bankruptcy sale kbk mechanical - … mea_06272013.pdfbankruptcy sale roto-die bender brake,...

1

EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS •

www.myequipauctions.com

farming division

construction division

industrial division

the weekly digital marketplace for construction auctions

INDUSTRIAL AUCTIONS

farming division


industrial division

the weekly digital marketplace for industrial auctions - June 27, 2013

www.SierraAuction.com

www.SierraAuction.com

KBK Mechanical7603 North 73 Dr. • Glendale, AZ 85303

Wednesday, July 17th • 9 AMDoors Open at 7am!

Preview: Morning of Sale • 7am-9am

No Buyers Premium

BANKRUPTCY SALE

Roto-Die Bender Brake, Compressors, Re-Bar Cutter, Wilder Workhorse Flanger,

Roper Whitney Shear, and More!

2

www.myequipauctions.com

Browse the publication page-by-page to view all

industrial auctions

- OR -Click below to go directly to the

region of your choice. Looking for a specific piece of equipment?

Use the search button located at the bottom of each page to directly link you to

the equipment you need.

INDEX

farming division


industrial division

South

Midwest

East

West

Online/International

farming division


industrial division

3

www.bidspotter.comwww.bidspotter.com

Auctioneer Event Information Auctioneer Event Information upcoming bidspotter auctions

Date DateCompass Auctions & Real Estate TVA & Other Surplus Equipment Chattanooga, TN 7/02/13 to 7/16/13Williams & Lipton Company Online Machinery & Equipment Auction 3775 East Outer Dr. Detroit, MI 7/08/13 to 7/17/13 Hilpipre Auction Company Finley Excavating 1240 Blairs Ferry Rd. Marion, IA 7/09/13 to 7/17/13Hilco Asset Sales Canada HT Metals, Ltd. 130 Snidercroft Rd. Concord (Toronto), ON 7/09/13 to 7/17/13Thompson Auctioneers Lan-Cay, Inc. 600 4th St. Carrollton, KY 7/09/13 to 7/17/13DSL Commercial Hightech Woodcraft, Inc. 475 Edward Ave., Unit 11 Toronto, ON 7/09/13 Cincinnati Industrial Auctioneers Hy-Matic Manufacturing 205 W. Ohio St. Kendallville, IN 7/10/13 to 7/17/13 Stuart B. Millner & Associates Michigan Steel 41148 W. Western Ave. Muskegon, MI 7/10/13 to 7/11/13 Tiger Remarketing Services Complete `Like New` Water Bottling Plant 1160 S. Railroad St. Corona, CA 7/10/13 Maynards Industries (1991), Inc. Community Health Partnership EastRidge Center Eau Clair, WI 7/11/13 to 7/17/13 Infinity Asset Solutions Huron Mold & Tool, Ltd. 15 Cope Ct. Guelph, ON 7/11/13 to 7/17/13

DSL Commercial Universal Printing 160 Whiting St. Ingersoll, ON 7/11/13 to 7/17/13Plant & Machinery, Inc. Texas Area Multi Location Auction 125 Airtex Dr. Houston, TX 7/11/1 to 7/17/13Aaron Equipment Company Pharmaceutical Packaging & Processing Equip. 1716 Airport Ct. Holland, MI 7/11/13 to 7/18/13Maynards Industries, Ltd. - Vancouver Johel Group of Companies Lake Cowichan, BC 7/11/13 to 7/18/13 Apex Auctions USA, Inc. Enclosures, Inc. Pullmax 32 Ton Press, Pullmax Tooling & Milling Machines 1570 Louis Ave. Elk Grove Village, IL 7/11/13Stuart B. Millner & Associates Bombardier Recreational Products 451 E. Illinois St. Benton, IL 7/16/13 to 7/18/13Maynards Industries, Ltd. - Vancouver Sawmill / Planer Mill formerly Weyerhaeuser 500 N. Custer St. Aberdeen, WA 7/16/13Machinery Network Auctions Large Capacity Injection Molding Facility 420 Douglas St. Mount Gilead, OH 7/16/13 Perfection Industrial Sales Patriot CNC 265 Buds Dr. Cowpens, SC 7/18/13Machinery Network Auctions Major Plastics Injection Molding Company 9900 Sierra Way Kernville, CA 7/18/13 Ashman Company Auctioneers & Appraisers, Inc. CNC Swiss Machine Shop 5456 S.E. International Way Milwaukie, OR 7/18/13

BidSpotter.com is real auctions as they happen; convenient, secure and just like being there.

Did you know? You can bid in real time as

the auctioneer calls the bids.

Bidding is simple and it’s all on your screen.

One click of your mouse is all it takes to bid.

Can’t be in front of your computer at that time? No problem, you can leave

bids any time before the lot is sold.

BidSpotter also has many other kinds of sales including Industrial

Machinery, Food Processing Equipment, Real Estate and Livestock.

Let's Do Some Business!www.BidSpotter.com

4

East

farming division


industrial division

http://www.bidspotter.com/forms/clientupcoming.php?clientname=132

LIVE ONSITE & WEBCAST AUCTIONSurplus to the Future Manufacturing Requirements of

BeaCon IndustrIesLocation: 549 Cedar Street • Newington, Connecticut 06111

"Worldwide Auctions & Appraisals Since 1947"Auction License #AU481

Thomas IndustriesGuilford, CT 06437

EMAIL: [email protected] Phone: 203-458-0709

Wednesday, august 14th • 10:30 aM (et)Inspection: Tuesday, August 13th • 9 AM - 4 PM & Morning of Sale

400,000 Square Foot, Multi-Million Dollar Machine Tool Auction, Including: CNC Machining & Turning Centers, Boring Mills, Machine Tools, Inspection Tooling, Plant Support Equipment, etc.

Bid Online At:

WWW.THOMASAUCTION.COM

• (New 2009) Hankook # VTC-160E CNC Vertical Turning/Milling Center

• (New 2004) Olympia # V-60L CNC Vertical Turning/Milling Center

• (New 2000) Okuma & Howa # VR-80 CNC Vertical Turning Center

• (New 1996) (4) Mori-Seiki # SL-65B CNC Turning Centers

• (New 2000) (2) Daewoo Puma # 450-A CNC Turning Centers

• (New 2001) (2) Daewoo Puma # 400-B CNC Turning Centers

• (New 2004) OKK #HM-80-S CNC Horizontal Machining Center

• (New 2008) Wenzel "X-Orbit" CNC Coordinate Measuring Machine (PC-Dimis Software)

• (New 2007) Zeiss "Prismo" # MP-5 CNC Coordinate Measuring Machine W/ Rotary Table Option

• (Retrofit with New Control) SNK #FSP-100V CNC "5-Axis" Vertical Machining Center

• (Rebuild & New Fanuc Control 2004) Toyoda #FHN-80T "5-Axis" CNC Horizontal Machining Center

• (2) Fellows # 36 Gear Shapers• Matsuura # MC-2000 "4-Axis" CNC

Vertical Machining Center• Brown & Sharpe # 7-10-7 "X-Cell"

