performance label materials - sp-sys.it · for more than fifty years, 3m industrial adhesives,...

Product Selection Guide

3M Converter Markets

3M EuropeHermeslaan 7B-1831 DiegemTel. +32 2 722 45 50Fax +32 2 722 45 [email protected]

3M Converter Markets Department123, Johnstone AvenueHillington,Glasgow G52 4NZ, ScotlandTel. +44 141 891 4302Fax +44 141 891 4319

PerformanceLabel Materials

2010

For more than fifty years, 3M industrial adhesives, label materials and specialty products have been helping companies worldwide increase production efficiency and improve product performance, appearance and identification.

Today, 3M Converter Markets is a single resource for a versatile and comprehensive range of products and solutions for the graphic convertingindustry.

In this guide, you will find the core range of our label materials, including information on 3M adhesives, top-coats, face materials and liners, including a comprehensive listing of UL, cUL and CSA recognised components, for applications in electronics, automotive, logistics, chemical and pharmaceutical, laboratory, engineering and many other market sectors.

If you can’t find exactly what you’re looking for, call us for information on our wider product range. Did you know, for example, that within our label materials product range, we have over 150,000 possible product combinations?

3M has been a global leader in adhesive technology for over 100 years. That’s why our diverse customer base looks towards 3M for practical and ingenious solutions to provide competitive advantages in a rapidly changingmarketplace.

SolutionsPractical, Ingenious

To Help You Succeed

Note – Full product descriptions can be found in the Product Index Section on Pages 23 & 24

Your Product ChoiceStarts Here…

92200 Polyester Label

Product: Typical Performance Characteristics: Specs:Product Construction:

92200RoHS

Face material: 50µ Polyester, Gloss Clear / TT2Adhesive: 3M™ SE100Liner: 65 gsm Double-sided White Glassine

This technical information and data should considered representative or typical only and should not be used for specification purposes. Material calipers are nominal values.The information is intended as a guideline only. Users should carefully evaluate products for their application.The products above refer to a selection of 3M Performance Label Materials. Contact us for details of our full range.

3

Material

Designed for application onto textured, grained and structured very low surface energy plastics such as Polypropylene (PP), mineral filled and fibre reinforced PP and Polyamide (PA) composites. These types of plastic materials are used increasingly in the automotive industry in the engine compartment and for interior and exterior applications.

92200 utilises 3MTM SE100 Adhesive for High Bond Performance to Composite Materials.

•Labels to be used on difficult to adhere to surfaces•Warning, Instruction and service labels for durable goods•Wooden crate labelling e.g: shipping labels•Rough surface fabric labelling•‘Bulk-bag’ labelling for builders’ supplies•Plastic & concrete pipes•Electronic housings, e.g. hole covering•Food & bakery tray identification

92200 Application Ideas92200 Application Ideas

•3MTM SE100 adhesive gives high adhesion to very low surface energy surfaces•Ultra-high 65 g/m2 adhesive coat weight for excellent adhesion to rough and textured surfaces.•Densified double-side glassine liner assures consistent die cutting. The double-side liner improves ease of dispensing and reduces issues related to oozing.•Facestock is topcoated for thermal transfer printing. Resin ribbons are recommended for optimum durability. The top coat also provides improved ink anchorage for traditional forms of press printing.


Thermal transfer printable face material with high stability adhesive. Offers permanentadhesion, yet is removable from many surfaces.5770

ULCSARoHS

Face material: 50µ Polyester, Matt White / MTC¹Adhesive: 3M™ 550Liner: 90gsm Densified Kraft

Polyester, Matt White

Face material: 50µ Polyester, Matt White / TT5Adhesive: 3M™ 300ELiner: 90gsm White Glassine



Face material: 50µ Polyester, Matt White / TT3Adhesive: 3M™ 350E/46 gsmLiner: 65gsm Double-sided White Glassine

ULcULRoHS

ULcULRoHS

ULcULRoHS

ULcULRoHS

350E adhesive for performance applications that require thermal transfer printing and demand adhesive performance on difficult to stick to surfaces, e.g. plastics or powder coats. Top-coat resistant to harsh chemicals such as brake fluid.

This selection of label materials can also be printed by conventional print methods such as letterpress, flexo, hot foil.

Features ultra-smooth top-coat, ideal for bar code applications. Good durability with a wide range of ribbons. Excellent adhesion to LSE substrates.7810EH

Features ultra-smooth top-coat, ideal for bar code applications. Good durability with a wide range of ribbons. Firm adhesive that resists oozing.7815EB

7815EHFeatures ultra-smooth top-coat, ideal for bar code applications. Good durability with a wide range of ribbons. Firm adhesive that resists oozing.

7874EC


Features ultra-smooth top-coat, ideal for bar code applications. Good durability with a wide range of ribbons. Excellent adhesion to LSE substrates.7810E

ULcULRoHS


Features ultra-smooth top-coat, ideal for bar code applications. Good durability with a wide range of ribbons. Firm adhesive that resists oozing. TT1 Top-coat.7815E

ULcULRoHS

Face material: 50µ Polyester, Matt White / TCAAdhesive: 3M™ HP100Liner: 90gsm White Glassine

Face material: 50µ Polyester, Matt White / TCBAdhesive: 3M™ HP100Liner: 90gsm Lay-flat Kraft

Face material: 50µ Polyester, Matt White / TCBAdhesive: 3M™ HP100Liner: 90gsm White Glassine

Face material: 50µ Polyester, Matt White / TCBAdhesive: 3M™ R185Liner: 90gsm Lay-flat Kraft

Matt top-coated – suitable for use with a range of thermal transfer ribbons to give a durableimage. Firm adhesive that resists oozing. Utilises 3M “A” Top-coat.H01CH

Matt top-coated – suitable for use with a range of thermal transfer ribbons to give a durableimage. Firm adhesive that resists oozing. Utilises 3M “B” Top-coat.H11C3

Matt top-coated – suitable for use with a range of thermal transfer ribbons to give a durableimage. Firm adhesive that resists oozing. Utilises 3M “B” Top-coat.H11CH

Matt top-coated – suitable for use with a range of thermal transfer ribbons to give a durableimage. Removable adhesive. Utilises 3M “B” Top-coat.H11P3

ULBS5609RoHS

ULcULRoHS

ULcULRoHS

RoHS

G61SBULcULRoHS

Face material: 50µ Polyester, Matt White / MTC¹Adhesive: 3M™ 250ELiner: 65gsm White Glassine

Matt top-coated. Suitable for use with a wide range of ribbons to give a durable image.Designed for general purpose durable label applications in a wide range of industrysectors.


Face material: 50µ Polyester, Matt White / 3M dm MattAdhesive: 3M™ 300Liner: 90gsm Densified Kraft

Matt top-coated – suitable for use for dot matrix printing for bar codelabels. Very goodadhesion to LSE surfaces. Suitable for for use on a wide range of plastic substrates.Lay-flat Kraft liner suitable for rotary die-cutting and sheeting.

7880

¹Matt top-coated



ULCSARoHS

Face material: 50µ Polyester, Gloss White / GTC¹Adhesive: 3M™ 550Liner: 90gsm Densified Kraft

Polyester, Gloss White

Face material: 50µ Polyester, Gloss White / TT2Adhesive: 3M™ 310ELiner: 65gsm Double-sided White Glassine

ULRoHS7816EC

Face material: 50µ Polyester, Gloss White / TT2Adhesive: 3M™ 310ELiner: 65gsm White Glassine

7816EULcULRoHS

Offers excellent durability with a wide range of ribbons.Firm adhesive that resists oozing.

Offers excellent durability with a wide range of ribbons.Firm adhesive that resists oozing.

ULCSARoHS

4

Thermal Transfer Materials


3Durable face material for harsh environments. Excellent results with a wide rangeof ribbons. Excellent adhesion to low surface energy plastics.7860E

ULcULRoHS

Face material: 50µ Polyester, Gloss White / TT2Adhesive: 3M™ 300Liner: 65gsm White Glassine

Face material: 50µ Polyester, Gloss White / TT2Adhesive: 3M™ 300ELiner: 90gsm White Glassine

7860EHULcULRoHS

Durable face material for harsh environments. Excellent results with a wide rangeof ribbons. Excellent adhesion to low surface energy plastics.

¹Gloss top-coated

Face material: 50µ Polyester, Gloss White / TT2Adhesive: 3M™ 310ELiner: 90gsm White Glassine7816EH Offers excellent durability with a wide range of ribbons.

