digital logic design
DESCRIPTION
Digital Logic Design. CHAPTER 1 BINARY SYSTEMS. Digital Computers & Digital Systems. the most striking property of a digital computer is its generality. It can follow a sequence of instructions, called a program, that operates on given data. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/1.jpg)
Digital Logic DesignCHAPTER 1
BINARY SYSTEMS
![Page 2: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/2.jpg)
2
Digital Computers & Digital Systems
• the most striking property of a digital computer is its generality.– It can follow a sequence of instructions, called a
program, that operates on given data.– The user can specify and change programs and/or
data according to the specify need.• general-purpose digital computers can perform
a wide variety of information-processing tasks.– The general purpose digital computer is the best
known example of a digital system.
![Page 3: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/3.jpg)
3
Digital Computers & Digital Systems
• Early digital computers were used mostly for numerical computations.– In this case the discrete elements used are the
digits. From this application, the term digital computer has emerged
– A more appropriate name for a digital computer would be a “discrete information processing system”.
![Page 4: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/4.jpg)
4
Digital Computer
Figure 1-1 BLOCK DIAGRAM OF A DIGITAL COMPUTER
Control unitProcessor or
arithmetic unit
Storage or memory unit
Output devices and control
Input devices and control
![Page 5: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/5.jpg)
5
Digital vs. Analog
• An analog system has continuous range of values– A mercury thermometer– Human eye
• A digital system has a set of discrete values– Digital Thermometer– Digital camera
![Page 6: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/6.jpg)
6
Digital vs. Analog
– Cheap electronic circuits– Easier to calibrate and adjust– Resistance to noise: Clearer picture and sound
Analog signal Digital signal
![Page 7: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/7.jpg)
7
Binary System
• The binary numbers system have two possible values:0 and 1
• Discrete elements of information are represented with bits called binary codes.– Example:
(09)10 = (1001)2
(15)10 = (1111)2
![Page 8: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/8.jpg)
8
Decimal Number
• Review the decimal number system– Base (Radix) is 10 - symbols (0,1, . . 9) Digits– Each position carries a weight:
– If we were to write 1936.25 using a power series expansion and base 10 arithmetic:
Weights:310 310210 110 010 110 210
MSDLSD
210123 105102106103109101
![Page 9: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/9.jpg)
9
Binary number system
• The binary number system– Base is 2 - symbols (0,1) - Binary Digits (Bits)– Each position carries a weight:
– If we write 10111.01 using a decimal power series we convert from binary to decimal:
2101234 21202121212021
32 32Weights: 22 12 02 12 22MSD
LSD
25.2325.015.0011214180161
![Page 10: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/10.jpg)
10
Octal/Hex number systems
• The octal number system:– Its base is 8 eight digits 0, 1, 2, 3, 4, 5, 6, 7– For example: (236.4)8 = (158.5)10
• The hexadecimal number system.– Its base is 16 first 10 digits are borrowed from the decimal system
and the letters A, B, C, D, E, F are used for the digits 10, 11, 12, 13, 14, 15
– E.g. (D63FA)16 = (877562)10
877562161016151631661613 01234
5.15884868382 1012
![Page 11: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/11.jpg)
11
Conversion from Decimal to Binary
• It is necessary to separate the number into an integer part and a fraction: – Repeatedly divide the decimal number by 2– e.g. Find the binary equivalent of 37.
