momentum press 2013 catalog

w w w . m o m e n t u m p r e s s . n e t

2013 CatalogO C T O B E R – D E C E M B E R

Solutions for the Engineering Community

Introduction ................................................................................................................ 1

Forthcoming: October through December, 2013 ................................................. 2

Biomedical and nanomedical Technologies ..................................................................................2

civil engineering ................................................................................................................................................ 3

manufacTuring engineering ...................................................................................................................... 3

maTerial science and engineering......................................................................................................... 4

mechanical engineering ............................................................................................................................... 5

Recently Published: January through August, 2013 ........................................... 6

Biomedical and nanomedical Technologies ..................................................................................6

civil engineering ..................................................................................................................................................7

environmenTal science and engineering .......................................................................................... 8

manufacTuring engineering ......................................................................................................................9

maTerials science and engineering ....................................................................................................11

mechanical engineering .............................................................................................................................11

Published in 2012 ..................................................................................................... 14

Backlist: ...................................................................................................................... 17

Contact Us .................................................................................................................. 25

Contents

800.689.2432 • momentumpress.net 1

Introduction

October 1, 2013

in this catalog, you’ll find new titles in science, engineering, and applied technology, writ-ten for practitioners, researchers, faculty, and students. in 2013, we are continuing to bring you the same innovative content we’ve always been proud to offer in print, individual eBooks, and in digital collections.

inside, you’ll also find an announcement for our mP collections. on page 24, you can read more details about the applied, concise titles (average page count around 150) which will be aimed at advanced engineering students, and ideal for course readings and research in specialty areas less covered by introductory textbooks and research monographs. We’re looking for editors and authors for these collections, so let us hear from you with ideas!

and last, mP and asme Press have begun a new series, The Technologies for Sustainable Life Series (simon Pollard, Phd, series editor). see page 23 for more details.

enjoy reading our fourth quarter 2013 catalog, and contact us with any questions, orders, or ideas.

Thank You!

2 Momentum Press • 4th Quarter 2013 Catalog

Front List

DFA (DetRenDeD FlUCtUAtIOn AnAlysIs)An Empirical Study on Heartbeat By Toru Yazawa

This book described empirical results of biological use of an analytical technique, dfa (detrended fluctuation analysis). But this book did not describe what dfa is. instead, using dfa, fluctuation of heartbeats was investigated in this book. Because human hearts are inappropriate specimens for conducting physiological experiments, crustacean hearts were chosen at first as a model to conduct various experiments such as isolated-heart experiments. later, this book described human heart as well. first, we tried to describe how human hearts resemble with invertebrate hearts. (Those who do not need biology can skip biology sections.) Then, various results obtained from analysis both on model animals and humans were presented. By presenting the empirical results, the authors suggested how dfa is practically useful in the field of bio-medical technology.

from the asme/mP series: Biomedical & Nanomedical Technologies.

Publication Date: December 2013Print ISBN: 978-1-60650-612-7$89.95Ebook ISBN: 978-1-60650-613-4$81.00

Pages: 88

Biomedical and nanomedical Technologies

IMPeDIMetRIC BIOsensORs FOR MeDICAl APPlICAtIOnsCurrent Progress and Challenges By Jo Valerie Rushworth, Natalie A. Hirst, and Jack A. Goode

in this monograph, the authors discuss the current progress in the medical application of impedimetric biosensors, along with the key challenges in the field. first, a general overview of biosensor development, structure and function is presented, followed by a detailed discussion of impedimetric biosensors and the principles of electrochemical impedance spectroscopy. next, the current state-of-the art in terms of the science and technology underpinning impedance-based biosensors is reviewed in detail. The layer-by-layer construction of impedimetric sensors is described, including the design of electrodes, their nano-modification, transducer surface functionalization and the attachment of different bioreceptors. The current challenges of translating lab-based biosensor platforms into commercially-available devices that function with real patient samples at the Poc are presented.

from the asme/mP series: Biomedical & Nanomedical Technologies.

Publication Date: November 2013Print ISBN: 978-1-60650-636-3$89.95Ebook ISBN: 978-1-60650-637-0$81.00

Pages: 88



Front List

AUtOMAtIng MAnUFACtURIng OPeRAtIOns The Penultimate Approach William M. Hawkinsindustrial automation has gone from simple pre-programmed machine instructions to complex general manufacturing, rules-based automation procedures. unlike other books on industrial automation, this book focuses in on ‘manufacturing operations systems’ (moPs) in general. it describes their development, implementation and successful management. The book especially addresses the all-important human-machine interface: computer-based manufacturing procedures that are understandable to both computers and humans. The reader will benefit from:• An introduction to the theory of tubular flames• The ‘how to’ of maintaining stability of tubular flames through

continuous combustion• Examples of both small-scale and large-scale applications like

steel making, chemical processing, flexible-fuel-source heaters, efficient boilers, and other similar uses


Pages: 320

manufacTuring engineering

COnCIse enCyClOPeDIA OF COnstRUCtIOn teRMs AnD PhRAses Karl F. SchmidThis is the first up-to-date, comprehensive reference on building construction terms and phrases to have been published in recent years. The coverage will be wide ranging from familiar terms like ‘concrete’ to arcane terms like ‘elutriator.’ entries are explained in terms of their use in specific types of construction. common construction math formulas are also explained. The book will provide ample resources for further reference and study, including listings of relevant associations and societies, as well as governmental agencies involved with the construction industry.

Publication Date: October 2013Print ISBN: 978-1-60650-618-9$149.95Ebook ISBN: 978-1-60650-619-6$135.00

Pages: 700

civil engineering


Frontlist

ReAl tIMe COntROl OF the InDUstRIAl enteRPRIse Peter Martin and Walter Boyes over the last fifty years, almost none of the productivity gains in manufacturing have come from better chemistry or better design, or even better management and financial controls. rather, those gains have come from better automation and control of the processes: continuous, batch, hybrid , and discrete. The secret to making manufacturing sustainable is better control. so, why aren’t the theories that have led to enormous gains in productivity being used above the plant level? This book explains both why not and how better controls can be applied to the supply chain, and to enterprise financial management. This book provides engineering and technology managers the insight and tools for achieving a fully integrated automated manufacturing enterprise, from the technical and engineering side to the business management side. it is particularly helpful to readers seeking to bring the non-technical parts of a manufacturing operation—customer service, cost and financial management—in line with the already-automated production, inventory management, and plant management.


