INSTRUCTION FOR ASSEMBLY

120x180 h Traditional sauna cabin

1. SAUNA PLAN

TOOLS REQUIRED: Hammer or pin nailer

Drill or cordless screwdriver

Tape measure

Square

Level

Handsaw

815

120x180 h TRADITIONAL SAUNACABINView from the top

291

120

0

1800

690

HEATER

SAWO MN-36NS

208x340mm

541

286

UPPER BENCH

LOWER BENCH

508

308

120

0

Control Unit

1115

2. BASE FRAME

There are 4 details for the base frame. Fasten the three corners together with the screws (4,0x30 mm).

Cross-measure from the corners to check that they are at straight angle. Correct the corners if necessary

and screw the last screw in. Check that the base frame is level using a spirit level.

BASE FRAME

DETAIL NR.1

DETAIL NR.2

DETAIL NR.3 DETAIL NR.3

152 250 1368

1770

11

70

1770

11

70

3. WALL ELEMENTS

WALL ELEMENTS B1 & B2

WALL ELEMENT E1

WA

LL E

LE

ME

NT

A1

750

800

1800

1686

WALL ELEMENTS1128

1185

WA

LL E

LE

ME

NT

C1

1128

1185

WALL ELEMENT D1

226

276

690

INTERIOR (Alternate):

There are 2 methods for fastening Your sauna wall elements:

EXTERIOR (standard):

4. CEILING ELEMENTS

Make sure that the ceiling elements fit on the top of the wall elements. Check also, that the tongue and

groove joints between ceiling elements are fastened properly to each other. You may need to lift the

elements a little at the joints to make them slide together. You may fix the ceiling elements with screws

(5,0x80 mm) also, if You think that is necessary.

CEILING ELEMENT 1 CEILING ELEMENT 2

Ventilation

876 924

120

0

120

0

5. DOOR

6. ELECTRICAL EQUIPMENT

Always use a certified electrician for any electrical work. Before installing heater and control unit follow

the manufacturer directions. This will prevent injury to you and the product. You may need to install the

control unit into a wall element. The sauna light should be installed under the bench. Use the silicone

cable for the sauna light.

Your sauna contains a high quality sauna door. Be careful when handling the door as the glass may break

if it is hit with a sharp object. At no time should the edge of the glass touch a hard floor or wall surface.

The door element is the last wall element. The door is fastened with screws (5,0x80 mm). There is sauna

door handle in your sauna kit. Cover the exposed holes with wooden covers. The door always opens out.

If it is necessary to change hanging, move the top rail to the other end. Put the door on the floor, unscrew

the upper plank's four screws, put the plank on the opposite side of the door and screw it up with the

same four screws.

For making the door move easily, regulate the roller-lock when needed. Also you can regulate

the door handle a bit.

7. BENCHES

cross-cut length

Bench support details: upper bench 28x42 730 5 pcs

lower bench 28x42 280 4 pcs

*There is one extra support detail (28x42x1000 mm) to support benches from the middle.

1. STEP : Fixing bench support

32

715

45

CROSS-CUT OF THE BENCHES

LOWER BENCH

280

435

788

508

730

UPPER BENCH

308

508

BENCH SKIRT

368

45

0

81

8

268

352

2. STEP : Fixing bench frames (screws 5,0x70 mm)

3. STEP : Fit in bench grid

8. BACKREST

9. HEATER GUARD

10. FLOOR GRID

After placing the benches, place the back grid. There are predrilled holes. Fasten the back grid using

screws (4,0x45 mm) and cover the screw holes with wooden covers.

Next step is the installation the floor grids. In your sauna, there is one floor grid with measures 470x680

mm. You do not need to it them with screws.

Place the heater guard around the heater. Use screws (5,0x70 mm) for fastening the heater guard to the

wall.

11. MOLDINGS

Fasten them with nails.

cross-cut length

Door moldings 12x42 1930 4 pcs.

Corner moldings 28x45 1930 4 pcs.

12. UPPER FRAME

Mount the upper frame on the floor and then lift it to the top of the sauna and fasten it to the ceiling

element using screws (4,0x30 mm) and metal angles

To give a finished appearance Your sauna install door and corner moldings.

UPPER FRAME

ECCENTRIC

1859

EC

CENTR

ICE

CCENTR

IC

12

59

ECCENTRIC

1859

ECCENTRIC

EC

CENTR

ICE

CCENTR

IC

12

59

ECCENTRIC

10