back nine nine_quilt 1_patt… · a free project sheet not for resale finished quilt size: 47 x 62...
TRANSCRIPT
A Free Project SheetNOT FOR RESALE
Finished Quilt Size: 47” x 62”49 West 37th Street, 14th floor, New York, NY 10018
Toll Free: 800-294-9495fax: 212-679-4578
www.blankquilting.netPlease check our website for pattern updates before starting this project.
Back NineBack NineBack NineBack Nine Quilt 1
Skill Level: Advanced Beginner
Qui
lt D
esig
n by
Hei
di P
ridem
ore
Back Nine
Fabrics in the Back Nine Collection
Select Fabric from the Jot Dot Collection
Select Fabrics from the Urban Legend Collection
Finished Quilt Size: 47” x 62”
Quilt 1
Tossed Golf Carts - White1386-01
Golf Clubs - Gray1387-95
Golf Balls - White1388-01
Tossed Tees - White1389-01
Light Blue7101-11
Hunter7101-66
Royal7101-72
Charcoal7101-99
Charcoal9570-92
Stripe - Gray1390-95
Golf Panel - Green1391P-66
Page 1Back Nine Quilt 1
Cutting Instructions Please note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.
Fig. 2
Fig. 1
Block Assembly Note: Pay attention to the unit orientations when assembling various components.
Fig. 3
Materials1 panel Golf Panel - Green (A) 1391P-66⅓ yard Urban Legend - Light Blue (B) 7101-111 ¼ yards Stripe - Gray (C) 1390-95⅞ yard Urban Legend - Royal (D) 7101-72¼ yard Golf Clubs - Gray (E) 1387-95⅜ yard Golf Balls - White (F) 1388-01⅜ yard Tossed Tees - White (G) 1389-01⅓ yard Urban Legend - Charcoal (H) 7101-99⅓ yard Jot Dot - Charcoal (I) 9570-92⅞ yard Urban Legend - Hunter (J) 7101-66*3 ¼ yards Tossed Golf Carts - White (Backing) 1386-01
*Includes binding
Batting: 90” x 90” (Recommended: Air Lite® Colour Me 100% Cotton)
From the Golf Panel - Green (A):• Fussy cut (1) 21½” x 41-½” rectangle, centered on the panel.
From the Urban Legend - Light Blue (B), cut:• (2) 2” x 41 ½” WOF strips, piece as needed.• (2) 2” x 24 ½” WOF strips.
From the Stripe - Gray (C), fussy cut:• (2) 5 ¾” x 43 ½” LOF strips, each centered on golf carts. • (2) 2 ½” x 34” LOF strips, each centered on golf clubs. From the Urban Legend - Royal (D), cut:• (6) 3” x WOF strips. Sub-cut (72) 3” squares.• (2) 2” x 35 ½” WOF strips.• (3) 1 ¼” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ¼” x 47 ½” strips.
From the Golf Clubs - Gray (E), cut:• (1) 5 ½” x WOF strip. Sub-cut (4) 5 ½” squares.
From the Golf Balls - White (F), cut:• (3) 3 ½” x WOF strips. Sub-cut (17) 3 ½” x 5 ½” strips.
From the Tossed Tees - White (G), cut:• (3) 3 ½” x WOF strips. Sub-cut (17) 3 ½” x 5 ½” strips.
From the Urban Legend - Charcoal (H), cut:• (5) 1 ½” x WOF strips. Sub-cut (34) 1 ½” x 5 ½” strips.
From the Jot Dot - Charcoal (I), cut:• (5) 1 ½” x WOF strips. Sub-cut (34) 1 ½” x 5 ½” strips.
From the Urban Legend - Hunter (J), cut:• (3) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 60 ½” strips.• (3) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 47 ½” strips.• (6) 2 ½” x WOF strips for the binding.
From the Tossed Golf Carts - White (Backing), cut:• (2) 55” x WOF strips for the backing. Sew the strips together and trim to make the 55” x 70” back.
B
A
Trim blockto measure
23 ½” x 43 ½”AFTER addingFabric B border
BCenter Block
B B
Unit 2make 17
FH H
Unit 1make 17
GI I
1. Sew (1) 2” x 41 ½” Fabric B strip to each side of the 21 ½” x 41 ½” Fabric A panel. Sew (1) 2” x 24 ½” Fabric B strip to the top and to the bottom of the Fabric A panel to make the Center Block (Fig. 1). Trim the block to measure 23 ½” x 43 ½”.