Coordinate Measuring Machine• (9) Okuma # LH-50 CNC Turning Centers• Mori-Seiki # SL-7A CNC Turning Center• Okuma # LC-20 CNC Turning Center• (2) Okuma # LC-30 CNC Turning Centers• Okuma # LC-40 CNC Turning Center• Matsuura # MC-1000V-DC "4-Axis" CNC

Vertical Machining Center• Matsuura # MC-1000V CNC Vertical

Machining Center• OKK # MCV-500 CNC Vertical Machining

Center• Sundstrand # S-80 "5-Axis" CNC Vertical

Machining Center• Lucas # 42B-84 Horizontal Boring Mill

• Bullard 66" "Dynatrol" Vertical Turret Lathe

• Bullard 46" "Dynatrol" Vertical Turret Lathe

• Morando 47" Vertical Turret Lathe• (6) Excello Vertical Turret Lathes• American CNC Lathe, 34" x 108"• Micromatic Hone #5V-16• (5) Lapointe Broaching Machines to 240"

Stroke• Eldorado Gun Drill• Arter 30" Rotary Grinder• Monarch # VMC-150 Vertical Machining

Centers• Over (100) Cranes and Jibs• Caterpillar # 980 Rubber Tire Loader,

Caterpillar D-4E Bull Dozer, Forklifts, etc.• Large Selection of Tool Holders, Rotary

Tables, Chucks, Vises, etc.• Much More!! Check Back For Complete

Lot Catalog!!

LOT CATALOG, REGISTRATION & BIDDING AT:

Most CNC Machines

Available for Private

Negotiation Immediately!

Contact Auctioneer

New

2004 New

2009 New

2007

1 of 4

1 of 4

5

East

farming division


industrial division

http://www.bidspotter.com/forms/event.php?event=21354

www.Facebook.com/Infinity-Asset-Solutions-Inc

Follow Us at: www.Twitter.com/InfinityAssets

www.infinityassets.com

www.Twitter.com/InfinityAssets

Bid Live Onsite & Online Via

6

East

farming division


industrial division


www.bidspotter.com

www.cia-auction.com

7

East

farming division


industrial division

Over 30 Years Experience in IndustrialAuctions and Appraisals

w CRG provides industrial asset valuation and disposition services worldwide.

w Asset Recovery/ Disposition Services:

w Independent Appraisal Division: • All appraisals meet or exceed USPAP standards • Approved by all major commercial banks, asset

based lenders and Fortune companies

For more information, please contact us:

www.crgauction.com(800) 300-6852

• Orderly Liquidation • Outright Purchase• Onsite Auction Sale

• Onsite Auction with Global Webcast Sale

• Online Only Auction• Private Treaty Sale

8

South

farming division


industrial division

www.cia-auction.comwww.myronbowling.com


9

South

farming division


industrial division

Machine Shop LiquidationSaturday, July 13th • 9 AM

INSPECTION: Friday, July 12th • 9AM - 4PMLOCATION: 241772 CR 121 • Hilliard, FL

• DTS Dynamometer - new and complete, never used

• Sunnen Precision Honing Machine

• Sunnen CK 10 Cylinder Machine• Sunnen CH100 Honing Machine• Sunnen Gage Setting Fixture• Berco Boring Bar• Simtest QT90 Engine Test

Station• Kansas Instruments Blast

Cabinet• (3) Storm-Vulcan Cabinet Block

Cleaners• L-Tec Wire Welder• 15 HP Ind Air Compressor• AC Recovery Unit• Toledo Platform Scale• Pancake Compressor• Engine Stands• Jacks

• Several Tool Chests and Tools• Bench Grinders• Parts Washers• Pallet Jacks• Metal Saws• Overhead Cranes• Vise• Drill Presses• Engine Hoists• Transmission Jacks• Shelving• Bolt Bins and Contents• Numerous Air Tools• Battery Chargers• Honing Plates• Table Saw• Dozens of Reconditioned

Engines• Pallets of New Bearings, Oil

Pumps, Rods, Pistons, Gaskets, Etc.

• Steel Work Tables• Pallets of Crankshafts• Engine Blocks and Heads• '64 Ford Falcon 2dr HT, AT, V8 -

classic - runs good• '86 Pontiac Fiero - collectible -

runs - original• Ford Dexta Diesel Tractor• 6' Rotary Mower• 6' Taylor Way Disc Harrow• Fertilizer Spreader• Nissan 5,000 lb Forklift - 3 stage

w/side shift - LP• All-Pro Tilt Bed Car Hauler• Parts Cars• Utility Trailer• Yard Trailer• Rollers• Jack Stands• Banding Machine• Much More!

TERMS: Cash, Approved Check, Visa/MC, Sales Tax Will be Collected, 10% Buyer's Premium.

904-529-7525 or 904-699-7067 • FAX: 904-529-7762PO Box 637, Penney Farms, FL 32079

[email protected] • www.elrodauctions.com

Machine Shop AuctionMONDAY, JULY 8Th • 11:00 AM

Estate of William D. Morris DBA Mor-Fab Machine Shop

Deason Road • Rogers, AR 72756

Welders • Plasma Cutter • ToolsMachine Shop • Fabricating Machinery

Misc. Machinist Tools & More!TERMS & CONDITIONS: Cash or Check. No credit cards will be accepted at this sale. All Sales Final. Items Sold ‘As Is’. Nothing removed until settled for. Not responsible for accidents, illness, injury or lost articles. All announcements made day of sale supersede any previous advertisements. Restrooms available. 10% Buyer’s Premium.

Larry W. Barnes, AuctioneerAALB #1545

(479)633-3450 • www.barnes4stateauctions.com

Directions: From Rogers at intersections of Highway 62 and Highway 94, take Highway 62 North (towards Avoca) for approximately 1 8/10 miles to Morsani Drive (by Wheeler Metals). Turn Left onto Morsani Drive and then immediately turn Right on Landers Road. Take Landers Road for 2 1/10 miles to Right on Deason Road. Follow Deason Road 2/10 mile to auction location. Watch for "Barnes 4 State Auctions" signs.

Go to www.barnes4stateauctions.com for photos and complete list

https://www.proxibid.com/asp/Catalog.asp?aid=67773

1894 Sylvester Hwy. • Moultrie GA 31768TX #17289 – AB1285

800-985-5699www.demottauction.com

Tractors, Construction, Vehicles & Trailers

SaTurday, July 27th

9:00 a.M. 7960 ST HWY 35 N. • BAY CITY, TX

Terms & Conditions: Payment in full for all purchases is required on auction day in the form of cash or cashier’s check, personal or company check must be accompanied by a current original bank letter of guarantee, prior letters and or bank statements are unacceptable documents. NO EXCEPTIONS! NO CREDIT CARDS! Auctioneer cannot verify checks.

Titles: A processing fee will be charged for all title work; titles will be processed & mailed to buyer after auction. Note to auto dealers: You must bring a copy of your dealer’s license.

“AS IS Where IS” Payment BY CASH OR CHECK ONLY - NO CC. ONLINE BUYER FEE IS 4% PLUS THE ONSITE % FOR $ BRACKET

uPCOMING auCTION

Keep Checking www.demottauction.com

or www.proxibid.comfor an updated Catalog & Photos!

