yshield en shieldingpaints

Upload: olde

Post on 03-Jun-2018

223 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/12/2019 YSHIELD en ShieldingPaints

    1/11

    Page4

    YSHIELD GmbH & Co. KGAm Schulplatz 294099 RuhstorfGERMANY

    Phone: 0049-8531-31713-0Fax: 0049-8531-31713-5Email: [email protected]: www.yshield.com

    Updated:February2014.

    Errorsexcepted.

    Pricesaresubject

    tochancewithoutnotice.

    Allrightsrese

    rved.

    EMR - PROTECTIONYSHIELD

    Product overview / technical data

    YSHIELD shielding paints areelectro-conductive coatingsfor the protection of large areas againsthigh-frequency (HF)radiation and (or) against low-frequency (LF)electric fields. Typical areas of ap-plication are single rooms, or the protection of whole buildings.

    YSHIELD Shielding paints 1/7

    HSF 55 HSF 74 HSF 54 NSF 34Shielding HF X X XShielding LF X X X X

    Brief description

    The best since

    10 years: Our newstandard-paintfor HF (+ LF)

    Pure silicate paintfor HF (+ LF) Well-establishedfor HF (+ LF)

    Well-established

    paintfor LF

    Binding agent Pure acrylate Silicate Pure acrylate Pure acrylateScreening1-layer

    38 dB (99.984%)at 7.5 m/l

    40 dB (99.99%)at 7.5 m/l

    36 dB (99.975%)at 7.5 m/l

    40 dB /at 7.5 m/l

    Screening2-layer

    45 dB (99.997%)at 2x 7.5 m/l

    47 dB (99.998%)at 2x 7.5 m/l

    43 dB (99.995%)at 2x 7.5 m/l

    Screening basis Carbon Carbon Carbon CarbonColor Black Black Black Black

    Application area Buildinginterior / exteriorBuildinginterior

    Buildinginterior / exterior

    Buildinginterior / exterior

    Applicable with

    Paint roller,paint brush,

    airless spraying

    (nozzle > 525)

    Paint roller,paint brush,

    airless spraying

    (nozzle > 525)

    Paint roller,paint brush,

    airless spraying

    (nozzle > 525)

    Paint roller,paint brush,

    airless spraying

    (nozzle > 515)Substrates Almost all Mineral Almost all Almost allWater resistance Very high Good Normal NormalPigmentation size < 100 m < 100 m < 100 m < 10 mElectr. resistance R> 2.0 R> 1.5 R> 3.0 R> 100Temperature range < 200 C < 250 C < 100 C < 100 CEcology Very good Very good Good GoodSolvent Water Water Water WaterVOC content * 0.0 g/l 0.0 g/l 0.2 g/l 0.2 g/lPAH content ** < 0.002 mg/kg < 0.002 mg/kg < 0.002 mg/kg < 0.002 mg/kgSd-value ~ 0.1 m ~ 0.01 m ~ 0.1 m ~ 0.1 mpH-value 8 12 8 8

    Adhesive pull strength 2.8 N/mm 2.5 N/mm 1.9 N/mm 4.1 N/mm

    Density 1.25 kg / l 1.3 kg / l 1.25 kg / l 1.05 kg / lMFFT 0 C 5 C 5 C 5 CGroundingrequired

    Interior: ESW(+) + EB2;Exterior: ESA Interior: ESW(+) + EB2

    Interior: ESW(+) + EB2;Exterior: ESA

    Interior: ESW(+) + EB2;Exterior: ESA+EB2

    Frost resistance *** Not frost-resistant Not frost-resistant 3 frost-/thaw cycles 3 frost-/thaw cyclesDelivery sizes 1 / 5 Liter 1 / 5 Liter 1 / 5 Liter 1 / 5 LiterShelf life 12 months 12 months 12 months 12 monthsTypical coverage,1 liter, single-layer

    Int.: 7.5 m (81 ft);Ext.: 5 m (54 ft) Int.: 7.5 m (81 ft)

    Int.: 7.5 m (81 ft);Ext.: 5 m (54 ft)

    Int.: 7.5 m (81 ft);Ext.: 5 m (54 ft)

    Price per m EUR 5.60 EUR 5.60 EUR 5.60 EUR 4.48Selection guide Our new standard

    paint for HF we alwaysrecommend!Supe-rior mechanical andchemical properties.