Firm adhesive that resists oozing.

ULcULRoHS

Face material: 50µ Polyester, Gloss White / TT2Adhesive: 3M™ 350E/20gsmLiner: 65gsm White Glassine

Face material: 50µ Polyester, Gloss White / TT2Adhesive: 3M™ 350E/46 gsmLiner: 65gsm Double-sided White Glassine

Face material: 50µ Polyester, Gloss White / TT2Adhesive: 3M 350E/46 gsmLiner: 90gsm Double-sided White Glassine

ULcULRoHS

ULcULRoHS

ULcULRoHS

7868E

7871EC

7871EJ

350E adhesive for performance applications that require thermal transfer printing and demand adhesive performance on difficult to stick to surfaces, e.g. smooth plastics or powder coats.

350E adhesive for performance applications that require thermal transfer printing and demand adhesive performance on difficult to stick to surfaces, e.g. plastics, powderor slightly oily metals.

350 adhesive for performance applications that require thermal transfer printing and demand adhesive performance on difficult to stick to surfaces, e.g. plastics, powderor slightly oily metals.

D85YBULcULRoHS

Face material: 50µ Polyester, Semi-gloss White / PT¹Adhesive: 3M 250ELiner: 65gsm White Glassine

Print-treated surface. Suitable for use with a wide range of ribbons to give a durable image.Designed for general purpose durable label applications in a wide range of industrysectors.

¹Print-treated

Face material: 50µ Polyester, Gloss White / 3M GlossAdhesive: 3M™ 350E/46gsmLiner: 90gsm Densified Kraft

Face material: 50µ Polyester, Gloss White / 3M GlossAdhesive: 3M™ 300Liner: 90gsm Densified Kraft

Face material: 50µ Polyester, Gloss White / TT2Adhesive: 3M 450E/20 gsmLiner: 65gsm Double-sided White Glassine

ULcULRoHS

ULRoHS

ULRoHS

7871

7331

76670C

Excellent durability with a wide range of ribbons. Heavy coat weight adhesive fortextured surfaces. Excellent high temperature resistance. Excellent adhesion to LSEsubstrates and powder coatings.

Excellent durability with a wide range of ribbons. Permanent adhesive with verygood adhesion to LSE plastics

450E low cost acrylic adhesive. This adhesive is designed as a medium-performanceadhesive for applications to a variety of indoor substrates. Resistant to moistureand occasional exposure to moisture

7816ULCSARoHS

Face material: 50µ Polyester, Gloss White / 3M GlossAdhesive: 3M 310Liner: 90gsm Densified Kraft

Excellent durability with a wide range of ribbons. Firm adhesive that resists ozing.


Polyester, Matt Clear

Face material: 25µ Polyester, Matt Clear / TCBAdhesive: 3M™ HP100Liner: 65gsm White Glassine

Matt top-coated 25 micron film – ideal for use as a thermal transfer printableover-laminate. Firm adhesive that resists oozing.H12CB RoHS

H12C3 RoHSFace material: 25µ Polyester, Matt Clear / TCBAdhesive: 3M™ HP100Liner: 90gsm Lay-flat Kraft

Matt top-coated 25 micron film – ideal for use as a thermal transfer printableover-laminate. Firm adhesive that resists oozing.


Ideal as an over-laminate where thermal transfer printability is required.Excellent adhesion to low surface energy plastics.7861

ULCSARoHS

Face material: 50µ Polyester, Gloss Clear / TT2Adhesive: 3M™ 300Liner: 65gsm White Glassine

Polyester, Gloss Clear

Face material: 50µ Polyester, Gloss Clear / TT2Adhesive: 3M™ 300ELiner: 90gsm White Glassine

Face material: Polyester, Gloss Clear / TT2Adhesive: 3M™ HP100Liner: 65gsm Double-sided White Glassine

ULRoHS

7861EH

G35CC

Face material: 50µ Polyester, Gloss Clear / TT2Adhesive: 3M™ 300ELiner: 65gsm White Glassine

7861E

Face material: 50µ Polyester, Gloss Clear / TT2Adhesive: 3M™ 350E/46 gsmLiner: 65gsm White Glassine

7876EC ULRoHS

ULcULRoHS

ULRoHS

Heavy adhesive coat-weight for textured surfaces. Excellent high temperatureresistance. Excellent adhesion to low surface energy plastics and powder coats.

Face material: Polyester, Gloss Clear / TT2Adhesive: 3M™ HP100Liner: 90gsm Lay-flat Kraft

G35C3 ULRoHS

Ideal as an over-laminate where thermal transfer printability is required.Excellent adhesion to low surface energy plastics.

Ideal as an over-laminate where thermal transfer printability is required.Excellent adhesion to low surface energy plastics.

25 micron film – ideal for use as a thermal transfer printableover-laminate. Firm adhesive that resists oozing.

25 micron film – ideal for use as a thermal transfer printableover-laminate. Firm adhesive that resists oozing.

5


Thin face material (36 micron) conforms to curved surfaces. Durable TT3 top-coatoffers brake fluid resistance with suitable ribbon. Ideal for automotive applications.76712 UL

RoHS

Face material: 36µ Polyester, Matt Silver / TT3Adhesive: 3M™ 450ELiner: 90gsm White Glassine

Polyester, Matt Silver

Face material: 50µ Polyester, Matt Silver / TT3Adhesive: 3M™ 350E/46 gsmLiner: 90gsm Double-sided White Glassine




ULRoHS

ULRoHS

ULRoHS

ULcULRoHS

Excellent durability with a wide range of ribbons. 75 Micron face material.Premium top-coat for lower heat settings.Firm adhesive that resists oozing.

76751S

75 micron face offers good rigidity for bar code labels or information labels.Good durability with a wide range of ribbons.Excellent durability with a wide range of ribbons.

7813E

7813EHFeatures ultra-smooth top-coat on 75 micron face material. Ideal for bar code applications. Good durability with a wide range of ribbons. Excellent adhesion to low surface energy substrates.

7818EH


Excellent durability with a wide range of ribbons. Firm adhesive that resists oozing.Durable TT3 top-coat offers brake fluid resistance with suitable ribbon. Ideal forautomotive applications.

7808E ULRoHS


76751C ULRoHS


Face material: 50µ Polyester, Matt Silver / TCAAdhesive: 3M™ HP100Liner: 90gsm White Lay-flat Kraft

7879EJ

Matt top-coated – suitable for use with a range of thermal transfer ribbons to give a durableimage. Firm adhesive that resists oozing..7818

UL, cULBS5609RoHS

Face material: 50µ Polyester, Matt Silver / TCAAdhesive: 3M™ HP100Liner: 65gsm White Glassine

Face material: 50µ Polyester, Matt Silver / TCAAdhesive: 3M™ HP100Liner: 90gsm White Glassine

Matt top-coated – suitable for use with a range of thermal transfer ribbons to give a durableimage. Firm adhesive that resists oozing.76780

Matt top-coated – suitable for use with a range of thermal transfer ribbons to give a durableimage. Firm adhesive that resists oozing.H00CH

Heavy adhesive coat-weight for textured surfaces. Excellent high temperatureresistance. Excellent adhesion to low surface energy plastics and powder coats.TT3 durable top-coat offers brake fluid resistance on a 50 micron face material.



ULBS5609RoHS

ULBS5609RoHS

H10C3 Matt top-coated – suitable for use with a range of thermal transfer ribbons to give a durableimage. Firm adhesive that resists oozing. Lay-flat Kraft for sheeting applications.

Face material: 50µ Polyester, Matt Silver / TCBAdhesive: 3M™ HP100Liner: 90gsm Lay flat Kraft

RoHS

ULcULRoHS

H10CH Matt top-coated – suitable for use with a range of thermal transfer ribbons, giving extrachemical and UV resistance (‘B’ Top-coat). Firm adhesive that resists oozing.

Face material: 50µ Polyester, Matt Silver / TCBAdhesive: 3M™ HP100Liner: 90gsm White Glassine

ULRoHS

G62SBULcULRoHS

Face material: 50µ Polyester, Matt Silver /MTC¹Adhesive: 3M™ 250ELiner: 65gsm White Glassine


Polyester, Gloss Silver (Platinum)

Face material: 50µ Polyester, Gloss Silver / TT2Adhesive: 3M™ 350E/46 gsmLiner: 90gsm Double-sided White Glassine

7872EJ

Face material: 50µ Polyester, Gloss Silver / TT2Adhesive: 3M™ 350E/46 gsmLiner: 65gsm Double-sided White Glassine7872EC

Face material: 50µ Polyester, Gloss Silver / TT2Adhesive: 3M™ 310ELiner: 65gsm White Glassine

7875EULcULRoHS

ULcULRoHS

ULcULRoHS

Excellent durability with a wide range of ribbons.Firm adhesive that resists oozing.

