philips rola storage systems catalogue

PRODUCT GUIDEEDIT ION 2

ROLA•CASE‘s purpose built manufacturing

facility at Somersby NSW, incorporates a

comprehensive showroom, install service, and

computer aided design and manufacturing

capabilities. Combined with experienced staff

that understand and recognize today’s vehicle

storage needs.

IntroductionThe ultimate in vehicle and mobile storage systems.

Our service offers a full install, including drawer systems,shelving, cabinets, cargo barriers roof racks (commercial &sports), flooring, steps, tow bars etc. plus custom build whererequired.

These systems provide the ultimate solution in storage for tradesmen, technicians and service requirements. Suitable for all enclosed vehicles.

Designed and manufacturered in Australia by Thomas Moloney Pty Ltd, 27 Kangoo Road, Somersby NSW 2250Phone: +61 2 4340 1444 1300 650 719 Fax: +61 2 4340 1400 Email: [email protected] Web: www.rolacase.com


Vehicle storage systems for efficiency-conscious trades

RSSFR/40 4 Series start frame

RSEFR/40 4 Series extension frame

RSSFR/80 8 Series extension frame

RSRM/1 Roof mount shelf

RSEFR/HD/120 12 Series Heavy Duty extension frame

RSGAC/41 Vented gas cabinet, small & flammable store

RCSK6/C Rola Case cabinet kit (case selection on page 13)

RSFLE/40 Floor enclosure with removable front angle

RSSHL/43 High mount shelf with three RP25 plastic bins

RSSHL/44 High - Mid mount shelf with 1x RP120 plastic bin

RSSHL/45 Mid mount shelf with 4x RP100 plastic bins

RSSHL/46 Low mount shelf with 2x plastic bins

RSGBH/41 Gas bottle holder (gas bottles not included)

RSLBX/81 Lockable box mounted vertically in 4 Series orhorizontally in 8 Series frames.

RSCDH/41 Adjustable cable drum holder

RSSHL/83 High mount shelf with 6x RP25 plastic bins


RSLBX/82 Lockable box mounted horizontally in 8 Series or vertically in 4 Series frames.

RCDK 3-2 Rola Case kit with RSBAR support bar

RSFLE/81 Floor enclosure with removable front angle (buckets not included)

RSCAB/81 Large 3 shelf cabinet with space-saving contoured body

RSSHL/86 Floor mount shelf with 2x RP240 plastic bins (plastic dividers notincluded)


RCDK 5-4/C Rola Case kit with 2x RC5D doors

RSSHL/87 Mid-mount shelf with 2x Rola Cases

RSCDH/81 Adjustable cable drum holder (cable drums not included)

RSSHL/123 High mount shelf with 9x RP25 plastic bins



RSSHL/126 Floor mount shelf with 3x RP240 plastic bins (plastic dividers notincluded)

1539mm

420mm420mm

25mm

420mm840mm

840mm

Note: the display above doesn't include all products featured in this catalogue and is for illustration purposes only. The heights and componentarrangements are adjustable for varying vehicles types and customer requirements. Check the catalogue for your other specific storage needs.Disclaimer: If any product is installed incorrectly or used in an incorrect manner, no liability will be taken for product malfunction or personal injury.

tube width25mm

1

cut at25mmintervals

1 22 3 34

6

7

8

9

10

9

10

11

12

13

14

15

16

17

18

19

20

21

22

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

w w w . r o l a c a s e . c o mw w w . r o l a c a s e . c o m

and service businesses

The configuration of shelves and plastic bins depicted

above allows for storage of large, medium and small

components typical of today’s tradesman and technician’s

requirements. ROLA•Shelf will fit all modern vehicles

where shelving is required; commercial vans, canopy

enclosures, 4WDs and station wagons.

840mm

1260mm

25mm

tubewidth25mm

2

ROLA•CASE - Cabinet storage options

3 5

16

23

24

25

26

27

28

29

29

30

30

w w w . r o l a c a s e . c o m 3

ROLA•Shelf consists of 3 types - the 12, 8and 4 Series and the choice of 5 shelves,cabinets, lockable boxes, cable drum holdersetc. The 12 and 8 Series are the standard withthe 4 Series fitting where insufficient spaceexists for a 12 or 8 Series. The 8 and 4 Seriesalso house the ROLA•CASE Storage system.

The shelving consists of high, mid, low andfloor mount shelves. These shelves will allowfor a selection to fit all modern trades andtechnician vehicles.

