aabtkjx0 - shandong university

©2004 by Prentice Hall, Inc.A Pearson Company

Figure Number: 03-01 GieseckeEngineering Graphics, 8EPage Number: Principal Items of Equipment.

AABTKJX0


Figure Number: 03-02 GieseckeEngineering Graphics, 8EPage Number: The T-square.

AABTKJY0


Figure Number: 03-03 GieseckeEngineering Graphics, 8EPage Number: Testing the Working Edge of the Drawing Board.

AABTKJZ0


Figure Number: 03-04 GieseckeEngineering Graphics, 8EPage Number: Testing the T-square.

AABTKKA0


Figure Number: 03-05 GieseckeEngineering Graphics, 8EPage Number: Placing Paper on Drawing Board.

AABTKKB0


Figure Number: 03-06 GieseckeEngineering Graphics, 8EPage Number: Positions of Drafting Tape.

AABTKKC0


Figure Number: 03-07 a-c GieseckeEngineering Graphics, 8EPage Number: Drawing Pencils.

AABTKKD0

HardThe hard leads in this group (left) are used where extreme accuracy is required, as on graphical com-putations and charts and diagrams. The softer leads in this group (right) are sometimes used for line work on engineering drawings, but their use is restricted because the lines are apt to be too light.

MediumThese grades are for general purpose work in technical drawing. The softer grades (right) are used for technical sketching, for letter-ing, arrowheads, and other free-hand work on mechanical drawings. The harder leads (left) are used for line work on machine drawings and architectural draw-ings. The H and 2H leads are wide-ly used on pencil tracings for reproduction.

SoftThese leads are too soft to be useful in mechanical drafting. Their use for such work results in smudged, rough lines that are hard to erase, and the lead must be sharpened continually. These grades are used for art work of various kinds, and for full-size details in architectural drawing.


Figure Number: 03-08 C GieseckeEngineering Graphics, 8EPage Number: Lead Grade Chart.

AADWWEM0


Figure Number: 03-09 GieseckeEngineering Graphics, 8EPage Number: Alphabet of Lines (Full Size).

AABTKKF0


Figure Number: 03-10 GieseckeEngineering Graphics, 8EPage Number: "Line Gage. Courtesy of Koh-I-Noor Rapidograph, Inc. "

AABTKKG0


Figure Number: 03-11 a-d GieseckeEngineering Graphics, 8EPage Number: Drawing a Horizontal Line.

AABTKKH0


Figure Number: 03-12 C GieseckeEngineering Graphics, 8EPage Number: Drawing a Vertical Line.

AADWWEW0


Figure Number: 03-13 a,b GieseckeEngineering Graphics, 8EPage Number: Triangles.

AABTKKJ0


Figure Number: 03-14 GieseckeEngineering Graphics, 8EPage Number: The Triangle Wheel.

AABTKKK0


Figure Number: 03-15 a,b GieseckeEngineering Graphics, 8EPage Number: Protractors.

AABTKKL0


Figure Number: 03-16 GieseckeEngineering Graphics, 8EPage Number: Adjustable Triangle.

AABTKKM0


Figure Number: 03-17 GieseckeEngineering Graphics, 8EPage Number: To Draw a Pencil Line Through Two Points.

AABTKKN0


Figure Number: 03-18 a-c GieseckeEngineering Graphics, 8EPage Number: To Draw a Line Parallel to a Given Line.

AABTKKO0


Figure Number: 03-19 a-c GieseckeEngineering Graphics, 8EPage Number: To Draw a Line Perpendicular to a Given Line.

AABTKKP0


Figure Number: 03-20 a,b GieseckeEngineering Graphics, 8EPage Number: Perpendicular Lines.

AABTKKQ0


Figure Number: 03-21 GieseckeEngineering Graphics, 8EPage Number: Line at 30° with Given Line.

AABTKKR0


Figure Number: 03-22 a-e GieseckeEngineering Graphics, 8EPage Number: Types of Scales.