372
18292
422212
210 10010137
= 18 + 0.5
= 9 + 0
= 4 + 0.5
= 2 + 0
= 1 + 0
= 0 + 0.5
1
0
1
0
0
1
![Page 12: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/12.jpg)
12
Conversion from Decimal to Binary
• Conversion from decimal fraction to binary:– Same method used for integers except
multiplication is used instead of division.– e.g. convert (0.8542)10 to binary (6 digits):
0.8542 x 2 = 1 + 0.7084 a-1 = 1
0.7084 x 2 = 1 + 0.4168 a-2 = 1
0.4168 x 2 = 0 + 0.8336 a-3 = 0
0.8336 x 2 = 1 + 0.6672 a-4 = 1
0.6675 x 2 = 1 + 0.3344 a-5 = 1
0.3344 x 2 = 0 + 0.6688 a-6 = 0
(0.8542)10 = (0.110110)2
![Page 13: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/13.jpg)
13
Conversion from Decimal to Octal
• The conversion from decimal integers to any base –r system:– Similar to the binary, except that division is done by r
instead of 2– Convert decimal 153 to octal:
1538
198
28810 231153
= 19 + 125
= 2 + 375
= 0 + 25
1
3
2
![Page 14: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/14.jpg)
14
Conversion from Decimal to Octal
• Conversion from decimal fraction to octal:– Same method used for integers except multiplication
is used instead of division.– e.g. convert (0.3152)10 to octal (4 digits):
0.3152 x 8 = 2 + 0.5216 a-1 = 20.5216 x 8 = 4 + 0.1728 a-2 = 40.1728 x 8 = 1 + 0.3824 a-3 = 10.3824 x 8 = 3 + 0.0592 a-4 = 3
(0.3152)10 = (0.2413)8
• The conversion of decimal numbers with both integer and fraction parts is done separately and then combing the two answers together .
![Page 15: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/15.jpg)
15
Numbers with different bases
00010203040506
071011121314151617
Decimal Hex Binary0 0 00001 1 00012 2 00103 3 00114 4 01005 5 01016 6 01107 7 01118 8 10009 9 100110 A 101011 B 101112 C 110013 D 110114 E 111015 F 1111
Octal
![Page 16: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/16.jpg)
16
Conversion using Table
• Conversion from and to binary, octal, and hexadecimal plays and important part in digital computers.– Since 23 = 8 and 24 = 16– Each octal digit corresponds to 3 binary digits• (010 111 100 . 001 011 000)2 = (274.130)8
– Each hexa digit corresponds to 4 binary digits • (0110 1111 1101 . 0001 0011 0100)2 = (6FD.134)16
![Page 17: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/17.jpg)
17
Complements
• Used in digital computers for subtraction operation and for logic manipulation.
• There are two types of complements for each base-r system: – The r’s complement & (r-1)’s complement• 2’s and 1’s complement for binary numbers• 10’s and 9’s complement for decimal numbers
![Page 18: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/18.jpg)
18
The r’s Complement
– The r’s complement of N=rn – N (N is a decimal #).
• The 10’s complement of (52520)10 is• 105 - 52520=47480• The 10’s complement of (0.3267)10 is• 1- 0.3267=0.6733• No integer part , so 10n=100=1• The 10’s complement of (25.639)10 is• 102 - 25.639=74.361.• The 2’s complement of (101100)2 is
• (26)10 – (101100)2=(1000000 - 101100)2=010100.
• The 2’s complement of (0.0110)2 is
• (1 – 0.0110)2 =0.1010
![Page 19: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/19.jpg)
19
The r’s Complement
– The 10’s complement of a decimal number can be formed by leaving all least significant zeros unchanged, subtracting the first nonzero least significant digits from 10, and then subtracting all other higher significant digits from 9.
– The 2’s complement can be formed by leaving all least significant zeros and the first nonzero digit unchanged, and then replacing 1’s by 0’s and 0’s by 1’s in all other higher significant digits.
![Page 20: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/20.jpg)
20
The (r - 1)’s complement
– The (r-1)’s complement of N= rn - r-m- N .• The 9’s complement of (52520)10 is
(105 -1- 52520)= 99999 – 52520 = 47479No fraction part , so 10-m=100=1
• The 9’s complement of (0.3267)10 is
(1- 10-4 - 0.3267)= 0.9999 – 0.3267 = 0.6732No integer part , so 10n=100=1
• The 9’s complement of (25.639)10 is
(102 – 10-3 - 25.639)= 99.999 – 25.639 = 74.360• The 1’s complement of (101100)2 is
(26 -1) – (101100)2=(111111 - 101100)2=010011
• The 1’s complement of (0.0110)2 is
(1 – 2-4) - (0.0110)2 = (0.1111 – 0.0110) = 0.1001
![Page 21: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/21.jpg)
21
The (r - 1)’s complement
– The 9’s complement of a decimal number is formed simply by subtracting every digit from 9.
