pad rol 100a - htt group series.pdf · pad rol™100a contactors are ideal for manual device...
TRANSCRIPT
Your Contact For Higher Performance
The Pad ROL™100A offers the best-in-
class electrical performance for testing
your most demanding RF/microwave
communications devices to 40 GHz.
Whether you’re performing engineering
tests on high gain RF amplifiers, RF
transceivers, the latest WiMAX or 3G
devices, the Pad ROL™100A delivers.
Engineered with robust mechanical
performance, the Pad ROL™100A meets
your most demanding production needs
for higher First Pass Yield, longer MTBA,
and lower cost of test. New contact
designs for 0.4mm and >0.5mm pitches
provide longer contact life and longer
MTBA for testing your QFN and DFN
matte tin and NiPdAu packages.
ROL™100A Contacts Device Platings
Gold-Plated Matte Tin & Tin-Based Gold-Plated XL Nickel Palladium Gold
Your Solution for Best-in-Class RF/Wireless Testing
Gold-Plated Contact Profile Matte Tin Configuration > 0.5mm Pitch
Gold-Plated XL Contact Profile NiPdAu Configuration>0.5mm Pitch
(Actual Size)
(Actual Size)
Production Test
The self-cleaning wipe action of the
“rolling contact” design provides many
benefits for Production Test:
•ConsistentContactResistance
•OptimizedElectricalPerformance
•HigherFirstPassYield
•RepeatableSite-to-SitePerformance
• LongerMTBA(MeanTimeBetweenAssists)
•ProlongedLoadBoardLife
•SimpleMaintenance&Rebuilding
• ImprovedOEE(OverallEquipmentEfficiency)
•LowerOverallCostofTest
Characterization
Pad ROL™100A Contactors are ideal for
Manual Device Evaluation, Lab Testing,
Prototyping and Characterization.
•Designedtotestto40GHz.
•Reliableandrepeatableresults.
• LabPerformancecorrelatesto
Production Test Floor.
• RobustManualActuatorlifeof10k+
insertions
Pad ROL™100APAD ROL™100A SERIES CONTACTOR
For QFN, DFN, and Other Pad-Style Applications
DL-VCMA Double-Latch Vertically Compliant Manual Actuator
SL-VCMASingle-Latch VerticallyCompliant Manual Actuator
Johnstech International Corporation • 1210 New Brighton Boulevard • Minneapolis, MN 55413-1641 USA • Tel 612.378.2020 • Fax 612.378.2030 • www.johnstech.com • E-mail [email protected]
© Copyright 2009, Johnstech International Corporation. Specifications subject to change without notice. No part of this document may be reproduced in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without expressed written permission from Johnstech. Johnstech and Johnstech logo are registered trademark s in the USA and other countries.
Johnstech products and components are covered by patents and copyrights in the USA and other countries. LIT 1434-609
PAD ROL™100A PERFORMANCE METHODOLOGY
PAD ROL™100A SPECIFICATIONS
Electrical Specifications Matte Tin Configuration NiPdAu Configuration
Electrical Length (compressed height):
1.10 mm 1.14 mm
Inductance: Self:0.23nH Self:0.33nH
Self:0.14nH Mutual: 0.15 nH
Capacitance: Ground: 0.16 pF Ground: 0.13 pF
Mutual: 0.05 pF Mutual: 0.05 pF
S21 Insertion Loss/Bandwidth (Ground-Signal-Ground):
-1dB @ 40 GHz -1dB @ 39.3 GHz
S11 Return Loss/Bandwidth (Ground-Signal-Ground):
[email protected] [email protected]
S41 Crosstalk/Bandwidth (Ground-Signal-Signal-Ground):
-20dB@32GHz -20dB@40GHz
Average Contact DC Resistance: 50 mOhms 25mOhms