Pages: 220


sCAtteRIng OF ACOUstIC AnD eleCtROMAgnetIC WAves By sMAll IMPeDAnCe BODIes OF ARBItRARy shAPes Alexander G. Ramm

The behavior of acoustic or electromagnetic waves reflecting off, and scattering from, intercepted bodies of any size and kind can make determinations about the materials of those bodies and help in better understanding how to manipulate such materials for desired characteristics. This book offers analytical formulas which allow you to calculate acoustic and electromagnetic waves, scattered by one and many small bodies of an arbitrary shape under various boundary conditions. equations for the effective (self-consistent) field in media consisting of many small bodies are derived. These results and formulas are new and not available in the works of other authors. Publication Date: November 2013

Print ISBN: 978-1-60650-621-9$159.95Ebook ISBN: 978-1-60650-622-6$143.00

Pages: 256

maTerials science and engineering

Frontlist


tUBUlAR COMBUstIOn Advanced Black Belt Concepts Satoru Ishizuka, Derek Dunn-Rankin, and Robert W. PitzTubular combustors are cylindrical tubes where flame ignition and propagation occur in a spatially confined, highly controlled environment, in a nearly flat, elongated geometry. This allows for some unique advantages where extremely even heat dispersion is required over a large surface while still maintaining fuel efficiency. Tubular combustors also allow for easy flexibility in type of fuel source, allowing for quick changeover to meet various needs and changing fuel pricing. This new addition to the mP sustainable energy series will provide the most up-to-date research on tubular combustion—some of it only now coming out of private proprietary protection. highlights include:• An introduction to the theory of tubular flames• The ‘how to’ of maintaining stability of tubular flames through

continuous combustion• Examples of both small-scale and large-scale applications like

steel making, chemical processing, flexible-fuel-source heaters, efficient boilers, and other similar uses

Publication Date: October 2013Print ISBN: 978-1-60650-303-4$89.95Ebook ISBN: 978-1-60650-305-8$81.00

Pages: 192

mechanical engineering


Recently Published

gFP WhOle Cell MICROBIAl BIOsensORs Scale-up and scale-down effects on biopharmaceutical processesBy Frank Delvigne

Two strategies are usually considered for the optimization of microbial bioprocesses. The first one involves genetic or metabolic engineering of the target microbial strains in order to improve its production efficiency or its tolerance to adverse conditions. The second one is based on the chemical engineering improvement of the bioreactors and scaling-up rules. This work is more particularly dedicated to this second class of parameters. recent developments in bioreactor technologies follow the scaling-out principle, i.e. carrying out several cultures in parallel with controlled conditions for screening purposes. several mini-bioreactor concepts, i.e. bioreactor with working volume of 1 to 100 ml with controlling devices, have been developed following this principle.

from the asme/mP series: Biomedical & Nanomedical Technologies. see Page 16 for ordering information.

Publication Date: January 2013Print ISBN: 978-1-60650-427-7$89.95Ebook ISBN: 978-1-60650-417-8$81.00Pages: 52


PhOtODynAMIC theRAPy MeDIAteD By FUlleRenes AnD theIR DeRIvAtIves By Mike Hamblin

The fullerene molecule is a carbon-based nano-scale structure of 60 carbon atoms arranged in a 3-dimensional soccer ball- like sphere. it is highly stable, but it can be modified with functional groups for desired biological activity. This new monograph in the ASME-Momentum Press series on Biomedical & Nanomedical Technologies will explore the basic physics and chemistry of fullerenes, how the fullerene molecule can be chemically modified with bio-active moieties, and then how it can be applied in clinical use. examples of antimicrobial and anti-cancer uses will be discussed.




Recently Published


FACIlItIes MAnAgeMentManaging Maintenance for Buildings and FacilitiesBy Joel Levitt

facilities management is a broad-based discipline that calls into play architectural, construction, engineering and management skills, particularly for running and maintaining commercial, institutional, academic, and industrial buildings. This book will cover the essential role and responsibilities of the facilities manager, both as manager of existing building inventory as well as future planning and risk-based maintenance. newcomers to facilities management will find this an excellent introduction, while established professionals will be able to brush up on the latest technological and regulatory trends affecting how complex facilities should be successfully maintained by way of risk assessment. for the classroom, the book contains ample exercises, useful ready-to-use forms and resources for extended study and instruction.

Publication Date: February 2013Print ISBN: 978-1-60650-324-9$120.95Ebook ISBN: 978-1-60650-326-3$109.00Pages: 234

civil engineering

BIOCOMPAtIBle nAnOMAteRIAls FOR tARgeteD AnD COntROlleD DelIveRy OF BIOMACROMOleCUles By Sanju Dhawan and Deepak Kapoor

nanomaterials have gained immense recognition, particularly in biomacromolecular delivery, owing to their capability of diagnosis, controlled drug release or targeting at molecular, cellular and organ level. The present chapter endeavors to describe the role of nanomaterials in the development of various nanostructured, biomacromolecular delivery systems. The chapter presents a discussion on various physicochemical properties, preparation techniques and analytical tools for characterizing these systems. The mechanisms of cellular internalization of nanomaterial based targeted systems is also embarked upon. various challenges posed during the development, scale up and large-scale production is discussed. a brief overview pertaining to the regulatory requirements and commercialization of these systems is also included.