AABTKKS0


Figure Number: 03-23 a-g GieseckeEngineering Graphics, 8EPage Number: Scale Guard.

AABTKKT0


Figure Number: 03-24 a-c GieseckeEngineering Graphics, 8EPage Number: Decimal Dimensions.

AABTKKU0


Figure Number: 03-25 a-c GieseckeEngineering Graphics, 8EPage Number: Metric Scales.

AABTKKV0


Figure Number: 03-26 a-c GieseckeEngineering Graphics, 8EPage Number:

AABTKKW0


Figure Number: 03-27 a,b GieseckeEngineering Graphics, 8EPage Number: Accurate Measurements.

AABTKKX0


Figure Number: 03-27.01 UN GieseckeEngineering Graphics, 8EPage Number:

AABTKIU0


Figure Number: 03-28 GieseckeEngineering Graphics, 8EPage Number: Giant Bow Set. Courtesy of Frank Oppenheimer.

AABTKKY0

(a) CENTER-WHEEL (b) QUICK ACTING


Figure Number: 03-29 a,b GieseckeEngineering Graphics, 8EPage Number: Giant Bow Compass.

AABTKKZ0


Figure Number: 03-30 GieseckeEngineering Graphics, 8EPage Number: Using the Giant Bow Compass.

AABTKLA0


Figure Number: 03-31 GieseckeEngineering Graphics, 8EPage Number: Drawing a Circle of Large Radius with the Beam Compass.

AABTKLB0


Figure Number: 03-32 a-d GieseckeEngineering Graphics, 8EPage Number: Compass Lead Points.

AABTKLC0


Figure Number: 03-33 GieseckeEngineering Graphics, 8EPage Number: Sharpening Compass Lead.

AABTKLD0

(a)

(b)


Figure Number: 03-34 GieseckeEngineering Graphics, 8EPage Number: "Beam Compass Sets. (a) Courtesy of Frank Oppenheimer; (b) Courtesy of Tacro, Div. of A&T Importers, Inc. "

AABTKLE0


Figure Number: 03-35 GieseckeEngineering Graphics, 8EPage Number: Adjusting the Dividers.

AABTKLH0


Figure Number: 03-36 GieseckeEngineering Graphics, 8EPage Number: Using the Dividers.

AABTKLI0


Figure Number: 03-37 GieseckeEngineering Graphics, 8EPage Number: Proportional Dividers.

AABTKLJ0


Figure Number: 03-38 GieseckeEngineering Graphics, 8EPage Number: Combination Pen and Pencil Bow. Courtesy of Frank Oppenheimer.

AABTKLK0


Figure Number: 03-39 a-c GieseckeEngineering Graphics, 8EPage Number: Bow Instruments with Side Wheel.

AABTKLL0


Figure Number: 03-40 a,b GieseckeEngineering Graphics, 8EPage Number: Using the Bow Instruments.

AABTKLM0


Figure Number: 03-41 a,b GieseckeEngineering Graphics, 8EPage Number: Compass-Lead Points.

AABTKLN0


Figure Number: 03-42 a,b GieseckeEngineering Graphics, 8EPage Number: Drop Spring Bow Instruments.

AABTKLO0

I

II

III

IV

V

VI


Figure Number: 03-43 1-6 GieseckeEngineering Graphics, 8EPage Number: To Lay Out a Sheet. Layout A-2; see inside front cover.

AABTKLP0


Figure Number: 03-44 a-d GieseckeEngineering Graphics, 8EPage Number: Technique of Lines (Enlarged).

AABTKLQ0


Figure Number: 03-45 a-c GieseckeEngineering Graphics, 8EPage Number: Contrast of Lines (Enlarged).

AABTKLR0


Figure Number: 03-46 GieseckeEngineering Graphics, 8EPage Number: "Technical Fountain Pen and Pen Set.Courtesy of Koh-I-Nor Rapidograph, Inc. "

AABTKLS0


Figure Number: 03-47 GieseckeEngineering Graphics, 8EPage Number: Using the Technical Fountain Pen.

