and how they are used. hubs send data to all of the devices that are plugged into them. they have no...

16
And how they are used

Upload: eileen-hall

Post on 24-Dec-2015

214 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: And how they are used. Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports. Cost~$35

And how they are used

Page 2: And how they are used. Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports. Cost~$35

Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports.

Cost~$35 to over $500

Page 3: And how they are used. Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports. Cost~$35
Page 4: And how they are used. Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports. Cost~$35

Switches are a step above Hubs. This is because a switch does not flood all exit ports with the same data. Just the port that needs the message will receive the message.

Cost $15 to well over $3,500

Page 5: And how they are used. Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports. Cost~$35
Page 6: And how they are used. Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports. Cost~$35

Routers are smarter switches. They can be configured for better traffic flow. They work at the Layer 3 of the OSI model. Routers use the IP address destination to determine which port it will send out the packets. Routers have fewer ports than switches.

Cost $35 to over $1,000

Page 7: And how they are used. Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports. Cost~$35
Page 8: And how they are used. Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports. Cost~$35

Bridges use MAC addresses to forward traffic. They can be used to bring together two dissimilar LANs.

Bridges are very similar to Hubs and Switches.

Cost $30 to ~$3,000

Page 9: And how they are used. Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports. Cost~$35
Page 10: And how they are used. Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports. Cost~$35

Gateways connect your LAN to the outside world. This process can be handled by servers that could also acting in other rolls as well.

Cost $45 to over $1,600

Page 11: And how they are used. Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports. Cost~$35
Page 12: And how they are used. Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports. Cost~$35

Firewalls can either be software or hardware. This could be software on a router, or even on a computer. They could also be a separate device in the server room. These devices help to keep out unwanted intruders.

Cost $30-$4000+

Page 13: And how they are used. Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports. Cost~$35

The brick wall is

the “firewall” in

this picture.

This is one point

at which a

firewall can be

installed.

Example of a firewall

Page 14: And how they are used. Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports. Cost~$35

WAPs are devices on a network that enables the user to connect with the network with no cables. These can be easily installed. However, the security is not as strong as a wired network.

Cost: <$100-$5000+

Page 15: And how they are used. Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports. Cost~$35
Page 16: And how they are used. Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports. Cost~$35