Publication Date: June 2013Print ISBN: 978-1-60650-600-4$89.95Ebook ISBN: 978-1-60650-602-8$81.00Pages: 56



Recently Published

the PAth tO MORe sUstAInABle eneRgy systeMsHow Do We Get There from Here? By Ben W. Ebenhack and Daniel M. Martinez

energy engineers, technology managers, and political leaders all need a solid, holistic understanding of where the world finds its energy—the limits of that energy—and what we will need to do in the future if we are to have a cleaner and environmentally sustainable world, all without sacrificing our modern technological-based civilization. This book will shed some much needed light on that conundrum. it

• Provides a broad overview of our current energy sources, their uses and limitations and political and economic constraints

• Clarifies the urgency behind the sweeping changes in the world’s energy needs and available supplies

• Offers a rational paradigm for how we can go about selecting the optimal mix of fossil, renewable and sustainable energy sources and how we can then aggressively move toward those more sustainable sources

Publication Date: June 2013Print ISBN: 978-1-60650-260-0$76.95Ebook ISBN: 978-1-60650-262-4$70.00Pages: 192

environmenTal science and engineering

BACnetThe Global Standard for Building Automation and Control Networks By H. Michael Newman

Bacnet is a set of data communication protocols, developed jointly by ashrae, ansi and iso, for how the automatic control systems in a building—from heating, to ventilation to lighting to fire control and alarm systems—can communicate with one another and, in turn, offer a centralized way for controlling all systems in a building. The Bacnet protocols are made use of in central control systems manufactured by companies like honeywell, siemens, and Johnson controls, among many others. This book will offer those readers the ‘inside wisdom’ from the person who actually helped to create this standard specification making it easier to understand the intent and use of each of the data sharing protocols, the controller requirements, and the opportunities for inter-operability between different proprietary controllers and systems.

Publication Date: August 2013Print ISBN: 978-1-60650-288-4$99.95Ebook ISBN: 978-1-60650-290-7$90.00

Pages: 358

civil engineering

Recently Published


UnDeRstAnDIng UltRAsOnIC level MeAsUReMent By Stephen Milligan, Henry Vandelinde, and Michael Cavanagh

storing, handling, and processing of bulk solid and liquid materials is fundamental to nearly every manufacturing and processing industry, from the food industry and agribusiness, to the plastics industry, to the mining and cement industries, to coal-fired electric utilities. This new book will offer a quick and useful guide to the use of ultrasound as a way to measure the levels of these materials in a wide variety of operational environments and situations. The book will explain the history of this technology, its proper set-up and operation, and a helpful selection of useful application examples. it will also offer good guidance on ultrasound equipment and vendors.



MAsteRIng leAn sIx sIgMA Advanced Black Belt Concepts Salman Taghizadegan a master Black Belt (mBB) in six sigma statistical quality control is awarded to those individuals who possess the highest level of expertise and knowledge of current industry practice. Becoming a master Black Belt involves a great deal more than just learning advanced statistical techniques. it also involves knowing how to use those tools to implement and manage an overall lean six sigma program. This book develops a dynamic program to meet the requirements of a mBB and provides the necessary skills for leading a company in a Quality improvement initiative. highlights of the book include: • an introduction to the requirements and knowledge needed for

a six-sigma master Black-Belt. • guidance on how to design a strategic Lean Six-Sigma

infrastructure successfully. • guidance on how to manage multiple on-going Lean Six-Sigma

Black-Belts Projects. • coverage of statistical analysis concepts and advanced

measurement methods and tools. • illustrative case studies.

Publication Date: July 2013Print ISBN: 978-1-60650-404-8$119.95Ebook ISBN: 978-1-60650-406-2$108.00

Pages: 618



Recently Published

COntROl systeM MIgRAtIOns A Practical Project Management HandbookBy Daniel Roessler

reliable and effective control systems are a critical component of safe and profitable operations across process industries. and many of our industrial facilities today continue to operate using legacy control systems from the past four decades that are at or near the end of their lifecycles. migration projects to modern control systems are complex, requiring detailed upfront planning, a methodical implementation strategy and astute project management. This comprehensive collection of best practices guides you to control system migration success.• A practical application guide to walk you through the entire

process • A thorough resource to aid the identification of common and

high-risk challenges• A concise primer of project management covering both the

technical aspects of projects and the intangible factors for success

Publication Date: September 2013Print ISBN: 978-1-60650-443-7$89.00Ebook ISBN: 978-1-60650-445-1$80.00Pages: 320


AUtOMAteD WeIghIng teChnOlOgy Process SolutionsBy Ralph Closs, Henry Vandelinde, and Matt Morrissey

Weighing items and bulk materials is one of the most essential aspects of any industrial enterprise, and automating those tasks is at the heart of any automated enterprise. This book will review the essential challenges in both static and dynamic weighing and then go on to explain how a suite of very popular, highly adopted controllers and sensors from siemens electronics can be used to make such operations as efficient as possible. useful applications for various types of industrial processes help to make vivid the benefits of this technology.

Publication Date: August 2013Print ISBN: 978-1-60650-633-2$78.95Ebook ISBN: 978-1-60650-634-9$62.00Pages: 150


Recently Published


CheMICAl sensORs: sIMUlAtIOn AnD MODelIng vOlUMe 4: Optical Sensors Edited by Ghenadii Korotcenkov

Volume 4: Optical Sensors covers various approaches used for modeling and simulation of different types optical sensors such as fiber optic, surface Plasmon resonance, fabry-Perot interferometer, transmittance in the mid-infrared region, luminescence based devices, etc. approaches used for design and optimization of optical systems aimed for remote gas sensing and gas analysis chamber for ndir spectral range are discussed as well. The description of multiscale atomistic simulation of hierarchical nanostructured materials for optical chemical sensing is also included in present volume. This 5 volume reference work covering simulation and modeling will serve as the perfect complement to momentum Press’s 6 volume reference works Chemical Sensors: Fundamentals of Sensing Materials and Chemical Sensors: Comprehensive Sensor Technologies, which present detailed information related to materials, technologies, construction and application of various devices for chemical sensing.



x-RAy FlUOResCenCe sPeCtROMetRy AnD RelAteD teChnIQUes: An IntroductionBy Eva Margui and Rene Van Grieken

X-ray fluorescence spectrometry (Xrf) is a well-established analytical technique for qualitative and quantitative elemental analysis of a wide variety of routine quality control and research samples. among its many desirable features, it delivers true multi-element character analysis, acceptable speed and economy, easy of automation, and the capacity to analyze solid samples. This remarkable contribution to this field provides a comprehensive and up-to-date account of basic principles, recent developments, instrumentation, sample preparation procedures, and applications of Xrf analysis. if you are a professional in materials science, analytic chemistry, or physics, you will benefit from not only the review of basics, but also the newly developed technologies with Xrf. Those recent technological advances, including the design of low-power micro-focus tubes and novel X-ray optics and detectors, have made it possible to extend Xrf to the analysis of low Z elements and to obtain 2d or 3d information on a micrometer-scale.