– The 1’s complement of a binary number is even simpler to form : the 1’s are changed to 0’s and the 0,s to 1’s.
– The r’s complement can be obtained from the (r-1)’s complement after the addition 1 to the least significant digit.
![Page 22: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/22.jpg)
22
Subtraction with r’s Complements
• The subtraction of two positive numbers (M-N)r, may be done as follows:– Add the minuend M to the r’s complement of the
subtrahend N.– Inspect the result obtained for an end carry:• If an end carry occurs, discard it.• If an end carry does not occur, take the r’s complement
of the number obtained in step 1 and place a negative sign in front.
![Page 23: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/23.jpg)
23
Decimal Subtraction
– Subtract 7188 – 3049 using 10’s complement:M = 7188
10’s complement of N = + 6951 Sum = 14139
Discard end carryAnswer = 4139
– Subtract 150 – 2100 using 10’s complement:M = 0150
10’s complement of N = + 7900 Sum = 8050
There’s no end carry negative Answer = (10’s complement of 8050) = – 1950
![Page 24: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/24.jpg)
24
Binary Subtraction
– Subtract 1010100 – 1000100 using 2’s comp.:M = 1010100
2’s complement of N = + 0111100 Sum = 10010000
Discard end carryAnswer = 10000
– Subtract 1000100 – 1010100 using 2’s comp.:M = 1000100
2’s complement of N = + 0101100 Sum = 1110000
There’s no end carry negative Answer = (2’s complement of 1110000) = – 10000
![Page 25: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/25.jpg)
25
Subtraction with (r-1)’s Complement
• The subtraction with the (r-1)’s compl. is exactly the same as the one used with the r’s complement.– Add the minuend M to the (r-1)’s complement of the
subtrahend N.– Inspect the result obtained for an end carry.
• If an end carry occurs, add 1 to the least significant digit (end-around carry).
• If an end carry does not occur, take the (r-1)’s complement of the number obtained in step 1 and place a negative sign in front
![Page 26: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/26.jpg)
26
Decimal Subtraction
– Subtract 72532 – 03250 using 9’s compl.:M = 72532
9’s complement of N = + 96749 Sum = 169281
end-around carry + 1 Answer = 69282
– Subtract 03250 – 72532 using 9’s compl.:M = 03250
9’s complement of N = + 27467 Sum = 130717
There’s no end carry negative Answer = - (9’s complement of 30717)= - 69282
![Page 27: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/27.jpg)
27
Binary Subtraction
– Subtract 1010100 – 1000100 using 1’s compl.:M = 1010100
1’s complement of N = + 0111011 Sum = 10001111
end-around carry + 1 Answer = 0010000
– Subtract 1000100 – 1010100 using 1’s compl.:M = 1000100
1’s complement of N = + 0101011 Sum = 11101111
There’s no end carry negative Answer = - (1’s complement of 1101111)= - 10000
![Page 28: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/28.jpg)
28
Signed binary numbers
– To represent a negative binary number, the convention is to make the sign bit 1. [sign bit 0 is for positive]
010019 (unsigned binary)
+9 (signed binary)
1100125 (unsigned binary)
– 9 (signed binary)
![Page 29: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/29.jpg)
29
Binary Codes
• Digital systems represent and manipulate not only binary numbers, but also many other discrete elements of information.– Any discrete element of information distinct among a
group of quantities can be represented by a binary code.• Red is one distinct color of the spectrum.• The latter A is one distinct latter of the alphabet.
– To represent a group of 2n distinct elements in a binary code requires a minimum of n bits. This is because it is possible to arrange n bit in 2n distinct way.
![Page 30: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/30.jpg)
30
Binary Codes
– For example:• A group of four distinct quantities can be represented by a
two-bit code, with each quantity assigned one of the following bit combinations: 00, 01, 10, 11.
