flo tite product selection guide

BALL VALVESFROM SIMPLE TO COMPLEX DESIGNS

SG-2018

A Guide ToManual And AutomatedBall ValvesFlo-Tite Offers A Complete Line of High Quality Engineered Ball Valves For Your Most Demanding Applications

• Sanitary Valves

• Cryogenic Valves

• Automated Valves

• Fusible Link Valves

• Cavity Filled Valves

• V-Port Control Valves

• Dribble Control Valves

• Instrumentation Valves

• Steam Jacketed Valves

• Flush Bottom Tank Valves

• Severe Service Metal Seats

• 3 And 4 Way Multi-Port Valves

• Pipeline Trunnion Type Valves

• Segmented Control Valves

• Custom Designed Ball Valves

• Electric, Pneumatic Actuators & Controls

se habla español

www.flotite.com

• Full compliance with API-6D• ISO 9001, CE & NACE• Grease sealant fitting standard• Fully welded bodies designs• Size range 1” - 42”• ANSI Class150, 300, 600, 900, 1500, 2500• High temperature metal seated• NACE requirements• Piggable service• Control ball valve & half ball• 3-way designs• Double Block & Bleed• Both Cast & Forged

• Custom Designs Welcome!

Trunnion Type Ball Valves

Tech Bulletin page 80

www.flotite.com2

Flo-Tite TM Series

Designed and Fabricated for Pipeline Applications Offering both forged 3pc and cast 1 & 2 pc body designs

Design Features

3 Way 10"

Segmented Type Control Valves

Exploded View Sentinel Series

Precise Control

Segmented Control ValvesISA S75.04Rugged unibody Construction Available in Flanged or Wafer 150, 300 & 600 LBsMetal or Soft SeatedSize Range 3/4" - 24"

Engineered Valves for Pipelineand Severe Service Applications

I-SO Mount

This series is our most versatile design. Series 200/300 ball valves are offered in Threaded, Socket Weld, Butt Weld, Flanged End, and extended Weld Ends. The Valve center body is drilled and tapped for cap screw bolting to assure exact alignment.

Design Features

Cap ScrewsMake thedifference

• 1500 WOG/150 WSP• Live loaded stem• V-Ring stem packing• Anti-Static grounding device• Size Range 1/4 Thru 12 inch• I-SO-Mount automation pad• Safety locking handle

• Wide range of seating materials• V-Ball control valves• Cavity fillers• Carbon, stainless steel, Alloy 20 and many

other special materials• Secondary media containment• Flush bottom tank

Model 310Tech Bulletin page 45

Multi-Choice Series

High Performance-3 Piece Designs

• Safer Installation• Reduced Liability• Save Valuable Time• Reduce Labor Cost• Assures Fool - Proof Installation• Socket & Butt-Weld Design

Multi-Choice Series Weld - in - Place

Eliminate Valve disassembly when welded ball valves are required!

Design Features


I-SO Mount

• 1/4” thru 4” 2250 PSI/WOG• 1/4” thru 1” 3000 PSI/WOG (Reduced Bore)• Fire safe designed to API 607-7• ANSI B16.34• Protected seat design• Captive seats & body seals• Weld-in place socket & butt weld• Flanged end ANSI class 300 and 600• Metal seats - both class V & VI

HPHPF42

Tongue & groove design ensures accurate alignment of body & end connections

Tri-Pro Series

High pressure 3 Piece Series built for demandingng applications such as petrochemical, power, oil andand gas, pulp and paper, and many other industrial process applications.Both Full & Reduced Port Models

Design Features

Shown with optional stem extension

Size 1 1/2"

Size 3"

www.flotite.com 3


Titan Series

• ANSI Class 900 & 1500 Raised Face & RTJ Flange

• 5000 PSI/WOG Threaded & Weld End Connections

• V-Port Control Option• Devlon Seats Standard• Peak & Metal Seat Options• Fire Safe API 607-7, API 608


