monday, october 16, 2017 time 11:00-12:40 · pdf filemonday, october 16, 2017 time 11:00-12:40...
TRANSCRIPT
1
Session-1 (Lecture Room No. 1) Monday, October 16, 2017 Time 11:00-12:40
Chairperson: Muhammad Mujahid & Yuan Deng
11:00 17-180 KN Low Temperature Processed Ferroic Oxides on the Way to Fully Integrated Flexible Electronics
Paula M. Vilarinho, Monika Tomczyk, Inigo Bretos, Ricardo Jiménez, M. Lourdes Calzada, Portugal
11:40 17-286 KN Defect Assisted Nanoscale Precipitation Mechanism in TiNiPd Based High Temperature Shape Memory Alloys and their Potential Use in Aerospace and Engineering Applications
Muhammad Imran Khan, Pakistan
12:20 17-351 Evaluation of Titanium Nitride-Modified Bondcoat System Used in Thermal Barrier Coating in Corrosive Salts Environment at High Temperature
Imran Nazir Qureshi, Muhammad Shahid, A. Nusair Khan, Pakistan
12:40 – 14:00 Lunch & Prayer Break
Session-2 (Lecture Room No. 1) Monday, October 16, 2017 Time 14:00-15:40
Chairperson: Shahzad Alam & Seung Soo Hong
14:00 17-323 KN A/B Nonstoichiometry and its Effect on Electromechanical Properties of Lead-Free Perovskite Ceramics
Myong Ho Kim, Ali Hussain, South Korea
2
14:40 17-324 KN Development of a New Environment-Friendly Lead-Free Piezoelectric System of BiFeO3-BaTiO3 Ceramics and Thin Films
Tae Kwon Song, Myong Hwan Lee, Da Jong Kim, Jin So Park, Myong Ho Kim, Wong Jeong Kim, South Korea
15:20 17-342 Synthesis and Electromechanical Properties of BiFeO3-BaTiO3-Bi0.5(Zn0.5Ti0.5)O3 Ceramics
Ali Hussain, Gyeong Hyun Ryu, Tae-Kwon Song, Won Jeong Kim, Ibrahim Qazi, Myong Ho Kim, Pakistan
15:40 – 16:00 Tea Break
Session-3 (Lecture Room No. 2) Monday, October 16, 2017 Time 14:00-15:40
Chairperson: Muhammad Shahid & Huseyin Cimenoglu
14:00 17-83 In-Vitro Bioactivity and Electrochemical Behavior of Hydroxyapatite Coated TiNi Shape Memory Alloy for Biomedical Applications
Tahir Sattar, Fazal Ahmad Khalid, Pakistan
14:20 17-329 New Strategies to Obtain Highly Protective PEO Coatings Using Combine Organic and Inorganic Additives Based Solution
Zeeshan Ur Rehman, Min Soo Kim, Bon Heun Koo, South Korea
14:40 17-10 Exploration of Thermal Conductivity of Complex Material Using Novel Evan-Gillan Simulation Technique
Aamir Shahzad, S. I. Haider, Maogang He, Tariq Munir, Pakistan
15:00 17-105 Nickel Coated Carbon Nanomaterial for the Removal of Heavy and Toxic Metals (Cd, Cu ) from Water and Wastewater
Tayyaba Asim, Riaz Ahmed, Muhammad Shahid Ansari, Pakistan
3
15:20 17-213 Third Generation Photovoltaics; the Future of Solar Energy Syed Zaheer Abbas, Muhammad Irfan, Shahzad Alam, M. Riaz, Pakistan
15:40 – 16:00 Tea Break
Session-4 (Lecture Room No. 3) Monday, October 16, 2017 Time 14:00-15:40
Chairperson: Javed A. Bhatti & Maria Elizabeta Costa
14:00 17-258 KN New Oxynitride Glasses and Thin Films Sharafat Ali, Sweden
14:40 17-80 KN Removal of Heavy Metals (Lead, Cadmium and Iron) from Low-Grade Nanoscale Zinc Oxide Using Ammonium Carbonate Solution as a Leaching Agent
Ali Dad Chandio, Muhammad Sohail, Syed Tanveer Iqbal, Zeeshan Abbas, Rao Shakeel Ahmed, Shahid Bhutto, Syed Junaid Mehmood, Muhammad Yasir Khan, Pakistan
15:20 17-299 Ni-Cr Alloy for Dental Prostheses with Melting Point in Range 1100-1200 ºC
Ali Haider, Omar Farooq Azam, Saleem Akhtar, Pakistan
15:40 – 16:00 Tea Break
Session-5 Monday, October 16, 2017 Time 16:00-17:15
Exhibition
4
Session-6 (Lecture Room No. 1)
Tuesday, October 17, 2017 Time 09:00-10:40 Chairperson: Sher Bahadar Khan & Myong Ho Kim
09:00 17-135 KN The Design and Fabrication of Thermoelectric Materials and Devices Based on the Oriented Nanostructure
Yuan Deng, Wei Zhu, Yao Wang, China
09:40 17-141 KN 3d-4f Oxides: Fabrications and Application Ihab A Abdel-Latif, Saudi Arabia
10:20 17-85 MOF Derived Catalyst for Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cell
Noaman Khan, Saim Saher, Xuan Shi, Muhammad Noman, Pakistan
10:40-11:00 Tea Break
Session-7 (Lecture Room No. 1) Tuesday, October 17, 2017 Time 11:00-12:40 Chairperson: F. A. Khalid & Tae Kwon Song
11:00 Video Lec. Friction Stir Welding: Fundamentals & Applications Bradley P Wynne, United Kingdom 11:40 17-211 KN Development of Texture During Metal Working; its
Industrial Importance Javed Kamran, , Pakistan
12:20 17-44 Enhanced Photo-Electrochemical and Photocatalytic Performances in Fe-Doped SrTiO3/TiO2 nanofiber Films
Olfa Khemakhem, Jamila Ben Naceur, Wissem Cheikhrouhou-Koubaa, Mohamed Koubaa, Radhouane Chtourou, Abdelwaheb Cheikhrouhou, Tunisia
12:40-14:00 Lunch & Prayer Break
5
Session-8 (Lecture Room No. 2) Tuesday, October 17, 2017 Time 11:00-12:40
Chairperson: Ihtizaz Qamar & Paula M. Vilarinho
11:00 17-302 KN New Piezoelectric and Thermoelectric Materials Jing-Feng Li, China
11:40 17-48 Fabrication of Optimized Polydimethylsiloxane (PDMS) Textured Films and their Applications in Performance Enhancement of Flat Silicon Cells, Perovskite Cells and Tandem Solar Cells
Asad Ali, Pakistan
12:00 17-204 Role of Sr Content in ZnO Thin Films for Band Tailing Application
F. Iqbal, Muhammad Asif Nawaz, M. Asghar, Pakistan
12:20 17-7 Design and Fabrication of Thermoelectric Cells Based on Organic Semiconductors NiPc: C60
Iqra Kiran, Khasan S. Karimov, Pakistan
12:40-14:00 Lunch & Prayer Break
Session-09 (Lecture Room No. 3) Tuesday, October 17, 2017 Time 11:00-12:40
Chairperson: Akhlaq Ahmad & M. Imran Khan
11:00 17-309 KN Vacuum Measurement Standards and Vacuum Gauges Calibration for Metallurgical Applications
Seung Soo Hong, S. W. Kang, J.A. Bhatti, M. Maqsood, W. Khan, R. Shahzad, South Korea
6
11:40 17-203 Thermal Assessment and Morphological Study of Newly Synthesized Composite Material Using Unserviceable 2,4,6 Tri-Nitrotoluene
Muhammad Farooq Ahmed, Pakistan
12:00 17-230 Telephoto Lens Design for Long Range Compact Visual Optical System
M. M. Talha, K. Dad, K. Ahmed, J. Rafi, A. Gul, Pakistan
12:20 17-319 Ferroelectric and Piezoelectric Response in BiFeO3-BaTiO3 Ceramics by Quenching Process
Adnan Maqbool, Ali Hussain, Rizwan Ahmed Malik, Tae Kwon Song, Won-Jeong Kim, Myong-Ho Kim, Pakistan
12:40-14:00 Lunch & Prayer Break
Session-10 (Lecture Room No. 1) Tuesday, October 17, 2017 Time 14:00-15:40
Chairperson: Muhammad Shahid & Tae Kwon Song
14:00 17-201 KN Oxidized Titanium for Biomedical Applications Huseyin Cimenoglu, Turkey
14:40 17-73 Cellulose Acetate/PEG/Hydroxyapatite Blended Membranes for Dialysis Operation
Hizba Waheed, Hizba, Arshad Hussain, Pakistan
15:00 17-76 Hybrid Nanocomposites of CNT Reinforced HAP and SS 316L for Biomedical Application
Muhammad Asif Hussain, Muhammad Shahzeb Khan, Adnan Maqbool, Abbas Saeed Hakeem, Nabi Bakhsh, Fazal Ahmad Khalid, Pakistan
15:20 17-293 Effect of Aluminum Oxide (Al2O3) Thickness Variation on Soft and Electrical Properties of FeGaB/Al2O3/FeGaB Multilayer Structure
Shahid Imran, Yungui Ma, Sailing He, Pakistan
7
15:40-16:00 Tea Break
Session-11 (Lecture Room No. 2) Tuesday, October 17, 2017 Time 14:00-15:40 Chairperson: Wilayat Hussain & Su Jun Wu
14:00 17-68 Pressure-Time Curve Study of Slow Burning Rate AP/HTPB Based Composite Propellant by Using Closed Vessel Test (CVT) Equipment
Amir Mukhtar, Habib Nasir, Hizba Waheed, Pakistan
14:20 17-287 Effect of Sulpher on Magnetic Properties of Permanent Magnets
Waqas Latif, Madiha Noureen, Amir Nusair, Saleem Akhtar, M. Farooque, Pakistan
14:40 17-67 Vibrational Properties of Ru2FeX (X= Si, Ge and Sn) Full Heusler Type Alloys: a First Principle Study
Muhammad Rizwan Khan, Afaq Ahmad, Najam ul Arfin, Pakistan
15:00 17-238 Use of a Phase Change Material to Investigate the Performance of Pin Finned Heat Sinks
Muhammad Hashir, Pakistan
15:20 17-254 Comparative Optical Analysis of Conventional and Silicon Inter digitated back contact PV Modules with Aluminum Foil Flex-Circuits.