    Emission-free 0-VOCpaint.

    Only recommended ifthe focus is on maxi-

    mum ecology. Withouta preservative agent.

    Due to the frost resis-tance our recommenda-tion for shipping in the

    winter.

    Our standard paint forLF we always recom-mend! Superior me-

    chanical and chemicalproperties.

    *VOC = Volatile organic compounds. The actual EU limit value for wall paints is 30 g/l.** PAH = Polycyclic aromatic hydrocarbons. The nonbinding EU limit value for children toys is 0.2 mg/kg.*** The given frost resistance is only valid liquid in the container, of course on the wall its permanent frost-resistant.

  • 8/12/2019 YSHIELD en ShieldingPaints

    2/11

    Page5

    YSHIELD GmbH & Co. KGAm Schulplatz 294099 RuhstorfGERMANY

    Phone: 0049-8531-31713-0Fax: 0049-8531-31713-5Email: [email protected]: www.yshield.com

    Updated:February2014.

    Errorsexcepted.

    Pricesaresubject

    tochancewithoutnotice.

    Allrightsrese

    rved.

    EMR - PROTECTIONYSHIELD

    Shielding paint HSF55 (HF+LF) Our recommendation!

    CharacteristicsBased on a novel multi-phase pure acrylic binder. Breatha-ble, free of solvents or plasticizers, emission-free.For shiel-ding of high-frequency radiation (HF) and low-frequency elec-high-frequency radiation (HF) and low-frequency elec-tric fields (LF).

    As a 0-VOC paint emission-free and nearly odorless

    Improved resistance against humidity Improved adhesive tensile / impact strenght All-purpose paint for interior and exterior application Without metals, so long-term durable and corrosion resistant High attenuation, even at single-layer application

    UndergroundInterior and exterior: Excellent adhesion on all undergrounds likeexisting emulsion paints, sheetrock, wallpaper, cement, plaster,masonry, wood, etc.

    Top coating

    Preferably covered with plastic bonded, water-based emulsionpaints, facade paints or silicon resin paints. Very recommendedare KEIM dispersion silicate paints(Biosil, Ecosil, Optil). Depen-ding on their chemical composition, natural resin paints adhererelatively well. We do not recommend pure mineral paints! Dueto the high adhesive tensile strenght of 2.8 N/mm (ETAG 004recommends 0.25 N/mm), usable directly under pure organic plaster, no mineral pasters!

    GroundingMust be grounded! We recommend interior the grounding strap EB2plus grounding set ESW orESW+, exterior the fiber additive AF3plus the grounding set ESA.

    Frost resistanceNot frost resistant, however our packages never freeze on shipping due to 10 years experience!

    Shielding attenuationAttenuation of 38 dB(shielding effectiveness of 99.984 %) in one layer, attenuation of 45 dB(shield-ing effectiveness of 99.997 %) with two layers. The attenuation is regularly tested in our own labora-torydue to the standard ASTM D4935-10. The current measuring report is available uppon request.

    IngredientsWater, pure acylic binder, graphite, carbon black, eco-surfactant, eco-defoamer, thickener, preservative(MIT, BIT).

    Optional: Fiber additive AF3This paint is formulated without conductive carbon fibers to be airless sprayable. To bypass cracks for abetter grounding, it should be mixed with the fiber additive AF3.

    YSHIELD Shielding paints 2/7

    WLan

    WiMAX

    UMTS

    GSM900

    LTE

    LTE

    CBRADIO

    DVB-T

    TETRA

    DVB-T

    GSM

    1800

    -100

    -90

    -80

    -70

    -60

    -50

    -40

    -30

    -20

    -10

    0

    YSHIELD EMR-Protection Shielding paintHSF5530 MHz Electromagnet ic attenuati on to ASTM D4935-10 4000 MHz

    Oben: Einlagig mit 7,5 m pro Liter /Top: Single layer with 7.5 m per liter

    Unten: Zweilagig mit 2x 7,5 m pro Liter /Bottom: Double layer with 2x 7.5 m per liter

  • 8/12/2019 YSHIELD en ShieldingPaints

    3/11

    Page6

    YSHIELD GmbH & Co. KGAm Schulplatz 294099 RuhstorfGERMANY

    Phone: 0049-8531-31713-0Fax: 0049-8531-31713-5Email: [email protected]: www.yshield.com

    Updated:February2014.