Heavy adhesive coat-weight for textured surfaces. Excellent high temperatureresistance. Excellent adhesion to low surface energy plastics and powder coats.Double-sided liner resists blocking of die-cut labels.

Heavy adhesive coat-weight for textured surfaces. Excellent high temperatureresistance. Excellent adhesion to low surface energy plastics and powder coats.Double-sided liner resists blocking of die-cut labels.

D84YBULcULRoHS

Face material: 50µ Polyester, Gloss Silver / PT¹Adhesive: 3M™ 250ELiner: 65gsm White Glassine

Print-treated surface. Suitable for use with a wide range of ribbons to give a durable image.Designed for general purpose durable label applications in a wide range of industrysectors.

¹Print-treated


6

7818E Very good durability with a wide range of ribbons. 75 micron face material. firm adhesive that resists oozing


ULcULRoHS

Face material: 50µ Polyester, Gloss Silver / TT2Adhesive: 3M™ 350E/46 gsmLiner: 90gsm Densified Kraft

7872ULCSARoHS

Excellent durability with a wide range of ribbons. 350E adhesive for performanceapplications on difficult to stick surfaces.

Face material: 50µ Polyester, Matt Silvere / 3M dm MattAdhesive: 3M™ 300Liner: 90gsm Densified Kraft

Matt top-coated – suitable for use for dot matrix printing for bar codelabels. Very goodadhesion to LSE surfaces. Suitable for for use on a wide range of plastic substrates.Lay-flat Kraft liner suitable for rotary die-cutting and sheeting.

ULCSARoHS

Matt top-coated. Suitable for use with a wide range of ribbons to give a durable image.Designed for general purpose durable label applications in a wide range of industrysectors.

7883

Polypropylene, Gloss WhiteProduct: Typical Performance Characteristics: Specs:Product Construction:

76710 RoHSFace material: 60µ Polypropylene, Gloss White / TT0Adhesive: 3M™ 350E/30 gsmLiner: 65gsm White Glassine

Face material: 60µ Polypropylene, Gloss White / PT¹Adhesive: 3M™ P1400Liner: 90gsm Densified Kraft

Corona treated. Bright white face material offers high opacity. Film stiffness offers easydie-cutting and dispensing on automatic applicators. Good thermal transfer printabilityusing suitable resin ribbon

7777ULCSARoHS

350E adhesive for performance applications that require thermal transfer printing and demand adhesive performance on difficult to stick to surfaces, e.g. smooth plastics or powder coats.

Polyethylene, Matt WhiteProduct: Typical Performance Characteristics: Specs:Product Construction:

76998 BS5609RoHS

Face material: 110µ High Density Polyethylene, Matt White / TT0Adhesive: 3M™ 241ELiner: 65gsm White Glassine

Ideal for packaging labels or drum labels.241E adhesive can be applied at low temperatures.Smooth surface for thermal transfer printing with a suitable resin ribbon.

¹Print-treated

This selection of label materials can be printed by conventional print methods such as letterpress, flexo, hot foiland also by thermal transfer


3690EULCSARoHS

Face material: 50µ Cast Vinyl, Gloss WhiteAdhesive: 3M™ 320Liner: 90gsm Double-sided Brown Glassine

Cast Vinyl, Gloss White

Durable cast film, flexible and conformable. Smooth surface for excellent thermal transferprinting. Outstanding weathering properties. Non-transferable on some surfaces.


3692E ULCSA

Face material: 50µ Cast Vinyl, Gloss YellowAdhesive: 3M™ 320Liner: 90gsm Double-sided Brown Glassine

Polyester, Gloss Yellow

Durable cast film, flexible and conformable. Smooth surface for excellent thermal transferprinting. Outstanding weathering properties. Non-transferable on some surfaces.Ideal for warning or information labels.

3692-1802E

Durable cast film, flexible and conformable. Smooth surface for excellent thermal transferprinting. Outstanding weathering properties. Non-transferable on some surfaces.Ideal for warning or information labels. RoHS compliant.

Face material: 50µCast Vinyl, Gloss YellowAdhesive: 3M™ 320Liner: 90gsm Double-sided Brown Glassine

UL CSARoHS


3698EULCSARoHS

Face material: 50µ Cast Vinyl, Gloss SilverAdhesive: 3M™ 320Liner: 90gsm Double-sided Brown Glassine

Cast Vinyl, Gloss Silver

Durable cast film, flexible and conformable. Smooth surface for excellent thermal transferprinting. Outstanding weathering properties. Non-transferable on some surfaces.


7


7863ULCSARoHS

Face material: 50µ Polyester, Bright Silver / GTC¹Adhesive: 3M™ 300Liner: 90gsm Densified Kraft

Polyester, Bright Silver

Heavy adhesive coat-weight for textured surfaces. Excellent high temperatureresistance. Excellent adhesion to low surface energy plastics and powder coats.

¹Gloss top-coated

Cast VinylMaterials



Offers ultra-high temperature performance. Ideal for PCB labels and high temperatureresistant labels. Smooth surface for superior thermal transfer printing of fine bar codes.3921

ULCSARoHS

Face material: 50µ Acrylic, Matt WhiteAdhesive: 3M™ 150Liner: 90gsm Densified Kraft

Acrylic, Matt White

Face material: 50µ Acrylic, Matt WhiteAdhesive: 3M™ 150Liner: 90gsm Double-sided White Glassine

ULCSARoHS3922DSL

Face material: 50µ Acrylic, Matt WhiteAdhesive: 3M™ 150Liner: 65gsm Double-sided White Glassine

3922ULCSARoHS

Offers ultra-high temperature performance. Ideal for PCB labels and high temperatureresistant labels. Smooth surface for superior thermal transfer printing of fine bar codes.Lower coat-weight of adhesive than 3M 3921, making it ideal for smooth surfaces.

Offers ultra-high temperature performance. Ideal for PCB labels and high temperatureresistant labels. Smooth surface for superior thermal transfer printing of fine bar codes.Lower coat-weight of adhesive than 3M 3921, making it ideal for smooth surfaces.


Product: Typical Performance Characteristics: Specs:Product Construction:When bar code printed, the face material extends the maximum scanning distance of long-range scanners. Excellent for bin labels or warehouse racking labels. Smoothsurface for superior bar code printing.

3929 RoHSFace material: 122µ Gloss Silver, retro-reflective / GTC¹Adhesive: 3M™ 200Liner: 130gsm Clay-coated Kraft

Gloss Silver, Retro-reflective

¹Gloss top-coated


8

MaterialsHigh Temperature

MaterialsRetro-reflective

Chemical-resistant

Rough Surface






Extra-high coat-weight 350E adhesive for performance applications that requireadhesion to rough surfaces, such as steel and applications requiring outdoorresistance. Thermal transfer printable. Double-sided liner resists blocking of die-cut labels.

Face material: 75µ Polyester, Gloss White / TT0Adhesive: 3M™ 350E/65 gsmLiner: 90gsm Double-sided White Glassine

76615

76759Extra-high coat-weight 350E adhesive for performance applications that requireadhesion to rough surfaces, such as steel and applications requiring outdoorresistance. Thermal transfer printable. Double-sided liner resists blocking of die-cut labels.


ULcULRoHS

ULcULRoHS


9



Face material is top-coated with a highly durable top-coat, capable of withstanding harshchemicals encountered in both electronic and automotive sector applications. When printedwith specific ribbons, image remain legible after rubbing with toluene, brake fluids, fuels.