Publication Date: February 2013Print ISBN: 978-1-60650-391-1$208.95Ebook ISBN: 978-1-60650-393-5$189.00Pages: 142



Recently Published

PeM FUel CellsThermal and Water Management Fundamentals Yun Wang, Ken S. Chen, and Sun Chan Cho

Polymer electrolyte membrane (Pem) fuel cells hold great promise as a potential alternative to conventional fossil-fuel-powered energy sources. however, they produce waste heat, and the water used in their system must be carefully controlled and monitored. This book offers the most up-to-date research on advanced methods for managing both waste heat and monitoring water flows and water concentration in Pem fuel cells. The most workable solutions to these problems and the challenges that still lie ahead are emphasized. The reader will find:

• A review of multi-component mass transport phenomena, particularly as they apply to gas flow and hydrogen and air flow

• Coverage of multi-phase flow and heat transfer characteristics of Pem fuel cells

• Unique coverage of solid water phase behavior of PEM fuel cells and subfreezing temperature operation.

Publication Date: April 2013Print ISBN: 978-1-60650-245-7$76.95Ebook ISBN: 978-1-60650-247-1$69.00

Pages: 386


ClAssICAl AnD MODeRn engIneeRIng MethODs In FlUID FlOW AnD heAt tRAnsFeR An Introduction for Engineers and Students By Abram Dorfman

This book presents contemporary theoretical methods in fluid flow and heat transfer, emphasizing principles of investigation and modeling of natural phenomena and engineering processes. more than a hundred examples show the applicability of the methods in such areas as nuclear reactors, aerospace, crystal growth, turbine blades, electronics packaging, optical fiber coating, wire casting, blood flow, urinary problems, and food processing. intended for practicing engineers and students, the book balances strong formulation of problems with detailed explanations of definitions and terminology. author comments give attention to special terms like singularity, order of magnitude, flow stability, and nonisothermicity characteristics.

Publication Date: March 2013Print ISBN: 978-1-60650-269-3$120.95Ebook ISBN: 978-1-60650-271-6$109.00Pages: 385


Recently Published


CheMICAl sensORs: sIMUlAtIOn AnD MODelIng vOlUMe 5: Electrochemical Sensors Edited by Ghenadii Korotcenkov

momentum Press is proud to bring to you Chemical Sensors: Simulation and Modeling Volume 5: Electrochemical Sensors, edited by ghenadii Korotcenkov. This is the fifth of a five-volume comprehensive reference work that provides computer simulation and modeling techniques in various fields of chemical sensing. The important applications for chemical sensing include such topics as bulk and surface diffusion, adsorption, surface reactions, sintering, conductivity, mass transport, and interphase interactions. in this fifth volume, you will find background and guidance on:• Modeling and simulation of electrochemical processes in both

solid and liquid electrolytes, including charge separation and transport (gas diffusion, ion diffusion) in membranes, proton-electron transfers, electrode reactions, etc.

• Various models used to describe electrochemical sensors such as potentiometric, amperometric, conductometric, impedimetric, and ionsensitive feT sensors

Publication Date: July 2013Print ISBN: 978-1-60650-596-0$199.95Ebook ISBN: 978-1-60650-598-4$180.00

Pages: 408



Published in 2012

ChItOsAn AnD Its DeRIvAtIves As PROMIsIng DRUg DelIveRy CARRIeRsBy M. PrabaharanPublication Date: October 2012Print ISBN: 978-1-60650-423-9 $89.95Ebook ISBN: 978-1-60650-413-0 $81.00Pages: 80Biomedical engineering

MOBIle WeARABle nAnO-BIO heAlth MOnItORIng systeMs WIth sMARtPhOnes As BAse stAtIOnsBy Vijay K. Varadan and Linfeng ChenPublication Date: October 2012Print ISBN: 978-1-60650-424-6 $89.95Ebook ISBN: 978-1-60650-414-7 $81.00Pages: 80Biomedical engineering

nAnOPARtICles AnD BRAIn tUMOR tReAtMentBy Gerardo Caruso, Maria Caffo, and Giuseppe RaudinoPublication Date: September 2012Print ISBN: 978-1-60650-422-2 $89.95Ebook ISBN: 978-1-60650-408-6 $81.00Pages: 80Biomedical engineering

nAnOteChnOlOgy In MeDICIneEmerging ApplicationsBy Eugene KoprowskiPublication Date: February 2012Print ISBN: 978-1-60650-248-8 $84.95Ebook ISBN: 978-1-60650-250-1 $76.00Pages: 172Biomedical engineering

PhOtODynAMIC theRAPy MeDIAteD By FUlleRenes AnD theIR DeRIvAtIvesBy Mike HamblinPublication Date: October 2012Print ISBN: 978-1-60650-426-0 $89.95Ebook ISBN: 978-1-60650-416-1 $81.00Pages: 60

Biomedical engineering

sIlICA nAnOPARtICles As DRUg DelIveRy systeM FOR IMMUnOMODUlAtOR gMDPBy E.V. Parfenyuk, N.A. Alyoshina, and Yu S.AntsiferovaPublication Date: October 2012Print ISBN: 978-1-60650-421-5 $89.95Ebook ISBN: 978-1-60650-395-9 $81.00Pages: 60Biomedical engineering

CAtChIng the PROCess FIelDBUsAn Introduction to PROFIBUS for Process AutomationBy James Powell and Henry VandelindePublication Date: September 2012 Print ISBN: 978-1-60650-396-6 $76.95Ebook ISBN: 978-1-60650-398-0 $70.00Pages: 172manufacTuring engineering

gOIng the DIstAnCeSolids Level Measurement with RadarBy Tim Little and Henry VandelindePublication Date: September 2012Print ISBN: 978-1-60650-400-0 $76.95Ebook ISBN: 978-1-60650-402-4 $70.00Pages: 134manufacTuring engineering