As the three sizes of frames are all compatible,you can add on to and build the shelvingsystem as your demands require. AllROLA•Shelf products are supplied with thenecessary fixing components andcomprehensive instructions for DIY assemblyand installation. (However, we do recommendinstallation to be done by an approved dealerwho offers an installation service.)

Modern mid and high roof vehicles will accept6 - 7 shelves either in single or dual postframes at 1539mm per 12, 8 and 4 Seriesframe. For standard height vehicles check kitson page 10 and 11.

See page 7 for end panels

and accessories

Heavy DutyWorkbench.

Available in 12and 8 Series

frames.

ROLA•CASE storage systems offer a rangeof storage options including a number ofdifferent trolley units.

ROLA•CASE is designed to give users themaximum in space saving capabilities with avariety of compartment sizes. Optional extras likethis small tray insert with adjustable compartmentsallow storage of the smallest micro components.

ROLA•CASE Metal Bearingsavailable x4 per drawer for heavyduty wear-and-tear and loading.See page 18 for further info.

RCTRYMicro Storage


12 Series12 Series start frame.Construction: - Vertical post 25 x 25 x 1.6

mm sq. tube. Cut at 25mmintervals for varying vehicleheight to 825mm.

- Horizontal 25 x 18 x 3mmangle.

- All components zinc annealed& powder coated, completewith instructions and mountinghardware.

RSSFR/120

12 Series extension frame.Construction as perRSSFR/120.All components zincannealed and powdercoated, complete withinstructions and mountinghardware.

RSEFR/120

1539

mm

825m

m

1310mm 1285mm

1539mm825m

m

4

RSSHL/123

High mount shelf.Height: rear 90mm / front 45mm. Length: 1259mm.Width: 230mm. Holds 9x RP25 bins.

All products below zincannealed, powder coatedand or galvanized. MetalGauge 0.9 to 1.9mm.

Medium plastic bin. 220 x 130 x 125mm 1 compartment

RP25RSSHL/124

Mid mount shelf.Height: rear 90mm / front 45mm. Length: 1259mm.Width: 255mm. Holds 3x RP120 bins.

Large plastic bin. 410 x 270 x 160mm. 3 compartments

RP120

RSSHL/125

Low mount shelf.Height: rear 90mm / front 45mm. Length:1259mm. Width: 305mm. Holds 12x RP100 bins.

Small plastic bin. 300 x 100 x 100mm. 3 compartments

RP100RSSHL/126

Floor mount shelf.Height: rear 168mm / front 80mm. Length:1259mm. Width: 405mm. Holds 3x RP240 bins.

Extra large plastic bin. 410 x 440 x 215mm. 1 compartment

RP240

RSWB/120

Mid mount work bench. 1.9mm galvanized steel. Width 1259mm, Depth 400mm, Height at back 55mm.

Lockable box for 12Series shelving. Boxconstruction: 0.9 and1.1mm zinc annealedand powder coated.Width: 1259mm. Depth: 400mm. Height: 419mm.

Optional vertical mounting in 4 Series frame.

Optional vertical mounting in 4 Series frame.

RSLBX/122

RSSHL/127 RSLBX/121

Mid mount shelf.Height: rear 90mm / front 25mm. Length: 1259mm.Width 377mm. Holds 3x RC001 Rola Cases.

See page 15 for case details

Lockable box for 12Series shelving. Boxand shelvingconstruction: 0.9 and1.1mm zinc annealedand powder coated.Width: 1259mm. Depth: 400mm. Height: 419mm.

RC001

12 Series Heavy Duty framing available. See page 7.

RSSHL/84RP120

Mid mount shelf.Height: rear 90mm / front25mm. Length: 839mm.Width: 240mm. Holds 2xRP120 bins.

Large plastic bin. 410 x 270 x 160mm. 3 compartments

RSSHL/83

High mount shelf.Height: rear 90mm / front25mm. Length: 839mm.Width: 200mm. Holds 6xRP25 bins


Lockable box for 8 series shelving. Dimensions: Width 839mm, Depth 400mm, Height 419mm. Holds 10 x RP100 bins.Optional vertical mounting in 4 series frame

Large Lockable Cabinet with 3 fixed shelves. Designed to fitabove wheel arch and contoured for vehicle. Dimensions: Width: 839mm, Depth: 460mm, Height 905mm

FIXED SHELF

FIXED SHELF

FIXED SHELF

8 series start frame.Construction:- vertical post 25 x 25 x 1.6

mm sq. tube. Cut at 25 mmintervals for varying vehicleheight to 825 mm.


