Effecta AB, V:a Rågdalsvägen 21, 434 96 Kungsbacka, Sweden. tel: +46-300-223 20 e-mail: info@effecta.se www.effecta.se

EFFECTA VACEFFICIENT SOLAR HEATING

DIFFERENT SIZES

Effecta vacuum collectors are available in two dif-ferent sizes and fits most different kinds of houses. They can be mounted either directly on the roof or on the wall.Our collector is one of the most common around Eu-rope, manufactured in Germany. That is why this is a product with top efficency and a reasonable low price. The quality and design are of course top of the line in the market of solar collectors.

MODERN SOLAR COLLECTORS

The advantages with a vacuum collector compared to a flat collector is that you get a more even intake of solar energy around the year. This is because of

the collector is more efficient during spring and au-tumn than the flat collector. The reason for this is the vacuum isolation around every absorber in the collector. Also there is a well designed reflector pla-te placed behind the absorbers to increase the effi-cency even more. The low loss of energy results in more energy in the buffer tank. The collectors frame, reflector and absorber are made of alumi-num. The inside copper tubes have a minimum of joints. The connections on the outside are well insulated for less energy losses.

Every detail are of highest quality and finish. Straps for car-rying and pre-assem-blied connections are features for an easy mounting.

The latest technolo-gies are integrated in the Effecta Vac for the best heat trans-fer to the fluid in the collector.

Height mm 1640 Connection diameter mm 15/15

Length mm 1390/2008 Glass tube material -- borosilicate 3.3

Depth mm 100/100 Volume liter 1,6/2,4

Number of evacuated tubes 12/18 Hailstone test according to DIN EN 12975-2 TÜV test no. 435/142448

Gross surface area m² 2,28/3,41 Thermal shock test TÜV test no. 06COL513/1

Aperture area m² 2,0/3,0 Max. working overpressure bar 10

Yield forecast/ Würzburg, Germany, aperture area 3 m2) kWh/m2a 596 Max. stagnation temperature cº 295

Weight kg 37 /54 DIN CERTCO - Register number -- 011-7S113R

The reflectors helps supplying maximum power on a limited area, not any extra space between the vacuum tubes needed.

Effecta AB V:a Rågdalsvägen 21, 434 96 Kungsbacka, Sweden. tel: +46-300-223 20 e-mail: info@effecta.se www.effecta.se

EFFECTA ST2RELIABLE SOLAR ENERGY

THE COLLECTOR THAT HAS BEEN AROUND

Effecta ST is a well tried solar collector that has been tested hard in Swedish climate for more than 25 years. Now we have devoleped it and the second generation is here Effecta ST2The collector is made completely in materials re-sistant to rust and has a calculated life span of 40 years. Effecta ST2 collects about 463kWh/m² and year and also has easy-to-mount mounting details that makes the collector possible to position on al-most any roof.

HIGHEST QUALITY

Effecta ST was the first solar collector to be mass produced in Sweden and has been delivered to the market since the beginning of the 80:s and are today mounted on roofs all over Europe. The construction have a simplicity and reliability built in which is ne-cessary to have a good economy during the whole life span of the heating system.

Control system

With Effectas solar control-ler you get the opportunity to control your solar system at an optimum level. The con-trol system has lots of diffe-rent programming options to suit the most needs. It for in-stance controls the speed of the pump depending on how much sun that shines on the collector. This makes the ef-ficency higher and also creates a more even tempe-rature in the buffer.

The pane is easy to mount

Thick insulation helps increasing the efficency.

Height mm 2064 Connection diameter mm 22

Length mm 1154 Weight kg 38

Depth mm 98 Volume liter 1,28

Gross surface area m² 2,71 Thermal shock test yes yes

Aperture area m² 2,21 Max. working overpressure bar 10

Yield forecast/ Borås, Sweden, aperture area 2,51 m2) kWh/m2a 433 Max. stagnation temperature cº 192,3