Yale Brings You a New IdeaIn Electric Lift Trucks...

Yale Brings You a New IdeaIn Electric Lift Trucks...

...an Indoor Electric Truck for the Outdoors

Yale® ERP-VLElectric Rider Trucks 4,500 - 7,000 lbs.

The Yale® ERP-VL pneumatic tire electric trucks provide breakthough design with a focus on ‘human engineering’ to minimize operator strain and fatigue. Controls are positioned for easy, intuitive operation. The floor is open and spacious. The steering wheel and operator’s seat are offset to reduce fatigue and improve efficiency. The use of pneumatic tires, made possible with an innovative battery positioning design, provides a smooth and comfortable ride.

The open spacious floor and increased operator storage set a new standard for electric forklifts.

All trucks shown with optional equipment.

ERP-VL INTUITIVE DESIGN & COMFORTERP-VL INTUITIVE DESIGN & COMFORT

ERP-VL INTUITIVE DESIGN & COMFORTERP-VL INTUITIVE DESIGN & COMFORT

Yale Materials Handling CorporationP.O. Box 7367, Greenville, NC 27835-7367

Tilt steer column with optional telescoping function and tilt memory.

A choice of standard hydraulic or optionalAccutouch mini-lever controls are available. Accutouch mini-levers are mounted on a fully adjustable armrest and feature a thumb activated directional control for maximum operator comfort.

Reverse drive handle with horn button enhances rear

driving comfort.

Optimally positioned operator interface (display) provides easy

system status.

The innovative “Drop Battery Box” design enables the use of pneumatic tires, providing a comfortable ride even over rough floors and unimproved surfaces. This design also provides a low step height for easy entry and exit.

ERP-VL CRITICAL COMPONENTSERP-VL CRITICAL COMPONENTSTough, industrial applications require industrial grade lift trucks that add productive value: operate at maximum uptime, perform at demanding performance levels, and require minimal cost to operate. Yale® ERP-VL lift trucks are designed and built with Industrial Grade Critical Components, providing outstanding productive value and economic life. It’s a difference you can count on.

MotorsElectric motors ensure the lift truck travels and lifts at speeds required for maximum productivity and throughput. AC motors eliminate brushes, significantly reducing maintenance costs. Steering motor functionality is integrated into the hydraulic motor, simplifying the system and increasing reliability. Motors are insulated with Class H insulation for superior heat resistance. Dual drive motors enable a tighter turning radius, improving maneuverability and productivity.

Drive AxleThe drive axle of a lift truck is required to absorb significant forces during normal operation, as well as support the weight of the mast and load. High strength gears and shafts resist stress from quick directional changes. The tough cast housing absorbs shock and vibration. Wet disc brakes virtually eliminate brake maintenance, while power assisted braking reduces strain on drive unit components.

Electrical SystemLinking the electronic components of a lift truck together for efficient operation, the electrical system must be durable and reliable for the toughest applications. CANbus technology reduces wiring and connections, improving system reliability. Sealed electrical connections resist moisture and dirt, increasing uptime. The innovative thermal management system protects key components, while ensuring maximum productivity.

HydraulicsHydraulics are the “muscles” of a lift truck, providing the force necessaryto lift heavy loads all shift long. O-ring face seal fittings resist leaks. A 10 micron hydraulic filter helps keep the hydraulic fluid clean,improving system reliability. Cast iron “stacked” valve sections provideboth excellent rigidity and exceptional serviceability.

Steer AxleSteer axles absorb a lot of punishment during a lift truck operation cycle, as they support the significant weight of the counterweight while being subjected to road shocks and vibration. Tough cast ductile iron axles provide one piece integrity for outstanding durability. Tapered roller bearings absorb multiple loading forces, improving reliability while simplifying the design. The “Continuous Stability Enhancement” system enhances truck stability in a simple, maintenance free design, without compromising uneven surface travel. The innovative “Zero Turn Radius”design provides enhanced maneuverability.

MastA lift truck’s mast is required to absorb significant stress during lifting and lowering operations, without incurring excessive maintenance downtime. Canted load rollers absorb front to back and side-to-side forces for better durability and reduced adjustments. Full-face contact of rollers prevents excessive wear of the channel, prolonging roller life. Rolled steel mast channels provide excellent stress distribution and durability.

ERP-VL CRITICAL COMPONENTSERP-VL CRITICAL COMPONENTS

Yale Materials Handling CorporationP.O. Box 7367, Greenville, NC 27835-7367

ERP-VL APPLICATION MATCHED PERFORMANCEERP-VL APPLICATION MATCHED PERFORMANCEFrom tough, short shuttle applications or long runs to ramp usage, the Yale® ERP-VL is built for varied applications. Adjustable performance parameters allow for customization to the specific needs of the application or the operator. The Extended Shift functionality provides an excellent balance between battery run time and truck productivity. Higher levels of productivity can be obtained with the optional Premium Performance Package.

The ERP-VL is available in 80 volt systems for truck capacities from 4,500 to 7,000 lbs.

All trucks shown with optional equipment

Premium Performance Package option provides up to a 16% increase in travel speed and a 26% increase in lift speed.

Extended Shift can be disabled for increased productivity levels.

Operator Selectable Performance Modes allow varying levels of truck performance.

80 Volt Control System provides maximum performance in long-haul applications.

Zero Turn Radius Steer Axle and Dual AC Drive Motors combine to provide extraordinary maneuverability.

ERP-VL APPLICATION MATCHED PERFORMANCEERP-VL APPLICATION MATCHED PERFORMANCE

Yale Materials Handling CorporationP.O. Box 7367, Greenville, NC 27835-7367

ERP-VL ENVIRONMENTALLY TRUSTWORTHYERP-VL ENVIRONMENTALLY TRUSTWORTHY

Yale has been a leading producer of zero emission trucks for years, and in 2009 we are rolling out a new generation of innovative, even more efficient trucks than ever before. We are collaborating on next generation energy technology to enable a broader group of customers to more easily make the switch from internal combustion engine trucks to zero emission electric trucks.

At Yale Materials Handling Corporation we are developing and producing lift trucks that improve efficiency and reduce energy consumption for our customers’ operations.

Zero emission electric powered lift trucks – Yale® is one of the largest volume producers of zero emissions electric lift trucks in the North American market. The company is among the earliest adopters of energy efficient AC motor and controller technology. At Yale, our continued pursuit of improved energy efficiency is affirmed by competitive testing, which shows that our ERP-VL electric rider product offers the best energy efficiency (energy used per load moved) of any lift truck in its class in North America.

Green innovations – For our electric trucks, Yale has introduced a system that recaptures energy into the truck during braking. This energy is then reused, lowering the overall energy consumption of the truck. Through innovative engineering, we reduce non-productive energy use throughout the vehicle by means of weight reduction, drive train efficiency (patents pending), and hydraulic system efficiency.

Green innovations – Yale is among the first to use working fuel cells in actual applications. We have supported the adoption of greener technologies through engineering collaboration, analysis, and extensive internal and field validation testing. Currently, we are investigating advanced, more efficient battery chemistries and technologies to reduce energy consumption, increase productivity, and reduce toxic material content.

All trucks shown with optional equipment.

Yale Materials Handling CorporationP.O. Box 7367, Greenville, NC 27835-7367 • © 2009, Yale Materials Handling Corporation • www.yale.com

Yale and are trademarks or registered trademarks of Yale Materials Handling Corporation in the United States and other countries. 2113-4 09/09

ERP-VL ENVIRONMENTALLY TRUSTWORTHYERP-VL ENVIRONMENTALLY TRUSTWORTHY