fall 2014 course slo assessment report - 4-column 2014 course slo assessment report - 4-column el...

2
FALL 2014 Course SLO Assessment Report - 4-Column El Camino College El Camino: Course SLOs (IND) - Welding Course SLOs 1 and ctu.unitid = 756 Assessment Methods & Standard and Target for Success / Tasks Results Action & Follow-Up ECC: WELD 28 - American Welding Society (AWS) D1.1 Certification Test Preparation - SLO #1 Preparing for Certification Exams - Students will be able to locate and use charts, index and table of contents to answer open book questions to prepare for the exam. Course SLO Assessment Cycle: 2014-15 (Fall 2014) Input Date: 11/29/2013 Course SLO Status: Active Assessment Method Description: Given a timed test allowing 3 minutes for each multiple choice question, students should be able to successfully locate and answer D1.1 Code questions at the expected passing rate of 70%. Assessment Method: Exam/Test/Quiz Standard and Target for Success: For a timed test allowing 3 minutes for each multiple choice question, the expected passing rate is 70%, the minimum pass rate for the LA City written practice exam. 02/27/2014 - A timed test allowing 3 minutes for each multiple choice question. 87% of students could successfully locate and answer D1.1 Code book questions at the expected passing rate of 70%. 13% fell below the passing rate of 70%. 10% of these students who did not meet the minimum pass rate for the LA City written practice exam was due to nerves that result from a timed test, mathematical error in min/max questions, or difficulty picking out the subject of word problem. The remaining 3% did not invest enough time to mark their book or understand the utilization of charts to the question being asked. I now introduce many AWS charts throughout my intermediate course to introduce the importance of the information before they reach this advance course. Standard Met? : Yes Semester and Year Assessment Conducted: 2014-15 (Fall 2014) Faculty Assessment Leader: Renee Newell Faculty Contributing to Assessment: Renee Newell 04/23/2016 - Suggest a time management class to students, which could help the 13% not meeting the minimum pass rate of 70%. Also, introduce many AWS charts throughout my intermediate course to introduce the importance of the information before they reach this advance course. Action Category: Teaching Strategies ECC: WELD 45 - Structural Fabrication - SLO #1 Safe Setup & Operation - Students will be able to demonstrate the safe set up and use of various welding and cutting apparatus. Course SLO Assessment Cycle: 2014-15 (Fall 2014) Input Date: 04/07/2015 Course SLO Status: Active Assessment Method Description: Performance exam relating to the set-up of various equipment when part fit-up has choices of process and electrodes. Assessment Method: Performance Standard and Target for Success: Accomplish task with 87% accuracy. 04/14/2015 - 95% of students accomplished the task as judged by their accuracy in evaluating the piece and setting the machine to the correct settings. Standard Met? : Yes Semester and Year Assessment Conducted: 2014-15 (Fall 2014) Faculty Assessment Leader: Renee Newell 04/14/2016 - Continue to monitor performance for student success and outcomes. Action Category: Teaching Strategies ECC: WELD 45 - Structural Fabrication - SLO #2 Job Skills - Students will be prepared to demonstrate job skills required for fabrication layout Course SLO Assessment Cycle: 2014-15 (Fall 2014) Input Date: Assessment Method Description: Utilizing print, student will examine first task, measurements and machining required before fitup. Assessment Method: Laboratory Project/Report Standard and Target for Success: 02/10/2015 - 72% of students were capable of achieving final task 24% just fell under the desired outcome. 4% did not perform well. They missed demonstrations & their math skills were not up to standards Standard Met? : Yes 04/23/2016 - Propose to the 24% that they review fractions to assist in their translation of print reading and final measurements. The 4% that failed this skill performance also lacked the math background as well as missing 04/30/2015 6:33 PM Generated by TracDat a product of Nuventive. Page 1 of 2

Upload: truongquynh

Post on 28-Mar-2018

214 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: FALL 2014 Course SLO Assessment Report - 4-Column 2014 Course SLO Assessment Report - 4-Column El Camino College ... WELD 28 - American Welding ... to successfully locate and answer

FALL 2014 Course SLO Assessment Report - 4-ColumnEl Camino College

El Camino: Course SLOs (IND) - Welding

Course SLOs 1 and ctu.unitid = 756 Assessment Methods & Standard and Targetfor Success / Tasks Results Action & Follow-Up