Face material: 50µ Polyester, Matt White / HDTC¹Adhesive: 3M™ 350E/27gsmLiner: 90gsm White Glassine

7870E RoHS

76962Face material is top-coated with our most durable top-coat, capable of withstanding harshchemicals encountered in both electronic and automotive sector applications. When printedwith specific ribbons, image remain legible after rubbing with brake fluids, MEK, acetone

Face material: 50µ Polyester, Matt White / ARTC²Adhesive: 3M™ 350E/46gsmLiner: 65gsm Double-sided White Glassine

RoHS



76964 RoHS


Polypropylene, Matt White

76959 RoHS

Face material is top-coated with our most durable top-coat, capable of withstanding harshchemicals encountered in both electronic and automotive sector applications. When printedwith specific ribbons, image remain legible after rubbing with brake fluids, MEK, acetone

Face material is top-coated with our most durable top-coat, capable of withstanding harshchemicals encountered in both electronic and automotive sector applications. When printedwith specific ribbons, image remain legible after rubbing with brake fluids, MEK, acetone

Face material: 50µ Polyester, Matt Silver / ARTC²Adhesive: 3M™ 350E/20gsmLiner: 90gsm Double-sided White Glassine

Face material: 60µ Polypropylene, Matt White / ARTC²Adhesive: 3M™ 350E/20gsmLiner: 90gsm Double-sided White Glassine

¹High-durability top-coat² Acetone-resistant top-coat


Materials

Materials

Tamper-indicating

Product: Typical Performance Characteristics: Specs:Product Construction:Resists one-piece removal. face material fractures and tears easily.Excellent adhesion to low surface energy plastics, powder coats and manyother difficult surfaces.

3812ULCSARoHS

Face material: 40µ Polyurethane, Matt White DestructibleAdhesive: 3M™ 350Liner: 90gsm White Glassine

Polyurethane, Matt White Destructible

Face material: 40µ Polyurethane, Matt White DestructibleAdhesive: 3M™ 350Liner: 65gsm Double-sided White Glassine

3812DSLULCSARoHS

Resists one-piece removal. face material fractures and tears easily.Excellent adhesion to low surface energy plastics, powder coats and manyother difficult surfaces.

Product: Typical Performance Characteristics: Specs:Product Construction:Resists one-piece removal. face material fractures and tears easily.Excellent adhesion to low surface energy plastics, powder coats and manyother difficult surfaces. Pigmented film has ‘block-out’ capability.

7613TULCSARoHS

Face material: 50µ Vinyl, Matt White Destructible / TC¹Adhesive: 3M™ 350Liner: 90gsm Densified Kraft

Vinyl, Matt White Destructible


Resists one-piece removal. face material fractures and tears easily.Ideal for seals on packaging and containers.7711 RoHS

Face material: 50µ Acetate, Matt White Destructible / TC¹Adhesive: 3M™ 250ELiner: 90gsm White Glassine

Acetate, Matt White Destructible


7713 RoHSFace material: 50µ Acetate, Matt Clear Destructible / TC¹Adhesive: 3M™ 250ELiner: 90gsm White Glassine

Acetate, Matt Clear Destructible

Product: Typical Performance Characteristics: Specs:Product Construction:Tamper indicating ‘VOID’ Used for closures in packaging of OTC drugs and for regulatorylabels and seals within automotive, electronics and retail security markets. Face materialresists harsh environments.

7380ULCSARoHS

Face material: 50µ Polyester, Matt White VOID / TC¹Adhesive: 3M™ 300Liner: 90gsm Densified Kraft

Polyester, Matt White Tamper Indicating

Resists one-piece removal. face material fractures and tears easily.Ideal for seals on packaging and containers.


¹Top-coated² Matt top-coated


10

Tamper indicating ‘Triangles’ Used for closures in packaging of OTC drugs and for regulatory labels and seals within automotive, electronics and retail securitymarkets. Face material resists harsh environments.

76970 RoHSFace material: 50µ Polyester, Matt White Triangles / TT5Adhesive: 3M™ 350E/20 gsmLiner: 90gsm White glassine

Typical Performance Characteristics: Specs:Product Construction:Tamper indicating ’VOID’ Used for closures in packaging of OTC drugs and for regulatorylabels and seals within automotive, electronics and retail security markets. Face materialresists harsh environments.

ULCSARoHS

Face material: 50µ Polyester, Gloss White VOID / 3M glossAdhesive: 3M™ 300/20 gsmLiner: 90gsm Densified Kraft

Polyester, Gloss White Tamper Indicating

7866

Typical Performance Characteristics: Specs:Product Construction:Tamper indicating ‘Triangles’ Used for closures in packaging of OTC drugs and for regulatorylabels and seals within automotive, electronics and retail security markets. Face materialresists harsh environments.

RoHSFace material: 50µ Polyester, Matt Silver TRIANGLES / TT5Adhesive: 3M™ 350E/20 gsmLiner: 90gsm White Glassine

Polyester, Matt Silver Tamper Indicating

76971

Tamper indicating ‘VOID’ Used for closures in packaging of OTC drugs and for regulatorylabels and seals within automotive, electronics and retail security markets. Face materialresists harsh environments.

ULcULRoHS

Face material: 50µ Polyester, Matt Silver VOID / TT0Adhesive: 3M™ HP250E/20 gsmLiner: 90gsm White Glassine

G34YH

Materials

Over-laminating

Product: Typical Performance Characteristics: Specs:Product Construction:Non top-coated. Film liner provides superior clarity.Ideal for metallised or dark colours.Excellent durability and UV resistance.

7732FLULCSARoHS

Face material: 25µ Polyester, Matt ClearAdhesive: 3M™ 400Liner: Polyester Film

Polyester, Matt Clear

Face material: 25µ Polyester, Matt ClearAdhesive: 3M™ 400Liner: 70gsm Densified Kraft

ULCSARoHS

Non top-coated. For general purpose over-laminating.Excellent abrasion, UV and chemical resistance.7742

Face material: 23µ Polyester, Matt ClearAdhesive: 3M™ 310ELiner: 73gsm Poly-coated Kraft

Protective over-laminate for label and nameplate graphics. Can be used onappliances, industrial equipment, tools etc. For labels requiring a matt appearance.7736 RoHS

Face material: 23µ Polyester, Matt ClearAdhesive: 3M™ HP100Liner: 73gsm Poly-coated Kraft

23 Micron clear polyester, designed as a high performance over-laminating film.3M HP100 adhesive provides outdoor and UV-resistant durability. Intended forlonger-life applications.

C22CI RoHS

Product: Typical Performance Characteristics: Specs:Product Construction:Designed for applications requiring an ultra-clear look with easy removability withno adhesive residue, such as mobile telephone displays and promotional labelsfor retail packaging. The film is printable for instructions or promotional graphics.

76991 RoHSFace material: 36µ Polyester, Ultra-gloss ClearAdhesive: 3M™ R240Liner: White Polyester Film


Face material: 50µ Polyester, Gloss ClearAdhesive: 3M™ 400Liner: Polyester Film

ULCSARoHS7731FL

Face material: 25µ Polyester, Gloss ClearAdhesive: 3M™ 400Liner: Polyester Film

7730FL

Face material: 25µ Polyester, Gloss ClearAdhesive: 3M™ 400Liner: 70gsm Densified Kraft

7741 ULRoHS

Face material: 23µ Polyester, Gloss ClearAdhesive: 3M™ 310ELiner: 73gsm Poly-coated Kraft

ULRoHS

Non top-coated. For general purpose over-laminating.Excellent abrasion, UV and chemical resistance.

7746

Face material: 23µ Polyester, Gloss ClearAdhesive: 3M™ HP100Liner: 72gsm White Kraft

23 Micron clear polyester, designed as a high performance over-laminating film.3M HP100 adhesive provides outdoor and UV-resistant durability. Intended forlonger-life applications.

C11CI ULRoHS

25 Micron face material Non top-coated. Film liner provides superior clarity.Ideal for metallised or dark colours.Excellent durability and UV resistance.

50 Micron face material Non top-coated. Film liner provides superior clarity.Ideal for metallised or dark colours.Excellent durability and UV resistance.

ULCSARoHS

Protective over-laminate for label and nameplate graphics. Can be used onappliances, industrial equipment, tools etc. For labels requiring a matt appearance.