- All components zinc annealed& powder coated, completewith instructions and mountinghardware.

RSSFR/80

8 series extension frame.Construction as perRSSFR/80. All components zincannealed and powdercoated, complete withinstructions and mountinghardware.

RSEFR/80

8 Series

RP25RSSHL/85

RP100

Low mount shelf.Height: rear 90mm / front45mm. Length: 839mm.Width: 305mm. Holds 8xRP100 bins.

Small plastic bin. 300 x 100 x 100mm. 3 compartments

RSSHL/87

Low mount shelf.Height: rear 90mm / front 25mm.Length: 839mm. Width 377mm.Holds 2x RC001 Rola Cases.

RSSHL/86

Floor mount shelf.Height: rear 168mm / front80mm. Length: 839mm.Width: 405mm. Holds 2xRP240 bins.

Extra large plastic bin. 410 x 440 x 215mm. 1 compartment

See page 15for case info.

RP240RSCDH/81

RC001

Adjustable diameter cable drum holder for 8 Seriesshelving. Dimensions: Width 839mm. Depth 370mm.Height 170mm

RSLBX/81

RSCAB/81

RSLBX/82

RSFLE/80

Floor mount enclosure with removable front angle & strap.Ideal for large bucket. Dimensions: Width 839mm,Depth 300mm, Height 275mm.

Mid mount work bench. 1.9mm galvanized steel. Dimensions: Width 839mm, Depth 400mm, Height atback 55mm.

RSWB/80

1539

mm

825m

m

890mm 865mm

1539mm825m

m

All products below zincannealed, powder coated andor galvanized. Metal Gauge0.9 to 1.9mm.

8 Series Heavy Duty framing available. See page 7.


Lockable box for 8 series shelving. Dimensions: Width 839mm, Depth 400mm, Height 419mm. Optional vertical mounting in 4 series frame


4 Series

RSSHL/43

High mount shelf.Height: rear 90mm / front 25mm. Length: 419mm. Width: 200mm.Holds 3x RP25 bins

RP25 RP120

4 Series Start Frame.Construction:- vertical post 25 x 25 x 1.6

mm sq. tube. Cut at 25 mmintervals for varying vehicleheight to 825 mm.


- All components zincannealed & powder coated,complete with instructions &mounting hardware.

All products below zincannealed, powder coated andor galvanized. Metal Gauge0.9 to 1.5mm.

RSSFR/40

4 Series Extension Frame.Construction as per RSSFR/40. All components zinc annealed &powder coated, complete withinstructions and mountinghardware.

RSEFR/40

1539

mm

825m

m

470mm 445mm

1539mm825m

m

RSSHL/44 RSSHL/45

Plinth or 4 seriesmounted, small gasbottle or dangerousgoods store.Includes exteriorventing, rubberinserts, adjustablestraps for securingvarying sizecontainers. Width 419mmDepth 310mmHeight 445mm

Mid mount shelf.Height: rear 90mm / front 25mm.Length: 419mm. Width: 240mm.Holds 1x RP120 bins.

Small plastic bin. 300 x 100 x100mm 3 compartments

Low mount shelf.Height: rear 90mm / front 45mm.Length: 419mm. Width: 305mm.Holds 4x RP100 bins

6

RP100


Large plastic bin. 410 x 270 x160mm3 compartments

RSSHL/46

Floor mount shelf.Height: rear 168mm/ front 80mm. Length: 419mm. Width: 405mm.Holds 3x RP25 bins

RP240RSGBH/41 RSGAC/41

Plinth or 4 seriesmounted gascabinet. Ideal foroxy. acetylene or Dsize bottles. Includesexterior venting,rubber inserts,adjustable securingstrap & hose coilholder. Width 419mmDepth 310mmHeight 925mm

RSGAC/42

Gas bottle holder for oxy acetylene or small bottles.Includes rubber mat and strap. Dimensions: Width419mm, Depth 230mm, Height 420mm.

Extra large plasticbin. 410 x 440 x 215mm. 1 compartment

RSFLE/40

Floor mount enclosure with removable front angle &strap. Dimensions: Width 419mm, Depth 300mm,Height 240mm.

Gas bottle holder adjustable for gas bottles up to350mm diameter. Includes rubber mat and strap. Dimensions: Width 419mm, Depth 230mm,Height 420mm.

