vintner series wine racks quick fit guide · vintner series wine racks rack to room measurement and...
TRANSCRIPT
6 footstack3’ and
3’
7 footstack4’ and
3’
8 footstack4’ and
4’
9 footstack
3,3 and 3’
10 footstack
4, 3 and 3’
To finish the look you can add moldings to the racks. We have two base sizes, a center trim, and several
crown options.
To utilize the full height of your cellar stack the appropriate kits.
Vintner Series Wine Racks Rack to Room Measurement and
Quick Fit Guide
Sample Wall Layout Using Stacked 4 Ft Racks
*Sample overhead view
* Sample straight on elevation view
Supply us with your room dimensions & our design staff can customize a plan like this for you with any of our wine rack series - FREE OF CHARGE.
Quick Sample Room Overview and Rack Specs Guide
How To Measure For Corners Utilizing a 90 Degree Angle
How To Measure For Corners Utilizing Our Curved Corner Racks
How To Begin1. Subtract your corner racks from youroverall wall lengths to establish how much space you have remaining.
2. Fill in the remaining space availablewith your choice of racking selections. For your convenience we have a short list of each rack's width listed above, as well as all the individual rack elevations on all the following pages, which are measured to scale for your convenience.
3. Remember we offer matching fillermaterial to allow you to fill in any misc. gaps you may have left over.
Supply us with your room dimensions & our design staff can customize a plan like this for you with any of our wine rack series - FREE OF CHARGE.
3 Foot Wine Racks
1 COL 2 COL 3 COL 4 COL 5 COL 10 COL MAGNUM SDC INDDIA
1 COLDS 2 COLDS 3 COLDS 4 COLDS 5 COLDS 10 COLDS RECT1 RECT 3
ODC OVD ODIAM DIAM QTR CURVE CURVEDS
Scale 1/4"=1'
4 Foot Wine Racks
1 COL 2 COL 3 COL 4 COL 5 COL 10 COL MAGNUM SDC INDDIA
1 COLDS 2 COLDS 3 COLDS 4 COLDS 5 COLDS 10 COLDS RECT1 RECT 3
ODC OVD ODIAM DIAM QTR CURVE CURVEDS
Scale 1/4"=1'
Tasting Center Using 4' and 3' Kits
INDGTDSRBWC INDGTDSRBWCwith ARCH insert wih Glass Rack Insert
INDGTODBwith ARCH Insert
INDGTODBwith Glass Rack Insert
INDGTRBWCwith ARCH insertwith ARCH insert
with ARCH insert with ARCH insert
with Glass Rack Insert with Glass Rack Insert
with Glass Rack Insert with Glass Rack Insert
INDGTRBWC
INDGTDSODB INDGTDSODB
INDGT INDGT
INDGTDS INDGTDS
Scale 1/4"=1'
* Please note that the archways, table tops, and glass racks are all sold as separate insert options.
Tasting Centers Using 4' and 4' KitsScale 1/4"=1'
* Please note that the archways, table tops, and glass racks are all sold as separate insert options.
Scale 1/4"=1'
Waterfall Racks
Finishing Options
WATER3(R) WATER3(L)
WATER2(R) WATER2(L)
WATER1(R) WATER1(L)
GRTT *Tabletop
ARCH
*Please note Tabletop comes standard with both the Glass Rack and the Archway packages