in the Setup Type dialog.
You will find the program on the vGATE Control Unit: E:\vGate_Version.
The following programs are required for remote access to the vGATE Control Unit:
vGATEDesktop.exe
vGateConfigRemote.exe
libmySQL.dll
Configuration for remote access
The configuration tool vGateConfigRemote is used
to configure the vGATE for remote access.
Use the desktop shortcut to start the program
vGateConfigRemote.exe. Answer all queries
with OK.
In the Database section, leave the default Name
as is. Enter the vGATE Control Unit’s IP address in
the Host space. Do not change the default Port.
Enter the User name simdbuser and the Pass-
word simdb.
In the Frontend Server section, enter the vGATE
Control Unit’s IP address again in the Host space
and do not change the Port. Click Apply or OK.
The remote PC must be connected to the vGATE Control Unit with an Ethernet con-nection of at least 10 MB.ii
Figure 11.1 Configuration for Remote Access
116
vGATE 16.1. Revised: 2 March 2011.
A P P E N D I X
C H A P T E R 1 1
You can now open the vGATEDesktop for remote access to the vGATE Control Unit. Enter the password configured
or check Read Only and enter the password configured for read-only access if one has been set (see
Chapter 7.3 ).
1 1 . 3 U P D A T I N G T H E S I M S E R V E R D B D A T A B A S E
To update the database SimServerDB, you must first close the programs vGATECtrl.exe and
vGateDesktop.exe.
The following instructions update Version 15.0.0 to 16.1.0. If you are updating to or from another version, enter
the relevant version numbers in the appropriate places.
Start the MSDOS command prompt at Start | Programs | Accessories | Command Prompt.
Enter D: and press Return.
Enter cd mysql\bin and press Return.
Enter mysql -u simdbuser -p and press Return.
Enter the password simdb and press Return.
Bear in mind that only one vGATEDesktop can be open at a time, regardless of its location.
vGATE Version 16.1 is compatible only with MySQL Version 5.1.43. Check your MySQL version before updating the vGATE. If you have an older version, we recommend up-dating to MySQL Version 5.1. If you have trouble, please contact TELES service for your update.
Following installation of vGATE Version 16.1, TELES must release it for your use with a key generator. Otherwise you will not be able to start your vGATE.
ii
ii
117
vGATE 16.1. Revised: 2 March 2011.
A P P E N D I X
C H A P T E R 1 1
Enter the command \. (backslash period space) and the path to the script (in this example, on the E: drive):
\. E:\vGATE_Version\V16.1\Disk1\DatabaseScripts\DIFF_V1500_V1610.sql.
Press the Return key.
Enter exit to exit mysql.
Restart the MySQL service by going to Start | Programs | Administrative Tools | Services, selecting
the MySQL service from the list of services, right-clicking on it, and selecting Restart.
Uninstall the old version.
Start the setup.exe from the folder E:\vGATE_Version\V16.1\Disk1.
Select Install.
Click Next when the TELES logo appears.
When the setup wizard opens, click Next.
To select an installation folder, click Browse and choose D:\vGATEControl.
Click Next.
The default setup type is Control Unit.
Click Next.
Click Next again to confirm installation.
Click Close when installation is complete.
Open and confirm all queries with Yes. Enter the Pipe Name: MYSQL.
If necessary, reenter any settings in the shortcuts’ Properties.
You can now start vGATECtrl.exe and vGATEDesktop.exe.
Figure 11.2 Updating the MySWQL Database Version 15.0.0 to 16.1.0
118
vGATE 16.1. Revised: 2 March 2011.
A P P E N D I X
C H A P T E R 1 1
1 1 . 4 C R E A T I N G A B A C K U P O F T H E D A T A B A S E
To secure your database, we strongly recommend that you create a backup.
To create a backup of the database, execute the batch file SimBD-Dump.bat, which you will find in the folder
E:\Backup-Database . The file simdbdump.sql will be created and saved in the folder E:\Backup-Database.
To restore the database with the backup file, please contact TELES service.
1 1 . 5 TR O U B L E S H O O T I N G
Table 11.1 contains a list of problems you may incur and how to solve them.
Table 11.1 Troubleshooting
Error Cause Solution vGATEDesktop
Status
Missing IMSI SIM card is missing or
defective.