Asma Shamim, Pakistan
15:40-16:00 Tea Break
8
Session-12 (Lecture Room No. 3)
Tuesday, October 17, 2017 Time 14:00-15:40 Chairperson: M. Afzal Khan & Jing-Feng Li
14:00 17-343 Study of Physical Properties of Copper Doped SnS Thin Films
Ghulam Hasnain Tariq, Pakistan
14:20 17-338 Facile Synthesis and Study of Physical Properties of Barium Hexaferrite
Ghulam Asghar, Sidra Asri, M Anis-ur-Rehman, Syed Nasir Khusro, Saifullah Awan, Ghulam Hasnain Tariq, Faiza Shabir, Pakistan
14:40 17-327 Synthesis of Longer Length Titanium Nanotubes Having More Functional Area
Muhammad Bilal, Zubair Khaliq, Abdul Jabbar, Muhammad Ali Afzal, Ahsan Nazir, Zulfiqar Ali Malik, Pakistan
15:00 17-325 Next Generation Solar Cells Muhammad Atif Makhdoom, Pakistan
15:20 17-326 The Unusual Viscosity Behavior of Cellulose Solutions in N,N-Dimethyl Acetamide and Lithium Chloride
Zubair Khaliq, Muhammad Bilal Qadir, Muhammad Ali Afzal, Ahsan Nazir, Abdul Jabbar, Zulfiqar Ali Malik, Pakistan
15:40-16:00 Tea Break
Session-13 Tuesday, October 17, 2017 Time 16:00-17:15
Chairperson: Poster Judges
17-3 Preparation of Neodymium-a Rare Earth Metal-from Fluoride Salt by Pyrometallurgical Process
Ali Murad, Pakistan
9
17-6 First Principles Study of Band Gap Engineering in Transition Metals Doped ZnO
Tariq Munir, W.Hussain, A. Ahmed, N.Amin, M.Kashif, A.Shahzad, Pakistan
17-8 Reduction of Chromium Metal Using Polyester Membrane Reactor Adhered with ZnO-CuO Nano-composites
Nyla Amjed, Pakistan
17-9 Free Energy and Pressure of Complex Liquid Material Using Equilibrium Molecular Dynamics Simulations
Aamir Shahzad, Muhammad Ali, Muhammad Shahzad Shifa, Maogang He, Pakistan
17-15 Metal/Nonmetal Doped Zinc Oxide Based Highly Transparent Coatings for Self-Cleaning Window Glass
Adeel Riaz, Amna Ashraf, Hymna Taimoor, M. Kamran Tariq, Sofia Javed, Aftab Akram, Mohammad Mujahid, Pakistan
17-16 Fabrication and Characterization of Pb(Zr0.5Ti0.5)O3 Nanofibers for Nanogenerator Applications
Syed Shaheen Shah, Pakistan
17-17 Use of ZnO Nanoparticles as Plant Growth Promoters in Agriculture
Ayesha, Pakistan
17-18 The Petroleum Refining and the Production of the Gasoline with High Quality in the Petroleum Refinery of Arzew Algeria
Menouar Hanafi, Algeria
17-19 Microstructure and Weld Efficiency of Thermo-Mechanically Processed TIG Welded Nugget of AA 6061-T6
Mudassar Hussain, Pakistan
10
17-20 Predictive FEM Analysis for Filling Load and Metal Flow in Closed Die Forging of AA6061 Alloy Disc
Mudassar Hussain, Pakistan
17-21 Kinematic and Morphological Study of Interaction Between Flux and AA 6061 Melt
Mudassar Hussain, Pakistan
17-24 Superplastic Behavior of Al-Mg-Mn alloy: Experimental & Numerical Investigation
Rehan Qayyume, Tayyaba Zaman, Amjad Ali, Shaheed Khan, Chaoli Ma, Pakistan
17-25 Effect of Friction Stir Welding Parameters on Microstructure and Corrosion Behavior of AA6061-T6 Alloy
Tayyaba Zaman, Q. Ahmed, Amjad Ali, Pakistan
17-28 Dielectric and Electrical Properties of Graphene Oxide Based Barium Titinate Composite Films for Electro-Responsive Technological Applications
Mohammad Sohail, Mohammad Saleem khan, Noor Saeed, Majid Khan, Muhammad Arif, Sami ur Rahman, Pakistan
17-30 Encapsulation of Alpha Tocopherol in Chitosan Micro-Spheres for Multifunctional Textiles
Zulfiqar Ali Raza, Hafiza Ayesha Azam, Muhammad Irfan majeed, Shahina Riaz, Pakistan
17-31 Fabrication and Characterization of Polyhydroxybutyrate Based Metal Sulphides Nanocomposites
Zulfiqar Ali Raza, Shahina Riaz, Muhammad Irfan majeed, Hafiza Ayesha Azam, Pakistan
17-32 Rutherford Backscattering and Photoluminescence Investigations of Nanostructured Ge Thin Films with Annealing
Abdul Faheem Khan, Kashif Naveed, M.A. Basit, Pakistan
11
17-33 Highly Selective and Sensitive Gold Nanopartcle Colorometric Assay and Its Application for Pefloxacine Determination
Aaliya, Muhammad Ishaq, Imtiaz Ahmad, Muhammad Raza Shah, Pakistan
17-34 Vibration Analysis of Single-Walled Carbon Nanotubes Based on Non-local Elasticity Theory Using Wave Propagation Approach
Muzamal Hussain, M. Nawaz Naeem, Aamir Shahzad, Maogang He, Pakistan
17-36 Effect of Thermal Treatments on the Schottky Contact on Polycrystalline PbS Thin Film
Abubakar, M Mansoor, S Zaman, M M Asim, Pakistan
17-37 Graphene Reinforced Gold Nanoparticles: New Platform for the Development of Biosensors to Detect Essential Biomolecules
Ayesha Taj, Pakistan
17-38 Analysis of Electric Transport Mechanism of Barium Titanate by Impedance Spectroscopy
Hadia Noor, Saira Riaz, Nudrat Humera, Shahzad Naseem, Pakistan
17-39 Dependence of Lattice Distortion and Dielectric Response of Zinc Aluminate on Milling Frequency
Hadia Noor, Saira Riaz, Malik Maryyam Iram, Shahzad Naseem, Pakistan
17-40 Investigation of the Role of PH on Structural and Morphological Properties of Titanium Dioxide (TiO2) Nanoparticles
Hafeez Anwar, Shaukat Ali Sadiq, Zainab Waseem, Yasir Jamil, Pakistan
12
17-41 Synthesis of ZnO Nanoparticles and their Application for Photocatalytic Degradation of Rhodamine B
Hafeez Anwar, Bushra Chand Rana, Yasir Jamil, Yasir Javed, Iqra Aslam, Pakistan
17-42 Study of Bimetallic/CNTs for Sodium Ion Battery Applications
Fouzia Ghafoor, Pakistan
17-43 Thermal Stability of Ultra High Molecular Weight Polyethylene Nano Composites with Mg0.15 Ni0.15 Zn0.7Fe2O3
Asad Muhammad Azam, Malik Sajjad Mehmood, Pakistan
17-45 Photocatalytic Degradation of Natural Organic Matter (NOMs) from Wastewater by Immobilized Iodine Doped Zinc Oxide
Nyla Amjed, Pakistan
17-46 Photocatalytic Reduction of Nickel from Wastewater Using Nano (ZnO/CaO) Through Membrane Reactor
Nyla Amjed, Pakistan
17-47 Photocatalytic Degradation of Natural Organic Matter (NOM) Using Cu Doped ZnO Nanomaterial Adhered on Fabric Membrane
Muhammad Mohsin, Pakistan
17-49 Self-Cleaning Glass Surface to Maximize the PV Modules Efficiency
M. Hasnain Tarmazi, Basit Nazir, Ahmad Khan, Adnan Ayaz, Hussain Ahmad, Saim Saher, Rizwan Mahmood Gul, Pakistan
17-50 Effect of Wind Loads on the Performance of Photovoltaic (PV) Modules
Rizwan Mahmood Gul, M. Saad Rehan, Humera Ahsan, Fahd Ullah Zafar, M. Asif, Pakistan
13
17-52 To Study the Effects of Humidity on the Performance of Solar PV Module Using Accelerated Aging Test
Faizan Ahmad Khan, Muhammad Alam Zaib Khan, Muhammad Ali Kamran, Rizwan Mehmood Gul, Saim Saher, Pakistan
17-53 Functionalization of Magnetic Chitosan with Graphene Oxide for Removal of Cationic and Anionic Dyes from Aqueous Solution
Kashif Gul, Saima Sohni, Pakistan
17-54 Development of Kiln Furniture from Locally Available Raw Materials
Akhtar Shahnaz, Bakht Bahadur Rana, Phool Shahzadi, Zaib Hussain, Muhammad Boota, Pakistan
17-55 Development of Cost Effective Light Weight Insulating Material for Building Roof Top
Bakht Bahadur Rana, Akhtar Shahnaz, Amir Sultan, Fadia Shaheen, Phool Shahzadi, Hafiz Khurram Ali, Pakistan
17-56 Comparative Study of Influence of Anion on Microstructural Development and Sintering of Nanosized Alumina
Fadia Shaheen, Muhammad Irfan, Bakht Bahadur Rana, Rashad Mahmood, Muhammad Latif Mirza, Pakistan
17-57 Comparative Study of Influence of Anions on Thermal Behavior of Nanosized Alumina
Fadia Shaheen, Muhammad Irfan, Bakht Bahadur Rana, Rashad Mahmood, Muhammad Latif Mirza, Pakistan
17-58 Commercial Utilization of Fly Ash for Construction Muhammad Latif, Muhammad Usman Alvi, Ammarah Kanwal,
Muhammad Iqbal, Pakistan 17-59 Synthesis, Characterization and Applications of Metallic
Nanoparticles Using Cruciferous Vegetables G. Zuhra Memon, Kanwal Zehra, Pakistan
14
17-62 Synthesis of Template-Free Nickel Nanowires by Electro Deposition Method
Shafaq Ansari, Ali Dad Chandio, Muhammad Sohail, Pakistan
17-63 A Study on Fe2O3-Titania Synthesis of Composite Materials by Using Ball Milling Method.