Selected label materials from this range can be printed by conventional print methods such as letterpress, flexo, hot foiland also by thermal transfer


12

Face material: 23µ Polyester, Gloss ClearAdhesive: 3M™ UC-50/20 gsmLiner: 73gsm Poly-coated Kraft

ULCSARoHS

Very high clarity protective over-laminate for label and nameplate graphics. Can beUsed on appliances, industrial equipment & tools. Gloss appearance

7784

Materials


Readily fractures or de-laminates. Ideal for tamper-indicating labelling.Provides write-on capability.7110 UL¹

RoHS

Face material: 80µ Litho, Matt White DestructibleAdhesive: 3M™ 320Liner: 70gsm Densified Kraft

Litho, Tamper-indicating Uncoated White




Ideal for data-processing applications.Can be easily removed and repositioned on most surfaces with no adhesive residue.7113 RoHS

Face material: 100µ Litho, Matt White Adhesive: 3M™ 1000Liner: 90gsm Densified Kraft

Litho, Uncoated White


High gloss for fine printing. Adheres well to curved surfaces.can be thermal transfer printed with a suitable ribbon.7000 UL¹

RoHS

Face material: 100µ Paper, High-gloss WhiteAdhesive: 3M™ 320Liner: 70gsm Densified Kraft

Paper, High-gloss White


Good thermal transfer printable face material.Can be cleanly removed and repositioned on most surfaces with no adhesive residue.7142 RoHS

Face material: 69µ Litho, Coated WhiteAdhesive: 3M™ 1000Liner: 90gsm Densified Kraft

Litho, Coated White

¹Can be used to display the UL listing mark, but each case must be reviewed by UL follow-up services before use.

13

Sterilisation Cryogenic Blood and Liquids

As performance criteria often varies between laboratories and medicalestablishments, contact us for further information and a solution matched to your own criteria.

Proven 3M™ Performance Label Materials build confidence andperformance into medical andpharmaceutical labelling solutionsfor bags, vials, syringes, bottles, tubesand equipment.

With optimised combinations of 3Madhesives and facestocks, labelsperform reliably in a number of categoriesas shown here …

MaterialsPharmaceutical

MaterialsLaboratory & Medical


Polyester, Matt WhiteThis selection of label materials can be printed by conventional print methods such as letterpress, flexo, hot foiland also by thermal transfer


RoHSFace material: 25µ Polyester, Matt Clear / TCBAdhesive: 3M™ HP100Liner: 90gsm White Lay-flat Kraft

Polyester, Clear

Ideal for laser toner applications with matt top-coating for high resolution images.Firm adhesive that resists oozing. Thin 25 micron face material and adhesivecombination can be used for cable-wrap applications.


I03Y3 ULRoHS

Face material: 50µ Polyester, Matt YellowAdhesive: 3M™ HP250Liner: 90gsm White Lay-flat Kraft

Polyester, Matt Yellow

Matt yellow top-coated laser toner printable product. Higher tack adhesive than 3M HP100,suitable for use on a wider range of plastic substrates. Also suitable for use with thermaltransfer printers, using a suitable ribbon for warning labels.

Face material: 50µ Polyester, Matt White / LT1Adhesive: 3M™ HP250Liner: 120gsm PE coated Lay-flat Kraft

76638ULcULRoHS

Ideal for laser toner applications with matt top-coating for high resolution images.Higher tack adhesive than 3M HP100, suitable for use on a wider range of plasticsubstrates. PE-coated kraft liner suitable for rotary die-cutting.



Face material: 50µ Polyester, Matt SilverAdhesive: 3M™ HP250/20 gsmLiner: 90gsm White Lay-flat Kraft

I00Y3ULcULRoHS

Ideal for laser toner applications with matt top-coating for high resolution images.Higher tack adhesive than 3M HP100, suitable for use on a wider range of plasticsubstrates. Clay-coated kraft liner suitable for rotary die-cutting.


H12C3

MaterialsLaser Toner Printable

14



7847ULCSARoHS

Face material: 60µ Dual-layer Acrylic Film, Matt Black/WhiteAdhesive: 3M™ 350/30 gsmLiner: 90gsm Densified Kraft

2-Layer Acrylic, Matt Black / White

Excellent chemical and environmental resistance.Two-layered film construction provides excellent long-term performance. Excellent adhesion to LSE plastics. Brittle face material provides destructibility on some surfaces.

Product: Typical Performance Characteristics: Specs:Product Construction:ULRoHS

Face material: 60µ Dual-layer Acrylic Film, Gloss Black/WhiteAdhesive: 3M™ 350/30 gsmLiner: 90gsm Densified Kraft

2-Layer Acrylic, Gloss Black / White


Product: Typical Performance Characteristics: Specs:Product Construction:ULCSARoHS

Face material: 60µ Dual-layer Acrylic Film, Matt Silver/BlackAdhesive: 3M™ 350/30 gsmLiner: 90gsm Densified Kraft

2-Layer Acrylic, Matt Silver / Black


Top CoatFacestock

Adhesive

LASER

Liner

In-house Printing Reduces Costs Detailed diagrams can be reproduced

High bar code readability The advantage of durable identification

7846

7848

MaterialsLaser Markable

15



Face material: 50µ Polyester, Matt White / TCBAdhesive: 3M™ R185Liner: 90gsm Lay-flat Kraft

Matt top-coated – suitable for use with a range of thermal transfer ribbons to give a durableimage. Removable adhesive. Utilises 3M “B” Top-coat.H11P3 RoHS



Product: Typical Performance Characteristics: Specs:Product Construction:Designed for applications requiring an ultra-clear look with easy removability withno adhesive residue, such as mobile telephone displays and promotional labelsfor retail packaging. The film is printable for instructions or promotional graphics.

76991 RoHSFace material: 36µ Polyester, Ultra-gloss ClearAdhesive: 3M™ R240Liner: White Polyester Film


¹Matt top-coated

16


ULCSARoHS

Face material: 50µ Polyester, Matt White / MTC¹Adhesive: 3M™ 550Liner: 90gsm Densified Kraft

Product: Typical Performance Characteristics: Specs:Product Construction:Aluminium face material printable with conventional inks and dot matrix printing.Applications include low cost pressure sensitive nameplates with excellent outdoor durability. Adheres well to curved and LSE surfaces. Resists flagging.

7800 RoHSULCSA

Face material: 50µ Aluminium foil / Vinyl top coatAdhesive: 3M™ 320/40 gsmLiner: 90gsm Densified Kraft

Aluminium Foil, Matt Silver

MaterialsRemovable

MaterialsSpecialty


7903 ULCSARoHS

Face material: 50µ Polyester, Bright Silver / 3M glossAdhesive: 3M™ 350Liner: 147 gsm Poly-coated Kraft

Polyester Sheet, Bright Silver

This selection of label materials is supplied as sheets & is for use withsheet-fed Screen Printing Machinery

Durable face material for harsh environments. Press printable gloss top coat. Lay flatpolycoated Kraft liner provides easy sheet processing for screen printing application.



7905 ULCSARoHS

Face material: 50µ Polyester, Gloss clear / 3M glossAdhesive: 3M™ 350Liner: 147 gsm Poly-coated Kraft

Polyester Sheet, Gloss Clear



7908 ULCSARoHS

Face material: 50µ Polyester, Gloss White / 3M glossAdhesive: 3M™ 350Liner: 147gsm Poly-coated Kraft

Polyester Sheet, Gloss White



7909 ULCSARoHS

Face material: 50µ Polyester, Brushed silver / 3M glossAdhesive: 3M™ 350Liner: 147 gsm Poly-coated Kraft

Polyester Sheet, Brushed Silver



7924 ULCSARoHS

Face material: 50µ Polyester, Gloss silver / 3M glossAdhesive: 3M™ 300Liner: 147 gsm Poly-coated Kraft

Polyester Sheet, Gloss Silver


7925 RoHS

Face material: 50µ Polyester, Gloss gold / 3M glossAdhesive: 3M™ 300Liner: 147 gsm Poly-coated Kraft

Polyester Sheet, Gloss Gold



17


7950 RoHS

Face material: 50µ Polyester, Gloss Clear / 3M glossAdhesive: 3M™ 300Liner: 147 gsm Poly-coated Kraft

Polyester Sheet, Gloss Clear


MaterialsSheeted Screen Printable

This selection of label materials is supplied as sheets & is for use withsheet-fed Screen Printing Machinery


18


7930 RoHS

Face material: 100µ Polyester, Soft Clear / TC9Adhesive: 3M™ 350/20 gsmLiner: 146gsm PE-coated Kraft

Vinyl Destructible Sheet, Matt White


7940

Aluminium Foil Sheet, Matt Silver

Resists one-piece removal. face material fractures and tears easily.Excellent adhesion to low surface energy plastics, powder coats and manyother difficult surfaces. Pigmented film has ‘block-out’ capability.

Aluminium face material printable with conventional inks and dot matrix printing.Applications include low cost pressure sensitive nameplates with excellent outdoor durability. Adheres well to curved and LSE surfaces. Resists flagging.