Current Carrying Capability: 4 A 4 A
Current Leakage: <1pA @ 10V <1pA @ 10v
Nearest Decoupling Area: 1.25 mm 1.25 mm
Mechanical Specifications Matte Tin Configuration NiPdAu Configuration
Physical Contact Length: 1.44 mm 1.42mm
Physical Compressed Height: 0.75 mm 0.75 mm
Contactor Life (# of insertions): Elastomers = 300,000 Contacts = 500,000 Housing =1,000,000
Elastomers = 300,000Contacts = 350,000 Housing = 1,000,0000
Contact Compliance: 0.175-0.200mm 0.175-0.200mm
Contact Wipe on Pad: 0.12mm 0.16 mm
Contact Force (per contact): 60 grams 20grams
Contact Tip Coplanarity: 0.05 mm 0.05 mm
Environmental: -40°C to 155°C -40°C to 155°C
Housing Material: Torlon® 5030 Torlon® 5030
Contacts: Gold-Plated Gold-Plated XL
Contact Material: BeCuNiAu BeCuNiAuResults for 0.5mm pitch configurations. Specifications provided here are based on internal testing at Johnstech, customer production sites, and third party electrical testing. Actual individual results may vary based on a wide range of variables including: handler/contactor/load board interface, handler plunge depth and velocity, device presentation, alignment plate condition, package plating characteristics, test floor conditions, maintenance activities, mounting/fastening techniques, non-coplanarity from site to site, non-coplanar docking, and temperature extremes.
Grounding Options
RCI - ROL™ Contacts in Copper Insert Shown on front page
CI - Copper Insert
Pad ROL™100A Series Methodology
Device Under Test
Fine Tip
Elastomer
Load Board
Elastomer
Contact
> 0.5mm pitch matte tin configuration
S11 Return Loss
Frequency (GHz)
Ret
urn
Loss
(dB
)
Frequency (GHz)
Inse
rtio
n Lo
ss (d
B)
Cro
stal
k (d
B)
S21 Insertion Loss
S41 Crosstalk
Frequency (GHz)
Contact Resistance
Co
ntac
t R
esis
tanc
e in
mΩ
Manual ActuatorDouble-Latch(DL-VCMA)and Single-Latch(SL-VCMA)VerticallyCompliant Manual Actuators are available. Manual Actuator Material is Ultem®2300.
Housing OptionsStandardHousings=38.1mmx38.1mmand 25mmx25mm.Customdesignsareavailable. Contact Johnstech for assistance.
Contact OptionsGold-PlatedFineTip(>0.5mm pitch) - matte tin Gold-PlatedFullTip(0.4mmpitch)-mattetin Gold-PlatedXLFineTip(>0.5mm pitch) - NiPdAu Gold-PlatedXLFineTip(0.4mmpitch)-NiPdAu
JohnstechServices/ResourceOptionsTestFloorTechnicalSupport-Worldwide FieldServiceOffices;First-PassYield Enhancement;PerformanceAudits;CustomizedTraining and Applications Engineering. OnlineTechSupportat:www.johnstechhelp.com
EngineeringServicesLoadBoardEvaluation&Testing;HFSS3DModeling;ElectricalPerformanceAnalysis;PCB/Contactor/DeviceOptimization;ContactorSParameterData;ThermalConductivityAnalysisandAdvancedDesignSystem(ADS)Simulation,Analysis & Optimization.
Website (www.johnstech.com)Product,Test,IndustrySupportInformation;Downloadable,ProductSpecSheets;MaintenanceandInspectionGuides;TechPapersandApplication Notes.
0
100
200
300
0 5000 10000 15000 20000Insertions
-55-50-45-40-35-30-25-20-15-10
-50
0 4 8 12 16 20 24 28 32 36 40
-60
-50
-40
-30
-20
-10
0
0 4 8 12 16 20 24 28 32 36 40
-1.25
-1
-0.75
-0.5
-0.25
0
0 4 8 12 16 20 24 28 32 36 40
RTH - ROL™ Contacts in Housing is one of Johstech’s recommended Grounding Options. Other available options shown here.
Your Contact For Higher Performance.
