7/29/2019 Click Here for Full Paper355paper

1/2

INTROUCTION

Over the past 15 years, optical current sensors have received significant attention by a number or

search groups around the world as next generation high voltage measurement devises, with a view

to replacing iron-core current transformers in the electric power industry. Optical current sensorsbring the significant advantages that they are non-conductive and lightweight, which can allow for

much simpler insulation and mounting the designs. In addition, optical sensors do not exhibit

hysteresis and provide a much larger dynamic range and frequency response than iron-core CT's.

A common theme of many of the optical current sensors is that they work on the principle of the

Faraday effect. Current measurement plays an important role in protection and control of electric

power systems. With the development of the conventional CT, the accuracy of the CT is up to 0.2%

in the steady state power system. However many disadvantages of the conventional CT appear with

the short circuit capacities of electric power systems getting larger and the voltage levels going

higher for example, saturation under fault current conditions, ferroresonance effects, potential for

catastrophic failure etc. Today there is number of interest in using optical current transformer

(OCT) to measure the electric current by means of Faraday effect.

The benefits of an OCT are the inverse of the conventional CT's problems. That is, no saturation

under fault current conditions, with out iron core and there fore no ferroresonance effects, with

out oil and there fore cannot explode, light weight, small size, etc.

A common theme of many of the optical current sensors is that they work on the principle of the

Faraday effect. Current flowing in a conductor induces a magnetic field, which, through the

Faraday effect, rotates the plane of polarization of the light traveling in a sensing path encircling

the conductor. Ampere's law guarantees that if the light is uniformly sensitive to magnetic field all

along the sensing path, and the sensing path defines a closed loop, then the accumulated rotation

of the plane of polarization of the light is directly proportional to the current flowing in the

enclosed wire.

The sensor is insensitive to all externally generated magnetic fields such as those created by

currents flowing in near by wires. A measurement of the polarization state rotation thus yields a

measurement of the desired current. The technology originated 8 years ago to measure currents in

Series Capacitor installations. Since then, it has been introduced not only to Series Capacitor and

Thyristor Controlled Series Capacitor installations (FACTS), but also into High Voltage Direct

Current Systems (HVDC).

These FACTS & HVDC systems gain their very high availability and reliability using the optically

powered CT technology. Further integration of the optically powered technology has led to an

economical and solid metering and protection current transformer without any of the knownenvironmental problems associated with the oil or SF6-gas filled technology.

7/29/2019 Click Here for Full Paper355paper

2/2

Researchers have perfected the OPCT to measure currents and transmit the data from high voltage

system to ground potential using state of the art Laser technology. The fundamental of this

technology includes the idea of using fiber optic cables to isolate the current transformers from

ground potentials. The advantages of the optically powered scheme compared to the conventional,

high voltage, free standing magnetic CT include an environmentally friendly, light weight, non

seismic critical composite signal column together with proven, conventional, low voltage rated 'dry

type' CT technology.