1922 GE AOU Fan Power cord ReplacementReplace the power cord on a 1922 GE AOU fan.

Written By: Elias Dorna

1922 GE AOU Fan Power cord Replacement Draft: 2019-08-09Guide ID: 64228 -

This document was generated on 2019-11-04 10:33:02 PM (MST).

© iFixit — CC BY-NC-SA de.iFixit.com Page 1 of 5

INTRODUCTION

Use this guide to replace the power cord on a 1922 GE AOU fan.

TOOLS:Flathead Screwdriver (1)

PARTS:Cloth Wire Power Cord (1)

1922 GE AOU Fan Power cord Replacement Draft: 2019-08-09Guide ID: 64228 -

This document was generated on 2019-11-04 10:33:02 PM (MST).

© iFixit — CC BY-NC-SA de.iFixit.com Page 2 of 5

Schritt 1 — Power cord

Tip the fan to its side and remove the three size 8 screws using a 9/32 flat-head screwdriver.

The screws may be brittle from age, so be careful.

Take the bottom plate off the fan and set it aside.

Schritt 2

Remove the three number 8 screwsthat hold the switch in place.

1922 GE AOU Fan Power cord Replacement Draft: 2019-08-09Guide ID: 64228 -

This document was generated on 2019-11-04 10:33:02 PM (MST).

© iFixit — CC BY-NC-SA de.iFixit.com Page 3 of 5

Schritt 3

Remove the switch, carefully slidingthe speed lever out of its slot.

Don't remove the switch too quicklyor you can damage the head-wire.

Schritt 4

Once the switch is free, unscrew thetwo knurled nuts holding the wires inplace.

1922 GE AOU Fan Power cord Replacement Draft: 2019-08-09Guide ID: 64228 -

This document was generated on 2019-11-04 10:33:02 PM (MST).

© iFixit — CC BY-NC-SA de.iFixit.com Page 4 of 5

To reassemble your device, follow these instructions in reverse order.

Schritt 5

Turn the switch over and unscrewthe nut securing the wire with the5/16 crescent wrench.

Schritt 6

Remove the switch and set it aside,then pull the wire through thegrommet.

1922 GE AOU Fan Power cord Replacement Draft: 2019-08-09Guide ID: 64228 -

This document was generated on 2019-11-04 10:33:02 PM (MST).

© iFixit — CC BY-NC-SA de.iFixit.com Page 5 of 5