RSGBH/42

RSCDH/41

Adjustable diameter cable drum holder for 4 Seriesshelving. Dimensions: Width 419mm. Depth 370mm.Height 170mm

The ROLA•ShelfHeavy Duty Frameshave beenconstructed for thosewho require a morerugged and durableshelving system tomeet their storageneeds. This HeavyDuty system isavailable for both the12 and 8 Seriesshelving and offersimproved supportand strength.

Construction: Vertical posts 25 x 25 x 1.6mm sq. tubes cut at 25mm intervals for varying vehicle heights. Other framing components from 3mmgalvanized or powder coated steel. Heavy duty frames are supplied with all necessary fixing components and comprehensive instructionsfor DIY assembly. (However, we do recommend installation to be done by an approved dealer who offers an installation service.)

RSSFR/HD/12012 Series Heavy Duty Start Frame. Width: 1310mm

RSSFR/HD/808 Series Heavy Duty Start Frame. Width: 890mm

RSEFR/HD/12012 Series Heavy Duty ExtensionFrame. Width: 1285mm

RSEFR/HD/808 Series Heavy Duty ExtensionFrame. Width: 865mm

Heavy Duty Frames


RSPEP/L

RSPEP/EX RSPEP/EX

RSPEP/R

End panels and accessories

1025

mm

1593

mm

180m

m

460mm

RSPEP/HK

Lead Hook - Holdsextension leads,hoses, etc.

End Panel. Construction:1.1mm zinc coated steelHeight 1020mm, Width460mm. All fixing componentsincluded.

End panel Extension. Add universalextension panel to fit vehicle height /application. Construction: 1.1mm Zinccoated steel Height 180mm, Width460mm.

RSPEP/MH

Tool Rack - holds toolsof different shapes andsizes.

RSPEP/TY

Tool Tray – holdsloose tools and / orequipment.

The ROLA•Shelf range of perforated end panels and accessories further improvesyour space saving and storage capabilities. The ROLA•Shelf End Panels can befitted to either end of the 12, 8 or 4 Series shelving units and can be customized with theaccessories in any arrangement as required by the user. All accessories are zinc sealedand powder coated.

Water Bottle Holder –comes with 10L JerryCan.

Extendable tap – For quickclean up / rinsing. To befitted anywhere belowWater Bottle Holder viaflexible hose.

RSPEP/WBH

Heavy DutyFraming

cut at25mmintervals

Small FireExtinguisherwith housingcompatiblewith EndPanels.

RSPEP/FE

RSPEP/TAP


RS/RS

Galvanized Rear Step. Illustration depicts Toyota Hi-Ace step (other vehicletypes available).

RSBAR

RSBAR/12

Mounting bar for ROLA•CASE Dual Framesand Dual Kits to fit within 8 series frames.

To support 12 series shelves whereadditional loading may occur. (Excessiveloading may result in product failure and

will void product warranty - consult adealer / manufacturer)

RSRM/1

Roof Mount Shelf with felt inlay, foam end inserts and Velcro straps. Construction: 1.1mm zinc sealed and powder coated. Width 200mm, Length 1820mm, Height 60mm. To fit above ROLA•Shelf frame.

RSJCH/2

Double Jerry Can HolderDimensions:Width 360mmDepth 385mmHeight 390mm

RSJCH/3

Triple Jerry Can HolderDimensions:Width 540mmDepth 385mmHeight 390mm

RSCAB/RSFloor mount lockablecabinet with rolling shutterdoor - will also fit 8 SeriesROLA•Shelf frame.Provides a higher level ofsecurity for cargo/goods. Contoured to fit vehicle. Dimensions:Width 839mmDepth 475mmHeight 1240mm

RSRM/2

Roof Mount Shelf with Velcro straps for long levels, rulers, etc.Construction: 1.1mm zinc sealed and powder coated. Width 200mm,Length 1820mm, Height 60mm. To fit above ROLA•Shelf frame.

RSGBH/9KG

9kg Gas Bottle Holder. Comeswith vibration insert, rubberpinch-weld and strap. Floormount.Dimensions:Width 375mmDepth 335mmHeight 295mm

INSTALLATION KIT/PACKAGING

All products are packaged and supplied completewith comprehensive do it yourself (d.i.y.) instructions, orask your local distributor for a complete install service.

8

Specialist products

w w w . r o l a c a s e . c o m

1. RSRB/CR1Cant rail reinforcement angle for a Toyota Hi-Ace.

2. RSRB/VBVibration bracket reinforcement.

3. RSRB/CR2Universal cant rail reinforcement bracket.

4. RSIBHorizontal inertia bracket.

ROLA•Shelf ANCHORAGE REINFORCEMENT

Specialist products

Optional combination lockavailable for all cabinets.Simple and quick operation -tamper proof.