    Errorsexcepted.

    Pricesaresubject

    tochancewithoutnotice.

    Allrightsrese

    rved.

    EMR - PROTECTIONYSHIELD

    YSHIELD Shielding paints 3/7

    Shielding paint HSF74 (HF+LF)

    CharacteristicsPure silicate paint based on potassium silicate. Highlybreathable, very low VOC content, free of solvents, without in-can preservation!For shielding of high-frequency radiation (HF)and low-frequency electric fields (LF).

    Developed with a bare of ingredients for maximum

    ecology Application only by a professional painter with protectiveequipment due to the ph-value of 12 (superalkaline)

    Without metals, so long-term durable and corrosion resistant High attenuation, even at single-layer application

    UndergroundOnly interior: Good adhesion on absorbent, untreated, preferablymineral undergrounds like chalk, silicate, clay, etc.. Restricteduse on absorbent emulsion paints, wallpapers, etc., please checkfirst! Not usable on gypsum based substrates!

    Top coatingCan be covered with water-based, plastic bonded emulsionpaints. Due to ecological reasons, KEIM dispersion silikatepaints(Biosil, Ecosil, Optil) as well as AURO high-grade lime paint(no.344) and silicate paint (no.303) are highly recommended.Many natural resin paints and paints made of clay or lime puttyare not recommended.

    GroundingMust be grounded! We recommend interior the grounding strap EB2plus grounding set ESW orESW+, optional for crack bridging the fiber additive AF3.

    Frost resistanceNot frost resistant, however our packages never freeze on shipping due to 10 years experience!

    Shielding attenuationAttenuation of 40 dB(shielding effectiveness of 99.99 %) in one layer, attenuation of 47 dB(shield-ing effectiveness of 99.998 %) with two layers. The attenuation is regularly tested in our own labora-torydue to the standard ASTM D4935-10. The current measuring report is available uppon request.

    IngredientsPotassium silicate, water, graphite, carbon black, eco-surfactant, eco-defoamer, cellulose, no preserva-tive agent.

    Optional: Fiber additive AF3This paint is formulated without conductive carbon fibers to be airless sprayable. To bypass cracks for abetter grounding, it should be mixed with the fiber additive AF3.

    WLan

    WiMAX

    UMTS

    GSM900

    LTE

    LTE

    CBRADIO

    DVB-T

    TETRA

    DVB-T

    GSM

    1800

    -100

    -90

    -80

    -70

    -60

    -50

    -40

    -30

    -20

    -10

    0

    YSHIELD EMR-Protection Shielding paintHSF7430 MHz Electromagne tic attenuation to ASTM D4935-10 4000 MHz

    Oben: Einlagig mit 7,5 m pro Liter /Top: Single layer with 7.5 m per liter

    Unten: Zweilagig mit 2x 7,5 m pro Liter /Bottom: Double layer with 2x 7.5 m per liter

  • 8/12/2019 YSHIELD en ShieldingPaints

    4/11

    Page7

    YSHIELD GmbH & Co. KGAm Schulplatz 294099 RuhstorfGERMANY

    Phone: 0049-8531-31713-0Fax: 0049-8531-31713-5Email: [email protected]: www.yshield.com

    Updated:February2014.

    Errorsexcepted.

    Pricesaresubject

    tochancewithoutnotice.

    Allrightsrese

    rved.

    EMR - PROTECTIONYSHIELD

    Shielding paint HSF54 (HF+LF)

    CharacteristicsBased on a high quality pure acrylic binder. Highly breatha-ble, very low VOC content, free of solvents. For shielding of high-frequency radiation (HF) and low-frequency electric fields (LF).

