owner’s guide nv22ukl - lakeland · your shark® navigator upright is easy to assemble: 1 lay...

9
Owner’s Guide NV22UKL NV22UKL_26_IB_110314_2.indd 1 11-03-15 11:00 AM

Upload: others

Post on 21-Aug-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Owner’s Guide NV22UKL - Lakeland · Your Shark® Navigator Upright is easy to assemble: 1 Lay your vacuum body on a level surface. 2 Slide the electrical connection from the power

Owner’s GuideNV22UKL

NV22UKL_26_IB_110314_2.indd 1 11-03-15 11:00 AM

Page 2: Owner’s Guide NV22UKL - Lakeland · Your Shark® Navigator Upright is easy to assemble: 1 Lay your vacuum body on a level surface. 2 Slide the electrical connection from the power

www.lakeland.co.uk 1

Contents

Important Safety Instructions 2

Getting Started 4

Using the Vacuum 6

Cleaning with the Vacuum Accessories 7

Emptying the Dust Cup Assembly 8

Proper Care of Your Vacuum 9

Troubleshooting 10

Checking for Blockages 11

Maintenance 12

ThankyouforpurchasingtheShark®NavigatorUprightVacuum.

This manual covers model:

NV22UKL 26

TECHNICAL SPECIFICATIONS

Voltage: 220/240 V., 50Hz

Watts: 1200W

This appliance complies with the WEEE-Directive 2002/96/EC on the disposal of electrical and electronic equipment (WEEE).

This appliance complies with the European directives for electromagnetic compatibility (EMC) 2004/108/EC and its revisions, as well as Low Voltage Directive (LVD) 2006/95/EC and its revisions.

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material sources. To return your used device, please use the return and collection systems or contact the retailer where this product was purchased. They can take this product for environmental safe recycling.

Not to be disposedof with other

household waste.

NV22UKL_26_IB_110314_2.indd 2-1 11-03-15 11:00 AM

Page 3: Owner’s Guide NV22UKL - Lakeland · Your Shark® Navigator Upright is easy to assemble: 1 Lay your vacuum body on a level surface. 2 Slide the electrical connection from the power

2 www.lakeland.co.uk 3

WARNING:TO REDUCE THE RISK OF ELECTRIC SHOCK OR INJURY DO NOT USE OUTDOORS OR ON WET SURFACES.

WHEN USING YOUR SHARK® NAVIGATOR UPRIGHT VACUUM, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING YOUR SHARK® NAVIGATOR UPRIGHT VACUUM.

IMPORTANT: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

IMPORTANT SAFETY INSTRUCTIONSSAVE THESE INSTRUCTIONSFor Household Use Only

GENERAL USE:

16. Useonlyasdescribedinthismanual.

17. Childrenshouldbesurpervisedtoensurethattheydonotplaywiththeappliance.

18. DO NOTputanyobjectsintoopenings.

19. Keepyourworkareawelllit.

20. Keepthevacuummovingoverthecarpetsurfaceatalltimestoavoiddamagingthecarpetfibers.

21. DO NOTplacevacuumonunstablesurfacessuchaschairsortables.

22. DO NOTallowyoungchildrentooperatethevacuumoruseasatoy.

23. DO NOTusevacuumcleanerifithasbeendropped,damaged,leftoutdoorsorsubmergedinwater.

24. Ifthesupplycordisdamaged,itmustbereplacedbyaqualifiedpersoninordertoavoidahazard.

CYCLONIC CHAMBER/DUST CUP/FILTERS:

25.Beforeturningonthevacuum:

• Makesurethatdustcup,cyclonicchamberandallfiltersareinplaceafterroutinemaintenance.

• Makesurethatallcomponentsandfiltersarethoroughlydryafterroutinecleaning.

• Onlyusefiltersandaccessoriesprovidedbythemanufacturer.[Failuretodosowillvoidthewarranty].