10

Midwest

farming division


industrial division


ONE OWNER EQUIPMENT AUCTIONFINLEY EXCAVATING

1240 BLAIRS FERRY RD. • MARION, IA

TUESDAY, JULY 9 • 10:00 AMBoB Finley, AFter 65 yeArs in the dirt moving Business,

hAs decided to discontinue operAtions.

lAthe: Alta metal, model QC54, 12”swing s/n 087915; South Bend, QCG, 20” C to C, 3-jaw chuck, 10” swing , W/cabinet; Sheldon metal, QCG, 30”, 3-jaw chuck, 6”swing3 BAr roll: 6’x6”, manual Air compressor: Worthington portable, model 85 s/n 1669, Continental 6-cyl. Gas engine iron WorKer: Marvel #28 iron worker/notcher press: Dake H-frame, aprox.50-75-ton chop sAW: Elect. Masonry cutting tABle: Camograph, model #42, s/n 598 Welders: Miller 250 syncrowave tig, s/n KH836150 w/cooler, foot control; Hypertherm power max 1100 plasma cutter, s/n 1100-015385; Dayton spot welder Wet stone: 20” elect. const. eQuip.: Late Model – High Quality liKe neW eQuip.: Excavators; Backhoe; Wheel loader; Crawler / Loader; Skidloader; Road Grader; Tractors; Truck Tractor; Dump trks; Service Trks; Other like items.

SEE OUR WEBSITE FOR LISTING & PICTURES WWW.hILPIPRE.COM

HILPIPRE AUCTION COWATERLOO, IA • 319-235-6007

TERMS: Cash or letter of credit from your bank. Buyers Premium applies: Onsite 10%; Webcast 13%.

LIVE ONSITE & LIVE WEBCAST BIDDING!!

11

Midwest

farming division


industrial division


Looper

Online & Onsite AuctionTHuRSdAY, JuLY 25TH • 10:00 AM

5104 SOuTH 34TH STREET • FT. SMITH, AR

B&M Metal Fab & Welding Shop

LIquIdATING ALL EquIPMENT, SuPPLIES, TOOLS, TRuCkS, ETC. MOST OF EquIPMENT

DON`T MISS THIS SAle!

Auction & Realty, Inc.

ONLINE BIddING AvAILABLE THROuGH

JIMMY LOOPER • AR LICENSE #35 (479) 996-4401

SHAWN LOOPER • AR LICENSE #36 (479) 996-4848

www.looperauction.com5% Buyers Premium

12

Midwest

farming division


industrial division


STRUCTURAL STEEL FABRICATING PLANT300,000 sqft., Bridge Building Facility

PDM Bridge • 329 2nd St. • Proctor, MN 55801

CLOSING MONdAY, JuLY 15TH • 5 PMINSPECTION: Friday, July 12th • 9AM to 6PM & Monday, July 15th • 9AM - 4PM

• Ficep 1204 DZTT CNC Drill and !ermal Coping Linec w/ Robot Option

• Ficep CNC Saw & Drill Line 2009 1045 BH Band Saw,

• 2008 Ficep1101 DZB Drill• Ficep A 152 CNC Angle/Punch/

Shearing Line• Ficep TIPO B15 CNC Punch, Drill,

Plasma Cutting Line

• Autoblaster 6 Wheel Structural Cleaning Machine

• Messer MPC 2010 CNC Plate Cutting System

• Piranha Pro2 Press Brake, 12’, 200 Ton• Assorted Fabrication & Machining

Equip.• Welders, Air Compressors• Dust Collector Systems

19150 Territorial Road Osseo, MN 55369 Fax: 763-428-8355

Toll Free: 888-671-7640 Phone: 763-428-2271www.auctionmasters.com

MATERIAL HANDLING• Forkli"s: Hyster, Caterpillar and Combieli" 4,000 lb to 33,000 lb• Bridge & Jib Cranes• Rigging Equipment

TRACTORS, TRAILERS• 99 & 96 Kenworth Tractors• 99 & 93 Aluminum Flatbed Trailers

48’ & 45’• 89 Flatbed Stretch Trailer, 48’- 64’• Asst. TrailersQUANTITY OF SCRAP METAL

ONLINE AUCTION

Auction in conjunction with: Used Machinery Sales - Elk River, MN

BID ONLINETHROUGH:

13

Midwest

farming division


industrial division

[email protected]


11 locations-TX & OK Auction-IMT - 3 7/16 x 9 13/16

P.O. Box 19100 • Houston, TX 77224Fax (713) 672-7905 • E-mail: [email protected]

For a free brochure call 713‑691‑4401or www.pmi‑auction.com

HUGE PUBLIC AUCTION!

11 LOCATIONS INTEXAS & OKLAHOMA

500+ LOTS OF MACHINE TOOLS,FAB, ROLLING STOCK & MORE Theater Style Digital Color Slide Auction to be

Conducted Off-Site at the

HOLIDAY INN EXPRESS & SUITES125 Airtex Drive • Houston, Texas 77090

THURSDAY, JULY 11 • 10:00 A.M.

OVER 80 MAJOR MACHINE TOOLS AS NEW AS 2008: Incl. (9) CNC Vert. & Horiz. Boring mills • (6) Vert. & Horiz. Boring mills • (4) Port. Boring & Facing machines • (14) CNC & Manual Lathes • (2) Keyseaters • (2) Hi-speed Vert. Gear Hobbers • (4) Radial drills • (4) Thread Millers • (13) Vert. & Horiz. Mills • (10) Saws • (15) Grinders • (4) Hones • Accessories & ToolingHUGE QUANTITY FABRICATING EQUIP. AS NEW AS 2011: CNC Laser Cutting Center • CNC Oxy-fuel Flame Cutter • (4) Hyd. Pressbrakes • CNC Beam Processing equip. • 4" cap. Pipe Benders & tooling • (4) Ironworkers • CNC Fab Punch • (3) Plate & Angle Rolls • Tube End Former • (6) Presses • (4) Port. Plasma cutters • Portable Welder • (90+) Welders as new as 2011 PRODUCT TREATING & TESTING: Car Bottom Stress Relieving Furnace • Heat Treat Furnace • Shot Blast Machine • Sandblast room/system • Vibratory Finishers • 30" Comparator • C.M.M. • Q.C. equip. • MorePLANT SUPPORT EQUIP. AS NEW AS 2009:(5) Rotary Screw Air Compressors • (5) Port. Hyd. Power units • Port. Pressure testing skidMATERIAL HANDLING EQUIPMENT AS NEW AS 2011: 50 Ton Cap. Lattice Boom Truck Crane •(18) Forklifts: (2) Diesel up to 35,000 lb. • (14) LPG • (2) Elec. Forklifts incl. Swing-Mast Narrow Aisle • MoreROLLING STOCK AS NEW AS 2011: (3) Truck tractors • Roll-off truck • (5) Trucks: Flat bed, Pick up, Weld-ing bottle • (3) Trailers incl. 48' aluminumWAREHOUSE & SHOP SUPPORT EQUIP.: Huge Quantity Platform Carts & Stock Trucks • Floor Scrubber • Storage Racks • Hoppers • MoreALSO ‑ AVAILABLE FOR PRIVATE NEGOTIATION ‑ CNC HORIZONTAL TABLE TYPE BORING MILL: G&L 6" Mdl. G60T. See brochure for details

BUYER'S PREMIUM: 13% Onsite, 16% WebcastINSPECTION: Mon. thru Wed., July 8, 9 & 10, 9 a.m to 4:00 p.m.AUCTIONEERS: Bob Braman, TX Lic. #6362, Ron Moore, TX Lic #7314 PAYMENT TERMS: Cash, Cashiers Check, Wire transfer OR Company Check with letter from bank guaranteeing payment to PMI.