Bushra Sana Idrees, Yasir Jamil, Sidra Baby, Pakistan
17-64 Pursue an Optimized Mn Substituted BiFeO3 Multiferroic and Study of Magnetodielectric Effect
Ali Haider Khan, Shahid Atiq, MurtazaSaleem, Shahzad Naseem, Pakistan
17-65 Ti-Nb-Al Ternary Shape Memory Alloys for Biomedical Applications
Muhammad Umer Farooq, Tahir Sattar, Irfan Haider Abidi, Asif Hussain, Adnan Maqbool, Ghuzanfar Saeed, Muhammad Tariq Saeed Chani, Hamid Zaigham, Fazal Ahmad Khalid, Pakistan
17-66 Investigation of Hydrogen Gas Production from MSW (municipal Solid Waste) by the Pyrolysis Process
Syed Muhammad Ishaq, Asif Ali Khan, Umair Ahmed, Muhammad Ali Aleem, Muhammad Usman Ansari, Muhammad Shaheer Rafi, Muhammad Yasir Khan, Pakistan
17-69 Development of Lightweight Aluminum-Titanium Alloys for Aerospace Applications
Syeda Ammara Batool, Abdul Wadood, Abdul Mateen, Syed Wilayat Hussain, Pakistan
17-70 Production of Bio-Gas from Kitchen Waste Using Anaerobic Digestion
Usman Ansari, Muhammad Maaz Junaid, Muhammad Shaheer Rafi, Muhammad Ali Aleem, Syed Muhammad Ishaq, Muhammad Yasir Khan, Pakistan
17-71 Response Surface Methodology and Optimization of Cooking Power/Effective Efficiency in a Solar Box Type Oven
Khuram Ali, Khuram Ali, Pakistan
15
17-72 Design and Development of Electrohydrodynamic Printing Head
Malik Hassan, Muhammad Waseem Khan, Pakistan
17-74 Optimization of Ni-P Electroless Coatings for Wear Resistance Applications
Tauheed Shehbaz, Pakistan
17-78 Strengthening of X7CrNiAl 17-7 Via Transformation and Age Hardening
Shahroz Sakhawat, Vienna
17-79 Synthesis, Characterization and Sorption Behavior of Newly Synthesized Polymers of Bis(2-Hydroxynaphaldehyde) with Different Metal Ions
Ambreen Shah, Pakistan
17-82 Investigation of Hot Section (Nozzle Guiding Vane) Distress Due to Interaction of Thermal Barrier Costing with CMAS
Qadeer Ahmed, I.N Qureshi, I.Salam, Pakistan
17-84 Molecularly Imprinted Polymer for Recognition and Removal of Selective Antibiotics
Mir Muhammad, G. Zuhra, Pakistan
17-86 Design and Development of Pneumatic Jet Printing Head Muhammad Asees Awan, Pakistan
17-87 Effect of Sintering Time on Phase Transformation of Nd-Si-O System
Muhammad Naveed Rasheed, Muhammad Asif Nawaz, Faisal Iqbal, M Asghar Hashmi, Pakistan
17-88 Synthesis of Efficient TiO2 Nanofertilizer as Growth Regulator for Indigenous Coriander Plant
Aqsa Tunio, Aamna Balouch, Moina Akhtar Mughal, Pakistan
16
17-89 Contamination of Arsenic and other Toxic Elements in Groundwater of Larkana City and its Implication for Health Effects
Abdul Hameed Kori, Mushtaque Ali Jakhrani, Sarfaraz Ahmed Maesar, Pakistan
17-90 Quality Evaluation of Pomegranate Waste and Extracted Oil Zahid Hussain Laghari, Syed Tufail Hussain Sherazi, Sarfaraz Ahmed
Mahesar, Muhammad Saqaf Jagirani, Pakistan 17-91 Synthesis of Efficient Arsenic Tagged Polymeric Material for
Remediation of Contaminated Drinking Water Muhammad Saqaf, Aamna Balouch, Sarfaraz Ahmed Maesar, Akrajas Ali
Umar, Pakistan 17-92 A Simple and Low-Cost Purification Method for Microbial-
Free Water Using Titanium Dioxide Nanoparticles Hafeez Anwar, Yousaf Ali, Ayesha, Yasir Jamil, Pakistan
17-93 Optical Properties of Al-Mg Co-Doped ZnO Nanoparticles Sidra Baby, Yasir Jamil, Bushra Sana Idrees, Pakistan
17-94 Damage of the Adhesive and Its Effect on the Durability and Efficiency of Repair: Elasto-Plastic Study
Laouni Gaidi, Morad Fari Bouanani, Ali Merdji, Ali Benaissa, Algeria
17-95 Neodymium Cobalt Oxide as a Chemical Sensor Ihab A Abdel-Latif, Saudi Arabia
17-96 Synthesis, Characterization and Application of Mercury Imprinted Polymers (Hg-IIPs)
Faraz Ahmed Mustafai, Aamna Balouch, M. Iqbal Bhanger, Pakistan
17-97 Magnetic and Magnetocaloric Properties of RM2 Laves Phases Compounds (R = Er, Tb, Ho and M = Fe, Co)
I. Chaaba, S. Othmani, S. Haj-Khlifa, P. De Rango, W. Cheikhrouhou-Koubaa, D. Fruchart, Abdelwaheb Cheikhrouhou, Tunisia
17
17-101 Kaolinite Modified Carbon Paste Electrode for the Sensitive Determination of Captopril
Sarfaraz Ahmed Maesar, Saeed Ahmed Lakho, Muhammad Saqaf Jagirani, Razium Ali Soomro, Pakistan
17-102 Modeling and Reliability of a Highly Sensitive Graphene FET Based Toxic Gas Nanosensor
Yasir Sabir, Mansoor Ahmed, Pakistan
17-104 Suberic Acid Functionalized CuO Nanoflowers for Enhanced Electrochemical Oxidation of Formoterol Fumarate
Kausar Rajar, Pakistan
17-106 Tribological Characteristics of Modified 12 Wt. % Si Eutectic Aluminum Alloy
Sajawal Hussain, Muhammad Mansoor, RehanQayyume, Shaheed Khan, Pakistan
17-108 Tuning of Thermo-Mechanical Performance: Modified Multiwalled Carbon Nanotubes Reinforced SBR/NBR/SR Nanocomposites
Sadia Sagar Iqbal, Muhammad Adrees, Adnan Ahmed Baloch, Muhammad Shafiq, Muhammad Yasir, Fahad Jamshad, Tahir Jamil, Mohammad Bilal Khan, Pakistan
17-109 Effect of Graphene for Ablation Study of Advanced Composite Materials for Aerospace Applications
Sadia Sagar Iqbal, Aneela Sabir, Atif Islam, Shahzad Maqsood Khan, Muhammad Yasir, Tahir Jamil, Zaffar M Khan, Pakistan
17-110 Design and Development of Selective Laser Sintering Mechanism
Muhammad Tayyab, Abdul Samad Khan, Pakistan
17-111 Fabrication of Selective Ion-Imprinted Polymer for Solid Phase Extraction of Selective Metal Ions from Aqueous Solution
G. Zuhra Mudassar, Sumera Sarwer, M.A. Kazi, Pakistan
18
17-112 Transfer Function for Electro-Hydrodynamic Printing Salman Ahmad, Waqas Kamal, Pakistan
17-113 Synthesis and Characterization of Nafion/ Titanium, Zirconium Silicon Oxide Nanocomposite Membranes for Polymer Electrolyte Membrane Fuel Cells.
Riaz Ahmed, Ambreen Shahzadi, M.Siddiq, Pakistan
17-114 Comparison of Pt-Ni/C Nano Alloy Catalysts Prepared by Conventional and Reverse Micro Emulsion Methods for Polymer Electrolyte Membrane Fuel Cells
Riaz Ahmed, Rabia Jamil, Muhammad Shahid Ansari, Pakistan
17-115 Prediction of the Ratcheting Behavior Through Micromechanical Mechanisms
Noureddine Della, Ali Merdji, Mekki Larabi, Bahri Ould Chikh, Algeria
17-116 Turndesign eco edition: a feature modeler for manufacturing energy and carbon footprint estimation of rotational parts
S. Engin Kiliç, Ural Uluer, Turkey
17-117 Development and Characterization of Super-Absorbent Polymer Composites by Using Nano Clay
Muddassir Ali Memon, Muhammad Moazam baloch, Muhammad Waseem Akhtar, Pakistan
17-120 Study on Some Physical Properties of Cu11MO12 (M=Cu, Ni and Co) Nanocomposite: ab-initio Study
Ihab A Abdel-Latif, H. Y. Ammar, S. Al-Heniti, Saudi Arabia
17-121 Design of Three-Layer Anti-reflection Coating for High Reflection Index Lead Chalcogenide Surface
Muhammad Mansoor, Abubakar, Sabah Zaman, Muhammad Muneeb Asim, Pakistan
17-122 Modeling of Reactive Melt Infiltration Used in the Fabrication of Si-Co/C Composites
Khurram Iqbal, Pakistan
19
17-123 Enhanced Corrosion Resistance of SiCp/ 2009 Al by Cerium and Lanthanum Conversion Treatment
Irfan Aziz, Zhang Qi, Pakistan
17-125 Welding of Ti-5Al-2.5Sn Alloy Using Different Welding Techniques
Muhammad Omer Farooq, Massab Junaid, Fahad Nawaz Khan, Khalid Rahman, Pakistan
17-126 Spectroscopic Analysis of Ultra-High Molecular Weight Polyethylene and Mg-Ni-Doped ZnFe2O3 Nanocomposites
Malik Sajjad Mehmood, Asad Muhammad Azam, Tariq Yasin, Pakistan
17-127 Effect of Different Parameters on Structural and Mechanical Properties of Ni3Al Coating Deposited by APS on H-13 Steel
Sabah Zaman, K. Mehmood, M.M. Asim, S. Abbas, M. Rauf, S. Khan, Pakistan
17-129 Effect of Reactant Concentration and Sintering Treatment on the Structural and Physical Properties of Gamma Iron Oxide Nanoparticles