AABTKLT0


Figure Number: 03-48 GieseckeEngineering Graphics, 8EPage Number: Alphabet of Ink Lines (Full Size).

AABTKLW0


Figure Number: 03-49 1-4 GieseckeEngineering Graphics, 8EPage Number: Order of Inking.

AABTKLX0


Figure Number: 03-50 a-s GieseckeEngineering Graphics, 8EPage Number: Irregular or French Curves.

AABTKLY0


Figure Number: 03-51 a,b GieseckeEngineering Graphics, 8EPage Number: Adjustable Curves.

AABTKLZ0


Figure Number: 03-52 GieseckeEngineering Graphics, 8EPage Number: Using the Irregular Curves.

AABTKMA0


Figure Number: 03-53 GieseckeEngineering Graphics, 8EPage Number: Settings of Irregular Curve.

AABTKMB0


Figure Number: 03-54 a-d GieseckeEngineering Graphics, 8EPage Number: Symmetrical Figures.

AABTKMC0


Figure Number: 03-55 GieseckeEngineering Graphics, 8EPage Number: Templates.

AABTKMD0


Figure Number: 03-56 GieseckeEngineering Graphics, 8EPage Number: Drafting Machine.Courtesy of VEMCO Corporation.

AAACYVX0


Figure Number: 03-57 GieseckeEngineering Graphics, 8EPage Number: Adjustable Drafting Table with Track Drafting Machine.Courtesy of Keuffel & Esser Co.

AABTKME0


Figure Number: 03-58 GieseckeEngineering Graphics, 8EPage Number: Parallel-Ruling Straightedge.

AABTKMF0


Figure Number: 03-59 GieseckeEngineering Graphics, 8EPage Number: "A Drawing Created Using CAD.Courtesy of Zura Sports, Inc. "

AAACZBP0


Figure Number: 03-60 GieseckeEngineering Graphics, 8EPage Number: "Great Ideas Often Start as Freehand Sketches Made on Scratch Paper.Courtesy of ANATech, Inc. "

AABTKMG0


Figure Number: 03-61 GieseckeEngineering Graphics, 8EPage Number: Sketch on Graph Paper.

AABTKMH0


Figure Number: 03-62 a-d GieseckeEngineering Graphics, 8EPage Number: Types of Projection.

AABTKMI0


Figure Number: 03-63 a-d GieseckeEngineering Graphics, 8EPage Number: Technique of Lines (Enlarged).

AABTKMJ0


Figure Number: 03-64 a-c GieseckeEngineering Graphics, 8EPage Number: Contrast of Lines (Enlarged).

AABTKMK0


Figure Number: 03-65 GieseckeEngineering Graphics, 8EPage Number: Circle Viewed as an Ellipse.

AABTKML0


Figure Number: 03-66 GieseckeEngineering Graphics, 8EPage Number: Serif and Sans-Serif Lettering.

AABTKMM0


Figure Number: 03-67 GieseckeEngineering Graphics, 8EPage Number: Vertical Capital Letters and Numerals.

AABTKMN0


Figure Number: 03-68 GieseckeEngineering Graphics, 8EPage Number: Vertical Lowercase Letters.

AABTKMO0


Figure Number: 03-69 GieseckeEngineering Graphics, 8EPage Number: Inclined Capital Letters and Numerals.

AABTKMP0


Figure Number: 03-70 GieseckeEngineering Graphics, 8EPage Number: Inclined Lowercase Letters.

AABTKMQ0


Figure Number: 03-71 GieseckeEngineering Graphics, 8EPage Number: Pencil Lettering (Full Size).