Bid on‑site or bid via

14

Midwest

farming division


industrial division

auCTIONuNION PACIFIC RAILROAd

SuRPLuS EquIPMENT

TuESdAY, JuLY 16TH • 9 AMHeld at union Pacific (Jenks Facility)

800 PIkE AvENuE • NORTH LITTLE ROCk, AR 72114

• Golf carts• Cushman Buggies;• Floor Sweepers• Forklifts: Caterpillar, Hyster, Yale, Toyota, &

Crown• Work Platforms• Ladder / Platforms• Bead Blaster• Rolling toolboxes• Welders: Miller & Lincoln• Crane: .5 Ton• Wagon Parts• Oil Coolers• Running Gears• Tarps• Aluminum Cages• Auger System• Dumpsters

• Air Compressors: Atlas, Kaeser• Traction Motor Combos• Crab Bolts• Rebuild Bearing Kit• TRUCK FRAMES: GP38,

GP60, Clasp, Morphid, 90MAC, GE8, SD-60, 70ACE, SD-40, Car, GE FLEX, -7, SLUG

• Alternator Rotors• Diesel Engines, 16 Cyl• Traction Motor Frames: E8, D87, AF• Locomotives: UP8921,

UPY138• Turbos 498• AND MUCH MORE!!

EquIPMENT TO BE SOLd:

Adam’s Auction & Real Estate Services, Inc., Its Employees and the Owner of the Equipment to be auctioned Make No Guarantee as to the Accuracy of the Descriptions in this Advertisement. It is the Buyer’s Responsibility to Determine the Correct Information, Including but Not Limited to Make, Model, Year, Condition, Etc.

5% Buyers Premium. Any Announcement Made Day of Sale Takes Precedence Over Any Printed Material.

120 W. Main St. • Belleville, IL 62220

Toll Free: 877-566-8751Office: 618-234-8751

Fax: 618-234-8604Adam Jokisch, Auctioneer

618-530-8751

www.adamsauctions.com

IndustrIal EquIpmEnt auctIonSaturday, June 29th • 10:00 a.m.

Doors Open 8:00 a.m. • Preview Day Before 9:00 a.m. - 4:00 p.m.216 West 1st Street • Story City, Iowa

aaron dowell auction companyAre You Ready To Sell? Call Us Today!

Toll Free 1-855-288-7355www.AuctionOffIowa.com

Airlift Machine, Econoline Bead Blaster, Dynaric Manual Nylon Strapping machine, Iron Worker (cuts angles & punches steel), Hot Glue Machine, Pipe & Bolt Threader Machine, Cardboard Bailer, Dock Levelers, Club Car Golf cart, Custom made Drink Cooler made from the front end of a Ford F-150 Super Duty, 2 forklifts, 36ft Enclosed Trailer Model J36 JN, 1998 GMC P3500 (3 TON) Box Truck with Lift Gate, 1989 International Semi Truck, Dorsey Semi Trailer, Niagara Press Brake (8ft), Dreis & Krump Press Brake (8ft), AEM Multi Directional Deburring Machine, #14 Diamond Punch Press, Linear Buffer Machine, 10 Large Porta Cool Fans, 5 Miller Welders: (2) CP-200(S), CP-200, Syncrowave 351 & 350LX, Colorado LS Truck Bed, Numerous other truck beds & Fenders, Several Metal Baskets/Bins, Vintage Multi Drawer Filing Cabinets, Several Metal Rollers, Lots of Miscellaneous items. See Full terms & Photos at www.AuctionOffIowa.com

www.WoodEquipAuction.com

• Woodworking Machinery• Tooling • Raw Material• Finished Product

• Pallet Rack • Forklifts • Snow Plow • Vans • Office Assets

AUCTION

512-261-3838WoodEquipAuction.com

&

State of the Art Cabinet Manufacturing Facility

2455 South 3600 - West Valley, UT 84119

Classic Cabinets Division

TUESDAY, JULY 9 Inspection 9 am – 4 pm, Monday, July 8

Doors Open at 8 am

Onsite/Online Auction

15

West

farming division


industrial division


Main Client sectors serviced

Montgomery Auction Services Ltd. Blackfalds, Alberta 1-800-371-6963 • 403-885-5149

www.montgomeryauctions.com

MONTGOMERYAUCTION SERVICES LTD.

MACHINE SHOP EQUIPMENT: Selling @ 12 Noon Live on Site & via www.bidspotter .comMasteel MBH 12185, Hyd. Brake, NC MS200 Control -12 ft – 185 Ton w/ 6 Way Bottom Dies,Top PunchGurutzpe Timemaster Super AT 18-44 Gap Bed Engine Lathe w/Tooling – 33” Swing, 42” in Gap, 32” 4 Jaw Chuck, 120” Bed, 10” Spindle Bore, Taper Attachment, Extra ChucksZMM Sofia CU-582 Engine Lathe w/ Tooling – 80” Bed, 22” Swing, 2 ¾” BorePearson Hyd, Metal Shear – 10 Ft x 10 Ga . M.SSMALL TOOLS & MISC: Talon 300-75C ¼”-3” Drill Bit Sharpener, ITC Floor Model5/8” Drill Press, Bench Drill Press, Comet 8” Bench Grinder w/HD Pedestal, Sears8” Grinder w/ Pedestal, Auto-Start Pedestal Buffer/Wire Wheel, Housfeld Flat BarBender w/Bending Dies, 16’ Jib Crane w/ 1 Ton Chain FallWELDING & PLASMA: Selling @ 12 Noon Live on Site & via www.bidspotter.comLincoln Ranger 305G 300DC Portable Welder /Power Source w/Cables & SkidLincoln Idealarc R3R-400 DC Arc WelderMiller Syncrowave 250DX Tig /Stick Welder w/ Water Cooled Tig Torch, Square WaveFORKLIFT: Toyota 2FG-20 4000Lb Forklift Truck w/ Pneumatic TiresTRAILER: 2009 Oasis 14,000Lb T/A Equipment Trailer w/ Ramps

WELDING & MACHINE SHOP DISPERSAL

AUCTIONRTM WELDING & MACHINE

5307 - 50 Ave. • Provost, AlbertaWednesday, July 24, 2013 @ 10 AM

16

West

farming division


industrial division

www.murphyauction.com

International/Online

17

farming division


industrial division


www.Facebook.com/Infinity-Asset-Solutions-Inc

Follow Us at: www.Twitter.com/InfinityAssets

www.infinityassets.com

www.Twitter.com/InfinityAssets


18

farming division


industrial division

onLIne onLYa-Z MaChIne PROduCts, InC.

Begins: Wednesday, June 26th • ends: Wednesday, July 10th • 10 aM

WGLENN A.