    Frost resistant for shipping in the winter Our well-established shielding paint,

    All-purpose paint for interior and exterior application Without metals, so long-term durable and corrosion resistant High attenuation, even at single-layer application

    UndergroundInterior and exterior: Excellent adhesion on various under-grounds like existing emulsion paints, sheetrock, wallpaper,cement, plaster, masonry, wood, etc.

    Top coatingPreferably covered with plastic bonded, water-based emulsionpaints, facade paints or silicon resin paints. Very recommended

    are KEIM dispersion silicate paints(Biosil, Ecosil, Optil). Depen-ding on their chemical composition, natural resin paints adhererelatively well. We do not recommend pure mineral paints! Dueto the adhesive tensile strenght (according to ETAG 004) of atleast 0.25 N/mm, usable directly under pure (not mineral) orga-nic plaster.

    GroundingMust be grounded! We recommend interior the grounding strap EB2plus grounding set ESW orESW+, exterior the fiber additive AF3plus the grounding set ESA.

    Frost resistanceFrost resistant(3 frost-/thaw cycles), shippable year-round by air cargo or by ship.

    Shielding attenuationAttenuation of 36 dB(shielding effectiveness of 99.975 %) in one layer, attenuation of 43 dB(shield-ing effectiveness of 99.995 %) with two layers. The attenuation is regularly tested in our own labora-torydue to the standard ASTM D4935-10. The current measuring report is available uppon request.

    IngredientsWater, pure acylic binder, graphite, carbon black, additives, preservative (MIT, BIT).

    Optional: Fiber additive AF3

    This paint is formulated without conductive carbon fibers to be airless sprayable. To bypass cracks for abetter grounding, it should be mixed with the fiber additive AF3.

    YSHIELD Shielding paints 4/7

    WLan

    WiMAX

    UMTS

    GSM900

    LTE

    LTE

    CBRADIO

    DVB-T

    TETRA

    DVB-T

    GSM

    1800

    -100

    -90

    -80

    -70

    -60

    -50

    -40

    -30

    -20

    -10

    0

    YSHIELD EMR-Protection Shielding paintHSF5430 MHz Electromagne tic attenuation to ASTM D4935-10 4000 MHz

    Oben: Einlagig mit 7,5 m pro Liter /Top: Single layer with 7.5 m per liter

    Unten: Zweilagig mit 2x 7,5 m pro Liter /Bottom: Double layer with 2x 7.5 m per liter

  • 8/12/2019 YSHIELD en ShieldingPaints

    5/11

    Page8

    YSHIELD GmbH & Co. KGAm Schulplatz 294099 RuhstorfGERMANY

    Phone: 0049-8531-31713-0Fax: 0049-8531-31713-5Email: [email protected]: www.yshield.com

    Updated:February2014.

    Errorsexcepted.

    Pricesaresubject

    tochancewithoutnotice.

    Allrightsrese

    rved.

    EMR - PROTECTIONYSHIELD

    YSHIELD Shielding paints 5/7

    Shielding paint NSF34 (LF)

    CharacteristicsBased on a high quality pure acrylic binder. Highly breathable,very low VOC content, free of solvents. For shielding of low-fre-low-fre-quency electric fields (LF).

    Only for low-frequency electric fields (LF) Our top-selling, well-established shielding paint

    All-purpose paint for interior and exterior application Without metals, so long-term durable and corrosion resistant

    UndergroundInterior and exterior: Excellent adhesion on various under-grounds like existing emulsion paints, sheetrock, wallpaper,cement, plaster, masonry, wood, etc.

    Top coatingPreferably covered with plastic bonded, water-based emulsion paints, facade paints or silicon resinpaints. Very recommended are KEIM dispersion silicate paints(Biosil, Ecosil, Optil). Depending ontheir chemical composition, natural resin paints adhere relatively well. We do not recommend pure

    mineral paints! Due to the high adhesive tensile strenght even usable directly under pure (not mineral)organic plaster.

    GroundingMust be grounded! We recommend interior the grounding strap EB2plus grounding set ESW orESW+, exterior the fiber additive AF3plus the grounding set ESA.

    Frost resistanceFrost resistant(3 frost-/thaw cycles), shippable year-round by air cargo or by ship.