AABTKMR0

REVERSE WITH INKING PEN336—

14—

532—

316—

18— 5

32—

332—

18—

Berol.RapiDesign.R-925LETTERING AID


Figure Number: 03-72 GieseckeEngineering Graphics, 8EPage Number: The Berol Rapidesign 925 Template is Used to Quickly Create Guidelines for Lettering.

AABTKMS0


Figure Number: 03-73 a-c GieseckeEngineering Graphics, 8EPage Number: Guide Lines for Dimension Figures.

AABTKMT0


Figure Number: 03-74 GieseckeEngineering Graphics, 8EPage Number: Common Errors.

AABTKMU0


Figure Number: 03-75 GieseckeEngineering Graphics, 8EPage Number: Centering Title in Title Box.

AABTKMV0


Figure Number: 03-76 GieseckeEngineering Graphics, 8EPage Number: Balanced Machine-Drawing Title.

AABTKMW0


Figure Number: 03-77 GieseckeEngineering Graphics, 8EPage Number: "Using Layout A-2 or A4-2 (adjusted), divide working space into six equal rectangles and draw visible lines as shown. Draw construction lines AB throughcenters C at right angles to required lines; then along each construction line, set off spaces and draw required visible lines. Omit dimensions and instructional notes. "

AACXFFX0


Figure Number: 03-78 GieseckeEngineering Graphics, 8EPage Number: "Using Layout A–2 or A4–3 (adjusted), divide working space into six equal rectangles, and draw lines as shown. In first two spaces, draw conventional lines tomatch those in Fig. 3.9. In remaining spaces, locate centers C by diagonals, and then work constructions out from them. Omit the metric dimensions and instructional notes.

AACXFFY0


Figure Number: 03-79 GieseckeEngineering Graphics, 8EPage Number: "Using Layout A–2 or A4–2 (adjusted), draw views in pencil as shown. Omit all dimensions. "

AACXFFZ0


Figure Number: 03-80 GieseckeEngineering Graphics, 8EPage Number: "Using Layout A–2 or A4–3 (adjusted), draw figures in pencil as shown. Use bow pencil for all arcs and circles within its radius range. Omit all dimensions. "

AACXFGA0


Figure Number: 03-81 GieseckeEngineering Graphics, 8EPage Number: "Using Layout A–2 or A4–2 (adjusted), draw views in pencil as shown. Use bow pencil for all arcs and circles within its radius range. Omit all dimensions. "

AACXFGB0


Figure Number: 03-82 GieseckeEngineering Graphics, 8EPage Number: "Friction Plate. Using Layout A–2 or A4–2 (adjusted), draw in pencil. Omit dimensions and notes. "

AABTKNC0


Figure Number: 03-83 GieseckeEngineering Graphics, 8EPage Number: "Seal Cover. Using Layout A–2 or A4–2 (adjusted), draw in pencil. Omit dimensions and notes. "

AABTKND0


Figure Number: 03-84 GieseckeEngineering Graphics, 8EPage Number: "Geneva Cam. Using Layout A–2 or A4–2 (adjusted), draw in pencil. Omit dimensions and notes. "

AABTKNE0


Figure Number: 03-85 GieseckeEngineering Graphics, 8EPage Number: "Ratchet Wheel. Using Layout A–2 or A4–2 (adjusted), draw in pencil. Omit dimensions and notes. "

AABTKNF0


Figure Number: 03-86 GieseckeEngineering Graphics, 8EPage Number: "Shear Plate. Using Layout A–2 or A4–2 (adjusted), draw accurately in pencil. Give length of KA. Omit other dimensions and notes. "

AABTKNG0


Figure Number: 03-87 GieseckeEngineering Graphics, 8EPage Number: "Latch Plate. Using Layout A–2 or A4–2 (adjusted), draw in pencil. Omit dimensions and notes. "

AABTKNH0


Figure Number: 03-88 GieseckeEngineering Graphics, 8EPage Number: Prob. 3.12.

AABTKNI0



AABTKNJ0



AABTKNK0



AABTKNL0

aabtkjx0 - shandong university

Documents