RoHSFace material: 50µ Aluminium foil / Vinyl top coatAdhesive: 3M™ 320/40 gsmLiner: 146gsm PE-coated Kraft

MaterialsSheeted Screen Printable

These are products based on 125 and 175 micron thick white polyesters that do not have adhesive applied to them – they are used as “tags” rather than pressure sensitive label stock and are applied to the substrate by tying it onto itself (see below, as used on plants and trees in garden centres) or with staples, nails, cable-ties etc.

The thicker polyester used means these labels are much more rigid and stiffer than normal 50 micron PET and are more durable.

Specs:Product Construction:


Polyester TAG, 125μ

Gloss White

Face material: 125µ Polyester, Gloss White / TT0Adhesive: N/ALiner: N/A

76612RoHSThick polyester tag material for increased durability and temperature resistance compared to PVC

and PE tags. Easy to handle and apply. Stands rigid for convenient bar code scanning. Suitable for labellingof very difficult surfaces such as wet wood, wet concrete, animals and garden plants. Print receptive glosstop coat for thermal transfer and graphics ink printing.

This technical information and data should considered representative or typical only and should not be used for specification purposes. Material calipers are nominal values.The information is intended as a guideline only. Users should carefully evaluate products for their application.The products above refer to a selection of 3M Performance Label Materials. Contact us for details of our full range. 19

76613 RoHSFace material: 125µ Polyester, Matt White / TT5Adhesive: N/ALiner: N/A


Matt White

Thick polyester tag material for increased durability and temperature resistance compared to PVC and PE tags. Easy to handle and apply. Stands rigid for convenient bar code scanning. Suitable for labellingof very difficult surfaces such as wet wood, wet concrete, animals and garden plants. Print receptive matttop coat for thermal transfer and graphics ink printing.


Matt White

MaterialsThick Polyester TAG


Face material: 175µ Polyester, Matt White / TT5Adhesive: N/ALiner: N/A

76619RoHS


Gloss WhiteProduct: Typical Performance Characteristics: Specs:Product Construction:

RoHSFace material: 175µ Polyester, Gloss White / TT0Adhesive: N/ALiner: N/A

76614Thick polyester tag material for increased durability and temperature resistance compared to PVC and PE tags. Easy to handle and apply. Stands rigid for convenient bar code scanning. Suitable for labellingof very difficult surfaces such as wet wood, wet concrete, animals and garden plants. Print receptive glosstop coat for thermal transfer and graphics ink printing.

Thick polyester tag material for increased durability and temperature resistance compared to PVC and PE tags. Easy to handle and apply. Stands rigid for convenient bar code scanning. Suitable for labellingof very difficult surfaces such as wet wood, wet concrete, animals and garden plants. Print receptive matttop coat for thermal transfer and graphics ink printing.


(For an outline of the Thermal Transfer print properties of this range ofproducts please ask for a copy of our technical service bulletin on Thick PET Tags).

These are products based on 125 and 175 micron thick white and silver polyesters with a matt or gloss finish laminated with 350E adhesive on a special release 90WG white glassine liner. They are particularly useful for hand applying as long thin labels (e.g. on the back of computers) where flexible labels make application difficult. The products can also be applied over joints in plastic casings where a more flexible label can ‘fall into’ the joint and therefore affect barcode readability

This technical information and data should considered representative or typical only and should not be used for specification purposes. Material calipers are nominal values.The information is intended as a guideline only. Users should carefully evaluate products for their application.The products above refer to a selection of 3M Performance Label Materials. Contact us for details of our full range. 20

MaterialsThick Polyester Label




76621RoHSThick polyester gives increased durability, strength and temperature resistance compared to standard 50 micron

PET and other films. Print receptive gloss top coat for thermal transfer and graphics printing. Rigid facestockenables easy hand application of large area labels. High performance acrylic adhesive 350E gives excellent adhesion onto textured and LSE surfaces.

76623 RoHS

Polyester, Bright SilverProduct: Typical Performance Characteristics: Specs:Product Construction:

RoHS76629

76633 RoHS

Polyester, Matt SilverProduct: Typical Performance Characteristics: Specs:Product Construction:

76630RoHS

76646 RoHS

Specs:Product Construction:

RoHS

Polyester, Matt WhiteTypical Performance Characteristics: Specs:Product Construction:

76624 RoHS

76622

Product:


Face material: 125µ Polyester, Matt White / TT5Adhesive: 3M™ 350E/46gsmLiner: 90gsm White Glassine

Face material: 175µ Polyester, Matt White / TT5Adhesive: 3M™ 350E/46gsmLiner: 90gsm White Glassine

Face material: 125µ Polyester, Bright Silver / TT0Adhesive: 3M™ 350E/46gsmLiner: 90gsm White Glassine

Face material: 175µ Polyester, Bright Silver / TT0Adhesive: 3M™ 350E/46gsmLiner: 90gsm White Glassine

Face material: 125µ Polyester, Matt Silver / TT3Adhesive: 3M™ 350E/46gsmLiner: 90gsm White Glassine

Face material: 175µ Polyester, Matt Silver / TT3Adhesive: 3M™ 350E/46gsmLiner: 90gsm White Glassine

Thick polyester gives increased durability, strength and temperature resistance compared to standard 50 micronPET and other films. Print receptive gloss top coat for thermal transfer and graphics printing. Rigid facestockenables easy hand application of large area labels. High performance acrylic adhesive 350E gives excellent adhesion onto textured and LSE surfaces.

Thick polyester gives increased durability, strength and temperature resistance compared to standard 50 micronPET and other films. Print receptive matt top coat for thermal transfer and graphics printing. Rigid face stockenables easy hand application of large area labels. High performance acrylic adhesive 350E gives excellent adhesion onto textured and LSE surfaces.


Thick polyester gives increased durability, strength and temperature resistance compared to standard 50 micronPET and other films. Print receptive gloss top coat for thermal transfer and graphics printing. Rigid face stockenables easy hand application of large area labels. High performance acrylic adhesive 350E gives excellent adhesion onto textured and LSE surfaces.

Thick polyester gives increased durability, strength and temperature resistance compared to standard 50 micronPET and other films. Print receptive gloss top coat for thermal transfer and graphics printing. Rigid face stockenables easy hand application of large area labels. High performance acrylic adhesive 350E gives excellent adhesion onto textured and LSE surfaces.



(For an outline of the Thermal Transfer print properties of this range ofproducts please ask for a copy of our technical service bulletin on Thick PET Labels).


7903AFL RoHS

Polyester, Bright Silver

Durable face material for harsh environments. Press printable primed gloss top coat. Lay flat anti-static polyester liner provides easy sheet processing for screen printingapplication and thermal stability to minimise curl of resin domed labels



7908AFL RoHS



7911AFL RoHS

Polyester, Brushed Silver

21

Anti-static Film Liner RollMaterials

Face material: 50µ Polyester, Bright Silver / TT0Adhesive: 3M™ 350 (46gsm)Liner: 100µ Anti-static Polyester Film

Face material: 50µ Polyester, Gloss White / TT2Adhesive: 3M™ 350 (46gsm)Liner: 100µ Anti-static Polyester Film

Face material: 50µ Polyester, Brushed Silver / TT0Adhesive: 3M™ 350 (46gsm)Liner: 100µ Anti-static Polyester Film

These products use anti-static 100 micron clear PET liners (AFL) which allows them to be sheeted, printed and handled minimising the effects of static electricity such as blocked feeding, attraction of dirt and static discharge. The ant-static film liner also provides excellent lay-flat characteristics and thermal stability to minimise the curl of polyurethane resin domed labels. (For further information on the resin doming process please ask for a copy of our technical service bulletin ‘’Resin Doming FAQs’’).

Printing (Screen, press, digital, etc)

Top Coated PET Facestock (50 micron)

Adhesive (350E)

100 micron Anti-Static PET Liner

Polyurethane Resin Dome


76515 RoHS

Polyester, Gloss Clear (Anti-static Film Liner Product for Decorative Displays)

Face material: 50µ Polyester, Gloss Clear / TT2Adhesive: 3M™ 310E (31gsm)Liner: 100µ Anti-static Polyester Film

Ideal for Point-of-Sale display applications such as large decals for supermarket decoration wherethe Polyester face stock can offer an environmentally friendly alternative to PVC.TT2 gloss top coat gives excellent graphics printability and ink adhesion with conventional print methodsand also UV curable jet inks. Anti-static liner gives perfect adhesive profile and high optical clarityfor defect free application onto glass. High precision acrylic adhesive 310E has excellent UV resistance.