INTERNITZ LLC

INDUSTRIAL AUCTIONEERS & APPRAISERS4055 W. Peterson Ave. Ste 206 • Chicago, IL 60646

P. 773-290-1827 • F. [email protected]

BID LIVE ONLINE AT: ®

www.winternitzauction.com

• ACRA MODEL CS-G450A VERTICAL MILL• SUPERMAX MODEL YCM-2GS VERTICAL MILL• CLAUSING KONDIA TYPE FV-1 VERTICAL MILL• LAGUN MODEL FTV-2 VERT. MILL W/ CRUSADERII• VDF 18 X 84 MODEL 44S ENGINE LATHE• CLAUSING METOSA MODEL C1565LC LATHE• CLAUSING METOSA MODEL C1545SS LATHE• LEBLOND 13 X 38 ENGINE LATHE• HARDINGE MODEL HLV-H LATHE• ELB 14 X 23 SW6VA1 HYD. SURFACE GRINDER• BOYAR-SCHULTZ CHALLENGER H612 GRINDER• DOALL 16” VERTICAL BANDSAW• SUNNEN MODEL MBB-1290D HONE• BARBER-COLMAN NO. 3 GEAR HOBBER• CLAUSING VARIABLE SPEED DRILL PRESSES• PLUS TOOLING, MACHINE ACCSEESORIES, ETC.

FE

AT

UR

ING



19

farming division


industrial division


SchneiderINDUSTRIES, INC.Complete Investment Recovery Programs.

SURPLUS FLUID BLENDING AND PACKAGING EQUIPMENT FROM THE ON-GOING OPERATIONS OF:

U.S.A. OFFICESchneider Industries

3010 Locust St. , Suite 103St. Louis, MO 63103

Phone: 314-863-7711 • Fax: [email protected]

MEXICO/LATIN AMERICA OFFICEOficina para México

y América LatinaMonterrey, Nuevo León, México.

Tel: (55) [email protected]

www.schneiderind.comVisit Our Website for Full Inventory Listings:

If you have or know of surplus assets, please give us a call for a no cost consultation 314-863-7711 or email [email protected]

Begins: Friday, June 28th • 10:00 AM CDTEnds: Tuesday, July 23rd • 10:00 AM CDT

Location: 311 B Avenue • Grundy Center, Iowa 50638

Inspection By Appointment Only - Monday through Friday from 9:00 AM to 3:30 PM. For Appointment Call Dan at 314 863-7711 or Email [email protected]

ELM• Goulds Pump /w 30 HP Motor, 230/460 Volt• Goulds Pump /w 15 HP Motor, 230/460 Volt• Goulds Pump w Approx. 15 HP Motor, 230/460 Volt• Goulds high pressure centrifugal pump, model CN 50-250 1185, 25 HP 2

1/2” flanged inlet, 2” flanged outlet• Goulds model 3196 mild steel centrifugal pump, model 3196, serial

number 759D575, 4”x3”, 10” impeller, 75hp 3570rpm direct motor drive, skid mounted

• Tri-Clover 3EHMES centrifugal pump, 15hp, 1160rpm, stainless steel contact, 4” inlet / 3” outlet with stainless steel check valve, threaded fittings, mild steel base. It comes with a 15 HP US Electric Motor with nominal Voltage rating of 240/480 and 1160 RPM

• Durco 40 HP SS pump 4” Inlet and 3” outlet• Warren Rupp 125 psi Stainless Steel Diaphragm• 2” Viking pump, model KK125, serial number 6416103, originally sold and

serviced by Coker Pump, mild steel, 2” NPT inlet and outlet, new condition• 3” Viking Pump run with a Viking gear box and 5HP Electric motor• Travaini vacuum pump, serial number AD990 J1PXU, type number TRSC

40-100/C/A3, 1 ½” inlet/outlet, mild steel frame• Scotch-3M model 28600 top and bottom case taper, type 77A, serial

number 5080, top and bottom powered case belts, adjustable.• One Pallet (2) Landa Model: SEA42000, Platinum Series High Pressure

Washers• One Southworth Pallet Lift• Spiroflow Bag Hopper and Merrick Feeder Model HRD3005 S/N

806002/50010Z• Meyer Auger Feeder Model HF-12/45 S/N 970• Garvey Accumulation Table Model 9600/970 S/N 14609/10/11• Miller Hydro Drop Packer Model RGOF S/N RGOF333 Lynch/Miller Hydro• Metal Craft air operated barrel tipper drum tipper drum lifter• Pneumatic Barrle Lift / Barrel Tipper on casters heavy durty• MORSE 650LBS. CAP. MOBILE HYDRAULIC Barrel Tipper -Barrle Lift -

Barrel Dumper• Protema 830 Film Lift• AVERY ALS230L LABELER• Avery/Durag DS 152 Mobile Dual Head Labeler• Nito FB10X Mobile Vibratory Hopper

• AMTECH ST40 ULTRASONIC TUBE SEALER• Pharma Quality Bundler -Serial # 9350 - Esitmated weight 1000 lbs, width

53”, height 85”, and length 85” - 480 Volt• Hoopmann FT40 Centrifugal Feeder S/N 08700-02-2325• Intersleeve Stainless Steel Shrink Labeler 3ft x 2.5 ft and 7 ft height• KEI model 131 O-3 15 HEPA air filter, serial number 31384B, 1-½ HP fan, 2 removable Riga-flo 200 filters 24” x 24” x 12”• KEI model 1310-3 HEPA air filter, serial number 14538, 1-½ HP fan, 2

removable Riga-flo 200 filters 24” x 24” x 12”• Expanding skate conveyor, 16” wide by 5 feet closed, 34” tall, casters• SS 45 degree roller conveyor - food grade quality• ABDICK Videojet Model 9100 Inkjet Coder, S/N 82K2006 1• EXA 2500 Pharma quality label printer applicator with laser scanner• CMP 102” Long x 15” Wide S/S Frame Product Conveyor, w/ 90° Turn,

Drive, and Vacon X-Series VFD• 200 HP Colloid Mill, Homogenixer, emulsifier• Tote of Index screws and change parts for filler and other misc.• Metler Toledo Stainless Steel Check weigher with conveyors 1196 and

Domino coder• (2003) Modern Welding 1100 gallon stainless steel jacketed tank with

sweep agitation -- Max Working Pressure 30 PSI at 200 F -- Min. Design Metal Temp -20F at 30 PSI on four I-Beam Legs - comes with a 10HP and 5HP drive motor currently a 5HP is used

• Patterson Stainless Steel Kettle with 3-zoone steel jacket and 15HP main drive and 5HP center drive with SEW Gear Drives on four legs with a number of inlet and outlets on dome top and dome bottom

• Horix Stainless Steel 12 head inline filler - 13 ft lone, 6 ft wide, 8 ft height• SS 18 ft x 40” Accumulation Table with 6 1/2 feet of 4 1/2” SS conveyor on

sownstream with its separate drive• Fogg 26 head Stainiless Steel gallon filler with change parts and 4 1/2”

feed conveyor, 9 ft wide, 8 ft height, 16 ft length including feed conveyor• Sterlco Model F6016 - MX, Series 400 - 6kW per head• Pneumatic Scale 8-Head In-Line Liquid Filler 7ft x 5ft x 7ft• Unused stainless steel 6 ft x 14 ft SS Hood - 32” tall at center• Two head Grease Tube/cartidge Piston Filler with automatic cartridge

feeder and lid closer• MUCH, MUCH MORE!