Sabah Zaman, M. Mansoor, M. A. Aleem, M.M. Asim, Pakistan
17-130 Changes in the Bainitic Microstructure in the Normalized-And-Tempered Cr-Mo-V-Ti Steel Designed for Service at Elevated Temperatures
Z. Lawrynowicz, Poland
17-131 Stress Relaxation Behavior of Annealed Aluminum/Carbon Nanotubes Composite
Muhammad Mansoor, Muhammad Shahid, Pakistan
17-132 Determination of Ternary Phase Diagrams Using Diffusion Couples with Key Alloys Approach
Ahmad Mostafa, Mamoun Medraj, United Arab Emirates
20
17-133 The Effect of Food Materials on the Longevity of Dental Implant in the Bone
Ali Merdji, Ali Benaissa, Laid Aminallah, Noureddine Della, Ibrahim Othman Zaid, Algeria
17-136 Experimental Characterization of Polypropylene Filter Media Electrostatic Charging
Youcef Ben Mimoun, Mohamed Fethi Bekkara, Lucien Dascalescu, Thami Zeghloul, Fouad Kherbouche, Kaddour Miloudi, Algeria
17-137 Using Special Coating Material to Reduce Dust Accumulation Effect on PV Power Output
Iyad Muslih, AzzahAl Khalailah, Jordan
17-138 Functional Materials Based on Conducting Polymers and Mesoporous Silica
Mohamad Ayad, Egypt
17-139 Comparison between Direct Cold and Hot Extrusion Processes, Parameters Affecting them and Theoretical and Experimental Issues: State of the Art
Safwan M. Al-Qawabah, Jordan
17-140 Effect of Grain Refinement Commercially Pure Aluminum on Its Metallurgical Aspects, Mechanical and Characteristics, Fatigue Life and Strength
Adnan Ibrahim Othman Zaid, Jordan
17-142 Synthesis and Deposition of Hydroxyapatite Coating for Biomedical Implants
Umair Siddique, Muhammad Owais Ahmad, Muhammad Yasir, Ghufran Ur Rehman, Pakistan
17-143 Polyaniline Enhanced Supercapacitance of Cobalt Hydroxide Nanowires/Carbon Nanotube Containing Polymer Sponge Layered Composite
Syed Hashim Shah, Muhammad Imran Khan, Rida Sarfraz, Rozeen Nazir, Ashraf Ali, Pakistan
21
17-144 Se and Cu Doped TiO2 nanocatalysts for Environmental Remediation
Zaib-un-Nisa, Habib Nasir, Pakistan
17-145 Fabrication of Cellulose/Hydeoxapatite Composite for Bone Replacements
Fatima Nisar, Usman bin Khalid, Sofia Javed, Muhammad Aftab Akram, Mohammad Mujahid, Pakistan
17-146 Deposition of Vertically Aligned High Aspect Ratio Zinc Oxide Nano Rods for Gas Sensing Applications
Dawar Ali, Jawad Asif, M. Zafar Khan, Shazrah Shahzad, Sofia Javed, Aftab Akram, Umair Manzoor, Muhammad Mujahid, Pakistan
17-147 Hydrothermal Synthesis of ZnO Nanorods and Its Application for Eradication of Pb (II) Ions
Sadia Atta, Anila Tabassum, Muhammad Imran Din, Atif Islam, Misbah Sultan, Momina Faroz, Abdul Ahad, Nafisa Gull, Pakistan
17-148 Grafting of Silica Particles with Linoleic Acid via Modified Stober’s Method for Pre-concentration of Pesticides in Drinking Water
Sadia Atta, Mehreen Fatima, Atif Islam, Nafisa Gull, Misbah Sultan, Pakistan
17-149 Hydrophilic Coatings: A Review Madiha Nazir, Pakistan
17-150 Hybrid Effect of TiO2/Reduced Graphene Oxide Based Composite for Photocatalytic Water Splitting & Strain Sensing
Syed Munir Azeem, Muhammad Talha Saleem, Chaudhary Sharjeel Ahmed, Isna Masood, Pakistan
17-152 Enhanced Ionic Conductivity in Co-Doped Composite Electrolyte for LT-SOFC
Rabia Toor, Omer Farooq, Fatima-tuz-Zahra, M. Anis-ur-Rehman, Pakistan
22
17-153 Structural and Thermoelectric Properties of Gd Doped Bi2Te3 Faiza Arif, Omer Farooq, Fatima-tuz-Zahra, M. Anis-ur-Rehman,
Pakistan 17-154 Resistivity Enhancement of Sr-Hexaferrite Using Rare Earth
Dopant to Minimize Energy Losses Nahall Niazi, Omer Farooq, Fatima-tuz-Zahra, M.Anis-ur-Rehman,
Pakistan 17-155 Synthesis of ZnO and RGO Nano Composite Based
Supercapacitor and Comparison of the Capacitance of Electrodes Having Different Morphologies of ZnO Nanoparticles
Talha, Muhammad Hassaan, Muhammad Yousuf Anwer, Pakistan
17-156 Variation in the Structural and the Electrical Properties of Cr-Zn Doped Strontium Hexaferrites
Sana Mehmood, Omer Farooq, Fatima-tuz-Zahra, M. Anis-ur Rehman, Pakistan
17-158 Synthesis of TiO2 Nanotubes by Anodization and Role of Fluoride Ions Concentration on their Formation
Farah Yasin, Asma Salman, Eng. Ameeq Farooq, Areeba Tariq, Pakistan
17-159 Synthesis of TiO2 Nanotubes by Anodization and Role of Fluoride Ions Concentration on their Formation
Farah Yasin, Asma Salman, Engr. Ameeq Farooq, Areeba Tariq, Pakistan
17-160 Synthesis and Investigation of AC Electrical Properties of NiO-CeO2-Gd2O3 nanocomposite for SOFCs Application
Muhammad Sufian Sadiq, Muhammad Anis-ur-Rehman, Pakistan
17-161 Investigation of Effect of RE Doping on Thermoelectric Properties of Bismuth Telluride Synthesized by Simplified Sol-gel Method
M. Waqas, O. Farooq, Fatima-tuz-Zahra, M. Anis-ur-Rehman, Pakistan
23
17-162 Fabrication and Characterization of Laser Scribed Supercapacitor Based on Polyimide for Energy Storage
Tayyaba Malik, Shayan Naveed, Mohammad Ali Mohammad, Muhammad Muneer, Pakistan
17-163 Facile and Low Temperature Synthesis of Anatase TiO2 Nanoparticles and Its Application in Nanocrystalline Thin Films
Muhammad Arsalan, Ali Dad Chandio, Muhammad Sohail, M. Wasim Akhtar, Mahnoor mushtaq, Hira ali khan, Muhammad Yasir Khan, Pakistan
17-164 Comparative Study of Weld-Ability and Mechanical Properties of 2195 and 2060 Third Generation Aluminum-Lithium Alloys
Naveed Akhtar, Su Jun Wu, Pakistan
17-165 Effect of Cryogenic Treatment on Corrosion Resistance of Medium Carbon Low Alloy Steel AISI 4340
Zubia Anwer, Muhammad Sohail, Pakistan
17-166 Potentiometric Study on the Effect of Temperature on the Polarity Reversal Phenomenon of Magnesium -Steel Galvanic Couple in Solution of Nahco3 and Tap Water
Fahad Riaz, Muhammad Sohail, Pakistan
17-167 Parametric Analysis of Bus-Bars in Solar Cells of a Photovoltaic Module
Rahat Saeed, Muhammad Saad Rehan, Fahad Ullah Zafar, Muhammad Noman, Rizwan Mahmood Gul, Pakistan
17-168 Finite Element Analysis of Photovoltaic Modules with Textured Glass as a Top Surface
Muhammad Saad Rehan, Fahad Ullah Zafar, Rahat Saeed, Muhammad Noman, Rizwan Mahmood Gul, Pakistan
17:15 Ice Cream
24
Session-14 (Lecture Room No. 1) Wednesday, October 18, 2017 Time 09:00-10:40
Chairperson: Shaheed Khan & Ihab A. Abdel-Latif
09:00 17-26 KN Development of Novel Nano-Coatings Through Experimental Techniques, Mathematical Modelling and Simulation
Zulfiqar Khan, Hammad Nazir, Keith Stokes, Rizwan Bajwa, Vasilios Bakolas, Wolfgang Braun, Parisa Pashaei, United Kingdom
09:40 17-247 Synthesis and Application of Super-Hydrophobic Coatings Ali Dad Chandio, Sania Aslam, Samra Raees, Areeba Faroqui, Pakistan
10:00 17-151 The Study of Adhesive Strength of Diamalloy 3002NS Coatings Using High Velocity Oxy Fuel (HVOF) Thermal Spray Method
Sara Hashmi, Abdul Mateen, Pakistan
10:20 17-174 Graphene Oxide Coatings Deposited on Steel Substrate using Electrophoretic Deposition and Electrochemical Evaluation of Coatings in Saline Media
Zaeem Ur Rehman, Pakistan
10:40-11:00 Tea Break
Session-15 (Lecture Room No. 1) Wednesday, October 18, 2017 Time 11:00-12:40
Chairperson: Ashraf Ali & A. Chiekhrouhou
11:00 17-307 KN Recent Developments in Rare Earth Based Magnets and their Corrosion Protection
Akhlaq Ahmad, A. Ali, Z. Ahmad, Pakistan
25
11:40 17-29 Characterization of Structural, Optical, Electronic, Elastic, Dynamic and Thermodynamic Properties of B1-XAlxN Alloy by Ab-initio Method
P.Pashaei, M. Kemal Öztürk, A.Gültekin, Zulfiqar Khan, United Kingdom
12:00 17-205 Fabrication and Electrical Characterization of Nano Er2O3 Asghari Maqsood, Zainab ul Ghazali, Pakistan
