flexo vs. gravure in packaging printing - era.eu.org · flexo vs. gravure in packaging printing...
TRANSCRIPT
-
Flexo vs. Gravure inPackaging Printing
Flexo vs. Gravure inPackaging Printing
Dr. Martin Dreher DFTA-TZ, Stuttgart
ERA European Rotogravure AssociationPackaging Conference
11-12 October 2006, Osnabrck, Germany
-
Disclaimer
Please mind that the version of this presentation at hand had tobe composed at a point in time when some important input data may have not yet been available.
Therefore, this presentation may not reflect the latest known status of the subject.
Please check for potential later versions under www.dfta-tz.de or contact the author directly under [email protected].
-
Speaker
Name: Dr. Martin Dreher Position: Assistant Manager of DFTA-TZ,
Stuttgart (Technology Centre of the German Flexo Technical Association), designated Scientific Leader
Experience: 22 years in printing industry: apprenticed litho pressman, >16 years of work in Flexo, >20 years of observing Gravure and others
Job Tasks: Training, education, technical assessments, technical developments, presentations, etc.
Mission: advancing and enhancing packaging printing (1)
(1) holding what is probably the last fundamental printing patent about a hybrid system between Gravure and Flexo, later in this presentation to be referred to as a Hybrid Printing Method
-
Flexo vs. Gravure inPackaging Printing
Intro and Preface
Technical aspects What makes Gravure and Flexo tick?
Market shares
Cost The differentiating factor in an ever more cost-sensitive world.
Outlook What may change the game?
Closing
-
Preface
Some of the following pieces of information have been derived from other than my own sources. They have been marked accordingly.
Such information will be passed on as direct as possible, i.e. some data had to be generalised or anonymised because the underlying studies and calculations contained information that was private to the sender.
I will give my personal ratings and comments about such data as direct and unbiased as possible.
-
Flexo vs. Gravure inPackaging Printing
Intro and Preface
Technical aspects What makes Gravure and Flexo tick?
Market shares
Cost The differentiating factor in an ever more cost-sensitive world.
Outlook What may change the game?
Closing
-
The Technical Status Quo
Lithography and other printing methods to be set aside here.
Both Flexo and Gravure have their particular strengths and weaknesses.
The following review relates to the respective characteristics as they are perceived in packaging printing.
Flexography LithographyGravure
-
Flexographys Strengths
Less expensive process
Versatility in substrates
Flexibility due to exchangeability of parts of the print design
Easy and simple plate making
Good sharpness of bar codes, type and linework
Best revolution-to-revolution registration even with thinnest substrates due to CI presses
-
Flexographys Weaknesses
Increasing cost due to growing quality demands in Anilox rollers, printing inks, printing forms, tapes, etc.
Limitations in Packaging Design
Sporadic limitations in print quality due to: Squeezed ink
Lack of coverage in solids
High dot gain
Insufficient uniformity of print production
-
Gravures Strengths
Simple schematic of printing presses
Any (odd) repeat length
Typically very good print quality in images
-
plate making is demanding due to: treatment of metals
handling of massive metal cylinders
limitations in imaging systems, etc.
Lack of flexibility due to long delivery times and missing exchangeability of design elements
Uniformity and repeatability quite demanding (larger impact of substrate surface characteristics than in Flexo)
Limited sharpness of type and linework
Registration concerns with flexible substrates (revolution-to-revolution)
Gravures Weaknesses
-
Characteristics of Flexo & Gravure
FLEXO
Solids and process may need to be separated
Limitations in reverse and fine type work (improvements due to C to P and DD technology)
Can print up to 150 lpi
Closed solids need correct combination of plate, tape and ink
Due to plate elasticity and tolerances, reproducibility is largely dependent on prepress conditions and operator skill.
GRAVURE
Ability to print solids, type and process on the same print station
Ability to print fine type and line work (further improved via laser technology) down to 1 point text.
Can print process work up to 250 lpi
Can produce rich colors in solids and achieves excellent brilliancy
Excellent reproducibility, largely independent of operator skill
From: Gravure vs Flexo - Cost Comparison, PLGA
-
My Conclusions and Ratingson the Technical Aspects
I do agree with some of the above statements (see markers).
However, I do strongly oppose the overall notion of these statements!
Neither is Gravure that advanced overall, nor is Flexo that handicapped on average!
-
Flexo vs. Gravure inPackaging Printing
Intro and Preface
Technical aspects What makes Gravure and Flexo tick?
Market shares
Cost The differentiating factor in an ever more cost-sensitive world.
Outlook What may change the game?