ONLINE ONLY AUCTION


20

farming division


industrial division

www.perfectionindustrial.com

VERY LATE MODEL MAZAK CNC MACHINING & TURNING FACILITY

SALE DATE:LOCATION:INSPECTION:

Thursday, July 18, 2013 at 11:00 AM ET265 Buds Drive, Cowpens, SC 29330Wednesday, July 17, 2013 9:00AM to 4:30PM ET

FEATURING: (2) 2011 & 2008 MAZAK NEXUS 6000 II 4-AXIS CNC HORIZONTAL MACHINING CENTERS, 2010 MAZAK NEXUS 5000 II 4-AXIS CNC HORIZONTAL MACHINING CENTER, (2) 2008 TOYODA FH550R 4-AXIS CNC HORIZONTAL MACHINING CENTERS, 2007 MAZAK NEXUS 510C/50-II VERTICAL MACHINING CENTER, (2) 2008 MAZAK QUICK TURN NEXUS 250-II CNC TURNING CENTER. ALSO: G&L CORDAX CMM + INSPECTION EQUIPMENT & TOOLING; PWB ROYAL TOOL PRESET-TER; ATLAS COPCO AIR COMPRESSORS; OVER 1200 V FLANGE TOOL HOLDERS; PERISHABLE TOOLING; SURFACE GRINDER; BANDSAWS; MILLING MACHINES; ENGINE LATHE; SHOP PRESS; GORBEL CRANE AND JIBS; DUMPING

SCRAP HOPPERS; SHOT BLAST CABINET; TOYOTA 2600 LB ELECTRIC FORKLIFT

IMMACULATE "AS NEW" PRECISION CNC MACHINING FACILITY AS LATE AS 2011

FEATURING: 2011 MAZAK QUICK TURN NEXUS 350MY-II / 2000U CNC LATHE; 2011 MAZAK QUICK TURN NEXUS 250-IIM / 1000U CNC LATHE; 2010 HURCO VMX60SR 5-AXIS CNC VMC; 2010 MARVEL SERIES 8 MARK II VERTICAL SAW; 2010 MITUTOYO CYSTA-PLUS

M7106 CMM; 2011 FORD F350 XLT 4X4 SUPER DUTY, POWER STROKE TRUCK; 10,000LB HYSTER 100 LP FORKLIFT

Sale in conjunction with:


Tuesday, July 23, 2013 at 10:00 AM CT1500 Scottsdale Ct. Suite #100, Elgin, IL 60123Monday, July 22, 2013 9:00AM to 4:00PM CT

[email protected] www.perfectionindustrial.comTel: 866.311.2807

2 LIVE WEBCAST AUCTIONS

[email protected]



21

farming division


industrial division


www.pressbid.com

online PUBLIC AUCTIONonline PUBLIC AUCTION

Complete Bradbury “DTR” Cee & Zee Purlin LineDouble-Wide Telescoping Rollform Line

Rollformer & Cut Off PressLocated in

Tualatin, Oragon

Feed Equipment, Conveyors & Controls

Located in Ferndale, Michigan

NEW1998Bidding is Open Now!!!Bid Closing: July 23, 2013, 12:00 Noon Eastern Standard Time

Go to

to view full catalog, photos,terms & conditions

and to register & place bids

Bidding is Open Now!!!Bid Closing: July 23, 2013,

12:00 Noon E.S.T.

Complete Manual, Schematics, Line Layout and Tooling Drawings Available

Inspection by appointment only:Tristan Patrona cell: 248-496-5176 • Phillip Patrona cell: 586-612-3022

Pressbid Auction, LLC22778 Macomb Industrial Drive • Clinton Township, Michigan, 48036

tele: (586)569-0150 • fax: (586)569-0103www.pressbid.com

online PUBLIC AUCTIONonline PUBLIC AUCTION

Complete Bradbury “DTR” Cee & Zee Purlin LineDouble-Wide Telescoping Rollform Line

Rollformer & Cut Off PressLocated in

Tualatin, Oragon

Feed Equipment, Conveyors & Controls

Located in Ferndale, Michigan

NEW1998Bidding is Open Now!!!Bid Closing: July 23, 2013, 12:00 Noon Eastern Standard Time

Go to

to view full catalog, photos,terms & conditions

and to register & place bids

Bidding is Open Now!!!Bid Closing: July 23, 2013,

12:00 Noon E.S.T.

Complete Manual, Schematics, Line Layout and Tooling Drawings Available

Inspection by appointment only:Tristan Patrona cell: 248-496-5176 • Phillip Patrona cell: 586-612-3022

Pressbid Auction, LLC22778 Macomb Industrial Drive • Clinton Township, Michigan, 48036

tele: (586)569-0150 • fax: (586)569-0103www.pressbid.com


22

farming division


industrial division


FORMER ASSETS OFCORE SYSTEMS, L.L.C.

SALE DATE: July 16th • 10:00 AM (ESt)LOCATION: MT. GILEAD, OHINSPECTION: BY APPOINTMENT ONLY.

Please contact Steve kleba at +1.847.427.0747 or via email at [email protected]

FEATuREd ITEMS:

• INJECTION MOLdING dEPARTMENT - (24) TOSHIBA, VAN DORN, MITSUBISHI, CINCINNATI MILACRON, NISSEI & MIR horizontal and vertical injection molding machines up to 1,000 ton capacity with robotic load/unload systems, vacuum loaders, dryers, temperature controllers, blenders and more.

• Bridge Cranes - Fully Serviced Warehouse of (2) 10 Ton Bridge Cranes

• Granulators - (16) Large Capacity Granulators up to 30HP

• Water Treatment - Complete System to Include Water Tower, Recirculation Pumps and System, Cooling Towers, Chillers, Condensers, Manifolds, Fittings, etc.

• Nitrogen Gas System - Complete System to Include Nitrogen Compressors, Cylinder Racks, Touch Screen PLC Control

• Inspection Equipment - Coordinate Measuring Machine, Probes, Testers, and Various Hand Held Measuring Tools

• Factory Support Equipment - (4) Rotary Screw Air Compressors up to 50HP, Air Dryers, Toolroom and Maintenance Shop Equipment, (7) Forklifts up to 13,500 Lbs. Capacity, Pallet Racking, and more.

