Huawei GENEX Series

System Structure of GENEX Nastar GSMModule DescriptionThis module is used to import data and it has the following TransDataAn import module functions: Browsing the results of the traffic statistic register Displaying the information of the current database Backdating the information of the current traffic statistic task Nastar (The main module) This module is the access end of Nastar and it has the

following functions:Querying the customized traffic statistic tasks Displaying the traffic statistic query results directly Analyzing the RNO topics NaConvert module (An collection With this module, you can obtain the traffic statistic data from BAM and upload the data to the server of Nastar.

The structure of GENEX Nastar GSM Local network mode: Offline mode:In this mode, it is not required to install a database. In this mode, you can only analyze neighbors and frequencies, but you cannot analyze the traffic statistic.

Online mode:In this mode, it is not required to install a database. In this mode, you can analyze the traffic statistic, neighbors, and frequencies. This mode, however, cannot provide such functions as intelligent reports and performance alarms in the version of server. In addition, it can only analyze the networks in a restricted size.

Customer/Server mode

Installation of the Data Collection Module Installation of IISControl Panel Add/Delete a Component Install IIS (Install FTP Service)

Install IIS

Set FTP

Install Naconvert

Installation of the Data Collection Module FTP SettingControl PanelManagement ToolsInformation ServiceFTP Site Creation

Installation of the Data Collection Module FTP User SettingMy Computer Computer Management Local Users and Groups Users

Installation of the Data Collection Module

Installation of NaconvertCopy Naconvert.exe and five DLLs (ziparch.dll, SHLWAPI.dll, MFC42.DLL, MSVCRT.DLL, and MSVCIRT.DLL) to \\OMC\BSC\BAM Copy Naconvert.ini to \\OMC\BSC\public\initfile

Setting of the configuration files

Installation of Nastar GSM Installation of Nastar Client

Installation of Nastar GSM Installation of GENEX Shared

Installation of SQL ServerThe required version: SQL Server Standard+sp3

Setting of SQL ServerStep1: Set the servicesStep2: Set Autostart

Step3: Set the connection property

Introduction to the data source Project parametersThese parameters must contain the parameters: Cell Name, BTS Longitude, BTS Altitude, LAC, CI, and Directional Angle

Configuration parametersThese parameters must contain the configuration data of the cell. They are saved in BAM and the path is: \BSC\BAM\dbf

Traffic statistic dataThese parameters are the basis of the performance analysis. They are saved in BAM and the path is: \BSC\BAM\appsvr\stats\data

Introduction to the Software InterfaceSite deletion Cell deletionNeighbor analysis Working area

Site adding

Site information edition

Cell query Attribute view window Co-BCCH Co-BSIC check

Idle frequency point check Spectrum utilization analysisFrequency point check according to the frequency point

Frequency point check according to the cell

Site view window

Project Management Create a project

Step1: Star Nastar Step2:Click Setting

Step3Click Add

Step4:Add Project Name

Step5:Set Project configuration information

Project Management Open a projectStep1: Choose Project->Open Project

Step2: Choose the new project

Step3: Click OK

Project ManagementProject setting

Set a project

Set the map Delete the project

User Management User authority managementStep1:Project->User Management

Step2:Right Click -> Add a User

Step3:Right click User -> Authority Setting

Step4:Authority setting

Data Management Data import import of configuration parameters and traffic statistic dataStep1Create a network

Step2Create a BSC

Step3Import data dynamically

Step4Import configuration data

Step5Import traffic statistic data

Data Management Data import Project parameter import

The following parameters must match each other: Cell Name, LAC, CI, BTS Longitude, BTS Altitude, and Antenna Directional Angel

Data Management Data Export

Select the data sources to be exported

Select the parameters to be exported

The analysis flow of Nastar GSM RNO

RNO AnalysisNetwork Optimize AnalysisImport Project Parameter Network Trend Analysis Trouble Shooting Network Monitor Neighbors Analysis Frequency Analysis Configuration Par. Check

Import Project Data

Import Statistic Data

Import Configuration Data

Analysis Report

Create Project

Start Nastar

Check of Configuration ParametersStep1:Analysis->RNP Check

Step2:Select the check objects

Step3:Select the check parameters

Frequency Analysis Co-channel and adjacent channel check check according to the cellStep1:Frequency Analysis-> Co-fre. Adj-fre. Check

Step2:Select the check options

Step3:Select the cells

Frequency Analysis Co-channel and adjacent channel check check according to the frequency pointStep1:Frequency Analysis-> Co-fre. Adj-fre. Check