Closing
-
Flexible Packaging by Process and Region
North America $175MM
Europe $240MM
Asia Pacific $132MM
South America $49MM
Source: Courtesy of DuPont Cyrel Global Print Form Market $595MM
Gravure23%
Flexo75%
Gravure41%
Flexo57%
Gravure85%
Flexo10%
Gravure18%
Flexo82%
Flexo dominated Gravure dominated
-
Market Share Interpretations
Flexo drastically outnumbers Gravure in North America and South America. Gravure is the underdog, hence the aforementioned aggressive statements.
In Asia, Gravure is almost unrivalled in its market share and standing. However, that has been sponsored in the past by environmental legislation being less harsh than in EU and the Americas which enabled less expensive, but more hazardous plate making techniques (etching) to be used.
In Europe, Flexo enjoys the largest market share, but is being challenged by Gravure constantly.
-
Flexo vs. Gravure inPackaging Printing
Intro and Preface
Technical aspects What makes Gravure and Flexo tick?
Market shares
Cost The differentiating factor in an ever more cost-sensitive world.
Outlook What may change the game?
Closing
-
In Summary: Advantage Flexo
Source: Courtesy of DuPont Cyrel
-60% -40% -20% 0% 20% 40% 60% 80% 100% 120% 140% 160% 180% 200% 220% 240% 260%
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
Gravure vs. Cyrel round
Gravure vs. Flexo
Advantage Fle xoAdvantage Gravure
-
Compact design of Flexographic Central Impression Cylinder press:
Less capital investment
Less labour cost
Lesser floor space requirements
Lesser energy requirements
=> Advantage of Flexo over Gravure
=> Very large advantage of Cyrel round over Gravure
Summary of Press Related Cost Factors
Source: Courtesy of DuPont Cyrel
-
Cyrel - analog plate on steel cylinder (incl. mounting)
Cyrel - digital plate on steel cylinder (incl. mounting)
Cyrel - Plate on Sleeve -adapter mandrel (incl. mounting)
Cyrel - Plate-on-Sleeve (inc sleeve)
Cyrel round
Flexo: Rubber direct Laser engraving (incl. Sleeve)
Flexo: Silicone Rubber direct Laser engraving (incl. Sleeve)
Gravure Cylinder: Imaging incl. Copper plating and Chrome plating (raw cylinder not included!)
Western Europe, /mTypical sizes: ~ 0.4 to 0.6 m
~ 250~ 350
~ 440
~ 500 - 800
~ 850
~ 800
~ 980
250 - 1100
0 200 400 600 800 1,000 1,200 1,400 1,600
Thin walled mylar sleeves, no composite, no bridge mandrels
Cyrel Flexo Fotopolymers
Print Forms: Typical Prices Where does HellGravures Cellaxy
sort in ?
Source: Courtesy of DuPont Cyrel
-
Plate Making fixed costs: Gravure: approx. > 80%
Flexo: approx. 60%
Capacities with high fixed cost drives prices and cost: Gravure cylinder makers must use their capacities (at any price)
Expansions of capacity are costly (large capital investment)
Cost of Flexo Plate Making: high portion of variable cost Flexo plate makers may expand and reduce their capacity more freely
Flexo is more flexible and open for innovation
Why this Large Range of Prices?
Source: Courtesy of DuPont Cyrel
-
Printing forms: comparable
Substrate waste: advantage Flexo
Printing inks: advantage Flexo
=> Small advantage of Flexo over Gravure
Summary of Variable Costs
Source: Courtesy of DuPont Cyrel
-
My Conclusions and Ratingson Cost Aspects
I do agree with most of the above statements. However, in that some of the perceived cost benefits that Flexo
enjoys over Gravure, are being based on the use of the (costly) Cyrel round seamless sleeves, it must be noted that the production capacities available for them in the EU market are currently insufficient for satisfying larger market demands (as is the case with direct Laser Engraving of Gravure cylinders).
Hence, such cost comparisons reflect only a small niche of the market.
The lions share of the packaging printing market will need to be compared upon the basis of electromechanically engravedGravure cylinders vs. digitally imaged Flexographic fotopolymerplates (then giving Flexo a somewhat smaller, yet noticeable cost advantage).
-
Flexo vs. Gravure inPackaging Printing
Intro and Preface
Technical aspects What makes Gravure and Flexo tick?
Market shares
Cost The differentiating factor in an ever more cost-sensitive world.
Outlook What may change the game?
Closing
-
Digitally Imaged Fotopolymer Sleeves
Digitally imaged Fotopolymer Flexo sleeves on the rise!
Some of the printing related advantages are short make-ready seamless designs higher press speed possible substrate savings
No plate mounting cost savings in personnel and machines time savings no mounting tape cost
New technical opportunities alternative halftone screens with less patterns and
less mottling through excellent registration (first time and continuous)
Cost of raw material is substantially higher than with plate materials, but will be more than compensated for by the aforementioned benefits.