• Office - Professionaly Furnished Including All Computers, Servers, Phone System and Business Machines

• Warehouse Capacity - Warehouse Ceiling 14' - 26' Clearance, (6) Dock Level and (2) Drive-in Access Doors

VERY LATE MODEL MAZAK CNC MACHINING & TURNING FACILITY


Thursday, July 18, 2013 at 11:00 AM ET265 Buds Drive, Cowpens, SC 29330Wednesday, July 17, 2013 9:00AM to 4:30PM ET

FEATURING: (2) 2011 & 2008 MAZAK NEXUS 6000 II 4-AXIS CNC HORIZONTAL MACHINING CENTERS, 2010 MAZAK NEXUS 5000 II 4-AXIS CNC HORIZONTAL MACHINING CENTER, (2) 2008 TOYODA FH550R 4-AXIS CNC HORIZONTAL MACHINING CENTERS, 2007 MAZAK NEXUS 510C/50-II VERTICAL MACHINING CENTER, (2) 2008 MAZAK QUICK TURN NEXUS 250-II CNC TURNING CENTER. ALSO: G&L CORDAX CMM + INSPECTION EQUIPMENT & TOOLING; PWB ROYAL TOOL PRESET-TER; ATLAS COPCO AIR COMPRESSORS; OVER 1200 V FLANGE TOOL HOLDERS; PERISHABLE TOOLING; SURFACE GRINDER; BANDSAWS; MILLING MACHINES; ENGINE LATHE; SHOP PRESS; GORBEL CRANE AND JIBS; DUMPING

SCRAP HOPPERS; SHOT BLAST CABINET; TOYOTA 2600 LB ELECTRIC FORKLIFT

IMMACULATE "AS NEW" PRECISION CNC MACHINING FACILITY AS LATE AS 2011

FEATURING: 2011 MAZAK QUICK TURN NEXUS 350MY-II / 2000U CNC LATHE; 2011 MAZAK QUICK TURN NEXUS 250-IIM / 1000U CNC LATHE; 2010 HURCO VMX60SR 5-AXIS CNC VMC; 2010 MARVEL SERIES 8 MARK II VERTICAL SAW; 2010 MITUTOYO CYSTA-PLUS

M7106 CMM; 2011 FORD F350 XLT 4X4 SUPER DUTY, POWER STROKE TRUCK; 10,000LB HYSTER 100 LP FORKLIFT

Sale in conjunction with:


Tuesday, July 23, 2013 at 10:00 AM CT1500 Scottsdale Ct. Suite #100, Elgin, IL 60123Monday, July 22, 2013 9:00AM to 4:00PM CT

[email protected] www.perfectionindustrial.comTel: 866.311.2807

2 LIVE WEBCAST AUCTIONS

All machinery, equipment, merchandise and other items (the "Goods") are sold on an "AS IS/WHERE IS" basis with no warranties or representations whatsoever either expressed or implied. Buyers must register prior to bidding at any auction sale and must be of legal capacity to enter into this agreement. PIS requires a deposit of not less than twenty five percent (25%) of the Buyer’s TOTAL PURCHASE PRICE by the end of sale day - with the balance due by the end of the next business day.


23

farming division


industrial division


Phone: (215) 634-2500 • Email: [email protected]. AUCTIONEERS LICENSE NO. AY-000148-L

Tuesday, July 9th • 9:30 AM

WWW.COMLY.COMVISIT OUR WEBSITE FOR MORE INFO!

Inspection: Friday, July 5th & Monday, July 8th from 9AM to 3PM

By Order of Owner

1340 Ford Road • Bensalem, PA 19020The WegMann COrp.

WebCasT auCTiOn saLe

ONLINE BIDDING PROVIDED BY:

SHEETMETAL MACHINERY & EQUIPMENT

Yale & Caterpillar Forklifts, Scissor Lift Vehicles, Trailers, Plasma Cutters, Shears

Roll Formers, Compressors, Tooling Generator, Office Furniture & Equipment


24

farming division


industrial division

SPECiAL 4Th OF JULY hOLiDAY BiDSPOTTER PRiCE COMPETiTiON

Will work to match all competitive offers on select equipment below!

Please Email or Call Today [email protected]

262-534-4124CNC AUTOMATED TURNiNG CENTERS

2007 TAkAMAZ X-100 CNC LATHEFanuc 21iT CNC Control, NEW EGH High-Speed Overhead Gantry Loader System Output Discharge Conveyor Unit, 8” Chuck, Excellent Condition.

*Full PDF Catalog and Photos on site

CNC MULTi-AXiS TURNiNG CENTERS2000 MORI SEIkI dL-151-MC, 7-AXIS CNC TWIN SPINdLE TWIN TuRRET TuRNING CENTERWith 2 Full C-Axis Live Tool 12 station Turret, 5HP Power Tools and with IEMCA 542 CNC 12FT. Mag. Barfeed Unit Interfaced Installed, Fanuc MSC-501 Control Synchronized Inline Spindles (2) Spindles: 16.5” Swing, View Full Listing Online

CNC TURNiNG CENTERS2000 Haas SL-20 CNC Turning Centerwith CNC M-Code Parts Catcher 8” 3-Jaw Hydraulic Chuck, Quick Tool Setter, 16MB Extended Memory, M-Code Auto Door, Chip Auger, User Definable Macros, This machine is in Like-New Condition with only 853 Cutting Hours.

CNC VERTiCAL TURNiNG & BORiNG MAChiNES2006 Toshiba TuE-15 CNC vertical Turret Lathe with Fanuc Oi-TC CNC ControlHeavy Duty Ram Design,12 Station ATC, Table Diameter 59.1” Swing: 70.9”, Height Under Rail: 59.1”, Part Weight 17,600 lbs. Vertical Travel of Ram 35.4”, 2 Speed Geared Table Speeds: 2-75 Low Range 76-250 Hi Range RPM, Spindle Motor 40HP


CNC VERTiCAL TURNiNG & BORiNG MAChiNES1980 MFG. GRAY RINGMASTER MOdEL RM, 48” TABLE, 54” SWING CNC vERTICAL LATHE50 Hp. 2-Speed Gear Box, 52” Under the Rail, Ram Slide with Design Heavy-Duty Turret Index with Upper & Lower Bearing Design for Rigidity. Allen-Bradley Series 9 CNC Control. RS232 Interface Computer.

GIddINGS & LEWIS dv-15 CNC TWIN SPINdLE vERTICAL LATHEWith Heavy Duty Ram-Slide Turret, 40” Swing 2-24” Chucks, 75 Hp. 2-Speed Gearbox. Features 2nd Spindle with Turret Traverse G/L 8000 Control.

1997 Okuma & Howa Act-35Lwith Fanuc 18T CNC ControlFully Programmable Tail stock with 40” Center Distance and all Options Swing Over Bed 19.69”, Turning Length 40.01” Turning Diameter 13.78”, Hole Thru Spindle 3.62” Spindle Speeds 35 - 3.500 RPM, 12 Station Turret, Spindle Motor 30 HP, Side Discharge Chip Conveyor Includes Standard Tool Holders, Kitagawa 12” 3-Jaw Chuck, Programmable Tail stock

1994 kitamura Mycenter 2 CNC vertical Machining CenterControl: FANUC OM, Travel XYZ: 23 X 16.9 X 18.1 Table Size: 16.1 X 35.4 , Load: 660 LB, Main Moto HP 10, Spindle Speed: 40-8000 RPM, Number of Tools: 20, Spindle Taper: 40 Taper, Nikken 4th Axis Rotary Table, Number of Axes: 4, Equipped with: 3 Pallet Manual Pallet Changer-S/N:10905