GENERAL ELECTRICAL SAFETY:

1. Unplugfromelectricaloutletwhennotinuseandbeforeservicing.

2. DO NOTusevacuumwithadamagedcordorplug.

3. DO NOT pullorcarryvacuumbythecord.

4. DO NOTunplugbypullingoncord;tounplug,grasptheplug,notthecord.

5. DO NOThandleplugorvacuumcleanerwithwethands.

6. DO NOTrunthevacuumoverthepowercord.

7. DO NOTcloseadooronthecord.

8. DO NOTpullcordaroundsharpcorners.

9. DO NOT leaveappliancewhenpluggedin.

10. Keeppowercordawayfromheatedsurfaces.

11. Turnoffallcontrolsbeforepluggingorunpluggingvacuumcleaner.

HOSE ATTACHMENTS:

12. DO NOT useifairflowisrestricted;iftheairpaths,thehoseortheextensiontubebecomeblocked,turnthevacuumcleaneroff.Removeallobstructionsbeforeyouturnontheunitagain.

13. Keeptheendofthehose,wandsandotheropeningsawayfromfaceandbody.

14. Keeprotatingbrushandsuctionopeningsawayfromhair,face,fingers,uncoveredfeetorlooseclothing.

15. Onlyusemanufacturer’srecommendedattachments.

GENERAL CLEANING:

26.DO NOTrunthevacuumoverlarge-sizedobjects.

27. DO NOTpickuphardorsharpobjectssuchasglass,nails,screwsorcoinsthatcoulddamagethevacuumcleaner.

28.DO NOTpickupsmokingorburningobjectssuchashotcoals,cigarettebuttsormatches.

29. DO NOTpickupflammableorcombustiblematerialssuchaslighterfluid,gasoline,keroseneoruseinareaswheretheymaybepresent.

30. DO NOTpickuptoxicsolutionssuchaschlorinebleach,ammoniaordraincleaner.

31. DO NOTuseinanenclosedspacewherevaporsarepresentfrompaint,paintthinner,moth-proofingsubstances,flammabledustorotherexplosiveortoxicmaterials.

32. DO NOTvacuumupanyliquids.

33. DO NOTimmersevacuumcleanerinwaterorotherliquids.

34.DO NOTuseoutdoorsoronwetsurfaces;useonlyondrysurfaces.

35.Useextracarewhencleaningonstairs.

NV22UKL_26_IB_110314_2.indd 2-3 11-03-15 11:00 AM

Page 4: Owner’s Guide NV22UKL - Lakeland · Your Shark® Navigator Upright is easy to assemble: 1 Lay your vacuum body on a level surface. 2 Slide the electrical connection from the power

4 www.lakeland.co.uk 5

10To carry the vacuum:

Withtheunitinthestandingposition,liftbytheDustCupAssemblyHandle(carryhandle).

CAUTION:Whenliftingorcarrying,DO NOT pressDustCupAssemblyreleasebutton.

Alongwithyouruprightunit,youwillfindthefollowingcomponents:

a HandleAssembly

b CleaningAttachments

c ExtraFilters

d SuperStretchHose

e FloorPowerNozzle

f VacuumBody

g CleaningWand

h PetHairPowerBrush

i 24”CreviceTool

j AccessoryBag(notshown)

Getting Started

c

4

5

37

8 9

2

b

d

Your Shark® Navigator Upright is easy to assemble:

1 Layyourvacuumbodyonalevelsurface.

2 Slidetheelectricalconnectionfromthepowernozzleintothemainbodytoclickintoplace.

3 Connectthehosefromthemainbodytothepowernozzle;pushwithaslightturningmotiontocreateasnugfit.

4 Slidethehandleassemblyintotheuprightunitaligningthehosehookonthehandleassemblywiththepowercordhooksonthebackoftheunit.

5 Securethehandleassemblyinplacewithincludednut/bolt(shippedattachedtohandleassembly).

6 Placethevacuumintheuprightposition.

7 StoretheCreviceTool,DustingBrushandCleaningWandontheunit.

8 AttachtheSuperStretchHose:

a)Snaphoseintoswivelconnector

b)Routeunderanti-tiphook

c)Routeoverupperhoseholder

d)Presssecurelyontocleaningwand

IMPORTANT:Topreventvacuumfromtipping,securehoseundertheanti-tiphosehook.

