Friday’s lecture again

Using E-TDD environment

• Build the tests you want to pass

• Build the code

• Test the code

Using E-TDD environment

• Using the C++ tests, build the ASM tests (cut and paste is all that is needed)

• Build the ASM stubs (Makes sure that you can load the load into the processor

• Test the code stub – program will run but fail the tests as only stubs

• Build the code

• Test the code

Build the stub 1Find the name mangling needed

• Just build the code

• VDSP will tell you the necessary name-mangled names

• Cut and paste the names

Build the stub 2

Expect error messagesBut not these ones

Code reviewMissing a ; at end of line

Need to learn to READAnd listen to assembler

That semicolon is notthe one that was missing

There is one semicolon too manyin the define statement

Less errors

But I am still notlistening to the assembler

Look on reference sheet

R0 *= R1;

Page 2, column 3

AssembledBut failed tests

What of GS is happening

Build the ASM test by cut-and-paste

Stubs assemble

But unexpected messages

Build the ASM test by cut-and-paste CORRECTLY

Wrong method

Incoming parameters – come in R0Outgoing parameters – go in R0

Return values – go in R0

Same problem on the MIPS