CNC hORiZONTAL MAChiNiNG CENTERS 1999 TOYOdA FA-630 CNC HORIZONTAL MACHINING CENTER WITH FANuC 15MB CNC CONTROL Pallet Size (2) 24.8” x 24.8”, X Axis Travel 39.37”, Y Axis Travel 33.26” Z Axis Travel 29.52”, Table Indexing One Degree 360 Positioning Spindle Speeds 50 ~ 14,000 RPM, Main Motor 40 / 30 HP Tool Magazine Capacity 60 ATC, Spindle Taper CAT# 50 Rapid Traverse Rates 1181 IPM, Through Spindle Coolant, Barnes Lift Up Chip Conveyor with Coolant Separator System RPM, Spindle Motor 40HP

1995 NIIGATA SPN-50 CNC HORIZONTAL MACHINING CENTERFanuc 18M CNC Control 2 Pallets Rotary Type APC. Pallet Size 19.7” X 19.7” Travels X Axis 29.5”, Y Axis 29.5”, Z Axis 29.5” B Axis 1 Degree Pallet Index, Rapid Traverse Rate 1575 IPM Spindle Speed 12,000 RPM, Spindle Motor 30 HP. Spindle Cat #50, 128 Automatic Tool Changer

CNC TuRNING CENTERS• 1992 Okuma-Howa 2SP-2L Twin-Spindle Turning Center• 1998 Daewoo Puma 200LC CNC Universal Turning Center

GAP-BEd ENGINE LATHES - uNdER POWER, INSTALLEd• Monarch 24.5” Swing x 262” Centers Engine Lathe *All Options• VDF 20” Swing x 240” Centers Engine Lathe *All Options• 1996 Dainichi DHK-30”-240” *New Sony 3-Axis Digital Readout

1982 LEBLONd MAkINO FNC-106-A30 CNC vERTICAL MACHINING CENTER

(2) HEY #3 FACING & CENTERING MACHINES• HEY NO. 3 27 INCH DOUBLE ENDED FACING AND CENTERING MACHINE • HEY NO. 3 48 INCH DOUBLE ENDED FACING AND CENTERING MACHINE

www.murphymachinery.com

2011 G&L MAG

vTC-1000Loaded With Options and Tooling, Heavy Duty Cutting Construction

CNC Vertical Machining Centers

2009 EMCO MAXTuRN 65-Smy With Sub-Spindle With Full C & Y Axis, Milling Lns

Servo S3 Barfeeder Live Tool Holders, & Options

25

06/11/13 - 07/11/13 Hilco Industrial 877-374-4526 Highway Technologies Private Treaty Sale Multiple Locations

06/24/13 - 07/01/13 Bentley’s Auction 806-376-1121 Scotty’s Machine Shop Machine Shop Items ONLINE only ONLINE

06/26/13 - 07/10/13 Glenn A. Winternitz 773-290-1827 A-Z Machine Products, Inc. Online Only ONLINE

06/28/13 Cincinnati Industrial Auctioneers, Inc. 740-432-7777 Steel Dynamics, LLC. Structural & Plate Fabricating Facility Marietta , OH

06/29/13 Aaron Dowell Auction Co. 855-288-7355 Industrial Equipment Auction Onsite Story City , IA

06/29/13 Belcher McPherson Auction Co. 888-300-6005 Adams Building Contractors Onsite Jackson , MI

06/29/13 Bentley’s Auction 806-376-1121 Melvin Varela Construction Liquidation Auction Pecos , NM

06/29/13 Dann Auctioneers 585-396-1676 Estate Auction Alfred Osborne Shop Equipment and Tools Dundee (Tyrone) , NY

07/08/13 - 07/09/13 Williams & Lipton Company 248-478-2000 Machinery & Equipment Two Day Online Only Public Auction ONLINE

07/09/13 ACS & United Country 512-261-3838 Classic Cabinets Division Onsite & Online West Valley , UT

07/09/13 Comly Auctioneer & Appraisers 215-634-2500 The Wegmann Corp. Sheetmetal Machinery & Equipment Bensalem , PA

07/09/13 Hilpipre Auction Co. 319-235-6007 Finley Excavating Onsite/Online Marion , IA

07/10/13 Aaron Posnik & Co. 413-733-5238 Structural Steel Fabricating Machinery & Equipment Onsite/Online Newington , CT

07/10/13 Cincinnati Industrial Auctioneers 513-241-9701 Hy-Matic Manufacturing Inc. CNC & Automatic Machining Facility Kendalville , IN

07/10/13 Kincaid Auction 800-970-1977 Total Liquidation of Premier Tool & Mold Onsite/Online Largo , FL

07/11/13 Apex Auctions 630-717-3720 Encolsures, Inc., Featuring: Turret Press, Tooling, Milling Online Only Elk Grove Village , IL

07/11/13 Hilco Industrial 877-374-4526 SIAG Aerisyn, LLC - Complete State-of-the-Art Wind Tower Onsite/Online Chattanooga , TN

07/11/13 Infinity Asset Solutions 905-669-8893 Huron Mold & Tool - CNC Tool & Die Facility Onsite/Online Guelph , ON

07/11/13 Rentzels Auction Service Inc. 717-577-1886 Millwrights & Mechanical Services Onsite York , PA

07/13/13 Sierra Auction 602-242-7121 Phoenix Monthly Auction Monthly Auction Phoenix , AZ

07/15/13 - 07/17/13 Hilco Industrial 877-374-4526 Specialty Coating & Laminating - Late-Model Slitting Online Only South Hadley , MA

07/16/13 Hilco Industrial 877-374-4526 Kaydon Corporation Onsite/Online Sumter , SC

07/16/13 Moecker Auctions 800-840-2437 BlueChip Power & Advanced Solar Photonics Onsite/Online Lake Mary , FL

07/16/13 Perfection Industrial Sales 847-427-0747 Former Assets of Core Systems LLC Onsite/Online Mount Gilead , OH

07/18/13 Perfection Industrial Sales 866-311-2807 Patriot CNC - VERY Late Model Mazak CNC Machining & Turning Onsite/Online Cowpens , SC

07/23/13 - 07/24/13 Infinity Asset Solutions 905-669-8893 ACAN Windows & Doors Manufacturer Online Only Paradise , NL

07/23/13 Perfection Industrial Sales 866-311-2807 EZ Precision Machining Inc Onsite/Online Elgin , IL

07/27/13 DeMott Auction Co. 800-985-5699 Tractors, Construction, Vehicles & Trailers Onsite/Online Bay City , TX

07/30/13 Martin & Martin Auctioneers 864-947-7888 Owsley & Sons/D&O Equipment Onsite/Online Fort Mill , SC

07/31/13 Asset Sales Inc. 888-800-4442 Even Temp, Inc. Late Model Fabrication Facility Waco , NE

07/31/13 Myron Bowling Auctioneers 513-738-3311 General Electric Onsite/Online Salisbury & Mebane , NC

08/01/13 Myron Bowling Auctioneers 513-738-3311 General Electric Onsite/Online Houston , TX

08/06/13 Asset Sales 888-800-4442 Paramount Tool & Engineering Onsite/Online Copiague (Long Island) , NY

08/14/13 Thomas Industries 203-458-0709 Beacon Industries Onsite/Online Newington , CT

09/26/13 Corporate Assets 416-962-9600 Art Recherches et Technologies Avancees Onsite/Online Bowmanville , ON

Upcoming Auctions

auctIOnS

bankruptcy sale kbk mechanical - … mea_06272013.pdfbankruptcy sale roto-die bender brake,...

Documents