Low Cost Equipment Monitoring

• For use with remotely located field compressors, power generators, artificial lift systems, and other equipment types.

• A low cost monitoring solution will allow the owner of these types of equipment to gather the operating conditions from a central location.

• The result is a more efficient use of equipment.

• Accurate measurement

Device Description

• Remote monitoring device using AFTI Sentry end-to-end architecture.

• Unlimited web access from any location.

• Globalstar Satellite Network

• 6 process inputs per location– 3 pressure e.g. Engine oil pressure (callout), suction and discharge

– 3 temperature e.g. Engine jacket water temp, + 2 process temps

CP-Net: Data From Any Location

Real-time Data = Increased Run Time

Alarming on Shutdown

Permits Proactive Response

Event Sequence

• Equipment data is gathered at one minute intervals and compressed into hourly averages.

• These readings are transmitted automatically every four hours through the Globalstar Satellite Network.

• The information is received at the AFTI Sentry website where the data is translated and formatted.

• Equipment owners can log on from any computer that has internet capabilities (including handhelds) and view the data.

Callouts

• Callouts are generated by a device alarm built into the hardware at each location.

• Typically this is connected to the engine oil pressure with a set point that indicates the engine status.

• When the engine stops running, the CP-Net sends an instantaneous message.

• The message is distributed to the equipment operator.

Value

• Fewer site visits increases operator efficiency and reduces environmental impact.

• Callout system reduces costly downtime.

• Receive accurate vital equipment data

• Frequent updates on running conditions will result in improved equipment function and optimization (historical data).

• Equipment uptime tracking

• Remote monitoring will provide info when attempting to solve problems with equipment function (increased uptime).