Wasp Barcode Technologies1400 10th StreetPlano, TX 75074Telephone: 866-547-9277Fax: 214-547-4101

©2018 Wasp Barcode Technologies. • ALL RIGHTS RESERVED. •An Unpublished Work - All rights reserved. No part of the contents of thisdocumentation or the procedures described therein may be reproduced ortransmitted in any form or by any means without prior written permissionof Wasp Barcode Technologies or its subsidiaries or affiliates ("Wasp").Owners of Wasp products are hereby granted a non-exclusive, revocablelicense to reproduce and transmit this documentation for the purchaser'sown internal business purposes. Purchaser shall not remove or alter anyproprietary notices, including copyright notices, contained in thisdocumentation and shall ensure that all notices appear on anyreproductions of the documentation. Should future revisions of thismanual be published, you can acquire printed versions by contacting yourWasp representative.Electronic versions may either be downloadable from the Wasp BarcodeTechnologies website (www.waspbarcode.com) or provided on appropriatemedia. If you visit our website and would like to make comments orsuggestions about this or other Wasp publications, please let us know viathe "Contact" page.

DisclaimerWasp Barcode Technologies ("Wasp") reserves all rights with respect to itstrademarks, service marks, logos, and other indicia ("Marks"). Anyunauthorized use of any Wasp-owned Mark, or any use of a mark that isconfusingly similar to, or likely to cause confusion with, an Wasp-ownedMark, would constitute infringement of Wasp’s exclusive trademark rights.Logo of Wasp and Wasp "bug" are registered trademarks.WDT90 and the WDT90 logo are registered trademarks of Wasp BarcodeTechnologies.All other brand and product names mentioned herein are for identificationpurposes only and may be trademarks or registered trademarks of theirrespective owners.

PatentsSee the Safety & Regulatory Addendum for patent list.

WDT92Rugged Mobile Computer with 1D/2D Imager

Quick Start Guide

822002730 (Rev. A) Oct. 2018

Out of the BoxThe WDT92 package contains: • WDT92 mobile computer• Rechargeable battery pack • Terminal emulation overlay• Belt clip (handheld models only)• Belt clip pivot (handheld models only)• Hand-strap• Lanyard (for pistol grip models only)• Quick Start Guide• Safety & Regulatory Addendum• Wavelink Avalanche Insert • Wavelink Terminal Emulation insert • End User License Agreement (EULA) Sheet

Remove all the components from their packaging; check their integrity andcompare them with all the packing documents.

General View

CAUTION

Keep the original packaging for use when sending products to thetechnical assistance center. Damage caused by improper packagingis not covered under the warranty.

Front View Back View

Top View Bottom View

ON/OFF Power Key

LEDs

Receiver Speaker

Color Display

Front Scan Key

Keyboard

Laser Safety Label

Micro USB Connector

LoudspeakerTrigger Button

(for use with the optional pistol

trigger)Product Label

Reset Key

MicroSD Card Slot

Data Capture Window HandyLink™ connector (host/device)

KeypadAlphanumeric Keypad (38 Keys)

1. Function Keys 2. Scan Key3. Orange Modifier4. Blue Modifier

Special Function Icons

After a Blue modifier key press, the Start menu key opens the Start menu.

After a Blue modifier key press, the File Manager key opens the file manager.

After a Blue modifier key press, the Backlight key turns the backlight on and off.

After a Blue modifier key press, the Lock key locks the keyboard.

After a Blue modifier key press, the blue arrows allow moving forwards or backwards within the Internet Explorer browser pages.

1

4

2

3

See the Safety & Regulatory Addendum included with yourproduct for additional regulatory, safety and legalinformation.

©2018 Wasp Barcode Technologies. All rights reserved.Logo of Wasp and Wasp "bug" are registered trademarks.

www.waspbarcode.com

Reference DocumentationFor further information regarding WDT92 refer to the SDK Help on-line andto the WDT92 User’s Manual.

Support Through the WebsiteWASP provides several services as well as technical support through itswebsite.Please check our website at www.waspbarcode.com under Support &Training and click on the links indicated for further information including:

• Online Support Center

• Updates & Patches

• Warranty Claims

• Product Tutorials.

Warranty Terms and ConditionsThe warranty period is 1 year for the device and 90 days for consumables(e.g. battery, power supply, cable etc.) from date of purchase at ourcompany.

Battery InstallationInsert the battery's alignment lugs into the recesses, then press firmlyuntil the battery latch clicks twice:

Charging InstructionsThe battery pack is not initially fully charged. After installing the battery,charge it with the USB cable or with the single dock.

Charge with USBYou can use a standard micro USB to USB cable in conjunction with apower supply adapter to charge the WDT92 from a power outlet.

Charge with the Single Slot Dock

NOTE

Use only a Datalogic approved power supply.

CAUTION

Don’t insert the wall charger into the micro USB port when theWDT92 is inserted into the dock.

SD Card Installation1. Turn off the WDT92 (press the power key and waiting for device power-

off).2. Pull the battery latch down and remove the battery pack:

3. Shift the cardholder upwards and then pull it up:

4. Insert the microSD card with the written part upward:

5. Lock the card into place by pushing the cardholder down and then shifting it downwards:

6. Insert the battery's alignment lugs into the recesses, then press firmly until the battery latch clicks twice:

Synchronise your Device with the PCSet up Synchronisation using Windows Mobile® Device CenterWindows Mobile® Device Center can be downloaded from Microsoftwebsite www.microsoft.com. It is only compatible with Windows Vistaand Windows 7; if you run Windows XP or earlier, you have to downloadMicrosoft ActiveSync.You can establish a connection to your WDT92 through the followinginterfaces:• USB either directly or through the Single Dock• RS232 either directly or through the Single Dock• Bluetooth® To establish a partnership between the WDT92 and a host PC, startWindows Mobile® Device Center and follow the steps below:1. Connect the WDT92 to the host PC. Windows Mobile® Device Center

configures itself and then opens.2. On the license agreement screen, click Accept.3. On the Windows Mobile® Device Center’s Home screen, click Set up

your device.4. Select the information types that you want to synchronize, then click

Next.5. Enter a device name and click Set Up.When you finish the setup wizard, Windows Mobile® Device Centersynchronizes the mobile computer automatically. Microsoft® OfficeOutlook® emails and other information will appear on your device aftersynchronization.

USB Direct Connection

USB HandyLink™ Connection

Scanning and Imaging1D Imager Data Capture

2D Imager Data Capture

Aiming System Pattern

The following information applies to Laser Aiming System, used on WDT92variants with 2D Imager:

Linear Bar Code 2D Matrix Symbol