®CADISON Pipe Support Modeler

®CADISON Pipe Support Modeler

Pipe Support Modeler assists the user to create and edit ?Goal Post

the secondary supports in an easy and intelligent manner. ?Inverted Goal Post

Assistant Secondary Support features enable the user to ?Cantilever

create multiple and different types of supports from ?Braced Cantilever

predefined supports. A user-friendly GUI provides flexibility ?T Post

by allowing the user to create variations in predefined type of ?L Post

supports during the data entry stage for e.g. offset, ?Inverted L Post

orientation and industry validations. Supports created using ?Extended Goal Post

‘Create Support’ wizard are both constructible and erectable. ?Inverted Extended Goal Post

?Fixed Beam®

?Introduced new CADISON object type for secondary

support assembly. Profile Orientation Inbuilt intelligence in profile orientation

?Seamlessly integrated into 3D Designer workflow, can be options provides flexibility to create multiple types of

used for Cable trays and Ducting supports as well. supports by changing the orientation of horizontal and

?Use of MATPIPE catalog for structural profiles. vertical members. It also validates the combination of profile

?Auto linking to standard supports helps in ease of orientation based on the support & profile type selected in

indication in isometric drawings. the GUI.

?Eliminate need of using X-ref AutoCAD drawings & manual

work in tracking, linking to standard supports. Offset feature enables users to shift horizontal profile to

?Multiply productivity with save and load configuration support welding and additional flexibility to position

feature to replicate supports, edit feature to modify horizontal member to suite various position requirements.

existing support.

?Customized reporting and tagging feature can be used on An intelligent GUI validates and enables valid orientations of ®secondary supports in CADISON Project module. horizontal and vertical profiles as per the selected support &

?Can select different profiles for horizontal, vertical profile type for horizontal, vertical members.

members. Can select orientation to suite requirement.

?Option to create support with or without base plate, user Insertion Points Additional insertion points at structure level

can select the base plate from available catalogs in provide better placement and alignment in 3D environment.

MATPIPE. These are consistent irrespective of type of profile used as

?Intelligent design validation in GUI avoids creation of they are implemented at support level and easy to align with

irregular / invalid supports. pipe/foundation/support surface etc. Edit Secondary Support

feature will honor the insertion point selected by user at the

Support Types The user can select type of support from time of placement and recreate the structure as per updated

various predefined types available. Based on selection of type parameters to save time in updating the existing structure to

of support, corresponding illustrative image are displayed on revise as per the revised parameters entered in wizard.

the dialog. This enables user to visualize the support created

and enter the required dimensions accurately.

Goal Post Braced Cantilever Cantilever L Post Inverted L Post

www.cadison.com

?Clash detection & Bill of Material (BOM)

?Rendering and interference detection

?Real time visualization helps in efficient modeling of

Secondary Supports to avoid potential interference with

other plant objects

?BOM specific to plant area

?BOM based on type of supports

?BOM based on profile types

Edit Secondary Support

This feature enables the user to modify the existing support

in an easy manner. The edit feature recognizes the support

created using create support wizard. It will fetch the

parameters entered at the time of creation of support. Edit

feature will honor the insertion point selected by user at the

time of placement and recreate the structure as per updated

parameters. User can also add/remove base plate from

existing support.

Apart from maintaining backward compatibility, the Edit

Secondary Support feature enables the user to select the

structure created in previous versions to recreate as per the

additional validations incorporated in the latest version.

Report Generation

?Report generation feature of CADISON can be used to

generate list of supports at project level, in drawings etc.

?BOM of individual support or selected supports with in

drawing can be generated.

?All reports can be stored in the CADISON document

management with an active revision management system.

?Facility to create reports in background allows generating

reports without interrupting design process.

?Supports MS Word, Excel & PDF, generate multilingual

reports (English, German).

Hookup drawing

Hookup drawing feature enables the user to create automatic

production drawings of selected type of support/s. The user

can create hookup drawing for selected secondary support

as well as multiple supports of a specific type.

Each type of support has specific drawing template with

predefined typical to represent dimensions. There is a

provision to revise or replace typical to be displayed in

hookup drawing to suite organization needs and increase

adaptability for changing requirements of projects.

Number of columns and rows in hookup drawing table can

be configured in drawing templates. User can rearrange or

decide the number of columns of table as per organization

needs.