12:20 17-27 Investigation of Various Nano Structural Morphologies of Zinc Oxide (ZnO) for their Applications in Dye-Sensitized Solar Cells (DSSCs)
Syed Abrar Hussain Shah, Muhammad Sulaik Ullha Iqbal, Hafiz Muhammad Bin Ahmed, Muhammad Ramzan Abdul Karim, Ehsan Ul Haq, Azhar Hussain, Khalid Mahmood, Yasir Faheem Joya, Ashraf Ali, Pakistan
12:40-14:00 Lunch & Prayer Break
Session-16 (Lecture Room No. 2) Wednesday, October 18, 2017 Time 11:00-12:40
Chairperson: Anjum Tauqir & Paula M. Vilarinho
11:00 17-128 KN Next-Generation Biomaterials for Bone-Tissue Regeneration: Mg-Alloys on the Move
Yasir Faheem Joya, Ashraf Ali, Pakistan
11:40 17-119 Mossbauer Study of Nanocomposites MnFe2O4 Synthesized Using Sol-Gel Method
Ihab A Abdel-Latif, Gismelseed Abbasher M, Zaki H, Al-Maashani Mohammed, Pakistan
12:00 17-178 MgO-CZ Composite Clinkers Based Egyptian Magnesite/Dolomite Resources for Cement Industry
Emad Mohamed M. Ewais, Egypt
26
12:20 17-227 Synthesis and Functionalization of Mesoporous Silica for Effective Removal of Metal Ions from Aqueous Solutions
Salma Amir, Pakistan
12:40-14:00 Lunch & Prayer Break
Session-17 (Lecture Room No. 3) Wednesday, October 18, 2017 Time 11:00-12:40
Chairperson: Olfa Khemakhem & Waseem Haider
11:00 17-11 KN Down-Scaling to Nano-Size: a Great Way to Make Nanoscale Materials Multifunctional and Applicable
Sher Bahadar Khan, Saudi Arabia
11:40 17-77 Enhancement of Thermoelectric Property in Sb Doped Tl10-
XSbxTe6 nano-Structural System Wiqar Hussain, Pakistan
12:00 17-100 Investigations of Non-Linear Viscoelastic Properties for Polypropylene/Clay-Nanocomposites Through Melt Flow Birefringence and Damping Function
Maryam Mudasir, Riaz Ahmed, Pakistan
12:20 17-103 Casting Simulation for Sand-Casting of Aluminum Boat Propeller
Rashid, S. Zameer Abbas, Amjad Khan, Khalid Hassan, S. Jawad Ali Shah, Pakistan
12:40-14:00 Lunch & Prayer Break
27
Session-18 (Lecture Room No. 1)
Wednesday, October 18, 2017 Time 14:00-15:00
Chairperson: Syed Wilayat Hussain
Video Lecture: D A Allwood Stress Control and Emergent Behavior of Domain Walls
in Patterned Ferromagnetic Nanorings
Session-18A Wednesday, October 18, 2017 Time 15:00-16:30
Chairperson: Poster Judges
Failure Analyses Case Studies - Poster Competition FACS-1 Rectification of welding cracks and porosity in thin pipes of
AA-6061 – A case study T. Ahmed, W. Muhammad, M. Kamran, I. Slam, S. Khan, Pakistan FACS-2 Failure Analysis of leakage in a thin walled cylinder of ultra-
high strength steel M. Kamran, W. Muhammad, I. Slam, Pakistan
FACS-3 Failure Analysis of a Forged Steel Block K. Mehmood, Liaqat. Ali, S.A. Rizvi, I. Salam, S. Khan, Pakistan FACS-4 Effect of Forging Ratio on the Mechanical Properties of the
High Strength Low Alloy Steel (HSLA) S.A. Rizvi, K. Mehmood, Liaqat. Ali, I. Salam, S. Khan, Pakistan
28
FACS-5 Material Characterization of the barrel subjected to Autofrettage Test (AFT)
K. Mehmood, Liaqat. Ali, S.A. Rizvi, I. Salam, S. Khan, Pakistan FACS-6 Failure Analysis of Bainitic Steel Pipe - Failed During Cold
Working Process Sajawal Hussain, M. Mudassar Rauf, A. Nusair Khan, I. Salam, Pakistan FACS-7 Metallurgical Problems and Rectification in Die-Forged
Aluminum Alloy- AA 6061 Tayyaba Zaman, R. Qayyume, Amjad Ali, S. Khan, Pakistan FACS-8 Metallurgical Analysis and Optimization of Parameters for
Welding Super austenitic Blades and Disc M. Mudassar Rauf, Sajawal Hussain, Sabih-ur-Rehman, R. Qayyume,
I. Salam, S. Khan, Pakistan FACS-9 Investigation of Hot section (Nozzle Guiding Vane) Distress
due to Interaction of Thermal Barrier Coatings with CMAS Q. Ahmed, I. N Qureshi. I. Salam, Pakistan FACS-11 Failure Analysis of Engine Bearing I. N. Qureshi, N. Ejaz, M. Waseem, Pakistan FACS-12 High Alloy Steel Pipe Failure due to Internal Defects H. Qaiser, A. Usman, I. Salam, S. Khan, Pakistan
FACS-13 Thermal Fatigue Failure of Fuel Spray Bars of a Jet Engine After Burner
M. Mansoor, N. Ejaz, Pakistan FACS-14 Fatigue Failure of an Aircraft Wings due to Fitting Error in
Hi-Locks M. Mansoor, N. Ejaz, Pakistan FACS-15 Joining Error Resulted in Failure of an Aircraft Engine Radial
Diffuser N. Ejaz, I. Salam., M. Mansoor, A. Tauqir, Pakistan
29
FACS-16 Pole-piece Fatigue Failure of Alternator Assembly due to Design Error
Muhammad Mansoor, Muhammad Shahid, Muhammad Irfan, Pakistan FACS-17 Centrifugal compressor failure due to forging defects N. Ejaz, Pakistan FACS-18 Investigation of Failure in Thermal Barrier Coating on
Turbine First Rotor Blade Reda Batool, Naqvi, Rashid Ali, Tauheed Shehbaz, Pakistan FACS-19 Failure Analysis of Drop tank Suspension Rod of JF-17
Aircraft Obaid ur Rauf, Pakistan FACS-20 Failure Analysis of a High Pressure Butt-Weld Flange Furqan Ahmed, Pakistan
FACS-21 Failure of Pipe Joints During Hydrostatic Testing Furqan Ahmed, Usman Sikander, Pakistan FACS-22 Investigating the Cause of Defect Formation in an Ammonia
Plant Synthesis Loop Line-Pipe During Repair Process A. Farooq, K. M. Deen, Pakistan FACS-23 Failure of Composite Structure Before their Design Limit due
to Manufacturing Defects Mohsin Ali Fakhar, Pakistan
FACS-24 Root Cause Analysis of Failure in Heat Exchanger Brass Tube
Muhammad Kamran Bhatti, Ghulam Raza, Syed Sajid Hussain, Pakistan FACS-25 Failure of a Tow Bar of Boeing 737-800 Aircraft Wajih ud din Qazi, Pakistan
30
FACS-26 A Case Study on Twisting of the Tail Rotor Shaft of a Helicopter
M. Shahzad, T. Manzoor, Q. Tayyaba, A. H. Qureshi, Pakistan
FACS-28 Caustic Corrosion of Evaporator Finned Tube Ahmed Jawwad, Pakistan
16:30 Tea Break
Session-19 (Lecture Room No. 1) Thursday, October 19, 2017 Time 09:00-10:40
Chairperson: Sara Qaiser & Emad M. M. Ewais
09:00 17-266 KN 2D & 3D Woven Composites with Auxetic Behavior for Improved Mechanical Properties
Yasir Nawab, Pakistan
09:40 17-35 KN Synthesis of Smart Imprinted Materials for Selective Recognition and Removal of Toxic Ions from Aqueous System
Aamna Balouch, Abdullah, Farah Naz Talpur, Pakistan
10:20 17-183 Mechanical and Tribological Properties of Low Temperature PVD Coated Cast Iron
Ghulam Moeen uddin, Jawad Ahmed, Muhammad Gufran, Nasir Hayat, Muhammad Jawad, Pakistan
10:40-11:00 Tea Break
31
Session-20 (Lecture Room No. 1)
Thursday, October 19, 2017 Time 11:00-12:40 Chairperson: Fazal A Khalid
CONFAB. [Nano-Materials]
12:40-14:00 Lunch & Prayer Break
Session-21 (Lecture Room No. 2) Thursday, October 19, 2017 Time 11:00-12:40
Chairperson: Syed Wilayat Hussain
CONFAB. [Ceramics & Coatings]
12:40-14:00 Lunch & Prayer Break
Session-22 (Lecture Room No. 3) Thursday, October 19, 2017 Time 11:00-12:40
Chairperson: Muhammad Mujahid
CONFAB. [Biomaterials]
12:40-14:00 Lunch & Prayer Break
32
Session-23 (Lecture Room No. 1)
Thursday, October 19, 2017 Time 14:00-15:40 Chairperson: Javed Ahsan Bhatty & Jing-Feng Li
14:00 17-306 KN Thermal Fatigue Behavior and Microstructural Evolution of Super alloys
Su Jun Wu, China
14:40 17-12 Surfaces Makes All the Differences in Today’s World: Titanium Oxide Nanotubes for Energy and Biomedical Applications
Waseem Haider, USA
15:00 17-179 Enhanced Piezoelectricity in Lead-Free (K,Na)NbO3 Ceramics
Maria Elizabete Costa, Muhammad Asif Rafiq, Paula Vilarinho, Portugal
15:20 17-185 Conduction Phenomenon in Self Assembled Fe4 Single Molecular Magnet SMMs
Zoobia Ameer, Pakistan
15:40-16:00 Tea Break
Session-24 (Lecture Room No. 2) Thursday, October 19, 2017 Time 14:00-15:40
Chairperson: Waseem Haider & Maria Elizabete Costa
14:00 17-208 Sliding Wear Behavior of Tribaloy T-400 Sprayed Coatings by High Velocity Oxy Fuel (HVOF) Process.
