737hu1356en-080813 - soyal en.pdf · meets the high performance.(on the mode of 737 platform) its...
TRANSCRIPT
v080813
1. AR-737H/U1356 INTODUCTION
2. PIN DEFINE1.2 MIFARE
2.1 Wiring of AR-737H/U (Version I )
2.1 Wiring of AR-737H/U (Version II & afterward)
2.3 Adding for Version III & afterward
1.3 Function Support
1.1 Contents
1.4 Specification
1.5 Difference in Versions
1.6 Wiegand Format Setting
Mifare is the most widely applied contactless smart card technology developed by PHILIPS with ISO standard.
AR-737H/U 1356 adopts PHILIPS high-security proven standard and meets the high performance.(On the mode of 737 platform) Its MIFARE chip equip the read & write function to ensure auxiliary WG reader(AR-737U 1356) or networking reader (AR-737H 1356) .
6-PIN Jumper select “OUTPUT”II
Mode
VersionAR-737HAR-737U
JP3 Open JP3 Close
JP3 Open JP3 Close
I
III
IV
6-PIN Jumper select “WG”
6-PIN Jumper select “OUTPUT”6-PIN Jumper select “WG”
Note: 1.Version IV & afterward could be adjusted to H or U by dip-switch and 6-pin jumper 2.Version I-III have to be changed by hardware modification.
The version III adds a 6-pin jumper for door&alarm relay driver and WG switching. Its setting should follow the rule below:
WG OUTPUTWG OUTPUT
AR-737H
Function
PIN
Relay triger
Orange/Gray
AR-737U
Function Wiegand
Green/BluePIN
Data 0Data 1
1
ON
2 3 4 5
1
ON
2 3 4
1
ON
2 3 4 5
1
ON
2 3 4
WD1 ALARMDOOR
ALARMDOORWD0
WD1WD0
Output format
WG34
WG26
ABA10
Serial ASCII
J1 (DIP_SW1)
Open (OFF)
Close (ON)
Open (OFF)
Close (ON)
J2 (DIP_SW2)
Open (OFF)
Open (OFF)
Close (ON)
Close (ON)
DIP_SW
DIP_SW
DIP_SWDIP_SW
DIP_SW
DIP_SW
3.1.1 AR-737H1356 connection to PC
1
3.1.2 Software setting from Soyal device tools
2
3
4
5
6
Select communication port. Enter the target AR-737H’s Node ID (To ignore Node ID , enter 255)
Enable or disable the functions of AR-737H. Click “write” to download new setting to device.
Click ”Read” to upload parameters from device to Node737 application. The screen will show current device parameter and its version, and then key-in the Node ID you want to change.
6
4
5
2
1
3 Read Write Exit
3. INSTALLATION DIAGRAM
3.2 AR-737U connect to AR-721H
AR-721H
3.4 AR-737H connect to EM lock & Exit Button with Relay board
3.3 AR-737U connect to AR-829E, AR-727H
AR-737H
RS-485 A+
RS-485 B-
Exit Button
4. APENDIX
Be sure to record the user number, the user name, the card ID number (card code)and the user code. It’s import to keep this information in a secure place. A block user log form has been included for purpose. Do not write on this form; the form is as a photocopy master.
User No. User Code User Name Site code : Card code
v080813
123456
ModeUnit
737U125(WG)
Version IVDIP_SW6.7.8
737H125(RS-485)
1.6 Indicator Displaying Way While Card Flashin
1. AR-737H/U 125 INTRODUCTION
1.3 Difference in Versions
AR-737HAR-737UMode
Version
JP2 Open
JP2 Open4-PIN Jumper select“WG”
JP2 Close
6-PIN Jumper select “OUTPUT”
JP2 Close4-PIN Jumper select “OUTPUT”
I
II
III
IV
V
The AR-737H/U125 is a proximity reader which allows performing as an auxiliary WG reader(AR-737U 125) or networking reader(AR-737H 125)
1.1 Contents
1.2 Specification
JP2
Jumper
667 7
JumperJP2
JumperJumperJP2
6-PIN Jumper select “WG”
8-PIN Jumper select “OUTPUT”8-PIN Jumper select “WG”
Version I Version II Version III Version IV Version V
1.7 Adding for Version II & III & IVThe version ll , lll & IV add a 6-pin jumper for wiegand signal or relay output selection. Its setting should follow the rules as below:
FrequencyPower RequirementPower Consumption
Baud RateEnvironmentIndicatorRead / WriteProximity Reading RangeSupported TagsWaterproofColorDimension(mm)Weight(g)Housing Material
Communication Interface
125KHz9-24 VDC<1.5WRS-485(737H only),Wiegand(737U only)and OMRON9600 bps / 19200 bps(N,8,1)-20 C~+75 CA bi-color LED and a beeperRead only12-20cmEM4001/EM4012 compliantYes(Option)Dark Gray113(L)x71(W)x36(H)80ABS
o o
1234
JP2 Open5-PIN Jumper select“WG”
12345
JP2 Close5-PIN Jumper select “OUTPUT”
12345
1234
123456
123456
12345678
78
WG OUTPUTWG OUTPUT
AR-737U
Function Wiegand
Green/BluePINAR-737H
Function
PIN
Relay triger
Green/Blue
SOYAL warrants that the product(s)shall be free from manufacturing defects in materials and workmanship for a period of fifteen(15) months from the date of delivery provided that the product was properly installed and used.
on the PCB board ,
because it is SOYAL warranty.