Johnstech’s patented ROL™ technology
provides excellent electrical performance
and proven mechanical reliability for
applications including Precision Analog
and RF. The ROL™200 Series provides
Contact/Elastomer configurations for the
unique challenges of matte tin and NiPdAu
packages.
ROL™200 Contacts Device Platings
Gold-Plated Matte Tin & Tin-Based Gold-Plated XL Nickel Palladium Gold
Production Test
The “rolling contact” design of the ROL™
Contactor, which creates a self-cleaning
wipe action, provides extensive Production
Test benefits:
•ConsistentContactResistance
•OptimizedElectricalPerformance
•HigherFirstPassYield
Gold-Plated Contact Profile Matte Tin Configuration > 0.5mm Pitch
Gold-Plated XL Contact Profile NiPdAu Configuration> 0.5mm Pitch
(Actual Size)
(Actual Size)
•RepeatableSite-to-SitePerformance
• LongerMTBA(MeanTimeBetweenAssists)
•ProlongedLoadBoardLife
•SimpleMaintenance&Rebuilding
• ImprovedOEE(OverallEquipmentEfficiency)
•LowerOverallCostofTest
Characterization
ROL™200 Contactors are ideal for
Manual Device Evaluation, Lab Testing,
PrototypingandCharacterization.
•Designedtotestto20GHz.
•Reliableandrepeatableresults.
• LabPerformancecorrelatesto
Production Test Floor.
• RobustManualActuatorlifeof10k+
insertions
Pad ROL™200PAD ROL™200 SERIES CONTACTOR
For QFN, DFN, and Other Pad-Style Applications
DL-VCMA Double-Latch Vertically Compliant Manual Actuator
SL-VCMASingle-Latch VerticallyCompliant Manual Actuator
Johnstech International Corporation • 1210 New Brighton Boulevard • Minneapolis, MN 55413-1641 USA • Tel 612.378.2020 • Fax 612.378.2030 • www.johnstech.com • E-mail [email protected]
© Copyright 2009, Johnstech International Corporation. Specifications subject to change without notice. No part of this document may be reproduced in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without expressed written permission from Johnstech. Johnstech and Johnstech logo are registered trademarks in the USA and other countries.
Johnstech products and components are covered by patents and copyrights in the USA and other countries. LIT 1433-609
PAD ROL™200 PERFORMANCE
METHODOLOGY
PAD ROL™200 SPECIFICATIONS
Electrical Specifications Matte Tin Configuration NiPdAu Configuration
Electrical Length (compressed height):
2.00 mm 2.07 mm
Inductance: Self:0.42nH Self:0.50nH
Mutual:0.24nH Mutual:0.13nH
Capacitance: Ground:0.35pF Ground:0.30pF
Mutual:0.13pF Mutual:0.12pF
S21 Insertion Loss/Bandwidth (Ground-Signal-Ground):
-1dB@24GHz [email protected]
S11 Return Loss/Bandwidth (Ground-Signal-Ground):
-20dB@4GHz [email protected]
S41 Crosstalk/Bandwidth (Ground-Signal-Signal-Ground):
-20dB@18GHz [email protected]
Average Contact DC Resistance: 30mOhms 20 mOhms
Current Carrying Capability: 4 A 4 A
Current Leakage: <1pA@10V <1pA@10v
Nearest Decoupling Area: 1.58 mm 1.58 mm
Mechanical Specifications Matte Tin Configuration NiPdAu Configuration
Physical Contact Length: 2.63mm 2.58mm
Physical Compressed Height: 1.40mm 1.40mm
Contactor Life (# of insertions): Elastomers=300,000 Contacts = 500,000 Housing=2,000,000
Elastomers=300,000Contacts=350,000 Housing=2,000,0000
Contact Compliance: 0.20 mm 0.20 mm
Contact Wipe on Pad: 0.17mm 0.17mm
Contact Force (per contact): 70 grams 30grams
Contact Tip Coplanarity: 0.05 mm 0.05 mm
Environmental: -40°Cto155°C -40°Cto155°C
Housing Material: Torlon®5030 Torlon®5030
Contacts: Gold-Plated Gold-Plated XL
Contact Material: BeCuNiAu BeCuNiAu
Results for 0.5mm pitch configurations. Specifications provided here are based on internal testing at Johnstech, customer production sites, and third party electrical testing. Actual individual results may vary based on a wide range of variables including: handler/contactor/load board interface, handler plunge depth and velocity, device presentation, alignment plate condition, package plating characteristics, test floor conditions, maintenance activities, mounting/fastening techniques, non-coplanarity from site to site, non-coplanar docking, and temperature extremes.