Irum Kulsoom, Abdul Mateen, Yumna Javed, Sidra Arshad, Pakistan
33
14:20 17-107 Efficient Performance of Proton Exchange Membrane Fuel Cell (PEMFC) by Ultra Low Platinum Loading Electro Catalyst for Oxygen Reduction Reaction (ORR)
Gul Wahab, Pakistan
14:40 17-202 Effect of Amine Group Based Reagents on Growth of ZnO Nanorods and Aromatic Compounds Sensing by Dielectric Investigations
Shazrah Shahzad, Jawad Asif, Dawar Ali, Muhammad Zafar Khan, Muhammad Aftab Akram, Sofia Javed, Umair Manzoor, Muhammad Mujahid, Pakistan
15:00 17-173 Development and Characterization of Graphene Reinforced Acrylonitrile Butadiene Styrene (ABS) Composites Via Melt Mixing Method
Mian Muhammad Sohaib Sattar, Pakistan
15:20 17-296 Fused Salt Electrowinning of Neodymium Metal Using Indigenously Developed Electrolytic Cell
Muhammad Imran Khan, Sajjad Ahmad, Adnan Munir, Pakistan
15:40-16:00 Tea Break
Session-25 (Lecture Room No. 3) Thursday, October 19, 2017 Time 14:00-15:40
Chairperson: Sara Qaiser & Sher Bahadar Khan
14:00 17-118 Synthesis and Characterizations of Graphene Based Polymer Composites for Improved Dielectric Properties
Syed Sajid Ali Shah, Habib Nasir, Pakistan
14:20 17-99 Investigation Via Layer-By-Layer (LbL) Nanofabrication of Multilayer Composite Thin Films Using Epoxy and Clay
Sadia Batool, Rohama Gill, Pakistan
34
14:40 17-198 Fortitude of Paracetamol in Aqueous Solution Based on Novel Magnetic Molecularly Imprinted Polymers
Sajjad Ali Chang, Abdul Jabbar Laghari, Waqar Ali Chang, Muhammad Kashif Samoon, Ishafaque Ahmed Larik, Pakistan
15:00 17-75 Schematic Design and Development of Binder Jet-Machine Abdul Latif, Muhammad Usama Faiz, Pakistan
15:20 17-81 Augmented Reality with IoT of a Milling Machine Muhammad Ali Bhutto, Khalid Rehman, Wasim A. Khan, Pakistan
15:40-16:00 Tea Break
Session-26 Thursday, October 19, 2017 Time 16:00-17:15
Chairperson: Poster Judges
17-169 Impact of Joint Line Imperfections on Strength Coefficient of Friction Stir Welded Al-Li Alloy
Naveed Akhtar, Muhammad Afzal, Su Jun Wu, Pakistan
17-170 Optimizing Cold Compression Deformation to Remove Residual Stresses in Die Forged Disc of Al-Mg-Si Alloy
Naveed Akhtar, Muhammad Afzal, Pakistan
17-171 Characterization and Electrochemical Study of Chromium Nitride (CrN) Coating Deposited by Physical Vapor Deposition (PVD) on 316L Stainless Steel Substrate
Muhammad Abaid Ashraf, Pakistan
17-172 Characterization and Catalytic Performance on CH4/CO2 reforming of MgO-Loaded Ni/MAS-24 Catalysts
Roohul Amin, Bingsi Liu, Zhao Yin Chuan, China
35
17-175 Continuous Study for Removal of Actacid Orange-RL Dye Using the Agro-Polymer Composites
Saima Noreen, Haq Nawaz Bhatti, Pakistan
17-181 The Study and the Development of the Renewable Energy in the Aquatic Ecosystem
Latifa Hanafi, Algeria
17-182 The Experience of the P.V. Electrification and the Solar Energy of some Localities in the South of Algeria
Mohamed Hanafi, Algeria
17-184 Change Transport Study on Quasi-1D FePc-TCNE Ferrimagnetic Chain
Zoobia Ameer, Pakistan
17-186 High Dielectric YCTO Thin Films for Electronic Applications
Zoobia Ameer, Pakistan
17-187 Dielectric Properties of Ni-Doped Barium Hexagonal Ferrites (BaFe12O19)
Muhammad Asif Rafiq, Moaz Waqar, Pakistan
17-188 Comparative Analysis of Power Losses in Different Types of Photovoltaic Modules Due to Dust Accumulation
Muhammad Saad Rehan, Alamzaib Khan, Rizwan Mehmood Gul, Syed Roohullah Jan, Ali Kamran, Saim Saher, Pakistan
17-189 Design Fabrication of Scale Model Turning Machine Wasim Ahmad Khan, Abubakar Rashid, Saad Bin Arshad, Muhammad
Hamzah, Zaryab Shahid, Pakistan 17-190 Bioactive Ceramic Composites Materials for Biomedical
Application: A Review Irum Kulsoom, Pakistan
36
17-191 Enhancement of PEM Fuel Cell Stack Power by In-Situ Steaming of a Membrane Electrode Assembly
Mir Meher Ali, Saim Saher, Muhammad Bilal Sajid, Pakistan
17-192 A Comparative Study of Structural and Electrical Properties of Magentoplumbite Hexaferrites
Uzma Afsar, Omer Farooq, Fatima-tuz-Zahra, M. Anis-ur-Rehman, Pakistan
17-193 Photocatalytic Degradation of Methylene Blue by Tin and Indium Doped Sol-Gel Reflux Synthesized Titania
Junaid ur Rehman, Ramsha Khan, Kamran Tariq, Sofia Javed, Mohammad Mujahid, Aftab Akram, Pakistan
17-194 Novel and Facile Low Temperature Synthesis (Below 100 ºC) of Nano-Sized Eu3+ Activated BaTiO3
Usama Bin Humayoun, Yung-Hyun Song, Kenji Toda, Takaki Masaki, Dae-Ho Yoona, South Korea
17-195 Shape Memory Alloys; A Review Menahil Mahmood, Pakistan
17-196 Structural and Electrical Properties of Barium Strontium Cobaltite Nanoparticles Synthesized by Wet Chemical Methods.
Tanveer Akhtar, Omer Farooq, M. Anis-ur-Rehman, Pakistan
17-199 Synthesis and Characterization of MoS2/TiO2 Nanocomposites for Photocatalytic degradation under Sunlight
Ramsha Khan, Junaid Ur Rehman, Sofia Javed, Muhammad Aftab Akram, Rahim Jan, Mohammad Mujahid, Pakistan
17-200 Carbon Nanocomposites for Advanced Subsea Products Used in Oil/ Gas Applications
Fawad Inam, Maureen Okolo, United Kingdom
17-206 Study of Electric Arc Welding of 7075 Aluminum Alloy Ali Dad Chandio, Bilal Ahmed, Bilal Ansari, Sarah M, Anab, Pakistan
37
17-207 Synthesis, Characterization and Analytical Applications of Copper (II), Cobalt (II) and Mercury (II) Ion Imprinted Polymers
Behisht Ara, Pakistan
17-209 To Study the Comparison of WC-Co-Cr and T400 Tribaloy Cermet Coatings Using HVOF
Yumna Javaid, Abdul Mateen, Irum Kalsoom, Sidra Younas Khan, Pakistan
17-210 Effect of Ag, In and AgIn Alloying Additions on Microstructure and Texture of Mg-3Al-1Zn Alloy During Multi-Pass Warm Rolling
Javed Kamran, B. A. Hasan, N. H. Tariq, Pakistan
17-212 Corrosion Resistance Evaluation of Cold Galvanized Mild Steel Pipe for Soil and Marine Applications
Jawad Ahmad, Hamza Ayyub, Asma Salman, Ameeq Farooq, Umar Manzoor, Pakistan
17-214 Optimization and Characterization of Porous Scaffold of Hydroxyapatite Derived from Egg Shells and in Vitro Study in SBF
Farzana Habib, Shahzad Alam, Muhammad Irfan, Sumaira Nosheen, Waqas Iqbal, Pakistan
17-216 Design Fabrication & Characterization of Titanium Nickel Based Bio-Medical Implants.
Nabeel Bacha Haqani, Muneeb Ahmeb, Muhammad Asadullah Ahmad, Muhammad Imran Khan, Pakistan
17-217 Structural and Electrical Properties of Composite and Compound of MMO Nanoparticles.
Omer Farooq, Fatima-tuz-Zahra, M. Anis-ur-Rehman, Pakistan
17-218 Simple Colorimetric Determination of Arsenic in Aqueous Solutions Using Aspirin Derived Gold Nanoparticles
Safia Sanam, Pakistan
38
17-219 A Laser Scribed Graphene Oxide and Polyimide Hybrid Strain Sensor
Shayan Naveed, Tayyaba Malik, Muhammad Munir, Mohammad Ali Mohammad, Pakistan
17-220 Mechanically Induced Structural Effects in Austenitic Stainless Steel
Abubakar, M. Mudassar Rauf, Muhammad Mansoor, Shaheed Khan, Pakistan
17-221 Optimization of Printing Parameters for Polylactic Acid Material Using 3D Printer
Roydad Khan, Syed Waqar Ahmed, Taqi Ahmad Cheema, Ghulam Hussain, Iftikhar Ahmad, Pakistan
17-222 Effect of Structural Modification on Corrosion Behavior of LM9
Muhammad Kamran, Qadeer Ahmed, Muhammad Mansoor, Pakistan
17-223 Improving the Mechanical and Thermal Properties of Phenol Formaldehyde Nanocomposites by Incorporating 3-Aminopropyltrimethoxysilane Functionalized Graphene Oxide Nanosheets.
Fahd Jamshaid, Sadia Sagar Iqbal, Adnan Ahmad, Muhammad Adrees, Tahir Jamil, Pakistan
17-225 Critical Behavior and Magnetic Transition in Nd1-XSrxMnO3 Khalil A. ZIq, M. Kh. Hamad, Saudi Arabia
17-226 Plasmon Effect Nano- Structures of Inorganic Polycrystalline Materials (ZnS, CdTe, CdS) by Embedding Different Metallic Nano Particles (Ag, Au, Cu) for Improving Photovoltaic Efficiency in Photovoltai
Sohaib Akram, Pakistan
17-228 Discussion on Effect of Different Parameters on Electro-Spun Flux Based on SnO2/PVP Solution.