9 Whenstoringyourvacuum,windcordaroundthetwocordholdersandsecurewithcordclip:

•QuickCordreleaseatthetopoftheunit–placeintheuprightposition.

•Secondholdernearthebase–turnuntilitispointingdown.

Toreleasethecord,turntheQuickCordreleasetotheleftorright.

IMPORTANT:ForsuctiontoreachtheFloorPowerNozzle,theCleaningWandandSuperStretchHosemustbeattachedsecurelyonthevacuumbody.

NV22UKL_26_IB_110314_2.indd 4-5 11-03-15 11:00 AM

Page 5: Owner’s Guide NV22UKL - Lakeland · Your Shark® Navigator Upright is easy to assemble: 1 Lay your vacuum body on a level surface. 2 Slide the electrical connection from the power

6 www.lakeland.co.uk 7

Vacuum Accessories

YourvacuumcomeswithaSuperStretchHoseandCleaningWand.Useoneortheothertoattachyourcleaningaccessories.

1 Using the Super Stretch Hose:

Standthevacuumintouprightposition.

RemovethehosefromtheCleaningWand.

Pushtheselectedtoolintothehoseconnector.

Using the Vacuum Cleaning with the Vacuum Accessories

YourShark®NavigatorUprightVacuumisaversatiletoolthatcanbeusedtocleanbarefloorsurfacesorcarpets–withtheclickofaswitch.

Standthevacuumintotheuprightposition.

Pluginthevacuum.

1 StartwiththePowerSwitchinthe“O Off”position.

2 PlaceyourfootontheFloorPowerNozzleandpullhandletowardsyou.

3 SetthePowerSwitchtodesiredcleaningsetting.

4 When cleaning bare floors:

Selectthe“I On”positionforsuctiononlycleaningtoavoidscatteringdirtwhilecleaning.

When cleaning carpets:

Ensureyouhavepulledthehandletowardsyouandselectthe“II Brush Roll On”positiontoagitatethecarpetfibersfordeepercleaningperformance.

IMPORTANT:Toprotectyourcarpets,theBrushRollwillonlyturnonwhenyouhavepulledthehandlebacktowardsyouandreleasedtheFloorPowerNozzle.

IMPORTANT:YourBrushRollIndicatorLightwillilluminatesolidgreenwhenbrushrollison,orsolidredifthereisablockage.ThisfeatureisdesignedtoprotectyourLifetimeBeltthatpowersyourBrushRoll.See Checking for Blockages on page 11.

NOTE:Theheightofyourpowernozzlehasbeenoptimizedforeasypushingandsuperiorclean-ingonallfloortypes,sothereisnoneedtomakeanyheightadjustmentsasyoutransitiontodifferentfloor&carpettypes.

1 4OFF

Indicator Light

Bare Floors / Tools

Carpets

2

3

4 5 6

1

3

4 5 6

Beforecleaningwithyouraccessories:

Standvacuumintouprightposition.

Secure Super Stretch Hose in the anti-tip hose hook to prevent tipping.

Selectthe“IOn”positionforsuctiononlycleaning.

DO NOTpullvacuumcleaneraroundbythehose.

DO NOToverextendthehose.

2 Using the Cleaning Wand:

Standthevacuumintouprightposition.

RemovetheCleaningWand(withhoseattached)fromtheunit.

PushtheselectedtoolintotheendoftheCleaningWand.

3 Pet Hair Power Brush

4 Dusting Brush

5 Crevice Tool

6 24” Crevice Tool

NV22UKL_26_IB_110314_2.indd 6-7 11-03-15 11:00 AM

Page 6: Owner’s Guide NV22UKL - Lakeland · Your Shark® Navigator Upright is easy to assemble: 1 Lay your vacuum body on a level surface. 2 Slide the electrical connection from the power

8 www.lakeland.co.uk 9

1 Cleaning the Cyclonic Chamber: Option A:QuickEmpty PresstheCyclonicChamberreleasebuttonatthetopoftheDustCup

AssemblyandliftopentheDustCuplid. RemovetheCyclonicChamberfromtheDustCupAssembly. InserttheCyclonicChamberdeepinsidetrashreceptacletocontaindust.

PresstheCyclonicChamberReleaseButtontoopenandremovethebottomdoor.