Published in 2012


PlAnt ItIntegrating Information Technology into Automated ManufacturingBy Dennis L. BrandlPublication Date: December 2012Print ISBN: 978-1-60650-431-4 $109.99Ebook ISBN: 978-1-60650-433-8 $99.00Pages: 140manufacTuring engineering

QUAlIty ReCOgnItIOn & PReDICtIOnSmarter Pattern Technology with the Mahalanobis-Taguchi System By Shoichi Teshima, Yoshiko Hasegawa, and Kazuo TatebayashiPublication Date: June 2012Print ISBN: 978-1-60650-342-3 $153.95Ebook ISBN: 978-1-60650-344-7 $139.00Pages: 230manufacTuring engineering

sOlIDs level MeAsUReMent AnD DeteCtIOn hAnDBOOkEmerging ApplicationsBy Joe LewisPublication Date: February 2012Print ISBN: 978-1-60650-254-9 $108.95Ebook ISBN: 978-1-60650-256-3 $98.00Pages: 208manufacTuring engineering

textIle PROCessesQuality Control and Design of ExperimentsBy Georgi Damyanov and Diana Germanova-KrastevaPublication Date: November 2012Print ISBN: 978-1-60650-387-4 $219.95Ebook ISBN: 978-1-60650-389-8 $198.00Pages: 240manufacTuring engineering

vARIABle sPeeD DRIvesPrinciples and Applications for Energy Cost Savings, Fourth EditionBy David W. SpitzerPublication Date: September 2012Print ISBN: 978-1-60650-363-8 $131.95Ebook ISBN: 978-1-60650-365-2 $119.00Pages: 220manufacTuring engineering

An IntRODUCtIOn tO tRAnsPORt PhenOMenA In MAteRIAls engIneeRIng, Second EditionBy David GaskellPublication Date: August 2012Print ISBN: 978-1-60650-355-3 $219.95Ebook ISBN: 978-1-60650-357-7 $198.00Pages: 664maTerials science and engineering

ChARACteRIzAtIOn OF tRIBOlOgICAl MAteRIAlsSecond EditionPublication Date: December 2012By William A. Glaeser, C. Richard Brundle, and Charles A. Evans, Jr.Print ISBN: 978-1-60650-257-0 $109.95Ebook ISBN: 978-1-60650-259-4 $99.00Pages: 180


MODelIng sOlID-stAte PReCIPItAtIOnBy Ernst KozeschnikPublication Date: December 2012 Print ISBN: 978-1-60650-062-0 $219.95Ebook ISBN: 978-1-60650-064-4 $198.00Pages: 464maTerials science and engineering


Published in 2012

POlyMeR testIngNew Instrumental MethodsBy Muralisrinivasan SubramanianPublication Date: June 2012 Print ISBN: 978-1-60650-242-6 $131.95Ebook ISBN: 978-1-60650-244-0 $119.00Pages: 220maTerials science and engineering

sOlID-stAte nMRBasic Principles & PracticeBy David C. Apperley, Robin K. Harris, and Paul HodgkinsonPublication Date: June 2012 Print ISBN: 978-1-60650-350-8 $120.95Ebook ISBN: 978-1-60650-352-2 $109.00Pages: 280maTerials science and engineering

AeROsPACe sensORsBy Alexander NebylovPublication Date: December 2012 Print ISBN: 978-1-60650-059-0 $219.95Ebook ISBN: 978-1-60650-061-3 $198.00Pages: 348mechanical engineering

CheMICAl sensORs: sIMUlAtIOn AnD MODelIng—vOlUMe 1: Microstructural Characterization and Modeling of Metal Oxides By Ghenadii KorotcenkovPublication Date: June 2012Print ISBN: 978-1-60650-309-6 $230.95Ebook ISBN: 978-1-60650-311-9 $219.00Pages: 440mechanical engineering

CheMICAl sensORs: sIMUlAtIOn AnD MODelIng—vOlUMe 2: Conductometric-Type SensorsBy Ghendaii KorotcenkovPublication Date: June 2012Print ISBN: 978-1-60650-312-6 $230.95Ebook ISBN: 978-1-60650-314-0 $219.00Pages: 300mechanical engineering

CheMICAl sensORs: sIMUlAtIOn AnD MODelIng—vOlUMe 3: Solid-State DevicesBy Ghenadii KorotcenkovPublication Date: December 2012Print ISBN: 978-1-60650-315-7 $230.95Ebook ISBN: 978-1-60650-317-1 $219.00Pages: 517mechanical engineering

the essentIAls OF FInIte eleMent MODelIng AnD ADAPtIve ReFIneMentFor Beginning Analysts to Advanced Researchers in Solid Mechanics By John O. DowPublication Date: June 2012Print ISBN: 978-1-60650-332-4 $109.95Ebook ISBN: 978-1-60650-334-8 $99.00Pages: 271mechanical engineering

Backlist


COnstRUCtIOn CReW sUPeRvIsIOn50 Take Charge Leadership Techniques & Light Construction Glossary By Karl F. SchmidPublication Date: November 2009Print ISBN: 978-1-60650-077-4 $39.95Ebook ISBN: 978-1-60650-078-1 $37.00Pages: 228civil engineering

COnstRUCtIOn estIMAtIng:A Step-by-Step Guide to a Successful Estimate By Karl F. SchmidPublication Date: September 2011Print ISBN: 978-1-60650-292-1 $48.95Ebook ISBN: 978-1-60650-293-8 $44.00Pages: 305civil engineering

PROFessIOnAl exPRessIOnTo Organize, Write, and Manage for Technical CommunicationBy P.E. Morris, M.D.Publication Date: July 2009Print ISBN: 978-1-60650-071-2 $30.95Ebook ISBN: 978-1-60650-072-9 $28.00Pages: 204engineering general reference

sOCIAl MeDIA FOR engIneeRs AnD sCIentIstsBy Jon DiPietroPublication Date: November 2011Print ISBN: 978-1-60650-251-8 $48.95Ebook ISBN: 978-1-60650-253-2 $44.00Pages: 228engineering general reference

the engIneeRIng lAngUAge A Consolidation of the Words and Their Definitions Publication Date: January 2010By Ronald HanifanPrint ISBN: 978-1-60650-206-8 $36.95Ebook ISBN: 978-1-60650-208-2 $33.00Pages: 280engineering general reference