Durable face material for harsh environments. Press printable gloss top coat. Lay flat anti-static polyester liner provides easy sheet processing for screen printingapplication and thermal stability to minimise curl of resin domed labels

Durable face material for harsh environments. Press printable primed gloss top coat. Lay flat anti-static polyester liner provides easy sheet processing for screen printingapplication and thermal stability to minimise curl of resin domed labels


76917 RoHSFace material: 29µ Multi-layer Polymeric FilmAdhesive: N/ALiner: N/A

3M™ Radiant Light Film CM500


This selection of label materials can be printed by conventional print methods such as letterpress, flexo, hot foil,screen and also by thermal transfer

76924 RoHSFace material: 29µ Multi-layer Polymeric Film / TT2Adhesive: N/ALiner: N/A

76922 RoHSFace material: 29µ Multi-layer Polymeric Film / TT2Adhesive: 3M™ 350E / 27gsmLiner: 36µ Clear Polyester

Premium grade reflective colour mirror film. Depending on the viewing angle, the colours areblue, magenta or gold. When combined with suitable colour substrates, different colours canbe achieved. The film is metal free, non-corroding and non-conductive. It may be embossed,die cut, shear slit, precision cut, surface treated to become heat sealable, coated orlaminated with adhesive, printed and extruded into plastics.

Premium grade reflective colour mirror film. Depending on the viewing angle, the colours areblue, magenta or gold. When combined with suitable colour substrates, different colours canbe achieved. The film is metal free, non-corroding and non-conductive. It may be embossed,die cut, shear slit, precision cut, surface treated to become heat sealable, coated orlaminated with adhesive, printed and extruded into plastics. Top-coated.

Premium grade reflective colour film label material. Ideal for use a a label material or anover-laminating film. Ideal for packaging applications. Adhesive will bond to most substrates,including low surface energy plastics.


76918 RoHSFace material: 33µ Multi-layer Polymeric FilmAdhesive: N/ALiner: N/A

3M™ Radiant Light Film CM592

76921 RoHSFace material: 33µ Multi-layer Polymeric Film / TT2Adhesive: N/ALiner: N/A

76923 RoHSFace material: 33µ Multi-layer Polymeric Film / TT2Adhesive: 3M™ 350E / 27gsmLiner: 36µ Clear Polyester

Premium grade reflective colour film label material. Ideal for use a a label material or anover-laminating film. Ideal for packaging applications. Adhesive will bond to most substrates,including low surface energy plastics.

Premium grade reflective colour mirror film. Depending on the viewing angle, the colours arecyan,blue or magenta. When combined with suitable colour substrates, different colours canbe achieved. The film is metal free, non-corroding and non-conductive. It may be embossed,die cut, shear slit, precision cut, surface treated to become heat sealable, coated orlaminated with adhesive, printed and extruded into plastics.

Premium grade reflective colour mirror film. Depending on the viewing angle, the colours arecyan,blue or magenta. When combined with suitable colour substrates, different colours canbe achieved. The film is metal free, non-corroding and non-conductive. It may be embossed,die cut, shear slit, precision cut, surface treated to become heat sealable, coated orlaminated with adhesive, printed and extruded into plastics.

Additional product constructions utilising 3M Radiant Light Films are available – contact us for details.

22

MaterialsRadiant Light Film


23

Label MaterialsProduct Index

This Product Index includes the Core Range of 3M Label Materials featured in this Guide. If you cannot find theproduct you are looking for, contact us.

3812 none 10

3921 none 8

3922 none 8

3929 none 8

5770 none 4

5771 none 4

7000 none 13

7110 none 13

7113 none 13

7142 none 13

7331 none 5

7380 none 10

7711 none 10

7713 none 10

7736 none 12

7741 none 12

7742 none 12

7746 none 12

7777 none 7

7784 none 12

7800 none 16

7816 none 5

7818 none 6

7846 none 15

7847 none 15

7848 none 15

7861 none 5

7863 none 7

7866 none 10

7871 none 5

7872 none 6

7880 none 4

7883 none 6

7903 none 17

7905 none 17

7908 none 17

7909 none 17

7924 none 17

7925 none 17

7930 none 18

7940 none 18

7950 none 17

76615 3M TT0 GW PET75-350E/65-90DWG 9

76638 3M LT1 MW PET50-250E-100LK 14

76710 3M TT0 GLOSS WHITE PP60-350E/30-65WG 7

76712 3M TT3 MS PET36-450E-90WG 6

76759 3M TT4 MSPET75 350E/65 90DWG 9

76760 none 18

76761 none 18

76762 none 18

76763 none 18

76780 3M TT4 MSPET50-HP100-65WG 6

76799 3M TT2 Bright Silver VOID-300E-90WG 11

76801 3M TT0 Gloss RED PET50 VOID-350E-90WG 11

76802 3M TT5 Matt RED PET50 VOID-350E-90WG 11

76803 3M TT0 Gloss BLUE PET50 VOID-350E-90WG 11

76804 3M TT5 Matt BLUE PET50 VOID-350E-90WG 11

76805 3M TT5 Gloss Yellow PET50 VOID-350E-90WG 11

76806 3M TT5 Matt Yellow PET50 VOID-350E-90WG 11

76807 3M TT0 Gloss Red PET50 Triangles-350E-90WG 11

76808 3M TT5 Matt Red PET50 Triangles-350E-90WG 11

76809 3M TT0 Gloss Blue PET50 Triangles-350E-90WG 11

76810 3M TT5 Matt Blue PET50 Triangles-350E-90WG 11

76901 3M PURPLE STOP-241E-65WG 11

76903HT 3M PURPLE STOP-Removable Acrylic-65WG 11

76917 none 22

76918 none 22

76921 none 22

76922 none 22

Product Description Page Product Description Page


24

Label MaterialsProduct Index

This Product Index includes the Core Range of 3M Label Materials featured in this Guide. If you cannot find theproduct you are looking for, contact us.

