Download - Pp Kee Guard Web
Kee® Guard
2
Freestanding, non-penetrative, collective roof edge protection system
Complies with EN ISO 13374 Class A
Kee® Guard
3
Features
Independently tested, exceeds all European Safety requirements
Provides Collective Protection for roofs of up to 10º pitch
Versatile modular construction
Three types of upright available
Standard Fittings and Tubes galvanised to BS EN ISO 1461
Recycled PVC counterweights
Available colour coated
Kee® Guard
4
Benefits
Quick and easy to install
No penetration of Roof Membrane
No welding, bending or threading on site
Low installation time and cost
Sections can be added to and changed on site
No special tools required
Recycled PVC weights are easy to handle and position, reducing installation time
Kee® Guard
5
Placement
Suitable for flat roofs of up to 10º pitch
Concrete
PVC single ply membrane roofs
Mineral felt
Asphalt
Kee® Guard
6
Components
KGU35 vertical postKGU35 vertical postKGU35 vertical postKGU35 vertical post
1100mm high
Locator for the counter weights
Supplied as assembly
Fitted standard with 2 off 135-8
Kee Klamp saddle fittings
Kee® Guard
8
Components
CounterweightsCounterweightsCounterweightsCounterweights
13.5 kg to 16.5 kg
460 x 500 x 85 mm
Carrying handles moulded into the design
Available in black as standard
Orange available where required to highlight a trip hazard.
Other colours available by request at extra cost
Environmentally friendly, made from 100% recycled material in the EU
Kee® Guard
9
Components
CB1P CounterCB1P CounterCB1P CounterCB1P Counter----weights assemblyweights assemblyweights assemblyweights assembly
Used with each
intermediate upright
Tube 1075mm long
2.2m or 2m centres
Kee® Guard
10
Components
CB2P, CB3P, CB4P, CB7PCB2P, CB3P, CB4P, CB7PCB2P, CB3P, CB4P, CB7PCB2P, CB3P, CB4P, CB7P
Free end Counter-weight assemblies
Tube 1575mm long
Use dependent on edge distance, parapet up-
stand & length of run
Kee® Guard
11
Free end detail options
Roofs up to 10º pitch
1.1.1.1. RestrainedRestrainedRestrainedRestrained
Upright butted up against roof up- stand (min. 150mm) Use CB2P End Assembly
2.2.2.2. UnrestrainedUnrestrainedUnrestrainedUnrestrained
Where roof up-stand is less than 150mm Use CB7P End Assembly
Max bay size 2m
Max bay size 2m
Min
300mm
Kee® Guard
12
Free end detail options
Roofs up to 3º pitch
1.1.1.1. RestrainedRestrainedRestrainedRestrained
Upright butted up against roof up-stand (min. 150mm)
End bays 1.5 m. Use CB1P End Assembly
Max bay size 2.2m
CB1P
Kee® Guard
14
Components
Top and midTop and midTop and midTop and mid----rails rails rails rails
48.3 mm diameter (size 8), Galvanised tube
Weight = 3.5-4.5 kg/m
Kee® Guard
15
Joints and corners
14-8 Joint for top & mid rails
15-8 90º Elbow
19-8 Adjustable Elbow, angles between 90-180º
55-8 Obtuse Angle Elbow, 125-178º angle
BC53-88 Swivel Elbow, adjustable inline
connection through 202º
14-8 15-8 19-8 55-8 BC53-88
Kee® Guard
16
Termination options
Free EndsFree EndsFree EndsFree Ends
‘D’ Return
Cut ends, finished with 77
plastic plug
Kee® Guard
17
Installation
Tools requiredTools requiredTools requiredTools required
Hex key socket screw size 5/16" AF
Torque wrench (10- 60 Nm approx).