Please visit WWW.SOYAL.COM to download the Soyal software, Manual, Catalog & User guide
Data 0Data 1
0506-123456AR-737HXXXXXXNote: Do not tear a paster that
1.4 Mode Setting
1.5 Wiegand Format Setting
JP2VersionI,II,III
Open(Off)
Close(On)
Version IVDIP_SW6
Open(Off)
Close(On) J7.Open(Off)J8.Open(Off)
J6.Close(On)
J6.Open(Off)J7.Close(On)J8.Close(On)
3. INSTALLATION DIAGRAM
3.1.1 AR-737H125 connection to PC
PIN DEFINE
2.1 Wiring of AR-737H/U 125 (Version I)
2.2 Wiring of AR-737H/U 125 (Version II& III & IV)PIN DEFINE
v080821
1
2
3
4
5
6
Select communication port.
Enter the target AR-737H’s Node ID (To ignore Node ID , enter 255)
Enable or disable the functions of AR-737H.
Click “write” to download new setting to device.
Click ”Read” to upload parameters from device to Node737 application.
The screen will show current device parameter and its version, and then key-in the Node ID you want to change.
3.2 AR-737U connect to AR-721H
AR-721H
3.4 AR-737H connect to EM lock & Exit Button with Relay board
3.3 AR-737U connect to AR-829E, AR-727H
AR-737H
RS-485 A+
RS-485 B-
Exit Button
3.1.2 Software setting from Soyal device tools
6
4
5
2
1
3 Read Write Exit
123456
ModeUnit
737U125(WG)
Version IVDIP_SW6.7.8
737H125(RS-485)
1.6 Indicator Displaying Way While Card Flashin
1. AR-737H/U 125 INTRODUCTION
1.3 Difference in Versions
AR-737HAR-737UMode
Version
JP2 Open
JP2 Open4-PIN Jumper select“WG”
JP2 Close
6-PIN Jumper select “OUTPUT”
JP2 Close4-PIN Jumper select “OUTPUT”
I
II
III
IV
V
The AR-737H/U125 is a proximity reader which allows performing as an auxiliary WG reader(AR-737U 125) or networking reader(AR-737H 125)
1.1 Contents
1.2 Specification
JP2
Jumper
667 7
JumperJP2
JumperJumperJP2
6-PIN Jumper select “WG”
8-PIN Jumper select “OUTPUT”8-PIN Jumper select “WG”
Version I Version II Version III Version IV Version V
1.7 Adding for Version II & III & IVThe version ll , lll & IV add a 6-pin jumper for wiegand signal or relay output selection. Its setting should follow the rules as below:
FrequencyPower RequirementPower Consumption
Baud RateEnvironmentIndicatorRead / WriteProximity Reading RangeSupported TagsWaterproofColorDimension(mm)Weight(g)Housing Material
Communication Interface
125KHz9-24 VDC<1.5WRS-485(737H only),Wiegand(737U only)and OMRON9600 bps / 19200 bps(N,8,1)-20 C~+75 CA bi-color LED and a beeperRead only12-20cmEM4001/EM4012 compliantYes(Option)Dark Gray113(L)x71(W)x36(H)80ABS
o o
1234
JP2 Open5-PIN Jumper select“WG”
12345
JP2 Close5-PIN Jumper select “OUTPUT”
12345
1234
123456
123456
12345678
78
WG OUTPUTWG OUTPUT
AR-737U
Function Wiegand
Green/BluePINAR-737H
Function
PIN
Relay triger
Green/Blue
SOYAL warrants that the product(s)shall be free from manufacturing defects in materials and workmanship for a period of fifteen(15) months from the date of delivery provided that the product was properly installed and used.
on the PCB board ,
because it is SOYAL warranty.
Please visit WWW.SOYAL.COM to download the Soyal software, Manual, Catalog & User guide
Data 0Data 1
0506-123456AR-737HXXXXXXNote: Do not tear a paster that
1.4 Mode Setting
1.5 Wiegand Format Setting
JP2VersionI,II,III
Open(Off)
Close(On)
Version IVDIP_SW6
Open(Off)
Close(On) J7.Open(Off)J8.Open(Off)
J6.Close(On)
J6.Open(Off)J7.Close(On)J8.Close(On)
3. INSTALLATION DIAGRAM
3.1.1 AR-737H125 connection to PC
PIN DEFINE
2.1 Wiring of AR-737H/U 125 (Version I)
2.2 Wiring of AR-737H/U 125 (Version II& III & IV)PIN DEFINE
v080821
1
2
3
4
5
6
Select communication port.
Enter the target AR-737H’s Node ID (To ignore Node ID , enter 255)
Enable or disable the functions of AR-737H.
Click “write” to download new setting to device.
Click ”Read” to upload parameters from device to Node737 application.
The screen will show current device parameter and its version, and then key-in the Node ID you want to change.
3.2 AR-737U connect to AR-721H
AR-721H
3.4 AR-737H connect to EM lock & Exit Button with Relay board
3.3 AR-737U connect to AR-829E, AR-727H
AR-737H
RS-485 A+
RS-485 B-
Exit Button
3.1.2 Software setting from Soyal device tools
6
4
5
2
1
3 Read Write Exit