Pro-Max Series

Tech Bulletin page 48Model 360

DM - Series

• ISO-5211 Top Works - Live Loaded Stem

• 2 PC body 1000 PSI/WOG DM85

• 2 PC body - 2000 PSI/WOG Fire Safe Design

• 2 PC Flanged End DMF150

• 3PC DM 110/120 1000 PSI/WOG

• 3 Way - DM - MPT 100

• Wafer DM - WF150• Valve Sizes Range from 1/2" - 3"

Direct Mount Options

• Flo-Tite economical 3pc valve• Reduced port• Available with NPT or socket weld ends• 2000/1500 WOG• RPTFE seals

• Enclosed bolting• ISO 5211 mounting pad• Safety locking handle• CE compliance• Fire safe certified

Engineered Valves for High Pressure Applications

High Performance-3 Piece Designs

Tech BulletinTech Bulletin page 37-17

V Ball Options Available

Direct Connect Series is Tailored for low cost easy actuator mounting.

Detail of protected seat and encapsulated body seal design. Isolates and protects both seats and seals from flow path. Helps

prevent cold flow

Leak Detection Passage Prevents actuator damage in the unlikely event of stem leakage

Unique design provides easy adjustment of stem packing even when direct mounting of actuator is used.

4 www.flotite.com

• ISO type mounting pad• Safety locking handle• Anti-Static grounding device• ANSI Class, 150, 300, 600• Special metal seats meetingclass V & VI

• Cavity fillers size 1/2 thru 12 inch• Complete size range 1/2 thru 14 inch• Fugitive Emissions Per - ISO - 15848-1• V-Ball control valves• Fire Safe-API 607 and NACE requirements

• API 6D logo

Full-Flo Series

Full BoreUni-Flo Series

Standard Bore

Flanged End Ball ValvesI-SO Mount

Model F150 Full Port Tech Bulletin page 58

2PC Full Bore Tech Bulletin page 60

Design Features

1PC SF150 Reduced Bore Tech Bulletin page 58

Flo-Tite offers a complete range of Flanged End Ball Valves in both floating and trunnion type designs. Available in both carbon, stainless steel, Alloy 20, duplex stainless steel and many other special materials.

EC SeriesLow Cost Design

UNI-FLO Series

EZ Series2 PC Reduce BoreTech Bulletin page 58

Petro Series F60Tech Bulletin page 69

API 6D Certified Floating Ball Valves

• Fugitive emissions• Maintenance Repair• High Temperature Applications

Media Containment A w a r d W i n n i n g P r o d u c t

Multi Purpose Secondary Containment

Tech Bulletin page 140-15

Upgrade standard Ball Valveswith a simple low cost device.

www.flotite.com 5

Multi-Port 3 & 4 Way Ball Valves

Flo-Tite offers a wide selection of multi-port ball valves designed to simplify piping systems, eliminating the need for 2 or more standard valves. The valve has either one or 2 pc ball/stem with a trunnion type Ball Support, T, L, or LL Flow Plans. I-SO-Mount Actuator mounting pad is standard.

• 3-Way diverter design• 1500 WOG fire safe type• Threaded / SW / BW / Flanged• Size Range 1/2” − 2 1/2”

• 3-Way diverter design• Ideal replacement for plug valves• Class 150/300, size 2”, 3”, 4”, 6”

Tech Bulletin page 98Model 3W-HPF

Tech Bulletin page 96Model MPF155

Tri-ProBottom Flow Series


Multi-Port Series

MPT-100 Series

Ball Porting Bottom Entry Series

Model MPT 100

Model

MPF15MPF30

MPT30 MPC15MPF154

Type

150 LB. flanged end 300 LB. flanged end 600 LB. flanged end Threaded endTri-Clamp ends4-Way

3-Way trunnion designs also available

Size Range3/4 thru 12”

Tech Bulletin page 1003 & 4 Way

Many Different Flow Patterns Are Available

• Stainless steel• 3 way diverting or mixing• Standard port design• Threaded ends / Tri-Clamp• Working pressure 800/1000 PSI/WOG• Optional Brass T + L ports model # 355/365• Size Range 1/4” − 3”

6 www.flotite.com

Multiple Flow Plans

ISO Mounts standard.