Tape measure
50 mm tube cutter
Drill with suitable drill bit (for wall connection)
KeeGuard® Lite
19
Complies With EN 14122
Part 3
Lightweight Aluminium
construction
Non-penetrative
Reduces roof loadings
High corrosion resistance
KeeGuard® Lite
20
Suitable for flat roofs of up to
3º pitch
Concrete
PVC single ply membrane
roofs
Mineral felt
Asphalt
KeeGuard® Lite
21
Freestanding
KGU45 vertical post KGU45 vertical post KGU45 vertical post KGU45 vertical post
48.3 mm dia. (size 8) tube
1100 mm high
5.4 kg
Uses 45-87 fittings
KeeGuard® Lite
23
Components
L14-8 Straight coupling
L15-8 90º Elbow
L19-8 Adjustable Side Outlet Tee
Angles between 60-200º
LB54-88 Adjustable Elbow
Adjustable between 45-200º
61-8 Wall fixings
C58-8 Wall fixings
L14L14L14L14----8888
L15L15L15L15----8888
L19L19L19L19----8888
LB54LB54LB54LB54----88888888
61616161----8888
C58C58C58C58----8888
KeeGuard® Lite
24
Kee Guard Lite Fully Restrained Kee Guard Lite Fully Restrained Kee Guard Lite Fully Restrained Kee Guard Lite Fully Restrained system layouts
4.5m plus continuous run
KeeGuard® Lite Standing
Seam
26
Special fixing clamp suits most
available standing seam systems
Modular system supplied in
prefabricated kit form
Uses a non penetrative clamp
Complies with BS EN ISO 14122
Part 3
Optional colour coating in all RAL
colours available
KeeGuard® Lite Standing
Seam
27
Components
Seam Clamp ( KLSSB0030 )Seam Clamp ( KLSSB0030 )Seam Clamp ( KLSSB0030 )Seam Clamp ( KLSSB0030 )
316 stainless steel
Two part clamp
Non-penetrative
Tightened to 20Nm
KeeGuard® Lite Standing
Seam
28
Components
L14-8 Straight coupling
L15-8 90º Elbow
L19-8 Adjustable Side Outlet Tee
Angles between 60-200º
LB54-88 Adjustable Elbow
Adjustable between 45-200º
61-8 Wall fixings
C58-8 Wall fixings
L14L14L14L14----8888
L15L15L15L15----8888
L19L19L19L19----8888
LB54LB54LB54LB54----88888888
61616161----8888
C58C58C58C58----8888
Topsheild
30
Top fix guardrail system
For metal profile roofs
Up to 10º pitch
Sealing strip ensures integrity of the roof
Galvanised to ISO 1461
Topsheild
31
For metal profile roofs minimum
thickness 0.7mm
Fixed using Tek screws
To suit crown centres of:
250mm, 310mm, 333mm,
400mm, 500mm
Topsheild
32
BASE ASSEMBLIES MUST BE SPACED AT 2M CENTRES.
THE GAP BELOW THE BOTTOM RAIL SHOULD NOT EXCEED 470MM, MEASURED FROM ANY RAISED ROOF EDGE OR
PARAPET. IF THERE IS NO PARAPET, RAISED EDGE, ETC.., TOE BOARDS OF NOT LESS THAN 150MM HIGH MUST BE FITTED.
WHERE THE SYSTEM IS UNDER 6M OVERALL THE BAY END MUST NOT PROTRUDE MORE THAN 50MM FROM THE
LAST LEG. FOR ALL SYSTEMS 6M OR OVER, THE BAY END MAY PROTRUDE UP TO A MAXIMUM OF 500MM.
DIMENSIONS 'A' + 'B' MUST NOT TOTAL MORE THAN 2.5M.
2M MAX.SEE NOTE 3 'A'2M MAX.
BAY JOINING
CONNECTORS
SE
E
NO
TE
2
470
MM
MA
X.
'B'
SE
E N
OT
E 3
0.9
1M
- 1
.1M
MA
X.
1.
2.
3.
4.
'D' RETURN
33
Maintenance
The KeeGuard® systems are virtually maintenance-free.
Replace any damaged parts or grub screws with original spare parts.
Use clean water for cleaning. Use of hose or high-pressure washer is permitted.
Sustainability
The systems are made predominantly of ferrous and non-ferrous metals and can therefore be disposed of in a scrap metal facility.
The PVC weights can be returned to Kee Safety Ltd for re-cycling.
34
Kee Safety Ltd
35
1 Boulton Road
Reading
RG2 0NH
United Kingdom
Tel: +44 (0) 118 931 1022
Fax: +44 (0) 118 931 1146
Email: [email protected]
www.keesafety.co.uk