TapcleantheopenCyclonicChambertoreleasedustandthenattachandclosebottomdoor.

Important:BecarefulnottodamagethemetalscreenonthebottomoftheCyclonicChamberwhenemptying.TearingorchangingtheshapeofthisscreenmaydisrupttheadvancedcyclonicactionanddecreasetheperformanceofyourDustCup–requiringmorefrequentemptyingoftheCyclonicChamber.

ReturnCyclonicChambertoDustCupAssemblyandcloseDustCuplid. DO NOToperateyourvacuumwithouttheCyclonicChamberinplace.

Doingsowouldrequiremorefrequentwashingofthefoamfilers,andcoulddecreasethelifeofyourvacuum.

Option B:AllergySufferers CarrytheDustCupAssemblyandatrashbagoutsideofyourhome. FollowtheinstructionsaboveforOptionA,butinsteadofinserting

CyclonicChamberintoatrashreceptaclewrapthetrashbagaroundtheCyclonicChamber.

2 Washing the Foam and Felt Filters: RemovetheFoamandtheFeltFiltersfromtheFilterHolder. Rinseinlukewarmwateruntilthewaterrunsclear. Squeezefiltersandletairdryfor24hoursbeforereplacing;donot

usehairdryerorotherheatingmethodstodry.Inserttheincludedreplacementfilterswhileothersaredrying.

DO NOToperatethevacuumwithoutALLthefiltersinplace. DO NOToperatethevacuumwithWETfilters. Note:Your2whitefoamsandotherfilterswilldiscolorovertime;thisis

normalandwillnotaffecttheperformanceofthefilters.

Note:ItisNOTrecommendedtorinsethewovenexhaustfilterlocatedonthefrontoftheunit.Thisfilterwillcontinuetolastthelifetimeofyourvacuum.

Toorderadditionalpartsandaccessories,call0800 862 0453.

Emptying the Dust Cup Assembly

ForbestresultsemptytheDustCupAssemblyaftereachuse;emptysev-eraltimesduringprolongedusage.

OremptytheDustCupAssemblywhenitreachestheMAXfillline;NEVER OVER-FILL THE DUST CUP.

Standvacuumintouprightposition.

Turnvacuumoff.

Forpropercare,consultthetabletotherightforthemaintenancescheduleofyourCyclonicChamberandFilters.

Lockvacuumintouprightposition.

Turnvacuumoff.

RemoveDustCupAssembly.

To empty the Dust Cup Assembly:

1 GripcarryhandleandpresstheDustCupreleasebuttontoremoveDustCupAssembly

2 Option A:forQuickEmpty:InsertDustCupAssemblydeepinsidetrashreceptacletocontaindustanddebris.

PresstheDustCupDoorreleasebutton;tapcontainergentlytodislodgeandreleasedustanddebris.

Snapdoorinplace.

Important:IftheDustCupDoordoesnotswingopenafterpressingthereleasebutton,pushthedooropenusingthebottomdoortabs.

CAUTION: Unplugthevacuum;failuretodosomightresultinelectricshock.

CAUTION: Unplugthevacuum;failuretodosomightresultinelectricshock.

3 Option B:ForAllergySufferers:WrapatrashbagaroundtheDustCupAssemblyleavingspaceatthebottomforthedoortoswingopen.

LocatetheDustCupDoorreleasebuttonwithinthetrashbagandpresstoreleaseasyoushakethedustcuptoemptydustanddebris.

Snapthebottomdoorinplace.

Note:OptionBcanalsobeperformedoutsideofthehometofurtherminimizereleasingdustbackintotheair.CarryjusttheDustCupAssemblyandtrashbagoutside.

Note:Somedustanddebrismayremaininthetopofyourdustcupassemblyonornearthemetalscreen.Itisnotnecessarytocompletelyremovethismaterialbeforecontinuingtovacuum;Shark®advancedcyclonicactionwillsweepthemetalscreencleanonceyoubegintorefillyourdustcup.