ClIMAte ChAnge:The Fork at the End of NowBy Micha Tomkiewicz, Ph.DPublication Date: June 2011Print ISBN: 978-1-60650-272-3 $96.95Ebook ISBN: 978-1-60650-274-7 $87.00Pages: 320

environmenTal science and engineering

ADvAnCeD RegUlAtORy COntROlApplications and TechniquesBy David W. SpitzerPublication Date: October 2009Print ISBN: 978-1-60650-124-5 $60.95Ebook ISBN: 978-1-60650-126-9 $54.00Pages: 158manufacTuring engineering

AlARM MAnAgeMent FOR PROCess COntROlA Best-Practice Guide for Design, Implementation, and Use of Industrial Alarm SystemsBy Douglas H. RothenbergPublication Date: September 2009Print ISBN: 978-1-60650-003-3 $175.95Ebook ISBN: 978-1-60650-005-7 $159.00Pages: 610manufacTuring engineering


Backlist

InDUstRIAl ResOURCe UtIlIzAtIOn AnD PRODUCtIvItyUnderstanding the LinkagesBy Anil Mital, Ph.D. and Arun Pennathur, Ph.D.Publication Date: August 2010Print ISBN: 978-1-60650-130-6 $84.95Ebook ISBN: 978-1-60650-132-0 $76.00Pages: 262manufacTuring engineering

PROCess COntROl CAse hIstORIesAn Insightful and Humorous Perspective from the Control Room By Gregory K. McMillanPublication Date: March 2010Print ISBN: 978-1-60650-176-4 $36.95Ebook ISBN: 978-1-60650-177-1 $33.00Pages: 128manufacTuring engineering

PROteCtIng InDUstRIAl COntROl systeMs FROM eleCtROnIC thReAtsBy Joseph WeissPublication Date: June 2010Print ISBN: 978-1-60650-197-9 $108.95Ebook ISBN: 978-1-60650-199-3 $98.00Pages: 338manufacTuring engineering

RAW AnD FInIsheD MAteRIAls:A Concise Guide to Properties and ApplicationsBy Brian Dereu Publication Date: November 2011Print ISBN: 978-1-60650-073-6 $84.95Ebook ISBN: 978-1-60650-075-0 $76.00Pages: 285manufacTuring engineering

ROBUst COntROl systeM netWORks:How to Achieve Reliable Control After Stuxnet, By Ralph LangnerPublication Date: September 2011Print ISBN: 978-1-60650-300-3 $96.95Ebook ISBN: 978-1-60650-302-7 $87.00Pages: 206manufacTuring engineering

the WBF BOOk seRIes: ISA-95 Implementation Experiences, By WBFPublication Date: February 2011Print ISBN: 978-1-60650-215-0 $96.95Ebook ISBN: 978-1-60650-217-4 $87.00Pages: 278manufacTuring engineering

the WBF BOOk seRIes: ISA-88 and ISA-95 in the Life Science IndustriesBy WBFPublication Date: March 2011Print ISBN: 978-1-60650-203-7 $96.95Ebook ISBN: 978-1-60650-205-1 $87.00Pages: 220manufacTuring engineering

the WBF BOOk seRIes: ISA 88 Implementation Experiences, By The WBFPublication Date: December 2010Print ISBN: 978-1-60650-212-9 $96.95Ebook ISBN: 978-1-60650-214-3 $87.00Pages: 292manufacTuring engineering

the WBF BOOk seRIes: Applying ISA 88 In Discrete and Continuous ManufacturingBy The WBFPublication Date: December 2010Print ISBN: 978-1-60650-200-6 $96.95Ebook ISBN: 978-1-60650-202-0 $87.00Pages: 227manufacTuring engineering

Backlist


BOnDs AnD BAnDs In seMICOnDUCtORs, seCOnD eDItIOnBy J. C. Phillips and Gerald Lucovsky Publication Date: November 2009Print ISBN: 978-1-60650-133-7 $120.95Ebook ISBN: 978-1-60650-135-1 $109.00Pages: 352maTerials science and engineering

ChARACteRIzAtIOn In COMPOUnD seMICOnDUCtOR PROCessIngBy Gary E. McGuire, Yale E. Strausser, and C. Richard BrundlePublication Date: January 2010Print ISBN: 978-1-60650-041-5 $108.95Ebook ISBN: 978-1-60650-043-0 $98.00Pages: 212maTerials science and engineering

ChARACteRIzAtIOn In sIlICOn PROCessIngBy Yale E.Strausser, C. Richard Brundle, and Charles A. Evans, Jr. Publication Date: January 2010Print ISBN: 978-1-60650-109-2 $108.95Ebook ISBN: 978-1-60650-111-5 $98.00Pages: 240maTerials science and engineering

ChARACteRIzAtIOn OF CAtAlytIC MAteRIAlsBy Israel E. Wachs, C. Richard Brundle, and Charles A. Evans, Jr. Publication Date: March 2010Print ISBN: 978-1-60650-184-9 $108.95Ebook ISBN: 978-1-60650-186-3 $98.00Pages: 202maTerials science and engineering

ChARACteRIzAtIOn OF CeRAMICsBy Ronald E. Loehman, C. Richard Brundle, and Charles A. Evans, Jr.Publication Date: March 2010Print ISBN: 978-1-60650-194-8 $108.95Ebook ISBN: 978-1-60650-196-2 $98.00Pages: 295maTerials science and engineering

ChARACteRIzAtIOn OF COMPOsIte MAteRIAlsBy Hatsuo Ishida, C. Richard Brundle, and Charles A. Evans, Jr.Publication Date: March 2010Print ISBN: 978-1-60650-191-7 $108.95Ebook ISBN: 978-1-60650-193-1 $98.00Pages: 277maTerials science and engineering