Maham Akhlaq, Pakistan
39
17-229 Influence of Carbon Nanotubes on the Interlaminar Properties of Carbon Fiber Aluminum Metal Laminates
Madni Shifa Ullah Khan, Fawad Tariq, Rasheed Ahmed Baloch, Pakistan
17-231 Graphene Based Sensors for Acephate Detection Urooj Iqbal, Pakistan
17-232 High-Capacity Nano-Sized V2O5 as a Cathode Material for Na-Ion Batteries
Ghulam Ali, Kyung Yoon Chung, South Korea
17-233 Carbonization of Electro-Spun Polymer Nanofibers Afza Shahid, Mazhar Mehmood, Pakistan
17-234 Effect of Bonding Agent Concentration and Oxidizer Filler Size Ratio on Mechanical and Ballistic Properties of Composite Solid Propellant (HTPB/TDI) System
Bibi Meraj, Tanver Abbas, Liaquat Ali, Syed Wilayat Husain, Pakistan
17-235 Titania Anchored Graphene Oxide Nanocomposites for Solar Disinfection (SODIS)
Anam Anwar Ali Safri, Syed Wilayat Hussain Shah, Saima Shabbir, Pakistan
17-236 Antimicrobial Water Disinfection Using Polymer Titania Hybrids
Anam Anwar Ali Safri, Syed Wilayat Husain, Saima Shabbir, Pakistan
17-237 Surface Degradation Studies of Nanostructured Magnesium Tested in Simulated Body Fluid
Anum Sana, Iqra Malik, Muhammad Mujahid, Aftab Akram, Adeel Umer, Pakistan
17-239 Design and Development of Narrow Band Pass Filter Kamal Ahmed, Pakistan
17-240 Development of Copper-Teflon Composite Material Abdul Rauf, Pakistan
40
17-242 Effect of Ni-Cr Thin Films on the Electrochemical Behavior of AISI-1045 Steel: A Potentiodynamic Polarisation Study
Ali Dad Chandio, Syed Muhammad Kumail Haider, Hamza Zahid, Pakistan
17-245 Processing, Characterisation and Application of Graphene Ali Dad Chandio, Kanwal Zehra, Arooba Rasheed,
Humair Ahmed Siddiqui, Pakistan 17-246 Study of the Cracks in Maraging Steel During the Gas
Tungsten Arc Welding Process Ali Dad Chandio, Bilal Ahmed, Muhammad Irtaza,
Muhammad Saqib Hussain, Anas Manzoor, Pakistan 17-248 Microstructural and Failure Study of Two Dissimilar Steels
Welded by Spot Welding Technique Ali Dad Chandio, Nabeel A. Khan, Rameez Jawaid, S. Naqi Mohsin,
Pakistan 17-249 Thermally Activated Flux Flow in FexSe0.5Te0.5
Superconducting Single Crystal Khalil A. ZIq, R M Hamad, T S Kayed, Pakistan
17-250 Design and Experimentation of Laser Beam Collimator with Controllable Beam Divergence
Muhammad Siddique, Samia Qazi, Faisal Nasim, Abdul Rauf, Pakistan
17-251 Anisotropic Effects in Wood Kinza Hassan, Saman Kiran, Muhammad Shabir Mahr,
Muhammad Tayyab , Pakistan 17-252 Comparative Study of Rear Side Reflection for Silicon Nano
Particles, Deposited on Aluminum Metalized Plan Crystalline Silicon and Texture Wafers
Hira Rehman, Pakistan
17-253 Design and Fabrication of a 3-Axis CNC Precision Router Muhammad Shoaib Butt, Saad Ali, Muhammad Ismail Leghari,
Sarmad Ishfaq, Pakistan
41
17-255 The Electrochemical Characterization of AlTiN Coating in Artificial Body Fluid
Nawal Ali, Hamna, Hafsa Zafar, Pakistan
17-256 Effect of Heat Treatment on Tribological Characteristics of Nickel Aluminum Bronze
Kamran Yaseen, Muhammad Mansoor, Pakistan
17-257 Actuation Properties of Shape Memory Polymer Composite at Lower Temperature with Dual Programming
Abdul Basit, Pakistan
17-259 Friction Stir Welding of Austenitic Stainless Steel; a Study on Microstructure and Mechanical Properties
Talha Ahmed, M.B.Bhatty, Hamid Zaigham, Rizwan Khan, Pakistan
17-260 Friction Stir Welding of Dissimilar AA2024 and AA 6061 Aluminium Alloys
Rizwan Khan, M.B.Bhatty, Hamid Zaigham, Farooq Iqbal, Pakistan
17-261 Graphene Based Sensors for the Detection of an Organophosphorus Compound
Huma Khizar, Habib Nasir, Pakistan
17-262 Removal of Acid Red 1from Industrial Wastewater by Sugarcane Bagasse Modified Biocomposites: a Green Approach
Uerooj Kamran, Haq Nawaz Bhatti, Saima Noreen, Pakistan
17-263 Efficient Reduction of Aromatic Compounds with Aluminium
Hadia Zahoor, Pakistan
17-264 Photocatalytic Degradation Studies with Co-Doped Titanium Dioxide Nanotubes and Graphene Oxide Nanocomposite
Tanzeela Akram, Pakistan
42
17-265 Synthesis, Spectroscopic Characterization and Biological Applications of Novel Zinc Complexes with Schiff Bases
Mehrine Rehman, Pakistan
17-267 Thermal Analysis and Numerical Modeling of Form-Stabilized Paraffin/EG Composites for Application in Battery Thermal Management Systems
Gulfam Raza, Yuan Deng, Naveed Akthar, Pakistan
17-268 Electrochemical Study of 316L Stainless Steel Produced by Power Metallurgy Method in Simulated Body Fluid.
Tayyaba Amjad, Sehar Iftikhar, Adina Saeed, Warda Tus Sahar, Pakistan
17-269 The Study of Electrochemical Behavior of TiN Coated Stainless Steel in Artificial Body Fluid
Hamna Sajjad, Pakistan
17-270 Influence of Warm Working on Quality of Low Alloy Steel Muhammad Farooq Iqbal, Haider Ali Ansari, Muhammad Rizwan Khan,
M. B. Bhatty, Pakistan 17-271 Optimization of Spot Welding Parameters in Similar and
Dissimilar Alloys AISI-321 M. Mudassar Rauf, A.Nusair Khan, I. Salam, R. Qayyume, S. Khan,
Pakistan 17-272 Synthesis and Fabrication of Functionalized Reduced
Graphene Oxide Based Sensors for Detection of Nitroaromatic Compounds
Habiba Muneer, Pakistan
17-274 Influence of Cold Working on the Quality of Stainless Steel 304
Haider Ali Ansari, Muhammad Farooq Iqbal, M. B. Bhatty, Pakistan
43
17-275 An Investigation of Rheological Behaviour of Lubricating Oils Used for Motor Bike Engines
Shahzad Maqsood Khan, Saba Zia, Saira Bano, Nafisa Gull, Atif Islam, Sadia Sagar Iqbal, Muhammad Abid, Sehrish Jabeen, Muhammad Taqi Zahid Butt, Tahir Jamil, Pakistan
17-276 Preparation and Characterization of Copper - Molybdenum Composite via Powder Metallurgy Technique
Omayma Elkady, Hazem whman, Adel Fathy, Ahmed Abu-Oqail, Egypt
17-278 Sulfate Vanadate Hot Corrosion Behavior of Double Ceramic Layered CaZrO3 /Yttria Stabilized Zirconia (YSZ) Coatings
Noveed Ejaz, Liaqat Ali, Furqan ahmed, Gul Hameed, Khalid Mehmood Ghauri, Aamer Nusiar Khan, Pakistan
17-282 Determination of Elastic Modulus Using Atomic Force Microscope
Muhammad Mansoor, Muhammad Shaheed, Sabah Zaman, Pakistan
17-283 Failure Study of Thick-Walled Cylinder Subjected to Autofrettage
Liaqat Ali, Khalid Mehmood, S.A. Rizvi, I. Salam, S. Khan, Pakistan
17-284 Effect of Forging Ratio on the Mechanical Properties of the High Strength Low Alloy Steel (HSLA)
Liaqat Ali, Khalid Mehmood, S.A. Rizvi, I. Salam, S. Khan, Pakistan
17-285 Failure Analysis of a Forged Steel Block Khalid Mehmood, Liaqat Ali, S.A. Rizvi, I. Salam, S. Khan, Pakistan
17-288 Development of Immersion Heater for Oil Refinery Using Alumina Ceramic Beads for Insulation
Anjum Shahzad, Ali Haider, Saleem Akhtar, Pakistan
17-289 Engineered Cementitious Ultra High Performance Composite (ECUHPC)
Ghulam Mohammad Wajhee Abuabakar Sadeqeen, Fatima Zahid, Farzam Ahmed, Pakistan
44
17-290 Development of High Coercivity Fe-Co-Al-Ni-Ti-Cu-Nb Permanent Magnet Through Casing Technique
Z. Ahmad, M. Farooque, A. Haider, A, Nusair Khan, S. Akhtar, Pakistan
17-291 Development of Iron-Cobalt Based Sintered Magnet Through Strip Casting Process
Rana Usman Hamid, Ali Haider, Zubair Ahmad, Saleem Akhtar, Pakistan
17-292 Effect of Partial Pressure on Titanium Aluminide Coatings A, Nusair Khan, M.N. Sarwar, R.U. Hamid, S. Akhtar, Pakistan
17-294 Optimization of C-Axis Oriented AlN Thin Films and Fabrication of Contour- Extensional Mode Resonators
Shahid Imran, Yungui Ma, Sailing He, Pakistan
17-295 Extraction of La and Nd Oxides with D2EHPA by Solvent Extraction Cascade
Adnan Munir, Sajjad Ahmad, Muhammad Imran Khan, M. Rizwan Maqsood, Pakistan
17-297 Acid Leaching Parametric Study for the Extraction of Rare Earth Elements from Chevkinite Minerals
Sajjad Ahmad, M. Rizwan Maqsood, Muhammad Imran Khan, Adnan Munir, Saleem Akhtar, Pakistan
17-298 Reinforcement of Electromagnetic Wave Absorption Characteristics in PVDF-PMMA Nanocomposite by Intercalation of Carbon Nanofibers
Muhammad Raffi, Anam Naseer, Sabih D. Khan, Shaista Shahzada, Pakistan
17-300 Synthesis of Bonded Magnets Produced through Compression
Asif Ali, Ali Haider, Zubair Ahmed, Pakistan
45
17-301 Thermo-Optical Characterization of Heterogeneous Structures of Thin TiO2-Al2O3 Bi-Layer Films Grown by Atomic Layer Deposition (ALD)
Muhammad Rizwan Saleem, Rizwan Ali, Seppo Honkanen, Pakistan
17-303 Antifouling Characteristics and Performance of PES Membranes Incorporated with Organic Antimicrobial Agents.