    Shielding attenuationAttenuation of 40 dB(shielding effectiveness of 99 %) in one layer. The shielding attenuation is regu-larly tested in our own laboratory. The current measuring report is available uppon request.

    IngredientsWater, pure acylic binder, carbon black, additives, preservative (MIT, BIT).

    Optional: Fiber additive AF3This paint is formulated without conductive carbon fibers to be airless sprayable. To bypass cracks for abetter grounding, it should be mixed with the fiber additive AF3.

  • 8/12/2019 YSHIELD en ShieldingPaints

    6/11

    Page9

    YSHIELD GmbH & Co. KGAm Schulplatz 294099 RuhstorfGERMANY

    Phone: 0049-8531-31713-0Fax: 0049-8531-31713-5Email: [email protected]: www.yshield.com

    Updated:February2014.

    Errorsexcepted.

    Pricesaresubject

    tochancewithoutnotice.

    Allrightsrese

    rved.

    EMR - PROTECTIONYSHIELD

    Fiber additive AF3

    CharacteristicsSpecial additive for mixing with our shielding paints HSF55,HSF54, NSF34. All our shielding paints are formulated withoutcrack-bridging carbon fibers for airless spray application. In caseof cracks forming in the substrate, this additive contains long,electrically conductive carbon fibers which guarantee the groun-ding even without using the grounding strap.

    Frost resistanceFrost resistant(3 frost-/thaw cycles), shippable year-round.

    ProcessingStir in the additive (90 ml) into 5 liter shielding paint. Use anelectro mixer for at least for one minute, that all mixes homoge-neously .

    IngredientsWater, carbon black, carbon fibers, additives, preservative (MIT, BIT)

    Dispersion glue DKL90 For our nettings / fleeces

    CharacteristicsSpecial coordinated dispersion glue for binding our sheetmaterials to walls, ceilings, floors, doors, etc.. High quality classwater-resistant special glue based on acrylics, breathable, low-emission and solvent-free. Electrically conductive, that thematerials dont get isolated for grounding.

    Frost resistance

    Not frost resistant, however our packages never freeze onshipping due to 10 years experience!

    ProcessingThe application is identical to a wallpaper glue! Avoid bucklingsand wrinkles in the materials! The wall surface and the backsideof the material is primed with a painters roller. The material is inserted wet-on-wet and fixed by hand(with disposable gloves) or with a pressure roller. Work quickly and strip by strip so that the glue wontget dry.

    Technical data

    Specially for the following materials:HNG80, HNG100, HNV80, NCV95 Delivery sizes: 5 liter Coverage: 17.5 m - 25 m, depending on the underground Ingredients: Acrylic binder, water, carbon black, additives, preservative (MIT, BIT) Color: Black Surface conductivity: 400 ohm (square resistance R)

    YSHIELD Shielding paints 6/7

  • 8/12/2019 YSHIELD en ShieldingPaints

    7/11

    Page10

    YSHIELD GmbH & Co. KGAm Schulplatz 294099 RuhstorfGERMANY

    Phone: 0049-8531-31713-0Fax: 0049-8531-31713-5Email: [email protected]: www.yshield.com

    Updated:February2014.

    Errorsexcepted.

    Pricesaresubject

    tochancewithoutnotice.

    Allrightsrese

    rved.

    EMR - PROTECTIONYSHIELD

    YSHIELD Shielding paints 7/7

    Common characteristics

    Simple handling and processingYSHIELD shielding paints can be universally applied. Com-pared to wallpapers, fleeces or nettings they are easy to apply,even in structured rooms with bays, pitched roofs and dormers.Painters recommend our shielding paints for ease of applica-tion. All paints are best applied with a paint roller.

    Perfect corrosion restistanceMany shielding products containing metals are not resistant tocorrosion. Our shielding paints does not contain any metals, buta mixture of carbons. These are long-term durable and stableagainst corrosioneven in humid enviroment.