• A group of eight elements requires a three-bit code, with each element assigned to one of the following bit combinations: 000, 001, 010, 011, 100, 101, 110,111.
– The examples show that the distinct bit combinations of an n-bit code can be found by counting in binary from 0 to (2n-1).
– Some bit combinations are unassigned when the number of elements is not a multiple of the power of 2. e.g. the ten decimal digits 0,1,2,…..,9
![Page 31: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/31.jpg)
31
Binary Codes
– A binary code that distinguishes among ten elements must contain at least four bits:• Three bits can distinguish a maximum of eight elements.• four bits can form 16 distinct combinations, but since
only ten digits are coded , the remaining six combinations are unassigned and not used
![Page 32: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/32.jpg)
32
Decimal Codes
• Decimal numbers are represented in a digital system using a string of bits.– This can be done in various ways.
• A set of n-bit strings where different strings represent different numbers or other things is called a code.
• A particular combination of n-bit values is called a code word.
• A common and convenient code for decimal numbers is Binary-coded decimal (BCD).
![Page 33: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/33.jpg)
33
Decimal Codes
• BCD is a binary representation of decimal numbers in a form that can easily be interpreted by a person.
• The weights in the BCD code are 8, 4, 2, 1.– The bit assignment 0110, for example, can be
interpreted by the weights to represent the decimal digit 6 because 0x8+1x4+1x2+0x1=6
• A decimal code that has been used in some old computers is the excess-3 code.– Its code assignment is obtained from the
corresponding value of BCD after the addition 3
![Page 34: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/34.jpg)
34
Decimal Codes
• Numbers are represented in digital computers either in binary or in decimal through a binary code.– When specifying data, the user likes to give data in
decimal form.– The input decimal numbers are stored internally in the
computer by means of a decimal code. – Each decimal digit requires at least four binary storage
elements.– The decimal numbers are converted to binary when
arithmetic operations are done internally with numbers represented in binary.
![Page 35: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/35.jpg)
35
Decimal Codes
• It is also possible to perform the arithmetic operations directly in decimal codes.– The decimal number 395, when converted to binary,
is equal to 110001011 and consists of nine binary digits.
– The same number, when represented internally in the BCD code, occupies four bits for each decimal digit, for a total of 12 bits: 001110010101.
![Page 36: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/36.jpg)
36
Decimal Codes
• It is very important to understand the difference between conversion of a decimal number to binary and the binary coding of a decimal number.– The bits obtained from conversion are binary digits.– Bits obtained from coding are combinations of 1’s
and 0’s arranged according to the rules of of the code used.• The binary conversion of decimal 13 is 1101 ;• The coding of decimal 13 with BCD is 00010011.
![Page 37: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/37.jpg)
37
Decimal Codes
• The exess-3, the 2, 4, 2, 1 and the 8, 4, -2, -1 are self complementary codes.– That is, the 9’s complement of the of the decimal
number is obtained by changing 1’s to 0’s and 0’s to 1’s.• For example, 395 is represented in 2, 4, 2, 1 code by
001111111011. its 9’s complement 604 is represented by 110000000100.
![Page 38: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/38.jpg)
38
The Reflected Code
• Used to represent the digital data converted from the analog data.
• The advantage of the reflected code over pure binary numbers is that a number in the reflected code changes by only one bit as it proceeds from one number to the next.
• The reflected code is also known as the Gray Code.
![Page 39: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/39.jpg)
39
Alphanumeric Codes
• Many application of digital computers require the handling of data that consist not only of numbers, but also of letters.– That is, it is necessary to have a binary code for the
alphabet.• an alphanumeric code is a binary code of a
group of elements consisting of the ten decimal digits, the 26 letters of the alphabet, and a certain number of special symbols such as $.
![Page 40: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/40.jpg)
40
Alphanumeric Codes
• The total number of the elements in an alphanumeric group is greater than 36.– It must be coded with a minimum of six bits.• 26 = 64, but 25 = 32 is insufficient.• The internal code is a six-bit Alphanumeric Codes.
• ASCII most common code for representing alphanumeric characters.– 7-bit code. Typically stored in a byte 8 bit can be
used for parity.