COMBINATION LOCK

Security Screen for added property protection. To fit the rearwindow of a Toyota Hi-Ace Van. Other vehicle types available.

RSWSC/TRW

Security Screen for added property protection. To fit the sidewindow of a Toyota Hi-Ace Van. Other vehicle types available.

RSWSC/TSD

Full Cargo Barrier

RSVICESeparate vice with100mm jaw.

RSSLDVSliding vice assemblywith 800mm travel.

RSFTH/1

Vertical Fluorescent Tube Holder.Holds all standard tubes up to36W. Comes complete withVelcro security straps and foamcushion.Dimensions:Width 160mmDepth 160mmHeight 1250mm

9

Our complete range of cargo barriers andsecurity screens for commercial and passengervehicles offers further solutions for today’straveling tradesmen and technicians. The rangeincludes end barriers which are able tointegrate with the ROLA•Shelf range, acargo barrier and also security screens forproperty protection within the vehicle.

The end barriers below are able to integratewith the ROLA•Shelf range of frames.

End Barrier. 3/4height to fit end ofROLA•Shelfframe.

CARGO BARRIERS

RSEB/1

End BarrierAble to fasten oxy acetylene orsimilar sized bottles. To fit end ofROLA•Shelfframe.

RSEB/2

End BarrierComes with strapto hold stepladders etc. and is reversible forboth sides ofvehicle. To fit end ofROLA•Shelfframe.

RSEB/3

845mm

1140mm

1140mm

375mm

375mm 375mm

1

2

3

4

RSKIT/1 RSKIT/2

RSKIT/3 RSKIT/4


KitsThe complete answer to vehicle shelvingThe ROLA•Shelf RSKIT range of pre-configured vehicle shelving kits offer anindicative variety of storage choices andbudgets for plumbers, electricians andservice technicians to suit most modernvehicle types.

Our trained sales team and nationallyappointed distributors will interpret your

vehicle storage requirements and will beable to offer a range of Cabinets,Shelves and Drawer Systems that willprecisely meet your vehicle storage needsand ensure you are full equipped toservice your customers.

All of the RSKIT range of shelving will fitwithin most late model vehicles e.g. the

Toyota Hi-Ace and alike vehicles.Alternatively, a ROLA•Shelf kit can becustomized to fit your vehicle orapplication. - Ask your local dealer forfurther info.

To fit Toyota Hi-Ace or similar height vehicles

10

1755mm

1250

mm

1250

mm

1250

mm

1250

mm

2175mm

1755mm

2175mm

KitsIncluded in our service are heavy duty roof racks, cargo barriers, oil & acid resistant rubber and timber flooring,plus a host of vehicle accessories needed for today’s service vehicles.

RSKIT/5 RSKIT/6

To fit Toyota Hi-Ace or similar height vehicles

RSKIT/7

RSKIT/8 RSKIT/9 RSKIT/10


1250

mm

1250

mm

1250

mm

1250

mm

1250

mm

1250

mm

890mm

890mm 890mm 890mm

890mm 470mm

Designed and manufacturered in Australia by Thomas Moloney Pty Ltd, 27 Kangoo Road, Somersby NSW 2250Phone: +61 2 4340 1444 1300 650 719 Fax: +61 2 4340 1400 Email: [email protected] Web: www.rolacase.com12

KitsCase solvedROLA•CASE offers an easy selection of kits to suit your storageneeds and are suitable for individual use, or can be addedvertically or horizontally at any time as your storagerequirements demand.

ROLA•CASE will integrate with the ROLA•Shelf units for further optional applications.

With the RCSK kits fitting the 4 Series ROLA•Shelf

And the RCDK kits fitting the 8 Series ROLA•Shelf

RCSK2 RCSK3 RCSK4 RCSK5

RCSK6 RCSK7 RCDK3

RCDK4 RC7KM

RCDK3/4 RCDK5/4 RCDKM/EN

RCDK2

RCDK3/2 RCDK5


Kits

13

Case closedOur ROLA•CASE cabinet kits offer an alternative to your ROLA•CASEstorage needs. These cabinet kits are able to be fitted with lockable doorsand shelves and can be joined vertically and / or horizontally to createnearly any modular configuration (an example of this unit is on page 2).