76923 none 22

76924 none 22

76959 3M AR MW PP60-350E/20-90DWG 9

76962 3M AR MW PET50-350E/20-90DWG 9

76964 3M AR MS PET50-350E/20-90DWG 9

76970 3M TT5 MW PET 50 TRIANGLES-350E-90WG 10

76971 3M TT5 MS PET 50 TRIANGLES-350E-90WG 10

76991 3M ULTRA CLEAR REMOVABLE 12

76998 3M TT0 MW PE90-241E-65WG 7

3690E none 7

3692-1802E none 7

3692E none 7

3698E none 7

3812DSL none 10

3922DSL none 8

7613T none 10

76670C 3M TT2 GW PET50-450E/20-65DWG 5

76751C 3M TT3 MS PET50-350E/46-65DWG 6

76751S 3M TT3 MS PET50-350E/46-65WG 6

7730FL none 12

7732FL none 12

7808E 3M TT3 MS PET50-310E-90WG 6

7810E 3M TT3 MW PET50-300E-65WG 4

7810EH 3M TT5 MW PET50-300E-90WG 4

7813E 3M TT3 MS PET75-300E-90WG 6

7815E 3M TT1 MW PET50-310E-65WG 4

7815EB 3M TT5 MW PET50-310E-65WG 4

7815EH 3M TT5 MW PET50-310E-90WG 4

7816E 3M TT2 GW PET50-310E-65WG 4

7816EC 3M TT2 GW PET50-310E-65DWG 4

7816EH 3M TT2 GW PET50-310E-90WG 5

7818E 3M TT1 MS PET75-310E-90WG 6

7818EH 3M TT5 MS PET75-310E-90WG 6

7860E 3M TT2 GW PET50-300E-65WG 5

7861E 3M TT2 GC PET50-300E-65WG 5

7861EH 3M TT2 GC PET50-300E-90WG 5

7868E 3M TT2 GW PET50-350E/20-65WG 5

7870E 3M TT0 MW PET50-350E-90WG 9

7871EC 3M TT2 GW PET50-350E/46-65DWG 5

7871EJ 3M TT2 GW PET50-350E/46-90DWG 5

7872EC 3M TT2 PS PET50-350E-46-65DWG 6

7872EJ 3M TT2 PS PET50-350E/46-90DWG 6

7874EC 3M TT3 MW PET50-350E/46-65DWG 4

7875E 3M TT2 PS PET50-310E-65WG 6

7876EC 3M TT2 GC PET50-350E/46-65DWG 5

7879EJ 3M TT3 MS PET75-350E/46-90DWG 6

8000E none 8

92200 3M TT2 GW PET50-SE100/65-65DWG 3

C11CI OL GLOSS PET 23/HP100/72WK 12

C22CI OL MATT PET 23/HP100/72WK 12

D84YB Platinum SILVER PET50-250E-65WG 6

D85YB PEARL WHITE PET50-250E-65WG 5

G34YH TRANSCAN PT50 MS VOID-HP250-90WG 10

G35C3 TRANSCAN GLOSS CLEAR PET-25/HP100/90LK 5

G35CC TRANSCAN GLOSS CLEAR PET-25/HP100/65DWG 5

G61SB MATT WHITE PET 50-250E-65WG 4

G62SB MATT SILVER PET50-250E-65WG 6

H00CH C.I.SILVER PET 50-A/HP100/90WG 6

H01CH C.I.WHITE PET 50-A/HP100/90WG 4

H10C3 C.I.SILVER PET 50-B/HP100/90LK 6

H10CH C.I.SILVER PET 50-B/HP100/90WG 6

H11C3 C.I. WHITE PET 50B/HP100/90LK 4

H11CH C.I.WHITE PET 50-B/HP100/90WG 4

H11P3 C.I. WHITE PET50-B/R185/90LK 4

H12C3 C.I. CLEAR PET 25-B/HP100/90LK 5

H12CB C.I.CLEAR PET 25-B/HP100/65WG 5

I00Y3 LASERPRINT PT50 MT SILV/HP250/90LK 14

I03Y3 LASERPRINT PT50 MATT YELLOW/HP250/90LK 14

Product Description Page Product Description Page

Product: Appearance: Description:

TT1

Top-coats

Top-coats andAdhesives

cUL approved. General-purpose thermal transfer printable top-coat(Can also be dot matrix printed with a suitable ribbon or laser toner printed)


Matt

TT2 cUL approved. General-purpose thermal transfer printable top-coatGloss

TT3 cUL approved. High durability and chemical resistant thermal transfer printable matt top-coatfor automotive (brake fluid resistant) and other demanding applications. Excellent UV resistance.Matt

TT4 cUL approved. Outdoor UV-resistant thermal transfer printable matt top-coat.Also printable by laser toner printers and some dot matrix ribbons.Matt

TT5 cUL approved. Premium quality thermal transfer and flexographic printable matt top-coat.Can be thermal transfer printed at lower heat settings on many printers , thus extending print head life.Matt

LT1 Not cUL approved with laser toner. General purpose laser toner printable top-coat.Also printable by some thermal transfer printers and also some dot matrix ribbons.Matt

TCA Top Coat A ‘’Computer Imprintable’’ - cUL approved. General-purpose thermal transfer printable top-coat(Can also be dot matrix printed with a suitable ribbon or laser toner printed) Matt

TCB Top Coat B ‘’Computer Imprintable’’ - Outdoor UV-resistant thermal transfer printable matt top-coat.Also printable by laser toner printers and some dot matrix ribbons.Matt

AR

GlossTC9

3M’s most durable top-coat. Thermal transfer printed image is resistant to mostchemicals, including Acetone, when used with the appropriate thermal transfer ribbon.Matt

A clear, high gloss top-coating, designed to provide a printable surfacefor screen printing inks and flexo inks.

Selected products show the top-coat as “TT0”, “Print-treated” or simply “top-coated” – this indicates either a general-purpose top-coat has been applied, or a print treatment has been applied to thematerial face to aid both conventional and/or variable data printing.

25

Product: Thickness: Description:

100

Adhesives

High temperature acrylic adhesive. Up to 232°C short-term heat resistance and excellentsolvent resistance. High peel strength. Exceptional shear strength. Low outgassing.

ApplicationTemperature:

ServiceTemperature:

> 10°CVariable – tocustomer requirement

150 > 10°C -40°C to +232 °C Variable – tocustomer requirement

200 High performance acrylic adhesive. Up to 177°C short-term heat resistance and mediumsolvent resistance. Excellent peel strength on HSE plastics and metals. Good long-term ageing. > 10°C -40°C to +177 °C

Variable – tocustomer requirement

241E High performance acrylic adhesive. Aqueous acrylic, designed for applications requiringexcellent wet adhesion and cold adhesion. BS5609 approved for drum labelling. > 5°C -20°C to +70 °C


250E Acrylic adhesive. This adhesive has lower initial peel, but comparable adhesion to both 300and 300E adhesives. A firmer adhesive than 300 and 300E, resulting in less ooze. > 10°C -40°C to +150 °C


300 High strength acrylic. Up to 121°C short-term heat resistance. Greater initial adhesion,especially to LSE plastics. Quick flowing for application to textured plastics and powder-coats. > 10°C -40°C to +121 °C


300E High strength acrylic. This adhesive is designed for applications requiring greater initial adhesion, especially to LSE surfaces and powder-coats, without loss of shear or temperature resistance. > 10°C -40°C to +150 °C


310E High precision acrylic. Excellent UV resistance. This adhesive provides firmness and highprecision strength on a variety of surfaces, including HSE plastics, glass and metals. > 10°C -40°C to +150 °C


320 High tenacity acrylic. This adhesive is designed for applications requiring high bond strength on a variety of surfaces, including HSE and LSE plastics. Excellent flagging resistance on small diameters. > 10°C -40°C to +121 °C


High temperature acrylic adhesive. Up to 232°C short-term heat resistance and excellentsolvent resistance. High internal strength – ideal for applications to HSE plastics and metals.

-40°C to +232 °C

26

Product: Thickness: Description:

350E

Adhesives

High holding acrylic. This is a modified acrylic adhesive, designed for very high bond strengthto most surfaces. Excellent holding strength, even at high temperatures.

ApplicationTemperature:

ServiceTemperature:

> 10°C -40°C to +150 °C Variable – tocustomer requirement

400 Low temperature acrylic. Good low temperature performance and peel strength on manysurfaces. Clarity and UV resistance for window label applications. > -12°C -51°C to +121 °C


450E Low cost acrylic. This adhesive is designed as a medium-performance adhesive for applicationto a variety of indoor substrates. Resistant to moisture and occasional exposure to water. > 5°C -20°C to +70 °C


550 Permanent / removable bond acrylic. Because the adhesive level neither builds or degrades overtime, it will remove cleanly from most HSE substrates. Excellent for electronics applications. > 10°C -40°C to +120 °C


1000 Repositionable acrylic. Good holding to many surfaces. Clean removal or numerous re-applications.Stain resistance on many surfaces. > -15°C -30°C to +121 °C


SE100 Modified synthetic elastomer, series SE100 for ultra high bond strength & high performance bonding to composites & many other LSE substrates > 15°C -40°C to +130 °C


HP100 Acrylic adhesive. This adhesive is a general purpose, UV stable adhesive. UL and cUL approved.For use on metal, painted or HSE surfaces. > 10°C -40°C to +150 °C


HP250 Acrylic adhesive. UV stable. Comparable adhesion to 3M 300 and 3M 300E adhesives.Initial tack is low, but the adhesion strength builds, making it suitable for many plastic surfaces. > 10°C -40°C to +150 °C



R185 > 10°C -40°C to +150 °C Variable – tocustomer requirement

General purpose solvent acrylic removable adhesive with good initial tack and goodremovability from a wide range of substrates.

OSA-2 Acrylic adhesive. This adhesive is a general purpose, UV stable adhesive. For use on metal, painted or HSE surfaces. > 10°C -20°C to +70 °C


3M EuropeHermeslaan 7B-1831 DiegemTel. +32 2 722 45 50Fax +32 2 722 45 [email protected]

3M Converter Markets Department123, Johnstone AvenueHillington,Glasgow G52 4NZ, ScotlandTel. +44 141 891 4302Fax +44 141 891 4319

Please recycle. Printed in UK.© 3M 2008. All rights reserved.

3M is a trademark of 3M Company

Important Note to Purchasers:This technical information and data should considered representative or typical only and should not be used for specification purposes. The information is intended as aguideline only. Users should carefully evaluate products or their application. This information refers to a selected range of 3M Label Materials. Contact us for details of our Full Range.

performance label materials - sp-sys.it · for more than fifty years, 3m industrial adhesives,...

Documents