Range

Weightanka

Wireanka

Accessanka

1

2

Class E

Deadweight

Anchor Device

to EN 795:1996

ISO 14567

Class E Deadweight

Anchor System

and Class ‘C’

Horizontal Lifeline

system

to EN 795:1996

Class B & E

Portable

Deadweight

Anchor system for

Rope Access

to EN 795:1996

Features

For roofs up to 5 degrees pitch

Suitable for wet or dry roof surface

Easy and quick assembly

Galvanised to BS EN ISO 1461

3

4

Base weights

Base weights fully encased in rubber

Rubber moulding means base weights aren’t prone to peeling

Unique design adds to performance

Reduces thermal bridging

5

Galvanised Counter weights

Each counterweight weighs 25kg and incorporate carrying handles

Different roof types require different Counterweight quantities

6

Placement

Ensure outside of Kee Anchor product is at least

2.5m from any roof edge, open void or fall hazard.

Do not position in areas where there is a risk of

contamination or accumulation of water, oil, grease

or algae

On Gravel covered roofs, brush gravel to allow

anchor bases direct contact with roof material

7

Placement

Suitable Roof TypesSuitable Roof TypesSuitable Roof TypesSuitable Roof Types---- Up to 5º Pitch

Concrete

Asphalt Mineral Felt

Stone

chippings

Single ply

membrane

(Smooth)

Steel cladding

8

Limitations

Use with suitable PPE

Ensure roof structure is suitable,

any doubts Kee Safety

recommends seeking the advice

of a structural engineer

9

Fall Restraint

Combination of anchor

position and PPE

supplied ensures no

user is able to reach a

position of 0.5m of any

roof edge, roof open or

other fall hazard

10

Cleaning/Storage

The assemblies should be kept clean, using detergent if necessary, by wiping or hosing down with clean water and dried.

Storage should be in a dry, chemically inert environment, away from sources of damage and

Store in such a way that dismantled products will not become lost or misplaced.

Where the Weightanka has been left

in position an optional cover is available.

11

Before installation

It is strongly recommended that installers

assemble and disassemble one in a place of

safety, away from the worksite to familiarise

themselves with the product

12

Class E Deadweight

Anchor Device to

EN 795:1996

ISO 14567

CE Certified to PPE

Directive

13

14

Portable, Non Penetrative, Temporary or permanent

solution

Ideal for Where Roof build up is unknown

No Roof Alterations required

Good for refurbishment projects

Quick to assemble

No part of the Weightanka weighs more than 25kg

15

Number Of Users

Fall ArrestFall ArrestFall ArrestFall Arrest---- Single User

RestraintRestraintRestraintRestraint---- Two Users

Tell Kee Safety at time of purchasing

Supplied with 2nd Eyebolt & Restraint PPE disc.

16

Number of weights

250kg (Six Galvanised weights) assembly for:

Asphalt/Mastic

Mineral Felt

Concrete

(Brushed) Stone chippings on Bitumen

300kg (Eight Galvanised weights) assembly for:

Single ply membrane (Smooth)

Steel cladding

(Brushed) Stone chippings on Asphalt/Mastic.

17

Stack weights

opposite each

other vertically

18

Assembly

TOOLS REQUIRED FOR

ASSEMBLY:

12mm A/F Hex

Allen key

19

Class ‘E’

Deadweight Anchor System

and Class ‘C’ Horizontal

Flexible Lifeline

to EN 795:1996 and

BS 7883

CE Certified to PPE

Directive

20

21

Non penetrative EN795 ‘Class C’ Wire cable

system

Allows users to be continuously attached

Up to 15 m spans

For temporary or permanent installation

No need to water proof

System incorporates corners

Fall arrest or restraint

22

Non penetrative EN795 ‘Class C’ Wire cable

system

Allows users to be continuously attached

Up to 15 m spans

For temporary or permanent installation

No need to water proof

System incorporates corners

Fall arrest or restraint

23

Layout options

SINGLE EXTREMITY ANCHORS

Fall Arrest for a single user

-Or alternatively-

Fall Restraint for up to 3 users

(maximum 2 users in a single span)

24

Layout options

DOUBLE EXTREMITY/CORNER ANCHORS

Fall Arrest for 2 users in separate spans

25

Edge distances and maximum spans

FALL ARREST SYSTEMS

FALL RESTRAINT

Maximum 10 m spans

Minimum edge distance of 2.5m

15m12m10m8m6m5mMaximum span

7.2m6.6m6.2m5.8m5.4m5.2mMin. Free Fall Distance

4.0m4.0m3.0m3.0m2.5m2.5mMin. Edge Distance

26

Portable Deadweight System for Rope Access

Conforms to BS EN 795,

& ISO 14567 class B&E

CE Approved to PPE Directive

Single user for Roped Access applications

Two users in a rescue situation

27

28

Separate anchor points for working

line and back up line

Internal force balanced system allows

the assembly to remain static.

Requires no attachment to structural

members

Easily moved across roof surface,

removing need for multiple

attachment points

Rope lines held away from edge of

building reducing risk of abrasion

29

Used with a 250kg Weightanka

Assembly for any roof type

Sold separately for use with

existing Weightanka or as

complete system

Aluminium, galvanised and rubber

coated parts

Minimum maintenance

Provides full fall arrest protection

before approaching edge

30

Usage

Accessanka is an accessory to Weightanka and must

always be used in combination with it.

This combination provides a mobile deadweight

anchor device for use in rope access systems in

accordance with:

Industrial Rope Access Trade Association (IRATA)

guidelines

and/or:

BS7985:2002 – Code of practice for the use of rope

access methods for industrial purposes

31

More information

Identification labels

Assembly and operating instructions

Sales Literature

Sales team

Technical support

www.keesafety.co.uk

Kee Safety Ltd

32

1 Boulton Road

Reading

RG2 0NH

United Kingdom

Tel: +44 (0) 118 931 1022

Fax: +44 (0) 118 931 1146

Email: sales@keesafety.com

www.keesafety.co.uk