Summary

As this lamp is supposed to be a purely Swedish design, "Svensk veckadlampa" sound like a good name. More important, you do not need amulti-material printer in order to print this item as it is only a singlecolor change for the lamp shade, and for the lamp base as well! So, eventhough I set up the .3mf files for mmu prints, you can easily change thesettings, just add a pause (that you can do within the slicer) at a certainheight (see the printing instructions) and off you go!

This lamp was designed using blender, freecad-daily, gimp and inkscape. Ifyou would like to see my other designs, just search for "frimmel" at https://www.thingiverse.com. Please be aware that my designs are generally CCnon-profit. Please respect this decision.

Before you print this lamp, be sure to actually read the printinginstructions.

Household > Living room

twocolor transparent swedish singleextruder prusai3mk3

mmu2s mmu mk3s light lampshade lamp inkscape

home gimp freecad desk design color blender

F Frimmel

Svensk veckadlampa

VIEW IN BROWSER

updated 11. 9. 2020 | published 11. 9. 2020

3D M

ODEL

ONLY

The various parts in brief

The lamp base consists of no less than 12 parts (4 legs, 4 feet, lower base,leg, lamp socket holder, lamp socket holder top). You can print all of theparts in a single color, or use variation if you prefer. The .3mf files are setup so you can easily print the parts using 2 colors (the scheme I prefer).Wood fills seem to always be a good choice when it comes to printing lampbases :-)

Considerations you might have should include not the least to add a brimfor some parts, and to change the layer heights (I use 0.3mm for the entirebase as wood fills are quite forgiving).

I have generally used Filament-PMs transparent PETG for the lamp shades,swapping the colors between each print to give some variation to thelamp. Of course, you could use any brand, eg Fillamentums CPE-HG100 orPrusament will do just fine (BTW the PETG sold by prusa that is not"Prusament" is actually from Filament-PM).

For the "top surface" (the upper shade holer part), I used Filament-PMs"Froggy Gold" (sort of semi-transparent). to give the lamp an additionaltwist.

The lamp shades are preferrably printed in two colors in order to givedepth to the construction. If using a single material printer, a singlematerial change (at Z=1.4mm) is necessary if you want the 2-color print.

Parts to print

Lamp base (2 materials, print time 3 hours + 2.5 hours + 1 hour)

I suggest using two materials, here named A, B for convenience.

lamphållare_låsdel_benX4_xy0.4mm_z0.3mm_WoodFILL.3mf *** usematerial A

michelinpelare_tassarX4_xy0.4mm_z0.3mm_EasyWoodFILL.3mf *** usematerial B

For the lower base, choose one of the following ways to print it

1. print the MMU version (materials A and B)

michelinfotbas_MMU_xy0.4mm_z0.3mm_EasyWoodFILL_WoodFILL.3mf

2. do a single material print solely with material A

michelinfotbas_SINGLECOLOR_xy0.4mm_z0.3mm_EasyWoodFILL.3mf

3. do a single material print starting with material B, add a swap tomaterial A at: 11.0mm

michelinfotbas_SINGLECOLOR_xy0.4mm_z0.3mm_EasyWoodFILL.3mf

Lamp shade attachment parts (2 material, 2.5 hours + 2 hours)

I suggest using FROGGY GOLD or similar fancy transparent PETG (referredto as material C here) and black PETG (material D)

skärmfäste_undre_listX4_xy0.4mm_z0.3mm_PET.3mf

For the upper shade attachment part, choose one of the followingways to print it

1. print the MMU version (materials C and D)

skärmfäste_övre_MMU_xy0.4mm_z0.3mm_PET_PET.3mf

2. do a single material print (material C)

skärmfäste_övre_SINGLECOLOR_xy0.4mm_z0.3mm_PET.3mf

3. do a single material print starting with material C, add a swap tomaterial D at: 1.4mm

skärmfäste_övre_SINGLECOLOR_xy0.4mm_z0.3mm_PET.3mf

Lamp shade (2 materials, 3 hours x 4)

0 I suggest using two transparent PETG-materials for each lamp shade(you have to make 4 prints in total). Choose one of the following ways toprint it (and consider using different material combinations for each of thefour prints): **1.** print the MMU version:skärmsida_MMU_xy0.4mm_z0.3mm_PET_PET.3mf **2.** do a singlematerial print: skärmsida_SINGLECOLOR_xy0.4mm_z0.3mm_PET.3mf**3.** do a single material print with an added material change at 1.7mm:skärmsida_SINGLECOLOR_xy0.4mm_z0.3mm_PET.3mf

About electricity

The lamp is set up for an E14 lamp socket found for example at the "Kjell& Co" shops in Sweden (https://www.kjell.com/se/produkter/hem-kontor-fritid/belysning/lamptillbehor/hallare/lamphallare-ojordad-e14-p39361) butavailable world wide, e.g. search ebay for "socket e14 lamp". Obviously,you will also need to buy an electric cable including a connector (I boughtmine at "Clas Ohlson" in Sweden). You must ENSURE not to overheat the

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

5.9 MBupdated 11. 9. 2020

printed parts so take good care of which lamps to use. Personally, I useLED lamps of **no more than 3W** in my constructions.

Assembly

Please also refer to the set of attached assembly photographs whenreading these instructions.

Base

Push the cable through the lower base, the leg and the printed lampsocket holder. Attach the cable to the E14 socket (be aware: only do this ifyou are experienced with electric components and you are allowed bylocal regulations to do so). Then, screw the E14 socket part onto theprinted lamp socket holder. Now press the parts together, keeping thecable short.

Attach the four feet to the four legs (screw them on with some care). Thenattach the four legs to the lower base the same way.

Add the lower lamp shade holder part to the lamp base (it fits on theprinted E14 socket holder) then add the lamp socket holder top. Add alamp (remember: no more than 3W LED).

Shades

With great care, keep two shade sides vertical, and slide one of the fourbars onto the rim common to the two shades. It should slide on easily.

Repeat this for the remaining three bars. Then gently push the upper lampshade holder onto the lamp shade - it will lock onto the four bars (notdirectly onto the shades).

Now turn the shade upside down, and carefully attach the lower shadeholder (which is mounted on the lamp base already). You are done!

lamphallare_lasdel_benx4_xy04mm_z03mm_woodfill.3mf

8.6 MBupdated 11. 9. 2020

12.2 MBupdated 11. 9. 2020

12.2 MBupdated 11. 9. 2020

34.0 KBupdated 11. 9. 2020

67.5 KBupdated 11. 9. 2020

67.1 KBupdated 11. 9. 2020

44.9 KBupdated 11. 9. 2020

44.1 KBupdated 11. 9. 2020

michelinpelare_tassarx4_xy04mm_z03mm_easywoodfill.3m

michelinfotbas_mmu_xy04mm_z03mm_easywoodfill_wood.

michelinfotbas_singlecolor_xy04mm_z03mm_easywoodf.3m

skarmfaste_undre_listx4_xy04mm_z03mm_pet.3mf

skarmfaste_ovre_mmu_xy04mm_z03mm_pet_pet.3mf

skarmfaste_ovre_singlecolor_xy04mm_z03mm_pet.3mf

skarmsida_mmu_xy04mm_z03mm_pet_pet.3mf

skarmsida_singlecolor_xy04mm_z03mm_pet.3mf

The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition