Dissolution Media PreparatorŸ Enables filtration, pre-heating, deaeration,

and precise dosing of media in the vessel within the dissolution bath

Ÿ 21 ltr media tank capacity allows filling of dissolution vessels for up to 3 dissolution tests (n = 6)

Ÿ Batch degassing ensures inter-vessel degassing consistency

Ÿ Volumetric dispensing with an accuracy better than + 1% as per USP, FDA and Ph. Eur. requirements

Ÿ Special nozzle design allows the handling of surfactant and frothing media like Sodium Lauryl Sulphate (SLS)

Ÿ Programmable deaeration time, temperature and vacuum for effective deaeration of different media

Ÿ Maintains media under vacuum at desired temperature while in idle condition

Ÿ Virtually zero dead volume minimizes wastage of media

Ÿ Programmable dispensing volumes from 200 ml to 4 ltrs

Ÿ Fast filling of dissolution vessels at a dispensing rate of 900 ml/min

Ÿ Programmable rinse and cleaning cycle allows the instrument to run through a prevalidated self cleaning procedure

Ÿ On-board memory stores 10 batch information of degassed media

QbDQuality by Design

Ÿ Unparalleled versatility due to 1 ml volume change increments

oŸ 360 turning radius allows it to be

maneuvered in tight placesŸ Multifunction single hose for dispensing,

aspirating, cleaning, rinsing, and draining ensures no lifting of heavy media tanks

Versatility

Ÿ Ergonomically designed nozzle with embedded dispense switch for ease of operation

Ÿ User friendly validation and calibration of media volumes

User friendly

Ÿ Print out of validation, calibration, dispensed volume and temperature reports

Reports

360 turningradius°

CIPClean-In-Place No lifting of

media tankVolume change

increment

1ml

Media volume

21 Ltr.

Frothy mediahandled

Dead volume

0Virtually

Programmablevacuum

EMP-21

The information contained in this document is believed to be correct, But E LECTROLAB accepts no liability for any errors and reserves the right to alter specifications without notice

• Complete range of Dissolution Testers • Disintegration Testers • Friability Testers• Tablet Hardness Testers • Tap Density Testers • Electromagnetic Sieve Shaker • Powder Flow Tester

Specifications

Our Products

Certified ISO 9001 : 2008

< 6 ppm is recommended dissolved oxygen level for USP Prednisone Tablets RS (Ref : USP Dissolution Toolkit version 2.0)

USP 35 states “Dissolved gases can cause bubbles to form, which may change the results of the test.”

Importance of Degassing

2 to 21 litres

± 1%

900 ml/min

0.2 to 4 litres

± 1%

900 ml/min

o o 20 C to 50 Co0.5 C

Accuracy

Aspiration :

Media volume

Flow rate (during run cycle)

Dispense :

Dispense volume

Temperature :

Temperature range

Accuracy

Flow rate (during run cycle)

Temperature accuracy

100 kg

Stainless Steel

100 to 500 mm/Hg

High performance piston pump

230 VAC/50 Hz 10%110 VAC/50 Hz ± 10%

±

55 x 92 cm cm

± 1%Piston pump accuracy

Degassing level (measured by DO meter)2

Media tank

Vacuum

Piston pump

Electrical power

Dimensions (Ø x H)

Weight

Model EMP-21

Other specifications :

Inter & Intra Laboratory

VariabilityReliability

Ÿ 52.3% of mean percent dissolved Ÿ 11.8% of standard deviation

Effective deaeration reduces variability in results by:

Ref : Eaton J et al. Perturbation Study of Dissolution Apparatus Variables -A Design of Experiment Approach. Dissolution Technologies;14(2):20-26.

* Dependent on media type and conditions

CE

Optional Accessory : Optical DO meter2

< 5 ppm of *DO2

ELECTROLAB

&Service

Worldwide

SalesHead Office:

401, Tirupati Udyog, I. B. Patel road, Off. Western Express Highway, Goregaon (East), Mumbai- 400063, India.

Tel: +91-22-40413131 Fax: +91-22-40413199, Website : www.electrolabindia.com, Email : sales@electrolabindia.com