Note:Doors are also available for the cabinet kits – See page 18 for further info.(Supplied as depicted – no doors are included with kits. Order separately).

Cabinet systems (shown left) are also available. All cabinets fit 4 and 8 SeriesROLA•Shelf .

All kits join vertically and horizontally.

RCSK4/C RCSK6/CRCSK3/C RCSK5/C

RCDK4/C RCDK3-2/CRCDK3/C RCDK5/C

RCDK3-4/C RCDK7M/CRCDK5-4/C

RCSK7PN/CRCSK7/C RCSK7M/C

RCSK2/CRCSK1/C

RCDK2/C


Find Your Solution, Case by Case.ROLA•CASE is a versatile storagesystem for the transfer and handling ofcomponents, tools and instruments.

The range includes Mobile Work Stationsthat allow the movement of tools andequipment in a workshop or servicearea, plus the Drawer systems which areideal for vehicle and static use. TheDrawer systems are also compatible withthe ROLA•Shelf vehicle storage system.

The Mobile Work Stations are availablein 3 choices. The dual mobileRC7DC/DM, and the single mobile

RC7DC/SM, which are both suitable for continuous floor use, and theRC7DC/PN with pneumatic tires. TheRC7DC/PN is suitable for stairs anduneven terrain like building sites, highrise and situations where distance andmobility are a factor. The Drawer systemsoffer an extensive selection of storagesolutions that allows further expansionhorizontally and or vertically when yourstorage needs arise.

The choice of cases and accessories willallow for storage of the smallest micro

components through to power tools andcordless equipment. A selection ofDrawer kits to meet your storage needs ison page 12 and 13, or custom buildfrom our Drawer systems on page 16and 17.

The cases are manufactured fromengineering polymers, ABS,Polycarbonate and Nylon 66. They aremolded with a 3 – 5mm wall section anduse stainless steel for the hinge and latch-spring to ensure extended product life.

14

RC001

20 adjustable compartments, 1 tool compartment infront of case. Dimensions: Width 370mm, Depth370mm, Height 85mm

RC001/CL

20 adjustable compartments, 1 tool compartment infront of case. Polycarbonate lid. Dimensions: Width370mm, Depth 370mm, Height 85mm

RC002/CL

1 large compartment (will take RCFIS/2), 1 toolcompartment in front of case. Polycarbonate lid.Dimensions: Width 370mm, Depth 370mm,Height 85mm

RC003

1 large tool compartment, plus 3 compartment lift-outtray and with further compartments below, withcapability to be divided by 4 with divider RC003/D(will take RCFIS/3). Dimensions: Width 370mm, Depth 370mm, Height 130mm


ProductsRC002

1 large compartment (will take RCFIS/2), 1 toolcompartment in front of case. Dimensions: Width370mm, Depth 370mm, Height 85mm

RC003/CL

1 large tool compartment, plus 3 compartment lift-outtray and with further compartments below, withcapability to be divided by 4 with divider RC003/D.Polycarbonate lid (will take RCFIS/3). Dimensions:Width 370mm, Depth 370mm, Height 130mm

RC003/QK

1 large compartment, plus 3 compartment lift-out trayand with further compartments below, 1 toolcompartment. Includes Quik Kit (QK001) Dimensions:Width 370mm, Depth 370mm, Height 130mm

10 small compartments, 1 large tool compartmentin front of case. Also available in clearQK001/CL Dimensions: Width 310mm, Depth210mm, Height 50mm

Small tray with 4 adjustable compartments. Suits RC001series cases. Includes new clear micro component storageunit. 2 per carton. Dimensions: Width 70mm, Length143mm, Height 75mm.

RCTRY

RC003/D

Dividers to suit RC003 cases. Each caseholds max. 3 dividers.

RCFIS/2 and RCFIS/3

Foam insert. RCFIS/2 to fit RC002 Series cases.RCFIS/3 to fit RC003 Series cases.

SPARE PARTS

RCBKE/2

Holds 2 xRC003 cases.Includes rubbermat and strap.

Dimensions:Width 380mmDepth 290mmHeight 290mm

RCBKE/3

Holds 3 xRC001 cases.Includes rubbermat and strap.

Dimensions:Width 380mmDepth 290mmHeight 290mm

RCVCH

Vertical Case Holder. Holds RC001, RC002 or RC003 seriescases. Ideal for wall or end panel mounting. Height 150mm,Width 370mm.

15

QK001QK001/CL

Joins drawer vertically.(Set of 4).