MPT60

Model MPF 15

Unique Application Design Ball Valves

• Available cryo bonnet tall stems• One Piece High Strength stems• Reaching temp. down to -320oF• Flanged end 150/300/600• NPT / SW / BW / 3PC Flanged End Design Ball Valves• Sizes 1/4” − 18”


CRYO-SERIES

Cryogenic Design Ball Valves

Flush Bottom Tank Valves

Model S370

Model S350


Multi Choice Sanitary Designs

Valve tank pad is welded flush to the tank bottom for unrestricted drainage of tank media. Available with threaded, SW / BW / flanged end 150/300

Tank pad All 316L-SSSize Range 3/4” − 8”

Model TK300


Safety Exhaust 3PC Valve

Offers downstream air pressure “blow-down” design valve with complete service-ability without disturbing the piping system.

AirSupply

PowerDevice

www.flotite.com 7

I-SO Mount3PC sanitary ball valves with true tube bore clean-in-place, purge ports. 20-25 RA standard.Electropolish, solution clean & bagged, optional.All wetted parts SS316L.Cavity fillers available.In-Line orbital welding.Sizes 1/2” − 6”

6" F150Cryo Top

Spring Return HandleTech Bulletin page 145

Flo-Tite offers a complete line of cryogenic ball valves.

Industrial Process Threaded End Designs

• The Fusion series seal-welded high pressurevalves incorporate safety. All welded bodyassures that the 2pc body can never beseparated.

• Anti-Static, fire safe, API 608, Steam seals,Locking handle.

• ISO 5211 Actuator Mounting

Fusion Series

Flo Tron and Flo Tron II Series Model S3000

Tech Bulletin page 16• Rugged construction - Cast body• All welded bodyThis heavy duty valve is built for hydraulic andpetrochemical applications.

• S3000 - 3000 WOG / S6000 - 6000 WOG• Fire safe designed to API 607-4• Anti-Static Grounding

8 www.flotite.com

• Model T23 2pc Body• Model S23 1pc Body• 2000PSI / 1500PSI• 250 SWP• Size 1/4” − 4”

Tech Bulletin page 56-16For More Info

I-SO Mount

• 3 PC Body Design• All Stainless Steel Design• 1000 PSI/WOG• Sizes From 1 1/2" to 6"• Full Port Design

Econo-Groove Series

Design Features

Tech Bulletin pTech Bulletin page 14a

ONMI Series• UNI-body Design• Outstanding Low cost High Pressure Valve• Fire Safe Certified API 607-4• Double reduced bore fire safe certified• For higher pressure application• 316SS and Carbon Steel• Economical Solution• 1-pc body design• Size Range 1/2" - 2"

Model T12Tech Bulletin page 23

Model 190SS

• 25/carbon/PTFE Seats• 175 PSI/SWP• 2000 WOG

Size 4"

Kompact Series

• Full flanged wafercompact design


• Full port - size - 1/2”− 6”

I-SO Mount• Cavity filled• Steam jacket

• V-Port controlTech Bulletin page 111

www.flotite.com 9

ISO - Mount Threaded Holes

now available with custom designed v-cut options such as:15°, 30°, 60°, 90° and 120°

API608/API6D Compliant

• Flanged Type 150, 300, 600 ANSI Class• Wafer Design 150 LB• Control-Set 2PC - 1000 WOG• Segmented Design 150, 300, 600• 3PC All Types 1000, 2250, 5000 WOG

Port Control Series Most all of Flo-Tite's High Performance standard ball valves are V-

Custom Manufactured Ball ValvesSpecial Alloys

V-BALL CONTROL VALVES


Flo-Tite's control ball valves feature a solidstainless steel ball, not a seat insert like

many others.