Madiha Noreen, Manahil Ali, Hashma Khalid, Nasir M. Ahmed, Pakistan
17-304 Ablative Damage Tolerance of Carbon Fiber Reinforced Phenolic Composites Containing Graphene Nano Platelets and Graphite Powder
A. Shaheryar, H. Qaiser, T. Subhani, Pakistan
17-305 Effect of Refining Processes on Alloy Structure and Properties: A Review
H. Qaiser, A. Usman, S. S. Hussain, I. Salam, S. Khan, Pakistan
17-308 Well Patterned Three-Dimensional (3D) Nano-Structure Arrays for Device Applications
Ghulam Nabi, Ahmad Al-Hadad, M. Bilal Tahir, Waheed S. Khan, Yong Lei, M. Rafiq, Tahir Iqbal Awan, Abdul Majid, Muhammad Rizwan, Pakistan
17-311 Development of Electrospun Nanofiber Incorporated Facemask and Study of Its Performance and Comfort Properties
Ahsan Nazir, Zulfiqar Ali, Muhammad Bilal Qadir, Zubair Khaliq, Abdul Jabbar, Ali Afzal, Pakistan
17-312 Extrusion Die Design for Composite Filament Fabrication: Part A
Ali Afzal, Zulfiqar Ali, Muhammad Bilal Qadir, Zubair Khaliq, Abdul Jabbar, Jean Yves Drean, Ahsan Nazir, Pakistan
46
17-313 Synthesis of Nano-Crystalline Cph-Nd2O3 powder from Elemental Neodymium
Noveed Ejaz, Liaqat Ali, Furqan ahmed, Khalid Mehmood Ghauri, Muhammad Mansoor Malik, Khalid Mehmood, Pakistan
17-314 Physical Properties Measurement of Advanced TBC Materials with Pyrochlores and Perovskite Structures
Noveed Ejaz, Liaqat Ali, Furqan ahmed, Muhammad Mansoor Malik, Khalid Mehmood Ghauri, Khalid Mehmood, Pakistan
17-315 A Case Study on Twisting of the Tail Rotor Shaft of a Helicopter
Muhammad Shahzad, Ammad H Qureshi, Pakistan
17-316 Structural, Morphological and Mechanical Properties of Laser Irradiated CaHPO4 Biomaterial
Imtiaz Ullah Khawaja, Aamir Rasheed, Sumaira Liaqat, Muhamad Farooq, Muhammad Azhar Khan, Pakistan
17-317 Enhanced Thermoelectric Figure of Merit in P-Type SnS0.2Se0.8 Solid Solution Doped with Ag
Asfandiyar, China
17-318 The Unusual Viscosity Behavior of Cellulose Solutions in N,N-Dimethylacetamide and Lithium Chloride
Zubair Khaliq, Z. A. Rehan, Abdul Jabbar, Ahsan Nazir, Zulfiqar Ali, Ali Afzal, M. Bilal Qadir, Pakistan
17-320 Aging Behavior and Electric Field Induced Instabilities in Lead Magnesium Niobate; Titanate Relaxor Ferroelectric Single Crystal
Ghulam Shabbir, Naeem Mustafa, Pakistan
17-321 Comparative Study of Influence of Anions on Thermal Behavior
Fadia, Pakistan
47
17-322 Comparative Study of Influence of Anion on Microstructural Development and Sintering of Nanosized Alumina
Fadia, Pakistan
17-328 Damage and Failure Analysis of Critical Aerospace and Aircraft Structures under High Velocity Impact Applications Through Material Constitutive and Finite Element Modeling
Uzair Ahmed Dar, Pakistan
17-330 Studying the Multi-Disciplinary Impact of Carbon Nanotubes on Polymer Based Fiber/ Fabric Reinforced Epoxy Nanocomposites and Biomedical Systems
Shahid Nisar Ahmad, Sadaf Saeed, Abdul Matin, Pakistan
17-331 Impact of Nanofiller Addition on Thermal and Ablative Properties of Carbon Fabric Reinforced Phenolic Nanocomposites
Shahid Nisar Ahmad, Bahroz Rashid, Bilal Khan, Muhammad Rowais, Pakistan
17-332 Synthesis of Carbon Nanotubes in a Fluidized Bed Reactor: Optimization of Different Growth Parameters
Bahroz Rashid, Shahid Nisar Ahmad, Ghulam Mohy Uddin, Nasir Ashraf, Pakistan
17-334 Study of Defects in Radiation Exposed Graphene by Raman Spectroscopy
Nasir Ashraf, Awais Ali, Shahid Nisar Ahmad, Ishaq Ahmad, Shamaila Karamat, Arshad Saleem Bhatti, Pakistan
17-335 Magnetic Materials: from Fundamentals to Applications Sadia Manzoor, Pakistan
17-336 Modified CaO Catalyzed Heterogeneous Synthesis of 5-(furan-2-Yl)-3-Phenyl-Isoxazole
Yanqing Miao, Yan Xin, Gu Xuefan, Zhang Zhifang, Tang Ying, China
48
17-337 Structural and Dielectric Properties of Co-Sm Substituted Nickel Ferrite Nanopaticles Synthesized by Sol-Gel Method
Ghulam Asghar, Maryam Riaz, M Anis-ur-Rehman, Syed Nasir Khusro, Saifullah Awan, Ghulam Hasnain Tariq, Faiza Shabir, Pakistan
17-339 Structural, Magnetic and Dielectric Studies of Doped M-Type Strontium Hexa-Ferrite Synthesized by Co-Precipitation Method
Ghulam Asghar, Syed Nasir Khusro, M Anis-ur-Rehamn, Saifullah Awan, Ghulam Hasnain Tariq, Pakistan
17-340 Effect of Surface Modification on Microwave Absorption Properties
Muhammad Salman, Anwaar illahi, S. wilayat Husain, Pakistan
17-341 Thermo-Mechanical Analysis of the Exhaust Valves from a Natural Dedicated Heavy Duty I.C Engine
Muhammad Arsalan Khan, Abdul Shakoor, Imran Khan, Pakistan
17-344 Synthesis and Characterization of ZnO-RGO Nano-Composite, Pakistan
Fayaz, Talha Hussain, Muhammad Yousuf Anwer, Muhammad Hassaan, Pakistan
17-345 Piezoelectric, Dielectric Studies of Poled Nb5+ Doped PZT Near Morphotropic Phase Boundary
Muhammad Waleed, Muhammad Naeem, Narjis Begum, Ibrahim Qazi, Pakistan
17-346 Synthesis and Characterization of Nd-Substituted Lithium Nickel Nano Ferrites
Nida Zahra, Naseem Abbas, Muhammad Aon Ali, Pakistan
17-347 Effect of Concentration of Surfactant on the Exfoliation of Graphite to Graphene in Aqueous Media
Muhammad Ayub, Khalid Nawaz, Pakistan
49
17-348 Sodium Carboxymethylcellulose: a Novel, Ecofriendly and Water Soluble Binder for High Performance GO-PANI Composites Electrode Material
Muhammad Fahim, Irum Firdous, Anwar-ul-Haq Ali Shah, Salma Bilal, Pakistan
17:15 Ice Cream
50
Workshop on Magnetic Materials (Conference Hall – NINVAST)
Thursday, October 19, 2017 Time 08:00-16:15 8:00-9:00 Registration
9:00-9:20 Inaugural Ceremony Session-I
Chairperson: Anwar ul Haq 9:20-9:50 Magnetic Materials: From Fundamental to Application
Sadia Manzoor, Pakistan 9:50-10:20 Research on the High Coercivity in Sm2Co17 Permanent Magnets and
its Microstructure Zhang Pengyue, China
10:20-10:45 Extraction of Rare Earth Elements from Chevkinite Minerals Sajjad Ahmed, Pakistan
10:45-11:00 Refreshment Session-II
Chairperson: Shaheed Khan 11:00-11:35 Improving the Performance of RE2Fe14B Based Sintered Magnets
Containing a High Concentration of the Abundant Rare Earth Elements Caiyin You, China
11:35-12:05 Recent Development & Progress in Fe-Ni-Co-Al Based Magnets Anwar ul Haq, Pakistan
12:05-12:40 Study on Preparation and Magnetic Properties of MnBi Alloy Zhang Pengyue, China
12:40-14:00 Lunch & Prayer Break 14:00-15:40 Practical Demonstration of Processing & Characterization of
Magnetic Materials
15:40-16:15 Closing Ceremony & Refreshment
51
Session-27 (Lecture Room No. 1) Friday, October 20, 2017 Time 09:00-10:40
Chairperson: Shaheed Khan & Waseem Haider
09:00 17-124 KN Synthesis of Sandwich Microstructured Expanded Graphite/Barium Ferrite Connected with Carbon Nanotube Composite and Its Electromagnetic Wave Absorbing Properties
Tingkai Zhao, Muhammad khan, Wenbo Jin, Wenbo Yang, Tiehu Li, China
09:40 17-14 KN Improving the Performance of RE2Fe14B Based Sintered Magnets Containing a High Concentration of the Abundant Rare Earth Elements
Caiyin You, China
10:20 17-5 Lattice Twinning and Martensite Variant Formation in Shape Memory Alloys
Osman Adiguzel, Turkey
10:40-11:00 Tea Break
Session-28 (Lecture Room No. 1) Friday, October 20, 2017 Time 11:00-12:40 Chairperson: Wilayat Hussain & Su Jun Wu
11:00 17-277 KN Conversion of the Metallurgical Slag Into Ceramic Foam as a New Feedstock for Industrial Applications
Emad Mohamed M. Ewais, Egypt
11:40 17-13 KN Combinatorial Development of Metallic Thin Films for Next-Generation Advanced Materials
Waseem Haider, USA
52
12:20 17-241 Rheological, Structural and Mechanical Characteristics of Sponge EPDM / SBR Blended Nano Composites
M. Arshad Bashir, Raja Haseeb Ahmed, Waheed Gul, Pakistan
12:40-14:00 Lunch & Prayer Break
Session-29 (Lecture Room No. 2) Friday, October 20, 2017 Time 11:00-12:40
Chairperson: Anjum Tauqir & Seung Soo Hong
11:00 17-333 Synthesis, Characterization, and Testing of Ni/Cu Alloy Nanoparticles in A.C. Magnetic Field for Magnetic Hyperthermia Applications
Shahid Nisar Ahmad, Hamid Khan, M. Yaqoob Khattak, Khawar Shoaib, Pakistan
11:20 17-23 A Study of Direct Chill Cast AA 6061 Alloy to Optimize Homogenization Cycle
Muhammad Arfan, Pakistan
11:40 17-215 K0.5Na0.5NbO3 Based Ceramics - Alternative to Lead Based Piezoelectric Ceramics
Muhammad Asif Rafiq, Maria Elisabete Costa, Paula Maria Vilarinho, Pakistan
12:00 17-51 Evaluation of Silver Nanowires as an Agent to Produce Conductive Asphalt Concrete and Its Comparison with Traditionally Obtained Conductive Concrete
Hafiza Hanfa Fazal, Pakistan
12:20 17-157 Effect of Particle Size, Composition and Sintering Cycle on Alumina-Quartz Ceramics for Development of High Quality Crucibles
Wagan Aamir, Fayyaz Hussain, Muhammad Sohail, Pakistan
12:40-14:00 Lunch & Prayer Break
53
Session-30 (Lecture Room No. 3) Friday, October 20, 2017 Time 11:00-12:40
Chairperson: Akhlaq Ahmed & Paula M. Vilarinho
11:00 17-350 Facile Synthesis of 3D Hierarchical MnO2 Microspheres and 2D Layered NiCo2O4 Nanosheets: Fabrication of Novel Solid State Asymmetric Supercapacitor Device (NiCo2O4 /MnO2)
Khalid Mehmood, Pakistan
11:20 17-310 Mechanical Behavior of Nanocellulose Coated Jute/Green Epoxy Composites
Abdul Jabbar, Ali Afzal, Ahsan Nazir, Zubair Khaliq, Muhammad Bilal Qadir, Zulfiqar Ali, Pakistan
11:40 17-273 Co-MOF-71/GO Composites as Better Electroccatalyst Rimsha Mehek, Pakistan
12:00 17-176 Adsorptive Removal of Nitenpyram from Aqueous Media Using Polymeric Biocomposite
Haq Nawaz Bhatti, Rabia Asghar, Saima Noreen, Muhammad Zahid, Pakistan
12:20 17-177 Catalyst Materials for Proton Exchange Membrane Fuel Cells Mujahid Wasim Durani, Saim Saher, Pakistan
12:40-14:00 Lunch & Prayer Break
54
Annexure Lecture Room No: 1 [Nano Materials] Subject Experts Fazal A. Khalid Chairperson Yuan Deng Olfa Khemakhem Jing-Feng Li Zulfiqar Khan P.Pashaei Emad Mohamed M. Ewais Sher Bahadar Khan
Lecture Room No: 2 [Ceramics & Coatings] Syed Wilayat Hussain Chairperson Paula M. Vilarinho Myong Ho Kim Tae Kwon Song Sharafat Ali Ihab A Abdel-Latif Maria Elizabete Costa