Divider for RC001 cases

RCJNR RCPLD


Drawer SystemsRC2FR

Holds 2 x RC001 orRC002 series cases.Dimensions: Width 419mm,Depth 460mm,Height 250mm

RC3FR RC3FR/2D

RC2FXHorizontalextension framealso available

Holds 3 x RC001or RC002 seriescases. Dimensions: Width 419mm,Depth 460mm,Height 350mm



RC5FX/4DHorizontal extensionframe also available

RC4FX/3DHorizontalextension framealso available.

Holds 2 x RC003series cases.Dimensions: Width 419mm,Depth 460mm,Height 350mm

RC3FX/2DHorizontalextension framealso available

Holds 5x RC001or RC002 seriescases.Dimensions: Width 419mm,Depth 460mm,Height 571mm


RC4FRHolds 4 x RC001or RC002 seriescases.Dimensions: Width 419mm,Depth 460mm,Height 460mm

RC4FR/3D RC5FRHolds 2 x RC003and 1 x RC001series case.Dimensions: Width 419mm,Depth 460mm,Height 460mm

RC7MB

Holds 7 x RC001or RC002 casesor combination ofRC001 & RC003cases.Dimensions: Width 419mm,Depth 460mm,Height 875mm

RC7DM/EN

Holds up to 14 x RC001 or RC002 seriescases or a combination of RC001, RC002& RC003 series cases. Dimensions: Width 830mm,Depth 460mm,Height 960mm (total).

Products

16

RC5FR/4D

Holds 2 x RC001 orRC002 and 2 xRC003 series cases.Dimensions: Width 419mm,Depth 460mm,Height 571mm

RCWCT/DT

Work top for dual frames. Comes complete with doublesided tape and fixing screws. Dimensions: Width 825mm, Depth 455, Height 8mm,Thickness 1.1mm

RCWCT

Work top for single frames. Comescomplete with double sided tape andfixing screws.Dimensions: Width 419mm, Depth445mm, Thickness 1.1mm


RC2DCHolds 2 x RC001 orRC002 series cases.Dimensions: Width 419mm,Depth 460mm,Height 230mm.

RC2 - cabinet only RC2D - door only

RC3DCHolds 3 x RC001 orRC002 series cases.Dimensions: Width 419mm, Depth 460mm, Height 325mm.


RC3DC/2DHolds 2 x RC003series cases.Dimensions: Width 419mm, Depth 460mm,Height 325mm.


RC4DCHolds 4 x RC001 orRC002 series cases.Dimensions: Width 419mm,Depth 460mm,Height 420mm.


RC4DC/3DHolds 2 x RC003and 1 x RC001series case.Dimensions: Width 419mm,Depth 460mm,Height 420mm.


RC5DCHolds 5 x RC001 orRC002 series cases.Dimensions: Width 419mm, Depth 460mm, Height 547mm.


RC5DC/4DHolds 2 x RC001 orRC002 and 2 xRC003 series cases.Dimensions: Width 419mm,Depth 460mm,Height 547mm.


RC7DC/PNTrolley with 220mmpneumatic tires. Idealfor stairs or unevensurfaces. Holds 7 xRC001 or RC002cases or acombination of RC001and RC003 cases. Dimensions: Width 419mm, Depth 540mm, Height 1000mm (total)

RC7 - cabinet onlyRC7D - door only

Holds 7 x RC001 orRC002 cases or acombination ofRC001, RC002 andRC003 cases.Dimensions: Width 419mm, Depth 540mm, Height 1000mm (total).


RC7DC/SM

Holds up to 14 x RC001 orRC002 cases, or acombination of RC001 andRC003 cases. Dimensions: Width 839mm, Depth 460mm, Height 960mm (total)(Shelf not included)

RC7D x 2 - door only

Nylon fiber insert to fit top of allDrawer Cabinets. Oil, Petrol andwater resistant. Width 410mm,Depth 455mm,Thickness 5mm

RCCITRC7DC/DM

ProductsDrawer Cabinets

Cabinet construction: 0.9 to 1.1mm zinc annealed and powder coated steel.


Drawer Cabinet Accesories

Pneumatic wheel kit for single modular mobilework station. Comes with 2 x 220mmpneumatic tires, 2x swivel locking wheels andall necessary bracing and fixing components.(Handles may be necessary.)

Products

18

RCWHL/PN

Shelf to fit ROLA•CASEcabinets. Shelf construction:0.9mm zinc annealed andpowder coated.