ChARACteRIzAtIOn OF IntegRAteD CIRCUIt PACkAgIng MAteRIAlsBy Thomas M. Moore, Robert G. McKenna, and C. Richard BrundlePublication Date: March 2010Print ISBN: 978-1-60650-187-0 $108.95Ebook ISBN: 978-1-60650-189-4 $98.00Pages: 274maTerials science and engineering

ChARACteRIzAtIOn OF MetAls AnD AllOys By Paul H. Holloway, P. N. Vaidyanathan, and C. Richard BrundlePublication Date: December 2009Print ISBN: 978-1-60650-047-7 $108.95Ebook ISBN: 978-1-60650-049-1 $98.00Pages: 310maTerials science and engineering


Backlist

ChARACteRIzAtIOn OF OPtICAl MAteRIAlsBy Gregory J. Exarhos, C. Richard Brundle, and Charles A. Evans, Jr.Publication Date: March 2010Print ISBN: 978-1-60650-050-7 $108.95Ebook ISBN: 978-1-60650-052-1 $98.00Pages: 212


ChARACteRIzAtIOn OF ORgAnIC thIn FIlMsBy Abraham Ulman, C. Richard Brundle, and Charles A. Evans, Jr.Publication Date: January 2010 Print ISBN: 978-1-60650-044-6 $108.95Ebook ISBN: 978-1-60650-046-0 $98.00Pages: 276


ChARACteRIzAtIOn OF POlyMeRsBy Ned J. Chou, Stephen P. Kowalczyk, and Ravi SarafPublication Date: March 2010Print ISBN: 978-1-60650-053-8 $108.95Ebook ISBN: 978-1-60650-055-2 $98.00Pages: 320maTerials science and engineering

PlAstICs teChnOlOgy hAnDBOOk: vOlUMe 1Introduction, Properties, Fabrication, ProcessesBy Don Rosato, Marlene G. Rosato, and Nick R. SchottPublication Date: October 2010Print ISBN: 978-1-60650-079-8 $423.95Ebook ISBN: 978-1-60650-081-1 $382.00Pages: 1,456maTerials science and engineering

PlAstICs teChnOlOgy hAnDBOOk: vOlUMe 2Manufacturing, Composites, Tooling, AuxiliariesEdited by: Donald V. Rosato, Marlene G. Rosato, Nick R. SchottPublication Date: October 2011Print ISBN: 978-1-60650-082-8 $423.95Ebook ISBN: 978-1-60650-084-2 $382.00Pages: 966maTerials science and engineering

DIFFUse sCAtteRIng AnD the FUnDAMentAl PROPeRtIes OF MAteRIAlsBy Rozaliya Barabash, Gene E. Ice, and Patrice E.A. TurchiPublication Date: April 2009Print ISBN: 978-1-60650-000-2 $181.95Ebook ISBN: 978-1-60650-002-6 $163.00Pages: 444maTerials science and engineering

ACOUstIC hIgh-FReQUenCy DIFFRACtIOn theORyBy Frédéric MolinetPublication Date: May 2011Print ISBN: 978-1-60650-100-9 $146.95Ebook ISBN: 978-1-60650-102-3 $132.00Pages: 474mechanical engineering

AUtOMOtIve sensORs By John Turner and Joe Watson

Publication Date: March 2009Print ISBN: 978-1-60650-009-5 $131.95Ebook ISBN: 978-1-60650-011-8 $119.00Pages: 278


Backlist


BIO-InsPIReD engIneeRIng By Christopher H. M. Jenkins

Publication Date: December 2011Print ISBN: 978-1-60650-223-5 $133.95Ebook ISBN: 978-1-60650-225-9 $120.00Pages: 156mechanical engineering

BIOMeDICAl sensORsBy Deric P. Jones and Joe Watson

Publication Date: November 2010Print ISBN: 978-1-60650-056-9 $153.95Ebook ISBN: 978-1-60650-058-3 $143.00Pages: 320mechanical engineering

CentRIFUgAl AnD AxIAl COMPRessOR COntROlBy Gregory K. McMillan

Publication Date: March 2010Print ISBN: 978-1-60650-173-3 $48.95Ebook ISBN: 978-1-60650-174-0 $44.00Pages: 140mechanical engineering

CheMICAl sensORs: FUnDAMentAls OF sensIng MAteRIAls — vOlUMe 1:General ApproachesBy Ghenadii Korotcenkov

Publication Date: September 2010Print ISBN: 978-1-60650-103-0 $241.95Ebook ISBN: 978-1-60650-105-4 $218.00Pages: 528mechanical engineering

ChEMICaL SEnSoRS : FundaMEnTaLS oF SEnSIng MaTERIaLS — vOlUMe 2: Nanostructured MaterialsBy Ghenadii KorotcenkovPublication Date: November 2011Print ISBN: 978-1-60650-106-1 $241.95Ebook ISBN: 978-1-60650-108-5 $218.00Pages: 450mechanical engineering

CheMICAl sensORs: FUnDAMentAls OF sensIng MAteRIAls — vOlUMe 3: Polymers and Other MaterialsEdited by Ghenadii KorotcenkovPublication Date: January 2011Print ISBN: 978-1-60650-230-3 $241.95Ebook ISBN: 978-1-60650-232-7 $218.00Pages: 380mechanical engineering

CheMICAl sensORs: COMPRehensIve sensOR teChnOlOgIes — vOlUMe 4: Solid State DevicesEdited by Ghenadii KorotcenkovPublication Date: May 2011Print ISBN: 978-1-60650-233-4 $241.95Ebook ISBN: 978-1-60650-235-8 $218.00Pages: 380mechanical engineering

CheMICAl sensORs: COMPRehensIve sensOR teChnOlOgIes — vOlUMe 5:Electrochemical and Optical SensorsEdited by Ghenadii KorotcenkovPublication Date: July 2011Print ISBN: 978-1-60650-236-5 $241.95Ebook ISBN: 978-1-60650-238-9 $218.00Pages: 370



Backlist

CheMICAl sensORs: COMPRehensIve sensOR teChnOlOgIes — vOlUMe 6:Chemical Sensors ApplicationsEdited by Ghenadii KorotcenkovPublication Date: November 2011Print ISBN: 978-1-60650-239-6 $241.95Ebook ISBN: 978-1-60650-241-9 $218.00Pages: 382mechanical engineering

ReDUCe yOUR engIneeRIng DRAWIng eRRORsPreventing the Most Common MistakesBy Ronald HanifanPublication Date: May 2010Print ISBN: 978-1-60650-210-5 $43.95Ebook ISBN: 978-1-60650-211-2 $40.00Pages: 100mechanical engineering

vIRtUAl engIneeRIngBy Joe CecilPublication Date: March 2010Print ISBN: 978-1-60650-097-2 $84.95Ebook ISBN: 978-1-60650-099-6 $76.00Pages: 158



a nEw SERIES FRoM MoMEnTuM PRESS and aSME PRESS!