-
Laser Engraved Gravure Cylinders
Laser engraving has been around for quite some time, but Hell Gravure SystemsCellaxy is about to re-heat the debate due toits capability of using Copper as a medium again.
Benefits should be Plating process may remain unchanged Very high engraving speed Versatility of engraving better structures
Aspects that remain to be seen areCost of ownership and runningReliability
Certainly a very interesting new alternative to look at.
-
Halftone Screening
Advantage of Flexo over Gravure due to Flexos superior registration quality of CI presses => Flexo may use new screening alternatives, which require good registration and, given that, may yield sharper printed pictures with
much less halftone-related structures and
a standardisation in screen angles, coupled with
production safety through much less sources of error.
-
Plastics as Gravure Print Forms
It has been attempted repeatedly to use high-tech and high-value plastics (in particular some Polyamides) for plate making in Gravure, thus trying to avoid the costly, environmentally critical and time consuming copper (or zinc) plating process.
None of the attempts has yielded a product that enjoyed noticeable market penetration so far. However, some trials are still in process.
Hence, whether or not such high-tech plastics will be successful in replacing metals remains to be seen.
I personally believe in the flexible Gravure form approach, i.e. using elastic materials, which do open up a whole new line of thought ...
-
Hybrid Printing Method
Working title used to be Helioflex*, reflecting the combination ofGravure and Flexo
Soft and elastic printing plate Plate making through fotopolymerisation (exposure!) feasible, utilising Flexo
printing plate materials Special doctoring system plate making preferably with Flexo plates or seamless sleeves Imaging with special Gravure-adapted positive (vs. negative) colour
separation plate making even easier and cheaper than in Flexo due to shallow relief High definition of type and linework with autotypical imaging methods (film
or platesetters) Rasterisation methods of Flexo applicable Optimum ink transfer - ink is squeezed out of cells through elasticity
Building a CI Gravure press is feasible
* this title has been brand protected by Hell Gravure Systems later and therefore must not be used any more, but older documents may still refer to the process under this name
-
Digital Printing Methods
We have a saying in the German language: Wenn zwei sich streiten, freut sich der Dritte. (If two struggle with one another, a third party is happy.)
Hence, if Flexo and Gravure struggle with one another, will DigitalPrinting be the happy winner?
What are the benefits that Digital Printing can claim? No plate making times and cost factors Design change flexibilities
Disadvantageous factors are:Limited applicability (sizes, substrates etc.)High cost (specially treated substrates, costly inks, etc.)
My personal conclusion: Digital printing methods will have to go a very long way before they may challenge conventional methods in more than isolated market niches! Digital printing will be complementing conventional methods for quite a number or years to come.
-
Flexo vs. Gravure inPackaging Printing
Intro and Preface
Technical aspects What makes Gravure and Flexo tick?
Market shares
Cost The differentiating factor in an ever more cost-sensitive world.
Outlook What may change the game?
Closing
-
Closing
Technical benefits of either Flexo or Gravure over one another may be identified, but can only be weighed in light of particular print jobs.
The best achievable print qualities of either printing method are on a par, the average print quality level is typically higher with Gravure.
Cost, versatility and ever shortening-runlength aspects do speak forFlexo as the preferred method and the increased penetration of the digitally imaged fotopolymer sleeves is likely to enhance this trend.
However, is the cost advantage of Flexo over Gravure still large enough to make an established Gravure printer invest in flexographic printing equipment? Maybe not.
On the other hand, is the overall print quality benefit of Gravure overFlexo still large enough to make a Flexo printer invest in Gravureprinting equipment? Again, maybe not.
Therefore, we have something like an impasse situation now.
-
Closing (continued)
Admittedly, I am a Flexo proponent. In being so, I certainly dont needto apologize for anything Flexo wouldnt be capable of doing (quality,flexibility etc.), particularly in light of the further advancements that Flexo is about to enjoy.
Nonetheless, I am far from declaring victory! When considering the overall level, Gravure is certainly the quality leader.
We have experienced a time of struggle between the Flexo andGravure printing methods in packaging printing.
Instead, I am advertising a peaceful co-existence of both the major packaging printing methods, Flexo and Gravure, for the purpose of advancing packaging printing as such. Please join me in this effort!
-
The Future comes step by step. Thats what makes it
endurable.
Alfred Polgar
The Last Word
-
Flexo vs. Gravure inPackaging Printing
Flexo vs. Gravure inPackaging Printing
Thank you very much!
Dr. Martin Dreher DFTA-TZ, Stuttgart
ERA European Rotogravure AssociationPackaging Conference
11-12 October 2006, Osnabrck, Germany