zoneguard ® openhole isolation packers openhole isolations packer systems

ZoneGuard® Openhole Isolation Packers

Openhole Isolations Packer Systems

© 2014 HALLIBURTON. ALL RIGHTS RESERVED. 222

▌ZoneGaurd® Openhole Isolation Packer Halliburton’s new openhole packer family

▌Style of packer HE – High Expansion SR – Short Radius FP – Frac Pack

The packer style will be dependent on wellbore environment and customer requirements

What is it?


▌Selective production management in horizontal wellbores

▌Reliably control inflow or injection within selected sections of the wellbore

▌Wide range of openhole isolation capabilities with one packer design (unique to ZoneGuard HE packers)

▌Set multiple packers at one time(pressure up tubing)

▌Set a single packer at a time(isolation setting tool)

How it Will Benefit you


Why it Will Help

▌Instant setting and sealing capabilities

▌High differential pressure ratings

▌Large range of openhole ID capabilities

▌Long term isolation reliability


Unique Features

▌ Large rubber element expansion

▌ Multi-section / multi-durometer elements

▌ Small RIH OD

▌ Adjustable start to set

▌ Anti-preset feature

▌ Internal body lock ring

▌ Unique back-up ring system

▌ Hydraulic set

▌ Can be set using:

▌ Tubing pressure

▌ Isolation setting tool


Where do our solutions add value

▌Unconventional reservoirs Openhole zonal isolation Stage cementing Selective production

▌Deepwater Gas or water shutoff Stimulation / fracturing

▌Mature fields Re-frac opportunities Lateral abandonment


Designed for Reliability and Efficiency

▌ Packer pre-setting while running in hole

ZoneGuard packer feature – Anti-preset piston lock ring will prevent the packer from prematurely setting while running in hole

▌ Packer is not holding – requires differential pressure rating

ZoneGuard packer feature – Multi-element, multi-durometer rubber element package with a uniquely designed backup ring system to provide maximum differential pressure capabilities

▌ Packer loosing rubber element compression over time

ZoneGuard packer feature – Once the packer has been set into place an internal locking system will lock the packer in the set energized position - keeping the rubber element package compressed and sealed against the openhole ID


CASE STUDY

ZoneGuard® SR Packer Case StudyCHALLENGE: A customer in Canada wanted to perform a multi-zone frac job to optimize well production. The

desire was to isolate and selectively treat 27 zones in the most efficient completions possible.

SOLUTION: Halliburton proposed using hydraulically set ZoneGuard SR packers to isolate all 27 zones and

achieve the desired zonal isolation. In conjunction with the packers they utilized RapidStage™ sleeves for selectively treating the zones. The ability to run, set and isolate the zones in one run provided a cost-effective solution for this well and allowed the customer to stimulate the well as soon as the rig was released.

RESULT: The ZoneGuard SR packer short compact design helped ensure the success of getting the job to

depth. The packer’s high-pressure capabilities provided the isolation needed for effective job placement. All 27 zones were effectively isolated, and the target zone treated without any complications.

When it’s Helpful


Who to Contact, Where to get more information

Kyle HallZoneGuard® Openhole Isolation Packer Product Champion

[email protected]

Phone: 972-418-2892Cell: 972-489-2100

www.halliburton.com/Openhole Packers

http://halworld.corp.halliburton.com/en/ps/completions/well-completions/production-packers/Openhole-packers.page?node-id=hlz0hyot

zoneguard ® openhole isolation packers openhole isolations packer systems

Documents