Flo-Tite's Automation Brands

• 2 Piece Design Valves• Reduced Port• 1000 - MAWP/WOG• Male X Female Connections• 1/4" - 2"

Econoflo-Series


Forged Brass - Threaded & Solder Ends

Model T92BZTech Bulletin page 31

•

• Size 1/4” − 4”

• 600 WOG - 150 WSP• FM / UL / SR certificates• Lead Free Designs• Locking Options

• T70 - 2PC standard portport• 2000/1500 WOG• Size 1/4” − 3”

• T80 ball valves offer an economical solution forlow cost full port stainless steel 316SS/304SS

• 1000 WOG size 1/4” − 3”

T51BZ ball valves are ideal utilityy val valvesves for low pressure applications.

Commercial-Series


Economy Designs From Flo-Tite

hem - Series

• 3 Piece Body - Full Port Design• Threaded, Socket-Weld or ButtWeld Ends

• ISO Mounting Pad• 1/2" - 4" Sizes Available• 1000 MAWP/WOG

• UL Certification Available

Econoflo-Series 1 1/4" T45SS1/4" T45SS


1/2" 110

2" 110

Model 110 Tech Bulletin page 33-17

MaxGear Manual Gear Operators

• Fully Lubricate

• Weather Proof Housing• Grease Fittings Standard• Mounting Dimensions to ISO 5211• Locking Device Available

Model T80

Model T70

10 www.flotite.com

Model T82

3" 120

1/4" T40MxF

Metal Seated Valves

DESIGN FEATURES

Tech Bulletin page 114A-09

• Bolt on Jacket• Clamp on Jacket• Full Jacket• Compact Full Jacket

Steam Jacket Series

Flo-Tite’s valve jackets are designed for chemical service where absolute control of fluids is required within a specified temperature range. With special preparation, these valves can be used for severe and hazardous chemical service.

DESIGN FEATURES

• Flanged Type 150, 300, 600 ANSI Class• Wafer Design 150 LB• Control-Set 2PC - 1000 WOG• Segmented Design 150, 300, 600• 3PC All Types 1000, 2250, 5000 WOG

• Uni and Bi Directional Flows Tech Bulletin page 130-11

Surface treatments and coatings to withstand abrasion resistance.

• Tungsten Carbide • Chromium Carbide •Hard Chrome •Forged Stainless Steel Balls

Severe Service Valves Tailored to Your Applications

Metal Seated Ball ValvesEngineered Valves for Severe Service

Titan Series Tri-Pro Series Full-Flo Series Sentinel Series

High Temperature Designs up to 1000°F

3-Way Bolt on Type

2"Carbon Steel F150with Steam Jacket

www.flotite.com 11

Flo-Tite, Inc.4815 W 5th StreetLumberton, NC 28358

P.O. Box 1293Lumberton, NC 28359Website:www.flotite.com

Tel: (910) 738-8904Fax: (910) 738-9112E-mail: [email protected]

Flo-Tite, offers a complete package of pneumatic, hydraulic & electric actuators. All types of controls & accessories for a vast number of special automated applications

Air-Con Series

Designed for quarter-turn ball, butterfly & plug valves as well as damper applications. Incorporating the latest technology in actuator design.

Smart Positioner VAC

Hart, Fieldbus and Profibus

Easy-Link ISO

Mounting Hardware

Direct Design

Solenoid Valve

Max-Seal Butterfly Valves

VRC Series All Specials

Electric Actuators

Flo-Tite also offers a wide variety of Max-Seal Butterfly Valves.

This brochure is general in nature and manufacturer reserves the right to alter dimensions, materials or to make design improvements

8 www.flotite.com Print date 2018/01

All Types & Designs

304 StainlessHigh Chemical Resistance Housing

• Hard anodized aluminum body• Namur interface & ISO5211 Mounting• 5° - travel stops, optional 90° stops• Torque range up to 1,565,200 in-lbs• Optional Stainless Steel & Nickel Infused Available Specs :CE, ISO, ATEX, SIL3

flo tite product selection guide

Documents