RCCS

Wheel kit for a dualmodular mobile workstation. Comes with 2xfixed wheels and 2x swivellocking wheels and allnecessary bracing andfixing components. (Handlesmay be necessary.)

RCWHL/DM

Wheel kit for a single modularmobile work station. Comes with2x fixed wheels and 2x swivellocking wheels and all necessarybracing and fixing components.(Handles may be necessary.)

RCWHL/SM

CARRIAGE ACCESSORIES

RCCRG/MG shown

RCCRG/MGCarriage Set - Colour: Millenium grey

RCCRG/0Carriage Set - Colour: Oyster

MB - Catalogue No. ExtensionCarriage Set roller upgrade to metalbearings (x4). Add to order perdrawer where required.Example purchase order:- RCDK5/MB-3 = RCDK5 with 3 heavyduty drawers.

- RC7DC/PN/MB-7 = RC7DC/PN with7 heavy duty drawers.

- RCCRG/O/MB = Oyster carriage setwith metal bearings

Handle to fit dualand single mobilekits.

Single mobile handle to fitpneumatic wheeled kits.

RCHDLT RCHDL

Plinth Feet. To fixcabinets to floor ofvehicle / stationaryposition. 4 per kitplus screws.

RCPLH RCJNR/C

RCCDT

Work top to fit dual ROLA•CASE cabinets. Construction: 1.1mm zinc annealed and powder coated.

Vertical joining bracket. For connectingROLA•CASE cabinets vertically. 4per kit plus screws.

ROLA•CASE cabinets are able to befitted with a door for added security. Eachdoor is 0.9mm zinc annealed and powdercoated with a 3-point locking mechanism(except RC2D and RC3D).

CABINET DOORS

Door to fit:RC2DCRCSK1/C

RC2D

Door to fit:RC3DCRC3DC/2DRCSK2/CRCSK3/CRCDK2/C (x2)RCDK3/C (x2)

RC3DDoor to fit:RC5DCRC5DC/4DRCSK4/CRCSK5/CRCDK4/C (x2)RCDK5/C (x2)RCDK5-4/C (x2)

RC5D

Door to fit:RC4DCRC4DC/3DRCSK6/CRCSK7/CRCDK3-4/C (x2)

RC4D Door to fit:RC7DC/PNRC7DC/SMRC7DC/DM (x2)RCSK7PN/CRCSK7M/CRCDK7M/C(x2)

RC7D


Rola roof racks

First aid kits

ROLA ROOF RACKS suit allcommercial vehicles withaccessories to secure all yourloading needs including ladders,conduit, etc. From the regular roofracks to the luggage boxes; wewill be able to assist in anyproblem where ROLA Roof Racksproducts are needed.

The full range is featured in acomprehensive catalogue whichincludes commercial and sporttype roof racks.

First Aid Kits for vehicles and other workplaces.

These first aid kits meet or exceed State or Territory prescribed regulations or Codes of Practice for Workplaces with less than 25 people (30 people for QLD,100 people for TAS & 50 people for SA). For Large Workplaces, Remote Locations or High Risk workplaces additional 1st aid material or kits may be required.Each workplace should conduct a risk and hazard assessment and consult with their employees to properly assess their specific first aid and OHAS requirements.

19

STATE FIRST AID FIRST AID FIRST AID REGULATIONSKIT NO. 1 KIT NO. 2 KIT NO. 3

NSW - B • For 1 to 24 employees at ‘Construction’ workplaces and 10 to 100 for ‘Other places of work’ (not vehicle / construction)

VIC • For workplaces with less than 25 people*

TAS • 1 kit per hundred employees

QLD • For workplaces with less than 30 people (low risk)*

NT • For workplaces with less than 25 people*

SA • For workplaces with less than 50 people

WA • For workplaces with less than 25 people

Comcare B • Nation wide - For workplaces with more than 10 and less than 100 people (not high risk - OH&S Code of Practice 2008)

CAT NO. RCFAK1 RCFAK2 RCFAK3

• Select for state regulations.

* Workplace Risk & Hazard assessment requiried (Recommended for all).

Some of our current users:

• Australian Antarctic Base

• Australian Volunteer Coastguard

• Cadbury Schweppes

• Energy Australia

• Lürsen Yachts/Ships - Germany

• Qantas - maintenance

• Exported to Europe & New Zealand

27 Kangoo Road, Somersby NSW 2250 Phone: +61 2 4340 1444 Fax: +61 2 4340 1400Email: [email protected] Web: www.rolacase.com

philips rola storage systems catalogue

Documents