2. Sew (1)1 ½” x 5 ½’ Fabric I strip to each side of (1) 3 ½” x 5 ½” Fabric G strip lengthwise to make (1) 5 ½” Unit 1 square (Fig. 2). Repeat to make (17) Unit 1 squares total.
3. Sew (1)1 ½” x 5 ½’ Fabric H strip to each side of (1) 3 ½” x 5 ½” Fabric F strip lengthwise to make (1) 5 ½” Unit 2 square (Fig. 3). Repeat to make (17) Unit 2 squares total.
Page 2Back Nine Quilt 1
Fig. 9
Fig. 10
Fig. 12
Fig. 11
Fig. 13
Fig. 8
Unit 3make 17
Unit1
D D
Unit 4make 17
Unit2
D D
Unit 5make 4
D
E
Fig. 4 Fig. 5
Fig. 7Fig. 6
4. Place (1) 3” Fabric D square on the bottom left corner of (1) Unit 1 square, right sides together (Fig. 4). Sew across the diagonal of the smaller square from the upper left corner to the lower right corner (Fig. 4). Flip open the triangle formed and press (Fig. 5). Trim away the excess fabric from behind the triangle ¼” away from the sewn seam.
5. Follow Figure 6 for the seam direction to add a 3” Fabric D square to the lower right corner of the Unit 1 square to make (1) Unit 3 square (Fig. 7).
6. Repeat Steps 4-5 to make (17) Unit 3 squares total.
7. Repeat Steps 4-5 and refer to Figure 8 for component identification, placement and seam direction to make (17) Unit 4 squares.
8. Place (1) 3” Fabric D square on the bottom right corner of (1) 5 ½” Fabric E square, right sides together. Sew across the diagonal of the smaller square from the upper right corner to the lower left corner. Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle ¼” away from the sewn seam to make (1) Unit 5 square (Fig. 9). Repeat to make (4) Unit 5 squares total.
Left SideBorder
Uni
t4
Uni
t3
Uni
t4
Uni
t3
Uni
t4
Uni
t3
Uni
t4
Uni
t3
Uni
t4
Uni
t3
Right SideBorder
Unit4
Unit3
Unit4
Unit3
Unit4
Unit3
Unit4
Unit3
Unit4
Unit3
Top BorderUnit
4Unit
4Unit
4Unit
4Unit
3Unit
3Unit
3Unit
5
Unit5
Bottom Border
Unit4
Unit3
Unit4
Unit3
Unit4
Unit3
Unit3
Uni
t5 Unit
5
9. Sew together (5) Unit 3 squares and (5) Unit 4 squares, alternating them from top to bottom, to make the Left Side Border (Fig. 10). Repeat to make the Right Side Border (Fig. 11).
10. Sew together (4) Unit 4 squares and (3) Unit 3 squares, alternating them from left to right. Sew (1) Unit 5 square to each end of the newly sewn strip to make the Top Border (Fig. 12 below).
11. Sew together (4) Unit 3 squares and (3) Unit 4 squares, alternating them from left to right. Sew (1) Unit 5 square to each end of the newly sewn strip to make the Bottom Border (Fig. 13 below).
©2020 Blank Quilting Corp.
Every effort has been made to ensure that all projects are error free. All the information is presented in good faith, however no warranty can be given nor results guaranteed as we have no control over the execution of instructions. Therefore, we assume no responsibility for the use of this information or damages that may occur as a result. When errors are brought to our attention, we make every effort to correct and post a revision as soon as possible. Please make sure to check www.blankquilting.net for pattern updates prior to starting the project. We also recommend that you test the project prior to cutting for kits. Finally, all free projects are intended to remain free to you and are not for resale.
Page 3Back Nine Quilt 1
Quilt Layout
Quilt Top Assembly (Follow the Quilt Layout while assembling the quilt top.)12. Sew (1) 5 ¾” x 43 ½” Fabric C strip to each side of the Center Block.
13. Sew (1) 2 ½” x 34” Fabric C strip to the top and to the bottom of the Center Block.
14. Sew (1) 1 ¼” x 47 ½” Fabric D strip to each side of the Center Block. Sew (1) 2” x 35 ½” Fabric D strip to the top and to the bottom of the Center Block.
15. Sew the Side, Top and Bottom Borders to the Center Block.
J
J
D DJ J
D
D
C
C Center Block
C
C
16. Sew (1) 1 ½” x 60 ½” Fabric J strip to each side of the Center Block. Sew (1) 1 ¼” x 47 ½” Fabric J strip to the top and to the bottom of the Center Block to make the quilt top.
17. Layer and quilt as desired.
18. Sew the (6) 2 ½” x WOF Fabric J strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.
19. Bind as desired.