1 2

2

1

3

Proper Care of Your Shark® Upright Vacuum

NV22UKL_26_IB_110314_2.indd 8-9 11-03-15 11:00 AM

Page 7: Owner’s Guide NV22UKL - Lakeland · Your Shark® Navigator Upright is easy to assemble: 1 Lay your vacuum body on a level surface. 2 Slide the electrical connection from the power

10 www.lakeland.co.uk 11

Troubleshooting Checking for Blockages

WARNING: toreducetheriskofelectricshock,thepowercordmustbedisconnectedbeforeperformingmaintenance/troubleshootingchecks.

Blockagesmaycauseyourvacuumtooverheatandshutdown.Ifso,cleartheblockages,thenfollowtheinstructionsforResetting the Motor Thermostatonpage12.

WARNING:Neverinsertsharpobjectsintoanyopeningtoclearanobstruction.

IMPORTANT:Damagescausedwhileclearingorattemptingtoclearblockagesarenotcoveredunderyourproduct’slimitedwarranty.

Unplugthevacuumbeforecheckingforblockages.

Reassembleallpartssecurelybeforeoperatingvacuum.

1

1

2

2

3

3

4

1 Dust Cup Air Duct:

Standvacuumintouprightposition.

RemoveDustCupAssemblyandemptyDustCupifnecessary.

DisconnecttheSuperStretchHose.

CheckAirDuctbehindDustCupforclogs;clearbeforereplacingDustCupAssembly.

2 Intake Opening behind the Brush Roll:

LaythevacuumflattoexposeBrushRoll.

CheckopeningbehindtheBrushRollforclogs.

Cleartheopening.

CleartheBrushRoll;usescissorstocarefullycutawaythreads,hairorotherdebristhatmightbetrappedinthebristles.

3 Floor Power Nozzle Hose Connector:

Layvacuumflat.

RemoveNozzleHoseandcheckforclogs.

PushtheHoseConnectorbackontotheFloorPowerNozzle.

4 Hose:

Standvacuumupright.

RemovehosefromboththeunitandCleaningWandends.

Inspectbothendsandthelengthofthehoseforclogs.

Returnthehosetotheunit.

12

12

NV22UKL_26_IB_110314_2.indd 10-11 11-03-15 11:00 AM

Page 8: Owner’s Guide NV22UKL - Lakeland · Your Shark® Navigator Upright is easy to assemble: 1 Lay your vacuum body on a level surface. 2 Slide the electrical connection from the power

12 www.lakeland.co.uk 13

Maintenance

Resetting the Motor Thermostat

YourShark®UprightVacuumisequippedwithaprotectiveMotorThermostat.Ifthemotorshouldoverheat,thethermostatshutsoffthepower.

To reset the Motor Thermostat:

MovethePowerButtontothe“O – Off”position.

Unplugthevacuum.

Checkforcloggedhoseorfilter;uncloghoseandreplacefilter.RefertoChecking for Blockagesonpage11.

Wait45minutesforvacuumtocool;thenpluginthevacuum.

TurnthePowerSwitchtothe“I – On”positiontostartthevacuum.

Note:ifvacuumstilldoesnotstart,call08008620453.

1 Cleaning the Pet Hair Power Brush -

Slidelockinglatch(A)forward.

Gentlytiltbrushhousingupwardtoopen.

IMPORTANT: DO NOTforce;itwillnotopenalltheway.

Removedebrisfromturbinewheelandairpassage.

A

Notes

NV22UKL_26_IB_110314_2.indd 12-13 11-03-15 11:00 AM

Page 9: Owner’s Guide NV22UKL - Lakeland · Your Shark® Navigator Upright is easy to assemble: 1 Lay your vacuum body on a level surface. 2 Slide the electrical connection from the power

Shark Customer ServicesPO Box 298MirfieldWF14 9BAFreephone 0800 862 0453www.lakeland.co.uk

Technical DetailsModel number: NV22UKL 26Input: 1200 WattsMain unit voltage: 220-240V., 50 Hz.

COPYRIGHT© EURO-PRO OPERATING LLC 2011

PRINTED IN CHINA

NV22UKL.E.110314.2

Illustrations may differ from actual product.Not to be disposed

of with otherhousehold waste.

NV22UKL_26_IB_110314_2.indd 14 11-03-15 11:00 AM