Grounding OptionsRTH-ROL™ContactsinHousingisoneofJohnstech’srecommendedGroundingOptions(shownonfront).Other available options shown here.
CI - Solid Copper Insert
Pad ROL™200 Series Methodology
S11 Return Loss
Frequency (GHz)
Ret
urn
Loss
(dB
)
Frequency (GHz)
Inse
rtio
n Lo
ss (d
B)
S21 Insertion Loss
Contact Resistance
Manual ActuatorDouble-Latch(DL-VCMA)and Single-Latch(SL-VCMA)VerticallyCompliant Manual Actuators are available. Manual Actuator Material is Ultem®2300.
HousingOptionsHousingareofferedinstandardhandler-specificsizeswithcustomersizesalsoavailable.ContactJohnstechforassistance.
Contact OptionsGold-PlatedFineTip(>0.5mm pitch) - matte tin Gold-PlatedFineTip(0.4mmpitch)-mattetin Gold-PlatedXLFineTip(>0.5mm pitch) - NiPdAu Gold-PlatedXLFineTip(0.4mmpitch)-NiPdAu
Johnstech Services/Resource OptionsTest Floor Technical Support - Worldwide FieldServiceOffices;First-PassYield Enhancement;PerformanceAudits;CustomizedTrainingand Applications Engineering. Online Tech Support at: www.johnstechhelp.com
Engineering ServicesLoadBoardEvaluation&Testing;HFSS3DModeling;Electrical Performance Analysis; PCB/Contactor/Device Optimization;ContactorSParameterData;ThermalConductivityAnalysisandAdvancedDesignSystem(ADS)Simulation,Analysis&Optimization.
Website (www.johnstech.com)Product,Test,IndustrySupportInformation;Downloadable,ProductSpecSheets;MaintenanceandInspectionGuides;Tech Papers and Application Notes.
-45-40-35-30-25-20-15-10
-50
0 4 8 12 16 20 24 28 32 36 40-3
-2.5
-2
-1.5
-1
-0.5
0
0 4 8 12 16 20 24 28 32 36 40
S41 Crosstalk
Frequency (GHz)
-50
-40
-30
-20
-10
0
0 4 8 12 16 20 24 28 32 36 40
Ground Inductance
0
20
40
60
80
100
0 5,000 10,000 15,000 20,000Insertions
Eq
uiva
lent
Gro
und
Ind
ucta
nce
(nH
)
Package Size (mm)
Device Under Test
Fine Tip
Elastomer
Load Board
Contact
Elastomer
Decoupler
EI- Eco™-1 Insert 3x3 mm package
EI- Eco™-1 Insert 4x4 mm package
00.05
0.10.15
0.20.25
0.30.35
0.40.45
0.5
4 5 6 7 8 9 10
> 0.5mm pitch matte tin configuration
RCI - ROL™ Contacts in Copper Insert
Cro
stal
k (d
B)
Co
ntac
t R
esis
tanc
e in
mΩ
Matte Tin Configuration (0.5mm pitch)NiPdAu Configuration (0.5mm pitch)
Matte Tin Configuration (0.5mm pitch)NiPdAu Configuration (0.5mm pitch)
Matte Tin Configuration (0.5mm pitch)NiPdAu Configuration (0.5mm pitch)
Matte Tin Configuration (0.5mm pitch)NiPdAu Configuration (0.5mm pitch)
Pad ROL™200 Series Contacts in HousingGround Insert