    Emissions VOC / PAHOur shielding paints are tested regularly from the TV-SDon the content of VOC (volatile organiccompounds) and PAH (polycyclic aromatic hydrocarbons). 1) The actual VOC limitis 30 g/l, our shiel-ding paints contain only 0.0 g/l to 0.2 g/l. 2) The often recommended PAH limit(for category 1) is 0.2mg/kg, our paints contain 0.002 mg/kg, so they are 100 times below the limit even for children toys.

    PreservationAny kind of aqueous paint must be preserved. Isothiazolinone-compounds are generally controver-sial. But only in terms of CIT, which is not used in our paints. Further to this we reject preservation withBIT/silver, like utilized in eco-paints, as we dont want to use nanosilver. Our preservation with MIT/BIT has a very low allergy potentialwhich is also confirmed by MCS-customers. As an alternative, ourshielding paint HSF74, is absolutely free from any kind of preservatives.

    SustainabilityDue to its paint-typical holohedral structure without holes, our shielding paints have a nearly linearattenuation up to very high frequencies, regardless of the direction of signal polarization. Prooved upto 4/18/30 GHz (depending on the test method) they are very future-proof.

    Carefully selected ingredientsYSHIELD shielding paints do not contain solvents, plasticisers or any other toxic ingredients.All in-gredients were carefully selected, regardless of priceand according to their high quality and safety.

    Grounding instructionsPlease find more information about the necessary grounding under grounding accessories.

    Handling and processing instructionsPlease find detailed handling instructions in our technical data sheets on our website on the corre-sponding product pages! Upon request, we will send you these data sheets!

    Areas of applicationIn private areasfor the protection against cell phone towers, TV and radio broadcasting antennas,radar, digital standard cordless telephones, wireless networks or power supply lines. In commerce, sci-ence, research and defence facilitiesto prevent interception of data from wireless networks, to pro-tect potentially bugged conference rooms or to shield technical equipment. Further applications: Datacenters, technical rooms, schools, nurseries, hotel rooms, hospital rooms, recording studios, etc.

  • 8/12/2019 YSHIELD en ShieldingPaints

    8/11

  • 8/12/2019 YSHIELD en ShieldingPaints

    9/11

    Page22

    YSHIELD GmbH & Co. KGAm Schulplatz 294099 RuhstorfGERMANY

    Phone: 0049-8531-31713-0Fax: 0049-8531-31713-5Email: [email protected]: www.yshield.com

    Updated:February2014.

    Errorsexcepted.

    Pricesaresubject

    tochancewithoutnotice.

    Allrightsrese

    rved.

    EMR - PROTECTIONYSHIELD

    YSHIELD Project examples 2/4

    Shielding one-family house (194 W/m0.01 W/m), Austria

    Shielding one-family house (604 W/m0.26 W/m), Australia

    Shielding one-family house, Australia

    Art installation with conductive paint HSF54, Great Britain

  • 8/12/2019 YSHIELD en ShieldingPaints

    10/11

    Page23

    YSHIELD GmbH & Co. KGAm Schulplatz 294099 RuhstorfGERMANY

    Phone: 0049-8531-31713-0Fax: 0049-8531-31713-5Email: [email protected]: www.yshield.com

    Updated:February2014.

    Errorsexcepted.

    Pricesaresubject

    tochancewithoutnotice.

    Allrightsrese

    rved.

    EMR - PROTECTIONYSHIELD

    YSHIELD Project examples 3/4

    Shielding airport terminal, Asia

    Shielding development department at Asus-computer, Taiwan

    Shielding apartment houses, Greece

    Shielding BAUFRITZ framehouses, Germany

  • 8/12/2019 YSHIELD en ShieldingPaints

    11/11

    YSHIELD GmbH & Co. KGAm Schulplatz 294099 RuhstorfGERMANY

    Phone: 0049-8531-31713-0Fax: 0049-8531-31713-5Email: [email protected]: www.yshield.com

    Updated:February2014.

    Errorsexcepted.

    Pricesaresubject

    tochancewithoutnotice.

    Allrightsrese

    rved.

    EMR - PROTECTIONYSHIELD

    YSHIELD Project examples 4/4

    Shielding one-family house, Germany

    Shielding one-family house (616 W/m0.5 W/m), Hawaii

    Shielding student project school building, Austria

    Shieldings recording studios, Taiwan