The Technologies for Sustainable Life SeriesSimon Pollard, PhD, Series Editor

Nancy Cromar, PhD and Derek Dunn-Rankin, PhD, Associate Editors

This new concise monograph series (comprised of small contributions of 50-100 pages each) provides perspectives and applications of engineering technologies to a sustainable, low carbon economy. Written by leading experts in environmental engineering, pollution control and environmental policy, the series is intended to furnish the 21st century engineer with a practical and well-rounded introduction concern-ing the new sustainability agenda—one focused on energy resource efficiency, linked infrastructures and integrated policy design. each concise monograph offers a definitive analysis of its subject, with an applied focus that promotes engineering relevance and the contribution of technology to the sustainability agenda.

following an introduction to the key issues and the tenets of systems thinking, the series adopts a ‘resource cycle’ logic; progressing through a discussion of ecosystems and natural resources, materials extraction and flow through economies and then sustainable manufacturing and energy utilization. These themes are then linked to the cross-cutting aspects of pollution control and, finally, organizational governance and policy development. forthcoming topical groups within the series will include: Ecosystems and natural resources; Technologies for a sustainable life; Sustainable design, manufacturing and consumption; Energy and resource management; Environment, pollution and human health; and Governance, policy, citizens and the firm.

To submit a proposal for consideration and further information, contact the commissioning editor, dr. nigel hollingworth at: [email protected]

and Continuing To grow from aSME and MP…The Biomedical & nanomedical Technologies Series

Ahmed Al-Jumaily and Chris Jenkins, Series Editors

This series continues to add new books which provide a mixture of both theoretical and practical content that will appeal to engineers in both academia and industry.

for both series, asme Press will sell the print editions of these titles in north and south america. momentum Press will sell the electronic version in these regions as well as worldwide, and the print editions throughout the rest of the world.

authors from the wide range of science and engineering—from academia, research institutions and industry—who are involved in conception, design, development, analysis and operation of biomedical and biotechnological systems, materials and applications are invited to contribute.

To submit a proposal for consideration and further information, please contact commission editor dr. nigel hollingworth at [email protected].


announcing a new Publishing ProgramThE MP CoLLECTIonS

momentum Press is proud to announce a new publishing program — The mP collections. These applied, concise titles (with an average page count of 150) will be on various engineering topics, and aimed at advanced engineering students. content in these collections will be ideal for course readings and research in specialty areas less covered by introductory textbooks and research monographs.

We are actively seeking editors to head up these collections of titles, as well as authors to write individual books. collection editors will work closely with our editorial staff to select topics and drive the direction of the content within each subject area. once established, the collections will be marketed to faculty for course adoption, but predominantly to university libraries, where mP offers unrestricted, and perpetual access to digital content through university libraries, rendering our content easily accessible to all.

if you have an interest (or have friends or colleagues in engineering that might want to participate in this publishing program), please let us know.

Shoshanna goldberg ([email protected], 781-710-3097):

electrical engineeringcomputer science & engineeringcivil & environmental engineeringindustrial engineering

Joel Stein ([email protected], 732-828-0616):

mechanical engineeringmaterials science & engineeringchemical engineering



additional Information

REquEST a dESk CoPy FoR TExTBook adoPTIon

Please visit our website, www.momentumpress.net, to request a desk copy.

LIBRaRy [email protected]

(For more Information, see the back of this catalog)

USA & CANADAAIDConline | www.momentumpress.netPhone | 800.689.2432email | [email protected]

EUrOpE, MiDDlE EASt & AfriCAMcGraw-Hill Professionalonline | www.mcgraw-hill.co.ukemail | [email protected] | +44 (0) 1628 502700fax | +44 (0) 1628 635895

ASiAMcGraw-Hill Education60 Tuas Basin link, singapore 638775online | www.mheducation.asiaemail | [email protected] | (65) 6863 1580fax | (65) 6862 3354

lAtiN AMEriCACranbury International LLConline | www.cranburyinternational.comPhone | 802.223.6565email | [email protected] | ethan atkin

AUStrAliA & NEw ZEAlANDMcGraw-Hill Educationonline | www.mcgraw-hill.com.auemail | [email protected] | 61 2 9900 1800 fax | 61 2 9900 1980

iNDiA & SOUth ASiATata McGraw-Hill Education Pvt. Ltd.Phone | +91-120-438 3400 fax | +91-120-438 3401-403email | [email protected] | ms. rekha dhyani

how To PLaCE an oRdER

Jfm-2013isBn 978-1-60650-190-0

EBookS FoR ThE EngInEERIng LIBRaRyCreate your own Customized Content Bundle — the more books you buy, the higher your discount!ThE ConTEnT• Manufacturing Engineering• Mechanical & Chemical Engineering• Materials Science & Engineering• Civil & Environmental Engineering• General Reference

ThE TERMS• Perpetual access for a one-time fee• No subscriptions or access fees• Unlimited concurrent usage• Downloadable PDFs• Free MARC records

To learn more, visit:http://www.momentumpress.net/library

For more information or to set up a free trial, contact:[email protected]


What the experts are saying about robust Control System Networks: how to Achieve reliable Control After Stuxnet (ralph langer):

“...the first great, 5-star ICS security book.“ Dale Peterson, Digital Bond

“...brief, concise, well-written, full of compelling anecdotes, and groundbreaking.” Richard Bejtlich, taosecurity

momentum press 2013 catalog

Documents