Step2Set of the frequency arrange

Step3Set the frequency points to be checked

Frequency Analysis Co-BCCH Co-BSIC check

Step1Frequency Analysis-> Co-BCCH Co-BSIC Check

Step2:Set the check conditions

Step3:Display the check results

Frequency Analysis Idle frequency point check

Step1:Frequency analysis-> Idle ARFCNs

Step2: Select the analysis area

Step3:Set the analysis conditions

Step4:Display the analysis results

Frequency Analysis Spectrum utilization analysis

Step1:Frequency analysis-> Spectrum Utilization

Step2:Set the analysis conditions

Step3:Display the analysis results

Frequency Analysis Frequency optimizationStep1:Frequency analysis-> Check Frequency Optimization

Step2:Set the analysis conditions

Step3:Select the analysis objects

Neighbor Analysis Neighbor queryStep1:Neighbor analysis-> Neighbors

Step2:Select the original cells to be queried

Neighbor maintenanceStep1:Display the neighbors

Step2:Modify the neighbors Step3:Save the modified results

Neighbor Analysis Neighbor checkCheck unidirectional neighbors and cells with fewer neighbors in the whole networkStep1:Neighbors Analysis-> Check Unidirectional Neighbors Step2:Display the query results in a list Step3:Display the query results geographical

Step1:Neighbors Analysis-> Check cells with fewer neighbors

Step2:Set the number of the neighbors Step3:Display the check results

Neighbor Analysis Automatic neighbor planningStep1:Neighbors Analysis-> Neighbor Autoplaning

Step2:Set the antenna information Step3:Set the geographical type of the planning area

Step4:Set the attribute Step5:Export the planning results

Network Performance Monitoring Performance indicator alarmStep1:Right click to select the alarm indicators

Step2:Set the monitor time Step3:Select the monitor objects

Step4:Set the alarm conditions Step5:Select the monitor indicators Step6:Edit the monitor conditions

Custom performance monitor indicatorsStep1:Custom Alarm-> New Alarm Task Step2: Select the template

Network Performance Monitoring

Step3:Set the monitor conditions Step4:Select the monitor objects

Step5:Set the monitor objects

Introduction to performance monitoring reports Network performance monitoring report - TL

Network Performance Monitoring

Count the network performance indicators and analyze the trend of the network performance within a week

Network monitoring report - EngineerCount the TOP 10 cells in the network KPI indicator, accessability, mobility, retainability, and network resource utilization and analyze the traffic statistic in detail, thus realizing a deep location of the network problems

Network performance monitoring report Compare ReportCompare and analyze the network KPI indicators of two weeks, thus realizing the performance indicator monitoring after the network optimization

Network Performance MonitoringPerformance monitoring reportsStep1:Select the analysis objects

Step2:Select the report type Step3:Set the analysis time segment Step4: Define the VIC area

Step5:Set the query time

Network Performance Monitoring Customized monitoring reportsStep1:Peformance Analysis-> Report wizard Step2:Set the report type

Step3:Count and set the capacity indicatorsStep4:Set the TOPN capacity indicators

Step5:Set the indicator thresholds Step6:Set the drawing indicators Step7:Count and set the worst cells

Deep Location of Network Problems Topics of the deep location ofnetwork problems Analysis of the performance KPI indicatorsQuery cell/BSClevel KPI indicators, analyze the trend of KPI indicators, analyze the TOPN cells, and filter the cells

Analysis of the access performanceDeep location of access performance problems

Analysis of the retainability performanceAnalyze SDCCH/TCH call drops

Analysis of the TRX performanceAnalysis of TRX measurement reports

Analysis of the mobility performanceDeep location of handover problems

Implementation of the topic tasksStep1:Double click Task

Deep Location of Network Problems

Step2:Set the statistic time segment

Step3:Set the analysis objects

Analysis of the Traffic Statistic Enhanced traffic statisticStep1:Performance Analysis-> Traffic Statistic

Step2:Set the report name Step3:Set the statistic time and type

Step4:Set the busy hour and statistic type Step5:Set the statistic objects Step6:Set the statistic indicators

Analysis of the Network Resources Statistic of the network resourcesStep1:Project->Resource Stat.

Step2:Set the analysis arrange

Step3:Select the statistic objects

Optimization of the network resourcesStep1:Performance Analysis-> WRO Report

Analysis of the Network Resources

Step2:Set the parameters

Step3:Set the analysis objects