ECC: WELD 28 - American Welding Society(AWS) D1.1 Certification Test Preparation - SLO#1 Preparing for Certification Exams - Studentswill be able to locate and use charts, index andtable of contents to answer open book questionsto prepare for the exam.Course SLO Assessment Cycle:2014-15 (Fall 2014)

Input Date:11/29/2013

Course SLO Status:Active

Assessment Method Description:Given a timed test allowing 3 minutes for eachmultiple choice question, students should be ableto successfully locate and answer D1.1 Codequestions at the expected passing rate of 70%.Assessment Method:Exam/Test/QuizStandard and Target for Success:For a timed test allowing 3 minutes for eachmultiple choice question, the expected passingrate is 70%, the minimum pass rate for the LACity written practice exam.

02/27/2014 - A timed test allowing 3 minutes for eachmultiple choice question. 87% of studentscould successfully locate and answer D1.1 Code bookquestions at the expectedpassing rate of 70%. 13% fell below the passing rate of70%. 10% of these studentswho did not meet the minimum pass rate for the LACity written practice examwas due to nerves that result from a timed test,mathematical error in min/maxquestions, or difficulty picking out the subject of wordproblem. The remaining 3%did not invest enough time to mark their book orunderstand the utilization ofcharts to the question being asked. I now introducemany AWS charts throughoutmy intermediate course to introduce the importance ofthe information before they reach this advance course.Standard Met? :YesSemester and Year Assessment Conducted:2014-15 (Fall 2014)Faculty Assessment Leader:Renee NewellFaculty Contributing to Assessment:Renee Newell

04/23/2016 - Suggest a timemanagement class to students, whichcould help the 13% not meeting theminimum pass rate of 70%. Also,introduce many AWS charts throughoutmy intermediate course to introduce theimportance of the information beforethey reach this advance course.

Action Category:Teaching Strategies

ECC: WELD 45 - Structural Fabrication - SLO#1 Safe Setup & Operation - Students will beable to demonstrate the safe set up and use ofvarious welding and cutting apparatus.Course SLO Assessment Cycle:2014-15 (Fall 2014)

Input Date:04/07/2015

Course SLO Status:Active

Assessment Method Description:Performance exam relating to the set-up ofvarious equipment when part fit-up has choicesof process and electrodes.Assessment Method:PerformanceStandard and Target for Success:Accomplish task with 87% accuracy.

04/14/2015 - 95% of students accomplished the task asjudged by their accuracy in evaluating the piece andsetting the machine to the correct settings.Standard Met? :YesSemester and Year Assessment Conducted:2014-15 (Fall 2014)Faculty Assessment Leader:Renee Newell

04/14/2016 - Continue to monitorperformance for student success andoutcomes.

Action Category:Teaching Strategies

ECC: WELD 45 - Structural Fabrication - SLO#2 Job Skills - Students will be prepared todemonstrate job skills required for fabricationlayoutCourse SLO Assessment Cycle:2014-15 (Fall 2014)

Input Date:

Assessment Method Description:Utilizing print, student will examine first task,measurements and machining required beforefitup.Assessment Method:Laboratory Project/ReportStandard and Target for Success:

02/10/2015 - 72% of students were capable ofachieving final task24% just fell under the desired outcome.4% did not perform well. They missed demonstrations& their math skills were not up to standardsStandard Met? :Yes

04/23/2016 - Propose to the 24% thatthey review fractions to assist in theirtranslation of print reading and finalmeasurements. The 4% that failed thisskill performance also lacked the mathbackground as well as missing

04/30/2015 6:33 PM Generated by TracDat a product of Nuventive. Page 1 of 2

Page 2: FALL 2014 Course SLO Assessment Report - 4-Column 2014 Course SLO Assessment Report - 4-Column El Camino College ... WELD 28 - American Welding ... to successfully locate and answer

Course SLOs 1 and ctu.unitid = 756 Assessment Methods & Standard and Targetfor Success / Tasks Results Action & Follow-Up

02/07/2015

Course SLO Status:Active

75% of students will achieve level 3 of the rubric. Semester and Year Assessment Conducted:2014-15 (Fall 2014)Faculty Assessment Leader:Renee NewellFaculty Contributing to Assessment:Renee Newell

demonstrations that would have assistedthem in achieving a better result.

Action Category:Teaching Strategies

04/30/2015 6:33 PM Generated by TracDat a product of Nuventive. Page 2 of 2