Dust or contact prob-
lems on the SIM or in
the SIM 60 Carrier.
Insert another SIM card at
this position.
Clean the contacts on the
SIM and the SIM 60 Carri-
er with alcohol.
SIM card line is red.
SIM Broken Registration process
failed repeatedly.
TCP/IP connection
from the iGATE to the
vGATE SIM Unit is in-
adequate or unavail-
able.
Check the TCP/IP connec-
tion between the iGATE
and the vGATE SIM Unit.
SIM card and controller
lines are red. Entry in the
controller line’s Remote
State column.
SIM Blocked GSM network is over-
loaded.
Missing TCP/IP con-
nection to the vGATE
SIM Unit.
SIM card has been
blocked.
Replace the SIM card after
the third failed registra-
tion attempt.
SIM card and controller
lines are red. Entry in the
controller line’s Remote
State column.
Ping Timeout Missing TCP/IP con-
nection to the iGATE.
Check the TCP/IP connec-
tion between the vGATE
Control Unit and the
iGATE.
Group and iGATE lines
are red.
119
vGATE 16.1. Revised: 2 March 2011.
A P P E N D I X
C H A P T E R 1 1
Connection refused iGATE cannot be
reached.
Check the TCP/IP connec-
tion.
Check the status of the
iGATE.
Group and iGATE lines
are red.
Improperly config-
ured
Missing vGATE driver
on the iGATE.
Check the iGATE’s vGATE
driver.
Group and iGATE lines
are red.
SIM 60 Carrier not
recognized by vGATE
SIM Unit
Hardware or software
failure on the vGATE
Module.
Inform TELES NetService. SIM positions do not ap-
pear in the SIM window
of the vGATEDesktop.
SIM barred Registration process
unsuccessful.
SIM card is blocked.
Restart the corresponding
mobile port manually.
Check the TCP/IP connec-
tion between the iGATE
and the vGATE SIM Unit.
Replace the SIM card.
Check vGATE configura-
tion in the iGATE.
Entry in the controller
line’s Remote State col-
umn.
Wrong PIN SIM’s PIN is incorrect
or different from that
of the other SIMs.
Change the PIN. All SIM
cards in the vGATE must
have the same PIN.
Reassign the SIM card.
Entry in the controller
line’s Remote State col-
umn.
CTRL incorrectly con-
figured
Controller has not
been defined as pre-
paid.
Assign SIM to a correctly
configured controller or
configure controller as
prepaid.
Entry in the controller
line’s Error column and
controller line appears in
red.
No recharge number
found
Recharge number
missing from recharge
list.
Enter a recharge number
in the list.
SIM line highlighted in
yellow and entry appears
in the Error column.
Sending recharge
call (OK), no answer,
no limit indication
after 2 minutes.
Carrier does not re-
spond to recharge call
within 2 minutes.
Wrong recharge num-
ber.
Try again with the same
SIM.
SIM line highlighted in
yellow and entry appears
in the Error column.
Job timeout during
wait.
Scripting error.
No answer to USSD
query.
Check script for mistakes.
Try again.
SIM line highlighted in
red and entry appears in
the Error column.
Table 11.1 Troubleshooting (continued)
Error Cause Solution vGATEDesktop
Status
120
vGATE 16.1. Revised: 2 March 2011.
A P P E N D I X
C H A P T E R 1 1
1 1 . 6 S U P P O R T E D M O B I L E G A T E W A Y S
Table 11.2 contains information about the gateways supported by the vGATE and their compatibility requirements.
A vGATE license is required for each mobile gateway.
Table 11.2 Supported mobile gateways
Hardware vGATE License As of Version
iGATE 4 VoIP SIM 14.6
iGATE 8 VoIP SIM 14.6
iGATE 16 VoIP SIM 14.6
iGATE 32 VoIP SIM 14.6
ECOTEL GSM SIM 14.6
ECOTEL 3G SIM 14.6
121
vGATE 16.1. Revised: 2 March 2011.
TELES AG InformationstechnologienErnst-Reuter-Platz 810587 Berlin, GermanyPhone: +49 30 399 28-066Fax: +49 30 399 28-051E-mail: [email protected]
http://www.teles.com/