![Page 41: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/41.jpg)
41
Error-Detecting Code
• An Error-Detecting Code can be used to detect errors during transmission.
• Parity bit: an extra bit included with a message to make the total number of 1’s either even or odd.– For example,
with even parity with odd parityASCII A = 1000001 01000001 11000001ASCII T = 1010100 11010100 01010100
![Page 42: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/42.jpg)
42
Binary Storage and Registers
• A binary cell is a device that possesses two stable states and is capable of storing one bit of information.
• A register is a group of binary cells. – Since a cell stores one bit of information, it follows
that a register with n cells can store any discrete quantity of information that contains n bits.
• Register Transfer– A transfer of the information stored in one register
to another.
![Page 43: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/43.jpg)
43
Register Transfer
![Page 44: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/44.jpg)
44
Register Transfer
![Page 45: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/45.jpg)
45
Binary Logic
• Boolean algebra• Consists of binary variables and logical
operations• Binary variables– The variable are designated by letters of the
alphabet such as A,B,C,x,y,z, etc.– Two discrete values (true/false; yes/no; 1/0)
• Logical operations– Three basic operations: AND, OR, NOT
![Page 46: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/46.jpg)
46
Definition of Binary Logic
• AND: this operation is represented by a dot or by the absence of an operator.– x . y =z or xy=z is read “x and y is equal to z.”– The logical operation AND is interpreted to mean
that z=1 if and only if x=1 and y=1; otherwise z=0.• OR: this operation is represented by a plus sign. – x+y=z is read “x OR y is equal to z” – Meaning that z=1 if x=1 or if y=1 0r if both x=1 and
y=1 . If both x=0 and y=0, then z=0
![Page 47: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/47.jpg)
47
Definition of Binary Logic
• NOT: this operation is represented by a prime (sometimes by a bar). – For example, x’=z (or x=z) is read “x not is equal to
z,” – Meaning that z is what x is not . In other words, if
x=1, then z=0; but if x=0, then z=1• A truth table is a table of all possible
combinations of the variables showing the relation between the values that the variables may take and the result of the operation
![Page 48: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/48.jpg)
48
Truth tables of logical operations
![Page 49: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/49.jpg)
49
Logic Gates
• Logic circuits that perform the logical operations of AND, OR , and NOT
Gates with multiple inputs
Symbols for digital logic circuits
![Page 50: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/50.jpg)
50
Integrated Circuits
• An integrated circuit (IC) is a small silicon semiconductor crystal, called a chip.– It is contain an electrical components such as
transistor, diodes, resistors, and capacitors.– The various components are interconnected inside
the chip to form an electronic circuit.– The chip is mounted on a metal or plastic package,
and connections are welded to external pins to form the IC.
![Page 51: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/51.jpg)
51
Integrated Circuits
• integrated circuits come in two types of packages, the flat package and the dual-in-line (DIP) package.– The dual-in-line package is the most widely used
type because of the low price and easy installation on circuit boards.
• Most packages have standard sizes, and the number of pins ranges from 8 to 64.
• Each IC has a numeric designation printed on the surface of the package for identification.
![Page 52: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/52.jpg)
52
Integrated Circuits
• The advantages of constructing digital systems with IC’s.– Size of IC packages is very small– The cost of IC’s is very low.– Their reduced power consumption.– Suitable for high speed operations.– The use of IC’s reduces the number of external wiring
connections because many of the connections are internal to the package.
• IC’s are classified in two general categories, linear and digital
![Page 53: Digital Logic Design](https://reader034.vdocument.in/reader034/viewer/2022051402/56815ab0550346895dc858f5/html5/thumbnails/53.jpg)
53
Integrated Circuits
– Several logic gates in a single package make it a small –scale integration (SSI) device.
– To qualify as a medium-scale integration (MSI) device, the IC must perform a complete logic function and have a complexity of 10 to 100 gates.
– A large-scale integration (LSI) device performs a logic function with more than 100 gates.
– There are also very-large-scale integration (VLSI) devices that contain thousands of gates in a single chip