insitu o and coe flue gas analyzer
TRANSCRIPT
ENOTEC Inc. 6206 Sandy Ridge Circle NW
North Canton, Ohio 44720-6686
Tel: (+1) 330-498-0202 Fax: (+1) 330-497-9802 Email: [email protected] Web: www.enotec.com
Manufacturers of InSitu Oxygen & Combustion Analyzer "Energy Saving" Instruments for Industrial Applications. World Headquarters: ENOTEC GmbH Höher Birken 6, D-51709 Marienheide, Germany.
A Quality Assured BSI ISO 9000 Certified Company. ENOTEC® is a registered Trademark
COMTEC 6000InSitu Oxygen & Total Combustibles Analyzer
Typical Installations:Power Plants, Refineries, Cement Plants, Steel Mills, Chemical Industries, Food Industries, Pulp and Paper Manufacturers, Marine Boilers, and anywhere combustion control is required.
Unique Features and Performance:
InSitu MXP COe sensor measuringtotal combustibles in flue gases up to1112°F (600°C)
100% Gas-tight brazed MLT Oxygensensor operating at 1472°F (800°C)
Optimum combustion control of fuel/air ratio
Designed to upgrade existing oxygenprobe only systems
Maintenance free for several years
Fast process gas response - less than 3seconds with patented filter head
Simple menu setup, operation andsystem diagnostics
Tough, Reliable and Accurate
Quality German Engineering
InSitu O2 and COe Flue Gas AnalyzerUpgrade to COMTEC - the combustion optimizer
Think Safety!ENOTE C Flue Gas Analyzers simply outperform other systems with its unique InSitu design features measuring Oxygen and Total Combustibles (COe) in real time - inside the flue duct.Both sensors are located directly under the probe filter head inside the flue gas stream. There is no need for sampling, gas extraction, cooling, or filtering the gas stream. Filter blocking is not an issue, even in high dust applications. The system constantly measures inside the process displaying percent Oxygen and ppm combustible values for optimum combustion plant safety operation.
Unique Feature - Dynamic Dual Sensor Graphic Calibration The COMTEC system offers a simple automatic calibration feature for both sensors. They are calibrated at the same time using one bottle of certified test gas (typically 2.1% Oxygen and 1000 ppm CO). The system "zero" calibration gas is instrument air, with both gases conveniently supplied from the electronic unit, without any need to go to the duct mounted probe.
New Intelligent COMTEC® 6000 Flue Gas Combustion Analyzer
Real Time Display of both Oxygen and Total Combustibles (COe) Values
The ENOTEC Difference: The world's first InSitu O2/COe Combustion
Control AnalyzerThe sensors independently measure Oxygen andTotal Combustibles inside the duct for optimumcombustion efficiency, reducing fuel consumptionand minimizing harmful pollution.
100% Gas-Tight Brazed O2 Zirconium DiscSensor Design...ENOTEC sensors will not leak like ordinarycemented sensors. Cemented sensors mayleak reference air to the process side of thecell causing dangerous higher O2 readings!
OXITEC MXP COe Sensor Design...Patented electrochemical sensor developed byENOTEC to measure InSitu flue gas combustibles
Single Point Air/Air Calibration Check Facility...Reduces time and eliminates wasted test gas.
Exceptional Value and Low Cost of Ownership...The ENOTEC Industry Standard
Full 2-Year Complete System Warranty
Full 5-Year Oxygen Sensor WarrantyFull 2-Year Combustibles Sensor Warranty
Quality Engineering - Designed & Made in Germany